Getting started Thank you for choosing Infinix smartphone. We hope this product will bring you a brand new experience. The demo is only for reference, please subject to the specific product software Inserting SIM card 1. Switch off the mobile phone and remove the rear cover. 2. Insert the SIM card in the card slot properly. 3. Finally, replace the rear cover of the mobile phone. 1 Inserting memory card 1. Switch off the mobile phone and remove the rear cover. 2. Insert the Micro SD card into the slot. 3. Finally, replace the rear cover of the mobile phone. Note: Use only compatible memory cards with the device. Incompatible memory cards may damage the card or the device and corrupt the data stored in the card. Charging the phone You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). Note: Only use compatible charger; immovable inbuilt battery. The phone can be restarted by holding the power button for 10 seconds. 2 Features The phone supports 4G SIM cards and its camera, video recorder, FM radio, and music and sound recorder offer amazing experiences. 3 Making a call On the Home Screen, tap and dial a complete phone number to make a call. 4 Call log In the call log, you can make a call, add new contact or send a message. Tap here to add the new Contact. Tap here. Tap here to redial. 5 Sending and receiving message(s) Enter Messaging, and then compose new message. You can open the keyboard by tapping on a text field. Tap here to select contact from phonebook. Tap here to add attachments such as pictures, videos and audios files. Tap to capitalize the next letter you type. a. When you are composing a new text message, you can select text for cutting or copying. The selected text is highlighted in green. Tap and hold the text field or portion that contains text. You can select all texts, copy, cut and paste. b. When a new message is received, you can read it by opening the notification panel and clicking the message, or entering Messaging to read it directly. 6 Warning:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a 7 substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.797W/kg and for head is 0.095W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID:2AIZN-X620B Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 8