FCC ID: PKRNVWE725 Dual-band CDMA/EVDO Modem Card

by: Inseego Corp. latest update: 2009-12-17 model: NVWE725

Twenty Seven grants have been issued under this FCC ID from 12/07/2006 to 12/17/2009 (this is one of twenty-six releases in 2009 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked warrantee terms, troubleshooting guides, password defaults, drivers, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Host Manual Users Manual pdf 687.93 KiB
various User Manual Users Manual pdf 2.27 MiB March 10 2008 / September 01 2009
various User Manual 1 Users Manual pdf 1.13 MiB April 03 2009 / June 03 2009
various User Manual 10 Users Manual pdf 2.24 MiB
various User Manual 11 Users Manual pdf 777.57 KiB
various User Manual 2 Users Manual pdf 21.15 KiB April 03 2009 / June 03 2009
various User Manual 3 Users Manual pdf 1.24 MiB
various User Manual 4 Users Manual pdf 2.13 MiB
various User Manual 5 Users Manual pdf 1.77 MiB
various User Manual 6 Users Manual pdf 2.84 MiB
various User Manual 7 Users Manual pdf 1000.71 KiB
various User Manual 8 Users Manual pdf 829.34 KiB
various User Manual 9 Users Manual pdf 1.88 MiB
various manual Users Manual pdf 1.51 MiB
various user guide Users Manual pdf 1.37 MiB May 09 2008
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Operational Description pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Test Report pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf September 09 2009
various External Photos pdf September 09 2009
various Cover Letter(s) pdf September 09 2009
various RF Exposure Info pdf September 09 2009
various Operational Description pdf February 09 2009
various Cover Letter(s) pdf March 04 2009
various Internal Photos pdf March 04 2009
various Test Report pdf March 04 2009
various Cover Letter(s) pdf April 03 2009 / June 03 2009
various Cover Letter(s) pdf April 03 2009 / June 03 2009
various ID Label/Location Info pdf April 03 2009 / June 03 2009
various Test Report pdf April 03 2009 / June 03 2009
various Test Report pdf April 03 2009 / June 03 2009
various Test Report pdf April 03 2009 / June 03 2009
various Test Report pdf April 03 2009 / June 03 2009
various Operational Description pdf June 01 2009 / July 01 2009
various Operational Description pdf June 01 2009 / July 01 2009
various RF Exposure Info pdf June 01 2009 / July 01 2009
various Cover Letter(s) pdf June 01 2009 / July 01 2009
various Cover Letter(s) pdf June 01 2009 / July 01 2009
various Test Report pdf June 01 2009 / July 01 2009
various Test Report pdf June 01 2009 / July 01 2009
various Test Report pdf June 01 2009 / July 01 2009
various Test Report pdf June 01 2009 / July 01 2009
various Test Report pdf June 01 2009 / July 01 2009
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Operational Description pdf March 10 2008
various Test Report pdf March 10 2008
various Test Report pdf March 10 2008
various Test Report pdf March 10 2008
various Cover Letter(s) pdf May 09 2008 / November 09 2008
various External Photos pdf May 09 2008
various Cover Letter(s) pdf / November 09 2008
various Cover Letter(s) pdf May 09 2008 / November 09 2008
various RF Exposure Info pdf / November 09 2008
various Operational Description pdf / November 09 2008
various Operational Description pdf / November 09 2008
various Cover Letter(s) pdf October 09 2008 / November 09 2008
various Cover Letter(s) pdf May 09 2008 / November 09 2008
various Internal Photos pdf May 09 2008
various ID Label/Location Info pdf May 09 2008 / November 09 2008
various Cover Letter(s) pdf October 09 2008 / November 09 2008
various RF Exposure Info pdf / November 09 2008
various RF Exposure Info pdf / November 09 2008
various Operational Description pdf
various Operational Description pdf
various Operational Description pdf
various Operational Description pdf
various Operational Description pdf
various Operational Description pdf
various Operational Description pdf
various Operational Description pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Host Manual Users Manual pdf 687.93 KiB
various User Manual Users Manual pdf 2.27 MiB March 10 2008 / September 01 2009
various User Manual 1 Users Manual pdf 1.13 MiB April 03 2009 / June 03 2009
various User Manual 10 Users Manual pdf 2.24 MiB
various User Manual 11 Users Manual pdf 777.57 KiB
various User Manual 2 Users Manual pdf 21.15 KiB April 03 2009 / June 03 2009
various User Manual 3 Users Manual pdf 1.24 MiB
various User Manual 4 Users Manual pdf 2.13 MiB
various User Manual 5 Users Manual pdf 1.77 MiB
various User Manual 6 Users Manual pdf 2.84 MiB
various User Manual 7 Users Manual pdf 1000.71 KiB
various User Manual 8 Users Manual pdf 829.34 KiB
various User Manual 9 Users Manual pdf 1.88 MiB
various manual Users Manual pdf 1.51 MiB
various user guide Users Manual pdf 1.37 MiB May 09 2008

frequency equipment class purpose
1 2009-12-17 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter Class II Permissive Change
2 2009-09-30 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
3 2009-09-09 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
4 2009-09-02 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
5 2009-04-03 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
6 2009-03-06 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
7 2009-01-07 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
8 2008-10-03 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
9 2008-09-11 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
10 2008-07-31 824.7 ~ 848.31 PCB - PCS Licensed Transmitter
11 2008-06-16 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
12 2008-02-20 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
13 2008-01-23 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
14 2007-12-04 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
15 2007-10-01 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
16 2007-09-07 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
17 2007-09-05 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
18 2007-08-28 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
19 2007-06-14 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
20 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
21 2007-06-13 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
22 2007-06-04 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
23 2007-05-15 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
24 2007-05-14 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
25 2007-04-16 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
26 2007-03-07 1851.25 ~ 1908.75 PCB - PCS Licensed Transmitter
27 2006-12-07 824.7 ~ 848.31 PCB - PCS Licensed Transmitter Original Equipment

Application Forms

app s Applicant Information
various Effective 2009-12-17
various 2009-09-30
various 2009-09-09
various 2009-09-02
various 2009-04-03
various 2009-03-06
various 2009-01-07
various 2008-10-03
various 2008-09-11
various 2008-07-31
various 2008-06-16
various 2008-02-20
various 2008-01-23
various 2007-12-04
various 2007-10-01
various 2007-09-07
various 2007-09-05
various 2007-08-28
various 2007-06-14
various 2007-06-13
various 2007-06-04
various 2007-05-15
various 2007-05-14
various 2007-04-16
various 2007-03-07
various 2006-12-07
various Applicant's complete, legal business name Inseego Corp.
various FCC Registration Number (FRN) 0003757176
various Physical Address 9605 Scranton Road Suite 300
various 9605 Scranton Road
various San Diego
various San Diego, CA
various United States
app s TCB Information
various TCB Application Email Address c******@curtis-straus.com
various m******@ccsemc.com
various H******@atcb.com
various r******@pctestlab.com
various h******@atcb.com
various h******@AmericanTCB.com
various TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
app s FCC ID
various Grantee Code PKR
various Equipment Product Code NVWE725
app s Person at the applicant's address to receive grant or for contact
various Name R**** O****
various Title Regulatory Engineering
various Telephone Number 858-8******** Extension:
various Fax Number 858-8********
various E-mail r******@inseego.com
app s Technical Contact
various Firm Name NTS Calgary
various PCTEST Engineering Laboratory, Inc.
various Flom Test Lab
various Flom Test Labs
various Elliott Laboratories, Inc.
various Novatel Wireless Inc.
various Flom Test lab
various Name G****** M********
various R**** O********
various H****** B********
various H**** S****** B********
various M****** H******
various Physical Address 5151 47th St. NE
various 6660-B Dobbin Road
various 3356 S. San Marcos Pl.
various 3356 N. San Marcos Place
various 3356 N. San Marcos Pl, Ste. 107
various 684 West Maude Ave
various 3356 N. San Marcos Pl.
various Calgary, T3J 3R2
various Columbia, Maryland 21045
various Chandler, 85225
various Chandler, Arizona 85225
various Sunnyvale, California 94085
various Canada
various United States
various Telephone Number 403-5******** Extension:
various 403-5********
various 410-2********
various 480-9********
various 48092********
various (480)********
various 408-2********
various Fax Number 403-5********
various 410-2********
various 480-9********
various 48092********
various (480)********
various 408-2********
various E-mail g******@ntscorp.com
various r******@pctestlab.com
various H******@mflom.com
various h******@mflom.com
various d******@elliottlabs.com
app s Non Technical Contact
various Firm Name Elliott Laboratories, Inc.
various Name M******** H****
various Physical Address 684 West Maude Ave.
various Sunnyvale, California 94085
various United States
various Telephone Number 408-2********
various Fax Number 408-2********
various E-mail d******@elliottlabs.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)02/20/2009
various01/09/2009
various10/25/2008
various09/13/2008
various07/31/2008
various03/08/2008
various10/12/2007
various07/15/2007
various07/10/2007
various08/09/2007
various06/29/2007
various06/28/2007
various01/21/2007
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassPCB - PCS Licensed Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Dual-band CDMA/EVDO Modem Card
variousDual-Band CDMA/ EVDO Modem Card
variousCellular/ PCS CDMA Modem Card
variousPCS Licensed Transmitter
variousDual-Band CDMA / EVDO Modem Card
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?No
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousYes
variousGrant CommentsClass II permissive change filing for evaluating RF exposure collocation with FCC ID: RUJ-Q802XKN as described in this filing. These modules are to be collocated in Ambient Corporations fixed/mobile smart grid nodes. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations.
variousClass II permissive change filing by adding this device in a portable host, co-locating with other radios and implementing two-way bios features as documented in this filing. Output power listed is conducted; maximum antenna gain is 3dBi. Approval is limited to OEM installation only; OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with instructions concerning transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device; except end-users removal/installation is permitted per conditions described in fillings under this FCC ID. This module is approved for use in mobile and fixed device applications, with the antenna(s) used for this transmitter installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. Use in portable and co-located exposure conditions has been evaluated as described in filings under this FCC ID; the highest reported single-and- co-transmit body SAR values are: Part 22: 1.15 W/kg; Part 24: 1.544 W/kg.
variousOutput power listed is conducted; maximum antenna gain is 3dBi. Approval is limited to OEM installation only; OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with instructions concerning transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device; except end-users removal/installation is permitted per conditions described in fillings under this FCC ID. This module is approved for use in mobile and fixed device applications, with the antenna(s) used for this transmitter installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. Use in portable and co-located exposure conditions has been evaluated as described in filings under this FCC ID; the highest reported single-and- co-transmit body SAR values are: Part 22: 1.15 W/kg; Part 24: 1.544 W/kg.
variousOutput power listed is conducted; maximum antenna gain is 3dBi. Approval is limited to OEM installation only; OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with instructions concerning transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device; except end-users removal/installation is permitted per conditions described in fillings under this FCC ID. This module is approved for use in mobile and fixed device applications, with the antenna(s) used for this transmitter installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. Use in portable and co-located exposure conditions has been evaluated as described in filings under this FCC ID; the highest reported single-and- co-transmit body SAR values are: Part 22: 1.15 W/kg; Part 24: 1.544 W/kg.
variousClass II Permissive Change. Output power listed is conducted; maximum antenna gain is 3dBi. Approval is limited to OEM installation only; OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with instructions concerning transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device; except end-users removal/installation is permitted per conditions described in fillings under this FCC ID. This module is approved for use in mobile and fixed device applications, with the antenna(s) used for this transmitter installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. Use in portable and co-located exposure conditions has been evaluated as described in filings under this FCC ID; the highest reported single-and- co-transmit body SAR values are: Part 22: 1.15 W/kg; Part 24: 1.544 W/kg.
variousOutput power listed is conducted; maximum antenna gain is 3dBi. Approval is limited to OEM installation only; OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with instructions concerning transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device; except end-user removal/installation is permitted per conditions described in filings under this FCC ID. This module approved for use in mobile and fixed device applications, with the antenna(s) used for this transmitter installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented in this filing. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. Use in portable and collocated exposure conditions has been evaluated as described in filings under this FCC ID; the highest reported single- and co-transmit body SAR values are: part 22: 1.15 W/kg; part 24: 1.544 W/kg.
variousOutput power listed is conducted; maximum antenna gain is 3dBi. Approval is limited to OEM installation only; OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with instructions concerning transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device; except end-user removal/installation is permitted per conditions described in filings under this FCC ID. This module approved for use in mobile and fixed device applications, with the antenna(s) used for this transmitter installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. Use in portable and collocated exposure conditions has been evaluated as described in filings under this FCC ID; the highest reported single- and co-transmit body SAR values are: part 22: 1.15 W/kg; part 24: 1.544 W/kg.
variousSingle Modular
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude D630C and Precision M2300. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The highest reported SAR value is: Part 22H Body 1.153 W/kg, Part 24E Body0.719 W/kg. This device is allowed collocation of the antenna(s) used for this device when installed (under OET 65 General population/Uncontrolled Exposure) as described in this filing in the following Dell Computer model numbers: Latitude D630C ; Precision M2300 ; XFR630 Notebook Computer. This device is allowed collocation of the antenna(s) used for this device when installed (under OET 65 General population/Uncontrolled Exposure) as described in this filing in the following Dell Computer model numbers: Studio 1535 ; Studio 1536 ; Studio 1735 when used with the specific modules as described in this permissive change. End User removal/installation by means of the Permit but ask ruling on Novatels PID/VID method is allowed. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the OQO Model 02 Ultra Mobile Personal Computer under OET 65C General Population/Uncontrolled Exposure.
variousClass II Permissive Change. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This Permissive Change supports the integration of this device when installed in the ADTRAN NIM router card as described in this filing.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude D630C and Precision M2300. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The highest reported SAR value is: Part 22H Body 1.153 W/kg, Part 24E Body0.719 W/kg. This device is to allowed collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Latitude D630C and Precision M2300 under OET 65 General population/Uncontrolled Exposure. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the OQO Model 02 Ultra Mobile Personal Computer under OET 65C General Population/Uncontrolled Exposure. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell XFR630 Notebook Computer under OET 65C General population/Uncontrolled Exposure and also allow End User removal/installation by means of the Permit but ask ruling on Novatels PID/VID method.
variousPower output listed is ERP for Part 22 and EIRP for Part 24. This device also contains functions that are not operational in U.S. Territories; this filing is only applicable for US operations. SAR compliance has been established in the host product(s) with slot configurations as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. This transmitter is restricted for use with the specific antenna(s) tested for this filing. When the associated cable and clip are employed, the EUT operates as a mobile device with respect to RF Exposure. The antenna(s) used for this transmitter must not be co-located or operate in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The highest reported SAR values are: Part 22 - Body: 1.27 W/kg; Part 24 - Body: 1.48 W/kg.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude D630C and Precision M2300. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The highest reported SAR value is: Part 22H Body 1.153 W/kg, Part 24E Body0.719 W/kg. This device is to allowed collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Latitude D630C and Precision M2300 under OET 65 General Population/Uncontrolled Exposure. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the OQO Model 02 Ultra Mobile Personal Computer under OET 65C General Population/Uncontrolled Exposure.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude D630C and Precision M2300. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The highest reported SAR value is: Part 22H Body 1.153 W/kg, Part 24E Body0.719 W/kg. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Latitude D630C and Precision M2300 under OET 65 General Population/Uncontrolled Exposure.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Inspiron 1525, Inspiron 1526 and XPS M1530. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The highest reported SAR value is: Part 22H Body 1.153 W/kg, Part 24E Body0.719 W/kg. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Inspiron 1525, Inspiron 1526 and XPS M1530 under OET 65 General Population/Uncontrolled Exposure.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Latitude XT. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude XT. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The highest reported SAR value is: Part 22H Body 1.153 W/kg, Part 24E Body 0.719 W/kg.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Inspiron 1420, and Vostro 1400. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Inspiron 1420, and Vostro 1400.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell XPS M1330. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell XPS M1330.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Inspiron 1721, Dell Inspiron 1720, Dell Vostro 1700 and Dell XPS M1730. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Inspiron 1721, Dell Inspiron 1720, Dell Vostro 1700 and Dell XPS M1730.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Inspiron 1520, Inspiron 1521, and Vostro 1500. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Inspiron 1520, Inspiron 1521, and Vostro 1500.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Latitude D430, Latitude D420 and XPS M1210. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude D430, Latitude D420 and XPS M1210.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Dell Latitude ATG D620 and Dell Latitude ATG D630. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Dell Latitude ATG D620 and Dell Latitude ATG D630.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Latitude D631, Latitude D630 and Latitude D620. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Latitude D631, Latitude D630 and Latitude D620.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi. This PC is to allow collocation of the antenna(s) used for this device when installed as described in this filing in the Dell Computer model numbers: Latitude D830, Precision M65, Latitude D820 and Precision M4300. The end-user is allowed to self-install/remove the unit under this grant when operated in conjunction with the Dell Computer Model numbers: Latitude D830, Precision M65, Latitude D820 and Precision M4300.
variousPower listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operational conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093, and different antenna configurations. The maximum antenna gain is 3dBi.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC.
various Compliance Certification Services
various National Technical Systems, Inc.
various PCTEST Engineering Laboratory, Inc.
various Compliance Testing, LLC
various Elliott Laboratories LLC
various Name S****** L********
various T****** C******
various N****** K****
various R******** O********
various M******** S****
various S****** S****
various D******** B********
various Telephone Number 978 6******** Extension:
various 510-7********
various 403-5******** Extension:
various 410-2********
various 480-9********
various 48092********
various 408-2********
various Fax Number 97848********
various 510-6********
various 403-5********
various 410 2********
various 480 9********
various 48092********
various 410-2********
various 408-2********
various E-mail s******@us.bureauveritas.com
various t******@ccsemc.com
various n******@ntscorp.com
various r******@pctestlab.com
various m******@compliancetesting.com
various s******@ComplianceTesting.com
various r******@pctestlab.com
various d******@elliottlabs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
1 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
2 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
3 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
4 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 22H 824.7 848.1 0.291 2.5 ppm 1M26F9W
5 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
6 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 22H 824.7 848.5 0.291 2.5 ppm 1M26F9W
7 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 22H 824.7 848.5 0.291 2.5 ppm 1M26F9W
8 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 22H 824.7 848.5 0.291 2.5 ppm 1M26F9W
9 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
10 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
11 2 22H 824 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
12 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
13 2 22H 824 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
14 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
15 2 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
16 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
17 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
18 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
19 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
20 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
21 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
22 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
23 2 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
24 2 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
25 2 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W
26 2 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 22H 824.7 848.31 0.291 2.5 ppm 1M26F9W
27 2 24E 1851.25 1908.75 0.296 2.5 ppm 1M26F9W

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC