WCT54 WIFI+BT Module User Manual

Hui Zhou Gaoshengda Technology Co., LTD WCT54M2001 PRODUCT MODEL (HVIN): WCT54M2001 PRODUCT DESCRIPTION (PMN): WIFI+BT Module SAFETY REGYLATION:

1. shall not arbitrarily change the frequency of transmission, increase the transmission power

(including the installation of radio frequency power amplifier);

2. it is not allowed to cause harmful interference to all kinds of legal radio communication. Once it is found that there is interference, it should be stopped immediately, and measures can be taken to eliminate interference before continuing to use it;

3. must be able to resist radiation interference of various radio or industrial / scientific / medical applications;

4. may not be used near airplane or airports. NOTICE:

1. please keep this product and accessories attached to the places which children can't touch;

2. do not splash water or other liquid onto this product, otherwise it may cause damage;

3. do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction;

4. please keep this product away from flammable or naked flame;

5. please do not repair this product by yourself. Only qualified personnel can be repaired. FEATURES:

1. Compatible with IEEE 802.11b standard to provide wireless 11Mbps date rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps date rate. Compatible with IEEE 802.11a standard to provide wireless 54Mbps date rate. Compatible with IEEE 802.11n standard to provide wireless 300Mbps date rate. Compatible with IEEE 802.11ac standard to provide wireless 866.7Mbps date rate. 2. Support 20MHz, 40MHz, 80MHz in 5GHz band, and 20MHz,40MHz bandwidth in 2.4GHz band 3. The modulation type are DQPSK,DBPSK and CCK with DSSS to 802.11b;

QPSK,BPSK,16QAM,64QAM with OFDM to 802.11g/a/n;

QPSK,BPSK,16QAM,64QAM,256QAM with OFDM to 802.11ac;

4. Supports Bluetooth V2.1/3.0/4.2/5.0 5. Supports external PA and LNA with control logics. 6. Operation at 2.4~2.4835GHz, 5.15~5.25GHz, 5.725~5.85GHz frequency band to meet worldwide regulations. 7. Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility. 8. Friendly user configuration and diagnostic utilities 9. Drivers support Windows7.LINUX 10. High speed USB 2.0 interface for WLAN 11. RoHS compliant 12. Transmit power no more than 1000mW 13. Voltage is 3.3VDC PAGE 1 OF 6 Hui Zhou Gaoshengda Technology Co., LTD WCT54M2001 Compliance Information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. FCC Radiation Exposure Statement This transmitter must not be co-location or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 7.9 inches (20 cm) between the radiator and your body. PAGE 2 OF 6 Hui Zhou Gaoshengda Technology Co., LTD WCT54M2001 If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2AC23-WCT54 Or Contains FCC ID: 2AC23-WCT54 When the module is installed inside another device, the user manual of the host must contain below warning statements;

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with limit modular approval should perform the test of radiated & conducted emission and spurious emission,etc. according to FCC part 15C : 15.247 and 15.209 & 15.207 and FCC Part 15E: 15.407, 15B Class B requirement, Only if the test result comply with FCC part 15C : 15.247 and 15.209 & 15.207 ,15B Class B requirement and part 15E: 15.407then the host can be sold legally. CFR 47 FCC PART 15 SUBPART C (15.247) and SUBPART E (15.407) has been investigated. It is applicable to the modular transmitter This radio transmitter 2AC23-WCT54 has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. unique antenna connector (IPX) must be used on the Part 15 authorized transmitters used in the host product. PAGE 3 OF 6 Hui Zhou Gaoshengda Technology Co., LTD WCT54M2001 5G wifi Antenna:

Antenna No. Frequency (MHz) Antenna Type Max Antenna Gain (dBi) 0 1 5150-5250,5725-5850 5150-5250,5725-5850 PIFA Antenna 2.13 2.13 2.4G wifi Antenna:

Antenna Frequency (MHz) Antenna Type Antenna Gain (dBi) 0 1 2412-2462 2412-2462 PIFA Antenna PIFA Antenna 4.74 4.74 Bluetooth Antenna:

Ant. 1 Frequency (MHz) Antenna Type Antenna Gain (dBi) 2402-2480 PIFA Antenna 4.74 PAGE 4 OF 6 Hui Zhou Gaoshengda Technology Co., LTD WCT54M2001 Canadian ISED Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operationof the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The device is going to be operated in 5150~5350MHz frequency range. It is restricted indoor environment only. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. ISED Radiation Exposure Statement:

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 7.9 inches (20 cm) between the radiator

& your body. Le prsent appareil est conforme de ce matriel aux conformits ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondante. PAGE 5 OF 6 Hui Zhou Gaoshengda Technology Co., LTD WCT54M2001 Notice to OEM integrator Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 20cm from persons. The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as show in this manual. Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B, ICES 003. Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter when the module is installed in the host. Must have on the host device a label showing Contains FCC ID: 2AC23-WCT54 The use condition limitations extend to professional users, then instructions must state that this information also extends to the host manufacturers instruction manual. This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. l'hte doit utiliser l'instrument uniquement dans des dispositifs qui rpondent la fcc / (catgorie d'exposition rf mobile, ce qui signifie le dispositif est install et utilis une distance d'au moins 20 cm de personnes. le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen dclarations de conformit relatives l'metteur que de montrer dans ce manuel. le fabricant est responsable de la conformit de l'hte, le systme d'accueil avec le module install avec toutes les autres exigences applicables du systme comme la partie 15 b, ices - 003. accueillir le fabricant est fortement recommand de confirmer la conformit avec les exigences de la fcc / (metteur lorsque le module est install dans l'hte. le dispositif d'accueil doivent avoir une tiquette indiquant contient FCC ID: 2AC23-WCT54 PAGE 6 OF 6