| submitted | available | document details (if available) | source link |
|---|---|---|---|
| February 03 2016 | February 03 2016 | WT39M2011 Usermanual Administrator pdfFactory Pro 4.50 (Windows XP Professional x86 Chinese) |
| various | User Manual | Users Manual | 1.43 MiB | February 03 2016 |
PRODUCTS USERMANUAL WT39M2011 WIFI+BT Module IEEE 802.11b/g/n/a 2T/2R +Bluetooth Model Number: WT39M2011 Product Description Interface Standard 12pin Interface 802.11b/g/n /a Model Product Name WT39M2011 WIFI+BT Module Product Features Product Specification Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60 TCL WT39M2011 is a high-gain and low power consumption wifi module . It fully complies with IEEE 802.11n and IEEE 802.11b/g/a feature rich wireless connectivity at high standards,delivers reliable,cost-effective,throughput from an extended distance.When 5V, USB bus and GND were connected,This module is working. The Bluetooth part supports latest 4.0+HS operation. Complies with IEEE 802.11g;
802.11b; 802.11n ; 802.11a standard for 2.4GHz and5GHz Wireless LAN. TWO Transmit and TWO Receive path(2T2R) Supports Ad-Hoc/Infrastructure modes Works with all existing network nfrastructure. Capable of up to 128-Bit WEP Encryption. Freedom to roam while staying connected. UP to 300 Mbps High-Speed Transfer Rate in 802.11n mode of operation. Operating SystemsWindows XP 32/64,2000,Windows 7,Vista 32/64,Linux,Macintosh Low power consumption. Easy to install and configure. Bluetooth v4.1 Low Energy(LE);
Bluetooth specification v2.1+EDR;
QPSK , BPSK , 16QAM ,64QAM with OFDM (802.11g) BPSK , QPSK , 16QAM ,64QAM with OFDM(802.11n) QPSK , BPSK , 16QAM ,64QAM with OFDM (802.11a) 2.4GHz: CH 1~CH11 for FCC 5GHz: 5150~5250MHz, 5725~5850MHz Bluetooth: 2402~2480 MHz
< 18dBm Windows XP 32/64,2000,Windows 7,Vista 32/64,Linux,Macintosh WEP, TKIP, AES, WPA, WPA2 Operating Temperature Storage Temperature Humidity Modulation Method QPSK , BPSK , CCK(802.11b) 5 to 90 % maximum (non-condensing)
,90,120 and maximum of 300Mbps
-55 ~ 125C ambient temperature
-10 ~ 70C ambient temperature Up to 300 meters in open space Ad hoc, Infrastructure Operating Voltage Operation Range Frequency Band Operation Mode Transmit Power OS Support Security 5V10%
PAGE 1 OF 3 Version 1.0 PRODUCTS USERMANUAL WT39M2011 FCC Important Notes:
(1) FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
(2) Co-location Warning:
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
(3) OEM integration instructions:
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed
(for example, digital device emissions, PC peripheral requirements, etc.).
(4) Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
(5) End product labeling:
The final end product must be labeled in a visible area with the following:
Contains Transmitter Module FCC ID: 2AC23-WT39M2011.
(6) Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. PAGE 2 OF 3 Version 1.0 PRODUCTS USERMANUAL WT39M2011 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. IC Statement
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device."
The final end product must be labeled in a visible area with the following:
Contains Transmitter Module IC: 12290A-WT39M2011.
- French:"
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
PAGE 3 OF 3 Version 1.0 WIFI BT WIFI Installation instructions:(BT Installation see another file) 1 Double- click the folder:
MT7662U_QA_Tool_V1.0.3.0 2 wifi Insert the wifi module 3 BT BT WIFI If there is any driver needed, please choose the folder mentioned by step1.(Skip the BT Hardware Installation, otherwise there will be blue screen. The BT driver and WIFI driver should better be installed separately.) 4The Installation is complete. Test software for use:
1 Click the icon 2 Enter the following interface 3 Select the Channel 4 Select the Rate 5 Select the Bandwidth 6 start testing According to the setup outlined in red click the Start TX 7 Start Testing MT7662 BT Tool MT7662 BT Tool User Manual User Manual User Manual User Manual V0.1 Copyright MediaTekInc. All rights reserved. History History Version Date V0.0 2013/07/18 Author Description Create the file. William V0.1 2013/08/07 William UpdateReal com relay SOP. Agenda Agenda SOP-How to install USB BT Tool and Driver Update USB driver:
Update USB driver_Method_A Update USB driver_Method_B BT Tool in WCN Combo Tool:
COM and Download patch COM and Download patch SOP -How to use BT Tool BT Tool:
1. Setting page for Bluetooth Test-Mode 2. RF Test page for BR & EDR TX-Mode 3. BLE Test mode page for LE TX/RX-Mode 4. Non-signaling RX Test page for BR & EDR RX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode How to install USB BT Tool and Driver How to install USB BT Tool and Driver How to install USB BT Tool and Driver How to install USB BT Tool and Driver SOPSOP--
Copyright MediaTekInc. All rights reserved. Update USB driver Update USB driver 1. Plug in the USB DUT 2. Go to the Device Manager 3. Select BT device to install BT driver. 1 Click right of the mouse over Computer 1 Click right of the mouse over Computer 2 3 4 Update USB driver (Cont.) Update USB driver (Cont.) 5 Update USB driver_Method_A Update USB driver_Method_A 6 Please according to your OS type to choose the related folder or Update USB Update USB driver_Method_A driver_Method_A(cont.)
(cont.) 77 8 9 Test driver update successfully!
Update USB driver_Method_B Update USB driver_Method_B 6 Update USB Update USB driver_Method_B driver_Method_B(Cont.)
(Cont.) 7 Update USB Update USB driver_Method_B driver_Method_B(Cont.)
(Cont.) 9 8 Choose the folder according to your OS type Update USB Update USB driver_Method_B driver_Method_B(Cont.)
(Cont.) 10 Select this driver 11 Update USB Update USB driver_Method_B driver_Method_B(Cont.)
(Cont.) 1212 13 14 Test driver update successfully!
WCN Combo Tool WCN Combo Tool Install BT tool: WCN_Combo_Tool_Setup.exe Please put the license file
(DTfile) in the combo tool execution file folder after the installation. BT Tool in WCN Combo Tool BT Tool in WCN Combo Tool Execute WCN_Combol_Tool PS. Set WCN_Combo_Tool Compatible to Windows XP if your OS is WIN7 or WIN8 1 BT Tool in WCN Combo Tool (cont.) BT Tool in WCN Combo Tool (cont.) 2 Run as administrator if your OS is WIN7 or WIN8 BT Tool in WCN Combo Tool (Cont.) BT Tool in WCN Combo Tool (Cont.) 3 55 4 6 BT Tool in WCN Combo Tool (Cont.) BT Tool in WCN Combo Tool (Cont.) Click Browse button to choose suitable patch file. Click Download button to download patch. A dialog window will pop up to inform the result of download procedure. 7 9 8 BT Tool in WCN Combo Tool (Cont.) BT Tool in WCN Combo Tool (Cont.) this specific COM port number is the same as step4 in previous pages. Select this specific COM port number first. Click Open to open BT COM port ; click Close to close BT COM port. Remember to click RESET Device after BT COM port is opened. 10 11 12 19 SOP --How to use BT Tool SOP How to use BT Tool Copyright MediaTekInc. All rights reserved. BT Tool in WCN Combo Tool BT Tool in WCN Combo Tool BT Tool:
1.Setting page for Bluetooth Test-Mode 2.RF Test page for BR & EDR TX-Mode 3.BLE Test mode page for LE TX/RX-Mode 4.Non-signaling RX Test page for BR & EDR RX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode How to use BT Tool How to use BT Tool BT Tool:
1.Setting page for Bluetooth Test-Mode 2.RF Test page for BR & EDR TX-Mode 3.BLE Test mode page for LE TX/RX-Mode 4.Non-signaling RX Test page for BR & EDR RX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode Open / Close COM ReadBD Address Enter Test Mode ReadReadBD Address BD Address 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Click Read button. 3. BD Address is updated 1 2 3 23 Enter Test Mode Enter Test Mode 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Click Enter DUT button to allow DUT to enter test mode. 3. The connection between DUT and test set (ex: CBT) could be established under test mode. 2 24 Agenda Agenda BT Tool:
1.Setting page for Bluetooth Test-Mode 2.RF Test page for BR & EDR TX-Mode 3.BLE Test mode page for LE TX/RX-Mode 4.Non-signaling RX Test page for BR & EDR RX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode Reset Device BR & EDR TX Mode Tx Power Control Hopping/Single Frequency Reset Device Reset Device Ensure BT COM port is opened and RESET Device button is clicked. 1. 2. Click Reset Device button to Reset DUT. 3. HCI RX event is responded (RX: 0E 04 01 03 0C 00) 1 26 BR & EDR TX Mode BR & EDR TX Mode Ensure BT COM port is opened and RESET Device button is clicked. Set pattern type, packet type, and signal Frequency. And then Click Start button. 1. 2. 3. Check Tx power of DUT by test set (ex: CBT). 4. Click Stop button to end test. 1 27 Tx Power Control Tx Power Control Ensure BT COM port is opened and RESET Device button is clicked. Set pattern type, packet type, and signal Frequency. And then Click Start button. 1. 2. 3. Check Tx power of DUT by BT test set (ex: CBT). 4. Select Tx Power Level to 6~0, and then see if TX power is correspondly changed. 1 1 3 28 Hopping Hopping Select Frequency Hopping, and then see if TX signal is present on spectrum analyzer correctly.
* RBW 1 MHz VBW 3 MHz SWT 2.5 ms Marker 2 [T1 ]
4.69 dBm 2.480000000 GHz Marker 1 [T1 ]
3.72 dBm 2.402000000 GHz 2 A LVL 3DB Ref 10 dBm 101 Offset 1 dB Att 40 dB 1 PK MAXH 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center2.45 GHz 10 MHz/
Span100 MHz Frequency Hopping 29 Single Frequency Single Frequency Select Single Frequency, and then change the channel number
(00~78) ,TX signal is present on spectrum analyzer correspondingly. Ref 10 dBm 101 Offset 1 dB Att 40 dB RBW 3 MHz VBW 10 MHz SWT 2.5 ms Marker 1 [T1 ]
3.98 dBm 2.402000000 GHz Ref 10 dBm 10 Offset 1 dB Att 40 dB 1 RBW 3 MHz VBW 10 MHz SWT 2.5 ms Marker 1 [T1 ]
4.35 dBm 2.441000000 GHz Ref 10 dBm 10 Offset 1 dB Att 40 dB RBW 3 MHz VBW 10 MHz SWT 2.5 ms Marker 1 [T1 ]
4.87 dBm 2.480000000 GHz 1 1 PK MAXH 0 0
-10
-20
-30
-40
-50
-60
-70
-80 1 PK MAXH A A LVL 3DB 0 0
-10
-20
-30
-40
-50
-60
-70
-80 A A LVL 3DB 1 PK MAXH 0 0
-10
-20
-30
-40
-50
-60
-70
-80 A A LVL 3DB
-90 Center2.45 GHz 10 MHz/
Span100 MHz
-90 Center2.45 GHz 10 MHz/
Span100 MHz
-90 Center2.45 GHz 10 MHz/
Span100 MHz 0ch 39ch 78ch Agenda Agenda BT Tool:
1.Setting page for Bluetooth Test-Mode 2.RF Test page for BR & EDR TX-Mode 3.BLE Test mode page for LE TX/RX-Mode 4.Non-signaling RX Test page for BR & EDR RX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode 5. TX tone Test page for BR/EDR/LE continuous TX-Mode BLE Test Mode TX BLE Test Mode RX BLE Test Mode BLE Test Mode --TXTX 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Set RF channel and Pattern type on CBT to analyze DUT TX performance. 3. Select TX frequency (00~39) and Tx pattern. Then click Start button. 4. TX signal is present on CBT correspondingly. 5. Click Stop button to end LE TX test. 3 BLE Test Mode BLE Test Mode --RXRX 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Set Rx Level, RF channel, and Pattern Type on CBT. Then Turn on generator. 3. Select RX frequency (00~39) and Rx pattern. Then click Start button. 4. Click Stop button. PER result are shown in below. 3 4 Agenda Agenda BT Tool:
1.Setting page for Bluetooth Test-Mode 2.RF Test page for BR & EDR TX-Mode 3.BLE Test mode page for LE TX/RX-Mode 4.Non-signaling RX Test page for BR & EDR RX-Mode 5.TX tone Test page for BR/EDR/LE continuous TX-Mode NonNon--Signaling Signaling RX Test RX Test 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Set Rx Level, RF channel, Packet Type, Pattern Type, and BD address (ex:
000000A5F0C3) on CBT. Then Turn on generator. 3. Select Rx pattern, RX frequency (00~78), Packet Type, and Tester Address (ex:
000000A5F0C3, please fill 00A5F0C3). Then click Enter Test button. 4. Click End Test button. PER/BER result are shown in right side. 3 4 Agenda Agenda BT Tool:
1.Setting page for Bluetooth Test-Mode 2.RF Test page for BR & EDR TX-Mode 3.BLE Test mode page for LE TX/RX-Mode 4.Non-signaling RX Test page for BR & EDR RX-Mode 5.TX tone Test page for BR/EDR/LE continuous TX-Mode
(CW mode TX) Modulation Tone Single Tone
(Continuous mode TX) Single Tone Single Tone CW tone TX (No modulated signal) 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Select Tone Type (ex: Single_Tone_DC), and then change the channel number
(00~78) 3. Click Enter Test button. TX signal is present on spectrum analyzer correspondingly. 4. Click HCI Reset button to end test. 1 1 2
*
Att 30 dB
* RBW 10 kHz VBW 30 kHz SWT 20 ms Marker 1 [T1 ]
8.81 dBm 2.401992000 GHz 1 A Ref 20 dBm 20 20 1 PK MAXH 2 AP CLRWR 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center2.402 GHz 200 kHz/
Span2 MHz Modulation Tone Modulation Tone Continuous mode TX 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Select Modulation_Tone, and then change the channel number (00~78). Choose mode (BT-GFSK/EDR or LE) and Modulation rate (1M/2M/3M) 3. Click Enter Test button. TX signal is present on spectrum analyzer correspondingly. 4. Click HCI Reset button to end test. 1 1 2
*
Att 30 dB
* RBW 10 kHz VBW 30 kHz SWT 20 ms Marker 1 [T1 ]
8.81 dBm 2.401992000 GHz 1 A Ref 20 dBm 20 20 1 PK MAXH 2 AP CLRWR 10 0
-10
-20
-30
-40
-50
-60
-70
-80 Center2.402 GHz 200 kHz/
Span2 MHz Real COM Relay Real COM Relay 2016/2/16 Copyright MediaTek Inc. All rights reserved. 39 Copyright MediaTekInc. All rights reserved. Real COM Relay (1/3) Real COM Relay (1/3) Test setup:
Relay RS232 data by PC:
1. USB to RS232 + Cross TX/RX cable 2. USB for DUT RS232 DUT Copyright MediaTek Inc. All rights reserved. 2016/2/16 40 BT test set
(CBT) Real COM Relay USB USB PC RS232 cable RS232 Cross TX/RX Cross TX/RX RS232 USB to RS232 cable DUT Real COM Relay (2/3) Real COM Relay (2/3) 1. Ensure BT COM port is opened and RESET Device button is clicked. 2. Click Enter DUT button to allow DUT to enter test mode. 3. Close BT COM port. Click Stop Relay. 4. Click Config Use virtual COM 5. Select COM port of USB to RS232 cable for example: COM 1 for USB to RS232 cable, please choose COM1 Copyright MediaTek Inc. All rights reserved. 2016/2/16 41 Real COM Relay (3/3) Real COM Relay (3/3) 1. Click Start Relay button for Real COM relay. Copyright MediaTek Inc. All rights reserved. 2016/2/16 42 Copyright MediaTekInc. All rights reserved.
This product uses the FCC Data API but is not endorsed or certified by the FCC