Date: December 09, 2019 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Limited Modular Approval Request Letter FCC ID: PKRISGMD8800 The following attestation addresses the requirements to support modular approval:
Modular approval requirement
(a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly
(b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal
(c) The module must contain power supply regulation on the module Yes (provide brief statement) Yes, module radio elements are shielded. Refer to External Photographs Exhibit Yes, module chipset design incorporates integrated buffer circuitry No *
Yes, module chipset design incorporates voltage regulation to transceiver circuitry Not Applicable to Licensed Modules
(d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)
(e) The module must demonstrate compliance in a stand-alone configuration
(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes, EUT Conformance Testing of the module was performed in Stand-Alone configuration. Yes, Refer to Product Label Exhibit. 9605 Scranton Road Suite 300, San Diego CA 92121 Toll Free: 888.888.9231 Main 858.812.3400 Fax 858.812.3406 Inseego Corp. www.inseego.com Yes, MD8800 module is compliant with all applicable FCC rules. Compliance requirements are stated in the MD8800 Integration Guide Exhibit. The MD8800 module is not for sale to 3rd parties and the user manual integration instructions are internal confidential manufacturing documents. Grant for this module is Limited based on this these statements. Yes (provide brief statement) Yes, Compliance with RF Exposure requirements is addressed in the RF Exposure Report. No *
(g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Modular approval requirement
(h) The module must comply with RF exposure requirements Yours sincerely, Name: Roman Olmos Title: Regulatory Engineer 9605 Scranton Road Suite 300, San Diego CA 92121 Toll Free: 888.888.9231 Main 858.812.3400 Fax 858.812.3406 Inseego Corp. www.inseego.com