app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2019-11-18
|
1 2 3 4 5 6 7 8 9
|
2019-09-17
|
1 2 3 4 5 6 7 8 9
|
2019-06-28
|
1 2 3 4 5 6 7 8 9
|
2019-06-17
|
1 2 3 4 5 6 7 8 9
|
2019-05-20
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Inseego Corp.
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0003757176
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
9605 Scranton Road Suite 300
|
1 2 3 4 5 6 7 8 9
|
9605 Scranton Road
|
1 2 3 4 5 6 7 8 9
|
San Diego, CA
|
1 2 3 4 5 6 7 8 9
|
San Diego, California 92121
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
a******@tuvsud.com
|
1 2 3 4 5 6 7 8 9
|
v******@tuvsud.com
|
1 2 3 4 5 6 7 8 9
|
V******@tuvsud.com
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
1 2 3 4 5 6 7 8 9
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
1 2 3 4 5 6 7 8 9
|
B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
|
1 2 3 4 5 6 7 8 9
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8 9
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
PKR
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
ISGM1000
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8 9
|
Name |
R**** O******
|
1 2 3 4 5 6 7 8 9
|
Title |
Regulatory Engineering
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
858-8******** Extension:
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
858-8********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
r******@inseego.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 7 8 9 | Yes |
1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/01/2019 |
1 2 3 4 5 6 7 8 9 | 12/25/2019 |
1 2 3 4 5 6 7 8 9 | 12/14/2019 |
1 2 3 4 5 6 7 8 9 | 11/08/2019 |
1 2 3 4 5 6 7 8 9 | 11/09/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 9 | Equipment Class | CBE - Citizens Band End User Devices |
1 2 3 4 5 6 7 8 9 | PCB - PCS Licensed Transmitter |
1 2 3 4 5 6 7 8 9 | 5GM - Part 30 Mobile Transmitter |
1 2 3 4 5 6 7 8 9 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 9 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 9 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Hot Spot Modem |
1 2 3 4 5 6 7 8 9 | Wireless Hotspot Modem |
1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 7 8 9 | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 8 9 | Original Equipment |
1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 9 | Grant Comments | C2PC as described in this filing. Output power is EIRP. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for stand-alone and simultaneous transmission are: 0.67 W/kg and 1.18 W/Kg respectively. |
1 2 3 4 5 6 7 8 9 | C2PC as described in this filing. Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for body-worn accessory and simultaneous transmission are: 1.18 W/kg and 1.42 W/Kg respectively. |
1 2 3 4 5 6 7 8 9 | C2PC as described in this filing. Output power listed is EIRP. This device supports bandwidths of 50, 100 MHz and 400 MHz with up to 4CC for NR band n260 and n261. The highest averaged power density tested at 10mm for 5G NR is 0.255 mW/cm². Compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Output power is EIRP. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for stand-alone and simultaneous transmission are: 0.67 W/kg and 1.03 W/Kg respectively. |
1 2 3 4 5 6 7 8 9 | Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for body-worn accessory and simultaneous transmission are: 1.18 W/kg and 1.42 W/Kg respectively. |
1 2 3 4 5 6 7 8 9 | Power output listed is conducted. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for body-worn accessory and simultaneous transmission are: 0.24 W/kg and 1.42 W/Kg respectively. |
1 2 3 4 5 6 7 8 9 | Power output listed is conducted. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for body-worn accessory and simultaneous transmission are: 0.12 W/kg and 1.24 W/Kg respectively. |
1 2 3 4 5 6 7 8 9 | Output power listed is EIRP. This device supports bandwidths of 50, 100 MHz and 400 MHz with up to 4CC for NR band n261. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
1 2 3 4 5 6 7 8 9
|
TUV SUD America Inc.
|
1 2 3 4 5 6 7 8 9
|
Sporton International (USA) Inc
|
1 2 3 4 5 6 7 8 9
|
Name |
E****** L******
|
1 2 3 4 5 6 7 8 9
|
M**** E********
|
1 2 3 4 5 6 7 8 9
|
K****** L******
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+886-********
|
1 2 3 4 5 6 7 8 9
|
813-2********
|
1 2 3 4 5 6 7 8 9
|
16692********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
+886-********
|
1 2 3 4 5 6 7 8 9
|
978 9********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
e******@tw.bureauveritas.com
|
1 2 3 4 5 6 7 8 9
|
W******@tuvsud.com
|
1 2 3 4 5 6 7 8 9
|
k******@sporton-lab.com
|
|