all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.20 MiB | / September 11 2015 | |||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | / September 11 2015 | ||||||
1 | Internal Photos | / September 11 2015 | ||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / September 11 2015 |
1 | User Manual | Users Manual | 3.20 MiB | / September 11 2015 |
K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 6 Audio system Using a cellular phone or a two-
way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equipment. CAUTION When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehi-
cle's electrical system and adversely affect safe operation of the vehicle. WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Caring for disc
If the temperature inside the car is too high, open the car windows to ventilate before using the system.
It is illegal to copy and use MP3/WMA files without permis-
sion. Use CDs that are created only by lawful means.
Do not apply volatile agents, such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs.
To prevent the disc surface from getting damaged, hold CDs by the edges or the center hole only.
Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).
Do not damage the disc surface or attach pieces of sticky tape or paper.
Make certain only CDs are insert-
ed into the CD player (Do not insert more than one CD at a time).
Keep CDs in their cases after use to protect them from scratches or dirt. JBM005
Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.
Multi-Path Cancellation - Radio signals being received from sever-
al directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close fre-
quencies. If this occurs, select another station until the condition has passed. 6 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 7 Audio system NOTE:
Order of playing files (folders) :
1. Song playing order :
to sequentially. 2. Folder playing order :
If no song file is contained in the folder, that folder is not dis-
played.
Depending on the type of CD-
R/CD-RW CDs, certain CDs may not operate normally according to manufacturing companies or mak-
ing and recording methods. In such circumstances, continued use may cause malfunctions to your audio system. NOTICE - Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with international audio CD standards (Red Book), may not play on your car audio. Please note that inabilities to properly play a copy protected CD may indicate that the CD is defective, not the CD player. 7 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 8 Audio system WARNING
Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents.
Do not disassemble, assem-
ble, or modify the audio sys-
tem. Such acts could result in accidents, fire, or electric shock.
Using the phone while driving may lead to a lack of attention traffic conditions and of increase the likelihood of accidents. Use the phone fea-
ture after parking the vehicle.
(Continued)
(Continued)
Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.
Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunc-
tion. Continued use in such conditions could lead to acci-
dents (fires, electric shock) or product malfunctions.
Do not touch the antenna dur-
ing thunder or lightening as such acts may lead to light-
ning induced electric shock.
(Continued)
(Continued)
Do not stop or park in park-
ing-restricted areas to operate the product. Such acts could lead to traffic accidents. ignition
Use the system with the vehi-
cle turned on. Prolonged use with the igni-
tion turned off could result in battery discharge. 8 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 9 CAUTION
Operating the device while driving could lead to acci-
dents due to a lack of atten-
tion to external surroundings. First park the vehicle before operating the device.
Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to acci-
dents.
Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.)
(Continued)
(Continued)
If you want to change the posi-
tion of device installation, please inquire with your place of purchase or service mainte-
nance center. Technical expertise is required to install or disassemble the device.
Turn on the car ignition before using this device. Do not oper-
ate the audio system for long periods of time with the igni-
tion turned off as such opera-
tions may lead to battery dis-
charge.
Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.
(Continued) Audio system
(Continued)
When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, benzene, thinners, etc.) as such materials may damage the device panel or cause color/quality deterioration
Do not place beverages close to the audio system. Spilling beverages may lead to system malfunction.
In case of product malfunc-
tion, please contact your place of purchase or After Service center.
Placing the audio system with-
in an electromagnetic environ-
ment may result in noise inter-
ference. 9 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 10 Audio system NOTICE - USING THE USB DEVICE To use an external USB device, make sure the device is not con-
nected when starting up the vehi-
cle. Connect the device after start-
ing up. If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. The System may not play inau-
thentic MP3 or WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps ~ 320Kbps. 2) It can only play WMA music files with the compression rate between 8Kbps ~ 320Kbps. Take precautions for static elec-
tricity when connecting or discon-
necting the external USB device. An encrypted MP3 PLAYER is not recognizable.
(Continued) 10
(Continued) Depending on the condition of the external USB device, the connect-
ed external USB device can be unrecognizable. When the formatted byte/sector setting of External USB device is not or 2048BYTE, then the device will not be recognized. 512BYTE either Use only a USB device formatted to FAT 12/16/32. USB devices without USB I/F authentication may not be recog-
nizable. Make sure the USB connection terminal does not come in contact with the human body or other objects. If you repeatedly connect or dis-
connect the USB device in a short period of time, it may break the device. You may hear a strange noise when connecting or disconnecting a USB device.
(Continued)
(Continued) If you disconnect the external USB device during playback in USB mode, the external USB device can be damaged or may malfunction. Therefore, disconnect the external USB device when the audio is turned off or in another mode.
(e.g, Radio, CD) Depending on the type and capac-
ity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device. Do not use the USB device for pur-
poses other than playing music files. Playing videos through the USB is not supported. Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble.
(Continued) K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 11 Audio system
(Continued) Some USB flash memory readers
(such as CF, SD, micro SD, etc.) or external-HDD type devices can be unrecognizable. Music files protected by DRM
(DIGITAL RIGHTS MANAGE-
MENT) are not recognizable. The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device. Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products.
(Continued) If you use devices such as a USB hub purchased separately, the vehicles audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia termi-
nal of the vehicle. If the USB device is divided by log-
ical drives, only the music files on the highest-priority drive are rec-
ognized by car audio. Devices such as MP3 Player/
Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. Charging through the USB may not be supported in some mobile devices. USB HDD or USB types liable to connection failures due to vehicle vibrations are not supported. (i-
stick type) Some non-standard USB devices
(METAL COVER TYPE USB) can be unrecognizable.
(Continued) 11 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:00 AM Page 12 Audio system NOTICE - USING THE iPod DEVICE Some iPod models may not sup-
port communication protocol and files may not properly play. Supported iPod models:
- iPhone 3GS/4
- iPod touch 1st~4th generation
- iPod nano 1st~6th generation
- iPod classic The order of search or playback of songs in the iPod can be different from the order searched in the audio system. If the iPod disabled due to its own iPod. malfunction, reset
(Reset: Refer to iPod manual) the An iPod may not operate normal-
ly on low battery.
(Continued) 12
(Continued) Some iPod devices, such as the iPhone, can be connected through the Bluetooth Wireless Technology interface. The device must have Bluetooth audio Wireless Technology capability (such as for headphone Bluetooth stereo Wireless Technology ). The device can play, but it will not be con-
trolled by the audio system. To use iPod features within the audio, use the cable provided upon purchas-
ing an iPod device. Skipping or improper operation may occur depending on the characteris-
tics of your iPod/Phone device. If your iPhone is connected to both the Bluetooth Wireless Technology and USB, the sound may not be prop-
erly played. In your iPhone, select the Dock connector or Bluetooth Wireless Technology to change the sound output (source).
(Continued)
(Continued) When connecting iPod with the iPod Power Cable, insert the con-
nector to the multimedia socket completely. If not inserted com-
pletely, communications between iPod and audio may be interrupted. When adjusting the sound effects of the iPod and the audio system, the sound effects of both devices will overlap and might reduce or distort the quality of the sound. Deactivate (turn off) the equalizer function of an iPod when adjust-
ing the audio systems volume, and turn off the equalizer of the audio system when using the equalizer of an iPod. When not using iPod with car audio, detach the iPod cable from iPod. Otherwise, iPod may remain in accessory mode, and may not work properly. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 13 Audio system CD Player Type A-1 Type A-2
(equipped with BluetoothWireless Technology) 13 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 14 Audio system SYSTEM CONTROLLERS AND FUNCTIONS Display and settings may differ depending on the selected audio. Audio Head Unit Type A-1
(1) Ejects the disc.
(EJECT) RADIO
(2) Changes to FM/AM mode. Each time the key is pressed,the mode is changed in order of FM1 FM2 FMA AM AMA. 14
(for DAB model) FM1 FM2 FMA DAB1 DAB2 AM. MEDIA
(3) Changes to CD, USB(iPod), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music, BT Audio.
(4)
(for Bluetooth Wireless PHONE Technology equipped model) Operates Phone Screen When a phone is not connected, the connection screen is displayed.
(5) PWR/VOL kob Power Knob: Turns power On/Off by pressing the knob Volume Knob: Sets volume by turning the knob left/right TRACK
, SEEK
(6) Radio Mode : Automatically search-
es for broadcast frequencies. CD, USB, iPod, My Music modes
- Shortly press the key (under 0.8 seconds): Moves to next or previ-
ous song (file)
- Press and hold the key (over 0.8 seconds): Rewinds or fast-forwards the current song. 6 1
~
(Preset)
(7) Radio Mode: Saves frequencies
(channels) or receives saved fre-
quencies (channels) CD, USB, iPod, My Music mode
-
-
In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected.
: Repeat
: Random 1 RPT 2 RDM K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 15 TA/SCAN
(9)
Radio Mode
- Shortly press the key (under 0.8 seconds): TA On/Off
- Press and hold the key (over 0.8 seconds): Previews each broad-
cast for 5 seconds each.
Media mode
- Press and hold the key (over 0.8 seconds): Previews each song
(file) for 10 seconds each. Press and holding the key again to continue listening to the current song (file). SETUP CLOCK
(10)
Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System set-
ting modes
Press and hold the key (over 0.8 seconds) : Move to the Time set-
ting screen
(8)
Each time the button is shortly pressed (under 0.8 seconds), sets screen Off Screen On Screen Off Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. Audio system MEMU
(11) Displays menus for the current m ode. iPod List : Move to parent category TUNE knob
(12) Radio mode : Changes frequency by turning the knob left/right CD, USB, iPod, My Music mode:
Searches .songs (files) by turning the knob left/right. When the desired song is dis-
played, press the knob to play the song. Moves focus in all selection menus and selects menus FOLDER FOLDER
(13) MP3 CD / USB mode : Folder Search
, 15 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 16 Audio system Audio Head Unit
(for Type A-2) Type A-2 FM
(14)
Changes to FM mode.
Each time the key is pressed, the mode changed in order of FM1 FM2 FMA. AM
(15)
Changes to AM AMA mode. 16 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 17 Audio system CD Player Type A-3 Type A-4
(equipped with BluetoothWireless Technology) 17 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 18 Audio system SYSTEM CONTROLLERS AND FUNCTIONS Display and settings may differ depending on the selected audio. Audio Head Unit Type A-3
(1) Ejects the disc.
(EJECT) RADIO
(2) Changes to FM/AM mode. Each time the key is pressed,the mode is changed in order of FM1 FM2 AM 18 MEDIA
(3) Changes to CD, USB(iPod), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music, BT Audio.
(4)
(for Bluetooth Wireless PHONE Technology equipped model) Operates Phone Screen When a phone is not connected, the connection screen is dis-
played.
(5) PWR/VOL kob Power Knob: Turns power On/Off by pressing the knob Volume Knob: Sets volume by turning the knob left/right TRACK
, SEEK
(6) Radio Mode : Automatically search-
es for broadcast frequencies. CD, USB, iPod, My Music modes
- Shortly press the key (under 0.8 seconds): Moves to next or previ-
ous song (file)
- Press and hold the key (over 0.8 seconds): Rewinds or fast-for-
wards the current song. 6 1
~
(Preset)
(7) Radio Mode: Saves frequencies
(channels) or receives saved fre-
quencies (channels) CD, USB, iPod, My Music mode
-
-
In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected.
: Repeat
: Random 1 RPT 2 RDM K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 19 SCAN
(9)
Radio Mode
- Press the key (under 0.8 seconds):
Previews each broadcast for 5 sec-
onds each
CD, USB, My Music mode
- Press the key (under 0.8 seconds):
Previews each song (file) for 10 seconds each Press the key again to continue listening to the current song (file). SETUP CLOCK
(10)
Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System set-
ting modes
Press and hold the key (over 0.8 seconds) : Move to the Time set-
ting screen
(8)
Each time the button is shortly pressed (under 0.8 seconds), sets screen Off Screen On Screen Off Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. Audio system MEMU
(11) Displays menus for the current m ode. iPod List : Move to parent category TUNE knob
(12) Radio mode : Changes frequency by turning the knob left/right CD, USB, iPod, My Music mode:
Searches .songs (files) by turning the knob left/right. When the desired song is dis-
played, press the knob to play the song. Moves focus in all selection menus and selects menus FOLDER
(13) MP3 CD / USB mode : Folder Search
, FOLDER 19 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 20 Audio system Audio Head Unit
(for Type A-4) Type A-4 FM
(14)
Changes to FM mode.
Each time the key is pressed, the mode changed in order of FM1 FM2. AM
(15)
Changes to AM mode. 20 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 21 Audio system CD Player Type A-5 Type A-6
(equipped with BluetoothWireless Technology) 21 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:01 AM Page 22 MEDIA
(3) Changes to CD, USB(iPod), AUX, My Music, BT Audio mode. Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music, BT Audio.
(4)
(for Bluetooth Wireless PHONE Technology equipped model) Operates Phone Screen When a phone is not connected, the connection screen is displayed.
(5) PWR/VOL kob Power Knob: Turns power On/Off by pressing the knob Volume Knob: Sets volume by turning the knob left/right Audio system SYSTEM CONTROLLERS AND FUNCTIONS Display and settings may differ depending on the selected audio. Audio Head Unit Type A-5
(1) Ejects the disc.
(EJECT) RADIO
(2) Changes to FM/AM mode. Each time the key is pressed,the mode is changed in order of FM1 FM2 AM 22 TRACK
, SEEK
(6) Radio Mode : Automatically search-
es for broadcast frequencies. CD, USB, iPod, My Music modes
- Shortly press the key (under 0.8 seconds): Moves to next or previ-
ous song (file)
- Press and hold the key (over 0.8 seconds): Rewinds or fast-forwards the current song. 6 1
~
(Preset)
(7) Radio Mode: Saves frequencies
(channels) or receives saved fre-
quencies (channels) CD, USB, iPod, My Music mode
-
-
In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected.
: Repeat
: Random 1 RPT 2 RDM K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 23 SCAN
(9)
Radio Mode
- Press the key (under 0.8 seconds):
Previews each broadcast for 5 sec-
onds each
CD, USB, My Music mode
- Press the key (under 0.8 seconds):
Previews each song (file) for 10 seconds each Press the key again to continue listening to the current song (file). SETUP CLOCK
(10)
Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System set-
ting modes
Press and hold the key (over 0.8 seconds) : Move to the Time set-
ting screen DISP
(8) Each time the button is shortly pressed (under 0.8 seconds), sets screen Off Screen On Screen Off Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. Audio system MEMU
(11) Displays menus for the current m ode. iPod List : Move to parent category TUNE knob
(12) Radio mode : Changes frequency by turning the knob left/right CD, USB, iPod, My Music mode:
Searches .songs (files) by turning the knob left/right. When the desired song is dis-
played, press the knob to play the song. Moves focus in all selection menus and selects menus FOLDER FOLDER
(13) MP3 CD / USB mode : Folder Search
, 23 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 24 Audio system Audio Head Unit
(for Type A-6) Type A-6 FM
(14)
Changes to FM mode.
Each time the key is pressed, the mode changed in order of FM1 FM2. AM
(15)
Changes to AM mode. 24 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 25 SETUP Type A-1, Type A-2, Type A-3, Type A-4 Display Settings Press the through key Select menu through TUNE knob SETUP CLOCK TUNE knob or key Select [Display]
1 RPT Mode Pop up
[Mode Pop up] Changes selection mode
During On state, press the RADIO key to display the mode MEDIA or change pop up screen. ON
. Audio system Sound Settings Press the through Select menu through SETUP CLOCK TUNE knob or 2 RDM key TUNE knob key Select [Sound]
Scroll text
[Scroll text] Set
OFF ON ON
/
OFF
: Maintains scroll
: Scrolls only one (1) time. Song Info When playing an MP3 file, select the desired display info from Folder/File or Album/Artist/Song. 25 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 26 Audio system Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set
[Off/On] of TUNE knob Volume Dialogue Adjusts voice recognition volume. Select [Volume Dialogue] Set vol-
ume of TUNE knob Audio Settings This menu allows you to set the Bass, Middle, Treble and the Sound Fader and Balance. Select menu through Select TUNE knob Turn
[Audio Settings]
TUNE knob left/right to set
Bass, Middle, Treble : Selects the sound tone.
Fader, Balance : Moves the sound fader and balance.
Default : Restores default settings. Return : While adjusting values, TUNE knob will re-pressing the restore the parent menu. 26 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 27 Audio system CLOCK SETTINGS Press the through Select menu through SETUP CLOCK TUNE knob or 3 key TUNE knob key Select [Clock]
Clock Settings This menu is used to set the time. Select [Clock Settings] Set through TUNE knob TUNE knob Press Day Settings This menu is used to set the date
(DD/MM/YYYY). Select [Day Settings] Set through TUNE knob Press TUNE knob Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute]. Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting. (Set in order of Day/Month/Year) 27 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 28 Automatic RDS Time This option is used to automatically set the time by synchronizing with RDS. Select [Automatic RDS Time] Set TUNE knob through On Off
/
On Off
: Turn on Automatic Time
: Turn off. NOTICE Because some local radio stations do not support an automatic RDS time function, some RDS Transmitters may not provide correct time. If incorrect time is displayed, set it manually following the Step "Clock Setting" in previous page. Audio system Time Format This function is used to set the 12/24 hour time format of the audio system. Select
[Time Format] Set 12Hr / 24Hr through TUNE knob Clock Display when Power is OFF Select [Clock Disp.(Pwr Off) Set On
/
On Off through TUNE knob Off
: Displays time/date on screen
: Turn off.
28 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 29 Phone Setup
(BluetoothWireless Technology equipped model) Pair Phone Select [Pair Phone] Set through TUNE knob Press the SETUP CLOCK key Select [Phone]
CAUTION Hear, enter the passkey 0000 to pair your Bluetooth Wireless Technology device with the car audio system.
[SSP supported device]
Audio system To pair a Bluetooth Wireless Technology enabled mobile phone, authentication and con-
nection processes are first required. As a result, you can-
not pair your mobile phone while driving the vehicle. First park your vehicle before use. Search for device names as dis-
played on your mobile phone and connect.
[Non SSP supported device]
(SSP: Secure Simple Pairing) After a few moments, a screen is displayed where the passkey is entered. After a few moments, a screen is displayed 6 digits passkey. Hear, check the passkey on your Bluetooth Wireless Technology device and confirm. The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not com-
pleted within the 3 minutes, the mobile phone pairing process will automatically be canceled. Pairing completion is displayed. In some mobile phones, pairing will automatically be followed by connection. It is possible to pair up to five Bluetooth Wireless Technology enabled mobile phones. 29 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 30 Audio system Phone List The names of up to 5 paired phones will be displayed.
Connecting a phone Select [Phone List] Select mobile phone through Select [Connect Phone]
TUNE knob
Disconnecting a connected phone Select [Phone List] Select mobile phone through Select [Disconnect Phone]
TUNE knob
] is displayed in front of the cur-
A [
rently connected phone. Select the desired name to setup the selected phone. Select a mobile phone that is not currently connected. Select the currently connected mobile phone. Connect phone. the selected mobile Connection completion is dis-
played. If a phone is already connected, disconnect the currently connect-
ed phone and select a new phone to connect. Disconnect the selected mobile phone. Disconnection completion is dis-
played. 30 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 31
Changing connection sequence
(Priority)
- The connected phone will automat-
ically be changed to No. 1 priority. This is used to change the order (pri-
ority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority]
through TUNE knob Select No. 1 Priority mobile phone Select [Priority]. From the paired phones, select the phone desired for No.1 priority. The changed priority sequence is displayed. Once the connection sequence
(priority) is changed, the new no. 1 priority mobile phone will be con-
nected.
- When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently con-
nected phone.
- Cases when the most recently con-
nected phone cannot be connect-
ed: Attempts to connect in the order in which paired phones are listed.
Delete Select [Phone List] Select mobile phone through Select [Delete]
TUNE knob Select the desired mobile phone. Delete the selected mobile phone. Deletion completion is displayed. When attempting to delete a cur-
rently connected phone, the phone is first disconnected. CAUTION
When you delete a mobile phone, the mobile phone phone book will also be erased.
For stable BluetoothWireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. Audio system Phone book Download This feature is used to download phone book and call histories into the audio system. Select [Phone book Download]
Select through TUNE knob CAUTION
The download feature may not be supported in some mobile phones.
When downloading new phone book, delete all previously saved phone book before start-
ing download. 31 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 32 Audio system Auto Download When connecting a mobile phone, it is possible to automatically download new phone book and Call Histories. Select [Auto Download] Set TUNE knob OFF through ON
/
Outgoing Volume This is used to set the volume of your voice as heard by the other party while on a Bluetooth Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set vol-
ume through Even while on a call, the volume can be changed by using the SEEK TUNE knob key. TRACK
, BluetoothWireless Technology System Off This feature is used when you do not wish to use the Bluetooth Wireless Technology system. Select [Bluetooth System Off] Set through If a phone is already connected, disconnect the currently connect-
ed phone and turn the Bluetooth Wireless Technology system off. TUNE knob 32 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 33 Using the BluetoothWireless Technology System To use BluetoothWireless Technology when the system is currently off, follow these next steps.
Turning On Bluetooth Wireless PHONE Technology through the Key Press Guidance Moves PHONE the to the screen where Bluetooth Wireless Technology functions can be used and displays guidance. key Screen
Turning On Bluetooth Wireless SETUP CLOCK Technology through the Key SETUP CLOCK key Select [Phone]
Press the knob A screen asking whether to turn on BluetoothWireless Technology will be displayed. On the screen, select to turn on Bluetooth Wireless Technology and display guidance. YES If the BluetoothWireless Technology system is turned on, the system will automatically try to connect the most recently connected Bluetooth Wireless Technology mobile phone. Audio system CAUTION
BluetoothWireless Technology connection may become inter-
mittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the Bluetooth Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to connect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. 33 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 34 Audio system System Settings Press the SETUP CLOCK key Select [System]
Memory Information
(if equipped) Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is dis-
played on the left side while the total system memory is displayed on the right side. May differ depending on selected audio. the VRS Mode (if equipped) This feature is used to change voice command feedback between Normal and Expert modes. Select [VRS Mode] Set through TUNE knob
Normal : This mode is for beginner users and provides detailed instructions during voice command operation.
Expert : This mode is for expert users and omits some information during voice command operation.
(When using Expert mode, guid-
ance instructions can be heard through the [Help] or [Menu] com-
mands. May differ depending on selected audio. the 34 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 35 Audio system Language This menu is used to set the display and voice recognition language. Select
[Language] Set through TUNE knob SETUP Type A-5, Type A-6
(for Colombia model) Display Settings Press the through Select menu through SETUP CLOCK TUNE knob or 1 RPT key TUNE knob key Select [Display]
The system will reboot after the language is changed. Language support by region Mode Pop up
[Mode Pop up] Changes selection mode
During On state, press the On RADIO key to display the mode MEDIA or change pop up screen.
/
Off Media Display When playing an MP3 file, select the desired display info from Folder/File or Album/Artist/Song. 35 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:02 AM Page 36 Audio system SOUND SETTINGS Press the through Select menu through SETUP CLOCK TUNE knob or 2 RDM key TUNE knob key Select [Sound]
Sound Settings This menu allows you to set the Bass, Middle, Treble and the Sound Fader and Balance. Select menu through
[Sound Settings] Select TUNE knob Turn TUNE knob left/right to set Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set
[Off/On] of TUNE knob
Bass, Middle, Treble : Selects the sound tone.
Fader, Balance : Moves the sound fader and balance.
Default : Restores default settings. Back : While adjusting values, TUNE knob will pressing the restore the parent menu. 36 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 37 CLOCK SETTINGS Press the through Select menu through SETUP CLOCK TUNE knob or 3 key TUNE knob key Select [Clock]
Audio system Sound Settings This menu is used to set the time. Select [Clock Settings] Set through TUNE knob TUNE knob Press Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting. (Set in order of Day/Month/Year) Time Format This function is used to set the 12/24 hour time format of the audio system. Select [Time Format] Set 12Hr / 24Hr through TUNE knob. Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute]
and [AM/PM]. Calendar Settings This menu is used to set the date
(MM/DD/YYYY). Select [Calendar Settings] Set through TUNE knob Press TUNE knob On On Off Clock Display when Power is OFF Select [Clock Disp.(Pwr Off)] Set
/
Off through TUNE knob
: Displays time/date on screen
: Turn off. 37 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 38 Audio system Phone Setup
(BluetoothWireless Technology equipped model) Press the SETUP CLOCK key Select [Phone]
38 Pair Phone Select [Pair Phone] Set through TUNE knob CAUTION To pair a Bluetooth Wireless Technology enabled mobile phone, authentication and con-
nection processes are first required. As a result, you can-
not pair your mobile phone while driving the vehicle. First park your vehicle before use. Search for device names as dis-
played on your mobile phone and connect.
[Non SSP supported device]
(SSP: Secure Simple Pairing) After a few moments, a screen is displayed where the passkey is entered. Hear, enter the passkey 0000 to pair your Bluetooth Wireless Technology device with the car audio system.
[SSP supported device]
After a few moments, a screen is displayed 6 digits passkey. Hear, check the passkey on your Bluetooth Wireless Technology device and confirm. The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not com-
pleted within the 3 minutes, the mobile phone pairing process will automatically be canceled. Pairing completion is displayed. In some mobile phones, pairing will automatically be followed by connection. It is possible to pair up to five Bluetooth Wireless Technology enabled mobile phones. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 39 Phone List The names of up to 5 paired phones will be displayed.
Connecting a phone Select [Phone List] Select mobile phone through Select [Connect Phone]
TUNE knob
Disconnecting a connected phone Select [Phone List] Select mobile phone through Select [Disconnect Phone]
TUNE knob Audio system
] is displayed in front of the cur-
A [
rently connected phone. Select the desired name to setup the selected phone. Select a mobile phone that is not currently connected. Select the currently connected mobile phone. Connect phone. the selected mobile Connection completion is dis-
played. If a phone is already connected, disconnect the currently connect-
ed phone and select a new phone to connect. Disconnect the selected mobile phone. Disconnection completion is dis-
played. 39 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 40 Audio system
Changing connection sequence
(Priority) This is used to change the order (pri-
ority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority]
through TUNE knob Select No. 1 Priority mobile phone Select [Priority]. From the paired phones, select the phone desired for No.1 priority. The changed priority sequence is displayed. Once the connection sequence
(priority) is changed, the new no. 1 priority mobile phone will be con-
nected.
- When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently con-
nected phone.
- Cases when the most recently con-
nected phone cannot be connect-
ed: Attempts to connect in the order in which paired phones are listed.
- The connected phone will automat-
ically be changed to No. 1 priority. 40 Contacts Download This feature is used to download contacts and call histories into the audio system. Select [Contacts Download] Select through TUNE knob CAUTION
The download feature may not be supported in some mobile phones.
When downloading new Contacts, delete all previously saved Contacts before start-
ing download. TUNE knob
Delete Select [Phone List] Select mobile phone through Select [Delete]
Select the desired mobile phone. Delete the selected mobile phone. Deletion completion is displayed. When attempting to delete a cur-
the rently connected phone, phone is first disconnected. CAUTION
When you delete a mobile phone, the mobile phone con-
tacts will also be erased.
For stable BluetoothWireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 41 Audio system Auto Download When connecting a mobile phone, it is possible to automatically download new Contacts and Call Histories. Select [Auto Download] Set ON TUNE knob OFF through
/
in
(files) saved Audio Streaming Songs your Bluetooth Wireless Technology enabled mobile phone can be played through the audio system. Select [Audio Streaming] Set OFF TUNE knob through ON
/
Outgoing Volume This is used to set the volume of your voice as heard by the other party while on a Bluetooth Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set vol-
ume through While on a call, the volume can be
, changed by using the TRACK TUNE knob SEEK key. CAUTION The Bluetooth Wireless Technology audio streaming feature may not be supported in some mobile phones. 41 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 42 Audio system BluetoothWireless Technology System Off This feature is used when you do not wish to use the Bluetooth Wireless Technology system. Select [Bluetooth System Off] Set through If a phone is already connected, disconnect the currently connect-
ed phone and turn the Bluetooth Wireless Technology system off. TUNE knob Using the BluetoothWireless Technology System To use BluetoothWireless Technology when the system is currently off, fol-
low these next steps.
Turning On Bluetooth Wireless Key Technology through the PHONE PHONE key Screen Press the Guidance Moves to the screen where Bluetooth Wireless Technology functions can be used and dis-
plays guidance. 42
Turning On Bluetooth Wireless SETUP CLOCK Technology through the Key SETUP CLOCK Press the key Select [Phone]
A screen asking whether to turn on BluetoothWireless Technology will be displayed. On the screen, select to turn on Bluetooth Wireless Technology and display guidance. YES If the Bluetooth Wireless Technology system is turned on, the system will automatically try to connect the most recently con-
nected Bluetooth Wireless Technology mobile phone. CAUTION
BluetoothWireless Technology connection may become inter-
mittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the Bluetooth Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to connect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 43 Audio system SYSTEM SETTINGS Press the
[System]
SETUP Select CLOCK Select menu through key TUNE knob Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is dis-
played on the left side while the total system memory is displayed on the right side. Language This menu is used to set the display and voice recognition language. Select [Language]
Set through TUNE knob The system will reboot after the language is changed. Language support by region
- English, Franais, Espaol 43 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 44 Audio system SETUP Type A-5, Type A-6 Display Settings Mode Pop up
[Mode Pop up] Changes selection mode
During On state, press the RADIO key to display the mode MEDIA or change pop up screen. ON
. SETUP CLOCK the Press
[Display] through 1 RPT key Select menu key Select TUNE knob or through TUNE knob Text Scroll
[Text Scroll] Set
/
: Maintains scroll
: Scrolls only one (1) time. ON OFF OFF ON Media Display When playing an MP3 file, select the desired display info from Folder/File or Album/Artist/Song. 44 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 45 SOUND SETTINGS SETUP CLOCK the Press
[Sound] through 2 RDM TUNE knob key Select menu key Select TUNE knob or through Sound Settings This menu allows you to set the Bass, Middle, Treble and the Sound Fader and Balance. Select menu through
[Sound Settings] Select TUNE knob Turn TUNE knob left/right to set
Bass, Middle, Treble : Selects the sound tone.
Fader, Balance : Moves the sound fader and balance.
Default : Restores default settings. Return : While adjusting values, TUNE knob will re-pressing the restore the parent menu. Audio system Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set
[Off/On] of TUNE knob 45 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 46 Audio system CLOCK SETTINGS Press the through Select menu through SETUP CLOCK TUNE knob or 3 key TUNE knob key Select [Clock]
Clock Settings This menu is used to set the time. Select [Clock Settings] Set through TUNE knob TUNE knob Press Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting. (Set in order of Year/Month/Day) Clock Display when Power is OFF Select [Clock Disp.(Pwr Off) Set On
/
Off through TUNE knob Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute].
On Off
: Displays time/date on screen
: Turn off. Calendar Settings This menu is used to set the date
(YYYY/MM/DD). Select [Calendar Settings] Set through TUNE knob Press TUNE knob 46 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 47 Phone Setup
(BluetoothWireless Technology equipped model) Press the SETUP CLOCK key Select [Phone]
Pair Phone Select [Pair Phone] Set through TUNE knob CAUTION To pair a Bluetooth Wireless Technology enabled mobile phone, authentication and con-
nection processes are first required. As a result, you can-
not pair your mobile phone while driving the vehicle. First park your vehicle before use. Search for device names as dis-
played on your mobile phone and connect. Input the passkey displayed on the screen. (Passkey : 0000) The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not com-
pleted within the 3 minutes, the mobile phone pairing process will automatically be canceled. Audio system Pairing completion is displayed. In some mobile phones, pairing will automatically be followed by connection. It is possible to pair up to five Bluetooth Wireless Technology enabled mobile phones. 47 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 48 Audio system Phone List The names of up to 5 paired phones will be displayed.
Connecting a phone Select [Phone List] Select mobile phone through Select [Connect Phone]
TUNE knob
Disconnecting a connected phone Select [Phone List] Select mobile phone through Select [Disconnect Phone]
TUNE knob
] is displayed in front of the cur-
A [
rently connected phone. Select the desired name to setup the selected phone. Select a mobile phone that is not currently connected. Connect phone. the selected mobile Connection completion is dis-
played. If a phone is already connected, disconnect the currently connect-
ed phone and select a new phone to connect. Select the currently connected mobile phone. Disconnect the selected mobile phone. Disconnection completion is dis-
played. 48 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 49 TUNE knob
Delete Select [Phone List] Select mobile phone through Select [Delete]
Select the desired mobile phone. Delete the selected mobile phone. Deletion completion is displayed. When attempting to delete a cur-
the rently connected phone, phone is first disconnected. CAUTION
When you delete a mobile phone, the mobile phone con-
tacts will also be erased.
For stable BluetoothWireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone.
Changing connection sequence
(Priority) This is used to change the order (pri-
ority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority]
through TUNE knob Select No. 1 Priority mobile phone Select [Priority]. From the paired phones, select the phone desired for No.1 priority. The changed priority sequence is displayed. Once the connection sequence
(priority) is changed, the new no. 1 priority mobile phone will be con-
nected.
- When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently con-
nected phone.
- Cases when the most recently con-
nected phone cannot be connect-
ed: Attempts to connect in the order in which paired phones are listed.
- The connected phone will automat-
ically be changed to No. 1 priority. Audio system Contacts Download This feature is used to download contacts and call histories into the audio system. Select [Contacts Download] Select through TUNE knob CAUTION
The download feature may not be supported in some mobile phones.
When downloading new Contacts, delete all previously saved Contacts before start-
ing download. 49 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 50 Audio system Outgoing Volume This is used to set the volume of your voice as heard by the other party while on a Bluetooth Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set vol-
ume through While on a call, the volume can be
, changed by using the TRACK TUNE knob SEEK key. Auto Download When connecting a mobile phone, it is possible to automatically download new Contacts and Call Histories. Select [Auto Download] Set ON TUNE knob OFF through
/
Audio Streaming Songs (files) saved in your Bluetooth Wireless Technology enabled mobile phone can be played through the audio system. Select [Audio Streaming] Set OFF TUNE knob through ON
/
CAUTION The Bluetooth Wireless Technology audio streaming feature may not be supported in some mobile phones. 50 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:03 AM Page 51
Turning On Bluetooth Wireless SETUP CLOCK Technology through the Key SETUP CLOCK Press the key Select [Phone]
A screen asking whether to turn on BluetoothWireless Technology will be displayed. On the screen, select to turn on Bluetooth Wireless Technology and display guidance. YES If the Bluetooth Wireless Technology system is turned on, the system will automatically try to connect the most recently con-
nected Bluetooth Wireless Technology mobile phone. BluetoothWireless Technology System Off This feature is used when you do not wish to use the Bluetooth Wireless Technology system. Select [Bluetooth System Off] Set through If a phone is already connected, disconnect the currently connect-
ed phone and turn the Bluetooth Wireless Technology system off. TUNE knob Using the BluetoothWireless Technology System To use BluetoothWireless Technology when the system is currently off, follow these next steps.
Turning On Bluetooth Wireless Key Technology through the PHONE PHONE key Screen Press the Guidance Moves to the screen where Bluetooth Wireless Technology functions can be used and dis-
plays guidance. Audio system CAUTION
BluetoothWireless Technology connection may become inter-
mittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the Bluetooth Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to connect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. 51 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 52 Audio system
Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the currently playing broadcast to the selected key and sound a BEEP.
~
1 6 key TA/SCAN SCAN Press the
Pressing and holding the key (over 0.8 seconds): The broadcast fre-
quency increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency. SYSTEM SETTINGS Press the SETUP CLOCK key Select [System]
Memory Information Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is dis-
played on the left side while the total system memory is displayed on the right side. 52 RADIO (for RDS model) RADIO may differ depending on the selected audio. Changing RADIO mode
, SEEK TRACK key SEEK Press the
Shortly pressing the key (under 0.8 seconds): Changes the frequency.
Pressing and holding the key (over 0.8 seconds): Automatically search-
es for the next frequency. Preset SEEK Press the 1
Shortly pressing the key (under 0.8 frequency seconds): Plays saved in the corresponding key. the key
~
6 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 53 Audio system Selecting through manual search Turn the adjust the frequency. TUNE knob left/right to AST (Auto Store) Press the through MENU TUNE knob or key Set [ AST]
key. 1 RPT Region Press Region] through the MENU 3 key. key Set
[
TUNE knob or Traffic Announcement (TA) Shortly pressing the TA/SCAN
(under 0.8 seconds): Set
/
TA Traffic Announcement) mode. ON key OFF MENU Within
(Auto Store) and Info functions. MENU key are the A.Store 6 1
~
Select AST (Auto Store) to save fre-
quencies with superior reception to
. If no frequen-
presets cies are received, then the most recently received frequency will be broadcast. Saves only to the Preset memory of FMA or AMA
~
1 6 mode. MENU AF (Alternative Frequency) key Set [ AF]
Press the through key. The Alternative Frequency option can be turned On/Off. TUNE knob or 2 RDM The Region option can be turned On/Off. News key Set [ News]
Press the through key. The News option can be turned On/Off. MENU TUNE knob or 4 Info Volume Info Volume refers to the sound vol-
ume upon receiving News or Traffic information. The info volume can be controlled by turning the VOL knob left/right while a news or traffic broadcast is playing. AF, Region, and News are RDS Radio menus. 53 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 54 Ensemble Press the FOLDER FOLDER
, key Preset SEEK Press the 1
~
6 key
Search the Ensemble. Use the Tune knob to select the desired Ensemble and select stations with-
in the Ensemble.
Shortly pressing the key (under 0.8 seconds): Plays the station saved in the corresponding key.
Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the currently playing station to the selected key and sound a BEEP.
~
1 6 Audio system DAB RADIO
(for DAB model) RADIO may differ depending on the selected audio. Changing RADIO mode RADIO Press the Key to change the mode in order of FM1 FM2 FMA DAB1 DAB2 AM. SEEK Press the
Shortly pressing the key (under 0.8 key TRACK SEEK
, seconds): Changes the station.
Press and hold the key (over 0.8 seconds): Change the Ensemble. 54 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 55 Audio system SCAN Press the
Shortly pressing the key (under 0.8 TA/SCAN key seconds): TA On/Off
Pressing and holding the key(over 0.8 seconds): The broadcast sta-
tion increases and previews each broadcasts for 5 seconds each. After scanning all stations, returns and plays the current broadcast station. Selecting through manual search Turn the select the station. TUNE knob left/right to key. MENU key Set [
L-
TUNE knob or L-Band Press the Band] through 2 RDM DAB Broadcasts include BAND III and L-BAND according the Range. BAND III is always set as the default while the L-BAND feature can be turned on to search for L-BAND broadcasts when in regions where L-
BAND broadcasts are available. to MENU Within key are the Service.F
(Service Following) And L-Band functions. MENU key. Set [
key TUNE knob or Service Following Press the MENU Service.F] through 1 RPT When the DAB signal is weak, the Service Following feature will auto-
matically convert to the identical FM broadcast when such a broadcast is available. 55 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 56 key SCAN SCAN Press the
Shortly pressing the key (under 0.8 seconds): The broadcast frequen-
cy increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency.
Pressing and holding the key (over 0.8 seconds): Previews the broad-
casts saved in Preset for 5 seconds each.
~
1 6 Preset SEEK Press the 1
Shortly pressing the key (under 0.8 seconds): Plays the frequency saved in the corresponding key. key
~
6
Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the currently playing broadcast to the selected key and sound a BEEP.
~
1 6 Audio system RADIO RADIO may differ depending on the selected audio. Changing RADIO mode Changing RADIO mode
, SEEK TRACK key SEEK Press the
Shortly pressing the key (under 0.8 seconds): Changes the frequency.
Pressing and holding the key (over 0.8 seconds): Automatically search-
es for the next frequency. 56 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 57 Audio system Selecting through manual search Turn the adjust the frequency. TUNE knob left/right to MENU Within Store) and Info functions. MENU key are the AST (Auto 1 RPT MENU TUNE knob or AST (Auto Store) Press the key Set [ AST]
through key. Select AST(Auto Store) to save fre-
quencies with superior reception to
. If no frequen-
presets cies are received, then the most recently received frequency will be broadcast.
~
1 6 57 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 58 1 RPT Repeat While song (file) is playing
(RPT) key Audio CD, MP3 CD, USB, iPod, My Music mode: RPT on screen
To repeat one song (Shortly press-
ing the key (under 0.8 seconds)):
Repeats the current song. MP3 CD, USB mode: FLD.RPT on screen
To repeat folder (pressing twice):
repeats all files within the current folder. Press the off repeat. 1 RPT key again to turn Audio system BASIC METHOD OF USE :
Audio CD / MP3 CD / USB /
iPod / My Music MEDIA Press the key to change the mode in order of CD USB(iPod) AUX My Music BT Audio. The folder/file name is displayed on the screen.
<USB>
<My Music>
<Audio CD>
The CD is automatically played when a CD is inserted. The USB music is automatically played when a USB is connected.
<MP3 CD>
58 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 59 Audio system Changing Song/File While song (file) is playing key
Shortly pressing the key: Plays the TRACK current song from the beginning. TRACK If the key is pressed again within 1 second, the previous song is played.
Pressing and holding the key (over 0.8 seconds): Rewinds the song. SEEK While song (file) is playing key
Shortly pressing the key : Plays the next song.
Pressing and holding the key (over 0.8 seconds): Fast forwards the song. 2 RDM Random While song (file) is playing
(RDM) key Audio CD, My Music mode: RDM on screen
Random (Shortly pressing the key): Plays all songs in random order. MP3 CD, USB mode: FLD.RDM on screen
Folder Random (Shortly pressing the key): Plays all files within the current folder in random order. MP3 CD, USB mode: RDM on screen
Random (pressing twice): Plays all files in random order. iPod mode: RDM on screen
Random (Shortly pressing the key): Plays all files in random order. Press the off random. 2 RDM key again to turn Scan (for RDS model)
Pressing and holding the TA/SCAN key (over 0.8 seconds) : Scans all songs for 10 seconds starting from the next song. Pressing TA/SCAN and holding the key again to turn off. Scan
Shortly pressing the the SCAN key : Scans all songs from the next song for 10 seconds each. Press the turn off. SCAN key again to The SCAN function is not support-
ed in iPod mode. 59 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 60 Audio system Folder Search : MP3 CD, USB Mode While
(Folder Up) key is playing FOLDER file MENU : Audio CD Press the Audio CD mode MENU key to set the Repeat, Random, Information features.
, MENU key Set [
TUNE knob or Information Press the through the key to display information of the cur-
rent song. Press the info display. key to turn off Info]
3 MENU
Searches the next folder. While file is playing Down) key FOLDER
(Folder
Searches the parent folder. If a folder is selected by pressing the TUNE knob, the first file within the selected folder will be played. Searching Songs (File)
Turning TUNE knob : Searches for songs (files)
Pressing TUNE knob : Plays selected song (file). 60 MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn off. key Set [ RPT]
1 RPT MENU Random Press the key Set [ RDM]
through the 2 RDM key to randomly play songs within the CD Press RDM again to turn off. TUNE knob or MENU : MP3 CD / USB Press the MP3 CD mode key to set the Repeat, Folder Random, Folder Repeat, All Random, Information, and Copy features. MENU MENU Repeat Press the TUNE knob or through the key to repeat the current song. Press RPT again to turn off. key Set [ RPT]
1 RPT K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 61 Audio system the Folder Random Press MENU F.RDM] through the or within the current folder. Press F.RDM again to turn off. TUNE knob key to randomly play songs key Set 2 RDM
[
the MENU All Random Press A.RDM] through the or songs within the CD / USB. Press A.RDM again to turn off. TUNE knob key to randomly play all key Set 4
[
key Set [ F.RPT]
Folder Repeat Press the MENU through the key to repeat songs within the cur-
rent folder. Press F.RPT again to turn off. TUNE knob or 3 MENU key Set [
TUNE knob or Information Press the through the key to display information of the cur-
rent song. Press the info display. key to turn off Info]
5 MENU 6 MENU TUNE knob or key Set [ Copy]
Copy (if equipped) Press the through the key. This is used to copy the current song into My Music. You can play the copied Music in My Music mode. If another key is pressed while copying is in progress, a pop up asking you whether to cancel copying is displayed. If another media is connected or inserted (USB, CD, iPod, AUX) while copying is in progress, copy-
ing is canceled. Music will not be played while copying is in progress. 61 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 62 Audio system key Set
[
TUNE knob the MENU Search Press Search] through the or Displays iPod category list. Searching iPod key. 4 is key pressed, move to par-
category MENU ent category. MENU key Set [ RDM]
Random Press the through the key. Plays all songs within the currently playing category in random order. Press RDM again to turn off. TUNE knob or 2 MENU key Set [
TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]
3 MENU MENU : iPod In iPod mode, press the to set Information and Search features. key the Repeat, Random, MENU MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn repeat key Set [ RPT]
1 RPT off. 62 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 63 Audio system MENU : My Music Mode
(if equipped) In My Music mode, press the MENU key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. MENU Repeat Press the through the key. Repeats the currently playing song. Press RPT again to turn repeat off. key Set [ RPT]
1 RPT TUNE knob or MENU Random Press the through the key. Plays all songs in random order. Press RDM again to turn random key Set [ RDM]
2 RDM TUNE knob or off. MENU key Set [
TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]
3 MENU MENU Delete Press the through the key.
Deletes currently playing file TUNE knob or key Set [ Delete]
4 In the play screen, pressing delete will delete the currently playing song.
Deletes file from list Select the file you wish to delete by using the TUNE knob. MENU Press the key and select the delete menu to delete the selected file. 63 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 64 Audio system MENU Delete All Press the through the key. Deletes all songs of My Music. TUNE knob or key Set [ Del.All]
5 the key Set Delete Selection Press MENU Del.Sel] through the or Songs within My Music are selected and deleted. Select the songs you wish to TUNE knob key. 6
[
delete from the list. 64 After selecting, press the MENU key and select the delete menu. NOTICE - USING THE My Music Even if memory is available, a maximum of 6,000 songs can be stored. The same song can be copied up to 1,000 times. Memory info can be checked in the System menu of Setup. AUX AUX is used to play external MEDIA currently connected with the AUX terminal. AUX mode will automatically start when an external device is connect-
ed with the AUX terminal. If an external device is connected, you can also press the key to change to AUX mode. MEDIA AUX mode cannot be started unless there is an external device connected to the AUX terminal. NOTICE - USING THE AUX Fully insert the AUX cable into the AUX terminal for use. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 65 BluetoothWireless Technology AUDIO Type A-1, Type A-3, Type A-5 What is BluetoothWireless Technology?
Bluetooth Wireless Technology allows devices to be connected in a short distance, including hands-free devices, stereo headsets, wireless remote controllers, etc. For more information, visit the Bluetooth Wireless Technology website at www.Bluetooth.com Before using Bluetooth Wireless Technology audio features
Bluetooth Wireless Technology audio may not be supported depending on the compatibility of your Wireless Technology mobile phone. Bluetooth
In order to use Bluetooth Wireless Technology audio, you must first pair and connect the Bluetooth Wireless Technology mobile phone.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth enabled cell phone is required to use BluetoothWireless Technology. WARNING Driving while distracted can result in a loss of vehicle con-
trol that may lead to an acci-
dent, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle sys-
tems which take the drivers eyes, attention and focus away from the safe operation of a vehicle or which are not permis-
sible by law should never be used during operation of the vehicle. Audio system
Bluetooth Wireless Technology audio can be used only when the
[Audio Streaming] of Phone is turned On. 65 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:04 AM Page 66 Audio system The previous song / next song /
play / pause functions may not be supported some mobile phones. in Starting BluetoothWireless Technology Audio
Press the key to change the mode in order of CD USB AUX My Music BT Audio. MEDIA
If BT Audio is selected, Bluetooth Wireless Technology audio will start playing. Audio may not automatically start playing in some mobile phones. Using the Bluetooth Wireless Technology audio features
Play / Pause Press the pause the current song. TUNE knob to play and
(for Colombia model) 66 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 67 PHONE (if equipped) Making a call using the Steering-wheel mount controls Before using the Bluetooth Wireless Technology phone features
In order to use Bluetooth Wireless Technology phone, you must first pair and connect the Bluetooth Wireless Technology mobile phone.
If the mobile phone is not paired or connected, it is not possible to enter Phone mode. Once a phone is paired or connected, the guid-
ance screen will be displayed.
If Priority is set upon vehicle igni-
tion (IGN/ACC ON), the Bluetooth Wireless Technology phone will be automatically connected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically connected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology phone connec-
tion, set the Bluetooth Wireless Technology power to OFF.
(1) button :
Mute the microphone during a call.
(2)
+
,
-
button :
Raises or lowers speaker volume.
(3) button :
Places and transfers calls.
(4) button :
Ends calls or cancels functions. Audio system
Check call history and making call Shortly press (under 0.8 seconds) key on the steering the remote controller. The call history list will be dis-
played on the screen. Press the key again to con-
nect a call to the selected number.
Redialing the most recently called number Press and hold (over 0.8 seconds) key on the steering the remote controller. The most recently called number is redialed. 67 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 68
Check call history and making call Shortly press (under 0.8 seconds) key on the steering the remote controller. The call history list will be dis-
played on the screen. Press the key again to con-
nect a call to the selected number.
Redialing the most recently called number Press and hold (over 0.8 seconds) key on the steering the remote controller. The most recently called number is redialed. Audio system Making a call using the Steering-wheel mount controls
(VOICE RECOGNITION equipped model)
(1) button :
Activates voice recognition.
(2)
+
,
-
button :
Raises or lowers speaker volume.
(3) button :
Places and transfers calls.
(4) button :
Ends calls or cancels functions. 68 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 69 Audio system Phone MENU Type A-1, Type A-3 PHONE Press the key to display three menus (Call History, Phone Book, Phone Setup). key. key Set [ P. TUNE knob or P.Book Press the PHONE Book] through the 2 RDM The phone book is displayed and can be used to select a number and make a call. If more than one number is saved to one contact, then a screen showing the mobile phone num-
ber, Home and office number is displayed. Select the desired num-
ber to make the call. PHONE Setup]
key Set [
TUNE knob or Setup Press the through the key. The Bluetooth Wireless Technology mobile phone setup screen is dis-
played. For more information, refer to Phone Setup. 3
[
1 RPT key. the key Set TUNE knob History Press PHONE History] through the or The call history is displayed and can be used to select a number and make a call. If call history does not exist, a screen asking whether to download call his-
tory is displayed. (The download fea-
ture may not be supported in some mobile phones) If phone book do not exist, a screen asking whether to down-
load phone book is displayed. (The download feature may not be sup-
ported in some mobile phones) 69 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 70 If phone book do not exist, a screen asking whether to down-
load phone book is displayed. (The download feature may not be sup-
ported in some mobile phones) PHONE Setup]
key Set [
TUNE knob or Setup Press the through the key. The Bluetooth Wireless Technology mobile phone setup screen is dis-
played. For more information, refer to Phone Setup. 4 Audio system Phone MENU Type A-5
(for Colombia model) PHONE Press the key to display three menus (Call History, Phone Book, Phone Setup). PHONE key Set [
FAV Press the through the key. Up to 20 frequently used contacts saved for easy access TUNE knob or FAV]
1 RPT 70
[
2 RDM key. the key Set TUNE knob History Press PHONE History] through the or The call history is displayed and can be used to select a number and make a call. If call history does not exist, a screen asking whether to download call his-
tory is displayed. (The download fea-
ture may not be supported in some mobile phones)
[
3 key. the PHONE key Set TUNE knob Contacts Press Contacts] through the or The phone book is displayed and can be used to select a number and make a call. If more than one number is saved to one contact, then a screen showing the mobile phone num-
ber, Home and office number is displayed. Select the desired num-
ber to make the call. K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 71 Audio system Phone MENU Type A-5 PHONE Press the three menus (Call History, Contacts, Phone Setup). key to display
[
1 RPT key. the key Set TUNE knob History Press PHONE History] through the or The call history is displayed and can be used to select a number and make a call. If call history does not exist, a screen asking whether to download call his-
tory is displayed. (The download fea-
ture may not be supported in some mobile phones)
[
2 RDM key. the PHONE key Set TUNE knob Contacts Press Contacts] through the or The phone book is displayed and can be used to select a number and make a call. If more than one number is saved to one contact, then a screen showing the mobile phone num-
ber, Home and office number is displayed. Select the desired num-
ber to make the call. PHONE Setup]
key Set [
TUNE knob or Setup Press the through the key. The Bluetooth Wireless Technology mobile phone setup screen is dis-
played. For more information, refer to Phone Setup. 3 If phone book do not exist, a screen asking whether to down-
load phone book is displayed. (The download feature may not be sup-
ported in some mobile phones) 71 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 72 Audio system NOTICE - USING THE Some Bluetooth BluetoothWireless Technology CELLULAR PHONE Do not use a cellular phone or per-
form Wireless Technology settings (e.g. pairing a phone) while driving. Bluetooth Wireless Technology -enabled phones may not be recognized by the system or fully compatible with the system. Before using Bluetooth Wireless Technology related features of the audio system, refer your phones Users Manual for phone-side Bluetooth Wireless Technology operations. The phone must be paired to the audio system to use Bluetooth Wireless Technology related fea-
tures. You will not be able to use the hands-free feature when your phone (in the car) is outside of the cellular service area (e.g. in a tun-
nel, in a underground, in a moun-
tainous area, etc.).
( Continued) 72
( Continued) If the cellular phone signal is poor or the vehicles interior noise is too loud, it may be difficult to hear the other persons voice during a call. Do not place the phone near or inside metallic objects, otherwise communications with Bluetooth Wireless Technology system or cel-
lular service stations can be dis-
turbed. is connected through Bluetooth Wireless Technology your phone may dis-
charge quicker than usual for additional Bluetooth Wireless Technology-related operations. While a phone Some cellular phones or other devices may cause interference noise or malfunction to audio sys-
tem. In this case, store the device in a different location may resolve the condition. Phone contact names should be saved in English or they may not be displayed correctly.
( Continued) ON),
( Continued) If Priority is set upon vehicle igni-
the tion(IGN/ACC Bluetooth Wireless Technology phone will be automatically con-
nected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically con-
nected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology connection, turn the Bluetooth Wireless Technology feature off. The hands-free call volume and quality may differ depending on the mobile phone type. Bluetooth Wireless Technology features can be used only when the mobile phone has been paired and connected with the device. For more information on pairing and connecting Bluetooth Wireless Technology enabled mobile phones, refer to the Phone Setup section.
( Continued) K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 73 Audio system
( Continued) When a Bluetooth Wireless Technology mobile phone is con-
) icon will appear at nected, a (
the top of the screen. If a (
) icon is not displayed, this indicates that a Bluetooth Wireless Technology enabled device has not been con-
nected. You must connect the device before use. For more infor-
mation on Bluetooth Wireless Technology mobile phones, refer to the Phone Setup section. a connecting Bluetooth Wireless Technology enabled mobile phone will work only when the Bluetooth Wireless Technology option within your mobile phone has been turned on.
(Methods of the Bluetooth Wireless Technology enabled feature may differ depending on the mobile phone.)
( Continued) turning on and Pairing
( Continued) In some mobile phones, starting the ignition while talking through Bluetooth Wireless Technology enabled handsfree call will result in the call becoming disconnected.
(Switch the call back to your mobile phone when starting the ignition.) in Some features may not be sup-
some Bluetooth ported Wireless Technology mobile phone and devices. Bluetooth Wireless Technology enabled operation may be unsta-
ble depending on the communica-
tion state. Placing the audio system within an electromagnetic environment may result in noise interference. 73 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 74 Audio system NOTICE - USING VOICE COM-
MAND The voice recognition feature of this product supports recognition of the commands listed within this users manual. While using voice recognition, operating the steering remote con-
trol or the device will terminate voice recognition and allow you to manually operate desired func-
tions. Position the microphone above the head of the drivers seat. For supe-
rior performance, maintain good posture when saying voice com-
mands.
(Continued)
(Continued) Voice recognition may not func-
tion properly due to outside noise. The following conditions can affect the performance of Voice Recognition:
-When the windows and sunroof are open
-When the heating/cooling system is on
-When passing a tunnel
-When driving on rugged and uneven roads After downloading Bluetooth Wireless Technology phone book, the system requires some times to convert the phone book into voice information. During this time, voice recognition may not operate properly. Upon inputting your phone book, special symbols and numbers can-
not be recognized by voice. For example, # John Doe%& will be recognized as John Doe. 74 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 75 VOICE COMMAND
(if equipped) Starting Voice Command
To start voice command, shortly key on the steering press the wheel remote controller.
If voice command is in [Normal Mode], then the system will say Please say a command. Beep If voice command is in [Expert Mode], then the system will only say a Beep-
Skipping the Guidance Message While the guidance message is being stated, shortly press the key (under 0.8 seconds) to discontin-
ue the guidance message and sound the beep. After the beep, say the voice com-
mand. Setting Voice command [Normal the PHONE Mode]/[Expert Mode]:
key Select Press TUNE
[System] through the key Select [VRS knob or Mode]
TUNE knob Set [Normal Mode]/[Expert Mode]
through the 4
Say the voice command. NOTICE For proper voice recognition, say the voice command after the guidance message and the Beep sound. Audio system Ending Voice Command
While using voice command, press key (over 0.8 sec-
and hold the onds) to end voice command.
While using voice command, press-
ing the steering wheel remote con-
troller or a different key will end voice command.
In a state where the system is wait-
ing for your voice command, say cancel or end to end voice com-
mand.
In a state where the system is wait-
ing for your voice command, short-
ly press the key (under 0.8 sec-
onds) to end voice command. 75 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 76 Audio system Illustration on using voice commands
Starting voice command.
End voice command. Shortly pressing the key (under 0.8 seconds):
Shortly pressing the key (under 0.8 seconds):
Beep-
Please say a command Beep-
Phone book More Help More Help. You can say Radio, FM, AM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Phone book. Please say a command. Phone book Please say the name of the Phone book you want to call. Cancel
Skipping Voice Recognition Shortly pressing the key (under 0.8 seconds):
Beep Beep.. (end beep) Please say a... while guidance message is being stated Shortly pressing the
(under 0.8 seconds) Beep-
key More Help More Help. You can say Radio, FM, AM, Media, CD, USB, Aux, My Music, iPod, Bluetooth Audio, Phone, Call History or Phone book. Please say a command. 76 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 77 Audio system Voice Command List
Common Commands: These commands can be used in most operations. (However a few commands may not be available during certain operations) Command More Help Function Help Call<Name>
Phone Call History Phone book Dial Number Redial Radio Provides guidance on commands that can be used anywhere in the system. Provides guidance on commands that can be used within the current mode. Calls <Name> saved in phone book Ex) Call John Smith Provides guidance on Phone related com-
mands. After saying this command, say Call History, Phone book, Dial Number to exe-
cute corresponding functions. Displays the Call History screen. Displays the phone book screen. After saying this command, say the name of a phone book saved in the phone book to automatically con-
nect the call. Displays the Dial number screen. After saying this command, you can say the number that you want to call. Connects the most recently called number.
When listening to the radio, displays the next radio screen. (FM1FM2FMAAMAMA)
When listening to a different mode, displays the most recently played radio screen. Command FM FM1(FM One) FM2(FM Two) FMA AM AMA FM Preset 1~6 AM Preset 1~6 FM 87.5~107.9 AM 530~1710 Function
When currently listening to the FM radio, maintains the current state.
When listening to a different mode, displays the most recently played FM screen. Displays the FM1 screen. Displays the FM2 screen. Displays the FMA screen. Displays the AM screen. Displays the AMA screen. Plays the most recently played broadcast saved in FM Preset 1~6. Plays the broadcast saved in AM Preset 1~6. Plays the FM broadcast of the corresponding frequency. Range can be different by application frequency of corresponding country. Plays the AM broadcast of the corresponding frequency. Range can be different by application frequency of corresponding country. TA on TA off News on News off Enables Traffic Announcement Disables Traffic Announcement Enables RDS News feature Disables RDS News feature 77 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 78 Audio system Command Media Play Track 1~30 CD Search CD Function Moves to the most recently played media screen. If a music CD has been inserted, plays the corresponding track. Plays the music saved in the CD. Moves to the CD track or file selection screen.
For audio CDs, move to the screen and say the track number to play the corresponding track. Command AUX (Auxiliary) Bluetooth Audio Plays Plays the connected external device. the music saved in connected Function Mute Pardon?
Cancel (Exit) BluetoothWireless Technology device. Mutes the radio or music volume. Repeats the most recent comment. Ends voice command. USB Search USB iPod Search iPod
Moves to MP3 CD file selection screen. After manually operate the device to select and play music. Plays USB music. Moves to USB file selection screen. After manually operate the device to select and play music. Plays iPod music. Moves to the iPod file selection screen. After, manually operate the device to select and play music. Plays the music saved in My Music. My Music Search My Music Moves to My Music file selection screen. After manually operate the device to select and play music. 78 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 79
FM/AM radio commands: Commands available during FM, AM radio operation.
Audio CD commands: Commands available during Audio CD operation. Audio system Command Random Random Off Repeat Repeat Off Next Track Previous Track Scan Track 1~30 Information Function Randomly plays the tracks within the CD. Cancels random play to play tracks in sequen-
tial order. Repeats the current track. Cancels repeat play to play tracks in sequen-
tial order. Plays the next track. Plays the previous track. Scans the tracks from the next track for 10 seconds each. Plays the desired track number. Displays the information screen of the current track. Command Preset 1~6 Auto Store Function Plays the broadcast saved in Preset 1~6. Automatically selects radio broadcast fre-
quencies with superior reception and saves in Presets 1~6. Preset Save 1~6 Saves the current broadcast frequency to Seek up Seek down Next Preset Previous Preset Scan Preset Scan AF on AF off Region Region off Preset 1~6. Plays the next (higher) receivable broadcast. Plays the previous (lower) receivable broadcast. Selects the preset number next to the most recently selected preset. (Example: When cur-
rently listening to preset no. 3, then preset no. 4 will be selected.) Selects the preset number previous to the most recently selected preset. (Example:
When currently listening to preset no. 3, then preset no. 2 will be selected.) Scans receivable frequencies from the current broadcast and plays for 10 seconds each. Moves to the next preset from the current present and plays for 10 seconds each. Enables Alternative Frequency feature Disables Alternative Frequency feature Enables Region feature Disables Region feature 79 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 80 Audio system
MP3 CD / USB commands: Commands available dur-
ing USB and MP3 CD operation.
iPod Commands: Commands available during iPod operation. Command Random All Random Random Off Repeat Folder Repeat Repeat Off Next File Previous File Scan Information Copy Function Randomly plays the files within the current folder. Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Repeats all files in the current folder. Cancels repeat play to play files in sequential order. Plays the next file. Plays the previous file. Scans the files from the next files for 10 sec-
onds each. Displays the information screen of the current file. Copies the current file into My Music. Command All Random Random Random Off Repeat Repeat Off Next Song Previous Song Information Function Randomly plays all saved songs. Randomly plays the songs within the current category. Cancels random play to play songs in sequen-
tial order. Repeats the current song. Cancels repeat play to play songs in sequen-
tial order. Plays the next song. Plays the previous song. Displays the information screen of the current song. 80 K_UM_IQS_AB3.0[EU,Colombia,GE]AUDIO_C5MS2G3U01_V7.0:YF eng 4c-Audio.qxd 4/6/2015 9:05 AM Page 81
My Music Commands: Commands available during My Music operation.
Commands available during Bluetooth Wireless Technology audio streaming from mobile phone oper-
ation Command Operation. Audio system Command Play Pause Function Plays the currently paused song. Pauses the current song. Command Random Random Off Repeat Repeat Off Next File Previous File Scan Information Delete Delete All Function Randomly plays all saved files. Cancels random play to play files in sequential order. Repeats the current file. Cancels repeat play to play files in sequential order. Plays the next file. Plays the previous file. Scans the files from the next files for 10 sec-
onds each. Displays the information screen of the current file. Deletes the current file. You will bypass an additional confirmation process. Deletes all files saved in My Music. You will bypass an additional confirmation process. 81 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-05-13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-05-13
|
||||
1 | Applicant's complete, legal business name |
HYUNDAI MOBIS CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0014195663
|
||||
1 | Physical Address |
203, Teheran-ro
|
||||
1 |
Seoul, N/A 135-977
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TQ8
|
||||
1 | Equipment Product Code |
AM110D9GG
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S****** C****
|
||||
1 | Title |
Senior Engineer
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
c******@mobis.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/09/2015 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DIGITAL CAR AUDIO SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS KOREA CO., Ltd.
|
||||
1 | Name |
J**** J******
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
j******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0022100 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC