FCC ID: PD97265D2 Intel Dual Band Wireless-AC 7265

by: Intel Corporation latest update: 2018-10-08 model: 7265D2

Forty grants have been issued under this FCC ID from 07/25/2014 to 10/08/2018 (this is one of three hundred and seventeen releases in 2018 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, troubleshooting guides, password defaults, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 4.70 MiB August 10 2018 / June 04 2019
various User Manual 1 Users Manual pdf 811.37 KiB April 05 2015
various User Manual 2 Users Manual pdf 1.96 MiB April 05 2015
various User Manual Saftey Guide Users Manual pdf 1.86 MiB January 09 2015
various Users Manual Users Manual pdf 936.06 KiB
various Cover Letter(s) pdf August 10 2018
various ID Label/Location Info pdf August 10 2018
various Cover Letter(s) pdf August 10 2018
various RF Exposure Info pdf August 10 2018
various RF Exposure Info pdf August 10 2018
various RF Exposure Info pdf August 10 2018
various RF Exposure Info pdf August 10 2018
various RF Exposure Info pdf August 10 2018
various Cover Letter(s) pdf August 10 2018
various Attestation Statements pdf August 10 2018
various Cover Letter(s) pdf August 10 2018
various ID Label/Location Info pdf August 10 2018
various RF Exposure Info pdf November 01 2018
various Test Setup Photos pdf November 01 2018 / October 07 2018
various RF Exposure Info pdf November 01 2018
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Setup Photos pdf
various Attestation Statements pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various External Photos pdf January 08 2016
various Internal Photos pdf January 08 2016
various Attestation Statements pdf January 09 2015
various Cover Letter(s) pdf February 09 2015 / January 09 2015
various Attestation Statements pdf
various Cover Letter(s) pdf April 05 2015
various Cover Letter(s) pdf April 05 2015
various Cover Letter(s) pdf April 05 2015
various Cover Letter(s) pdf
various Attestation Statements pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various User Manual Users Manual pdf 4.70 MiB August 10 2018 / June 04 2019
various User Manual 1 Users Manual pdf 811.37 KiB April 05 2015
various User Manual 2 Users Manual pdf 1.96 MiB April 05 2015
various User Manual Saftey Guide Users Manual pdf 1.86 MiB January 09 2015
various Users Manual Users Manual pdf 936.06 KiB

frequency equipment class purpose
1 2018-10-08 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2018-04-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2422 ~ 2462 DTS - Digital Transmission System
7 2018-01-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
9 2422 ~ 2462 DTS - Digital Transmission System
10 2017-04-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
12 2422 ~ 2452 DTS - Digital Transmission System
13 2017-02-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
15 2422 ~ 2452 DTS - Digital Transmission System
16 2017-02-15 2422 ~ 2452 DTS - Digital Transmission System
17 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 2016-08-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
21 2422 ~ 2452 DTS - Digital Transmission System
22 2015-11-04 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
23 2422 ~ 2452 DTS - Digital Transmission System
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2015-09-01 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2422 ~ 2452 DTS - Digital Transmission System
28 2015-08-25 2422 ~ 2452 DTS - Digital Transmission System
29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
30 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
31 2015-05-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
33 2422 ~ 2452 DTS - Digital Transmission System
34 2015-02-11 2422 ~ 2452 DTS - Digital Transmission System
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
37 2014-07-25 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX Original Equipment
38 2422 ~ 2452 DTS - Digital Transmission System
39 JBP - Part 15 Class B Computing Device Peripheral
40 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2018-10-08
various 2018-04-30
various 2018-01-11
various 2017-04-17
various 2017-02-22
various 2017-02-15
various 2016-08-02
various 2015-11-04
various 2015-09-01
various 2015-08-25
various 2015-05-04
various 2015-02-11
various 2014-07-25
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0008035131
various Physical Address 100 Center Point Circle Suite 200
various 100 Center Point Circle
various Columbia, SC
various United States
app s TCB Information
various TCB Application Email Address h******@ACBcert.com
various H******@acbcert.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code 7265D2
app s Person at the applicant's address to receive grant or for contact
various Name S****** C****** H******
various Title Product Regulations Engineer
various Telephone Number 803-3********
various Fax Number 803-2********
various E-mail s******@intel.com
app s Technical Contact
various Firm Name Intel Mobile Communications
various QuieTek Corp.
various UL Japan Inc.
various SGS Taiwan Ltd.
various RF Exposure Lab
various Name S****** H****
various M****** C********
various T******** H****
various W******** C********
various J****** M********
various S**** H****
various Physical Address 100 Center Point Circle Suite 200
various 100 Center Point Circle
various No. 5-22, Rueishu Keng, Linkou Dist.
various 4383-326 Asama-cho, Ise-shi
various 134 Wu Kung Rd.
various 802 N. Twin Oaks Valley Rd. Suite 105
various 100 Center Point Circle Suit 200
various Columbia, Virginia 29210
various Columbia, South Carolina 29210
various Columbia, Pennsylvania 29210
various Columbia, 29210
various New Taipei City, 24451
various Mie-ken, 516-0021
various New Taipei City, 24803
various San Marcos, California 92069
various San Marcos, 92069
various United States
various Taiwan
various Japan
various Telephone Number +1803********
various +1803********
various 80321********
various 88628******** Extension:
various 81596********
various 88622******** Extension:
various 76047********
various Fax Number 80321********
various 80321********
various 88628********
various 81596********
various 88622********
various 76047********
various E-mail s******@Intel.com
various S******@Intel.com
various m******@quietek.com
various T******@ul.com
various w******@sgs.com
various i******@rfexposurelab.com
various s******@intel.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)04/06/2019
various10/27/2018
various07/10/2018
various10/14/2017
various08/21/2017
various08/14/2017
various01/28/2017
various05/02/2016
various02/28/2016
various02/21/2016
various10/30/2015
various08/10/2015
various01/20/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless-AC 7265
variousIntel Dual-Band Wireless-AC 7265
variousWireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the host platform Samsung model XE525QBB with antennas WNC PIFA antennas Main 81.EL915.G33 and Aux 81.EL915.G32. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in Mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the host platform Samsung model XE525QBB with antennas WNC PIFA antennas Main 81.EL915.G33 and Aux 81.EL915.G32. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.36W/kg respectively. This change establishes portable category SAR conditions for the host platform Samsung model XE525QBB with antennas WNC PIFA antennas Main 81.EL915.G33 and Aux 81.EL915.G32. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.49W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Samsung model XE521QAB with WNC PIFA antennas Main 81.EL915.G33 and Aux 81.EL915.G32. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.24W/kg and 1.49W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Samsung model XE521QAB with WNC PIFA antennas Main 81.EL915.G33 and Aux 81.EL915.G32. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.30W/kg and 1.49W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Samsung model XE521QAB with WNC PIFA antennas Main 81.EL915.G33 and Aux 81.EL915.G32. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Samsung model XE510C25 with Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Samsung model XE510C25 with Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.08W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Samsung model XE510C25 with Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.51W/kg respectively. This change establishes portable category Samsung model XE510C24I with Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.51W/kg respectively. This change establishes portable category Samsung model XE510C24I with Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.51W/kg respectively. This change establishes portable category Samsung model XE510C24I with Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the host platform Samsung model Xe510C24I and antennas Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the host platform Samsung model Xe510C24I and antennas Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.54W/kg respectively. This change establishes portable category SAR conditions for the host platform Samsung model Xe510C24I and antennas Galtronics PIFA antennas (Main & Aux). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.33W/kg respectively. This change is to request approval for portable category specific host tablet PC, Dell model P26T, Antennas Acon, Part No. Main/Aux ANP6Y-200047 and Yageo, Part No. Main/Aux ANTA0DC11432WLAN1. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.40W/kg and 1.33W/kg respectively. This change is to request approval for portable category specific host tablet PC, Dell model P26T, Antennas Acon, Part No. Main/Aux ANP6Y-200047 and Yageo, Part No. Main/Aux ANTA0DC11432WLAN1. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.33W/kg respectively. This change is to request approval for portable category specific host tablet PC, Dell model P26T, Antennas Acon, Part No. Main/Aux ANP6Y-200047 and Yageo, Part No. Main/Aux ANTA0DC11432WLAN1. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host tablet PC, model number: HP TPN-Q180, with antenna WNC part no. 81EAA415.G19 and Inpaq part no. WA-P-LBLB-02-016. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousOutput power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host tablet PC, model number: HP TPN-Q180, with antenna WNC part no. 81EAA415.G19 and Inpaq part no. WA-P-LBLB-02-016. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.38W/kg respectively. This change is to request approval for portable category specific host tablet PC, model number: HP TPN-Q180, with antenna WNC part no. 81EAA415.G19 and Inpaq part no. WA-P-LBLB-02-016. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.19W/kg respectively. This change is to request approval for RF exposure evaluation to add 2-in-1 PC Chassis, Toshiba model number: PDW0J, with the antennas: - Antenna option 1: Acon Part No. TSB-PGS-F001 (Tx1) and TSB-PGS-F002 (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This change is to request approval for RF exposure evaluation to add 2-in-1 PC Chassis, Toshiba model number: PDW0J, with the antennas: - Antenna option 1: Acon Part No. TSB-PGS-F001 (Tx1) and TSB-PGS-F002 (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.19W/kg respectively. This change is to request approval for RF exposure evaluation to add 2-in-1 PC Chassis, Toshiba model number: PDW0J, with the antennas: - Antenna option 1: Acon Part No. TSB-PGS-F001 (Tx1) and TSB-PGS-F002 (Tx2). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 1.18 W/kg. This change is to request approval for rf exposure portable category specific host tablet PC, model number: HP HSTNH-I508FC, with antenna Amphenol part no BSHP7141-16-000-C (Tx1) and BSHP7139-12-000-C (Tx2). Add new antenna type (PIFA + parasitic) Amphenol part no BSHP7141-16-000-C (Tx1) and BSHP7139-12-000-C (Tx2).
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body SAR value is 0.05 W/kg. This change is to request approval for rf exposure portable category specific host tablet PC, model number: HP HSTNH-I508FC, with antenna Amphenol part no BSHP7141-16-000-C (Tx1) and BSHP7139-12-000-C (Tx2). Add new antenna type (PIFA + parasitic) Amphenol part no BSHP7141-16-000-C (Tx1) and BSHP7139-12-000-C (Tx2).
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 1.21 W/kg. This change is to request approval for RF exposure portable category specific host tablet PC, model number: HP HSTNH-I508FC, with antenna Amphenol part no BSHP7141-16-000-C (Tx1) and BSHP7139-12-000-C (Tx2). Add new antenna type (PIFA + parasitic) Amphenol part no BSHP7141-16-000-C (Tx1) and BSHP7139-12-000-C (Tx2).
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 1.37 W/kg and 1.38W/kg respectively. Additional Chassis added, model number: TPN-Q165, with the following antenna option: Option 1: Speedwire, P/N DQ660060000 (Tx1) and DQ660060001 (Tx2).
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured Body and Simultaneous SAR values are 0.01 W/kg and 1.38W/kg respectively. Additional Chassis added, model number: TPN-Q165, with the following antenna option: Option 1: Speedwire, P/N DQ660060000 (Tx1) and DQ660060001 (Tx2).
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 1.38 W/kg and 1.38W/kg respectively. Additional Chassis added, model number: TPN-Q165, with the following antenna option: Option 1: Speedwire, P/N DQ660060000 (Tx1) and DQ660060001 (Tx2).
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.37W/kg. Additional Chassis added, model number: HSTNN-Q93C, with the following antenna option: Option 1: WNC, P/N DQ6R15GAV00 (Tx1) and DQ6R15GAW00 (Tx2).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 1.36W/kg, Simultaneous TX: 1.37W/kg. Additional Chassis added, model number: HSTNN-Q93C, with the following antenna option: Option 1: WNC, P/N DQ6R15GAV00 (Tx1) and DQ6R15GAW00 (Tx2).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.66 W/kg, Simultaneous TX: 1.37W/kg. Additional Chassis added, model number: HSTNN-Q93C, with the following antenna option: Option 1: WNC, P/N DQ6R15GAV00 (Tx1) and DQ6R15GAW00 (Tx2).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.73 W/kg. Simultaneous TX: 1.43W/kg. This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.43W/kg. This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX: 1.43W/kg. This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.55W/kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA Testing and Certification, S.A.U.
various National Technical Systems
various DEKRA Testing and Certification Co., Ltd.
various SGS Taiwan Ltd.
various Name F**** C********
various D**** B********
various S****** H****
various R**** W********
various J****** L******
various Telephone Number 34-95********
various 510-5********
various 886-2******** Extension:
various +886-******** Extension:
various 886-2******** Extension:
various Fax Number 34-95********
various 510 5********
various 886-2********
various +886-********
various 886 2********
various E-mail f******@dekra.com
various d******@nts.com
various s******@quietek.com
various R******@sgs.com
various j******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.003
1 2 15C CC MO 2412 2472 0.192
1 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.046
2 2 15E 38 CC MO 5190 5230 0.081
2 3 15E 38 CC MO ND 5260 5320 0.093
2 4 15E 38 CC MO ND 5270 5310 0.098
2 5 15E 38 CC MO ND 5500 5720 0.096
2 6 15E 38 CC MO ND 5530 5690 0.105
2 7 15E 38 CC MO 5745 5825 0.1
2 8 15E 38 CC MO 5755 5795 0.101
2 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.046
5 2 15E 38 CC MO 5190 5230 0.081
5 3 15E 38 CC MO ND 5260 5320 0.093
5 4 15E 38 CC MO ND 5270 5310 0.098
5 5 15E 38 CC MO ND 5500 5720 0.096
5 6 15E 38 CC MO ND 5530 5690 0.105
5 7 15E 38 CC MO 5745 5825 0.1
5 8 15E 38 CC MO 5755 5795 0.101
5 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.003
6 2 15C CC MO 2412 2472 0.192
6 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E 38 CC MO 5180 5240 0.046
8 2 15E 38 CC MO 5190 5230 0.081
8 3 15E 38 CC MO ND 5260 5320 0.093
8 4 15E 38 CC MO ND 5270 5310 0.098
8 5 15E 38 CC MO ND 5500 5720 0.096
8 6 15E 38 CC MO ND 5530 5690 0.105
8 7 15E 38 CC MO 5745 5825 0.1
8 8 15E 38 CC MO 5755 5795 0.101
8 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.003
9 2 15C CC MO 2412 2472 0.192
9 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 38 CC MO 5180 5240 0.046
11 2 15E 38 CC MO 5190 5230 0.081
11 3 15E 38 CC MO ND 5260 5320 0.093
11 4 15E 38 CC MO ND 5270 5310 0.098
11 5 15E 38 CC MO ND 5500 5720 0.096
11 6 15E 38 CC MO ND 5530 5690 0.105
11 7 15E 38 CC MO 5745 5825 0.1
11 8 15E 38 CC MO 5755 5795 0.101
11 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.003
12 2 15C CC MO 2412 2462 0.192
12 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.046
14 2 15E 38 CC MO 5190 5230 0.081
14 3 15E 38 CC MO ND 5260 5320 0.093
14 4 15E 38 CC MO ND 5270 5310 0.098
14 5 15E 38 CC MO ND 5500 5720 0.096
14 6 15E 38 CC MO ND 5530 5690 0.105
14 7 15E 49 CC MO 5745 5825 0.1
14 8 15E 49 CC MO 5755 5795 0.101
14 9 15E 49 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.003
15 2 15C CC MO 2412 2462 0.192
15 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.003
16 2 15C CC MO 2412 2462 0.192
16 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E 38 CC MO 5180 5240 0.046
17 2 15E 38 CC MO 5190 5230 0.081
17 3 15E 38 CC MO ND 5260 5320 0.093
17 4 15E 38 CC MO ND 5270 5310 0.098
17 5 15E 38 CC MO ND 5500 5720 0.096
17 6 15E 38 CC MO ND 5530 5690 0.105
17 7 15E 49 CC MO 5745 5825 0.1
17 8 15E 49 CC MO 5755 5795 0.101
17 9 15E 49 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E 38 CC MO 5180 5240 0.046
20 2 15E 38 CC MO 5190 5230 0.081
20 3 15E 38 CC MO ND 5260 5320 0.093
20 4 15E 38 CC MO ND 5270 5310 0.098
20 5 15E 38 CC MO ND 5500 5720 0.096
20 6 15E 38 CC MO ND 5530 5690 0.105
20 7 15E 38 CC MO 5745 5825 0.1
20 8 15E 38 CC MO 5755 5795 0.101
20 9 15E 38 CC MO 5775 5775 0.043
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.003
21 2 15C CC MO 2412 2462 0.192
21 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC MO 5180 5240 0.046
22 2 15E CC MO 5190 5230 0.081
22 3 15E 38 CC MO ND 5260 5320 0.093
22 4 15E 38 CC MO ND 5270 5310 0.098
22 5 15E 38 CC MO ND 5500 5700 0.096
22 6 15E 38 CC MO ND 5530 5690 0.105
22 7 15E 38 CC MO ND 5745 5825 0.1
22 8 15E 38 CC MO ND 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.003
23 2 15C CC MO 2412 2462 0.192
23 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E CC MO 5180 5240 0.046
25 2 15E CC MO 5190 5230 0.081
25 3 15E 38 CC MO ND 5260 5320 0.093
25 4 15E 38 CC MO ND 5270 5310 0.098
25 5 15E 38 CC MO ND 5500 5720 0.096
25 6 15E 38 CC MO ND 5530 5690 0.105
25 7 15E 38 CC MO ND 5745 5825 0.1
25 8 15E 38 CC MO ND 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.003
27 2 15C CC MO 2412 2462 0.192
27 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402 2480 0.003
28 2 15C CC MO 2412 2462 0.192
28 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E CC MO 5180 5240 0.046
30 2 15E CC MO 5190 5230 0.081
30 3 15E 38 CC MO ND 5260 5320 0.093
30 4 15E 38 CC MO ND 5270 5310 0.098
30 5 15E 38 CC MO ND 5500 5700 0.096
30 6 15E 38 CC MO ND 5530 5690 0.105
30 7 15E 38 CC MO ND 5745 5825 0.1
30 8 15E 38 CC MO ND 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E CC MO 5180 5240 0.046
32 2 15E CC MO 5190 5230 0.081
32 3 15E 38 CC MO ND 5260 5320 0.093
32 4 15E 38 CC MO ND 5270 5310 0.098
32 5 15E 38 CC MO ND 5500 5720 0.096
32 6 15E 38 CC MO ND 5530 5690 0.105
32 7 15E 38 CC MO ND 5745 5825 0.1
32 8 15E 38 CC MO ND 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402 2480 0.003
33 2 15C CC MO 2412 2462 0.192
33 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.0032
34 2 15C CC MO 2412 2462 0.192
34 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0032000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC MO 5180 5240 0.046
36 2 15E CC MO 5190 5230 0.081
36 3 15E 38 CC MO ND 5260 5320 0.093
36 4 15E 38 CC MO ND 5270 5310 0.098
36 5 15E 38 CC MO ND 5500 5720 0.096
36 6 15E 38 CC MO ND 5530 5690 0.105
36 7 15E 38 CC MO ND 5745 5825 0.1
36 8 15E 38 CC MO ND 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15E CC MO 5180 5240 0.046
37 2 15E CC MO 5190 5230 0.081
37 3 15E 38 CC MO ND 5260 5320 0.093
37 4 15E 38 CC MO ND 5270 5310 0.098
37 5 15E 38 CC MO ND 5500 5720 0.096
37 6 15E 38 CC MO ND 5530 5690 0.105
37 7 15E 38 CC MO ND 5745 5825 0.1
37 8 15E 38 CC MO ND 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.0032
38 2 15C CC MO 2412 2462 0.192
38 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402.00000000 2480.00000000 0.0032000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC