Part number : MAN-553-0003-A or e-mail cservice@HWM-Water.com Technical Support on 01633 489479 If further support or assistance is required, please contact HWM Do not expose the USB Transceiver to moisture.
(vertical polarization) and should be kept clear of obstructions, particularly metallic surfaces. For maximum transmission range the antenna of the transmitter should point upward 3. INSTALLATION 3. LEDs will illuminate. 2. Insert USB into computer. 1. 2. SETUP INSTRUCTIONS Attach antenna. HWM reserves the right to change any product specification without prior notice. to your main product guide for more details. The USB Transceiver is a setup and configuration tool for various HWM devices. Please refer 1. INTRODUCTION This guide covers only the most basic operations including connections and commissioning. USB TRANSCEIVER QUICK START GUIDE HWM Water Ltd Ty Coch House Llantarnam Park Way Cwmbran NP44 3AW UK DDI:+44 (0)1633 627842 Tel: +44 (0)1633 489479 USB Transceiver Quick Start Guide This guide covers only the most basic operations. For other features and more details, see www.hwmglobal.com 4. OPERATION Power Receiving from antenna Ready Transmitting from antenna Antenna USB Communicating with PCin / out Power LED indicates device is plugged in to the PC and is on. Ready shows that the device is not currently performing an action, so is available to start receiving or transmitting. Receiving and Transmitting LEDs show the device is communicating with the target device. The Communicating LEDs indicate that the device is communicating with the PC;
Red = data in to the PC, Green = data from the PC. WARNINGS:
FCC warning statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. SIMPLIFIED DECLARATION OF CONFORMITY This simplified EU declaration of conformity referred to in article 10(9) shall be provided as follows:
Hereby, HWM Ltd declares that the radio equipment type transceiver is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.hwmglobal.com Warranty All equipment is warranted by HWM-Water Ltd to be free from defect in materials and workmanship under normal use for a period of one year from the data shipped to the original customer. This warranty in only valid if the equip-
ment:
1. is properly installed and operated under conditions of normal use in accordance with HWMs published instructions set out in the manual;
is operated in compliance with federal, state, county and local codes and, is operated in accordance with standard industry practices. 2. 3. 4. As the exclusive remedy for any breach of warranty, HWM will repair or replace (at HWMs option) the non-
conforming equipment. HWM shall have no liability for incidental, special, punitive or consequential damages arising from any defect in, or malfunction of, the equipment to any party. This warranty does not cover any costs incurred for the removal or installation of equipment. If any problems occur, you should notify HWM or its authorised representative, giving full details of the problem, the model and serial numbers of the equipment and the HWM invoice number the equipment was shipped against. You will receive technical advise and / or shipping instructions depending on the nature of the problem. If the problem cannot be resolved you will be issued with an RMA number and a return address label so that the products can be shipped back to HWM for inspection. Once we have reviewed and confirmed that the product is in warranty, we will contact you to confirm what action we will be taking to resolve the issue. All warranty and service activity must be undertaken by an authorised representative of HWM. The express warranty is in-lieu of all other representations or warranties, express, implied or statutory and spe-
cifically excludes and warranty of merchantability or fitness for a particular purpose. There are no warranties that extend beyond the description on the face hereof. No parties or affiliates can make any warranty, promises or representations either written or oral to the quality of products other than what is set out herein.