WCT0LR2201J WIFI+BT module User Manual

PRODUCTS USERMANUAL WCT0LR2201J WIFI+BT Module IEEE 802.11a/b/g/n/ac 2T/2R Model Number: WCT0LR2201J Product Description Interface Standard Model Product Name WIFI+BT Module 802.11a/b/g/n/ac WCTOLR2201J Product Features Product Specification Complies with IEEE 802.11g;

802.11b; 802.11n ; 802.11a ; 802.11ac standard for 2.4GHz and 5GHz Wireless LAN. TWO Transmit and TWO Receive path(2T2R) Supports Infrastructure modes Works with all existing network frastructure. Capable of up to 128-Bit WEP Encryption. Freedom to roam while staying connected. UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation. Operating SystemsWindows XP, Win7,Win8, Win10, Linux Low power consumption. The WCT0LR2201J is a high-gain and low power consumption wifi module . It fully complies with IEEE 802.11a/b/g/n/ac feature rich wireless connectivity at high standards,delivers reliable,cost-effective,throughput from an extended distance.When 3.3V, USB bus and GND were connected,This module is working. The Bluetooth part supports BLE 4.2+HS operation. QPSK,BPSK ,CCK(802.11b) QPSK,BPSK,16QAM ,64QAM with OFDM

(802.11g) BPSK,QPSK,16QAM ,64QAM with OFDM

(802.11n) QPSK,BPSK,16QAM ,64QAM with OFDM

(802.11a) QPSK,BPSK,16QAM ,64QAM, 256QAM with OFDM (802.11ac) 2.4GHz: CH 1~CH13 for FCC 5GHz: 5150~5250MHz, 5725~5850MHz

< 20dBm FS-mode Specification for Bluetooth Easy to install and configure. Bluetooth v4.2 LE+EDR;

1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,9 0,120 and maximum of 866.7Mbps Operating Temperature 0 ~ 60C ambient temperature Complies with PCI Express base specification revision 1.1 for WLAN 5 to 95 % maximum (non-condensing) Windows XP, Win7,Win8, Win10, Linux Complies with USB2.0

-40 ~ 80C ambient temperature Up to 300 meters in open space WEP, TKIP, AES, WPA, WPA2 WiFiPCIE BTUSB Storage Temperature Data Transfer Rate Modulation Method Operating Voltage Operation Range Frequency Band Operation Mode Transmit Power Infrastructure OS Support 3.3V10%

Humidity Security PAGE 1 Version 1.0 PRODUCTS USERMANUAL WCT0LR2201J FCC/Industry Canada Statement (to be placed on End Products) Federal Communications Commission (FCC) Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/PC technician for help. FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. IC Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne PAGE 2 Version 1.0 PRODUCTS USERMANUAL WCT0LR2201J doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Notice to OEM integrator The end user manual shall include all required regulatory information/warning as show in this manual. The OEM integrator is responsible for testing their endproduct for any additional compliance requirements required with this module installed. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The end product shall haves the words Contains Transmitter Module FCC ID: 2AC23-WCT0LR2201J, IC:

12290A-WCT0LR2201J. Le manuel de l'utilisateur final doit inclure toutes les informations / avertissements rglementaires requis comme montr dans ce manuel. L'intgrateur OEM est responsable de tester son produit final pour toute exigences de conformit supplmentaires requises avec ce module install. Si l'ID FCC n'est pas visible lorsque le module est install dans un autre priphrique, alors l'extrieur de l'appareil dans lequel le module est install doit galement afficher une tiquette se rfrant au module ci-joint. Le produit final doit avoir les mots Contient le module de transmetteur FCC ID: 2AC23-WCT0LR2201J, IC:

12290A-WCT0LR2201J PAGE 3 Version 1.0