all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 4.52 MiB | November 01 2011 | |||
1 | Cover Letter(s) | November 01 2011 | ||||||
1 | Cover Letter(s) | November 01 2011 | ||||||
1 | External Photos | November 01 2011 | ||||||
1 | Cover Letter(s) | November 01 2011 | ||||||
1 | ID Label/Location Info | November 01 2011 | ||||||
1 | Internal Photos | November 01 2011 | ||||||
1 | RF Exposure Info | November 01 2011 | ||||||
1 | Test Report | November 01 2011 | ||||||
1 | Test Setup Photos | November 01 2011 |
1 | Users Manual | Users Manual | 4.52 MiB | November 01 2011 |
Preface Thank you for purchasing this Audio Navigation System. iPod iPod is a registered trademark of Apple, Inc. This user manual explains how to use the KIA Motor Audio Navigation System. Before using the product, read the contents of this user's manual carefully and use the product safely. The screens shown in this manual may differ with the actual screens of the product. The design and specification of this product may change without prior notification for product improvement. When transferring the vehicle to another individual, include this user's manual so that the next driver can continue its use. Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. A Bluetooth enabled cell phone is required to use Bluetooth wireless technology. All Map Database cannot be copied without permission. This is protected by U.S. copyright laws. All rights not expressly granted are reserved. You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent. Tables of contents PART 1 PRE-OVERVIEW PART 2 AUDIO SYSTEM PART 3 NAVIGATION SYSTEM Introduction 1-2 Important information about this manual 1-2 Precaution for safe usage 1-2 Controller and functions 1-3 Control panel 1-3 Steering wheel remote controller 1-6 Basic operation and setting 1-7 Turning the power ON 1-7 Turning the power OFF 1-7 Turning the audio ON/OFF 1-7 Adjusting audio volume 1-7 How to operate the screen menu 1-8 How to operate menu by voice command 1-10 Audio sound setting 1-11 Display setting 1-12 Setting Picture Frame 1-13 Viewing Current Time 1-14 Setting the Clock 1-14 Operating the radio 2-2 FM/AM Radio 2-2 SIRIUS Radio 2-6 Operating the CDP 2-11 About CDP 2-11 Inserting/Ejecting Disc 2-14 CD 2-15 MP3 2-18 Operating the external devices 2-23 iPod 2-23 USB 2-28 AUX 2-31 Limitations of the navigation system 3-2 GPS signal reception state 3-2 Vehicle position display 3-3 Route guidance 3-4 Route Re-calculation 3-4 Starting navigation system 3-5 Map Functions 3-5 Current position map screen
(without route) 3-5 Switching map mode
(North up/Heading up) 3-6 Viewing GPS signal state 3-7 Changing the map scale 3-8 Displaying / Hiding POI icons on the map 3-9 Displaying / Hiding Q.POI icons 3-9 Displaying /Hiding icons other than Q.POI icons 3-9 Making a call to POI 3-10 Scrolling map 3-11 Tables of contents Setting a Destination 3-12 Destination menu screen and functions
3-12 Searching a Destination 3-13 Searching an Address 3-13 Searching a Previous Destination 3-17 Searching an Intersection 3-17 Searching a POI 3-20 Searching from Address book 3-24 Searching for Emergency facilities
3-25 Searching your Home 3-25 Searching favorite places 3-26 Searching from MAP 3-26 Searching POI by local POI list 3-26 Operating after searching a destination 3-27 Changing destination position 3-27 Setting as Destination/waypoint 3-27 Adding to address book 3-27 Operating after setting a destination 3-28 Starting Route Guidance 3-28 Route guidance screen 3-28 Selecting other route 3-29 Route guidance 3-30 Route menu screen and functions 3-30 Finishing route guidance
(Delete Destination) 3-30 Route overview(View Entire Route)
3-31 Changing Route option 3-32 Editing waypoints 3-32 Adding waypoints 3-32 Deleting waypoints 3-34 Re-ordering waypoints 3-34 Setting detour distance 3-35 Setting avoid streets on route 3-35 Setup and Information 3-36 Setup menu screen and functions 3-36 Main setting 3-36 Setting keyboard for inputting letter 3-36 Setting voice command feedback ON/OFF 3-37 Setting Language 3-37 Initializing system 3-37 Navigation setting 3-38 Setting units (mile/km) 3-38 Setting arrival time and distance display 3-38 Registering avoid area 3-38 Editing avoid area 3-40 Deleting avoid area 3-41 Deleting all avoid areas 3-41 Setting Q.POI icons 3-42 Setting estimate travel time 3-42 My places setting 3-43 Registering new address in address book 3-43 Editing an address of address book 3-45 Deleting an address of address book 3-46 Deleting an address book 3-47 Registering home address 3-48 Deleting home address 3-48 Registering favorite place 3-49 Deleting favorite place 3-50 Voice guidance volume setting 3-51 Voice guidance volume control 3-51 Adaptive volume control ON/OFF 3-52 Traffic Setup 3-52 Traffic Information 3-52 Help 3-54 PART 4 VOICE COMMAND SYSTEM Operating voice command 4-2 Condition for voice command system
4-2 Basic operation for voice command control 4-2 Voice command help 4-3 Setting up the voice command sys-
tem 4-4 Setting voice Prompt ON/OFF 4-4 Speaker adaptation 4-4 Voice command list 4-6 Command list of Help 4-6 Command list of Audio system 4-7 Command list of Phone 4-13 Command list of Navigation system
4-14 Searching a destination by voice command 4-19 PART 5 BLUETOOTH HANDSFREE Before using the Bluetooth Handsfree 5-2 What is Bluetooth ? 5-2 Functions supported by Bluetooth Handsfree 5-2 Converting Bluetooth Handsfree mode 5-2 Converting from Audio/Navigation mode to Bluetooth Handsfree mode 5-2 Converting from Bluetooth Handsfree mode to Audio/Navigation mode 5-3 Pairing and connecting a Bluetooth phone 5-4 Pairing a mobile phone 5-4 Deleting a paired phone 5-6 Connecting a mobile phone 5-7 Disconnecting a mobile phone 5-8 Bluetooth Handsfree screen layout 5-9 Bluetooth Handsfree screen and functions 5-9 When there is no mobile phone connected 5-9 When a mobile phone is connected 5-9 When receiving an incoming call 5-10 When already on a call 5-10 When there is a call waiting 5-10 Making a call 5-11 Making a call by dialing a phone number 5-11 Making a call from Speed Dial 5-11 Making a call by redialing 5-12 Answering a call 5-13 Answering an incoming call 5-13 Rejecting an incoming 5-13 Operating menus during a call 5-14 Switching call to the mobile phone 5-14 Activating Call waiting 5-14 Ending a call 5-15 Tables of contents Phone Book 5-16 Making a call from the Phone book 5-16 Searching the Phone Book 5-17 Searching by name 5-17 Searching by number 5-18 Call History List 5-19 Making a call from Call history 5-19 Sorting call history 5-19 Phone Music 5-21 Before playing Phone Music 5-21 Starting Phone Music 5-21 Phone Music screen layout 5-22 Selecting Phone Music files 5-23 Bluetooth settings 5-24 Pairing and connecting a mobile phone 5-24 Setting mobile phone auto connect priority 5-24 Setting Handsfree volume 5-25 Setting Audio streaming 5-26 Advanced settings 5-26 Searching and modifying my device properties 5-27 Changing passkey 5-28 Deleting all paired phones 5-28 Initializing Bluetooth handsfree 5-29 Important information 5-30 About pairing mobile phones 5-30 About making/answering phone calls
5-31 About Bluetooth device environment
5-31 PART 6 APPENDIX Troubleshooting guide 6-2 Before thinking the product has malfunctioned 6-2 Troubleshooting 6-3 Map legend 6-5 Road color 6-5 Landmark icons 6-8 POI icons 6-5 INDEX 6-8 PART 1 PRE-OVERVIEW PART 1 PRE-OVERVIEW Introduction 1-2 Important information about this manual 1-2 Precaution for safe usage 1-2 Controller and functions 1-3 Control panel 1-3 Steering wheel remote controller 1-6 Basic operation and setting 1-7 Turning the power ON 1-7 Turning the power OFF 1-7 Turning the audio ON/OFF 1-7 Adjusting audio volume 1-8 How to operate the screen menu 1-8 Operating typical screen menu 1-8 Inputting letters by using screen keyboard 1-8 Displaying the list 1-9 Selecting an item in a list 1-9 Sorting items from the list 1-9 How to operate a menu by P R E
O V E R V E W I voice command 1-10 Condition for voice recognition system 1-10 Giving voice command 1-10 Audio sound setting 1-11 FAD/BAL 1-11 BASS/MID/TREB 1-11 Auto volume control ON/OFF 1-11 Touch screen beep ON/OFF 1-11 Display setting 1-12 Display mode 1-12 Brightness 1-12 Display OFF 1-12 Display ON 1-12 Setting Picture Frame 1-13 Display Picture Frame 1-13 Viewing Current Time 1-14 Setting the Clock 1-14 PRE-OVERVIEW 1-1 PART 1 PRE-OVERVIEW Introduction Precaution for safe usage Important information about this manual WARNING !
Do not operate the Audio/Video Navigation system while driving. This user manual contains instructions related to safety. Closely observe and comply with all of the safety instructions found within this manual. Do not disassemble, assemble, or modify the Audio/Video Navigation system. Do not watch the screen for prolonged periods of time while driving. When cleaning the touch screen, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, ammo-
nia, benzene, thinners, etc.) as such mate-
rials may damage the device panel or cause color and quality deterioration. Page de rfrence WARNING !
Disobeying the warnings listed within this user's manual may cause fatal or serious injuries. Warnings indicate matters which may directly lead to accidents. CAUTION!
Disobeying the cautions listed within this user manual may lead to accidents or cause injury. Cautions indicate matters which may lead to vehicle damage or malfunction. INFORMATION Information which the user must be aware or allows for more convenient use of the device. 1-2 PRE-OVERVIEW Set the volume to a level which allows the driver to be aware of external conditions. This indicates the title and page that you should refer to. This indicates a button on the control panel. Voice Command This indicates an operation by voice com-
mand. CAUTION!
Do not operate the Audio/Video Navigation system for prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge. Be cautious not to spill water or introduce foreign objects into the device. Do not cause severe shock to the device. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch panel. In case of product malfunction, please contact your place of purchase or service center. Controller and functions Control panel
Power / Volume control Push knob (over 0.8 second) : Turns the power off. Push knob (under 0.8 second) : Each time the knob is pressed, the Audio is turned on and off. Tune knob : The range of volume adjust-
ment is between 0 ~ 35. P R E
O V E R V E W I
FM/AM Each press will change the bands in the fol-
lowing order: FM1 FM2 AM FM1
SAT Each press will change the bands in the fol-
lowing order : SIRIUS1 SIRIUS2 SIRIUS3 SIRIUS1
MEDIA Each press will change the bands in the fol-
lowing order : DISC(CD, MP3) (USB or iPod)
(AUX) DISC(CD, MP3) PRE-OVERVIEW 1-3 PART 1 PRE-OVERVIEW
SEEK/TRACK Up/Down SHORT KEY(less than 0.8 second) FM/AM Mode : Automatically searches for the previous or next broadcast frequency and starts playing. SAT Mode : Receives the previous or next channel. CD Mode : Plays the previous or next track. MP3, USB Mode : Plays the previous or next file. iPod Mode : Plays the previous or next song. LONG KEY(over 0.8 second) FM/AM Mode : Quickly moves through the frequencies while the button is pressed. Once released, automatically searches for broadcasts which can be received. SAT Mode : Quickly moves to the previous or next channel. CD Mode : REW/FF the current playing track. MP3, USB Mode : REW/FF the current playing file. iPod Mode : REW/FF the current playing song. 1-4 PRE-OVERVIEW
TUNE FM/AM Mode : Turn the knob to search for the desired frequency. Press the knob to receive the selected frequency. SAT Mode : Turn the knob to search for the desired channel. Press the knob to receive the selected channel. CD Mode : Turn the knob to search for the desired track. Press the knob to play the selected track. MP3, USB Mode : Turn the knob to search for the desired file. Press the knob to play the selected file. iPod Mode : Turn the knob to search for the desired song. Press the knob to play the selected song.
DEST Displays the Destination menu screen.
ROUTE Displays the Route menu screen.
SETUP Displays the Setup menu screen.
PHONE button Displays the Bluetooth handsfree screen.
DISC Eject button Eject the inserted disc.
Clock Short Key (under 0.8 second)
MAP VOICE Displays the map screen for the current posi-
tion. When the screen is turned on : displays the current time in the center of the screen. When the screen is turned off : turns the full clock screen on and off. Long Key (over 0.8 second) Displays the clock setting screen.
RESET Resets the system - if software locks-up.
DISC insert indicator LED Displays that a DISC has been inserted. INFORMATION If pressing the power off knob for over 0.8 second and the system does not shut down, and carefully use insert a straightened paper clip at the access hole shown next to the right DISC indicator LED to reset the software. The system power will shut-off and restart. P R E
O V E R V E W I PRE-OVERVIEW 1-5 PART 1 PRE-OVERVIEW Steering wheel remote controller Press this button when the Power is turned iPod Mode : REW/FF the current playing song. off to turn the power on.
Seek Up/ Down SHORT KEY(less than 0.8 second)
Mode Each time the mode button is pressed, the mode will convert in the following order:
FM1 FM2 AM SIRIUS1 SIRIUS2 SIRIUS3 (DISC) (USB or iPod) (AUX)
(Phone Music) (FM1). If a not supported DISC has been inserted or if the corresponding unit has not been connected, the mode will not be recognized and automatically switch to the next mode. Press this button for over 0.8 second to turn FM/AM : Receives the previous or next pre-
set frequency. SIRIUS Mode : Receives the previous or next preset channel. CD Mode : Plays the previous or next track. MP3, USB Mode : Plays the previous or next file. iPod Mode : Plays the previous or next song. LONG KEY(Over 0.8 second) FM/AM Mode : Quickly moves through the frequencies while the button is pressed. Once released, it automatically searches for broadcasts which can be received. SIRIUS Mode : Quickly moves to the pre-
vious or next channel. CD Mode : REW/FF the current playing track. the Audio ON and OFF. MP3, USB Mode : REW/FF the current playing file. 1-6 PRE-OVERVIEW
Volume Up/Down Increases or decreases the speaker volume within a range between 0 ~ 35.
MUTE Turns the sound on and off. When the MUTE is turned on, the MUTE icon will become dis-
played. When in the Navigation screen, the MUTE icon at the top of the screen will disap-
pear after 3seconds.
CALL Press this key to receive an incoming call. If pressed while in AV/Navigation mode, the Bluetooth handsfree screen will be displayed.
END Press this key to reject an incoming call. If pressed while on a call, then the call will be ended.
Voice Recognition button Starts Voice Recognition. Basic operation and setting Turning the power ON 1. Turn the ignition key onto ACC or ON. If the system power had been on when the igni-
tion was turned off, the system will turn back on automatically. 2. If the system power had been off when the ignition was turned off, the system will remain off. In this case, press the knob to turn on the system power. INFORMATION As system booting starts from the point the door lock is unlocked, the device may com-
plete booting before the ACC is turned on or the knob is pressed. 3. Once system booting is complete, the most recent operated mode will be displayed. For example, turning on the system will display FM1 radio mode if the last operated mode prior to turning off the system had been FM1 radio mode. Turning the power OFF If the knob is pressed for over 0.8 second, a beep will sound and the system power will be turned off. Turning the audio ON/OFF Press the knob for under 0.8 second with the system power on to turn the Audio on and off. P R E
O V E R V E W I Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Audio On"
"Audio Off"
PRE-OVERVIEW 1-7 PART 1 PRE-OVERVIEW INFORMATION How to operate the screen menu Conducting the following operations while the AUDIO is off will automatically turn on the Audio system. Pressing the audio related buttons ( ,
, ). Inserting a DISC or connecting an external device. Adjusting audio volume Turn the knob in clockwise direc-
tion to increase the volume and counter-
clockwise to decrease the volume. INFORMATION The range of volume adjustment is between 0 ~ 35. Adjustments to the volume cannot be made while the AUDIO is turned off. If a menu button on the screen is pressed, the corresponding function will be opera-
ted. The same menu button may perform diffe-
rent functions depending on the length of time the button is pressed (under 0.8 seconds or over 0.8 second). For more information, refer to the specific function within this user manual. The current operated button will be highlighted upon display. Buttons which cannot be operated under the current conditions will be displayed in disabled state. Pressing a disabled button will not perform any operation. Inputting letters by using screen keyboard
: Displays the English alphabet keypad.
: Displays the French alphabet keypad. (if available)
: Displays the number and symbol key-
pad.
: Deletes the previous inputted letter. Pressing for over 0.8 second will delete all content.
: The input is completed.
: Restores to previous screen. The inputted text will not be saved. 1-8 PRE-OVERVIEW Displaying the list
Selecting an item in a list
Sorting items from the list P R E
O V E R V E W I
: Even if input is not completed, the current matching items from the data-
base will be displayed. INFORMATION The number at the upper-right side of the screen displays the number of current matches.
: Moves to the next page or previous page.
: The
button will be displayed if the text is too long to be displayed in one button. Press the button to move the cursor to the end of the text. Press the
button to move the cursor to the front of the text. Select the desired sorting method to reorga-
nize the list in accordance to the selected method. PRE-OVERVIEW 1-9 PART 1 PRE-OVERVIEW How to operate menu by voice command Condition for voice recognition system Most of the functions within the AUDIO and Navigation system can be operated by voice. Please follow the instructions below for optimal voice recognition performance. Giving voice command INFORMATION Press the
key shortly to input the desired voice command. The system voice instruction comment will immediately terminate. When the icon with a beep sound, it is possible to input voice commands. icon changes into the
Close all windows and sunroof.
1. Press the
key on the steering wheel The performance of the voice recognition can be improved in quiet environment. Press the voice recognition button and say the desired voice command after the sound of the beep. The microphone is positioned above the driver so that voice commands can be said while maintaining a proper posture. Pronounce the voice commands natu-
rally and clearly as if in normal conver-
sation. remote controller. A voice command window will be dis-
played on the lower side of the screen fol-
lowed by a "Command please" voice com-
ment. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the desired voice com-
mand.
[Voice command list], page 4-6.
[ Searching a destination by voice command], page 4-20. 1-10 PRE-OVERVIEW Audio sound setting Press the button on the main screen of each AV mode (FM/AM, SIRIUS, CD, MP3, USB, iPod, and AUX) to display the Audio sound setup screen. FAD/BAL The position of the sound can be adjusted by using the up-down and left-right (
) buttons on the left side of the screen. button to position the Press the sound in the center of the vehicle.
BASS/MID/TREB The BASS/MID/TREB can be adjusted by using the left/right buttons (
) of each control.
PART 1 PRE-OVERVIEW Display setting Press the key on the control panel to display the Setup menu screen. Auto volume control ON/OFF Each time the button is pressed, the Auto volume control function is turned on or off. INFORMATION The Auto volume control is a function which automatically adjusts the volume level in accordance to changes in vehicle speed. Touch screen Beep ON/OFF Each time the button is pressed, the beeping sound that follows each press on the screen will turn on or off. P R E
O V E R V E W I PRE-OVERVIEW 1-11 Display mode Press the button for the desired display mode from , modes. The current selected mode is highligh-
ted.
, and
Brightness Use the left/right buttons (
control to make adjustments. Display OFF Press the button.
) for
The display is automatically converted between Daylight and Night modes in accor-
dance to the on/off state of the vehicle taillights. Display ON Press anywhere on the black screen. The screen prior to display setting will be dis-
played. Press button to display the Display Setup screen.
The bright screen is always maintained regardless of the on/off state of the vehicle taillights.
The dark screen is always maintained regardless of the on/off state of the vehicle taillights. 1-12 PRE-OVERVIEW 4. To delete an image registered as a frame, press the button. Setting Picture Frame Display Picture Frame 1. Press the button in the DISPLAY Setup screen. 2. Press the button in the <Setting Display off> Setup screen. P R E
O V E R V E W I 3. The registered image will be displayed once power is turned off. INFORMATION For Picture Frame setup, the frame must be set in USB Image mode. (For details on setting the Picture Frame, refer to the USB IMAGE page.) PRE-OVERVIEW 1-13 PART 1 PRE-OVERVIEW Viewing Current Time Press the on the front panel shortly
(under 0.8 second) to display the current time at the center of the screen. Setting the Clock Press and hold the on the front panel
(over 0.8 second) to display the Clock setting screen. Daylight Saving Time Turns the Daylight Saving Time function on or off. INFORMATION Clock setting mode can be displayed while the clock is displayed on the screen even when the system is turned off. INFORMATION If the screen is turned off, selecting the will display the current time on the entire screen. GPS Time The time received from the GPS will be dis-
played automatically. Clock Type Selects the clock type shown as the entire screen when the system power is turned off. Time Format When the clock type is digital, this button is used to convert the time between 12 hour/ 24 hour systems. 1-14 PRE-OVERVIEW P R E
O V E R V E W I PRE-OVERVIEW 1-15 PART 2 AUDIO SYSTEM PART 2 AUDIO SYSTEM Operating the radio 2-2 FM/AM Radio 2-2 Listening to the FM/AM radio 2-2 FM/AM screen and functions 2-2 Selecting FM/AM broadcast frequency 2-4 Storing FM/AM presets 2-5 Scanning FM/AM broadcast frequency 2-5 SIRIUS Radio 2-6 Listening to the SIRIUS radio 2-6 SIRIUS screen and functions 2-6 Switching the SIRIUS modes
(Channel/Category) 2-7 Selecting SIRIUS broadcast channel 2-7 Storing SIRIUS presets 2-9 Scanning SIRIUS broadcast channel
2-10 Browsing detailed information about the SIRIUS channel 2-10 Operating the CDP 2-11 About CDP 2-11 Precautions upon handling discs 2-11 For safe and efficient operation 2-11 Supported disc formats 2-12 Disc/Content format compatibility 2-13 Inserting/Ejecting disc 2-14 CD 2-15 Listening to CD music 2-15 CD screen and functions 2-15 Selecting the CD track 2-16 REW/FF CD track 2-16 Setting Random function for CD music 2-16 Setting Repeat function for CD music 2-17 Scanning CD track 2-17 MP3 2-18 MP3 disc related information and precaution 2-18 Listening to MP3 music 2-19 MP3 screen and functions 2-19 Selecting the MP3 file 2-20 REW/FF MP3 file 2-21 Browsing detailed information about the MP3 file 2-21 Setting Random function for MP3 file 2-21 Setting Repeat function for MP3 file 2-22 Scanning MP3 file 2-22 I A U D O S Y S T E M Starting USB IMAGE Mode 2-31 Starting USB IMAGE Mode 2-31 USB IMAGE mode menu screen configuration 2-31 Operating USB IMAGE Mode 2-32 AUX 2-31 Connecting AUX 2-31 Playing AUX 2-31 AUX screen 2-32 PART 2 AUDIO SYSTEM Operating the external devices 2-23 iPod 2-23 Connecting iPod devices 2-23 Listening to music from iPod 2-23 iPod screen and functions 2-24 Selecting music from iPod 2-25 REW/FF iPod music 2-26 Setting Random function for iPod music 2-26 Setting Repeat function for iPod music 2-27 Browsing detailed information about the iPod music 2-27 USB 2-28 USB MP3 related information and precaution 2-28 Precautions upon handling USB
2-28 Connecting the USB devices 2-30 Listening to USB music 2-30 AUDIO SYSTEM 2-1 PART 2 AUDIO SYSTEM Operating the radio FM/AM Radio Listening to the FM/AM radio 1. Press the key on the control panel. The FM/AM radio band of the most recent listened station will be displayed. 2. Press the key to change the desired radio band. Each press will change the bands in the following order: FM1 FM2 AM FM1 3. Select the desired broadcast frequency.
[Selecting FM/AM broadcast frequency], page 2-5. 2-2 AUDIO SYSTEM Voice Command FM/AM screen and functions 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
" Radio"
"(Radio) AM"
"(Radio) FM"
"FM <1 or 2>"
"AM Frequency <530 to 1710>"
"FM Frequency <87.5 to 107.9>"
"AM Preset <1 to 6>"
"FM <1 or 2> Preset <1 to 6>"
G F D E J H K
L
I
Mode display : Displays the FM1/FM2/ AM modes.
SEEK/SCAN/PRESET SCAN : If SEEK/SCAN /
PRESET SCAN is operating, the switch is displayed.
Frequency : Displays the current playing frequency. O p e r a t i n g t h e r a d o i D button : Changes the desired radio band. Each press will change the bands in the following order: FM1 FM2 FM1 I Preset buttons : The desired frequency can be preset and selected.
[Storing FM/AM presets], page 2-5. J button : Turns the Radio Text E F SHORT KEY(less than 0.8 second) TUNE Up/Down button The frequency is increased or decreased by 1-step increments (FM : 0.2MHz, AM :
10kHz). LONG KEY(over 0.8 second) The frequency is rapidly increased or decreased by 1-step increments (FM :
0.2MHz, AM : 10kHz) and stops operation upon KEY RELEASE. G H SHORT KEY(less than 0.8 second) SEEK Up/Down button information on and off. INFORMATION If the is on OFF state, text will not be displayed even if there is text being transmit-
ted from the broadcast station. If the is on ON state, the frequency bar will not be displayed. Even if the is on ON state, text may not be displayed if text is not being received from the broadcast station. Automatically searches for the previous or next broadcast frequency and starts playing. LONG KEY(over 0.8 second) Quickly moves through the frequencies while the button is pressed. Once released, it automatically searches for broadcasts which can be received. K button : Scans all frequencies or just the preset frequencies for 5 seconds each.
[Scanning FM/AM broadcast frequency], L page 2-5.
button : Adjusts the FAD/BAL, BASS/MID/TREB controls.
[Audio sound setting], page 1-11. AUDIO SYSTEM 2-3 PRESET SCAN (over 0.8 second): Scans the 6 frequencies stored as preset frequencies in the current band for 5 seconds each. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Preset Scan"
INFORMATION When scanning has completed an entire revo-
lution, the scan function will be terminated automatically and the previous played frequen-
cy will be restored. 2. Press the
button again to continue listening to a frequency. The scan will be terminated and the current frequency will continue to be played.
STEREO indicator : If the current frequency is a stereo broadcast, the indicator is dis-
played.
Program Service name: Displays the pro-
gram service name if data is being broad-
casted.
Program Type name: Displays the program type name if data is being broadcasted.
Frequency bar : Displays the position of the current frequency within the total fre-
quency range.
Radio Text: Displays the radio text informa-
tion if data is being broadcasted. PART 2 AUDIO SYSTEM Storing FM/AM presets 1. Select the desired frequency.
[Selecting FM/AM broadcast frequency], page 2-4. 2. Press the preset button to store for over 0.8 second. The frequency will become stored along with a beep sound. INFORMATION Six preset frequencies each for FM1/FM2/AM modes can be stored using the above instruc-
tions.
Scanning FM/AM broadcast frequency 1. Press the SCAN (less than 0.8 second) : Scans all fre-
quencies and plays only frequencies with superior reception for 5 seconds each. button. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Scan"
2-4 AUDIO SYSTEM O p e r a t i n g t h e r a d o i Selecting FM/AM broadcast frequency There are 3 ways to select the broadcast frequency - (a) selecting through presets,
(b) selecting through SEEK, (c) selecting through manual search.
(a) Selecting a frequency through presets Press the preset button of the desired broadcast frequency. INFORMATION Press the or keys for a short time on the steering wheel remote controller. The preset frequencies of the current band will be selected in order. There are 6 different preset frequencies each for FM1, FM2, and AM modes.
[Storing FM/AM preset], page 2-5. PART 2 AUDIO SYSTEM SIRIUS radio Listening to the SIRIUS radio
1. Press the key on the control panel. The Sirius radio band screen of the most recent listened station will be displayed. 2. Press the key to change the desired radio band. Each press will change the bands in the following order: SIRIUS1 SIRIUS2 SIRIUS3 SIRIUS1 3. Select the desired broadcast channel.
[Selecting SIRIUS broadcast channel], page 2-7. 2-6 AUDIO SYSTEM Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Preset <1 to 6>"
"Preset Up"
"Preset Down"
the button is released, the next frequency with superior reception will be searched automatically.
or While the SEEK function is operating, pressing the
keys on the control panel again will terminate SEEK operation and select the current frequency.
(b) Selecting a Broadcast frequency through Voice Command SEEK
or Press the
keys on the control panel or the or buttons on FM1, FM2, and AM mode screens for less than 0.8 second. Once the SEEK function is opera-
ting (SEEK indicator blinking), the next or pre-
vious broadcast frequency with superior reception will be searched automatically. INFORMATION Press the
or
keys on the control panel or the or keys on the steering wheel remote controller or the or buttons on FM1, FM2, and AM mode screens for more than 0.8 second to quickly move to the nearest desired frequency. Once 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Seek Up"
"Seek Down"
(c) Selecting a broadcast frequency through manual search or Press the buttons or turn the
k n o b o n t h e co n t ro l p a n e l i n clockwise or counter-clockwise direction. Each click on the tune knob or the or buttons will increase or decrease the fre-
quency by 1 step (FM: 0.2 MHz, AM: 10 kHz). AUDIO SYSTEM 2-5 Voice Command SIRIUS screen and functions 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"SIRIUS"
"SIRIUS <1 or 2 or 3>"
"SIRIUS Channel <0 to 223>"
"SIRIUS <1 or 2 or 3> Preset <1 to 6>"
E D F
K H G J
I
M N
L
Mode display: Displays the SIRIUS1/
SIRIUS2/SIRIUS 3 modes.
Channel number: Displays the current playing channel.
SCAN/PRESET SCAN indicator: If SCAN/
PRESET SCAN is operating, the switch is displayed.
Category name: Displays the category name.
Channel name: Displays the channel name.
Song/Program title: Display the song or program title.
Artist name: Displays the artist or other related information. INFORMATION The Song title display may be delayed in accordance to the reception quality of the Sirius broadcast. D button : Switches between chan-
nel mode and category mode.
[Switching the SIRIUS modes], page 2-7. L M button: Displays the channel or
category list.
[Selecting SIRIUS broadcast channel], page 2-7.
button: Scans all frequencies or just the preset frequencies for 5 seconds each.
[Scanning SIRIUS broadcast chan-
nel], page 2-10. O p e r a t i n g t h e r a d o i through channel/category list, (e) selecting by directly inputting the channel number.
(a) Selecting a channel through presets Press the preset button of the desired chan-
nel. INFORMATION Press the or keys on the steering wheel remote controller for less than 0.8 second. The preset channels of the current band will be selected in order. There are 6 preset channels each for SIRIUS1, SIRIUS2, and SIRIUS3.
[Storing SIRIUS presets], page 2-9. AUDIO SYSTEM 2-7 N button : Adjusts the FAD/BAL,
[Audio sound BASS/MID/TREB controls. setting], page 1-11.
Switching the SIRIUS modes (Channel /
Category) Each time the button is pressed, the mode will switch between channel mode and category mode. Category mode will begin operating when the orange light is turned ON. Selecting SIRIUS broadcast channel There are 5 ways to select a broadcast channel
- (a) selecting through presets, (b) selecting with channel Up/Down, (c) Selecting a chan-
nel through manual search, (d) selecting E F
: Moves to the next or pre-
vious category, and automatically plays the first channel within the selected category.
: Moves to the next or previous G H
, channel.
can be preset and selected. I buttons : The desired channel J
[Storing SIRIUS presets], page 2-9.
button : Displays the Title, Artist, Composer, and other information for the current received channel if the informa-
tion exists. K button: Selects the channel by directly inputting the channel number.
[Selecting SIRIUS broadcast channel], page 2-7. PART 2 AUDIO SYSTEM Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Preset <1 to 6>"
"Preset Up"
"Preset Down"
(b) Selecting with Channel Up/Down
or Press the
keys on the control panel or the or buttons on SIRIUS1, SIRIUS2, or SIRIUS3 mode screens for less than 0.8 second. The previous or next channel will be selected. INFORMATION If in Channel mode, the channel is selected from all channels. If in Category mode, the previous or next channel of each category is selected. Press the
or
keys on the control panel or the or keys on the steering wheel remote controller or the or buttons on SIRIUS1, SIRIUS2, and SIRIUS3 mode screens for more than 0.8 second to 2-8 AUDIO SYSTEM quickly move to the nearest desired channel. Once the button is released, the current chan-
nel will be selected. 2. Press the knob at the desired chan-
nel. The selected channel will begin playing. Voice Command
(d) Selecting channel through channel/
1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Channel Up"
"Channel Down"
(c) Selecting a channel through manual search 1. Turn the knob on the control panel in clockwise or counterclockwise direction. Each click on the knob will display the channel information of the previous or next channel. The current playing channel will continue to be played. INFORMATION If in Channel mode, the channel is selected from all channels. If in Category mode, the first channel of each category is selected. category list
1. Press the If in channel mode, the Channel list screen button. will be displayed. If in category mode, the Category list screen will be displayed. Select the desired category button to dis-
play the channel list screen for the corres-
ponding category. O p e r a t i n g t h e r a d o i 2. Select the desired channel button. The previous screen will be restored and the selected channel will begin playing. the button. The previous screen will be restored and the selected channel will begin playing. INFORMATION Storing SIRIUS presets 1. Select the desired channel.
[Selecting SIRIUS broadcast channel], page 2-7. To prevent inputting a channel which exceeds the channel range, numbers which cannot be inputted are set to disabled state. 2. Press the preset button for over 0.8 second. The frequency will be saved along with beep sound. Voice Command INFORMATION
(e) Selecting channel by directly inputting remote controller. 1. Press the
key on the steering wheel the channel number 1. Press the button. The Channel search screen will be dis-
played. 2. After the beep sound, say a command.
"Channel<0 to 223>"
Six preset frequencies each for SIRIUS1/
SIRIUS2/ SIRIUS3 modes can be stored using the above instructions. 2. Input desired channel number, and press AUDIO SYSTEM 2-9 PART 2 AUDIO SYSTEM
button. Scanning SIRIUS broadcast channel 1. Press the SCAN (under 0.8 second): Scans all channels for 5 seconds each if in channel mode. If in category mode, scans all channels within the current category for 5 seconds each. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Scan"
PRESET SCAN (over 0.8 second): Scans the 6 preset channels within the current band for 5 seconds each. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Preset Scan"
2-10 AUDIO SYSTEM 2. Press the
button again to continue playing the channel. The scan will be terminated and the current channel will continue to play. INFORMATION Within the Channel list screen, if the button next to each channel name is pressed, the selected channel will be excluded from SCAN operation. Browsing detailed information about the SIRIUS channel 1. Press the
button. The detailed information (Title, Artist and Composer) for the current channel will be displayed. 2. Press the
button. The detailed information will be turned off. When scanning has completed an entire revolution, the scan function is automatical-
ly terminated and the previous played chan-
nel will be restored. Channel 0 is the radio ID and contains infor-
mation required for SIRIUS activation. Operating the CDP About CDP Precautions upon handling discs After using a disc, keep it in the original case to prevent it from becoming scratched, which may cause the CD to make popping sounds. Do not use heart-shaped discs, octagon-sha-
ped discs, or any other abnormally shaped disc. Such discs may be the cause of mal-
functions. Do not clean discs with chemical solutions such as record sprays, antistatic sprays, antis-
tatic liquids, benzene, or thinners. Such materials may cause the surface of DISC to be unrecoverable. Do not expose the disc to direct sunlight for prolonged periods of time. Such exposure may lead to disc deformation. Never place paper on either side of the disc or write on disc surfaces. Sharp writing utensils and inks used in felt-tip pens may cause damage to disc surfaces Clean fingerprints and dust off the signal surface (coated side) of the disc with a soft cloth. Only soft cloths should be used as there are no grooves for dust to get in as is the case with LPs. Copy-protected CDs such as S-type CDs may not function in the device. DATA CDs are not supported by the device.
(However, such discs may operate abnor-
mally.) For safe and efficient operation Do not disassemble the CDP for repair purposes. Contact your place of purchase in the case of malfunction. (Complete service assistance will not be provided if the user disassembles the device.) Dust, scratch, and other substances may cause popping sound while playing as well as sound deterioration. Do not use water to clean the device. Exposure to water may cause damage to the device. O p e r a t i n g t h e C D P Be cautious not to introduce foreign subs-
tances into the disc insert slot. Foreign substances may cause damage to the interior of the device. The device may fail to operate properly in extremely hot or cold temperatures. Discontinue the use of the device unless normal temperature is maintained.
( The operational temperature range is:
-10 ~ 65). Steam can be condensed on the fiberoptic lens due to rain, wet conditions, or upon operating the heating system. Skipping may occur to the audio when dri-
ving on bumpy roads for prolonged periods of time or upon severe shock to the vehicle. Do not use chemical solvent to clean the device. Such solvents may cause damage to the surfaces of the device. Always use a clean and dry cloth. AUDIO SYSTEM 2-11 PART 2 AUDIO SYSTEM WARNING !
Always give your full attention to driving. Avoid operating your system in such a way that you can be distracted driving vehicle operation. Supported disc formats The disc types supported by this device are as shown below. Disc Size 3-inch (7.6 cm) 5-inch (12.7cm) 2-12 AUDIO SYSTEM Disc Type Disc Media DIsc Format CD CD-R CD-RW Multisession-CD SACD SACD(Hybrid) CD-DA MP3 WMA DTS-CD CD-ROM CD-G CD-EXTRA CD-TEXT CD SACD Disc format Audio format CD MP3 WMA LPCM MPEG1, Layer3 MPEG2, Layer3 MPEG2.5 Ver9 CD-R or CD-RW DISC burned with a bulk CD without quality guarantees may not be recognized by the device. Inserting an abnormal disc may result in faulty operation or recognition. Disc/Content format compatibility Ordinary disc compatibility This device has been designed/ manufactu-
red to be compatible with software bearing the following logo marks. Audio-CD CD-R CD-RW CD-R/RW discs (Audio CD and MP3 CD) created with CD-writing devices or perso-
nal computers may not properly function in the device. This may be caused by damaged recording method, contamina-
tion by dirt and other foreign substance on the disc surfaces or play lens, and various other reasons. Special formats or special features regar-
ding software CD-R/RW Compatibility. This device operates as a CD-ROM including CD-R and CD-RW DISC written in CD Audio or MP3 CD Format. However, other contents may cause abnor-
mal disc operation such noise. The writing of CD-R and CD-RW discs with this device is not supported. Although CD-R/RW discs burned as audio CDs which have not been finalized are not supported by the device, some information such as play time may be displayed. PC-created DISC compatibility. When recording a disc with a personal com-
puter, even discs recorded in a "format com-
patible" with the formats described above may not operate on the device caused by software settings of the recording applica-
tion. Compressed audio compatibility This device plays audio files compressed by MPEG-1 audio stream layer 3(MP3) using 32, 44.1 and 48kHz fixed bit rates. Incompatible files are not supported. Variable bit rate files may operate, but the play time information may not be properly displayed. Physical formats of CD : Model 1, Model 2 XA format 1. This device only supports tracks with file extension of ".MP3" or ".WMA". This device does not support multi-session discs. This device supports a maximum of 256 fol-
In such cases, contact the software develo-
ders and maximum 512 files. per. Additional information regarding compati-
bility can be found on the CD-R/ RW software disc box. Folders and files which exceed this limit will not be supported. There are various bit rates which can be encoded onto a MP3 file. DVD-R/RW are not supported by the device. his device has been designed to be compa-
O p e r a t i n g t h e C D P tible with various bit rates. Audio which has been encoded at 128kbps will sound similar to CD audio sound quality. AUDIO SYSTEM 2-13 PART 2 AUDIO SYSTEM Although this device supports low bit rate MP3 tracks, such tracks may only provide low quality sound. For stable operation, the use of files in 95kbps ~ 192kbps bit rate range and 44.1kHz SAMPLING frequency is recom-
mended. 2-14 AUDIO SYSTEM Inserting/Ejecting Disc INFORMATION If the operation mode had been in Audio mode before ejecting the disc, the device will be converted back to Audio mode. I f t h e o p e r a t i o n m o d e h a d b e e n i n Navigation mode, then Navigation mode screen will remain. If the disc is straddled on the slot without removing for approximately 10 seconds, the disc will be re-inserted automatically into the disc player. In such a case, the disc will not begin playing automatically. Inserting a Disc Insert the disc into the slot. The disc will begin playing automatically after it has been inserted. INFORMATION If the operation mode had been Audio mode before inserting the disc, the device will convert to the DISC mode screen and begin playing. If the operation mode had been Navigation mode, then Navigation mode screen will remain and the disc play status will be dis-
played through the Audio bar. Ejecting a Disc Press the The disc will immediately be stopped and ejected. key. CD Listening to CD music CD screen and functions
G F D E
J L H I K
[REW/FF CD track], page 2-17. I
button : Plays the tracks on the disc in random order.
[Setting Random function for CD music]
, page 2-17. J button : Repeats the current playing track.
[Setting Repeat function for CD music], page 2-18. K button : Scans all tracks on the
Mode display : Displays that the current disc for 10 seconds each. O p e r a t i n g t h e C D P
[Scanning CD track], page 2-18. L
button : Adjusts the FAD/BAL, BASS/MID/TREB controls.
[Audio sound setting], page 1-11. 1. Insert the CD or press the key on the control panel if the CD is already inser-
ted. 2. Select the desired track.
[Selecting the CD track], page 2-16. Voice Command mode is CD mode.
RANDOM/REPEAT/SCAN indicator : If RANDOM/REPEAT/SCAN is operating, the switch is displayed.
Play time : Displays the play time.
Track number : Displays the current playing track number. 1. Press the
key on the steering wheel D button : Plays or pauses the cur-
remote controller. rent track. 2. After the beep sound, say a command.
"DISC"
"CD"
"CD Track <1 to 665>"
E F G H button : REW or FF
[Selecting the CD track], page 2-17. button : Previous or next-
track. AUDIO SYSTEM 2-15 PART 2 AUDIO SYSTEM Selecting the CD track There are 2 ways to select a CD Track - (a) selecting through Track Up/Down, (b) selec-
ting through searching Track. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
or REW/FF CD track Press and hold the
keys on the control panel or steering wheel remote controller or the buttons for over 0.8 second. The track will play 20 times faster while hol-
ding the button and return to normal play when the button is released. or Setting Random function for CD music Press the button. Each press will change the function in the fol-
lowing order: RANDOM RANDOM OFF RANDOM RANDOM : plays all tracks in the disc in ran-
"Next Track"
"Previous Track"
(b) Selecting track through search 1. Turn the knob on the control panel in clockwise or counter-clockwise direction. Each click on the knob will display the information of the next or previous track. The current playing track will conti-
nue to be played. 2. Press the knob at the desired track. dom order. The searched track will begin playing.
(a) Selecting through Track Up / Down
or Press the
keys on the control panel or the or keys on the steering wheel remote controller or the or buttons on the screen for less than 0.8 second. The next or previous track will begin playing. INFORMATION If the
key on the control panel or the
key on the steering wheel remote controller or the button on the screen is pressed shortly while the track has played for more than 3 seconds, the start of the current track will begin playing. If the track has been playing for less than 2 seconds, the start of the previous track will begin playing. 2-16 AUDIO SYSTEM Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Random"
Say "Normal Play" in order to terminate the set Random function. Setting Repeat function for CD music Press the button. Each press will change the function in the following order:
REPEAT REPEAT OFF REPEAT
* REPEAT : repeats the current playing track. Voice Command Scanning CD track 1. Press the
button. Each press will change the function in the following order :
SCAN SCAN OFF SCAN. SCAN : Scans all tracks in the disc for 10 seconds each. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Scan"
Say "Normal Play" in order to terminate the set Scan function. O p e r a t i n g t h e C D P 1. Press the
key on the steering wheel 3. Press the
button again to continue remote controller. 2. After the beep sound, say a command.
"Repeat Track"
Say "Normal Play" in order to terminate the set Repeat. listening to the track. The scan will be terminated and the current track will continue to be played. INFORMATION When scanning has completed an entire revo-
lution, the scan function is automatically ter-
minated and the previous played track will be restored. AUDIO SYSTEM 2-17 PART 2 AUDIO SYSTEM MP3 MP3 disc related information and precaution Information The MP3 file standards supported by the device are as follows. Accept able standard: MPEG1 AUDIO LAYER 3 Acceptable sampling frequency: 32, 44.1, 48 (KHz) Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) Recommended bit rate & reference sam-
pling frequency: 96,128, 192 kbps fixed bit rate /44.1KHz ID3 tag This device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. Supported media The MP3 media supported by the device are CD-ROM and USB. 2-18 AUDIO SYSTEM Supported media formats This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below. Maximum directory layers: 8 layers Maximum folder length: 64 Bytes, file name Although the full length of the file name can be displayed by using the scroll function, the full length of folder names may not be dis-
played as the scroll function does not operate when displaying folder names. Precaution Please use an MP3 bit rate which is less than 128 kbps. The sound quality cannot be guaranteed for MP3s exceeding 128kbps. length: 64 Bytes Supported characters for folder name/ file name: Alphanumeric characters, Korean standard character set 2350 characters, Simplified Chinese 4888 characters Maximum number of folders which can be stored onto one disc: 256 folders (including ROOT directory) Maximum number of files which can be stored onto one disc: 512 files Precautions upon burning MP3 files The use of ISO 9660 LEVEL 2 JULIET format is recommended when burning MP3 files. Burning in other formats may abnormally display the file names. It is possible to display up to 32 characters for file and folder names in case of UNICODE, and up to 64 characters in case of ASCII. Listening to MP3 music MP3 screen and functions
E D F G K
H L
N I M 1. Insert the MP3 disc or press the key on the control panel if the MP3 disc is already inserted. 2. Select the desired file.
[Selecting the MP3 file], page 2-21. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
Mode display: Displays that the current mode is MP3 disc mode. (MP3 files on DVDs are not supported.)
REPEAT/RANDOM/SCAN indicator: If REPEAT/RANDOM/SCAN is operating, the switch is displayed.
Play file position : Current playing file /
total files
Play time: Displays the play time.
Folder name: Displays the folder name.
File name: Displays the file name. O p e r a t i n g t h e C D P E F button : REW or FF.
[REW/FF MP3 file], page 2-22. G H button : Previous or next track.
[Selecting the MP3 file], page 2-21.
button : Plays all files on the disc or folder in random order.
[Setting Random function for MP3 file] , I J page 2-22. J button : Repeats the current playing folder or file.
[Setting Repeat function for MP3 file], page 2-23. K button : Scans all files on the disc or folder for 10 seconds each. L M
[Scanning MP3 file], page 2-23.
button : Displays the MP3 folders and file lists for the disc.
[Selecting the MP3 file], page 2-21.
button : Displays or hides the detailed file information for the current playing file.
"DISC"
"CD"
"MP3"
D button: Plays or pauses the cur-
the MP3 file], page 2-22.
[Browsing detailed information about rent file. AUDIO SYSTEM 2-19 PART 2 AUDIO SYSTEM
. button : Adjusts the FAD/BAL, BASS/MID/TREB controls.
[Audio sound setting], page 1-11. If the file has been playing for less than 2 seconds, the start of the previous file will begin playing. 2. Press the knob at the desired file. The searched file will begin playing. Selecting the MP3 file There are 3 ways to select an MP3 file - (a) selecting through file up/down, (b) selecting through searching files, (c) selecting through MP3 list.
or
(a) Selecting through File Up / Down Press the
keys on the control panel or the or keys on the steering wheel remote controller or the or buttons on the screen for less than 0.8 second. The next or previous file will begin playing. INFORMATION
key on the control panel or the If the
key on the steering wheel remote controller the button on the screen is pressed shortly while the file has played for more than 3 seconds, the start of the current file will begin playing. 2-20 AUDIO SYSTEM Voice Command
(c) Selecting through MP3 List 1. Press the button.
1. Press the
key on the steering wheel remote controller. The file list of the folder for the current playing file will be displayed. 2. After the beep sound, say a command.
"Next File"
"Previous File"
"Next Folder"
"Previous Folder"
(b) Selecting through search 1. Turn the knob on the control panel in clockwise or counter-clockwise direction. Each click on the knob will display the information of the next or previous file. The current playing file will continue to be played. INFORMATION If the operation of the knob is too rapid, there may be a delay in displaying the file information. INFORMATION If many songs and folders are recorded onto a DISC, file loading time may be longer and cause the play list to be improperly displayed or song search through TUNE operation to operate improperly. In such cases, wait until file loading is com-
plete and try again. W i t h i n t h e M P 3 l i s t s c r e e n , i f t h e
button is pressed while sear-
ching for files within a folder or a page, the current playing file list will become dis-
played. Browsing detailed information about the MP3 file 1. Press the
button. The detailed information (Title, Album, Artist) for the current playing MP3 will be displayed. 2. Press the desired menu to return to the main screen and play the selected file. REW/FF MP3 file Press and hold the
keys on the control panel or the or keys on the steering wheel remote controller or the
or or buttons for over 0.8 second. 2. Press the
button. The file will play 20 times faster while holding the button and return to normal play when the button is released. The detailed information will be turned off. O p e r a t i n g t h e C D P Setting Random function for MP3 file Press the button. RANDOM (less than 0.8 second) : Plays all files in the disc in random order FOLDER RANDOM (over 0.8 second) : Plays the files in the current folder in random order. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Random"
"Random Folder"
Say "Normal Play" in order to terminate the set Random function. 3. Press the button again to continue listening to the current file. The random selection will be terminated and the current file will continue to play. AUDIO SYSTEM 2-21 PART 2 AUDIO SYSTEM Setting Repeat function for MP3 file 1. Press the button. REPEAT (less than 0.8 second) : Repeats the current playing file FOLDER REPEAT (over 0.8 second) : Repeats the files in the current folder Voice Command Scanning MP3 file 1. Press the SCAN (less than 0.8 second) : Scans all files button.
in the disc and plays for 10 seconds each. FOLDER SCAN (over 0.8 second) : Scans all files in the current folder for 10 seconds each. INFORMATION When scanning has completed an entire revo-
lution, the scan function is automatically ter-
minated and the previous played file will be restored. 1. Press the
key on the steering wheel Voice Command remote controller. 1. Press the
key on the steering wheel 2. After the beep sound, say a command. remote controller.
"Repeat File"
"Repeat Folder"
Say "Normal Play" in order to terminate the set Repeat function. 2. After the beep sound, say a command.
"Scan"
"Folder Scan"
Say "Normal Play" in order to terminate the set Scan function. 2. Press the button again to stop repeating the current file. The repeat selection will be terminated and the current file will continue to play once until the next file starts to play. 2. Press the
button again to continue listening to the file. The scan selection will be terminated and the current file will continue to play. 2-22 AUDIO SYSTEM Operating the external devices MP3 iPod is a registered trademark of Apple Inc. Connecting iPod devices Connect the iPod device as shown in the pic-
ture. The Kia iPod Power cable is needed in order to operate iPod with the audio buttons on the audio system. The USB cable provided by Apple may cause malfunction and should not be used for Kia vehicles. The Kia iPod Power cable maybe purchased through your Kia dealership. Unsupported iPod devices : iPod genera-
tions before iPod 3G, iPod Shuffle, and iPad. CAUTION!
Some functions may not operate properly depending on the firmware version in some iPod or iPhone devices. INFORMATION In order to prevent such malfunction, check the following before connecting your iPod or iPhone device with the Kia iPod Cable. If the battery has been completed dischar-
ged, charge the device for at least 10 minutes before connecting. Turn on the device before connecting. If the device is set to lock, release the lock before connecting. For iPhones, audio will not play if the audio system and BT are paired. Disconnect the pairing before connecting. When there are no songs in the iPod or iPhone or if there is no response from the device after connecting with the Kia Cable, a No Media Connected pop-up message will be displayed for 5 seconds and the previous mode will automatically be restored. In such cases, disconnect the iPod or iPhone and try connecting again. If the message continues even after reconnec-
ting the iPod, check to see if there are any pro-
blems with the iPod device. CAUTION!
O p e r a t i n g t h e e x t e r n a l If a playing iPod is connected to the audio sys-
tem, a high-pitched tone may occur for approximately 1-2 seconds. Please turn the iPod device to pause/stop prior to connecting it to the vehicle. d e v i c e s AUDIO SYSTEM 2-23 PART 2 AUDIO SYSTEM Listening to music from iPod iPod screen and functions E F button : REW or FF. E
H
D F K G L
I
M G H
[REW/FF iPod song], page 2-27. button : previous or next file.
[Selcting an iPod song], page 2-25. I
J
button : plays all songs in the current playing list in random order or ran-
domly in album unit.
[Setting random function for iPod song], page 2-26. J buttons : repeats the current
Mode display: displays that the current playing song. mode is iPod mode.
RANDOM/REPEAT indicator: if RANDOM/
REPEAT is operating, the switch is dis-
played.
Play file position: current playing file / total
[Setting repeat function for iPod song], page 2-27. K
button : converts to the search menu screen.
[Viewing detailed information for iPod files
Play time: displays the play time.
Category name: displays the category name of the playing file.
Title name: displays the title name of the L M song], page 2-27.
button : converts to the search menu screen.
[Selecting an iPod song], page 2-25.
button : adjusts the FAD/BAL, BASS/MID/TREB controls. 1. Connect the iPod or press the key on the control panel if the iPod is already connected. INFORMATION Even if the iPod is connected, the 'No Media Connected' message may be displayed if an error has occurred. In such a case, reconnect the iPod. Voice Command 1. Press the key on the steering wheel playing file. remote controller. 2. After the beep sound, say a command.
"iPod"
2-24 AUDIO SYSTEM D button: plays or pauses the cur-
rent file.
[Audio Sound setting], page 1-10. O p e r a t i n g t h e e x t e r n a l d e v i c e s Selecting music from iPod There are 3 ways to select songs from the iPod device - (a) selecting song through Up/Down,
(b) selecting song through sequential search,
(c) selecting song through menu.
or
(a) Selecting song through Up / Down Press the
keys on the control panel or the or keys on the steering wheel remote controller or the or buttons on the screen for less than 0.8 second. The next or previous song will begin playing. INFORMATION If the key the control panel or the
key on the steering wheel remote controller or the button on the screen is pressed shortly while the song is playing for more than 3 seconds, the start of the current song will begin playing. If the song has been playing for less than 2 seconds, the start of the previous song will begin playing. Voice Command 1. Press the
key on the steering wheel
(c) Selecting song through Menu 1. Press the button. remote controller. The iPod menu screen will be displayed. 2. After the beep sound, say a command.
"Next Song"
"Previous Song"
(b) Selecting song through search 1. Turn the knob on the control panel in clockwise or counter-clockwise direction. Each click on the knob will display the information of the next or previous song. The current playing song will conti-
nue to be played. INFORMATION If the operation of the knob is too rapid, there may be a delay in displaying the song information. 2. Press the knob at the desired song. The searched song will begin playing. 2. Press the button for the desired search method. INFORMATION If the search mode is accessed while playing a song, the most recent searched step will be displayed. The search steps upon initial connection are listed below. AUDIO SYSTEM 2-25 PART 2 AUDIO SYSTEM Playlist Genre Artist 1 Step Playlist Genre Artist Composer composer Album Album 2 Step Artist Album Album 4 Step Song 3 Step Song Album Song Song Song Audiobooks Songs Podcasts Song Song Program Episode REW/FF iPod music Press and hold the
keys on the control panel or the or keys on the steering wheel remote controller or the
or or buttons for over 0.8 second. The song will play 20 times faster while hol-
ding the button and return to normal play when the button is released. 3. Press the desired song button to return to the main screen and play the selected song. 2-26 AUDIO SYSTEM Setting Random function for iPod music Press the button. Each press will change the function in the following order :
Random Album Random Random Off Random... Album Random : plays the song in the cur-
rent play list randomly in album units. However, songs within the same album will be played sequentially. e.g.) Album1(Music1 Music2 Music3
... Music10) Album5 ( Music1 Music2) Album4 (Music1 Music2 Music3) ... RANDOM : Plays all files in the current play list in (All Songs, certain albums, or user designated iPod Playists) randomly regardless of album. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Random"
"Random Album"
Say "Normal Play" in order to terminate the set Random. Setting Repeat function for iPod music 1. Press the button. Each press will change the function in the fol-
lowing order: REPEAT REPEAT OFF REPEAT REPEAT : Repeats the current playing song. Voice Command 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Repeat Song"
Say "Normal Play" in order to terminate the set Repeat function. Browsing detailed information about the iPod music 1. Press the button.
The detailed information (Title, Album and Artist) for the current channel will be dis-
played. O p e r a t i n g t h e e x t e r n a l 2. Press the
button. The detailed information will be turned off. d e v i c e s AUDIO SYSTEM 2-27 PART 2 AUDIO SYSTEM USB MP3 USB MP3 related information and precaution Information The MP3 file standards supported by the device are as follows. Acceptable standard: MPEG1 AUDIO LAYER 3. Acceptable sampling frequency: 32, 44.1, 48 (kHz) Acceptable bit rate : 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) Recommended bit rate & reference sam-
pling frequency: 96,128, 192 kbps fixed bit rate /44.1kHz ID3 tag This device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. Supported media The MP3 media supported by the device are CD-ROM and USB. Supported media formats This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below. 2-28 AUDIO SYSTEM Maximum directory layers: 20 layers Maximum length of folder name/file name:
250Bytes Supported characters for folder name/ file name: Alphanumeric characters, Korean standard character set 2350 characters, Simplified Chinese 4888 characters Maximum number of folders which can be stored onto one USB: 2000 folders (inclu-
ding ROOT directory) Maximum number of files which can be stored onto one USB: 6000 files Precautions upon formatting USB & down-
loading MP3 files The device only supports FAT type USB file system. The device will not play USB media content if the USB is NTFS type. Precaution Please use an MP3 bit rate which is less than 192kbps and a fixed bit rate. The sound quality cannot be guaranteed for MP3s exceeding 192Kbps and operation of specific functions (limited to FF/REW func-
tions) may be abnormal with variable bit rates. Precautions upon handling USB When using the external USB device, make sure to keep the device disconnected and connect only some time after turning on the vehicle ignition. The USB device may be damaged if the USB device already connec-
ted when the ignition is turned on. (USB device is not an electronic automotive com-
ponent) The external USB device may not operate if the USB device already connected when vehicle ignition is turned on or off. The device will not operate when playing a format which is not MP3 or WMA file for-
mats. 1. Only MP3 files with compression rates between 8kbps~320kbps are supported. 2. Only WMA files with compression rates between 8kbps~320kbps are supported. Be cautious of static electricity when connecting/disconnecting the external USB device. O p e r a t i n g t h e e x t e r n a l d e v i c e s Encoded MP3 Players will not be recognized when connected as the external device. When connecting an external USB device, the device may not properly recognize the USB when the USB is in some states. When formatting the external USB device, the device may not properly be properly recognize a Byte/Sector selection other than 512Byte or 2048Byte. The device will only recognize USB devices formatted in FAT 12/16/32. Some USB devices may not operate properly because of compatibility issues. Verify that the external device is supported by the device before starting use. Avoid contact between the USB connector Abruptly disconnecting the external USB device while the USB is operating may cause the device to be damaged or function abnormally. Make sure to disconnect the USB device only after the audio power is turned off or when the audio is operating in a different mode. The amount of time required to recognize the external USB device may differ depen-
ding on the type, size, or file formats stored on the USB. Such differences in the required time are not indications of malfunction. Please wait for the required period of time to recognize the device. with bodily parts and foreign substances. The device supports only USB devices used Repeatedly connecting/disconnecting the USB in a short period of time may cause damage to the device. When disconnecting the USB, an abnormal sound may occur occasionally. to play music files. Do not use the USB I/F to charge batteries or USB accessories which generate heat. Such acts may lead to deteriorated perfor-
mance or damage to the device. The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly to the multimedia terminal of the vehicle. In the case of high capacity USB devices, there are instances where the logical drives are partitioned for user convenience. In this case, only the USB music in the top-
level logical drive will be possible to play. When using partitioned drives, save the desired songs to play on the device only in the top-level logical drive. In addition, certain USB devices are confi-
gured with a separate drive used to install application programs and songs from such drives may not be possible to play for the reasons as described above. The device may not support normal opera-
tion if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected to the device. AUDIO SYSTEM 2-29 PART 2 AUDIO SYSTEM The device may not support normal opera-
tion when using a USB memory type besides the Metal Cover Type USB Memory. The device may not support normal opera-
tion when using formats such as HDD Type, CF, or SD Memory. The device will not support files locked by DRM (Digital Rights Management). The device may not support. Please make sure to use normal operation if the proper connection with the USB memory fails due to vibrations caused by the vehicle. (i-stick type, etc.) Please avoid using USB memory products which can be used as key chains or cellu-
lar phone accessories as they could cause damage to the USB jack. 2-30 AUDIO SYSTEM Please make certain only to use plug type connector products as shown below. Listening to USB music Plug Type Connector Connecting the USB devices Connect the USB as shown in the picture.
1. Connect a USB or press the key on the control panel if the USB is already connected. 2. Select the desired file.
[Selecting the MP3 file], page 2-21. INFORMATION The USB screen and operation method is the same with MP3 mode. Please refer to the MP3 mode section for more information. Voice Command Starting USB IMAGE Mode 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"USB"
Starting USB IMAGE Mode 1. The USB mode will automatically start when the USB is inserted. When in a different mode, repeatedly press the
key to convert to USB mode.
(Each press will change in order of AUX DISC USB) 2. The image will be displayed on the screen. INFORMATION Press the button on the bottom left side to enter either mode. (Supported only when compatible files exist within the USB) USB IMAGE mode menu screen configuration
Mode display : display that the current mode is <USB Image> mode.
Folder name : displays the name of the fol-
der where photo files are located.
File name : displays the file name of the current photo.
File index : displays the number of Image files within the USB (current file / all files)
Slide Show Interval : displays intervals of 5, 10, and 20 seconds. button : displays the previous photo.
Slide Show View : displays photos in inter-
vals of 5, 10, and 20 seconds. AUDIO SYSTEM 2-31 O p e r a t i n g t h e e x t e r n a l d e v i c e s Operating USB IMAGE Mode INFORMATION For details on setting up the frame, refer to the frame setup page within Screen setup. Restrictions while driving-Image Play related buttons cannot be used while the vehicle is in motion. There are five buttons such as < / /
/ / >. PART 2 AUDIO SYSTEM button : displays the next photo.
USB music(MP3) mode button :
converts to <USB Music> mode.
button : displays the <Image List>
(a) Moving to next IMAGE 1. Press the screen. screen.
button : hides the button display.
button : upon turning off power, saves the current image as the frame screen image.
button : allows changes to slide show interval. 2. Within the Image screen, press the or
button to flip through each file.
(b) Displaying USB IMAGE Slideshow Interval 1. Repeatedly press the button at the bottom to change the slideshow interval
(converts in time intervals of 5 seconds 10 seconds 20 seconds 5 seconds).
(c) Registering Frame 1. Press the button at the bottom of the <Image> screen. The currently dis-
played image will be registered as the frame. 2-32 AUDIO SYSTEM AUX Playing AUX AUX screen Connecting AUX Connect the external Audio player as shown in the picture. External Audio Device Connect an AUX or press the key on the control panel if the AUX is already connec-
ted. Audio AUX screen INFORMATION Voice Command Connect only by using AUX terminals. 1. Press the
key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Line In"
O p e r a t i n g t h e e x t e r n a l d e v i c e s AUDIO SYSTEM 2-33 PART 3 NAVIGATION SYSTEM PART 3 NAVIGATION SYSTEM Limitations of the navigation system 3-2 GPS signal reception state 3-2 Vehicle position display 3-3 Route Guidance 3-4 Route Re-calculation 3-4 Starting navigation system 3-5 Map Functions 3-5 Current position map screen
(without route) 3-5 Switching map mode
(North Up / Heading Up) 3-6 Viewing GPS signal state 3-7 Changing the map scale 3-8 Displaying / Hiding POI icons on the map 3-9 Displaying/Hiding Q.POI icons 3-9 Displaying / Hiding icons other than Q.POI icons 3-9 Making a call to POI 3-10 Scrolling map 3-11 Setting a destination 3-12 Destination menu screen and functions 3-12 Searching a Destination 3-13 Searching an Address 3-13 Searching a Previous Destination 3-17 Searching an Intersection 3-17 Searching a POI 3-20 Searching from Address book 3-24 Searching for Emergency facilities 3-25 Searching your Home 3-25 Searching favorite places 3-26 Searching from MAP 3-26 Searching POI by local POI list 3-26 Operating after searching a destination 3-27 Changing destination position 3-27 Setting as Destination / waypoint 3-27 Adding to address book 3-27 Operating after setting a destination 3-28 Starting Route Guideance 3-28 Route guidance screen 3-28 Selecting other route 3-29 Route guidance 3-30 Route menu screen and functions 3-30 Finishing route guidance
(Delete Destination) 3-30 Route overview (View Entire Route) 3-31 Changing Route option 3-32 Editing waypoints 3-32 Deleting waypoints 3-34 Re-ordering waypoints 3-34 Setting detour distance 3-35 Setting avoid streets on route 3-35 Setup and Information 3-36 Setup menu screen and functions 3-36 Main setting 3-37 Setting keyboard for inputting letter 3-37 Setting voice command feedback ON/OFF 3-37 Setting Language 3-37 System information and update 3-37 Initializing system 3-37 Navigation setting 3-38 I I N A V G A T O N S Y S T E M Traffic Setup 3-52 Traffic Information 3-52 Help 3-54 PART 3 NAVIGATION SYSTEM Setting units (mile / km) 3-38 Setting arrival time and distance display 3-38 Registering avoid area 3-38 Editing avoid area 3-40 Deleting avoid area 3-41 Deleting all avoid areas 3-41 Setting Q.POI icons 3-42 Setting estimate travel time 3-42 My places setting 3-43 Registering new address in address book 3-43 Editing an address of address book 3-45 Deleting an address of address book 3-46 Deleting an address book 3-47 Registering home address 3-48 Deleting home address 3-48 Registering favorite place 3-49 Deleting favorite place 3-50 Voice guidance volume setting 3-51 Voice guidance volume control 3-51 Adaptive volume control ON/OFF 3-52 NAVIGATION SYSTEM 3-1 PART 3 NAVIGATION SYSTEM Limitations of the navigation system GPS signal reception state As the GPS satellite frequency is received /
transmitted in straight lines, reception may not work if devices are placed on or near the GPS antenna or when traveling through the following locations. Tunnels Basement parking structures 3-2 NAVIGATION SYSTEM Underneath an overpass Roads within canyons Roads within forested areas Areas near high rise buildings I I N A V G A T O N S Y S T E M When using a tire with an incorrect size specification. When the tire pressure for the 4 tires are dif-
ferent. When the replacement tire is a worn or used tire (Especially studless tires having passed a 2nd seasons, etc.) When driving near high-rise buildings If a roof carrier has been installed When driving under high speeds or having calculated a long-distance route. Vehicle position display If multipass errors occur due to reflections from buildings or related causes, the current position mark on the navigation may differ from the actual position of the vehicle. The position of the vehicle on the naviga-
tion may be different from the actual posi-
tion if the vehicle is under the following conditions. If such differences occur, driving for a short period of time will automatically correct the position of the vehicle through map matching or GPS information (several minutes may be necessary in certain cases). When driving on a Y-shaped road with a narrow angle, the current position may be displayed in the opposite direction. If the vehicle is loaded onto a ferry or a car transport vehicle, the current position mark may be stalled on the last position prior to loading. When driving on a spiral-shaped road. When driving in mountain regions with sharp turns or sudden brakes. When entering a road after having been in an underground parking structure, building parking structure, or turntable with many rotations. When the tires have recently been replaced
(Especially upon use of spare or studless tires) If the battery terminal is removed. When driving in city streets, the current position may be displayed on the opposite side or on an off-road position. When changing the zoom level from the maximum zoom in level to a different zoom level, the current position mark may be dis-
played on a different road. When driving in heavy traffic with frequent gostops in traffic or intersections. When driving under slippery conditions, such as heavy sand, snow, etc. When driving with the tire chain in place. NAVIGATION SYSTEM 3-3 PART 3 NAVIGATION SYSTEM Route Guidance Route Re-calculation Suitable route guidance may not occur caused by search conditions or the driving position. Guidance to go straight may be given while driving on a straight road. Guidance may not be given even when hav-
ing turned at an intersection. There are certain intersections in which guidance may not occur. A route guidance signaling for a U-Turn in a No U-Turn location may occur. A route guidance signaling entrance into a no enter zone may occur (No enter zone, road under construction, etc.). Guidance may be given to a position removed from the actual destination if roads to reach the actual destination do not exist or are too narrow. 3-4 NAVIGATION SYSTEM Faulty voice guidance may be given if the vehicle breaks from the designated route
(ex: if a turn is made at an intersection while the navigation provided guidance to go straight). Map Data may be missing or incorrect caus-
ing route guidance to not be given. The following phenomena may occur after conducting route recalculation. Guidance may be given to a position differ-
ing from the current position when turning at an intersection. Route Recalculation may take a longer peri-
od of time when driving under high speeds. A route guidance signaling for a U-Turn in a No U-Turn location may occur. A route guidance signaling entrance into a no enter zone may occur (No enter zone, road under construction, etc). Guidance may be given to a position removed from the actual destination if roads to reach the actual destination do not exist or are too narrow. Faulty voice guidance may be given if the vehicle breaks from the designated route
(ex: if a turn is made at an intersection while the navigation provided guidance to go straight) I I N A V G A T O N S Y S T E M Starting navigation system Map Functions Current position map screen
(without route) Press the Navigation mode key ( ,
, , ). The Caution screen will always be displayed when first entering into Navigation mode. Read the contents of the caution screen carefully and press the
button. Press the key on the control panel to display the map of current position and the neighboring area.
D E F
F
GPS signal state indicator : displays the state of GPS signal reception.
[Viewing GPS signal state], page 3-7.
Map scale level indicator : displays the cur-
rent map scale.
[Changing the map scale], page 3-8.
Landmark icons : landmark icons are dis-
played on the map when the map scale level is set to under 300 ft (100m depend-
ing on map data)
[Appendix : landmark icons], page 6-5.
POI icons : POI icons are displayed on the map when the map scale level is set to under 0.5 mi (800m).
[Appendix : POI icons], page 6-5.
Current vehicle position icon : displays the current position of the vehicle. NAVIGATION SYSTEM 3-5 PART 3 NAVIGATION SYSTEM D North Up / Heading Up switch : displays the current map mode and the map mode can be switched between North Up and Heading Up.
[Switching map mode], page 3-6. E POI : displays or hides the POI icon on the map.
[Displaying/Hiding POI icons on the map], page 3-9. F Map scale : increases or decreases the map scale.
[Changing the map scale], page 3-8. Switching map mode (North Up /
Heading Up) The vehicle icon is displayed in the center position of the map. Each time the compass button is pressed, the screen will switch in the order shown below. Heading Up North Up Heading Up ... INFORMATION All map screens (map screen after setting des-
tination & whole route display screen) except the current position screen will always be dis-
played in North Up mode. North Up : displays the map always facing the North direction regardless of the direc-
tion which the vehicle is traveling. Heading Up : displays the map always fac-
ing the direction which the vehicle is travel-
ing. The vehicle icon is displayed in the lower center position of the map. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"North Up"
"Heading Up"
3-6 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Viewing GPS signal state The state of GPS signal reception is displayed as shown below.
GPS information may not operate under the following conditions. When buildings, tunnels, or other obstruc-
(active) :
GPS reception is satisfactory.
(inactive) :
GPS reception is unsatisfactory.
[System information and update], page 3-51. INFORMATION GPS (Global Position System) : GPS is a sys-
tem developed and operated by the United States which determines the current loca-
tion of the user (longitude, latitude, etc.) by generally using 4 or more satellites. This system is used with related GPS informa-
tion, various sensors, road map data, and other navigation related information. tions block satellite signals. When materials are placed above the GPS antenna and block satellite signals. When the satellite does not transmit sig-
nals (signal transmission is controlled by the satellite control center in the United States and may not transmit when under repair, modification, etc). When a digital cellular phone (1.5GHz) is placed near the GPS antenna. This system uses GPS information, various sensors, road map data, and other related information to display the current position. Errors may occur if the satellite is transmit-
ting inaccurate signals or only two or less satellite signals can be received. Errors which occur in such conditions can-
not be corrected. NAVIGATION SYSTEM 3-7 Level 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Actual distance mi / ft 150 ft 300 ft 700 ft 0.25 mi 0.5 mi 1 mi 2 mi 4 mi 8 mi 16 mi 32 mi 64 mi 130 mi 250 mi km / m 50 m 100 m 200 m 400 m 800 m 1.6 km 3.2 km 6.4 km 12 km 25 km 50 km 100 km 200 km 400 km
PART 3 NAVIGATION SYSTEM Changing the map scale Press the will be increased or decreased by one level. button. The map scale or INFORMATION or button is pressed, Each time the the scale bar will be displayed. The scale can be changed by directly pressing the scale level on the scale bar. The green color on the scale bar indicates the current scale level while the orange color indi-
cates the selected scale level.
Press the ond. The scale will continuously change.
If the scale range limit is reached, the button for over 0.8 sec-
or or button will be disabled. The map scale range is between 1 and 14:
10,240,000 ~ 1 : 5,000. 3-8 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Zoom In"
"Zoom Out"
"Zoom Maximum"
"Zoom Minimum"
"Zoom level <1 to 14>"
"Zoom <actual distance>"
" (ex. Zoom 700ft)"
Displaying / Hiding POI icons on the map Displaying/Hiding Q.POI icons 1. Press the button. INFORMATION
The current displayed POI icons are high-
lighted while the icons not being displayed are shown as normal buttons.
If there are no POI icons being displayed, Related menu buttons will be displayed at the bottom of the screen. the button will be disabled.
POI icons are displayed when the scale is INFORMATION The Q.POI icons are set to
- Hotel,
- Gas Station,
- Golf Course,
- Fast Food (6 icons) by default.
- Parking,
- Bank, under 0.5 mi (800m). Displaying / Hiding icons other than Q.POI icons 1. Press the button. This setting can be changed in SETUP.
[Setting Q.POI icons], page 3-42. Related menu buttons will be displayed at the bottom of the screen. 2. Press the button. INFORMATION Q.POI stands for Quick POI and refers to the function which turns POI icon display on or off on the map. NAVIGATION SYSTEM 3-9 2. Press the icon buttons to display or hide. To turn off all POI icons displayed on the map, press the button. PART 3 NAVIGATION SYSTEM
(a) by category list 3. Press the desired main category button. 5. If the button is pressed, the selected menus will be displayed or hidden on the map screen. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Show <POI name>" (ex. Show ATM)
"Hide <POI name>" (ex. Hide ATM)
"Hide All"
Making a call to POI After searching a POI, the POI phone number information can be used to make a call to the POI facility. 1. Use the various search methods, such as the map scroll function, Q.POI search function, and destination search function to search for a POI. 4. Select the desired sub category menu to display or hide (Multiple selections are pos-
sible). Press the selected menu again to cancel the selection. 3-10 NAVIGATION SYSTEM 2. Press the button. INFORMATION Scrolling map Making a call is not possible if there is no telephone information for a POI or if there is no mobile phone connected through Bluetooth. For more information of mobile phone authentication through Bluetooth or detailed information on conducting search, re fe r to
[ Pa i r i n g a n d co n n e c t i n g a Bluetooth phone], page 5-4. Press the map area on the map screen. The selected point will be centered on the screen and the scroll mark will be displayed. Information about the marked point and straight line distance from the current posi-
tion will be displayed at the top of the screen. I I N A V G A T O N S Y S T E M 3. Bluetooth is used to make a call to the POI facility. 4. Once the call is ended, the map is restored to the current vehicle location. INFORMATION If a map area on the map screen is pressed, the map will continuously scroll in the corre-
sponding direction until the pressing is released. NAVIGATION SYSTEM 3-11 I Emergency : sets the destination through emergency facilities search.
[Searching for Emergency facilities], page 3-25 . J HOME : sets the stored HOME as the desti-
nation.
[Searching your Home], page 3-25 . K Favorite place ~ : sets the destina-
tion with one of the stored favorite places.
[Searching favorite places], page 3-26 . PART 3 NAVIGATION SYSTEM Setting a destination Destination menu screen and functions Press the key on the control panel to display the destination menu screen. 3-12 NAVIGATION SYSTEM E H D G J K F I D Address : sets the destination through address search.
[Searching an Address], page 3-13. E Previous Dest : sets the destination through the previous destination list.
[Searching a Previous Destination], page 3-17 . F Intersection : sets the destination through intersection search.
[Searching an Intersection], page 3-17. G POI Search : sets the destination through POI Category search.
[Searching a POI], page 3-20 . H Address Book : sets the destination through address book search.
[Searching from Address book], page 3-24 . I I N A V G A T O N S Y S T E M Searching a Destination Searching an Address There are 2 ways to set the destination through address search-(a) by street, (b) by city. 5. Select the desired state from the list to change the state.
(a) by street 1. Press the key. 4. Input the State name and press the
2. Press the button. button. If the number of matches with the input is less than 4 results, then the state list screen will be displayed automatically. If the number of matches is only one result, then the state will automatically be changed without having to manually select the state. 6. Press the button. 3. Press the
button to change the state. NAVIGATION SYSTEM 3-13 PART 3 NAVIGATION SYSTEM 7. Input the House number and Press the
button to complete.
button. If the House number is not recognized, press the In this case, the range of house numbers will be displayed during the last step. 9. If the desired street from the list is selected, the corresponding position will be dis-
played on the map. INFORMATION If more than 30 cities exist with the selected street, then the city input screen will be dis-
played. If less than 30 cities exist, then the city selection screen will be displayed. 8. Input the Street name and press the
button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 3-14 NAVIGATION SYSTEM
10. Input the city name and press the button to complete. If the number of matches with the input is less than 4 results, then the list screen will be dis-
played automatically. 11.Select the desired city from the list. I I N A V G A T O N S Y S T E M Input the House number and press the 7. Input the city name and press and press the
button to complete.
button. The corresponding position will be dis-
played on the map. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically.
(b) by city 12. This screen will be displayed if the House number had not been inputted during step 6 and more than 2 house numbers ranges exist. Select the desired House number range. 6. Press the button. 8. Select the desired city from the list. 13. This screen will be displayed if the House number had not been inputted and only one house numbers range exists. NAVIGATION SYSTEM 3-15 PART 3 NAVIGATION SYSTEM 9. Input the house number and press the
button to complete. If the House number is not recognized, press the In this case, the range of house numbers will be displayed during the last step.
button. 11. Select the desired street from the list and the corresponding position will be dis-
played on the map. 12. This screen will be displayed if the House number had not been inputted during step 8 and more than 2 House number ranges exist. Select the desired House number range. 13. This screen will be displayed if the House number had not been inputted during step H and only one House number range exists. Select the house number range and Press the button to complete. The corresponding position will be dis-
played on the map. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Find address"
[Find address], page 5-19. 10. Input the Street name and press the
button to complete. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 3-16 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Searching a Previous Destination 1. Press the key. 2. Press the button. Searching an Intersection There are two ways to set the destination through intersection search-(a) by street, (b) by city. 1. Press the key. 2. Press the
button.
4. Input the state name and press the button. If the number of matches with the input is less than 4 results, then the state list screen will be displayed automatically. If the number of matches is only one result, then the state will automatically be changed without having to manually select the state. 3. Select the desired previous destination. The corresponding position will be displayed on the map. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Previous destination"
[Previous destination], page 5-24.
"Previous start point"
[Previous start point], page 5-25. 3. Press the
button to change the 5. Select the desired state from the list to state. change the state. NAVIGATION SYSTEM 3-17 PART 3 NAVIGATION SYSTEM
(a) by street 6. Press the button. 8. Select the desired 1st street from the list. 10. Select the desired 2nd street menu from the list. The corresponding position will be displayed on the map. 9. Input the name of the 2nd street and press 7. Input the name of the 1st street and press
button. the If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically.
button. the If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 11. If the selected 2nd street is within more than 2 cities, then the city list screen will be displayed. Select the desired city menu from the list. The corresponding position will be dis-
played on the map. 3-18 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M
(b) by city 6. Press the button. 8. Select the desired city name. 10. Select the desired 1st street menu from the list. 9. Input the name of the 1st street and press 7. Input the city name and press the
button. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically.
button. the If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 11. Input the name of the 2nd street and press
button. the If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. NAVIGATION SYSTEM 3-19 PART 3 NAVIGATION SYSTEM Searching a POI There are 3 ways to set the destination through POI search - (a) by category, (b) by name, (c) by phone number. 1. Press the key. 2. Press the button. 12. Select the desired 2nd street menu from the list. The corresponding position will be dis-
played on the map.
4. Input the state name and press the button. If the number of matches with the input is less than 4 results, then the state list screen will be displayed automatically. If there is only one matching result, then the state will automatically be changed without having to manually select the state. 3. Press the button. 13. If the selected 2nd street is within more than 2 cities, then the city list screen will be displayed. Select the desired city menu from the list. The corresponding position will be displayed on the map. 3-20 NAVIGATION SYSTEM 5. Select the desired state from the list to change the state. I I N A V G A T O N S Y S T E M
(a) By category Searches for facilities nearby the current posi-
tion or from the city center.
(a-1) Near current position Searches for facilities within a 50 mi (80Km) radius of the current position. 6. Press the button. 8. Press the desired main category menu. 9. Press the desired sub category menu. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Find nearest POI"
[Find nearest POI], page 5-20. 10. Select the desired menu button. The corresponding position will be dis-
played on the map. 7. Press the button to search for facilities nearby the current posi-
tion, or press the button to search for facilities in the near city center. NAVIGATION SYSTEM 3-21 PART 3 NAVIGATION SYSTEM
(a-2) Near city center Searches for facilities from the city center. 8. Input the city name and press the
button. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically. 10. Press the desired main category. 12. Select the desired menu button. The corresponding position will be dis-
played on the map. INFORMATION The distance on each POI item button refers to the distance from the city center. 11. Press the desired sub category. 9. Press the desired city menu. 3-22 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M
(b) By name 6. Press the button. Changing City 1. Press the 2. Input the city name and press the button.
button. 3. Select the desired city name. 8. Select the desired POI menu. The corresponding position will be dis-
played on the map. Changing Category 1. Press the button. 2. Select the desired main category menu. 3. Select the desired sub category menu. INFORMATION
(c) By phone number When necessary, the search conditions for the city and category can be changed by pressing the button. 7. Input the name of the POI and press the
button. If the number of matches with the input is less than 4 results, then the facilities list screen will be displayed automatically. 6. Press the button. NAVIGATION SYSTEM 3-23 PART 3 NAVIGATION SYSTEM Searching from Address book 1. Press the key. 2. Press the button. 7. Input the phone number and Press the
button to complete. The corresponding position will be dis-
played on the map. Voice Command 1. Press the key on the steering wheel 3. Select the desired address book (user) remote controller. menu. 4. Select the desired address name from the list. The corresponding position will be displayed on the map.
[Registering new address in address book], page 3-43. Voice Command 2. After the beep sound, say a command.
"Destination POI by Phone Number"
[Destination POI by phone number], page 5-22. INFORMATION 1. Press the key on the steering wheel remote controller. This system provides 5 address books. Each addresses book can hold up to 200 entries. 2. After the beep sound, say a command.
"Destination by address book"
[Destination by address book], page 5-24. 3-24 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Searching for Emergency facilities Voice Command Searching your Home 1. Press the key. remote controller. 1. Press the key. 1. Press the key on the steering wheel 2. Press the button. 2. After the beep sound, say a command.
"Find emergency <Category>"
5-23.
[Find emergency <Category>], page 3. Select the desired facility category. 4. Select the desired facility. The corresponding position will be dis-
played on the map. 2. Press the button. The Home position will be displayed on the map. INFORMATION If the Home address is not registered, then the
button will not be displayed.
[Registering home address], page 3-48. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Go home"
[Go home], page 5-25. NAVIGATION SYSTEM 3-25 PART 3 NAVIGATION SYSTEM Searching favorite places 1. Press the key. Searching from MAP Position the scroll mark at the destination by scrolling the map on the map screen. 2. Select the desired button from ~ . Searching POI by local POI list 1. Press the button on the map screen. 2. Press the button. 3. Press the button. 4. Select the desired POI menu. The corresponding position will be dis-
played on the map. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Find nearest <POI name>"
[Find nearest <POI name>], page 5-21. The corresponding position will be dis-
played on the map. INFORMATION If the address of the Favorite place is not regis-
tered, then the ~ buttons without registered addresses will be disabled.
[Registering favorite place], page 3-49. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Destination by memory point <1 to 5>"
[Destination by memory point <1 to 5>], page 5-25. 3-26 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Operating after searching a destination Voice Command 1. Press the key on the steering wheel Adding to address book :
Saves the position in the address book. remote controller.
[Registering new address in address book], 2. After the beep sound, say a command. page 3-43.
"Start guidance"
(Sets the position of the scroll mark as the destination and begins route guidance.) Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Store Marked Location to <text tag>"
Changing destination position :
Changes the position of the destination by scrolling the map.
[Scrolling map], page 3-11. Setting as Destination / waypoint :
Sets the position as the destination or way-
point. NAVIGATION SYSTEM 3-27 PART 3 NAVIGATION SYSTEM Operating after setting a destination Voice Command Route guidance screen 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Time to destination"
"Distance to destination"
Starting Route Guidance Press the button. Route Guid-
ance will start. Route simulation If the button is pressed and held for over 0.8 second, then the route simulation will start. If the key on the control panel is pressed during route simulation, then route simulation will be terminated. 3-28 NAVIGATION SYSTEM Symbol guidance mode : if the button is pressed, then the following route guid-
ance screen will be displayed. Turn-List mode : if the button is pressed, then the following route guidance screen will be displayed. I I N A V G A T O N S Y S T E M Selecting other route 1. Press the button. Highway mode : if the button is pressed, then the following route guidance screen will be displayed. Highway junction mode : this route guid-
ance screen is automatically displayed dur-
ing guidance at highway junctions. Once guidance at a highway junction is complete, this screen will automatically dis-
appear and the previous guidance screen will be restored. 2. Other routes can be selected by pressing the or buttons. Intersection zoom mode : this route guidance screen is automatically displayed during guidance at an intersection. Once guidance at the intersection is com-
plete, the screen will automatically disappear and the previous guidance screen will be restored. NAVIGATION SYSTEM 3-29 PART 3 NAVIGATION SYSTEM Route guidance Route menu screen and functions D Cancel Route: deletes destination, way-
points and terminates route guidance.
[Finishing route guidance], page 3-30 . Finishing route guidance (Delete Destination) E Route Overview: displays the entire route 1. Press the key. and route detailed.
[Route overview], page 3-31 . 2. Press the button. F Route Option: the route option can be changed.
[Changing Route option], page 3-32 . G Edit Waypoint: waypoints can be added/
deleted and the order can be changed.
[Editing waypoints], page 3-32 . H Detour : searches detour routes.
[Setting detour distance], page 3-35 . I Avoid Streets: searches routes which avoid 3. Press the button. the selected streets.
[Setting avoid streets on route], page 3-35. The destination and waypoints are deleted and the route guidance is terminated.
[Finishing route guidance], page 3-30 . Press the key on the control panel. The ROUTE menu screen will be displayed. D G E H F I 3-30 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Voice Command Route overview (View Entire Route) 1. Press the key on the steering wheel remote controller. 1. Press the key. 2. After the beep sound, say a command.
"Cancel route"
(Terminates route guidance and deletes the set destination and waypoints.) 2. Press the button. 4. The detailed route information can be viewed 3. Press the button. INFORMATION If the button is pressed, route guidance screen is displayed. NAVIGATION SYSTEM 3-31 PART 3 NAVIGATION SYSTEM Changing Route option Voice Command Editing waypoints 1. Press the key. remote controller. 1. Press the key on the steering wheel 2. Press the button. 2. After the beep sound, say a command.
"Replan recommended route"
"Replan shortest route"
3. Press the button for the desired route guid-
ance method. Guidance will be restarted after recalculat-
ing the route with the selected guidance method. 3-32 NAVIGATION SYSTEM Adding waypoints There are 2 ways to add waypoints - (a) searching for POI nearest to the route, (b) using advanced search. 1. Press the key. 2. Press the button. 3. Press the but-
ton. I I N A V G A T O N S Y S T E M
(a) Searching POI lists near route 6. Select the desired sub category from list. 8. Press the button. 4. Press the button. 5. Select the desired category. 7. Select the desired POI from the list. The corresponding position will be dis-
played on the map. 9. Press the button to complete. Guidance will restart after recalculating the route. NAVIGATION SYSTEM 3-33 PART 3 NAVIGATION SYSTEM
(b) Using advanced Search The method for searching waypoints through the button is the same method as searching destination.
[Searching a Destination], page 3-13. Re-ordering waypoints 1. Press the key. 2. Press the button. 4. Press the button. 5. After deleting, press the button to complete. Guidance will be restart after recalculating the route. 3. Select the desired waypoint and use the
, buttons to change the order. 4. Once re-ordering is complete, press the
button to complete. Guidance will restart after recalculating the route. Deleting waypoints 1. Press the key. 2. Press the button. 3. Select the waypoint and press the button. 3-34 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Setting detour distance Setting avoid streets on route 1. Press the key. 1. Press the key. 2. Press the button. 2. Press the button. 3. Select the desired streets to avoid( avoid, allow) and press the button to complete. Guidance will restarted after recalculating the route to avoid the selected streets. 3. Select the desired detour range. Guidance will restart after recalculating the detour route. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Detour <1 or 2 or 5 or 10> miles"
"Detour <1 or 2 or 5 or 10> kilometers"
NAVIGATION SYSTEM 3-35 PART 3 NAVIGATION SYSTEM Setup and Information Setup menu screen and functions D F H J E G I I Help button : the help contents can be viewed.
[Help], page 3-54 . J Traffic Setup : sets to display traffic infor-
mation on map, or to provide upcoming traffic information voice guidance, and or to display the detour route popup show-
ing upcoming traffic information. D Main button : changes to the input key-
board type, voice command feedback ON/
OFF settings and system initialization can be made.
[Main setting], page 3-36 . Press the key on the control panel to display the setup menu screen. E Vo i c e S e t u p b u t t o n : a d j u s t s t h e Navigation guidance volume.
[Voice guidance volume setting], page 3-51. F Navigation button : navigation related set-
tings can be set.
[Navigation setting], page 3-38 . G Clock Setup button H My Places button : the Address book, Home address, Favorite places, Previous destination can be edited.
[My places setting], page 3-43 . 3-36 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Main setting 1. Press the key. 2. Press the button. 2. Press the desired language. 3. Select the desired changes and press the
button to complete. Setting keyboard for inputting letter Press the desired keyboard type button. The selection will be highlighted. System information and update 1. Press the button. 3. Press the button to complete. Setting voice command feedback ON/OFF Press the desired setting button. Setting Language 1. Press the button. Initializing system 1. Press the button. 2. Press the menu desired for initialization. 3. Press the butto NAVIGATION SYSTEM 3-37 PART 3 NAVIGATION SYSTEM Navigation setting Registering avoid area 1. Press the key. 1. Press the button. 2. Press the button. 4. Set the end position of the avoid area and press the button. 2. Press the button. 3. Select the desired changes and press the
button to complete. Setting units (mile/ km) Select the desired distance unit. Setting arrival time and distance display Select the desired setting button. 3. Set the start position of the avoid area and press the button. 3-38 NAVIGATION SYSTEM 5. Press the button to complete. I I N A V G A T O N S Y S T E M 6. If the Avoid area needs to be renamed, press the button. 8. Each time the button is pressed, the
)or function will switch between avoid (
allow( ). 9. Press the button to complete the set-
ting. 7. Rename the Avoid area and Press the button to complete. NAVIGATION SYSTEM 3-39 PART 3 NAVIGATION SYSTEM Editing avoid area 1. Press the button. 2. Press the button. 4. If the Avoid area needs to be renamed, press the button. 6. Each time the button is pressed, the
)or function will switch between avoid(
allow( ). 7. Press the button once editing is complete. 5. Rename the Avoid area and press the
button to complete. 3. Select the Avoid area button to edit. 3-40 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Deleting avoid area 1. Press the button. Deleting all avoid areas 1. Press the button. 4. Press the button. 2. Press the button. 2 . Press the button. 5. Press the button. 3. Select the button to delete. 3. Press the button. NAVIGATION SYSTEM 3-41 PART 3 NAVIGATION SYSTEM Setting Q.POI icons 1. Press the button. Setting estimate travel time 1. Press the button. 4. Select the desired sub category. 2. Press the or button on the Residential, Main street, and Freeway con-
trols to adjust the speed. Press the speeds to the default settings. button to set the 5. Press the button to complete. INFORMATION Q.POI stands for Quick POI and refers to the function which turns POI icon display on or off on the map. 3. Press the button to complete the set-
ting. 2. Select the desired menu. 3. Select the desired category. 3-42 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M My places setting 3. Press the button.
(b) by registering in the address book Registering new address in address book There are 3 ways to register a new address in the address book - (a) by DEST menu, (b) by registering address in address book, (c) from map scroll.
(a) by DEST menu 1. Press the key. 2. Press the button. 4. Press the desired address book (user) but-
1. Press the key. ton. 2. Search through the desired method. The search process is the same as the meth-
od for destination search.
[Searching a destination], page 3-13. 3. Press the button. 5. Input the name and telephone information and press the button to complete.
[Editing an address of address book], page 3-45. 4. Press the desired address book (user) but-
ton. NAVIGATION SYSTEM 3-43 PART 3 NAVIGATION SYSTEM 7. Input the name and telephone information and press the button to complete.
[Editing an address of address book], page 3-45.
(c) from map scroll 5. Press the button. 1. In the map screen, scroll the map to the 3. Press the desired address book (user) but-
desired position. ton. 4. Input the name and telephone information and press the button to complete.
[Editing an address of address book], page 3-45. 6. Press the button to search the address. 2. Press the button.
[Searching an address], page 3-13. INFORMATION Press the button to input the address of the current position. 3-44 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Editing an address of address book 1. Press the key. 2. Press the button. 5. Select the desired address to edit. 7. Input the address name and press the
button to complete. 3. Press the button. 6. Press the button to input the address name. 4. Select the desired address book (user) but-
ton . 8. Press the button to search the address. The process is the same as the method for searching an address.
[Searching an Address] , page 3-13. INFORMATION Press the button to input the address of the current position. NAVIGATION SYSTEM 3-45 PART 3 NAVIGATION SYSTEM 9. Press the button to input the Deleting an address of address book phone number. 1. Press the key. 2. Press the button. 10. Input the phone number and press the
button to complete. 5. Select the desired address button to delete. 3. Press the button. 6. Press the button. 11. Press the button to complete. 3-46 NAVIGATION SYSTEM 4. Select the desired address book (user) but-
ton. I I N A V G A T O N S Y S T E M Deleting an address book 1. Press the key. 2. Press the button. 7. Press the button. 4. Press the button. 3. Press the button. 5. Press the button. 4. Press the desired address book (user) but-
ton. NAVIGATION SYSTEM 3-47 PART 3 NAVIGATION SYSTEM Registering home address INFORMATION Deleting home address 1. Press the key. Press the button to reg-
ister the current position as Home. 1. Press the key. 2. Press the button. 5. Search the address. 2. Press the button. The process is the same method as search-
ing an address.
[Searching an Address], page 3-13. 3. Press the button. 3. Press the button. 6. Press the button to complete. 4. Press the button. 4. Press the button. 3-48 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Registering favorite place 1. Press the key. 2. Press the button. 5. Press the button. 5. Press the button. INFORMATION Press the button to reg-
ister the current position as a Favorite place. 3. Press the button. 6. Search the address. The process is the same as the method for searching an address.
[Searching an Address], page 3-13. 4. Press the number of the Favorite Place to register. NAVIGATION SYSTEM 3-49 PART 3 NAVIGATION SYSTEM Deleting favorite place 1. Press the key. 2. Press the button. 7. Press the button to complete. 5. Press the button. 3. Press the button. 6. Press the button. 4. Select the desired favorite place button to delete. 3-50 NAVIGATION SYSTEM I I N A V G A T O N S Y S T E M Voice guidance volume setting 1. Press the key. 2. Press the button. Adaptive volume control ON/OFF Press the desired setting button. INFORMATION Adaptive Volume Control If the speed of the vehicle is over approxi-
mately 60 mi/h (100km/h), the volume level can be increased one level higher than the current level. If the speed of the vehicle falls under 60 mi/h (100km/h), the volume level will return to its original level. Voice guidance volume control Set the desired volume level by using the buttons and press the or button to verify the volume level. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command.
"Voice Guidance Louder"
"Voice Guidance Softer"
Press the button when voice guid-
ance is unnecessary. Voice guidance can be turned back on by pressing the buttons or press-
ing the button. or Voice Command 1. Press the key on the steering Wheel remote controller. 2. After the beep sound, say a command.
"Voice Guidance On"
"Voice Guidance Of"
NAVIGATION SYSTEM 3-51 PART 3 NAVIGATION SYSTEM Traffic Setup Traffic Information INFORMATION 1. Press the key. 2. Press the button. 3. Select the desired changes and press the
button.
(a) Viewing Traffic Information map up until the scale is ~4mile. Traffic information will be shown on the Displays the traffic information around vehi-
cle for up to a radius of 50 miles.
(Information exceeding 50 miles will not be displayed) The above list can be sorted by either Distance (Default) or Category. 1. When the Traffic option is active, press the button on the Map screen. INFORMATION Traffic Flow INFORMATION
Display Traffic and Flow data on Map : select whether to display traffic information on the map.
Voice Prompt for traffic and flow warning :
select whether to provide voice guidance in front of Traffic Information. (On route -
3mile) Display Detour pop-up message : select whether to display Detour pop up in front of Traffic Information. (On route - 3mile) 3-52 NAVIGATION SYSTEM Normal, Free Flowing (46 mph ~) Moderate Congestion (26 ~ 45 mph) Heavy Traffic, Stop and Go (0 ~ 25 mph) Road Construction Accident Congestion/Slow Traffic Incient Hazardous Road Conditions Travel Information 2. Select the desired
button. I I N A V G A T O N S Y S T E M 3. The user can check points of accidents and traffic details.
(b) Changing Traffic Category 2. After selecting the desired menu among the six menus, press the button to save. Once returning to the previous List screen, the corresponding Category list will be shown and maintained until Category information is changed. 1. Press the button. NAVIGATION SYSTEM 3-53 PART 3 NAVIGATION SYSTEM Help 1. Press the key. 4. Press the desired Help menu button. 5. The full content of the help section can be viewed by using the top-down scroll but-
tons. 2. Press the button. 3. Press the button. 3-54 NAVIGATION SYSTEM PART 4 VOICE COMMAND SYSTEM Operating voice command 4-2 Condition for voice command system
4-2 Basic operation for voice command control 4-2 Voice command help 4-3 Setting up the voice command sys-
tem 4-4 Setting voice Prompt ON/OFF 4-4 Speaker adaptation 4-4 Voice command list 4-6 Command list of Help 4-6 Command list of Audio system 4-7 FM/AM Radio 4-7 SIRIUS Radio 4-8 CD 4-9 MP3 4-10 MP3 MP3 4-11 USB Image 4-12 iPod 4-12 Others 4-12 Command list of Navigation system Command list of Phone 4-13
4-14 Map 4-13 Destination 4-15 Route 4-16 Others 4-17 POI Category list 4-18 Searching a destination by voice command 4-19 Find address 4-19 Find nearest POI 4-20 Find nearest <POI name> 4-21 Destination POI by phone number 4-22 Find emergency <Category> 4-23 Destination by address book 4-24 Previous destination 4-24 Previous start point 4-25 Go home 4-25 Destination by memory point
<1 to 5> 4-25 VOICE COMMAND SYSTEM 4-1 I V O C E C O M M A N D S Y S T E M PART 4 VOICE COMMAND SYSTEM Basic operation for voice command control 1. Press the key on the steering wheel remote controller. A voice command window will be dis-
played on the lower side of the screen followed by a "Command please" sys-
tem voice comment. INFORMATION The System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. Operating voice command Condition for voice command system Most of the functions within the AUDIO and Navigation system can be operated by voice. Please follow the following instructions for optimal voice recognition performance. Close all windows and the sunroof. The performance of the voice recognition can be improved if the environment of the car interior is quiet. Press the voice recognition button and say the desired voice command after the sound of the beep. The microphone is positioned above the driver so that voice commands can be said while maintaining a proper pos-
ture. Pronounce the voice commands natu-
rally and clearly as if in a normal conver-
sation. 4-2 VOICE COMMAND SYSTEM 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the desired voice com-
mand (ex : previous destination)
[Voice command list], page 4-6.
[Searching a destination by voice com-
mand], page 4-19. If the exact command is not known, use the
"Help" command to view the commands list in detail. INFORMATION Press the key shortly to input a voice command from among the system voice com-
ments. The system voice instruction comment will immediately terminate. I V O C E C O M M A N D S Y S T E M icon changes into the When the icon with a beep sound, input the desired voice command. keys or the screen will terminate the voice recognition system. Voice command Help 1. Press the key on the Steering wheel remote controller. A voice command window will be dis-
played on the lower side of the screen followed by a "Command please" sys-
tem voice comment. INFORMATION The System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Help". If the proper Help menu is already known, voice commands, such as "des-
tination help" can be inputted directly. 3. The inputted command is fed back to the screen and voice system. If the command was not recognized pro-
perly, say "Back". INFORMATION The commands which can currently be inputted are displayed on the screen in yel-
low. To terminate the voice recognition system, for either say "cancel" or press the over 0.8 second. Be aware that during the operation of the voice recognition system, pressing the hard INFORMATION The "help" command can be used even while voice recognition dialogue is operating. At such time, help instructions appropriate to the state of the dialogue will be provided. 3. Say the name of the desired menu.
(ex : "Destination help") 4. Say the desired voice command. VOICE COMMAND SYSTEM 4-3 PART 4 VOICE COMMAND SYSTEM Setting up the voice command system Setting voice prompt ON/OFF Voice prompt ON : All system prompts are provided. Voice prompt OFF : Most of the system prompts are not provided. Speaker adaptation 1. Press the key on the Steering wheel remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." Or the "Speaker adaptation" command can be directly inputted. 3. Once the icon changes into the icon on the pop-up screen with a beep sound, say
"Voice Prompt on". 1. Press the key on the Steering wheel remote controller. INFORMATION 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." The "voice prompt on" or "voice prompt off" can be directly inputted if the current state is already known. In the Voice Setup Help screen, the commands possible for input within the current mode are displayed. For example, if the Voice prompt is currently in Off state, then the command Voice prompt ON will be displayed on the screen. 4-4 VOICE COMMAND SYSTEM 3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Speaker adaptation". I V O C E C O M M A N D S Y S T E M Reset Speaker adaptation: Returns to previous state prior to applying Speaker adaptation. 1. Press the key on the Steering wheel remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Reset Speaker adaptation". 4. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Yes". 5. Listen and repeat the 20 commands
(approximate) as instructed by the device. VOICE COMMAND SYSTEM 4-5 PART 4 VOICE COMMAND SYSTEM Voice command list Command list of Help The voice commands for this system are divi-
ded into Global commands and Local com-
mands.
Global command () : Commands which operate in all operating modes. Local command () : Commands which operate only when the corresponding mode is operating or when the mode screen to the corresponding mode is dis-
played. Command
Help
Destination Help
Map Help
Radio Help
SIRIUS Help
Disc Help
iPod Help
USB Help
Phone Help Operation Displays the main Help screen. Displays the Destination related command list. Displays the Map related command list. Displays the FM/AM radio related command list. Displays the SIRIUS radio related command list. Displays the DISC mode related command list for the disc inserted in the CDP. Displays the iPod related Command list. Displays the USB related command list. Displays the Phone help screen.
Voice setup Help Displays the Voice prompt settings and speaker-adaptive commands on the screen. 4-6 VOICE COMMAND SYSTEM Command list of Audio system FM/AM Radio Command
Radio
(Radio) AM
(Radio) FM
FM <1 or 2>
AM frequency <530 to 1710>
(ex. AM frequency 1310) FM frequency <87.5 to 107.9>
(ex. FM frequency 99.1) AM Preset <1 to 6>
Seek Up Preset <1 to 6>
FM <1 or 2> Preset <1 to 6>
Preset Down Preset Scan Seek Down Preset Up Scan Plays the most recent frequency for the most recently operated band. Operation Plays the most recent frequency for the corresponding band. Plays the most recent frequency for the corresponding band. In the case of FM, the most recent frequency within the most recently played FM1 or FM2 band is played. Plays the most recent frequency for the corresponding band. Plays the desired AM band frequency. Plays the desired FM band frequency. Plays the desired AM band preset frequency. Plays the desired preset frequency of FM1 or FM2 band. Plays the desired preset frequency for the current band. Searches and plays the next frequency of the current band. Searches and plays the previous frequency of the current band. Plays the next preset frequency of the current band. Plays the previous preset frequency of the current. Scans all frequencies within the current band. Scans the 6 preset frequencies of the current band. VOICE COMMAND SYSTEM 4-7 I V O C E C O M M A N D S Y S T E M PART 4 VOICE COMMAND SYSTEM SIRIUS Radio Command Operation
Plays the last channel within the last band from SIRIUS1, SIRIUS2, and SIRIUS3.
SIRIUS <1 or 2 or 3>
Plays the most recent channel for the corresponding Band. SIRIUS Channel <0 to 223>
Plays the desired SIRIUS band channel. SIRIUS <1 or 2 or 3> Preset <1 to 6>
Plays the desired preset channel for SIRIUS1 or SIRIUS2 or SIRIUS3 band. Channel < 0 to223 >
Plays the desired channel of the current band. Preset <1 to 6>
Channel Up Channel Down Preset Up Preset Down Scan Preset Scan Plays the desired preset channel of the current band. Plays the next channel of the current band. Plays the previous channel of the current band. Plays the next preset channel of the current band. Plays the previous preset channel of the current band. Scans all channels within the current band. Scans all preset channels within the current band. 4-8 VOICE COMMAND SYSTEM CD
DISC
CD
CD track <1 to 665>
Track <1 to 665>
Next track
Previous track
Scan
Repeat track
Random
Normal play
Pause
Play Command Operation Plays the DISC already inserted in the CD Player. If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played. If the DISC inserted in the CD Player is a CD, then CD Mode will start and plays the desired track. Plays the desired track. Plays the next track. Plays the previous track. Scans all tracks on the CD. Repeats the current playing track. Plays the tracks of the CD in random order. Turns off the Scan, Repeat, and Random functions. Pauses the CD. The command will only be enabled when the CD is paused. VOICE COMMAND SYSTEM 4-9 I V O C E C O M M A N D S Y S T E M PART 4 VOICE COMMAND SYSTEM MP3
DISC CD
MP3 Command Operation Plays the DISC already inserted into the CDP. If the DISC inserted in the CDP is either a CD or MP3 DISC, then the CD or MP3 will be played. If the DISC inserted in the CDP is an MP3 DISC, then the MP3 will be played.
Next file Previous file Next folder Plays the next file. Plays the previous file. Plays the first file in the next folder. Previous folder Plays the first file in the previous folder. Scan Folder Scan Repeat File Repeat Folder Random Random Folder Normal play Pause Play Scans all files within the MP3 DISC. Plays all songs in the folder in which the current playing file is located for 10 seconds each. Repeats the current playing file. Repeats all tracks within the current playing folder. Plays all files within the MP3 DISC in random order. Plays all files within the current playing folder in random order. Turns off the Scan, Repeat, and Random functions. Pauses the MP3 DISC. The command will only be enabled when the MP3 DISC is paused. 4-10 VOICE COMMAND SYSTEM I V O C E C O M M A N D S Y S T E M USB MP3 Command USB Next file Previous file Next folder If the USB has been connected to the device, plays the MP3 files within the USB. Operation Plays the next file. Plays the previous file. Plays the first chapter of the next folder. Previous folder Plays the first chapter of the previous folder. Scan Folder Scan Repeat File Repeat Folder Random Random Folder Normal play Pause Play Scans all files within the USB. Plays all songs in the folder in which the current playing file is located for 10 seconds each. Repeats the current playing file. Repeats all songs within the current playing folder. Plays all files within the USB in random order. Plays all files within the current playing folder in random order. Turns off the Scan, Repeat, and Random functions. Pauses the USB. The command will only be enabled when the USB is paused.
VOICE COMMAND SYSTEM 4-11 PART 4 VOICE COMMAND SYSTEM USB Image Command
USB
Next Image
Previous Image
Next folder
Previous folder iPod
Command iPod Next song Previous song Repeat song Random Random Album Normal play
Pause
Play 4-12 VOICE COMMAND SYSTEM If the USB IMAGE has been connected to the device, plays the image files within the USB. Operation Moves to the next Image. Moves to the previous Image. Moves to the next folder. Moves to the previous folder. Plays the songs within the iPod if the iPod has been connected to the device. Operation Plays the next song. Plays the previous song. Repeats the current playing song. Plays all songs within the iPod in random order. Plays all songs within the current playing album in random order. Turns off the Repeat and Random functions. Pauses the iPod. The command will only be enabled when the iPod is paused. I V O C E C O M M A N D S Y S T E M Others Command
Line in Audio on Audio off Command list of Phone Operation Plays the unit connected with the AUX terminal. Turns on the Audio/Video. Turns off the Audio/Video. Command Operation
Call Name
Dial Number
Redial
Recent Calls Makes the call to the name. makes the callto the number. The recently called number is redialed. The user can select a number from the outgoing, incoming, and missed calls. VOICE COMMAND SYSTEM 4-13 PART 4 VOICE COMMAND SYSTEM Command list of navigation system Navigation commands will operate only agreeing to the terms and conditions for the Navigation system. Operation Displays the current position of the vehicle. Decreases the map zoom by one level. Increases the map zoom by one level. Displays the map screen in the maximum zoom level. Displays the map screen in the minimum zoom level. Displays the map in the zoom level selected from the 14 levels. Displays the map in the corresponding zoom. Map Command
Map Current location
Zoom In
Zoom Out
Zoom minimum
Zoom maximum
Zoom level <1 to 14>
Zoom <scale factor>
150 feet / 50 meters 300 feet /100 meters 700 feet / 200 meters 0.25 miles / 400 meters 0.5 miles / 800 meters 1 mile / 1.6 kilometers 2 miles / 3.2 kilometers 4 miles / 6.4 kilometers 8 miles / 12 kilometers 16 miles / 25 kilometers 32 miles / 50 kilometers 64 miles / 100 kilometers 130 miles / 200 kilometers 250 miles / 400 kilometers
(ex.Zoom 0.25 miles, zoom 400 meters) 4-14 VOICE COMMAND SYSTEM Command North up Heading up Show <POI name> (ex. Show ATM) Hide <POI name> (ex. Hide ATM) Hide all Daylight mode Night mode Auto mode
Destination Command
Find address
Find nearest POI
Find nearest <POI name>
Displays the map in North Up mode. Operation Displays the map in Heading Up mode. Displays the selected POI categories. Hides the selected POI categories. Hides all POI categories.
[POI Category list], page 4-18.
[POI Category list], page 4-18. Converts the map display into daylight mode. Converts the map display into night mode. Converts the map display is between daylight/night modes automatically. Operation Sets the destination through address search for route guidance. Sets a POI near the current position as the destination for route guidance through POI category search. Sets a POI near the current position as the destination by directly inputting the POI name for route guidance.
[POI Category list], page 4-18. I V O C E C O M M A N D S Y S T E M
Destination POI by phone number Sets the destination by searching the phone number of the facility.
Find Emergency <Category>
(ex. Find Emergency Hospital)
Destination by address book Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. Sets one of the list of previously registered addresses in the address book for the user as the destination. VOICE COMMAND SYSTEM 4-15 PART 4 VOICE COMMAND SYSTEM Command
Previous destination
Previous start point
Go home Operation Sets one of the previous destination as the current destination. Sets the previous start point as the current destination. Sets the previously registered home address as the destination for route guidance.
Destination by memory point <1 to 5>
Sets a previously registered memory point as the destination for route guidance Route Command Operation
Cancel route Deletes the designated destination and terminates the route guidance.
Repeat voice guidance Repeats the route guidance.
Detour <1 or 2 or 5 or 10> miles Searches detour routes within a <1|2|5|10> mile radius.
Detour <1 or 2 or 5 or 10> kilometers Searches detour routes within a <1|2|5|10> kilometer radius.
Replan recommended route Recalculates the route with the recommended route.
Replan shortest route
Distance to destination
Time to destination
View route
Start guidance 4-16 VOICE COMMAND SYSTEM Recalculates the route with the shortest route. Reports the remaining distance until destination by voice. Reports the remaining time until destination by voice. If the destination has been set, displays the whole route screen until the destination. Sets the scroll mark displayed on the map as the destination and starts route guidance. I V O C E C O M M A N D S Y S T E M Others Command
Voice guidance on
Voice guidance off
Voice guidance louder
Voice guidance softer Operation Turns the Voice Guidance On. Turns the Voice Guidance Off. Increases the Voice Guidance volume by 1 level. Decrease the Voice Guidance volume by 1 level.
Store marked location to <text tag>
(ex. Store marked location to user 1) Registers the selected location into the selected Address book. VOICE COMMAND SYSTEM 4-17 PART 4 VOICE COMMAND SYSTEM
POI Category list All restaurants Fast Food restaurant American restaurant French restaurant Italian restaurant Continental restaurant Mexican restaurant Japanese restaurant Chinese restaurant Korean restaurant Vegetarian Food restaurant Seafood restaurant Latin American restaurant Asian restaurant African restaurant Coffee Shop Other restaurants All Automotive Gas Station Parking Auto service Road Assistance KIA Dealership Automobile Dealership Auto Parts Rest Area 4-18 VOICE COMMAND SYSTEM Car Wash Motorcycle Dealership All Travel Airport Hotel Tourist Information Travel Agent Tourist Attraction City Cnter Rental Car Agency Campground Ferry Terminal Bus Station Local Transit Train Station All Shopping Department Store Convenience Store Shopping Center Music Store Grocery Store Bookstore Electronics Store Hardware Store Gifts shop Sporting Goods store Home Specialty Store Clothing shop Shoe Store Pharmacy All Recreation Amusement Park Museum Cinema Sports Activities Sports Complex Golf Course Winery Video & Game Rental Ski Resort Recreation Area Other Recreation All Financial Service Bank ATM Check Cashing Service Money Transfer Business Facility All Community Police Station Post Office Library Court House Fire Department Convention Center City Hall Civic Center School Government Offices Waste & Sanitary Utilities All Services Hospital Dentist Photography Tax Service Medical Service Attorney Funeral Director Hair & Beauty Cleaning & Laundry Social Service Physician Communication services Tailor & Alteration Mover services I V O C E C O M M A N D S Y S T E M Searching a destination by voice command
Find address Sets the destination through address search for route guidance. 1. Press the key on the Steering wheel 4. Say the state name. 6. Say the street name. remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Find address". 3. Say "Change state" to change the state. 5. Say the city name. 7. Say the House number. Here, the range which can be inputted will be displayed. 8. Say "Start guidance" if guidance to the selected position is desired, or say
"Show map" to verify the location of the selected position on the map. VOICE COMMAND SYSTEM 4-19 PART 4 VOICE COMMAND SYSTEM INFORMATION Spell recognition Pick-List(n-best list) Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search. 1. Press the key on the Steering wheel remote controller. It is possible to search the state, city, street names through the text line inputted by the user. To enter spell search mode, say the "Spell state, city, street names" command as displayed on the screen. Text lines can be inputted continuously. If there are more than one voice result, then a pick-list which can be selected by the user will be displayed. There may be more than one list page. The desired page can be viewed by using commands such as "next page" or "previous page". Here, the "Line + number" voice command can be used to select the desired result, such as "Line one". Pressing the desired result is not supported. Also, selectable areas will be highlighted in yellow, allowing the user to easily see which results can be selected. 4-20 VOICE COMMAND SYSTEM 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "find nearest POI". 3. Select the desired main category. I V O C E C O M M A N D S Y S T E M 4. Select the desired sub category. 6. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map. 5. Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1". Find nearest <POI name>
Sets a POI near the current position as the destination by directly inputting the POI name for route guidance. 1. Press the remote controller. key on the Steering wheel 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Find nearest Parking". 3. Select the desired POI from the list and say the line number for the correspond-
ing menu. e.g) "Line 2". VOICE COMMAND SYSTEM 4-21 PART 4 VOICE COMMAND SYSTEM Destination POI by phone number INFORMATION Continuous recognition of phone numbers is possible, and the recognized result will be displayed in block units. To correct a block unit, say "correct". To delete the entire result, say "delete". To have the input read back, say
"repeat". Sets the destination by searching the phone number of the facility. 1. Press the key on the Steering wheel remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination POI by Phone number". 4. Say "Start guidance" if guidance to the selected position is desired, or say
"Show map" to verify the location of the selected position on the map. 4. Say "Show list" to view the resulting search list. 3. Input the 10 numbers for the phone number. 4-22 VOICE COMMAND SYSTEM I V O C E C O M M A N D S Y S T E M 5. Select the desired location from the list and say the line command. Find emergency <Category> :
Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. 1. Press the key on the Steering wheel remote controller. 6. Say "Start guidance" if guidance to the selected position is desired, or say
"Show map" to verify the location of the selected position on the map. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the voice command. Ex)Find emergency hospital 4. Say "Start guidance" if guidance to the selected position is desired, or say
"Show map" to verify the location of the selected position on the map. 3. Select the desired location from the list and say the line command. VOICE COMMAND SYSTEM 4-23 PART 4 VOICE COMMAND SYSTEM Previous destination Sets one of the previous destination as the current destination. 1. Press the key on the Steering wheel remote controller. 4. Select the desired location from the list and say the line command. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous destination". 5. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map. 3. Select the desired location from the list and say the line command. Destination by address book Sets one of the list of previously registe-
red addresses in the address book for the user as the destination. 1. Press the key on the Steering wheel remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination by address book". 3. Select the desired user name(Address book name). 4-24 VOICE COMMAND SYSTEM I V O C E C O M M A N D S Y S T E M Destination by memory point <1 to 5>
Sets a previously registered memory point as the destination for route guidance. 1. Press the key on the Steering wheel remote controller. 4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map. 3. Say "Start guidance" if guidance to the selected position is desired, or say
"Show map" to verify the location of the selected position on the map. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination by memory point 1". Previous start point Sets the previous start point as the cur-
rent destination. 1. Press the key on the Steering wheel Go home Sets the previously registered home address as the destination for route gui-
dance. remote controller. 1. Press the key on the Steering wheel 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous start point". remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Go home". VOICE COMMAND SYSTEM 4-25 PART 5 BLUETOOTH HANDSFREE PART 5 BLUETOOTH HANDSFREE Before using the Bluetooth Handsfree 5-2 What is Bluetooth? 5-2 Functions supported by Bluetooth Handsfree 5-2 Converting Bluetooth Handsfree mode 5-2 Converting from Audio/Navigation mode to Bluetooth Handsfree mode 5-2 Converting from Bluetooth Handsfree mode to Audio/Navigation mode 5-3 Pairing and connecting a Bluetooth phone 5-4 Pairing a mobile phone 5-4 Deleting a paired phone 5-6 Connecting a mobile phone 5-7 Disconnecting a mobile phone 5-8 Bluetooth Handsfree screen layout 5-9 Bluetooth Handsfree screen and functions 5-9 When there is no mobile phone connected 5-9 When a mobile phone is connected 5-9 When receiving an incoming call 5-10 When already on a call 5-10 When there is a call waiting 5-10 Making a call 5-11 Making a call by dialing a phone number 5-11 Making a call from Speed Dial 5-11 Making a call by redialing 5-12 Answering a call 5-13 Answering an incoming call 5-13 Rejecting an incoming 5-13 PART 5 BLUETOOTH HANDSFREE Operating menus during a call
5-14 Switching call to the mobile phone 5-14 Activating Call waiting 5-14 Ending a call 5-15 Phone Book 5-16 Making a call from the Phone book 5-16 Searching the Phone Book 5-17 Searching by name 5-17 Searching by number 5-18 Call History List 5-19 Making a call from Call history 5-19 Sorting call history 5-19 Phone Music 5-21 Before playing Phone Music 5-21 Starting Phone Music 5-21 Phone Music screen layout 5-22 Selecting Phone Music files 5-23 Bluetooth settings 5-24 Pairing and connecting a mobile phone 5-24 Setting mobile phone auto connect priority 5-24 Setting Handsfree volume 5-25 Setting Audio streaming 5-26 Advanced settings 5-26 Searching and modifying my device properties 5-27 Changing passkey 5-28 Deleting all paired phones 5-28 Initializing Bluetooth handsfree 5-29 Important information 5-30 About pairing mobile phones 5-30 About making/answering phone calls 5-31 About Bluetooth device environment 5-31 B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-1 PART 5 BLUETOOTH HANDSFREE Before using the Bluetooth Handsfree Functions supported by Bluetooth Handsfree Converting Bluetooth Handsfree mode What is Bluetooth ?
Bluetooth allows wireless transmission of information between PC, mobile phones, head-
sets, PDAs, printers and other devices within close ranges by using 2.45Ghz frequency short-
distance wireless telecommunication technolo-
gies. Within this vehicle, users can make hands-
free calls, transmit mobile phone data, and play audio streaming files by connecting a mobile phone with the system. Pairing mobile phones (Up to 5 phones) Connecting/disconnecting mobile phones Making/Answering phone calls Downloading a Phone Book Downloading a Call history list Playing music saved in a Bluetooth phone in the vehicle Some functions may not be supported in some mobile phone. Converting from Audio/Navigation mode to Bluetooth Handsfree mode 1. While in Audio mode or Navigation mode, key on press the key or the the steering wheel. Bluetooth is a trademark owned by Bluetooth SIG, Inc. 5-2 BLUETOOTH HANDSFREE Converting from Bluetooth Handsfree mode to Audio/
Navigation mode INFORMATION Most of the functions of the Audio or SETUP modes are not suppor ted while on a Bluetooth Handsfree call. The call volume and Navigation (MAP VOICE, DEST, ROUTE) screens can be operated. 2. The system will change to Bluetooth Handsfree mode and display the PHONE screen. 1. While in Bluetooth Handsfree mode, press an Audio/Navigation mode key, such as
or . 3. The following screen will become displayed if no mobile phone has been connected. 2. The corresponding mode will be displayed. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-3 PART 5 BLUETOOTH HANDSFREE Pairing and connecting a Bluetooth phone Pairing a mobile phone 3. The list of currently paired phones will be displayed. Press the button to pair a new mobile phone. INFORMATION For safety reasons, pairing a Bluetooth phone is not possible when the vehicle is in motion. Park the vehicle in a safe location to pair a new phone. It is possible to pair up to five mobile phones. In order to pair a new phone when there are already five mobile phones paired, you must first delete one of the previously paired phones. 4. From the Bluetooth device list within the mobile phone, add the car handsfree. The default name of the car system is SPORTAGE. Fo r m o re i n fo r m a t i o n o n re gi s te r i n g Bluetooth devices from the mobile phone, please refer to the mobile phone user's manual. INFORMATION While conducting a Bluetooth device search from the mobile phone, operating to another screen will prevent the car hands-
free from being found in the mobile phone. Always conduct searches for Bluetooth devices with the Search Bluetooth device screen displayed. 1. Press the button on the PHONE screen. 2. Press the button on the Settings screen. 5-4 BLUETOOTH HANDSFREE 5. When pairing the car handsfree from the mobile phone, a passkey input window will become displayed on the mobile phone screen. Input the passkey set within the car system into the mobile phone input win-
dow. (The factory state passkey is 0000.) As shown in the figure, once the passkey becomes successfully inputted, the Bluetooth connection between the car sys-
tem and mobile phone will start. 6. Once Bluetooth connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth handsfree functions will operate. INFORMATION Some functions may not be supported due to limited Bluetooth compatibilit y between the car system and mobile phone. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-5 PART 5 BLUETOOTH HANDSFREE Deleting a paired phone CAUTION!
A mobile phone cannot be deleted if it is cur-
rently connected to the car system. To delete the phone, first disconnect the mobile phone and try again. 1. Press the button on the PHONE screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to delete from the list and press the button. 2. Press the button on the Settings 4. A pop-up asking whether you wish to screen. delete the paired phone will be displayed. Press the phone and the button to cancel. button to delete the paired 5-6 BLUETOOTH HANDSFREE Connecting a mobile phone 1. Press the button on the PHONE screen. 2. Press the button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to connect from the list and press the
button. INFORMATION When there are no paired phones, pair the mobile phone through [Settings>Pairings>
Add to]. For more information on pairing mobile phones, refer to the user's manual
[Pairing and Connecting a Bluetooth phone >
Pairing a mobile phone]. 4. The Bluetooth connection between the car system and mobile phone will start. 5. Once Bluetooth connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth handsfree functions will operate. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-7 PART 5 BLUETOOTH HANDSFREE Disconnecting a mobile phone 6. If the connection between the mobile phone and Bluetooth fails, the following pop-up will be displayed. If problems occur while connecting Bluetooth, check for the following conditions. Whether the mobile phone you wish to connect is in the vicinity of the car system Whether the power of the mobile phone Bluetooth has been turned off Whether the mobile phone Bluetooth has been set to hidden state Whether there are Bluetooth compatibility issues between the car system and another mobile phone 5-8 BLUETOOTH HANDSFREE 1. Press the button on the PHONE screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to disconnect from the list and press the
button. 2. Press the button on the Settings screen. 4. A pop-up asking whether you wish to dis-
connect the mobile phone will be dis-
played. Press the button to disconnect the mobile phone and the button to cancel. Bluetooth Handsfree screen layout Bluetooth Handsfree screen and functions When there is no mobile phone connected When a mobile phone is connected
Settings : The user can set desired settings for the Bluetooth handsfree, such as pair/
delete mobile phone, connect/ disconnect mobile phone, set call volume, change device name and change passkey.
Phone battery charge status : Displays the battery charge status of the connected mobile phone. The battery charge status may not be displayed in some mobile phones.
Signal strength : Displays the mobile phone signal strength. The signal strength may not be displayed in some mobile phones.
Bluetooth connection state : Becomes displayed when a Bluetooth phone has been connected with the car system.
Name of connected mobile phone :
Displays the name of the connected mobile phone.
Phone number input window : Displays the inputted phone number.
Dial : Input the phone number through
the dial pad.
SEND : If a number has not been entered the phone number input window, pres-
sing the send button displays the call his-
tory list screen.
Del : Deletes the inputted number one digit at a time.
END : If a number has been inputted, then erases the entire number.
Contacts : Displays the phone book screen. The user can search previously saved phone numbers. The phone contact list may not be displayed in some mobile phones. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-9 PART 5 BLUETOOTH HANDSFREE
Busy icon : When already on a call, displays an icon shaped like a receiver.
Name of incoming caller : Displays the name of incoming caller. The name of the incoming caller will not be displayed if the caller's phone number has not been pre-
viously registered in the phone book.
Number of incoming caller : Displays the number of the incoming caller.
Call state : Displays the call state, such as talk time, phone connection, and end time.
END : Ends the call.
Private : When talking on the car hands-
free, use this function to switch the call to the mobile phone.
Mute : Use this function to mute the outgoing volume. Pressing the button will display the at the top right side of the screen and the caller will not be able to hear the conversation taking place in the car. Press the button again to release the Mute function. When there is a call waiting
Switch : Use this button to switch between callers when there are calls on call waiting.
END : Use this button to end the calls with all callers. When receiving an incoming call
Accept : Accepts the incoming call.
Reject : Rejects the incoming call. When already on a call
5-10 BLUETOOTH HANDSFREE Making a call Making a call by dialing a phone number 1. Use the number pad on the right side of the PHONE screen to input the number you wish to call. 2. Press the button or the key on the steering wheel to make the call. INFORMATION Making a call from Speed Dial button to delete To modify, press the the inputted number one digit at a time. Press the button or the steering wheel to cancel the call. key on the 1. Use the number pad on the right side of the PHONE screen to input a speed dial num-
ber. INFORMATION Only speed dial numbers already stored on the mobile phone can be used for speed dial calls. Up to 2-digit speed dial numbers are suppor-
ted. BLUETOOTH HANDSFREE 5-11 B L U E T O O T H H A N D S F R E E PART 5 BLUETOOTH HANDSFREE Making a call by redialing 2. Press the button or the key on the steering wheel to make the call. INFORMATION For 2-digit speed dial numbers, press and hold the 2nd digit to make a call to the speed dial number. 1. Press and hold (over 0.8 second) the button on the PHONE screen or the key on the steering wheel. INFORMATION Redialing is not possible when there is no call history or the call history list is being down-
loaded from the mobile phone. When there is no call history list, the button will be inactive. 2. The recently called number is redialed. INFORMATION It is not possible to display the AUDIO mode and Settings screen when on a phone call. Only the call volume and Navigation (MAP, DEST, ROUTE) screens can be operated. 5-12 BLUETOOTH HANDSFREE Answering a call Answering an incoming call Rejecting an incoming INFORMATION Upon receiving a call, the [Reject] function may not be supported in some mobile phones. 1. The following screen will be displayed when you receive an incoming call. 1. The following screen will be displayed when you receive an incoming call. 2. To answer the incoming call, press the key on the
button or the steering wheel. 2. To reject the incoming call, press the
button or the key on the stee-
ring wheel. The incoming call will be rejec-
ted. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-13 PART 5 BLUETOOTH HANDSFREE Operating menus during a call Activating Call waiting Switching call to the mobile phone 2. As shown, the call will be switched to the mobile phone. INFORMATION If you wish to switch the call to the car hands-
free while talking on the mobile phone, press the button or press and hold
(over 0.8 second) the key on the steering wheel. The call will be switched to the car handsfree. 1. If you wish to switch the call to the mobile phone while talking on the car handsfree, press the button or press and hold
(over 0.8 second) the key on the stee-
ring wheel. 5-14 BLUETOOTH HANDSFREE 1. If another person calls while already on a call, the following screen will be displayed. 2. Press the need screen with button or the key on the steering wheel to receive the incoming call by switching to the new caller. Ending a call 3. To switch again to the other caller, press the key on the
button or the steering wheel. The other call will be received and the previous call will switch back to call waiting. INFORMATION
button or the Press the key on the steering wheel to end the current call and call waiting. 1. To end a call, press the
button or the key on the steering wheel. 2. The call will be ended. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-15 PART 5 BLUETOOTH HANDSFREE Phone Book Making a call from the Phone book INFORMATION The system may begin to slow down when downloading the phone book in some mobile phones. 1. Press the button on the PHONE screen. 2. The phone book list will be displayed. 5-16 BLUETOOTH HANDSFREE Upon connecting a mobile phone, the phone book lists saved in the mobile phone w i l l a u t o m a t i c a l l y b e d o w n l o a d e d
(Maximum 1000 entries). The phone book download function may not be supported in some mobile phones. If you do not wish to automatically down-
load the mobile phone contacts to the vehi-
cle, turn the Contacts Sync setting OFF.
(Phone>Settings>Advanced setup>
Contacts Sync) 3. Select the number you wish to call from the phone book list and press the but-
ton. 4. The call will be made to the selected num-
ber. INFORMATION Searching the Phone Book When there are more than 2 numbers saved in one phone number list, if the list is repea-
tedly selected, the registered phone num-
bers will be displayed sequentially on the list.
The Mobile Phone/Office/Home categories received via the mobile phone may differ from the information actually stored in the mobile phone. Select the phone number you wish to connect by repeatedly selecting the phone number list and press the button to make the call to the selected number. 1. Press the button on the PHONE screen. 3. Phone numbers can be searched by either
or From the two methods, select the search method you wish to use. Searching by name 2. Press the
button on the Contacts screen. B L U E T O O T H H A N D S F R E E 4. Press the button on the Phonebook search screen. BLUETOOTH HANDSFREE 5-17 PART 5 BLUETOOTH HANDSFREE Searching by number 5. Input the name you wish to search and press the button. 6. The search results will be displayed on the screen. 4. Press the Phonebook search screen. button on the 6. The search results will be displayed on the screen. 5. Input the phone number you wish to search and press the button. 5-18 BLUETOOTH HANDSFREE Call History List Making a call from Call history Sorting call history 3. The call will be made to the selected num-
ber. 1. Press the button on the PHONE key on the stee-
screen or press the ring wheel. 2. The call history list will be displayed. Select the number you wish to call from the call history list and press the button. 1. The call history can be displayed by sorting the incoming calls, outgoing calls and missed calls. 2. When pressing the , , or
button, the corresponding call his-
tory list will be displayed. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-19 PART 5 BLUETOOTH HANDSFREE Dialed number Missed number Received number INFORMATION If there are no entries saved in the ,
, or lists, the corresponding button will be inactive. Up to 20 entries can be saved in each list. 5-20 BLUETOOTH HANDSFREE Phone Music Before playing Phone music Music saved in the mobile phone can be played in the car through Bluetooth audio streaming. Phone music can be played only when a Bluetooth phone has been connected. To play phone music, connect the Bluetooth phone to the car system. For more informa-
tion on connecting Bluetooth, please refer to the user's manual [Pairing and Connecting a Bluetooth phone]. If the Bluetooth is disconnected while playing phone music, the music will be dis-
continued. The audio streaming function may not be supported in some mobile phones. Only one function can be used at a time between the Bluetooth handsfree or Phone music function. Starting Phone Music For example, if you convert to the Bluetooth handsfree while playing Phone music, the music will be discontinued. Playing music from the car is not possible when there are no music files stored in the mobile phone. 1. Repeatedly press the key on the front panel or the key on the stee-
ring wheel to enter Phone music mode. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-21 PART 5 BLUETOOTH HANDSFREE Phone music screen layout
Information Bar : displays information for the currently playing song.
File Down button : plays the previous song.
Play/Pause button : Plays/pauses the song.
File Up button : plays the next song. 2. The Phone music screen is displayed. INFORMATION While music saved in the mobile phone will automatically begin playing after converting to the Phone music screen, this music player function may not be supported in some mobile phones. If music does not begin playing even after converting to the Phone music screen, try starting the music directly from the mobile phone. INFORMATION Each press of the key on the front panel will change the function in the order of DISC USB or iPod AUX Phone Music DISC . Each press of the key on the steering wheel will change the audio mode in the order of FM1 FM2 AM SIRIUS1 SIRIUS2 SIRIUS3 DISC USB or iPod AUX Phone Music FM1. It is not possible to enter Phone music mode if the mobile phone is not connected or if the audio streaming setting within Bluetooth handsfree settings has been set to [Disable streaming audio]. For more information on audio streaming setting, please refer to the user's manual
[Bluetooth settings > Setting Audio streaming]. 5-22 BLUETOOTH HANDSFREE Selecting Phone music files 1. Press the
, buttons on the Phone
keys
, music screen or the on the system. The previous or next song will be played each time the button or key is pressed. INFORMATION The file selection function may not be suppor-
ted in some mobile phones. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-23 PART 5 BLUETOOTH HANDSFREE Bluetooth settings Pairing and connecting a mobile phone For more information on pairing and connec-
ting a mobile phone, please refer to [Pairing and Connecting a Bluetooth phone]. Setting mobile phone auto connect priority INFORMATION After turning on the car ignition and the sys-
tem is booted up, the Bluetooth connection between the car system and mobile phone is automatically made. The Bluetooth connection will be conducted in the order of mobile phone priority. The auto connect priority will be supported only for previously paired mobile phones. 5-24 BLUETOOTH HANDSFREE 1. Press the button on the PHONE screen. 3. The paired mobile phone list and the mobile phone connection priority will be displayed. When wishing to change the priority order, select the mobile phone from the list and buttons to change its use the priority. Press the button to save the chan-
ged mobile phone priority.
, 2. Press the button on the Settings screen. Setting Handsfree volume INFORMATION The Bluetooth handsfree volume can be adjusted only when a mobile phone has been connected. The cannot be set if no mobile phone has been connected. 1. Press the button on the PHONE screen.
, 3. Use the buttons to set the desi-
red volume on the Phone volume screen. Press the button to save. 2. Press the button on the Settings screen. INFORMATION While on a call, turning the knob to the left/right or pressing the key on the steering wheel will also adjust the call volume. Set the incoming call volume accordingly. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-25 PART 5 BLUETOOTH HANDSFREE Setting Audio streaming Advanced settings Bluetooth advanced settings can be chan-
ged. Enter advanced settings through the fol-
lowing way. 1. Press the button on the PHONE INFORMATION 3. Streaming audio setting is selected. screen. 2. Press the button on the Settings screen. 5-26 BLUETOOTH HANDSFREE Enable streaming audio: Repeatedly press the
key or the key to enter Phone music mode. Phone music can be played through Bluetooth audio streaming. Disable streaming audio: Even if the key or the key is repeatedly pressed, will not e available Phone music mode. Phone music through Bluetooth audio streaming is not supported. 1. Press the button on the PHONE screen. 2. Press the button on the Settings screen. INFORMATION For safety reasons, operation of Advance setup is not possible when the vehicle is in motion. Please park in a safe place to make changes to Advanced setup. Searching and modifying my device properties 3. The Advance setup screen will be displayed. In Advance setup, the following four settings can be made. 6. Use the key pad to input the Device name you wish to modify. 4. Press the button on the Advance setup screen. 5. Displays the Device information such as the name and address of the car system. To modify the device name, press the
button. 7. After inputting is complete, press the
button to save. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-27 PART 5 BLUETOOTH HANDSFREE Changing passkey INFORMATION The passkey is a 4-digit authentication code used for the Bluetooth connection between the mobile phone and car system. The default passkey is set to 0000. Deleting all paired phones 2. A pop-up asking whether you wish to delete all paired phone will be displayed. Press the button to delete all paired phones or the button to cancel. 3. If button is pressed, all currently pai-
red phones will be deleted. 1. Press the button on the Advance setup screen. 1. Press the button on the Advance setup screen. 2. Once the Change passkey screen is dis-
played, input the desired passkey and press the button. 5-28 BLUETOOTH HANDSFREE Initializing Bluetooth handsfree INFORMATION Upon initializing the Bluetooth handsfree, the entire paired phone list will be deleted and all Bluetooth related settings will be res-
tored to factory state. 3. If is pressed, the Bluetooth handsfree settings will be initialized. 1. Press the button on the Advance setup screen. 2. A pop-up asking whether you wish to initia-
lize the Bluetooth handsfree will be dis-
played. Press the button to initialize the Bluetooth handsfree system and the
button to cancel. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-29 PART 5 BLUETOOTH HANDSFREE Important information About pairing mobile phones Q. A. I cannot search for mobile phones through the car system. What is the cause?
Check to see whether the mobile phone you wish to connect supports Bluetooth function. If your mobile phone supports Bluetooth, check to see that whether the Bluetooth settings in the mobile phone have been set to hidden state or if the Bluetooth power has been turned off. If the device has been set to hidden, release the hidden state and if the Bluetooth power has been turned off, turn the power ON and try searching again. Q. A. What is the difference between pairing a mobile phone and connecting a mobile phone?
Paring id the process of creating a secure communication connection between the mobile phone and the car Bluetooth sys-
tem. Through a two-way passkey between the car system and mobile phones, up to 5 mobile phones can be paired with the car system. The paired mobile phone will remain paired with the car system until the user deletes it manually. In addition, the call history lists and phone number books saved in each mobile phone will also be maintained until the paired phone is deleted. For more information on pairing mobile phones, please refer to the manual
[Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. C o n n e c t i n g a m o b i l e p h o n e t o Bluetooth by selecting the desired mobile phone from the paired phones. Wi t h i n t h e c a r s y s t e m , o n l y o n e 5-30 BLUETOOTH HANDSFREE Bluetooth phone can be connected at one time. For more information, please refer to the manual [Pairing and Connecting a Bluetooth phone > Pairing a mobile phone]. Q. A. What is a Passkey?
A passkey is an authentication code used for two-way communication of the car system and the mobile phone. Only 4-digit numbers can be used as passkeys. Passkeys are registered only once when pairing the phone number for the first time. The factory-set passkey is 0000. About making/answering phone calls About Bluetooth device environment Q. A. Q. A. Q. A. What is the range for Bluetooth wireless connection?
The wireless connection range is within approximately 30 feet. How many mobile phones can be paired?
It is possible to pair up to five phones with the car system. What is the reason why the call quality deteriorates?
First, check to see the signal strength of the mobile phone. The call quality may deteriorate when the signal strength is low. Call quality may also deteriorate if metal objects, such as drink cans, are placed near the mobile phone. Q. A. Q. A. How can I answer a call?
When you receive an incoming call, press the key on the steering wheel or the
button on the PHONE screen to answer. To reject the incoming call, press the key on the steering wheel or the
button on the PHONE screen. What should I do if I am talking on the Handsfree but wish to switch the call to the mobile phone?
To switch the call to the mobile phone, press the button on the PHONE screen or press and hold (over 0.8 second) the key on the steering wheel. If you wish to switch the call back t o t h e c a r h a n d s f r e e , p r e s s t h e
button on the PHONE screen or press and hold (over 0.8 second) the key on the steering wheel. B L U E T O O T H H A N D S F R E E BLUETOOTH HANDSFREE 5-31 PART 5 BLUETOOTH HANDSFREE CAUTION!
Mobile Phone Compatibility Depending on the manufacturer, product and product specification, some mobile phones functions may not be supported or may not operate to specification. Carefully read the cautions listed below.
The occurrence of problems upon using mobile phones may be caused by the mobile phone and not by the Audio /
Navigation unit. Even mobile phones which suppor t Bluetooth function may not operate pro-
perly if the mobile phone connection has-
been locked. Release the connection lock and try connecting the mobile phone with the system again. 5-32 BLUETOOTH HANDSFREE The Mobile phone battery icon and signal strength icon may not be properly dis-
played depending on the type of mobile phone. Call waiting is supported only when connected mobile phones support this fea-
ture. The call waiting pop-up may not be displayed in some mobile phones. Audio streaming mode will operate only when a Bluetooth phone has been connec-
ted. Connec ting or disconnec ting a Bluetooth phone while audio streaming is operating will stop music play. The audio streaming function may not be supported in some mobile phones. The phonebook may take a prolonged period of time to download or may not ope-
rate in some mobile phones. The quality of Bluetooth handsfree calls may differ depending on the mobile phone. A P P E N D X I I PART 6 APPENDIX Troubleshooting guide 6-2 Before thinking the product has malfunctioned 6-2 Troubleshooting 6-3 Map legend 6-5 Road color 6-5 Landmark icons 6-5 POI icons 6-5 INDEX 6-8 APPENDIX 6-1 PART 6 APPENDIX Troubleshooting guide Before thinking the product has malfunctioned 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your KIA dealer. Problem There are small red, blue, or green dots on the screen The sound or image is not working The video is being displayed but sound is not working When the power is turned on, the corners of the screen are dark Sound is working from only one speaker Sound and video does not work in AUX mode The external device is not working Function Because the LCD is manufactured with technology requiring high point density, a pixel deficiency or lighting may occur within 0.01% of total pixels. Has the Switch for the vehicle been turned to [ACC] or [ON]?
Has the SYSTEM been turned OFF?
Has the volume been set to a low level?
Has the volume been set on mute?
The display looking somewhat darker after prolonged periods of use is a normal phenomenon with LCD panels. It is not a malfunction. If the screen is very dark, contact your nearest KIA dealer for assistance. Is the position of FAL/BAL sound controls or volume adjusted to only one side?
Are the audio and video connector jacks fully inserted into the AUX terminal?
Is the external device connected with a standard connector cable?
The road is missing Some map data may be missing or incorrect. The road name is spoken incorrectly The TTS(Text To Speech) engine speaks the street name based on the phonetic spelling. This will continuously be update with the map database. 6-2 APPENDIX A P P E N D X I I Troubleshooting Problem Possible Cause Solution The power does not turn on. The fuse is disconnected. Replace with a suitable fuse. If the fuse is disconnected again, please contact your point of purchase or serviece center. Device is not properly connected. Check to see that the device has been properly connected. The image color or tone quality is low. The brightness, saturation, hue, and contrast levels are not properly set. Adjust the brighteness, saturation, hue, and contast levels through the display setting. The video does not work. The sound does not work. The brightness level has been set to the lowest level. Adjust the brighteness to a higher level. The device is not properly connected. Check to see that the device has been properly conneted. The volume level is set the lowest level. Adjust the volume level. The connector is not properly connected. Check the connection state. The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode. The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode. The DISC is dirty or scratched. Wipe off water or dirt from the DISC. Do not use a disc which has been scratched. The sound or video quality is low. Vibration is occurring from the position in which the conversion switch has been installed. The sound may be short-circuited and the image distorted if the device begins to vibrate. The device will return to normal operation once the vibration has stopped. The color and tone quality of the image is low. Aging of the video display and deterioration in performance may cause certain quality degradations. APPENDIX 6-3 PART 6 APPENDIX Problem Possible Cause Solution USB memory is damaged. Please use after formatting the USB into FAT 12/16/32 format. USB memory has been contaminated. A separately purchased USB HUB is being used. The USB does not work. A USB extension cable is being used. A USB which is not a Metal Cover Type USB Memory is being used. A HDD type, CF, SD Memory is being used. There are no music files which can be played. Remove any foreign substances on the contact surface of the USB memory and multimedia terminal. Directly connect the USB memory with the multimedia terminal on the vehicle. Directly connect the USB memory with the multimedia terminal on the vehicle. Use a standard USB Memory. Use standard USB Memory. Only MP3,WMA file formats are supported. Please use only the supported music file formats. The iPod is not recognized even though it has been connected. There are no titles which can be played. Use iTunes to download and save MP3 files into the iPod. The iPod firmware version has not been properly updated. Use iTunes to update the firmware version and reconnect the iPod with the device. The iPod device does not recognize downloads. Reset the iPod and reconnect with the device. 6-4 APPENDIX A P P E N D X I I Map legend Road color Day Road Type Color Freeway Arterial County Collector Local Unpaved local Ferry Night Road Type Color Freeway Arterial County Collector Local Unpaved local Ferry Landmark icons POI icons No Category Sub Category Icon No Category Sub Category Icon 1 2 3 4 Service Airport Park Golf University 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Representation Fast Food American French Italian Continental Mexican Restaurants Japanese Chinese Korean Vegetarian Food Seafood Latin American Asian African APPENDIX 6-5 PART 6 APPENDIX POI icons No Category Sub Category Icon No Category Sub Category Icon 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Restaurants Coffee Shop Others Representation Gas Station Parking Auto service Road Assistance Automotive KIA Dealership Automobile Dealership Auto Parts Rest Area Car Wash Motorcycle Dealership Travel Representation Airport 6-6 APPENDIX 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Hotel Tourist Information Travel Agent Tourist Attraction Popular Spot Travel Rental Car Agency Campground Ferry Terminal Bus Station Local Transit Train Station Representation Department Store Convenience Store Shopping Center Shopping No 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Category Sub Category Icon Shopping Music Store Grocery Store Bookstore Electronics Hardware Store Gifts Sporting Goods Home Specialty Store Clothing Shoe Store Representation Amusement Park Recreation Museum Cinema Sports Activities A P P E N D X I I POI icons No Category Sub Category Icon No Category Sub Category Icon No Category Sub Category Icon 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Sports Complex Golf Course Winery Recreation Video & Game Rental Ski Resort Recreation Area Other Recreation Representation Bank ATM Check Cashing Service Money Transfer Business Facility Representation Police Station Financial Service Community 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 Post Office Library Court House Fire Department Convention Center Community City Hall Civic Center School Government Offices Waste & Sanitary Utilities Representation Hospital Dentist Photography Service 91 92 93 94 95 96 97 98 99 100 101 Tax Service Medical Service Attorney Funeral Director Hair & Beauty Service Cleaning & Laundry Social Service Physician Communication Tailor & Alteration Mover APPENDIX 6-7 PART 6 APPENDIX A Adaptive volume control ON/OFF3-52 About CDP 2-11 Activating call waiting5-14 Adding to address book 3-27 Adding waypoints 3-32 Adjusting audio volume1-7 Advanced settings5-26 Audio streaming5-21 Answering an incoming call 5-13 Audio Sound setting 1-10 Auto Volume Control ON/OFF 1-10 AUX 2-32 AUX screen 2-33 B BAS/MID/TRE 1-10 Basic Operation and setting 1-6 Basic operation for voice command control 4-2 Before thinking the product has malfunctioned 5-2 Bluetooth handsfree 5-2 Bluetooth handsfree mode 5-2 Bluetooth settings 5-24 Brightness 1-11 6-8 APPENDIX Browsing detailed information about the iPod music 2-28 Browsing detailed information about the MP3 file 2-22 Browsing detailed information about the SIRIUS channel 2-10 C Call history5-19 CD 4-9 CD screen and functions 2-16 Changing destination position3-27 Changing Route option 3-32 Changing the map scale 3-8 Changing passkey 5-28 Command list of Audio system4-7 Command list of Help 4-6 Command list of Navigation system 4-13 Command list of Phone 4-13 Condition for voice command system 4-2 Condition for voice command system 1-9 Connecting a mobile phone 5-7 Connections 5-7 Connecting AUX 2-32 Connecting iPod devices 2-24 Connecting the USB devices 2-31 Control panel1-3 Controller and functions 1-3 Current position map screen (without route)
3-5 D Deleting all avoid area 3-41 Deleting all paired phones 5-28 Deleting an address book 3-47 Deleting an address of address book 3-46 Deleting avoid area3-41 Deleting favorite place 3-50 Deleting Home address 3-48 Deleting waypoints3-34 Deleting a paired phone 5-6 Destination 4-15 Destination by address book 4-24 Destination by memory point
<1 to 5> 4-25 Destination POI by phone number 4-22 Device information5-27 Device name 5-27 Device address 5-27 Disc/content format compatibility 2-13 A P P E N D X I I Display mode 1-11 Display OFF 1-11 Display ON 1-11 Display setting 1-11 Displaying the list 1-9 Destination menu screen and functions 3-12 Displaying / Hiding POI icons on the map 3-9 Displaying / Hiding Q.POI icons 3-9 Displaying /Hiding icons other than Q.POI icons 3-9 Displaying the list 1-9 Disable streaming audio5-26 Disconnecting a mobile phone 5-8 E Editing an address of address book 3-45 Editing avoid area 3-40 Editing waypoints 3-32 Enable streaming audio 5-26 Ending a call 5-15 F FAD/BAL 1-10 Find address 4-19 Find emergency <Category> 4-23 Find nearest <POI name> 4-21 FM/AM Radio2-2 FM/AM screen and functions2-2 For safe and efficient operation 2-11 Finishing route guidance
(Delete Destination) 3-30 G Giving voice command 1-9 Go home 4-25 GPS signal reception state 3-2 H Handsfree volume 5-25 Help3-54 How to operate a menu by voice command 1-9 How to operate the screen menu1-8 I Important information about this manual 1-2 iPod 2-24 iPod screen and functions 2-25 Initializing system 3-37 Initializing Bluetooth handsfree 5-29 Inserting/Ejecting Disc 2-15 Introduction1-2 Inputting letters by using screen keyboard 1-8 L Landmark icons 7-7 Limitations of the navigation system 3-2 Listening to CD music 2-16 Listening to MP3 music 2-20 Listening to music from iPod 2-24 Listening to the FM/AM radio 2-2 Listening to the SIRIUS radio 2-6 Listening to USB music 2-31 M Main setting 3-36 Making a call to POI 3-10 Map Functions 3-5 Map 4-13 Map legend 6-5 Making a call by dialing a phone number 5-11 Making a call from Speed Dial 5-11 Making a call by redialing 5-12 Making a call from the Phone book 5-16 APPENDIX 6-9 PART 6 APPENDIX Making a call from Call history 5-19 MP3 2-19 MP3 disc related information and precaution
2-19 MP3 screen and functions 2-20 My places setting 3-43 N Navigation setting 3-38 O Operating the CDP 2-11 Operating the external devices 2-24 Operating the radio2-2 Operating typical screen menu 1-7 Operating voice command 4-2 Operating after searching a destination 3-27 Operating after setting a destination 3-28 P Pairings 5-4 Pairing a mobile phone 5-4 Passkey 5-5 Phonebook 5-16 Phonebook download5-16 Phone music 5-21 6-10 APPENDIX Playing AUX 2-32 POI Category list 4-18 Precaution for safe usage1-2 Precautions upon handling discs 2-11 Precautions upon handling USB 2-29 Previous destination 4-24 Previous start point 4-25 Priority5-24 Private mode5-14 R Registering favorite place 3-49 Registering home address 3-48 Registering new address in address book 3-43 Re-ordering waypoints 3-34 Rejecting an incoming call 5-13 REW/FF CD track 2-17 REW/FF iPod music 2-27 REW/FF MP3 file 2-22 Road color 6-5 Route 4-16 Route guidance 3-4, 3-30 Route guidance screen 3-28 Route menu screen and functions 3-30 Route overview(View Entire Route) 3-31 Route Re-calculation 3-4 S Searching a POI3-20 Searching a previous Destination3-17 Searching an Address3-13 Searching an intersection 3-17 Searching favorite places3-26 Searching for Emergency facilities 3-25 Searching from Address book3-24 Searching from MAP 3-26 Searching POI by local POI list3-26 Searching your Home3-25 Searching a destination by voice command
4-19 Searching the Phone Book 5-17 Searching a Destination 3-13 Selecting an item in a list 1-9 Searcting a destination 3-13 Selecting other route3-29 Selecting the MP3 file 2-21 Selecting an item in a list 1-9 Selecting FM/AM broadcast frequency 2-4 Selecting music from iPod 2-26 Selecting SIRIUS broadcast channel2-7 Selecting the CD track 2-17 A P P E N D X I I Selecting Phone Music files5-23 Setting arrival time and distance display3-38 Setting as Destination/waypoint3-27 Setting avoid streets on route3-35 Setting detour distance 3-35 Setting estimate travel time3-42 Setting keyboard for inputting letter 3-36 Setting Language 3-37 Setting Q.POI icons3-42 Setting the Clock 1-14 Setting units (mile/ km) 3-38 Setting voice command feedback ON/OFF 3-37 Setup and Information 3-36 Setup menu screen and functions 3-36 Setting random function for CD music 2-17 Setting random function for iPod music 2-27 Setting random function for MP3 file 2-22 Setting repeat function for CD music 2-18 Setting repeat function for iPod music 2-28 Setting repeat function for MP3 file 2-23 Setting up the voice command system 4-4 Setting voice Prompt ON/OFF4-4 Scanning CD track 2-18 Scanning FM/AM broadcast frequency 2-5 Setting Picture Frame 1-13 Scanning MP3 file 2-23 Scanning SIRIUS broadcast channel 2-10 Scrolling map3-11 SIRIUS Radio2-6 SIRIUS screen and functions2-6 Sorting items from the list 1-8 Speaker adaptation4-4 Steering wheel remote controller 1-5 Storing FM/AM presets 2-5 Storing SIRIUS presets2-9 Supported disc formats 2-12 Starting navigation system 3-5 Starting route Guidance3-28 Sorting call history 5-19 Sorting Items from the list 1-9 Speed dial 5-11 Starting Phone Music5-21 Switching call to the mobile phone 5-14
2-7 Switching the SIRIUS modes(channel/category) Switching map mode(north up/heading up)
3-6 System information and update 3-51 T Touch Screen Beep ON/OFF 1-10 Traffic Information3-52 Traffic Setup 3-52 Troubleshooting 6-3 Troubleshooting guide 6-2 Turning the audio ON/OFF 1-6 Turning the power OFF 1-6 Turning the power ON1-6 U USB 2-29 USB MP3 related information and precaution 2-29 V Vehicle position display 3-3 Viewing Current Time1-13 Viewing GPS signal state 3-7 Voice guidance volume control 3-51 Voice guidance volume setting 3-51 Voice command list 4-6 W Waiting call switch5-15 APPENDIX 6-11 MS Microsoft Windows Automotive Operating System Important Safety Information Read and Follow Instructions Before using your Windows Automotive-based system, read and follow all instructions and safety information provided in this end user manual
("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences. Keep User's Guide in Vehicle When kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Windows Automotive-based system. Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and safety information carefully. Warning:
Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions you might be required to distract your attention away from the road and remove your hands from the wheel. General Operation Voice Command Control Functions within the Windows Automotive-based system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel. 6-12 APPENDIX A P P E N D X I I Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. Volume Setting Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident. Navigation Features Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make cer-
tain all persons using this system carefully read and follow instructions and safety information fully. Distraction Hazard Some navigation features may require manual (non-verbal) setup. Attempting to perform such set-up or insert data while driving can seriously dis-
tract your attention and could cause an accident or other serious consequences. Stop the vehicle in a safe and legal manner before attempting these operations. Let Your Judgment Prevail Any navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing traffic regulations. Any such feature is not a substitute for your personal judgment. Any route suggestions made by this system should never replace any local traffic regulations or your personal judgment or knowledge of safe driving practices. APPENDIX 6-13 MS Route Safety Do not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, if you would be placed in an unsafe situation, or if you would be directed into an area that you consider unsafe. The driver is ultimately responsible for the safe operation of the vehicle and therefore, must evaluate whether it is safe to follow the suggested directions. Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and com-
mon sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to route you to emergency services. Ask local authorities or an emergency services operator for these locations. Not all emergency services such as police, fire stations, hospitals and clinics are likely to be contained in the map data-
base for navigation features. Use of Speech Recognition Functions Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech reco-
gnition functions included in the system and address any errors. 6-14 APPENDIX This equipment has been tested and found to comply with the limits for a Class B digital device ,pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC RF Radiation Exposure Statement:
1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-01-11 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-01-11
|
||||
1 | Applicant's complete, legal business name |
HYUNDAI MOBIS CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0023347537
|
||||
1 | Physical Address |
203, Teheran-ro
|
||||
1 |
Seoul, N/A 135-977
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TQ8
|
||||
1 | Equipment Product Code |
AV1A0IHAN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S**** C******
|
||||
1 | Title |
Senior Engineer
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
c******@mobis.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/25/2011 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CAR AVN | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is maximum conducted RF output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
HCT Co., LTD
|
||||
1 | Name |
S******** L********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
s******@HCT.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0013600 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC