X5010 Mobile Phone User manual

Getting started Thank you for choosing Infinix smartphone. We hope this product will bring you a brand new experience. Inserting SIM card 1. Place the SIM cards face down and align it with the opening of the holder . 2. properly . Insert them into the SIM card slots of the phone 1 Charging the phone The device can be charged using a charger or by connecting it to a computer through a USB cable (included with the phone).

*Image for illustration only 2 Features and parts Earphone Jack Front camera Camera Flash Volume USB Jack Speaker Power Button

*Note:The phone can be restarted by holding the power button for 10 seconds.

*Android is a trademark of Google Inc. 3 Making a call On the start screen, tap number to make a call. and enter a complete phone 4 Call log You can make calls, add new contacts and send messages at the call records interface. Tap here to add a new contact. Tap here to dial out. Tap here. 5 Sending and Receiving message(s) Enter the Messaging interface to create a new message. Touch the space for text input and the virtual keyboard will appear. Tap here to add attachments such as pictures, videos and audios files. Tap here to select contact from phonebook. Tap to capitalize the next letter you type. Press space or a punctuation mark to enter the highlighted suggestion. a. When you are composing a new text message, you can select text for cutting or copying. The selected text is highlighted in green. 1. Tap and hold the text field or portion that contains text. 2. You can select all texts, copy, cut and paste. b. When a new message is received, you can read it by opening the notification panel and clicking the message, or entering Messaging to read it directly. 6 FCC Caution Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This Mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement 7 The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: X5010 (FCC ID: 2AIZN-X5010) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.79W/Kg and when properly worn on the body is1.27W/Kg This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

*Android is a trademark of Google Inc. 8