all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.66 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual | Users Manual | 1.66 MiB |
How vehicle audio works FM reception This can be due to factors, such as the distance from the radio station, closeness of other strong radio sta-
tions or the presence of buildings, bridges or other large obstructions in the area. JBM001 AM and FM radio signals are broad-
cast from transmitter towers located around your city. They are intercept-
ed by the radio antenna on your vehi-
cle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehi-
cle may not be strong and clear. Features of your vehicle AM (MW, LW) reception JBM002 AM broadcasts can be received at greater distances than FM broad-
casts. This is because AM radio waves are transmitted at low fre-
quencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around obstruc-
tions so that they can provide better signal coverage. 4 1 Features of your vehicle FM radio station JBM003 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are eas-
ily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble:
JBM004
Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station.
Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can dis-
turb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears. JBM005
Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.
Multi-Path Cancellation - Radio signals being received from sever-
al directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close fre-
quencies. If this occurs, select another station until the condition has passed. 24 WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Using a cellular phone or a two-
way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equip-
ment. CAUTION When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted. When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehi-
cle's electrical system and adversely affect safe operation of the vehicle. Features of your vehicle Caring for disc
If the temperature inside the car is too high, open the car windows to ventilate before using the system.
It is illegal to copy and use MP3/WMA files without permis-
sion. Use CDs that are created only by lawful means.
Do not apply volatile agents, such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs.
To prevent the disc surface from getting damaged, hold CDs by the edges or the center hole only.
Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).
Do not damage the disc surface or attach pieces of sticky tape or paper.
Make certain only CDs are insert-
ed into the CD player (Do not insert more than one CD at a time).
Keep CDs in their cases after use to protect them from scratches or dirt. 4 3 NOTE:
Order of playing files (folders) :
1. Song playing order :
to sequentially. 2. Folder playing order :
If no song file is contained in the folder, that folder is not dis-
played. Features of your vehicle
Depending on the type of CD-
R/CD-RW CDs, certain CDs may not operate normally according to manufacturing companies or mak-
ing and recording methods. In such circumstances, continued use may cause malfunctions to your audio system. NOTICE - Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with international audio CD standards (Red Book), may not play on your car audio. Please note that inabilities to properly play a copy protected CD may indicate that the CD is defective, not the CD player. 44 WARNING
Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents.
Do not disassemble, assem-
ble, or modify the audio sys-
tem. Such acts could result in accidents, fire, or electric shock.
Using the phone while driving may lead to a lack of attention of traffic conditions and increase the likelihood of accidents. Use the phone fea-
ture after parking the vehicle.
Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.
(Continued)
(Continued)
Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-
function. Continued use in such conditions could lead to accidents(fires, electric shock) or product malfunc-
tions.
Do not touch the antenna dur-
ing thunder or lightening as such acts may lead to light-
ning induced electric shock.
Do not stop or park in park-
ing-restricted areas to operate the product. Such acts could lead to traffic accidents. ignition
Use the system with the vehi-
cle turned on. Prolonged use with the igni-
tion turned off could result in battery discharge. Features of your vehicle CAUTION
Operating the device while driving could lead to acci-
dents due to a lack of atten-
tion to external surroundings. First park the vehicle before operating the device.
Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to acci-
dents.
Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.)
(Continued) 4 5 Features of your vehicle
(Continued)
If you want to change the posi-
tion of device installation, please inquire with your place of purchase or service mainte-
nance center. Technical expertise is required to install or disassemble the device.
Turn on the car ignition before using this device. Do not oper-
ate the audio system for long periods of time with the igni-
tion turned off as such opera-
tions may lead to battery dis-
charge.
Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.
(Continued) 64
(Continued)
When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, benzene, thinners, etc.) as such materials may damage the device panel or cause color/quality deterioration
Do not place beverages close to the audio system. Spilling beverages may lead to system malfunction.
In case of product malfunc-
tion, please contact your place of purchase or After Service center.
Placing the audio system with-
in an electromagnetic environ-
ment may result in noise inter-
ference. NOTICE - USING THE USB DEVICE To use an external USB device, make sure the device is not con-
nected when starting up the vehi-
cle. Connect the device after start-
ing up. If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. The System may not play inau-
thentic MP3 or WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps ~ 320Kbps. 2) It can only play WMA music files with the compression rate between 8Kbps ~ 320Kbps. Take precautions for static elec-
tricity when connecting or discon-
necting the external USB device. An encrypted MP3 PLAYER is not recognizable.
(Continued)
(Continued) Depending on the condition of the external USB device, the connect-
ed external USB device can be unrecognizable. When the formatted byte/sector setting of External USB device is not or 2048BYTE, then the device will not be recognized. 512BYTE either Use only a USB device formatted to FAT 12/16/32. USB devices without USB I/F authentication may not be recog-
nizable. Make sure the USB connection terminal does not come in contact with the human body or other objects. If you repeatedly connect or dis-
connect the USB device in a short period of time, it may break the device. You may hear a strange noise when connecting or disconnecting a USB device.
(Continued)
(Continued) If you disconnect the external USB device during playback in USB mode, the external USB device can be damaged or may malfunction. Therefore, disconnect the external USB device when the audio is turned off or in another mode.
(e.g, Radio, CD) Depending on the type and capac-
ity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device. Do not use the USB device for pur-
poses other than playing music files. Playing videos through the USB is not supported. Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble.
(Continued) Features of your vehicle
(Continued) If you use devices such as a USB hub purchased separately, the vehicles audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia termi-
nal of the vehicle. If the USB device is divided by log-
ical drives, only the music files on the highest-priority drive are rec-
ognized by car audio. Devices such as MP3 Player/
Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. Charging through the USB may not be supported in some mobile devices. USB HDD or USB types liable to connection failures due to vehicle vibrations are not supported. (i-
stick type) Some non-standard USB devices
(METAL COVER TYPE USB) can be unrecognizable.
(Continued) 4 7 Features of your vehicle
(Continued) Some USB flash memory readers
(such as CF, SD, micro SD, etc.) or external-HDD type devices can be unrecognizable. Music files protected by DRM
(DIGITAL RIGHTS MANAGE-
MENT) are not recognizable. The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device. Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products. 84 NOTICE - USING THE iPod DEVICE Some iPod models may not sup-
port communication protocol and files may not properly play. Supported iPod models:
- iPhone 3GS/4
- iPod touch 1st~4th generation
- iPod nano 1st~6th generation
- iPod classic The order of search or playback of songs in the iPod can be different from the order searched in the audio system. If the iPod disabled due to its own iPod. malfunction, reset
(Reset: Refer to iPod manual) the An iPod may not operate normal-
ly on low battery.
(Continued)
(Continued) Some iPod devices, such as the iPhone, can be connected through the Bluetooth Wireless Technology interface. The device must have Bluetooth audio Wireless Technology capability (such as for headphone Bluetooth stereo Wireless Technology ). The device can play, but it will not be con-
trolled by the audio system. To use iPod features within the audio, use the cable provided upon purchas-
ing an iPod device. Skipping or improper operation may occur depending on the characteris-
tics of your iPod/Phone device. If your iPhone is connected to both the Bluetooth Wireless Technology and USB, the sound may not be prop-
erly played. In your iPhone, select the Dock connector or Bluetooth Wireless Technology to change the sound output (source).
(Continued)
(Continued) When connecting iPod with the iPod Power Cable, insert the con-
nector to the multimedia socket completely. If not inserted com-
pletely, communications between iPod and audio may be interrupted. When adjusting the sound effects of the iPod and the audio system, the sound effects of both devices will overlap and might reduce or distort the quality of the sound. Deactivate (turn off) the equalizer function of an iPod when adjust-
ing the audio systems volume, and turn off the equalizer of the audio system when using the equalizer of an iPod. When not using iPod with car audio, detach the iPod cable from iPod. Otherwise, iPod may remain in accessory mode, and may not work properly. Features of your vehicle 4 9 Features of your vehicle CD Player 4 10 UMA44001N SYSTEM CONTROLLERS AND FUNCTIONS Display and settings may differ depending on the selected audio. Audio Head Unit
(for RDS model) RADIO 2.
Changes to FM/AM mode.
Each time the key is pressed,the mode is changed in order of FM1 FM2 FMA AM AMA. MEDIA 3.
Changes to CD, USB(iPod), AUX, My Music, BT Audio mode.
Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music, BT Audio. 4.
(for Bluetooth Wireless PHONE Technology equipped model)
Operates Phone Screen When a phone is not connected, the connection screen is displayed. 1.
Ejects the disc.
(EJECT) Features of your vehicle 5. PWR/VOL knob
Power Knob: Turns power On/Off by pressing the knob
Volume Knob: Sets volume by turning the knob left/right 4 11 Features of your vehicle 6 1
~
(Preset) 8.
Radio Mode: Saves frequencies
(channels) or receives saved fre-
quencies (channels) 1 RPT 2 RDM
: Repeat
: Random
CD, USB, iPod, My Music mode
-
-
In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. 9.
Each time the button is shortly pressed (under 0.8 seconds), sets screen Off Screen On Screen Off Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. TA/SCAN 10.
Radio Mode
- Shortly press the key (under 0.8 seconds): TA On/Off
- Press and hold the key (over 0.8 seconds): Previews each broad-
cast for 5 seconds each
Media mode
- Press and hold the key (over 0.8 seconds): Previews each song
(file) for 10 seconds each Press and holding the key again to continue listening to the current song (file). SETUP 11.
Moves to the Display, Sound, Phone and System setting mode. MEMU 12.
`Displays menus for the current m ode. SEEK TRACK 6.
Radio Mode : Automatically search-
es for broadcast frequencies.
CD, USB, iPod, My Music modes
- Shortly press the key (under 0.8 seconds): Moves to next or previ-
ous song (file)
- Press and hold the key (over 0.8 seconds): Rewinds or fast-for-
wards the current song. PTY FOLDER 7.
FM : RDS Program Type Search
CD MP3, USB mode : Folder Search 4 12 TUNE knob 13.
Radio mode : Changes frequency by turning the knob left/right
CD, USB, iPod, My Music mode:
Searches .songs (files) by turning the knob left/right When the desired song is dis-
played, press the knob to play the song.
Moves focus in all selection menus and selects menus Features of your vehicle 4 13 Features of your vehicle SETUP (for RDS model) Display Settings SETUP key Select TUNE knob or key Select menu through the Press
[Display] through 1 RPT TUNE knob Sound Settings ON
. SETUP key Select TUNE knob or key Select menu through the Press
[Sound] through 2 RDM TUNE knob Mode Pop up
[Mode Pop up] Changes selection mode
During On state, press the RADIO key to display the mode MEDIA or change pop up screen. Scroll text
[Scroll text] Set
OFF ON
: Maintains scroll
: Scrolls only one (1) time. ON
/
OFF Song Info When playing an MP3 file, select the desired display info from Folder/File or Album/Artist/Song. XMA44004T, XMA44005T XMA44001T, XMA44002T XMA44003T 4 14 Audio Settings This menu allows you to set the Bass, Middle, Treble and the Sound Fader and Balance. Select menu through Select TUNE knob Turn
[Audio Settings]
TUNE knob left/right to set
Bass, Middle, Treble : Selects the sound tone.
Fader, Balance : Moves the sound fader and balance.
Default : Restores default settings. Return : While adjusting values, TUNE knob will re-pressing the restore the parent menu. Features of your vehicle Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set in 4 levels [Off/Low/Mid/High] of TUNE knob Virtual Sound The PowerBass, PowerTreble, and Surround can be set. Select [Virtual Sound] Set menu through
/
OFF
PowerBass : This is a sound sys-
tem feature that provides live bass.
PowerTreble : This is a sound system TUNE knob Set TUNE knob through ON feature that provides live tremble.
Surround : This is a sound system that provides surround feature sound. XMA44008T, XMA44009T XMA44010T XMA44006T, XMA44007T May differ depending on selected audio. the 4 15 Pairing completion is displayed. In some mobile phones, pairing will automatically be followed by connection. It is possible to pair up to five Bluetooth Wireless Technology enabled mobile phones. Features of your vehicle Phone Setup
(BluetoothWireless Technology equipped model) Pair Phone CAUTION To pair a Bluetooth Wireless Technology enabled mobile phone, authentication and con-
nection processes are first required. As a result, you can-
not pair your mobile phone while driving the vehicle. First park your vehicle before use. Select [Pair Phone] Set through TUNE knob Search for device names as dis-
played on your mobile phone and connect. Input the passkey displayed on the screen. (Passkey : 0000) The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not com-
pleted within the 3 minutes, the mobile phone pairing process will automatically be canceled. Press the SETUP key Select [Phone]
XMA44012T, XMA44013T, XMA44014T 4 16 Phone List The names of up to 5 paired phones will be displayed. 4-208-01
] is displayed in front of the cur-
A [
rently connected phone. Select the desired name to setup the selected phone.
Connecting a phone Select [Phone List] Select mobile phone through Select [Connect Phone]
TUNE knob 4-208-02 Features of your vehicle
Disconnecting a connected phone Select [Phone List] Select mobile phone through Select [Disconnect Phone]
TUNE knob 4-208-3 Select a mobile phone that is not currently connected. Select the currently connected mobile phone. Connect phone. the selected mobile Connection completion is dis-
played. If a phone is already connected, disconnect the currently connect-
ed phone and select a new phone to connect. Disconnect the selected mobile phone. Disconnection completion is dis-
played. 4 17 Features of your vehicle
Changing connection sequence
(Priority)
- The connected phone will automat-
ically be changed to No. 1 priority. This is used to change the order (pri-
ority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority]
through TUNE knob Select No. 1 Priority mobile phone Select [Priority]. From the paired phones, select the phone desired for No.1 priority. The changed priority sequence is displayed. Once the connection sequence
(priority) is changed, the new no. 1 priority mobile phone will be con-
nected.
- When the no. 1 priority cannot be connected: Automatically attempts to connect the most recently con-
nected phone.
- Cases when the most recently con-
nected phone cannot be connect-
ed: Attempts to connect in the order in which paired phones are listed.
Delete Select [Phone List] Select mobile phone through Select [Delete]
TUNE knob Select the desired mobile phone. Delete the selected mobile phone. Deletion completion is displayed. When attempting to delete a cur-
the rently connected phone, phone is first disconnected. CAUTION
When you delete a mobile phone, the mobile phone phone book will also be erased.
For stable BluetoothWireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. 4 18 Phone book Download This feature is used to download phone book and call histories into the audio system. Select [Phone book Download]
Select through TUNE knob CAUTION
The download feature may not be supported in some mobile phones.
If a different operation is per-
formed while phone book is being downloaded, download-
ing will be discontinued. Phone book already down-
loaded will be saved.
When downloading new phone book, delete all previously saved phone book before start-
ing download. Outgoing Volume This is used to set the volume of your voice as heard by the other party while on a Bluetooth Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set vol-
ume through Even while on a call, the volume can be changed by using the TUNE knob SEEK TRACK key. Auto Download When connecting a mobile phone, it is possible to automatically download new phone book and Call Histories. Select [Auto Download] Set TUNE knob OFF through ON
/
in
(files) saved Audio Streaming Songs your Bluetooth Wireless Technology enabled mobile phone can be played through the audio system. Select [Audio Streaming] Set OFF TUNE knob through ON
/
CAUTION The Bluetooth Wireless Technology audio streaming feature may not be supported in some mobile phones. Features of your vehicle BluetoothWireless Technology System Off This feature is used when you do not wish to use the Bluetooth Wireless Technology system. Select [Bluetooth System Off] Set through If a phone is already connected, disconnect the currently connect-
ed phone and turn the Bluetooth Wireless Technology system off. TUNE knob 4 19 Features of your vehicle Using the BluetoothWireless Technology System use Bluetooth Wireless To Technology when the system is cur-
rently off, follow these next steps.
Turning On Bluetooth Wireless PHONE Technology through the Key Press key Screen PHONE the Guidance Moves to the screen where Bluetooth Wireless Technology functions can be used and displays guidance. 4 20
Turning On Bluetooth Wireless SETUP Technology through the Key SETUP key 3 key Select [Phone]
Press the knob or A screen asking whether to turn on Bluetooth Wireless Technology will be displayed. On the screen, select to turn on BluetoothWireless Technology and display guidance. YES If the Bluetooth Wireless Technology system is turned on, the system will automatically try to connect the most recently connect-
ed Bluetooth Wireless Technology mobile phone. CAUTION
BluetoothWireless Technology connection may become inter-
mittently disconnected in some mobile phones. Follow these next steps to try again. 1)Turn the BluetoothWireless Technology function within the mobile phone ON/OFF and try to connect again. 2)Turn the mobile phone power ON/OFF and try to connect again. 3)Completely remove the mobile phone battery, reboot, and then try to con-
nect again. 4)Reboot the audio system and try to connect again 5)Delete all paired devices in your mobile phone and the audio system and pair again for use. System Settings Memory Information
(if equipped) Press the SETUP key Select [System]
XMA44015T Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is dis-
played on the left side while the total system memory is displayed on the right side. Features of your vehicle Language This menu is used to set the display and voice recognition language. Select [Language] Set through TUNE knob The system will reboot after the language is changed. Language support by region
-
XMA44017T 4 21 Features of your vehicle RADIO (for RDS model) Changing RADIO mode XMA44036T key SEEK TRACK SEEK Press the
Shortly pressing the key (under 0.8 seconds): Changes the frequency.
Pressing and holding the key (over 0.8 seconds): Automatically search-
es for the next frequency. 4 22 Preset SEEK Press the 1
Shortly pressing the key (under 0.8 frequency seconds): Plays saved in the corresponding key. the key
~
6
Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the currently playing broadcast to the selected key and sound a BEEP.
~
1 6 Selecting through manual search Turn the adjust the frequency.
- FM : Changes by 50KHz
- AM : Changes by 9khz TUNE knob left/right to Traffic Announcement (TA) Shortly pressing the TA/SCAN
/
(under 0.8 seconds): Set TA Traffic Announcement) mode. ON key OFF key TA/SCAN SCAN Press the
Pressing and holding the key (over 0.8 seconds): The broadcast fre-
quency increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency. PTY Up/Down key when
Press the searching in RDS Broadcasting Program Type selec-
tion. FOLDER PTY PTY MENU Within
(Auto Store) and Info functions. MENU key are the A.Store AST (Auto Store) Press the through MENU TUNE knob or key Set [ AST]
key. 1 RPT 1
~
XMA44037T Select AST (Auto Store) to save fre-
quencies with superior reception to
. If no frequen-
presets cies are received, then the most recently received frequency will be broadcast. Saves only to the Preset memory of FMA or AMA
~
1 6 6 mode. MENU AF (Alternative Frequency) key Set [ AF]
Press the through key. The Alternative Frequency option can be turned On/Off. TUNE knob or 2 RDM Features of your vehicle key Set
[
TUNE knob or Region Press Region] through the MENU 3 key. The Region option can be turned On/Off. News key Set [ News]
Press the through key. The News option can be turned On/Off. MENU TUNE knob or 4 Info Volume Info Volume refers to the sound vol-
ume upon receiving News or Traffic information. The info volume can be controlled by turning the VOL knob left/right while a news or traffic broadcast is playing. AF, Region, and News are RDS Radio menus. 4 23 1 RPT Repeat While song (file) is playing
(RPT) key Audio CD, MP3 CD, USB, iPod, My Music mode: RPT on screen
To repeat one song (Shortly press-
ing the key (under 0.8 seconds)):
Repeats the current song. MP3 CD, USB mode: FLD.RPT on screen
To repeat folder (pressing twice):
repeats all files within the current folder. Press the off repeat. 1 RPT key again to turn Features of your vehicle BASIC METHOD OF USE :
Audio CD / MP3 CD / USB /
iPod / My Music MEDIA key to change the Press the in order of CD mod mode USB(iPod) AUX My Music BT Audio. The folder/file name is displayed on the screen. XMA44040T, XMA44041T XMA44042T, XMA44043T
<USB>
<My Music>
<Audio CD>
The CD is automatically played when a CD is inserted. The USB music is automatically played when a USB is connected.
<CD MP3>
4 24 Changing Song/File
Shortly pressing the key: Plays the current song from the beginning. SEEK TRACK If the key is pressed again within 1 second, the previous song is played.
Pressing and holding the key (over 0.8 seconds): Rewinds the song. is playing
(file) While song key SEEK TRACK
Shortly pressing the key : Plays the next song.
Pressing and holding the key (over 0.8 seconds): Fast forwards the song. 2 RDM Random While song (file) is playing
(RDM) key Audio CD, My Music mode: RDM on screen
Random (Shortly pressing the key): Plays all songs in random order. MP3 CD, USB mode: FLD.RDM on screen
Folder Random (Shortly pressing the key): Plays all files within the current folder in random order. MP3 CD, USB mode: RDM on screen
Random (pressing twice): Plays all files in random order. iPod mode: RDM on screen
Random (Shortly pressing the key): Plays all files in random order. Press the off random. 2 RDM key again to turn Features of your vehicle Scan (for RDS model)
Pressing and holding the TA/SCAN key (over 0.8 seconds) : Scans all songs for 10 seconds starting from the next song. Pressing and holding the key again to turn off. TA/SCAN 4 25 Features of your vehicle Folder Search : MP3 CD, USB Mode While
(Folder Up) key is playing file FOLDER PTY
Searches the next folder. While is playing
(Folder Down) key file PTY FOLDER
Searches the parent folder. If a folder is selected by pressing the TUNE knob, the first file within the selected folder will be played. In iPod mode, moves to the Parent Folder. Searching Songs (File)
Turning TUNE knob : Searches for songs (files)
Pressing TUNE knob : Plays selected song (file). 4 26 MENU : Audio CD Press the CD MP3 mode to set Information features. key the Repeat, Random, MENU Information features. XMA44044T MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn off. key Set [ RPT]
1 RPT MENU Random key Set [ RDM]
Press the through the 2 RDM key to randomly play songs within the current folder. Press RDM again to turn off. TUNE knob or MENU key Set [
TUNE knob or Information Press the through the key to display information of the cur-
rent song. Press the info display. key to turn off Info]
3 MENU MENU : MP3 CD / USB Press the CD MP3 mode key to set the Repeat, Folder Random, Folder Repeat, All Random, Information, and Copy features. MENU Information, and Copy features. XMA44045T MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn off. key Set [ RPT]
1 RPT the Folder Random Press MENU F.RDM] through the or within the current folder. Press F.RDM again to turn off. TUNE knob key to randomly play songs key Set 2 RDM
[
the MENU All Random Press A.RDM] through the or songs within the CD. Press A.RDM again to turn off. TUNE knob key to randomly play all key Set 4
[
key Set [ F.RPT]
Folder Repeat Press the MENU through the key to repeat songs within the cur-
rent folder. Press F.RPT again to turn off. TUNE knob or 3 MENU key Set [
TUNE knob or Information Press the through the key to display information of the cur-
rent song. Press the info display. key to turn off Info]
5 MENU Features of your vehicle Copy (if equipped) Press the through the key. MENU key Set [ Copy]
TUNE knob or 6 This is used to copy the current song into My Music. You can play the copied Music in My Music mode. If another key is pressed while copying is in progress, a pop up asking you whether to cancel copying is displayed. If another media is connected or inserted (USB, CD, iPod, AUX) while copying is in progress, copy-
ing is canceled. Music will not be played while copying is in progress. 4 27 key Set
[
TUNE knob the MENU Search Press Search] through the or Displays iPod category list. Searching iPod key. 4 is key pressed, move to par-
category MENU ent category. MENU key Set [ RDM]
Random Press the through the key. Plays all songs within the currently playing category in random order. Press RDM again to turn off. TUNE knob or 2 MENU key Set [
TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]
3 MENU Features of your vehicle MENU : iPod In iPod mode, press the to set Information and Search features. key the Repeat, Random, MENU XMA44046T MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn repeat off. key Set [ RPT]
1 RPT 4 28 MENU : My Music Mode
(if equipped) In My Music mode, press the MENU key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. XMA44047T MENU Repeat Press the through the key. Repeats the currently playing song. Press RPT again to turn repeat off. key Set [ RPT]
1 RPT TUNE knob or MENU Random Press the through the key. Plays all songs in random order. Press RDM again to turn random key Set [ RDM]
2 RDM TUNE knob or off. MENU key Set [
TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]
3 MENU Features of your vehicle MENU TUNE knob or key Set [ Delete]
Delete Press the through the key. Deletes currently playing file In the play screen, pressing delete will delete the currently playing song. Deletes file from list 4 XMA44048T Select the file you wish to delete by using the TUNE knob. MENU Press the key and select the delete menu to delete the selected file. 4 29 Features of your vehicle MENU Delete All Press the through the key. Deletes all songs of My Music. TUNE knob or key Set [ Del.All]
5 the key Set Delete Selection Press MENU Del.Sel] through the or Songs within My Music are selected and deleted. Select the songs you wish to delete TUNE knob key. 6
[
from the list. XMA44049T 4 30 After selecting, press the MENU key and select the delete menu. XMA44050T NOTICE - USING THE My Music Even if memory is available, a maximum of 6,000 songs can be stored. The same song can be copied up to 1,000 times. Memory info can be checked in the System menu of Setup. AUX AUX is used to play external MEDIA currently connected with the AUX terminal. AUX mode will automatically start when an external device is connect-
ed with the AUX terminal. If an external device is connected, you can also press the key to change to AUX mode. MEDIA XMA44051T AUX mode cannot be started unless there is an external device connected to the AUX terminal. NOTICE - USING THE AUX Fully insert the AUX cable into the AUX terminal for use. BluetoothWireless Technology AUDIO
(if equipped)
Bluetooth Wireless Technology audio can be used only when the
[Audio Streaming] of Phone is turned On. the Setting Bluetooth Wireless Technology Audio Streaming :
Press key Select
[Phone] through the tune knob Select [Audio Streaming] through the
/
OFF TUNE knob Set SETUP ON MEDIA Starting BluetoothWireless Technology Audio
Press the key to change the mode in order of CD USB AUX My Music BT Audio.
If BT Audio is selected, Bluetooth Wireless Technology audio will start playing. Audio may not automatically start playing in some mobile phones. What is BluetoothWireless Technology?
Bluetooth Wireless Technology is a wireless technology that allows mul-
tiple devices to be connected in a short range, low-powered devices like hands-free, stereo headset, wire-
less remote controller, etc. For more information, visit the Bluetooth Wireless Technology website at www.Bluetooth.com Before using Bluetooth Wireless Technology audio features
Bluetooth Wireless Technology audio may not be supported depending on the compatibility of your Bluetooth Wireless Technology mobile phone.
In order to use Bluetooth Wireless Technology audio, you must first pair and connect the Bluetooth Wireless Technology mobile phone. Features of your vehicle Using the Bluetooth Wireless Technology audio features
Play / Pause Press the pause the current song. TUNE knob to play and XMA44052T The title / artist info may not be supported in some mobile phone. When it is not supported, no title /
no artist will be displayed. The previous song / next song /
play / pause functions may not be supported some mobile phones. in 4 31 Features of your vehicle PHONE (if equipped) Making a call using the Steering remote controller Before using the Bluetooth Wireless Technology phone features
In order to use Bluetooth Wireless Technology phone, you must first pair and connect the Bluetooth Wireless Technology mobile phone.
If the mobile phone is not paired or connected, it is not possible to enter Phone mode. Once a phone is paired or connected, the guid-
ance screen will be displayed.
If Priority is set upon vehicle igni-
tion (IGN/ACC ON), the Bluetooth Wireless Technology phone will be automatically connected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically connected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology phone connec-
tion, set the Bluetooth Wireless Technology power to OFF. 4 32 1. VOLUME button : Raises or lowers speaker volume. 2.MUTE button : Mute the micro-
phone during a call. 3. 4. button : Places and transfers calls. button : Ends calls or cancels functions.
Check call history and making call Shortly press (under 0.8 seconds) key on the steering the remote controller. The call history list will be dis-
played on the screen. Press the key again to con-
nect a call to the selected number.
Redialing the most recently called number Press and hold (over 0.8 seconds) key on the steering the remote controller. The most recently called number is redialed. Phone MENU (for RDS model) Press the key to display three menus (Call History, Phone Book, Phone Setup). PHONE XMA44053T
[
1 RPT key. the key Set TUNE knob Call history Press PHONE History] through the or The call history is displayed and can be used to select a number and make a call. If call history does not exist, a screen asking whether to download call his-
tory is displayed. (The download fea-
ture may not be supported in some mobile phones) Features of your vehicle Setup]
key Set [
TUNE knob or Phone Setup Press the PHONE through the key. The Bluetooth Wireless Technology mobile phone setup screen is dis-
played. For more information, refer to Phone Setup. 3 key. key Set [ P. TUNE knob or Phone Book Press the PHONE Book] through the 2 RDM The phone book is displayed and can be used to select a number and make a call. If more than one number is saved to one contact, then a screen showing the mobile phone num-
ber, Home and office number is displayed. Select the desired num-
ber to make the call. If phone book do not exist, a screen asking whether to down-
load phone book is displayed.
(The download feature may not be supported some mobile phones) in 4 33 Features of your vehicle NOTICE - USING THE Some Bluetooth BluetoothWireless Technology CELLULAR PHONE Do not use a cellular phone or per-
form Wireless Technology settings (e.g. pairing a phone) while driving. Bluetooth Wireless Technology -enabled phones may not be recognized by the system or fully compatible with the system. Before using Bluetooth Wireless Technology related features of the audio system, refer your phones Users Manual for phone-side Bluetooth Wireless Technology operations. The phone must be paired to the audio system to use Bluetooth Wireless Technology related fea-
tures. You will not be able to use the hands-free feature when your phone (in the car) is outside of the cellular service area (e.g. in a tun-
nel, in a underground, in a moun-
tainous area, etc.).
( Continued) 4 34
( Continued) If the cellular phone signal is poor or the vehicles interior noise is too loud, it may be difficult to hear the other persons voice during a call. Do not place the phone near or inside metallic objects, otherwise communications with Bluetooth Wireless Technology system or cel-
lular service stations can be dis-
turbed. is connected through Bluetooth Wireless Technology your phone may dis-
charge quicker than usual for additional Bluetooth Wireless Technology-related operations. While a phone Some cellular phones or other devices may cause interference noise or malfunction to audio sys-
tem. In this case, store the device in a different location may resolve the condition. Phone contact names should be saved in English or they may not be displayed correctly.
( Continued) ON),
( Continued) If Priority is set upon vehicle igni-
the tion(IGN/ACC Bluetooth Wireless Technology phone will be automatically con-
nected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically con-
nected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology connection, turn the Bluetooth Wireless Technology feature off. The hands-free call volume and quality may differ depending on the mobile phone type. Bluetooth Wireless Technology features can be used only when the mobile phone has been paired and connected with the device. For more information on pairing and connecting Bluetooth Wireless Technology enabled mobile phones, refer to the Phone Setup section.
( Continued)
( Continued) When a Bluetooth Wireless Technology mobile phone is con-
) icon will appear at nected, a (
the top of the screen. If a (
) icon is not displayed, this indicates that a Bluetooth Wireless Technology enabled device has not been con-
nected. You must connect the device before use. For more infor-
mation on Bluetooth Wireless Technology mobile phones, refer to the Phone Setup section. a connecting Bluetooth Wireless Technology enabled mobile phone will work only when the Bluetooth Wireless Technology option within your mobile phone has been turned on.
(Methods of the Bluetooth Wireless Technology enabled feature may differ depending on the mobile phone.)
( Continued) turning on and Pairing Features of your vehicle
( Continued) In some mobile phones, starting the ignition while talking through Bluetooth Wireless Technology enabled handsfree call will result in the call becoming disconnected.
(Switch the call back to your mobile phone when starting the ignition.) in Some features may not be sup-
some Bluetooth ported Wireless Technology mobile phone and devices. Bluetooth Wireless Technology enabled operation may be unsta-
ble depending on the communica-
tion state. Placing the audio system within an electromagnetic environment may result in noise interference. 4 35 Features of your vehicle APPENDIX Name AST (A.store) SDVC Description Automatica lly selects and saves channels Speed Dependent Volume Control 4 36 Appendix Homologation FCC Compliance Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interferencethat may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Do Not Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment.
Be sure
The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IC Compliance Statement.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisee aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-04-22 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-04-22
|
||||
1 | Applicant's complete, legal business name |
HYUNDAI MOBIS CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0014195663
|
||||
1 | Physical Address |
203, Teheran-ro
|
||||
1 |
Seoul, N/A 135-977
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TQ8
|
||||
1 | Equipment Product Code |
AM1A0C6AN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** C********
|
||||
1 | Title |
Senior Engineer
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
c******@mobis.co.kr
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/18/2014 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DIGITAL CAR AUDIO SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Other configurations or co-location with other transmitters requires additional evaluation and possible filing for a C2PC or new certification. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DT&C Co.,
|
||||
1 | Name |
C****** L********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
c******@digitalemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0016600 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC