FCC ID: PD93165D2 Intel Dual Band Wireless-AC 3165

by: Intel Corporation latest update: 2018-06-20 model: 3165D2

Thirteen grants have been issued under this FCC ID from 07/01/2015 to 06/20/2018 (this is one of three hundred and seventeen releases in 2018 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked warrantee terms, password defaults, instructions, drivers, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 4.60 MiB September 02 2017 / August 08 2017
various User Manual 1 Users Manual pdf 4.89 MiB
various User Manual 2 Users Manual pdf 545.22 KiB
various Internal Photos Internal Photos pdf 418.12 KiB February 08 2016
various External Photos External Photos pdf 302.08 KiB February 08 2016
various Label and Location ID Label/Location Info pdf 180.48 KiB February 08 2016 / March 08 2016
various Labels and Locations ID Label/Location Info pdf 908.97 KiB
various Authorization Letter Cover Letter(s) pdf 259.56 KiB
various Confidentiality Letter Cover Letter(s) pdf 309.22 KiB
various Permissive Change Letter Cover Letter(s) pdf 354.79 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various Software Security Letter Cover Letter(s) pdf 266.65 KiB
various Test Setup Photos pdf
various Passive Scan Attestation Attestation Statements pdf 92.27 KiB
various RF Exposure Info pdf September 02 2017
various Test Setup Photos pdf September 02 2017 / August 08 2017
various Passive Scan Security Attestation Attestation Statements pdf 75.33 KiB February 08 2016 / March 08 2016
various Change of ID Letter Cover Letter(s) pdf 17.41 KiB January 07 2015
various User Manual Users Manual pdf 4.60 MiB September 02 2017 / August 08 2017
various User Manual 1 Users Manual pdf 4.89 MiB
various User Manual 2 Users Manual pdf 545.22 KiB
various Internal Photos Internal Photos pdf 418.12 KiB February 08 2016
various External Photos External Photos pdf 302.08 KiB February 08 2016
various Label and Location ID Label/Location Info pdf 180.48 KiB February 08 2016 / March 08 2016
various Labels and Locations ID Label/Location Info pdf 908.97 KiB
various Authorization Letter Cover Letter(s) pdf 259.56 KiB
various Confidentiality Letter Cover Letter(s) pdf 309.22 KiB
various Permissive Change Letter Cover Letter(s) pdf 354.79 KiB
various Software Security Letter Cover Letter(s) pdf 266.65 KiB
various Passive Scan Attestation Attestation Statements pdf 92.27 KiB
various Passive Scan Security Attestation Attestation Statements pdf 75.33 KiB February 08 2016 / March 08 2016
various Change of ID Letter Cover Letter(s) pdf 17.41 KiB January 07 2015

frequency equipment class purpose
1 2018-06-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 2422 ~ 2452 DTS - Digital Transmission System
3 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
4 2017-02-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2422 ~ 2452 DTS - Digital Transmission System
7 2016-08-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 2422 ~ 2452 DTS - Digital Transmission System
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2015-07-01 JBP - Part 15 Class B Computing Device Peripheral Change in Identification
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 2422 ~ 2452 DTS - Digital Transmission System
13 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2018-06-20
various 2017-02-09
various 2016-08-03
various 2015-07-01
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0008035131
various Physical Address 100 Center Point Circle Suite 200
various 100 Center Point Circle
various Columbia
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various H******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code 3165D2
app s Person at the applicant's address to receive grant or for contact
various Name S******** C******** H********
various Title Product Regulations Engineer
various Telephone Number 803-3********
various Fax Number 803-2********
various E-mail s******@intel.com
app s Technical Contact
various Firm Name RF Exposure Lab
various QuieTek Corp.
various Intel Mobile Communications
various Name J****** M********
various M****** C****
various S****** H******
various Physical Address 802 N. Twin Oaks Valley Road, Suite 105
various 802 N. Twin Oaks Valley Rd. Suite 105
various No. 5-22, Rueishu Keng, Linkou Dist.
various 100 Center Point Circle Suite 200
various San Marcos, California 92069
various San Marcos, Arizona 92069
various New Taipei City, 24451
various Columbia, South Carolina 29210
various Columbia, 29210
various United States
various Taiwan
various Telephone Number +1760********
various 76047********
various 88628******** Extension:
various 88628********
various 80321********
various Fax Number 76047********
various 88628********
various 80321********
various E-mail i******@rfexposurelab.com
various m******@quietek.com
various S******@Intel.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)12/17/2018
various08/08/2017
various01/29/2017
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless-AC 3165
variousIntel Dual-Band Wireless-AC 3165
variousWireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.58 W/kg respectively. This change is to request approval for portable category specific host tablet PC, Lenovo model number - Lenovo ideapad D330-10IGM, with antenna Speedwire part no F-OG-XZ-0119-001-K0 Tx1 and F-OGXZ- 0120-001-G0 Tx2 and South Star part no N12-4268-R0A Tx1 and N12-4269-R0A Tx2. Antennas are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.58 W/kg respectively. This change is to request approval for portable category specific host tablet PC, Lenovo model number - Lenovo ideapad D330-10IGM, with antenna Speedwire part no F-OG-XZ-0119-001-K0 Tx1 and F-OGXZ- 0120-001-G0 Tx2 and South Star part no N12-4268-R0A Tx1 and N12-4269-R0A Tx2. Antennas are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.32 W/kg and 1.58 W/kg respectively. This change is to request approval for portable category specific host tablet PC, Lenovo model number - Lenovo ideapad D330-10IGM, with antenna Speedwire part no F-OG-XZ-0119-001-K0 Tx1 and F-OGXZ- 0120-001-G0 Tx2 and South Star part no N12-4268-R0A Tx1 and N12-4269-R0A Tx2. Antennas are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body SAR value is 0.58 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements. This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo MIIX 320-10ICR, with antennas Inpaq part no WA-F-LB-02-105 (Tx1) & WAF-LB-02-106 (Tx2) and South Star part no N12-3460-R0A (Tx1) & N12-3461-R0A (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 1.35 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements. This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo MIIX 320-10ICR, with antennas Inpaq part no WA-F-LB-02-105 (Tx1) & WAF-LB-02-106 (Tx2) and South Star part no N12-3460-R0A (Tx1) & N12-3461-R0A (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 1.19 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements. This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo MIIX 320-10ICR, with antennas Inpaq part no WA-F-LB-02-105 (Tx1) & WAF-LB-02-106 (Tx2) and South Star part no N12-3460-R0A (Tx1) & N12-3461-R0A (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are 0.17 W/kg and 1.35W/kg respectively. This change is to request approval for portable category specific host tablet PC, model number: HP TPN-Q180, with antenna WNC part no. 81EAA415.G19. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are 1.18 W/kg and 1.35W/kg respectively. This change is to request approval for portable category specific host tablet PC, model number: HP TPN-Q180, with antenna WNC part no. 81EAA415.G19. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are 1.02 W/kg and 1.35W/kg respectively. This change is to request approval for portable category specific host tablet PC, model number: HP TPN-Q180, with antenna WNC part no. 81EAA415.G19. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body and simultaneous SAR values are: 0.01 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 0.66 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values are: 1.36 W/kg and 1.37W/kg respectively. Change in identification as specified under 47CFR2.933 of the FCC rules.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name National Technical Systems
various Name D****** B****
various Telephone Number 510-5********
various Fax Number 510 5********
various E-mail d******@nts.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.003
2 2 15C CC MO 2412 2462 0.192
2 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.046
3 2 15E 38 CC MO 5190 5230 0.081
3 3 15E 38 CC MO ND 5260 5320 0.093
3 4 15E 38 CC MO ND 5270 5310 0.098
3 5 15E 38 CC MO ND 5500 5700 0.096
3 6 15E 38 CC MO ND 5530 5690 0.105
3 7 15E 38 CC MO 5745 5825 0.1
3 8 15E 38 CC MO 5755 5795 0.101
3 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.046
5 2 15E 38 CC MO 5190 5230 0.081
5 3 15E 38 CC MO ND 5260 5320 0.093
5 4 15E 38 CC MO ND 5270 5310 0.098
5 5 15E 38 CC MO ND 5500 5700 0.096
5 6 15E 38 CC MO ND 5530 5690 0.105
5 7 15E 49 CC MO 5745 5825 0.1
5 8 15E 49 CC MO 5755 5795 0.101
5 9 15E 49 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.003
6 2 15C CC MO 2412 2462 0.192
6 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.003
8 2 15C CC MO 2412 2462 0.192
8 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.046
9 2 15E 38 CC MO 5190 5230 0.081
9 3 15E 38 CC MO ND 5260 5320 0.093
9 4 15E 38 CC MO ND 5270 5310 0.098
9 5 15E 38 CC MO ND 5500 5720 0.096
9 6 15E 38 CC MO ND 5530 5690 0.105
9 7 15E 38 CC MO 5745 5825 0.1
9 8 15E 38 CC MO 5755 5795 0.101
9 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.003
12 2 15C CC MO 2412 2462 0.192
12 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.046
13 2 15E CC MO 5190 5230 0.081
13 3 15E 38 CC MO ND 5260 5320 0.093
13 4 15E 38 CC MO ND 5270 5310 0.098
13 5 15E 38 CC MO ND 5500 5720 0.096
13 6 15E 38 CC MO ND 5530 5690 0.105
13 7 15E 38 CC MO ND 5745 5825 0.1
13 8 15E 38 CC MO ND 5755 5795 0.101

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC