Fingerprint ID Mouse MS3500 Fingerprint ID Scanner MS2600 User's Manual Hunno Technologies Inc. FingerprintIDMouse/Scanner MS3500/2600 Copyright (c) 1999-2002 Hunno Technologies Inc. All rights reserved. The copyright of this document belongs to Hunno Technologies Inc. No part of this document may be copied or reproduced by any means. MagicSecure is a registered trademark of Hunno Technologies Inc. Microsoft Windows 2000 Professional is a registered trademark of Microsoft Corporation. Microsoft Windows XP Home Edition is a registered trademark of Microsoft Corporation. Microsoft Windows XP Professional Edition is a registered trademark of Microsoft Corporation. All other product names mentioned in this document are the registered trademarks of the corresponding companies and are protected by the patent and copyright laws. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. 12F. Sewon Venture Town, 705-18, Yoksam-Dong, Kangnam-Ku, Seoul, 135-080, South Korea Website : http://www.hunno.com/
E-mail: support@hunno.com
- 2 -
Hunno Technologies Inc. FingerprintIDMouse/Scanner MS3500/MS2600 Getting Started MagicSecure MS3500/MS2600 eliminates the need for user passwords with something can't be stolen or forgotten, tighten network security, simplifies the log-on process, and reduces the costs associated with managing corporate networks. MS3500/MS2600, which can be used on almost any surface without a mouse pad, guarantees fast recognition speed and accuracy. Strong durability of optical sensor shall be efficient for user's Cost Saving Policy. Unpacking MS3500 : USB Fingerprint ID Mouse MS3500 USB Mouse MagicSecure Program CD Software User Guide MS2600 : USB Fingerprint ID Scanner MS2600 USB Scanner MagicSecure Program CD Software User Guide Features
Windows 98/ME/2000/XP/NT Logon
USB Support
Weel & Optical Mouse Function, Scroll Function, Zoom Function
Folder & File Encryption
Screensaver
4 Type Security Code (Fingerprint, Password, Fingerprint and/or Password)
Boot Protection
Log Data Management
Windows XP-Style Icon Hunno Technologies Inc.
- 3 -
FingerprintIDMouse/Scanner MS3500/2600 Specifications
Verification Time : 1.0 sec
FRR : 0.01%
FAR : 0.001%
Size of Template : 256 byte
Resolution : 500 dpi
Communication : USB
Power : DC 5V (Bus Power) System requirements
Windows 98/ME, Windows 2000
Pentium 133Mhz or above, 32MB RAM, 20MB HDD
USB Port MagicSecure MS3500/MS2600 Part Names Fingerprint Sensor USB Interface USB Interface Fingerprint Sensor Optical Sensor Hardware Installation 1. 2. Connecting the MS3500/MS2600. Turn on the power of PC1. Connect the MS2600 (Fingerprint Identification Device for PC Security) to the USB port of the PC Installing Device Drivers. 3.
- 4 -
Hunno Technologies Inc.
FingerprintIDMouse/Scanner MS3500/MS2600 Software Installation There are three device drivers that should be installed when MS3500(device name) is operated on Windows 98 : USB composite device, MS3500(driver name), and USB human interface device. Install MS3500 only when MS3500 is operated on Windows 2000/Window XP. There is one device driver that should be installed when MS2600 is operated on Windows 98/ Windows 2000/ Windows XP : MS2600 For Windows 98 1. USB composite device (MS3500) At the Add New Hardware Wizard screen shown above, click Next. At the screen shown above, select Search for the best driver for your device (Recommended), and then click Next. At the screen shown above, select Specify a location, and then click Next. Hunno Technologies Inc.
- 5 -
FingerprintIDMouse/Scanner MS3500/2600 At the screen shown above, clicking Next will start the installation When the driver installation is complete and the screen indicating that Windows has finished installing USB composite device appears, click Finish. 2. MS3500/MS2600 At the Add New Hardware Wizard screen shown above, click Next. At the screen shown above, select Search for the best driver for your device (Recommended), and then click Next.
- 6 -
Hunno Technologies Inc. FingerprintIDMouse/Scanner MS3500/MS2600 At the screen shown above, insert the MagicSecure CD and select CD ROM drive, and then click Next. Note: If the path to the CD ROM drive is not found 1) Ensure that the CD has been inserted. 2) After verifying the CD is inserted, click Back to return to the screen where the drive is specified. 3) Select Specify a location, and then click Browse.... 4) At Folder Browse, specify the CD-ROM drive and click OK. At the screen shown above, clicking Next will start the installation. Hunno Technologies Inc.
- 7 -
FingerprintIDMouse/Scanner MS3500/2600 When the driver installation is complete and the screen indicating that Windows has finished installing MS3500/MS2600 appears, click Finish. 3. USB human interface device (MS3500) At the Add New Hardware Wizard screen shown above, click Next. At the screen shown above, select Search for the best driver for your device (Recommended), and then click Next. At the screen shown above, select Specify a location, and then click Next.
- 8 -
Hunno Technologies Inc. FingerprintIDMouse/Scanner MS3500/MS2600 At the screen shown above, clicking Next will start the installation. When the driver installation is complete and the screen indicating that Windows has finished installing USB human interface device appears, click Finish. For Windows ME At the Add New Hardware Wizard screen shown above select Specify the location of the driver
(Advanced), and then click Next. At the screen shown above, insert the MagicSecure CD and select Removable media (Floppy, CD-ROM...), and then click Next. At the screen shown above, clicking Next will start the installation. Hunno Technologies Inc.
- 9 -
FingerprintIDMouse/Scanner MS3500/2600 When the driver installation is complete and the screen indicating that Windows has finished installing MagicSecure3500 appears, click Finish. For Windows 2000 (MS3500/MS2600) At the Found New Hardware Wizard screen shown above, click Next. At the screen shown above, select Search for a suitable driver for my device (Recommended), and then click Next. At the screen shown above, insert the MagicSecure CD and select CD-ROM drive from Optional search locations, and then click Next.
- 10 -
Hunno Technologies Inc. FingerprintIDMouse/Scanner MS3500/MS2600 At the screen shown above, clicking Next will start the installation. When the driver installation is complete, and the Completing the Found New Hardware Wizard screen for MS3500/MS2600 appears, click Finish. For Windows XP (MS3500/MS2600) At the Welcome to the Found New Hardware Wizard screen, select Install from a list or specific location (Advanced), and then click Next. Insert the MagicSecure CD and select Search removable media (Floppy, CD-ROM...), and then click Next. Hunno Technologies Inc.
- 11 -
FingerprintIDMouse/Scanner MS3500/2600 When the driver installation is complete and the Completing the Fond New Hardware Wizard screen for MS3500/MS2600 appears, click Finish.
- 12 -
Hunno Technologies Inc.