Hui Zhou Gaoshengda Technology Co., LTD W2RM2510F WIFI Module IEEE 802.11 b/g/n 2T/2R Model Number: W2RM2510F Product Descrition The W2RM2510F is a 2.4GHz 22 MIMO WIFI module. This module provides a high level of integration with a dual-stream IEEE 802.11n MAC/ base band /radio.The WLAN operation supports 20MHz,40MHz channels for data rates up to 300Mbps. It fully complies with IEEE 802.11 b/g/n feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an extended distance. Product Features Complies with IEEE 802.11b/g/n for 2.4GHz Wireless LAN. Two transmit and Two receive path(2T2R) Works with all existing network nfrastructure. Capable of up to 128-Bit WEP Encryption. Freedom to roam while staying connected. UP to 300 Mbps High-Speed Transfer Rate in 802.11n mode of operation. Operating SystemsLinux,Win7, Win8, Win10,XP Low power consumption. Easy to install and configure. High speed USB 2.0 interface ROHS compliant Product Specification WIF Module Model Product Name Standard Interface W2RM2510F 802.11 b/g/n USB Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90 and maximum of 300Mbps Modulation Method Frequency Band Frequency Range:
Antenna Type:
Antenna Gain:
Operation Mode Security Operating Voltage Current Consumption Antenna Type DQPSK,DBPSK,CCK(802.11b) QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n-HT20) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n-HT40) 2400~2483.5 MHz 2412~2462 MHz PIFA Antenna Chain 0 Chain 1 Infrastructure 3dBi 3dBi WEP, TKIP, AES, WPA, WPA2 3.3V10%
1000mA PIFA Operating Temperature
-10 ~ 70C ambient temperature Storage Temperature
-40 ~ 80C ambient temperature Humidity 5 to 95 % maximum (non-condensing) PAGE 1 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD W2RM2510F NOTICE:
please keep this product and accessories attached to the places which children can't touch;
do not splash water or other liquid onto this product, otherwise it may cause damage;
do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction;
please keep this product away from flammable or naked flame;
please do not repair this product by yourself. Only qualified personnel can be repaired. FCC Statement:
FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If power exceeds the limit and the distanceOver 20cm distance in actual use between the device and user is compliant with the requirement PIFA antenna with Gain 3dBi FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Notice to OEM integrator Any company of the host device which install this modular with unlimit modular approval should perform the tast of radiated & conducted emission and spurious emission, etc. according to FCC part 15C: 15.247 and 15.209
& 15.207, 15B Class B requirement, only if the test result comply with FCC part 15C: 15.247 and 15.209 &
15.207, 15B Class B requirement, then the host can be sole legally. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The end product shall haves the words Contains Transmitter Module FCC ID: 2AC23-W2R. The device must be professionally installed The intended use is generally not for the general public.It is generally for industry/commercial use. The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not normally required. the user has no access to the connector. Installation must be controlled. Installation requires special training When the module is instaed inside another device, the user manual of the hose contain below warning statement:
1) This device may not cause harmful interference. 2) Thhis device must accept any interference received, including interference that may cause undesiredoperation. PAGE 2 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD W2RM2510F Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
1)L'appareil ne doit pas produire de brouillage;
2)L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Please notice that if the ISED certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC:12290A-W2R any similar wording that expresses the same meaning may be used. l'appareil hte doit porter une tiquette donnant le numro de certification du module d'Industrie Canada, prcd des mots Contient un module d'mission , du mot IC:12290A-W2R ou d'une formulation similaire exprimant le mme sens, comme suit The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 etla conformit de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformit de rf. l'exposition This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. CE Statement Herby, Hui Zhou Gaoshengda Technology Co., LTD declares that this WIFI ModuleW2RM2510F is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU member states. Use the WIFI Module in the environment with the temperature between -10 and 70 Operation Frequency: 2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20)) Max output power: WIFI: 0.0499W 2422MHz~2462MHz (802.11n(HT40)) ManufacturerHui Zhou Gaoshengda Technology Co., LTD AddressNO.75 Zhongkai Development Area, Huizhou, Guangdong, China Tel: +86-0752-2096698 Fax: +86-0752-2096698 E-mail: guanh@gaosd.cn PAGE 3 OF 4 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD W2RM2510F DECLARATION OF CONFORMITY I hereby declare that the product Product:
Product Name: WIFI Module Model: W2RM2510F Brand Name: GSD Hardware Version: V1.0 Software Version: V0.13
(Name of product, type or model, batch or serial number) satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU:and declare that the same application has not been lodged with any other notified body. EN 62368-1:2014+A11:2017 EN 62311:2008 Draft ETSI EN 301 489-17 V3.2.0 (2017-03) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 300 328 V2.2.2 (2019-07)
(Title(s) of regulations, standards, etc.) All essential radio test suites have been carried out. NOTIFIED BODY: MiCOM Labs Inc Address:
575 Boulder Court, Pleasanton, California94566 USA Identification Number: 2280 MANUFACTURER or AUTHORISED REPRESENTATIVE:
Address:
Hui Zhou Gaoshengda Technology Co., LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Point of contact:
Hui Guan, +86-0752-2096698/+86-0752-2096698
(Name, telephone and fax number) 2019-11-13
(Place, date of issue)
(Signature) Hui Guan, N/A
(Name and title in block letters) PAGE 4 OF 4 Version 1.0