all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manual | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 473.61 KiB | May 19 2016 | |||
1 |
|
Internal Photos | Internal Photos | 153.39 KiB | May 19 2016 | |||
1 |
|
External Photos | External Photos | 172.81 KiB | May 19 2016 | |||
1 |
|
Label | ID Label/Location Info | 19.98 KiB | May 19 2016 | |||
1 |
|
Label Location | ID Label/Location Info | 108.86 KiB | May 19 2016 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 28.05 KiB | May 19 2016 | |||
1 | Block Diagram | Block Diagram | May 19 2016 | confidential | ||||
1 |
|
Confidentiality Request | Cover Letter(s) | 31.06 KiB | May 19 2016 | |||
1 |
|
Data Sheet | Cover Letter(s) | 389.00 KiB | May 19 2016 | |||
1 |
|
FCC Ad-Hoc Declaration | Cover Letter(s) | 28.37 KiB | May 19 2016 | |||
1 |
|
Modular Approval Request | Cover Letter(s) | 159.15 KiB | May 19 2016 | |||
1 | Operational Description | Operational Description | May 19 2016 | confidential | ||||
1 |
|
RF Exposure Report | RF Exposure Info | 108.42 KiB | May 19 2016 | |||
1 | Schematics | Schematics | May 19 2016 | confidential | ||||
1 |
|
Test Report | Test Report | 1.82 MiB | May 19 2016 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 146.28 KiB | May 19 2016 |
1 | Users Manual | Users Manual | 473.61 KiB | May 19 2016 |
PRODUCT SPECIFICATION Version 2.1 IEEE 802.11 b/g/n 1T1R USB Module Model Number:WF75RL1510C P/N: 07-MT7601-MA0G CMIIT ID:2014DP6213 2.4G channel 1-13
( Media Tek MT7601U ) Custom Name Department Approval Custom Approval Section Date DESIGN 20151210 CHECK 20151210 APPROVAL 20151210 HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 75 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL07522096628 E-mail gaoz@gaosd.cn PRODUCTS SPECIFICATION WF75RL1510C Document revision history Rev. Date Author Reason for Changes Version 1.0 2014-09-03 Version 1.1 2014-09-16 Version 1.2 2014-12-18 Version 1.3 2015-01-27 Version 1.4 2015-09-20 Version 2.0 2015-12-10 Version 2.1 2016-01-06 Draft Adding shield cover Adding P/N No. Adding CMIIT ID Update the label info Edited 11b frequency range PowerEN edited GI edited+ FCC Statement page 2 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 1. Brief Description This document is to specify the product requirements for 802.11 b/g/n USB Module. This Module is based on Media Tek MT7601U chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4G-2.5GHz,and it can be used to provide up to 54Mbps for 802.11g,11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11 b, 802.11 g, 802.11n Access Points through the wireless LAN. 2. Features Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate. Compatible with IEEE 802.11n standard to provide wireless 150Mbps data rate.
Operation at 2.4G-2.5GHz frequency band to meet worldwide regulations
Supports WEP ,WPA ,WPA2,TKIP,AES enhanced security
Drivers support Windows XP 32/64, 2000, 7,Vista 32/64, linux 0S
High speed USB 2.0 interface ROHS compliant page 3 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section 3.2.1.1 3.2.1.2 3.2.1.3 Feature Standard Radio and Modulation Schemes Operating Frequency Detailed Description IEEE 802.11b DQPSK , DBPSK , DSSS , and CCK 2400 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries 14 channels for Japan 11,5.5,2,and 1Mbps CSMA/CA with ACK Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25degree C 17dBm(2dB) at 1,2,5.5,11Mbps page 4 of 12 Version 2.1 3.2.1.4 Channel Numbers 3.2.1.5 3.2.1.6 Media Access Data Rate Protocol Transmitter Output Power at Antenna Connector 3.2.1.7 PRODUCTS SPECIFICATION WF75RL1510C 3.2.1.8 Receiver Sensitivity at Antenna Connector Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8%
-76 dBm at 2Mbps
-76 dBm for 11Mbps 3.2.2 IEEE 802.11g Section 3.2.2.1 3.2.2.2 3.2.2.3 Feature Standard Radio and Modulation Type Operating Frequency 3.2.2.4 Channel Numbers 3.2.2.5 3.2.2.6 Media Access Data Rate Protocol 3.2.2.7 Transmitter Output Power at Antenna Connector 3.2.2.8 Receiver Sensitivity at Antenna Connector 3.2.3 IEEE 802.11n Section 3.2.3.1 3.2.3.2 3.2.3.3 Feature Standard Radio and Modulation Type Operating Frequency 3.2.3.4 Data Rate(Mbps) Detailed Description IEEE 802.11g QPSK , BPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz ISM band 11 channels for United States 13 channels for Europe Countries 13 channels for Japan 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain, Data Rate and at roomTemp. 25degree C
+17 dBm at 6,9Mbps
+16 dBm at 12,18Mbps
+15 dBm at 24,36Mbps
+14 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25 degree C
-82 dBm at 6Mbps
-81 dBm at 9Mbps
-79 dBm at 12Mbps
-77 dBm at 18Mbps
-74 dBm at 24Mbps
-70 dBm at 36Mbps
-66 dBm at 48Mbps
-65 dBm at 54Mbps Detailed Description IEEE 802.11n BPSK , QPSK , 16QAM ,64QAM with OFDM 2400 2483.5MHz page 5 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C MCS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GI=800ns 20MHz 6.5 13 19.5 26 39 52 58.5 65 13 26 39 52 78 104 117 130 40MH 13.5 27 40.5 54 81 108 121.5 135 27 54 81 108 162 216 243 270 GI=400ns 20MHz 7.2 14.4 21.7 28.9 43.3 57.8 65.0 72.2 14.444 28.889 43.333 57.778 86.667 115.556 130.000 144.444 40MHz 15 30 45 60 90 120 135 150 30 60 90 120 180 240 170 300 3.2.3.5 Media Access 3.2.3.6 Protocol Transmitter Output Power at Antenna Connector 3.2.3.7 Receiver Sensitivity at Antenna Connector CSMA/CA with ACK Typical RF Output Power(tolerance2dB) at each RF chain,Data Rate and at roomTemp. 25degree C HT-20 142dBm at MCS0~15 HT-40 142dBm at MCS0~15 Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate=10%
and at roomTemp. 25degree C HT-20
-82dBm at MCS0/8
-79dBm at MCS1/9
-77dBm at MCS2/10
-74dBm at MCS3/11
-70dBm at MCS4/12
-66dBm at MCS5/13
-65dBm at MCS6/14
-64dBm at MCS7/15 HT-40
-79dBm at MCS0/8
-76dBm at MCS1/9
-74dBm at MCS2/10
-71dBm at MCS3/11
-67dBm at MCS4/12
-63dBm at MCS5/13
-62dBm at MCS6/14
-61dBm at MCS7/15 page 6 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 4. Electrical and Thermal Characteristics 4.1 Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 General Section Units C C C
+80 60 125
-40 0 0 Maximum Minimum Detailed Description Integrated antenna 5.0V10%
230mA at continuous transmit mode 190mA at receive mode w/o receiving packet High Speed USB2.0 Interface Windows XP 32/64, 2000, 7,Vista 32/64, linux 0S WEP ,WPA ,WPA2,TKIP,AES Feature Antenna Type Operating Voltage Current Consumption USB 5.2.1 5.2.2 5.2.3 5.2.4 4.3 Software Requirements Driver Security 4.3.1 Information 4.3.1.1 Feature General Information 4.3.1.2 4.3.1.3 Current Link Information Site survey Detailed Description General Information shows the name of Wireless Adapter,Adapter MAC Address,Regulatory Domain,Firmware Version,and Utility Version. Current Link Information shows the C To search the neighboring access points and display the information of all access points. page 7 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 4.3.2 Mechanical Requirements Feature Length 4.3.2.1 4.3.2.2 Width 4.3.2.3 Height 4.3.3 Environmental Requirements 4.3.3.1 Feature Operating Temperature Conditions The product is capable of continuous reliable operation when operating Detailed Description 36mm(PCB) 22mm(PCB) 1.0mm(PCB) Detailed Description in ambient temperature of 0C to + 45C . Neither subassemblies is damaged nor the operational performance is degraded when restored to the operating temperature after exposing to storage temperature in the range of -20C to + 75C . The product is capable of continuous reliable operation when subjected to relative humidity in the range of 10% and 90% non-condensing. The product is not damaged nor the performance is degraded after exposure to relative humidity ranging from 5% to 95% non-condensing 4.3.3.2 Non-Operating Temperature Conditions 4.3.3.3 Operating Humidity conditions Non-Operating Humidity Conditions 4.3.3.4 page 8 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C 5 Connector Definition 15-Pin 1.25mm connectorHorizontal Type Pin 1 Definition Power-en 2 GND 3 D+
4 D-
5 Vcc
`
*TLERANCES ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED
*UNIT:mm page 9 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 1 : Schematic D N G D N G 2 4 3 C 1 F p 7 4 D N G D N G 12 2
. 5 x 3 5
. 2U 43 z H M 0 4
/
L A T X 0 _ O X m1 h o 0 9 R 2 I X O X N _ T S R D V 3
. 3 K 0 5 1 7 R 6 1 C F u 1
. 0 1 2 1 2 D N G D V 3
. 3 1 D V 3
. 3 N _ T S R F u 1
. 0 2 1 C D N 2 G 0 3 9 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 I 1 O P G _ L W I 2 O P G _ L W I 3 O P G _ L W I 4 O P G _ L W I 5 O P G _ L W I 6 O P G _ L W P M O C E S A H P N _ T S R _ O D L D 3 3 V _ C D C D D N G 31 32 33 34 35 36 37 38 39 40 F1 u 1
. 0 4 2 C 2 1.2VD 3.3VD 1.2VD PMU_OUT 1 3 C F u 1 XO XI 1 XTAL_V12A 3.3VD WL_GPIO0 VDD VCCIO AVDD12 ADC_VX_LDO XTAL_XO XTAL_XI XTAL_V12A PLL_VX_LDO BG_EXTR D N G D N G D N G D N G F u 1
. 0 8 2 C 1 1 2 F u 1
. 0 9 2 C 2 2 F 1 0 3 C u 1
. 0 D N 2G 1 2 2 3 C F u 1
. 0 D N G 1 2 GND 41 1 C I D N G O D L _ X V _ 0 F R I N _ 0 F R A 3 3 V _ 2 A P _ 0 F R A 3 3 V _ 1 A P _ 0 F R P T U O _ 0 F R N T U O _ 0 F R 8 R K 4 2 1 2 3 4 5 6 7 8 9 0 1 D V 3
. 3 1 F u 5 1 2 C 2 D N G 3 R R 0 D V 3
. 3 1 D V 3
. 3 N T U O _ A P _ 0 F R P T U O _ A P _ 0 F R 2 6 2 C F u 1 2 1 C 1 F u 1
. 0 F p 0
. 1 8 1 C D V 3
. 3 F u 1
. 0 7 C 1 2 D N G K 2
. 8 5 R 1 2 D N G F u 1
. 0 2 0 1 C 1 D N G P D U M D U 5 X 5
-
0 4 N F Q
-
1 0 6 7 T M 8 C 1 F u 1 2 D N G 3.3VD PMU_OUT 1.2VD VRES 3.3VD FB DCDC_V33A LDO_V15A VOUT_1P2 VRES VDDA PADM PADP VDD EEFL_CS 20 19 18 17 16 15 14 13 12 11 I O S M _ E E I S O M _ E E K L C _ E E I O C C V F u 2
. 2 6 C 1 2 D N G UDM UDP 5 C 1 F u 1 2 D N G D V 3
. 3 F u 1
. 0 2 4 1 C 1 D N G D V 2
. 1 D N G 2 P T U O _ A P _ 0 F R F1 p 0 1 7 1 C H n 7
. 2 4 V L
+
T 2 U O _ 0 A P 1 D N G 2 D V 3
. 3 D N G 1 N T U O _ A P _ 0 F R F1 p 0 1 9 1 C
-
T 2 U O _ 0 A P 1 1 2 C 1 F p 2
. 1 2 D N G D V 5 2 F p 6
. 5 1 4 C F p 6
. 5 2 4 C D N G 2 1 2 1 D N G 2 H1 n 8 1 7 V L 2 1
-
+ U U H n 8 1 8 V L D N G D V 5 F u 0 1 3 C D V 3
. 3 GND D N G D V 3
. 3 2 H u 7
. 4 1 V L 1 D V 5 3 2 1 N E D N G W S X L
/
N V I B F 1 Q 4 5 N E
-
r e w o P 8 2 7 5 G D N G GND D N G 4 C F u 1
. 0 F p 0 0 1 3 4 C 2 1 B F K 2 8 4 R K 8 1 3 R D N G V 3
. 3
=
) K 8 1
/
K 2 8
+
1
(
*
6
. 0
=
) 4 R
/
3 R
+
1
(
*
6
. 0
=
o V D V 5 D N G GND 1 1 C F u 1 0 2 C 1 F p 2
. 1 2 0 G _ T U O 7 2 F C R 1 2 5 V L H n 1 1 6 3 C 1 8 3 C 3 3 C F p 5
. 0 H n 7
. 2 3 V L 2 F p 0
. 1 D N 2 G F p 0
. 1 F p 0 1 D N 2 G 0 2 0 1 R 1 2 1 1 R 0 1 A N N E T N A H n 2
. 2 6 V L 2 1 D N G K 0 0 1 2 R 1 K 0 5 1 1 R 2 D N G 1 3 1 C 1 F u 1 2 D N G N E
-
r e w o P D V 5 345 12 1 Y page 10 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 2 : SMT connector page 11 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C Appendix 3 : Top & Bottom vertical view Connector view:
page 12 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. The module must be installed in TV set. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Regulation information
(1) This device and its antenna(s) must not be co-located or operating in conjunction with any other page 13 of 12 Version 2.1 PRODUCTS SPECIFICATION WF75RL1510C antenna or transmitter.
(2) This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm separation between antenna and body. The end product must carry a label stating Contains TX FCC ID: 2AC23-WF75RL1510C . page 14 of 12 Version 2.1
1 | Internal Photos | Internal Photos | 153.39 KiB | May 19 2016 |
Page 4 of 6 Report No.: ATL-FCC20160420 Internal Photos Photo 3 Appearance of PCB Photo 4 Appearance of PCB Version: ATL-FCCRF-15V01.00
1 | External Photos | External Photos | 172.81 KiB | May 19 2016 |
Page 3 of 6 Report No.: ATL-FCC20160420 APPENDIX EUT PHOTOS External Photos Photo 1 Appearance of EUT WIFI PIFA Antenna Photo 2 Appearance of FPC Antenna Version: ATL-FCCRF-15V01.00
1 | Label | ID Label/Location Info | 19.98 KiB | May 19 2016 |
Label GSD WIFI Module model: WF75RL1510C FCC ID: 2AC23-WF75RL1510C
1 | Label Location | ID Label/Location Info | 108.86 KiB | May 19 2016 |
Page 2 of 6 Report No.: ATL-FCC20160420 APPENDIX ID LABEL LOCATION ID Label Version: ATL-FCCRF-15V01.00
1 | Authorization Letter | Cover Letter(s) | 28.05 KiB | May 19 2016 |
Hui Zhou Gaoshengda Technology Co.,LTD FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 Hui Zhou Gaoshengda Technology Co.,LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Huizhou China Xupeng Shenzhen ATL Testing Technology Co., Ltd. F/4, Building 10, Dayuan Industrial Zone, Xili Town, Nanshan District, Shenzhen, China Shenzhen China We,
(the approval holder) Company name Address City Country declare that the following representative (agent):
Name (person) Company name Address City Country is hereby authorized to apply the following equipment for certification on our behalf:
Product Description Type or Model(s) Tradename or Brand(s) GSD We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation:
City and Country:
Huizhou, China Signature:
(or official company stamp) Name:
(this must be a person) Hui Guan WIFI Module WF75RL1510C 2016-04-25 Function:
Manager Date:
1 | Confidentiality Request | Cover Letter(s) | 31.06 KiB | May 19 2016 |
Hui Zhou Gaoshengda Technology Co.,LTD FCC Confidentiality Request Number: CF303 Version: V05 Date: 21-05-2012
(Permanent or also called long term confidentiality is the normal method to keep certain docuements confidential, and may apply to schematics, block diagrams, operational description and bill of materials.) To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we,
(the applicant / grantee) Company name Address City Country request for this certification filing under:
FCC ID:
to maintain permanent confidentiality for the following documents submitted within this application:
(please cross what is applicable, or add other documents, provide the file name and description) Exhibit V Operational Description V Block Diagrams V Schematics Diagrams Bill of Materials Hui Zhou Gaoshengda Technology Co.,LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Huizhou China Description explaining the functioning of the block diagram showing the systematic building blocks of the EUT showing components, their values and interconnection List of components used on the PCBs of the EUT File Name Product Number 2AC23 - WF75RL1510C Grantee Code Above materials crossed contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation:
City and Country:
Huizhou, China Signature:
(or official company stamp) Name:
(this must be a person) Hui Guan 2016-04-25 Function:
Manager Date:
1 | Data Sheet | Cover Letter(s) | 389.00 KiB | May 19 2016 |
MT7601U 802.11 b/g/n single chip Preliminary datasheet FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. This document contains information that is proprietary to MediaTek Inc. Specifications are subject to change without notice. 2010 - 2012 MediaTek Inc. Release date:
2012-12-10 Version:
0.06 loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 0.06 0.05 0.04 0.03 0.02 0.01 Date Author Ben Lin Ben Lin Alex Lin Alex Lin Alex Lin Alex Lin Revision 2012/9/27 2012/8/26 2012/12/10 2012/08/21 2012/08/13 2012/03/30 Description 1. Fix pin order 2. Update POD Document Revision History First formal release Update thermal information Update bootstrap infomation 1. Correct pin description typo 2. Correct strapping option typo 2. Update power consumption information 1. Change the thickness of the package to 0.8mm. FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL MediaTek Confidential 2012 MediaTek Inc. Page 2 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 2 1 Table of Contents Table of Contents ................................................................................................................................... 3 Document Revision History .................................................................................................................. 2 2.2 PIN Description ................................................................................................................... 7 2.1 Pin Layout ........................................................................................................................... 6 Product Descriptions ................................................................................................................... 6 1.4 Block Diagram .................................................................................................................... 5 1.3 Applications ........................................................................................................................ 5 1.2 Features ............................................................................................................................... 4 1.1 General Descriptions ......................................................................................................... 4 System Overview .......................................................................................................................... 4 FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL 2.3 Strapping option ................................................................................................................... 9 2.4 Package Information ........................................................................................................... 10 2.5 Ordering Information ........................................................................................................ 12 2.6 TOP Marking Information ................................................................................................. 12 Electrical characteristics ........................................................................................................... 13 3.1 Absolute maximum rating ................................................................................................... 13 3.2 Recommended operating range ......................................................................................... 13 3.3 DC characteristics .............................................................................................................. 13 3.4 Thermal characteristics ...................................................................................................... 13 3.5 Current consumption .......................................................................................................... 14 QFN Packaging ................................................................................................. 10 2.4.1 3 MediaTek Confidential 2012 MediaTek Inc. Page 3 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 1.2 1.1 circumstance. Features IEEE 802.11 b/g/n client Highly integrated RF with 55nm CMOS technology processing accelerators which offloads the host processor. 1 System Overview Embedded high-performance 32-bit RISC microprocessor complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity The MT7601U is a highly integrated Wi-Fi single chip which supports 150 Mbps PHY rate. It fully The MT7601U is designed to support standard based features in the areas of security, quality of Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data service and international regulations, giving end users the greatest performance any time and in any at high standards, and delivering reliable, cost-effective throughput from an extended distance. General Descriptions FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Integrate high efficiency switching regulator Security support for WFA WPA/WPA2 personal, WPS2.0, WAPI 1/2/3/4-wire PTA Wi-Fi / Bluetooth coexistence support Fully compliance with USB v2.0 High-speed mode 1T1R mode with support of 150Mbps PHY rate Best-in-class power consumption performance Supports 802.11w protected managed frames Compact 5mm x 5mm QFN40L package QoS support of WFA WMM, WMM PS Per packet transmit power control 802.11 d/h/k compliant Supports Wi-Fi Direct Antenna diversity Auto-calibration MediaTek Confidential 2012 MediaTek Inc. Page 4 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 1.4 1.3 Applications Block Diagram Desk-Top PC Note-book TV Blue-ray Disk Tablet PC Set-top box FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Figure 1 MT7601U block diagram MediaTek Confidential 2012 MediaTek Inc. Page 5 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application RFreceiverRFtransmitterBasebandMAC / Packet buffer / security engineUSBSystem controlRF_INRF_OUTPRF_OUTNUSBGPIO/LED MT7601U Preliminary datasheet Confidential A I I D D V X _ L A T X 2.1 O D L _ F R O D L _ F R O D L _ F R T S P D D V O D L _ L L P O X _ L A T X R T X E _ G B MT7601U RF_IN 2 2 Product Descriptions 25 GPIO6 26 GPIO5 27 GPIO4 28 GPIO3 29 GPIO2 30 GPIO1 VDDPST 7 RF_ LDO 1 RF_V33A 6 RF_V33A 3 EE_MOSI 9 EE_MISO 8 0 O P G RF_OUTP 4 RF_OUTN 5 Pin Layout 40 39 38 37 36 35 34 33 32 31 FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Figure 2 Top view of MT7601U QFN pin-out. 11 12 13 14 15 16 17 18 19 20 22 DCDC_V33D EE_CLK 10 23 PHASE LDO_RST_N A 3 3 V _ C D C D 21 COMP A D D V _ B S U 2 P 1 _ T U O V A 5 1 V _ O D L S C _ L F E E M D A P P D A P S E R V D D V 24 B F MediaTek Confidential 2012 MediaTek Inc. Page 6 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 2.2 8 9 10 11 USB interface 24 37 36 Reset and clocks QFN40 Pin Name 15 16 13 14 EEPROM/flash interface I/O PD N/A N/A N/A N/A N/A N/A N/A Input Input Input VRES PADP PADM EE_CLK VDDPST XTAL_XI EE_MOSI EE_MISO XTAL_XO USB_VDDA LDO_RST_N USB D- signal Crystal output USB D+ signal Supply domain Pin description USB BG reference Default PU/PD In/out USB_VDDA USB 3.3V power supply External system reset active low Crystal input or external clock input External memory data input / Antenna select External memory data output / Antenna select PIN Description In/out USB_VDDA FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Programmable input/output / Bluetooth coexistence Programmable input/output / Bluetooth coexistence Programmable input/output / Bluetooth coexistence Programmable input/output / Bluetooth coexistence Programmable input/output Programmable input/output Programmable input/output SMPS 3.3V power supply VDDPST RF auxiliary RX input External chip select Output VDDPST Output VDDPST Output VDDPST RF BG reference SMPS 1.5V input LDO 1.2V output External clock SMPS control LDO_V15A VOUT_1P2 BG_EXTR RF_OUTN RF_OUTP EEFL_CS VDDPST VDDPST VDDPST VDDPST VDDPST VDDPST RF port RF port Output GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 RF_IN Iutput In/out In/out In/out In/out In/out In/out In/out Input Input N/A N/A N/A N/A N/A N/A N/A N/A PD PU PU PD PD PD PD PD PD PD FB 31 30 29 28 27 26 WIFI radio interface 19,22 DCDC_V33 Programmable I/O PMU/SMPS 2 4 5 17 18 20 25 40 MediaTek Confidential 2012 MediaTek Inc. Page 7 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 7,33 21 23 12,32 VDD E-PAD DVSS Power supplies 3,6 1,35, 38,39 34 N/A N/A N/A N/A N/A N/A N/A N/A Input Input Input Input Input COMP PHASE VDDPST RF _LDO RF_V33A PLL_LDO SMPS control SMPS control Digital ground RF power supply RF power supply RF 3.3V power supply Digital I/O power supply Digital core power supply Table 1 Pin descriptions FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL MediaTek Confidential 2012 MediaTek Inc. Page 8 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 2.3 QFN40 8 27 25 10 9 PU PD PD PD PD GPIO6 GPIO4 EE_CLK EE_MOSI EE_MISO Pin Name Default PU/PD Pin description CHIP_MODE[0]: Pull up EXT_EE_SEL: Pull down CHIP_MODE[1]: Pull down CHIP_MODE[2]: Pull down Table 2 Strapping option Strapping option XTAL_20_SEL XTAL is 20MHz: Pull up XTAL is 40MHz: Pull down FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL MediaTek Confidential 2012 MediaTek Inc. Page 9 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 2.4 2.4.1 QFN Packaging Package Information FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL MediaTek Confidential 2012 MediaTek Inc. Page 10 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Figure 3 Package outline drawing MediaTek Confidential 2012 MediaTek Inc. Page 11 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 2.6 2.5 Part number MT7601UN/A-L Package
-10~70C 5x5x0.8 mm 40-QFN Operational temperature range Table 3 Ordering information Ordering Information TOP Marking Information FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Figure 4 Top marking MediaTek Confidential 2012 MediaTek Inc. Page 12 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MTKMT7601UNDDDD-####BBBBBBBMT7601UN : Part numberDDDD : Date code#### : Internal control codeBBBBBBB : Lot number MT7601U Preliminary datasheet Confidential A Unit 2000 3.2 3.1 Rating Parameters TSTG VESD Maximum rating V V V C V 3 Electrical characteristics Table 4 Absolute maximum ratings Symbol VDD33 VDD12 VDD15 Absolute maximum rating Symbol VDD33 VDD12 VDD15 TAMBIENT
-0.3 to 3.6
-0.3 to 1.5
-0.3 to 1.8
-40 to +125 Recommended operating range 3.3V Supply Voltage 1.2V Supply Voltage 1.5V Supply Voltage Storage Temperature ESD protection (HBM) FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL Maximum Junction Temperature (Plastic Package) Junction to ambient temperature thermal resistance[1][2]
Junction to case temperature thermal resistance 3.3V Supply Voltage 1.2V Supply Voltage 1.5V Supply Voltage Ambient Temperature
|IOL| = 1.6~14 mA
|IOH| = 1.6~14 mA PU=high, PD=low PU=low, PD=high Thermal characteristics Output Low Voltage Output High Voltage Input Low Voltage Input High Voltage Table 5 Recommended operating range DC characteristics Performance TYP Positive Going Threshold Voltage MIN 2.97 1.14 1.425 MAX 3.63 1.26 1.575 Schmitt Trigger Negative Going
-0.28 2.4 40 40 Input Pull-Down Resistance TYP 3.3 1.2 1.5 Input Pull-Up Resistance Table 6 DC description VOL VOH RPU RPD MIN
-0.28 2.0 MAX 0.6 3.63 V V K K Threshold Voltage TJ JA JC V V V C Schmitt Trigger VDD33+0.33 Description Conditions Parameter 190 190 VIL VIH Symbol Symbol 3.4 3.3 LVTTL LVTTL 48.11 C/W C/W TBD V V 1.36 0.68 1.36 Unit Unit Unit 125 VT+
-10 1.7 0.4 VT-
C 70 V V
-
MediaTek Confidential 2012 MediaTek Inc. Page 13 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application MT7601U Preliminary datasheet Confidential A 6 15 1.1 Note:
Jt mA mA mA mA mA 242 210 151 Unit TYP 3.23 C/W 3.5 RX Listen Sleep mode Description Performance
[3] 5mm x 5mm QFN40L package RX Active, HT40, MCS7 TX HT40, MCS7 @15dBm RX Power saving, DTIM=1
[2] PCB dimension 21mm x 11mm. 4-layer. TX CCK, 11Mbps @19dBm Table 7 Thermal information
[1] Air flow condition: Natural convection. 0.5m/s. Note: All result is measured at the antenna port and VDD33 is 3.3V Current consumption Table 8 WLAN 2.4GHz Current Consumption Junction to the package thermal resistance[3]
FOR yl.qiao@ sac.com.hk USE ONLY MEDIATEK CONFIDENTIAL MT7601 is ESD (electrostatic discharge) sensitive device and may be damaged with ESD or spike voltage. Although MT5931 is with built-in ESD protection circuitry, please handle with care to avoid the permanent malfunction or the performance degradation. ESD CAUTION mA MediaTek Confidential 2012 MediaTek Inc. Page 14 of 14 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. loginid=yl.qiao@sac.com.hk,time=2012-12-21 09:16:35,ip=183.37.247.78,doctitle=MT7601_Data_Sheet_v0_06.pdf,company=silicon application
1 | FCC Ad-Hoc Declaration | Cover Letter(s) | 28.37 KiB | May 19 2016 |
Hui Zhou Gaoshengda Technology Co.,LTD FCC Ad-Hoc Declaration Number: CF308 Version: V02 Date: 01-08-2011
(This form must be used and submitted for applications concerning equipment that may risk operating on non-U.S. frequencies that not allowed to use in the U.S., or equipment that may risk operating beyond the frequency channels for which it is certified.) To: Federal Communications Commission 7345 Oakland Mills Road Columbia MD 21046 Attention: Application Examiner / Review Engineer Subject: Ad Hoc Mode Function Declaration Hereby, we:
(the applicant company) Company Name Address:
Postal/Zip:
declare that this device identified by:
FCC ID:
is acting as slave and operating in the 2.4 GHz (2412 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies.
(Attestation)
(the applicant company or its authorized representative) City and Country:
Huizhou, China Hui Zhou Gaoshengda Technology Co.,LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Signature:
(or official company stamp) Name:
(this must be a person) Hui Guan Grantee Code (CG) Product Code 2AC23 - WF75RL1510C State/Province: Guangdong Country: China City: Huizhou 2016-04-25 Function:
Manager Date:
1 | Modular Approval Request | Cover Letter(s) | 159.15 KiB | May 19 2016 |
Hui Zhou Gaoshengda FCC Modular Approval Request Technology Co.,LTD Number:GF305 gy V0., Version: VO3 Date: 01-08-2011 To the FCC or FCC TCB handling this application Hereby we, Company name (grantee) Hui Zhou Gaoshengda Technology Co.,LTD Address NO.75 Zhongkai Development Area, Hulzhou, Guangdong, China City /ZIP / State / Country Huizhou, Guandong, China request modular approval for the certification of our equipment within this application, identified by:
Foc ID: 2AC23-WFTSRL1510C The table below contains the justification for modular approval of this equipment:
Requirement per DA 00-1407 Explanation from grantee (do not write yes/no, but explain why it complies / haw it is achieved) 1. The modular transmitter must have its own RF shielding, Yes
(The modular equip with own RF shielding case) 22. The modular transmitter must have buffered modulation/data inputs (if such inputs are | Yes provided) to ensure that the module will comply with Part 15 requirements under (The modular data inputs are buffered through log conditions of excessive data rates or over-modulation or microcontroler connections) 3. The modular transmitter must have its own power supply regulation. Yes
(RF voltage regulation is handled on the module) 44. The modular transmitter must comply with the antenna requirements of Section 15.203 Yes and 15.204(c). The antenna must either be permanently attached or employ a unique (The modular with permanently antenna, the antenna coupler (at all connections between the module and the antenna, including the _antennaiis FPC Antenna) cable). 5. The modular transmitter must be tested in a stand-alone configuration, je. the module | Yes must not be inside anther device during testing. This i intended to demonsirate thatthe (The modular during testing with @ USB adapter, module is capable of complying with Part 15 emission ims regardless ofthe device ino and the distance is greater than 10cm, so the which it is eventually installed. distance between modular and host system is greater than 10cm ) 66. The modular transmitter must be labeled with its own FCC ID number, and, fthe FCG Yes Dis not visible when the module is installed inside anther device, then the outside of (Please refer to FCC ID label) the device inlo which the module is installed must also display a label referring tothe enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID: XYZMODEL". Any similar wording that expresses the same meaning may be used. The Grantee may ether provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization, 7. The modular transmitter must comply with any specific rule or operating requirements Yes applicable to the transmitter and the manufacturer must provide adequate instructions (Please refer to the modular installation muanual) along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are vvery strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured.
'8. The modular transmitter must comply with any applicable RF exposure requirements. Yes For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, (Please see the MPE report, the modular meets including 15.319(), 15.407(f), 15.253() and 15.255(g), require that Unlicensed PCS, MPE calculation of 47 CFR 1.107 (b)(1).) UNII and milimeter wave devices perfomm routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15,247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Attestation (oy antes) City and Country: Date: Name: Function: Signature:
(this must be a person) (or oficial company stamp) Huizhou, China| '2016-04-25 | Hui Guan Manager dua quar
1 | RF Exposure Report | RF Exposure Info | 108.42 KiB | May 19 2016 |
Page 1 of 3 Report No.: ATL-FCC20160420 RF Exposure Report FCC ID: 2AC23-WF75RL1510C Product WIFI Module Trade Name GSD Model Number WF75RL1510C Issued for Hui Zhou Gaoshengda Technology Co.,LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Issued by Shenzhen ATL Testing Technology Co., Ltd. F/4, Building 10, Dayuan Industrial Zone, Xili Town, Nanshan District, Shenzhen, China Tel.: +86-0755-26909822 Fax.: +86-0755-61605504 Website: www.atllab.org Note: This report shall not be reproduced except in full, without the written approval of Shenzhen ATL Testing Technology Co., Ltd.. This document may be altered or revised by Shenzhen ATL Testing Technology Co., Ltd. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample Version: ATL-ICRF-15V01.00 Page 2 of 3 Report No.: ATL-FCC20160420 MPE Calculation 1. Antenna Gain:
WIFI PIFA Antenna: 2.412~2.462 GHz: 1.88 dBi 2. EUT Operation Condition:
Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation:
Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4R2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result:
MPE Result Mode NTX Frequency
(MHz) Power
(dBm)
[P]
ANT Gain
(dBi)
[G]
Distance
(cm)
[R]
1 2.4G WIFI Note:
(1) NTX= Number of Transmit Antennas
(2) RF Output power specifies that Maximum Conducted Peak Output Power. 19.55 2462 1.88 20 Power Density
(mW/cm2)
[S]
0.0276 5. Conclusion:
FCC and IC:
Environment) FCC: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), IC: As specified in 4.2 RF Field Strength Limits for Devices Used by the General Public (Uncontrolled Limits for General Population/ Uncontrolled Exposure Frequency Range
(MHz) 300-1,500 1,500-100,000 Power density
(mW/ cm2) F/1500 1.0 For all the operating frequency band the MPE limit S: 1 mW/ cm2 The maximum MPE is calculated as 0.0276mW / cm2 < limit 1 mW / cm2. So, RF exposure limit Version: ATL-ICRF-15V01.00 Page 3 of 3 Report No.: ATL-FCC20160420 warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. Version: ATL-ICRF-15V01.00
1 | Test Report | Test Report | 1.82 MiB | May 19 2016 |
Page 1 of 63 Report No.: ATL-FCC20160420 FCC Radio Test Report FCC ID: 2AC23-WF75RL1510C FCC 47 CFR Part 15 Subpart C RSS 247 Issue 1:2015 Product WIFI Module Trade Name GSD Model Number WF75RL1510C Firmware Version Identification Number (FVIN):
1.0 Issued for Hui Zhou Gaoshengda Technology Co.,LTD NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Issued by Shenzhen ATL Testing Technology Co., Ltd. F/4, Building 10, Dayuan Industrial Zone, Xili Town, Nanshan District, Shenzhen, China Tel.: +86-0755-26909822 Fax.: +86-0755-61605504 Website: www.atllab.org Note: This report shall not be reproduced except in full, without the written approval of Shenzhen ATL Testing Technology Co., Ltd.. This document may be altered or revised by Shenzhen ATL Testing Technology Co., Ltd. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample Version: ATL-ICRF-15V01.00 Page 2 of 63 Report No.: ATL-FCC20160420 TEST RESULT CERTIFICATION RSS 247 Issue 1: 2015 Product .................................. : WIFI Module Applicant ................................ : Hui Zhou Gaoshengda Technology Co.,LTD Address ................................. : NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Manufacturer.......................... : Hui Zhou Gaoshengda Technology Co.,LTD Address ................................. : NO.75 Zhongkai Development Area, Huizhou, Guangdong, China Model No. ............................. : WF75RL1510C Standards .............................. : FCC Part 15 Subpart C (15.247) Test Method ........................... : ANSI C63.10: 2014 The above equipment has been tested by Shenzhen ATL Testing Technology Co., Ltd. and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Test.......................................................... :
Date of receipt of test item ......................... 2016-04-11 Date(s) of performance of test ..................... 2016-04-11 to 2016-04-21 Test Result ............................................... : Pass KDB 558074 D01 DTS Meas Guidance v03r02 Testing by Check by Approved by
:
:
:
(Si feifei)
(Xie Lingling)
(Xu Peng) Date Date Date
:
:
:
2016-04-21 2016-04-22 2016-04-22 Version: ATL-ICRF-15V01.00 Page 3 of 63 Report No.: ATL-FCC20160420 Table of Contents Page 2 . GENERAL INFORMATION 3 . CONDUCTED EMISSION TEST 1 . TEST SUMMARY 1.1 TEST FACILITY 1.2 MEASUREMENT UNCERTAINTY 2.1 GENERAL DESCRIPTION OF EUT 2.2 DESCRIPTION OF TEST MODES 2.3 DESCRIPTION OF TEST SETUP 2.4 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL 2.5 EUT Exercise Software 5 6 6 7 7 9 10 11 11 12 3.1 CONDUCTED EMISSION MEASUREMENT (Frequency Range 150KHz-30MHz)12 12 3.2 TEST PROCEDURE 3.3 TEST SETUP 13 13 3.4 TEST INSTRUMENTS 13 3.5 EUT OPERATING CONDITIONS 3.6 TEST RESULTS 14 16 16 16 17 18 18 19 32 32 32 32 32 32 32 34 34 34 4.1 RADIATED EMISSION LIMIT (Frequency Range 9KHz-1000MHz) 4.2 TEST PROCEDURE 4.3 TEST SETUP 4.4 TEST INSTRUMENTS 4.5 EUT OPERATING CONDITIONS 4.6 TEST RESULTS 5.1 LIMITS 5.2 TEST PROCEDURE 5.3 TEST SETUP 5.4 TEST INSTRUMENTS 5.5 EUT OPERATING CONDITIONS 5.6 TEST RESULTS 6.1 LIMITS 6.2 TEST PROCEDURE 5 . MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT 6 . OCCUPIED BANDWIDTH MEASUREMENT 4 . RADIATED EMISSION MEASUREMENT Version: ATL-ICRF-15V01.00 Page 4 of 63 Report No.: ATL-FCC20160420 Table of Contents Page 6.3 TEST SETUP 6.4 TEST INSTRUMENTS 6.5 EUT OPERATING CONDITIONS 6.6 TEST RESULTS 7 . POWER SPECTRAL DENSITY 7.1 LIMITS 7.2 TEST PROCEDURE 7.3 TEST SETUP 7.4 TEST INSTRUMENTS 7.5 EUT OPERATING CONDITIONS 7.6 TEST RESULTS 8 . ANTENNA CONDUCTED SPURIOUS EMISSION 8.1 LIMITS 8.2 TEST PROCEDURE 8.3 TEST SETUP 8.4 TEST INSTRUMENTS 8.5 EUT OPERATING CONDITIONS 8.6 TEST RESULTS 9 . ANTENNA REQUIREMENT 9.1 REQUIREMENT 9.2 ANTENNA CONNECTOR CONSTRUCTION 34 34 34 34 43 43 43 43 43 43 43 52 52 52 52 52 52 52 63 63 63 Version: ATL-ICRF-15V01.00 Page 5 of 63 Report No.: ATL-FCC20160420 1. TEST SUMMARY Test procedures according to the technical standards:
FCC Part 15 Subpart C (15.247)/RSS 247 Issue 1: 2015 Test Item Judgment Remark AC Power Conducted Emission Antenna Conducted Spurious Emissions Output Power 6dB RF Bandwidth Power Spectral Density Transmitter Radiated Emissions
/
Antenna Requirement PASS PASS PASS PASS PASS PASS PASS Standard Section FCC IC 15.207 RSS Gen 15.247(d) 15.247(b)(3) 15.247(a)(2) 15.247(e) 15.209/
15.205 RSS 247 Section 5.5 RSS 247 Section 5.4(4) RSS 247 Section 5.2(1) RSS 247 Section 5.2(2) RSS 247 Section 5.5 RSS Gen 15.203 NOTE:
(1) N/A denotes test is not applicable in this Test Report
(2)The test results of this report relate only to the tested sample(s) identified in this report. Version: ATL-ICRF-15V01.00 Page 6 of 63 Report No.: ATL-FCC20160420 1.1 TEST FACILITY Shenzhen ATL Testing Technology Co., Ltd. Add. : F/4, Building 10, Dayuan Industrial Zone, Xili Town, Nanshan District, Shenzhen, China 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y Uwhere expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2providing a level of confidence of approximately 95 %. A. Conducted Emission :
The measurement uncertainty is evaluated as 3.2 dB. B. Radiated Measurement :
The measurement uncertainty is evaluated as 3.7 dB. Version: ATL-ICRF-15V01.00 Page 7 of 63 Report No.: ATL-FCC20160420 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Model Name Additional Model Number(s) Model Difference Frequency Range Modulation Type Data Rate RF Output Power Antenna Type Power Source Power Rating Remark WIFI Module WF75RL1510C N/A N/A 2412~2462 MHz 802.11b: DSSS (DBPSK/DQPSK/CCK) 802.11g: OFDM (BPSK/QPSK/16QAM/64QAM) 802.11n: OFDM (BPSK/QPSK/16QAM/64QAM) 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n: 150 Mbps 802.11b: 19.55 dBm 802.11g: 18.21 dBm 802.11n(HT20): 16.78 dBm 802.11n(HT40): 16.71 dBm PIFA Antenna (Max. Gain: 1.88 dBi) DC Powered by host system. DC 5V from USB interference. More details EUT technical specifications, please refer to the User's Manual. Note:
(1) This Test Report is FCC Part 15 Subpart C, 15.247 for IEEE 802.11b/g/n. And the Test procedure follows the FCC KDB 558074 D01 DTS Meas Guidance v03r02.
(2) Transmitting mode with antennas Mode 802.11b 802.11g 802.11n(HT20) 802.11n(HT40) TX Antenna (s) 1 1 1 1 Version: ATL-ICRF-15V01.00 Page 8 of 63 Report No.: ATL-FCC20160420
(3) Channel List. Frequency Band Channel No. 2400~2483.5MHz 1 2 3 4 5 6 For 802.11b/g/n(HT20), use channel 1~11 For 802.11n(HT40), use channel 3~9 2.4 GHz Band Frequency 2412 MHz 2417 MHz 2422 MHz 2427 MHz 2432 MHz 2437 MHz Channel No. Frequency 7 8 9 10 11 2442 MHz 2447 MHz 2452 MHz 2457 MHz 2462 MHz Version: ATL-ICRF-15V01.00 Page 9 of 63 Report No.: ATL-FCC20160420 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Final Test Mode Mode 2 Final Test Mode Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Description WiFi TX Mode WiFi TX 802.11b Mode WiFi TX 802.11g Mode WiFi TX 802.11n(HT20)Mode WiFi TX 802.11n(HT40) Mode For Conducted Test Description WiFi TX Mode For Radiated Test Description WiFi TX Mode WiFi TX 802.11b Mode WiFi TX 802.11g Mode WiFi TX 802.11n(HT20)Mode WiFi TX 802.11n(HT40) Mode Note:
(1) Software used to control the EUT for staying in continuous transmitting mode was programmed. After verification, all tests were carried out with the worst case test modes as shown below.
(2) IEEE 802.11b Mode:
Channel (2412/2437/2462 MHz) with 1Mbps data rate were chosen for full testing.
(3) IEEE 802.11g Mode:
(4) IEEE 802.11n(HT20) Mode:
(5) IEEE 802.11n(HT40) Mode:
Channel (2412/2437/2462 MHz) with 6 Mbps data rate were chosen for full testing. Channel (2412/2437/2462 MHz) with MCS 0 data rate were chosen for full testing. Channel (2422/2437/2452 MHz) with MCS 0 data rate were chosen for full testing.
(6) By preliminary testing and verifying three axis (X, Y and Z) position of EUT transmitted status, it was found that X axis position was the worst, then the final test was executed the worst condition and test data were recorded in this report. Version: ATL-ICRF-15V01.00 Page 10 of 63 Report No.: ATL-FCC20160420 2.3 DESCRIPTION OF TEST SETUP E-2 Notebook Radiated Emission 0.8m Table Cable 1 E-1 EUT 1.5m Version: ATL-ICRF-15V01.00 Page 11 of 63 Report No.: ATL-FCC20160420 2.4 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item E-1 E-2 Item 1 Note:
(1)
(2)
(3) Equipment WIFI Module Notebook Mfr/Brand GSD LENOVO Model/Type No. WF75RL1510C P405 Series No. N/A DOC Note EUT Shielded Type Ferrite Core NO NO Length 15cm Note The support equipment was authorized by Declaration of Confirmation. For detachable type I/O cable should be specified the length in cm inLengthcolumn. YES means shielded with core; NO means unshielded without core. 2.5 EUT Exercise Software Test Software Version MT7601QA.exe Power Parameters for Testing Mode 802.11b 802.11g 802.11n(HT20) 802.11n(HT40) 2412 MHz DEF 2412 MHz DEF 2412 MHz DEF 2422 MHz DEF Frequency/ Parameters 2437 MHz DEF 2437 MHz DEF 2437 MHz DEF 2437 MHz DEF 2462 MHz DEF 2462 MHz DEF 2462 MHz DEF 2452 MHz DEF Version: ATL-ICRF-15V01.00 Page 12 of 63 Report No.: ATL-FCC20160420 3. CONDUCTED EMISSION TEST 3.1 CONDUCTED EMISSION MEASUREMENT (Frequency Range 150KHz-30MHz) Quasi-peak dBuV 66 - 56 *
56.00 60.00 Average dBuV 56 - 46 *
46.00 50.00 FREQUENCY (MHz) 0.15 -0.5 0.50 -5.0 5.0 -30.0 Note:
(1) The tighter limit applies at the band edges.
(2) The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. The following table is the setting of the receiver Receiver Parameters Attenuation Start Frequency Stop Frequency IF Bandwidth Setting 10 dB 0.15 MHz 30 MHz 9 kHz 3.2 TEST PROCEDURE a. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d. LISN at least 80 cm from nearest part of EUT chassis. e. For the actual test configuration, please refer to the related Item EUT Test Photos. Version: ATL-ICRF-15V01.00 Page 13 of 63 Report No.: ATL-FCC20160420 3.3 TEST SETUP 3.4 TEST INSTRUMENTS Equipment Manufacturer LISN LISN R&S R&S 50 Switch ANRITSU CORP N/A Test Cable N/A Test Cable N/A Test Cable EMI Test Receiver Passive Voltage Probe ESH2-Z3 R&S Type No. Serial No. NSLK81 NSLK81 8126466 8126487 Last calibration Calibrated until Calibration Jul. 05, 2015 Jul. 04. 2016 Dec. 23, 2015 Dec. 22, 2016 period 1 year 1 year MP59B 6200983704 Jul. 05, 2015 Jul. 04. 2016 1 year C01 C02 C03 ESCI R&S N/A N/A N/A Jul. 05, 2015 Jul. 05, 2015 Jul. 05, 2015 Jul. 04. 2016 Jul. 04. 2016 Jul. 04. 2016 1 year 1 year 1 year 1166.595 Jul. 05, 2015 Jul. 04. 2016 1 year 100196 Jul. 05, 2015 Jul. 04. 2016 1 year 3.5 EUT OPERATING CONDITIONS The EUT tested system was configured as the statements of 2.3 Unless otherwise a special operating condition is specified in the follows during the testing. Version: ATL-ICRF-15V01.00 Page 14 of 63 Report No.: ATL-FCC20160420 3.6 TEST RESULTS WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage 120V/ 60Hz 1010hPa WIFI TX Mode (B 2412MHz) Model Name. WF75RL1510C Relative Humidity56%
Line Terminal:
Version: ATL-ICRF-15V01.00 Page 15 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage 120V/ 60Hz 1010hPa WIFI TX Mode (B 2412MHz) Model Name. WF75RL1510C Relative Humidity56%
Terminal:
Neutral Version: ATL-ICRF-15V01.00 Page 16 of 63 Report No.: ATL-FCC20160420 4. RADIATED EMISSION MEASUREMENT 4.1 RADIATED EMISSION LIMIT (Frequency Range 9KHz-1000MHz) 20 dBc in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within the restricted band specified on 15.205(a) and RSS-210 Section 2.2&A8.5, then the 15.209(a) and RSS-General limit in the table below has to be followed. FREQUENCY (MHz) 0.009 -0.490 0.490 -1.705 1.705 -30.0 30 -88 88 -216 216~960 Above 960 Field Strength
(uV/m at meter) 2400/F(KHz) 24000/F(KHz) 30 100 150 200 500 Measurement Distance
(meters) 300 30 30 3 3 3 3 RADIATED EMISSION LIMITS (Above 1000MHz) FREQUENCY (MHz) Above 1000 Note:
Class A (dBuV/m)(at 3 M) Average Peak 80 60 Class B (dBuV/m)(at 3 M) Peak 54 74
(1) The limit for radiated test was performed according to FCC PART 15C.
(2) The tighter limit applies at the band edges.
(2) Emission Level(dBuV/m)=20log Emission Level(uV/m) The following table is the setting of the receiver Receiver Parameter Attenuation Start Frequency~ Stop Frequency Start Frequency~ Stop Frequency Start Frequency~ Stop Frequency The following table is the setting of the spectrum Spectrum Parameter Attenuation Start Frequency Stop Frequency RB/ VB (emission in restricted band) Setting Auto 9kHz~150kHz/ RB 200Hz for QP 150kHz~30MHz/ RB 9kHz for QP 30MHz~1000MHz/ RB120kHz for QP Setting Auto 1000 MHz 10th carrier harmonic 1MHz/ 3 MHz for Peak, 1MHz/ 10Hz for Average 4.2 TEST PROCEDURE a. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz. For frequencies above 1GHz, any suitable measuring distance may be used. Version: ATL-ICRF-15V01.00 Page 17 of 63 Report No.: ATL-FCC20160420 b. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter open area test site for below 1 GHz emission test. The EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter open area test site for above 1 GHz emission test. The table was rotated 360 degrees to determine the position of the highest radiation. c. The height of the equipment or of the substitution antenna shall be 1.5 m; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured, above 1G Average detector mode will be instead. e. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. f. For the actual test configuration, please refer to the related Item EUT Test Photos. Note:
Both horizontal and vertical antenna polarities were tested. And performed pretest to three orthogonal axis. The worst case emissions were reported. 4.3 TEST SETUP
(A) Radiated Emission Test Set-Up Frequency Below 1 GHz Version: ATL-ICRF-15V01.00 Page 18 of 63 Report No.: ATL-FCC20160420
(B) Radiated Emission Test Set-Up Frequency Above 1GHz R&S 4.4 TEST INSTRUMENTS Equipment Manufacturer Broadband Antenna Test Cable Test Cable EMI Test Receiver Antenna N/A N/A R&S EM Mast EM Turn Table 50 Switch Anritsu Corp Spectrum Analyzer R&S Horn Antenna Amplifier R&S EM Type No. VULB 9168 Serial No. VULB 9168-456 period 1 year Last calibration Calibrated until Calibration Jul. 05, 2015 Jul. 04. 2016 R-01 R-02 ESCI SC100_1 SC100 MP59B FSP40 HF906 N/A N/A Dec. 23, 2015 Dec. 22, 2016 Dec. 23, 2015 Dec. 22, 2016 1 year 1 year 101324 Jul. 05, 2015 Jul. 04. 2016 1 year N/A 060531 N/A N/A N/A N/A 6200983705 Jul. 05, 2015 Jul. 04. 2016 N/A N/A 1 year 100154 Jul. 05, 2015 Jul. 04. 2016 1 year 10029 Jul. 05, 2015 Jul. 04. 2016 1 year EM-30180 060538 Jul. 05, 2015 Jul. 04. 2016 1 year 4.5 EUT OPERATING CONDITIONS The EUT tested system was configured as the statements of 2.3 Unless otherwise a special operating condition is specified in the follows during the testing. Version: ATL-ICRF-15V01.00 Page 19 of 63 Report No.: ATL-FCC20160420 4.6 TEST RESULTS 4.6.1 TEST RESULTS (Bellow 1GHz) WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2412MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2412MHz) Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 20 of 63 Report No.: ATL-FCC20160420 Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical 4.6.2 TEST RESULTS (Above 1GHz) WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2412MHz) Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2412MHz) Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 21 of 63 Report No.: ATL-FCC20160420 Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2437MHz) Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2437MHz) Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 22 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2462MHz) Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (B 2462MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 23 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (G 2412MHz) Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (G 2412MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 24 of 63 Report No.: ATL-FCC20160420 Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (G 2437MHz) Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (G 2437MHz) Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 25 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (G 2462MHz) Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (G 2462MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 26 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N20 2412MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N20 2412MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 27 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N20 2437MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N20 2437MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 28 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N20 2462MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N20 2462MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 29 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N40 2422MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N40 2422MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 30 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N40 2437MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N40 2437MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 31 of 63 Report No.: ATL-FCC20160420 WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N40 2452MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Horizontal Remark:
Factor = Antenna Factor + Cable Loss. WIFI Module EUT Temperature 26 Pressure Test Mode Test Voltage DC 5V 1010hPa WIFI TX Mode (N40 2452MHz) Model Name. WF75RL1510C Relative Humidity56%
Ant. Pol.:
Vertical Remark:
Factor = Antenna Factor + Cable Loss. Version: ATL-ICRF-15V01.00 Page 32 of 63 Report No.: ATL-FCC20160420 5. MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT 5.1 LIMITS FCC Part 15.247, subpart C/ RSS 247 Section 5.4(4) Frequency Range (MHz) Limits 2400~2483.5 30 5.2 TEST PROCEDURE The measurement is according to section 9.1.2 of FCC KDB 558074 D01 DTS Meas Guidance v03r02. The EUT was directly connected to the power meter and antenna output port as show in the block diagram as bellow. 5.3 TEST SETUP 5.4 TEST INSTRUMENTS Equipment Manufacturer P-Series Power Meter Agilent Wideband Power Sensor Type No. Serial No. Last calibration Calibrated until Calibration period N1911A MY45100482 Jul. 05, 2015 Jul. 04. 2016 1 year Agilent N1921A MY51200145 Jul. 05, 2015 Jul. 04. 2016 1 year 5.5 EUT OPERATING CONDITIONS The EUT was set to continuously transmitting in the maximum power during the test. 5.6 TEST RESULTS Version: ATL-ICRF-15V01.00 Page 33 of 63 Report No.: ATL-FCC20160420 2.4 G Band Conducted Power 802.11b Power Conducted Power (dBm) Ant. 0 Ant. 1 19.40 19.46 19.55 802.11g Power Conducted Power (dBm) Ant. 0 Ant. 1 18.15 18.21 18.11 802.11n(HT20) Power Conducted Power (dBm) Ant. 0 Ant. 1 16.78 16.74 16.70 802.11n(HT40) Power Conducted Power (dBm) Ant. 0 Ant. 1 16.66 16.71 16.65 Total 19.40 19.46 19.55 Total 18.15 18.21 18.11 Total 16.78 16.74 16.70 Total 16.66 16.71 16.65 Channel Frequency 1 6 11 2412 MHz 2437 MHz 2462 MHz Channel Frequency 1 6 11 2412 MHz 2437 MHz 2462 MHz Channel Frequency 1 6 11 2412 MHz 2437 MHz 2462 MHz Channel Frequency 1 6 11 2412 MHz 2422 MHz 2452 MHz Max. Limit
(dBm) 30 Max. Limit
(dBm) 30 Max. Limit
(dBm) 30 Max. Limit
(dBm) 30 Version: ATL-ICRF-15V01.00 Page 34 of 63 Report No.: ATL-FCC20160420 6. OCCUPIED BANDWIDTH MEASUREMENT 6.1 LIMITS FCC Part 15.247, subpart C/ RSS 247 Section 5.2(1) Frequency Range (MHz) Limits 2400~2483.5 6 dB Bandwidth>500 KHz 6.2 TEST PROCEDURE The EUT was directly connected to the power meter and antenna output port as show in the block diagram as bellow. Spectrum Parameters Attenuation Span RBW VBW Detector Trace Sweep Time 6.3 TEST SETUP Setting Auto
>6 dB Bandwidth 100 kHz 3RBW Peak Max Hold Auto 6.4 TEST INSTRUMENTS Equipment Manufacturer Spectrum Analyzer R&S Type No. Serial No. Last calibration Calibrated until Calibration FSP40 100154 Jul. 05, 2015 Jul. 06. 2016 period 1 year 6.5 EUT OPERATING CONDITIONS The EUT was set to continuously transmitting in the maximum power during the test. 6.6 TEST RESULTS Version: ATL-ICRF-15V01.00 Page 35 of 63 Report No.: ATL-FCC20160420 801.11b Mode Frequency
(MHz) 2412 2437 2462 6dB Bandwidth
(MHz) 10.1198 10.1299 10.1000 99% OBW
(MHz) 12.32 12.36 12.40 Limit
>=500 kHz B Mode 2412 MHz Version: ATL-ICRF-15V01.00 Page 36 of 63 Report No.: ATL-FCC20160420 B Mode 2437 MHz B Mode 2462 MHz Version: ATL-ICRF-15V01.00 Page 37 of 63 Report No.: ATL-FCC20160420 801.11g Mode Frequency
(MHz) 2412 2437 2462 6dB Bandwidth
(MHz) 16.5997 16.5899 16.5997 99% OBW
(MHz) 16.48 16.48 16.48 Limit
>=500 kHz G Mode 2412 MHz Version: ATL-ICRF-15V01.00 Page 38 of 63 Report No.: ATL-FCC20160420 G Mode 2437 MHz G Mode 2462 MHz Version: ATL-ICRF-15V01.00 Page 39 of 63 Report No.: ATL-FCC20160420 801.11n(HT20) Mode Frequency
(MHz) 2412 2437 2462 6dB Bandwidth
(MHz) 17.8300 17.8799 17.8196 99% OBW
(MHz) 17.72 17.72 17.72 Limit
>=500 kHz N Mode 2412 MHz Version: ATL-ICRF-15V01.00 Page 40 of 63 Report No.: ATL-FCC20160420 N Mode 2437 MHz N Mode 2462 MHz Version: ATL-ICRF-15V01.00 Page 41 of 63 Report No.: ATL-FCC20160420 801.11n(HT40) Mode Frequency
(MHz) 2422 2437 2452 6dB Bandwidth
(MHz) 36.4399 36.4892 36.4892 99% OBW
(MHz) 35.92 35.92 35.92 Limit
>=500 kHz N Mode 2422 MHz Version: ATL-ICRF-15V01.00 Page 42 of 63 Report No.: ATL-FCC20160420 N Mode 2437 MHz N Mode 2452 MHz Version: ATL-ICRF-15V01.00 Page 43 of 63 Report No.: ATL-FCC20160420 7. POWER SPECTRAL DENSITY 7.1 LIMITS FCC Part 15.247, Subpart C/ RSS 247 Section 5.2(2) Frequency Range (MHz) 99% Occupied Bandwidth 2400~2483.5 8 dBm in any 3 kHz 7.2 TEST PROCEDURE The EUT was directly connected to the power meter and antenna output port as show in the block diagram as bellow. Spectrum Parameters Attenuation Span RBW VBW Detector Trace Sweep Time 7.3 TEST SETUP 7.4 TEST INSTRUMENTS Equipment Manufacturer Spectrum Analyzer R&S Setting Auto Set the span to 1.5 times the DTS channel bandwidth 3 kHz 3RBW Reak Max Hold Auto Type No. Serial No. Last calibration Calibrated until Calibration FSP40 100154 Jul. 05, 2015 Jul. 04. 2016 period 1 year 7.5 EUT OPERATING CONDITIONS The EUT was set to continuously transmitting in the maximum power during the test. 7.6 TEST RESULTS Version: ATL-ICRF-15V01.00 Page 44 of 63 Report No.: ATL-FCC20160420 801.11b Mode Power Density (3 kHz/dBm) ANT 0 ANT 1
-15.10
-14.01
-13.07 Total
-15.10
-14.01
-13.07 Limit
(dBm/3KHz) Result 8 Pass Frequency
(MHz) 2412 2437 2462 B Mode 2412 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 45 of 63 Report No.: ATL-FCC20160420 B Mode 2437 MHz-ANT 1 B Mode 2462 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 46 of 63 Report No.: ATL-FCC20160420 801.11g Mode Power Density (3 kHz/dBm) ANT 0 ANT 1
-14.14
-14.05
-14.33 Total
-14.14
-14.05
-14.33 Limit
(dBm/3KHz) Result 8 Pass Frequency
(MHz) 2412 2437 2462 G Mode 2412 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 47 of 63 Report No.: ATL-FCC20160420 G Mode 2437 MHz-ANT 1 G Mode 2462 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 48 of 63 Report No.: ATL-FCC20160420 Frequency
(MHz) 2412 2437 2462 801.11n(HT20) Mode Power Density (3 kHz/dBm) ANT 0 ANT 1
-13.43
-14.16
-14.68 Total
-13.43
-14.16
-14.68 Limit
(dBm/3KHz) Result 8 Pass N (HT20) Mode 2412 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 49 of 63 Report No.: ATL-FCC20160420 N (HT20) 2437 MHz-ANT 1 N (HT20) 2462 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 50 of 63 Report No.: ATL-FCC20160420 Frequency
(MHz) 2422 2437 2452 801.11n(HT40) Mode Power Density (3 kHz/dBm) ANT 0 ANT 1
-15.99
-15.67
-15.81 Total
-15.99
-15.67
-15.81 Limit
(dBm/3KHz) Result 8 Pass N (HT40) Mode 2422 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 51 of 63 Report No.: ATL-FCC20160420 N (HT40) 2437 MHz-ANT 1 N (HT40) 2452 MHz-ANT 1 Version: ATL-ICRF-15V01.00 Page 52 of 63 Report No.: ATL-FCC20160420 8. ANTENNA CONDUCTED SPURIOUS EMISSION 8.1 LIMITS FCC Part 15.247, Subpart C/ RSS 247 Section 5.5 Frequency Range
(MHz) Limit 2400~2483.5 In any 100 kHz bandwidth outside the intentional radiation frequency band, the radio frequency power shall be at least 20 dB below the highest level of the desired power, based on either an RF conducted measurement, provide the transmitter demonstrates compliance with the peak conducted power limits. 8.2 TEST PROCEDURE The EUT was directly connected to the power meter and antenna output port as show in the block diagram as bellow. a. Set frequency range to capture low band-edge from 2310 MHz up to 2390 MHz, and for up band-edge from 2483.5 MHz up to 2500 MHz b. For low band-edge set the equipment transmit at the lowest channel, and for up band-edge set the equipment transmit at the highest channel c. Set the VBW3 RBW (100kHz/ 300kHz) for conducted measurement d. For radiated measurements the RBW set to 1 MHz, and the VBW set to 1 MHz for peak measurements and 10 Hz for average measurement 8.3 TEST SETUP Conducted Emission Test Setup 8.4 TEST INSTRUMENTS Equipment Manufacturer Spectrum Analyzer R&S Type No. Serial No. Last calibration Calibrated until Calibration FSP40 100154 Jul. 05, 2015 Jul. 04. 2016 period 1 year 8.5 EUT OPERATING CONDITIONS The EUT was set to continuously transmitting in the maximum power during the test. 8.6 TEST RESULTS Only showed the worst mode data of ANT 0 transmitting. Version: ATL-ICRF-15V01.00 Page 53 of 63 Report No.: ATL-FCC20160420 B Mode Low CH B Mode High CH Version: ATL-ICRF-15V01.00 Page 54 of 63 Report No.: ATL-FCC20160420 G Mode Low CH G Mode High CH Version: ATL-ICRF-15V01.00 Page 55 of 63 Report No.: ATL-FCC20160420 N(20) Mode Low CH N(20) Mode High CH Version: ATL-ICRF-15V01.00 Page 56 of 63 Report No.: ATL-FCC20160420 N(40) Mode Low CH N(40) Mode High CH Version: ATL-ICRF-15V01.00 Page 57 of 63 Report No.: ATL-FCC20160420 B Mode Low CH (30MHz~26.5GHz) B Mode Mid CH (30MHz~26.5GHz) Version: ATL-ICRF-15V01.00 Page 58 of 63 Report No.: ATL-FCC20160420 B Mode High CH (30MHz~26.5GHz) G Mode Low CH (30MHz~26.5GHz) Version: ATL-ICRF-15V01.00 Page 59 of 63 Report No.: ATL-FCC20160420 G Mode Middle CH (30MHz~26.5GHz) G Mode High CH (30MHz~26.5GHz) Version: ATL-ICRF-15V01.00 Page 60 of 63 Report No.: ATL-FCC20160420 N(20) Mode Low CH (30MHz~26.5GHz) N(20) Mode Mid CH (30MHz~26.5GHz) Version: ATL-ICRF-15V01.00 Page 61 of 63 Report No.: ATL-FCC20160420 N(20) Mode High CH (30MHz~26.5GHz) N(40) Mode Low CH (30MHz~26.5GHz) Version: ATL-ICRF-15V01.00 Page 62 of 63 Report No.: ATL-FCC20160420 N(40) Mode Mid CH (30MHz~26.5GHz) N(40) Mode High CH (30MHz~26.5GHz) Version: ATL-ICRF-15V01.00 Page 63 of 63 Report No.: ATL-FCC20160420 9. ANTENNA REQUIREMENT 9.1 REQUIREMENT An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. If transmitting antennas of directional gain greater than 6 dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. Antenna Requirement
(15.203) Antenna Requirement
(15.247) 9.2 ANTENNA CONNECTOR CONSTRUCTION The EUT antenna is a PIFA Antenna. And the maximum gain of this antenna is 1.88 dBi. It complies with the standard requirement. Version: ATL-ICRF-15V01.00
1 | Test Setup Photos | Test Setup Photos | 146.28 KiB | May 19 2016 |
Page 5 of 6 Report No.: ATL-FCC20160420 APPENDIX TEST PHOTOS Conducted Emission Test Setup Version: ATL-FCCRF-15V01.00 Page 6 of 6 Report No.: ATL-FCC20160420 Radiated Emission Test Setup (15C Test) Version: ATL-FCCRF-15V01.00
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-05-19 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-05-19
|
||||
1 | Applicant's complete, legal business name |
Hui Zhou Gaoshengda Technology Co.,LTD
|
||||
1 | FCC Registration Number (FRN) |
0023889280
|
||||
1 | Physical Address |
NO.75 Zhongkai Development Area
|
||||
1 |
Huizhou, Guangdong
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AC23
|
||||
1 | Equipment Product Code |
WF75RL1510C
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H****** G****
|
||||
1 | Telephone Number |
+86-0********
|
||||
1 | Fax Number |
+86-0********
|
||||
1 |
g******@gaosd.cn
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Teleconformity
|
||||
1 | Name |
M******** K****
|
||||
1 | Physical Address |
Rietven 31
|
||||
1 |
Enschede, Overyssel, 7534NH
|
|||||
1 |
Netherlands
|
|||||
1 | Telephone Number |
08483********
|
||||
1 |
m******@teleconformity.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Modular Approval. Power Output listed is Conducted. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20/40 MHz bandwidths. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen ATL Testing Technology Co., Ltd.
|
||||
1 | Name |
S**** W********
|
||||
1 | Telephone Number |
086-0********
|
||||
1 | Fax Number |
086-0********
|
||||
1 |
a******@163.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2412.00000000 | 2462.00000000 | 0.0901000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC