FCC ID: PD98260NGU Intel Dual Band Wireless-AC 8260

by: Intel Corporation latest update: 2017-07-18 model: 8260NGU

Thirty Five grants have been issued under this FCC ID from 05/27/2015 to 07/18/2017 (this is one of two hundred and sixty-one releases in 2017 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked instructions, password defaults, troubleshooting guides, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 4.69 MiB
various Users Manual Users Manual pdf 425.41 KiB
various Labels and Locations ID Label/Location Info pdf 1.41 MiB
various Authorization Letter Cover Letter(s) pdf 218.06 KiB
various Confidentiality Letter Cover Letter(s) pdf 246.79 KiB
various Permissive Change Letter Cover Letter(s) pdf 828.83 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various Attestation Statements pdf
various Cover Letter(s) pdf March 01 2017
various External Photos pdf March 01 2017 / February 07 2017
various Attestation Statements pdf March 01 2017
various Internal Photos pdf March 01 2017 / February 07 2017
various Test Report pdf March 01 2017
various Test Report pdf March 01 2017
various Test Report pdf March 01 2017
various Cover Letter(s) pdf March 01 2017
various Test Report pdf March 01 2017
various Attestation Statements pdf July 03 2016 / August 03 2016
various Test Setup Photos pdf July 03 2016 / April 09 2016
various Attestation Statements pdf May 01 2016
various Attestation Statements pdf December 11 2015
various Cover Letter(s) pdf December 11 2015
various RF Exposure Info pdf December 11 2015
various ID Label/Location Info pdf December 10 2015
various Attestation Statements pdf June 10 2015
various Attestation Statements pdf
various Cover Letter(s) pdf
various Test Report pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Attestation Statements pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various User Manual Users Manual pdf 4.69 MiB
various Users Manual Users Manual pdf 425.41 KiB
various Labels and Locations ID Label/Location Info pdf 1.41 MiB
various Authorization Letter Cover Letter(s) pdf 218.06 KiB
various Confidentiality Letter Cover Letter(s) pdf 246.79 KiB
various Permissive Change Letter Cover Letter(s) pdf 828.83 KiB

frequency equipment class purpose
1 2017-07-18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2422 ~ 2452 DTS - Digital Transmission System
4 2017-01-03 2422 ~ 2452 DTS - Digital Transmission System
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2016-03-08 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 2422 ~ 2452 DTS - Digital Transmission System
10 2016-01-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 2422 ~ 2462 DTS - Digital Transmission System
12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
13 2015-11-12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2015-11-02 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 5775 ~ 5775 DTS - Digital Transmission System
17 2015-10-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
19 5775 ~ 5775 DTS - Digital Transmission System
20 2015-10-06 5775 ~ 5775 DTS - Digital Transmission System
21 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 2015-08-18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
24 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
25 5775 ~ 5775 DTS - Digital Transmission System
26 2015-08-14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 5775 ~ 5775 DTS - Digital Transmission System
28 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
29 2015-07-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
30 5775 ~ 5775 DTS - Digital Transmission System
31 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
32 2015-05-27 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
33 5775 ~ 5775 DTS - Digital Transmission System
34 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2017-07-18
various 2017-01-03
various 2016-03-08
various 2016-01-19
various 2015-11-12
various 2015-11-02
various 2015-10-16
various 2015-10-06
various 2015-08-18
various 2015-08-14
various 2015-07-20
various 2015-05-27
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0008035131
various Physical Address 100 Center Point Circle Suite 200
various 100 Center Point Circle
various Columbia
various Columbia, SC
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various H******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code 8260NGU
app s Person at the applicant's address to receive grant or for contact
various Name S****** C**** H****
various Title Product Regulations Engineer
various Telephone Number 803-3********
various Fax Number 803-2********
various E-mail s******@intel.com
app s Technical Contact
various Firm Name RF Exposure Lab
various QuieTek Corp.
various Intel Mobile Communications
various Name J**** M********
various V******** W********
various M**** C******
various S**** H********
various Physical Address 802 North Twin Oaks Valley Rd.
various No. 159, Sec. 2, Wenhua 1st Rd. Linkou Dist.
various 802 N. Twin Oaks Valley Rd. Suite 105
various No. 5-22, Rueishu Keng, Linkou Dist.
various 100 Center Point Circle Suite 200
various San Marcos, California 92069
various New Taipei City, 24457
various San Marcos, 92069
various New Taipei City, 24451
various Columbia, South Carolina 29210
various Columbia, 29210
various United States
various Taiwan
various Telephone Number 76047********
various 88622********
various 88628******** Extension:
various 80321********
various 88628********
various Fax Number 76047********
various 88622********
various 88628********
various 80321********
various E-mail i******@rfexposurelab.com
various v******@quietek.com
various m******@quietek.com
various S******@Intel.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/14/2018
various07/02/2017
various09/04/2016
various07/17/2016
various05/10/2016
various04/30/2016
various04/13/2016
various04/03/2016
various02/14/2016
various02/08/2016
various01/16/2016
various11/23/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless-AC 8260
variousWLAN Module Adapter Card
variousWireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.52W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo N24, with antennas South Star part no D04-0282-R0A (Tx1) & D04-0281-R0A (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.52W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo N24, with antennas South Star part no D04-0282-R0A (Tx1) & D04-0281-R0A (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.45W/kg and 1.52W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo N24, with antennas South Star part no D04-0282-R0A (Tx1) & D04-0281-R0A (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.84W/kg and 1.44W/kg respectively. The change filed under this application is for the addition of new dipole type antenna, WIESON, (External). This antenna will be restricted to mobile category computers and stationary desktop computers.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.44W/kg respectively. The change filed under this application is for the addition of new dipole type antenna, WIESON, (External). This antenna will be restricted to mobile category computers and stationary desktop computers.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.44W/kg respectively. The change filed under this application is for the addition of new dipole type antenna, WIESON, (External). This antenna will be restricted to mobile category computers and stationary desktop computers.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P67G, with antennas Ethertronics part no 5002131 (Tx1) & 5002137 (Tx2) and WNC part no 81EAAZ15.G47 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P67G, with antennas Ethertronics part no 5002131 (Tx1) & 5002137 (Tx2) and WNC part no 81EAAZ15.G47 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.84W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P67G, with antennas Ethertronics part no 5002131 (Tx1) & 5002137 (Tx2) and WNC part no 81EAAZ15.G47 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.32W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : T04E, with antennas Amphenol part no RB5635-15-003-C (Tx1) and RB5635-15-002-C (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.18W/kg and 1.32W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : T04E, with antennas Amphenol part no RB5635-15-003-C (Tx1) and RB5635-15-002-C (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.32W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : T04E, with antennas Amphenol part no RB5635-15-003-C (Tx1) and RB5635-15-002-C (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively. The change filed under this application is for frequency band 5725MHz - 5825MHz was previously authorized for this device under section 15.247 of the rules. This permissive change demonstrates compliance with new UNII rules for this same frequency band under section 15.407.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.33W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : T02H, with antennas Auden part no. A30308-00 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : T02H, with antennas Auden part no. A30308-00 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.30W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : T02H, with antennas Auden part no. A30308-00 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.34W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P56F, with antennas Acon part no APL6Y-700002 (Tx1 & Tx2) and TE part no 1556723-1 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.39W/kg and 1.34W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P56F, with antennas Acon part no APL6Y-700002 (Tx1 & Tx2) and TE part no 1556723-1 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.32W/kg and 1.34W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P56F, with antennas Acon part no APL6Y-700002 (Tx1 & Tx2) and TE part no 1556723-1 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.40W/kg and 1.36W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P54G, with antennas Acon part no APL6Y-700000 (Tx1 & Tx2) and TE part no 1556694-2 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 1.35W/kg and 1.36W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P54G, with antennas Acon part no APL6Y-700000 (Tx1 & Tx2) and TE part no 1556694-2 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.36W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P54G, with antennas Acon part no APL6Y-700000 (Tx1 & Tx2) and TE part no 1556694-2 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.39W/kg and 1.41W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively. To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.41W/kg respectively. This change establishes portable category modular SAR conditions at 14mm minimum separation distance of antennas to users based on maximum SAR value of 1.41W/kg (1g).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.45W/kg and 1.41W/kg respectively. This change establishes portable category modular SAR conditions at 14mm minimum separation distance of antennas to users based on maximum SAR value of 0.45W/kg (1g). The next change is to update the filing for compliance data for 802.11 bgn, channel 13 (2472MHz) and 11F (2462MHz). These channels are supported by passive scanning only. Previous test software versión was not capable of supporting output values < 0dBm. Updated test software now enables transmission at low power to demonstrate compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.72W/kg and 1.41W/kg respectively. This change establishes portable category modular SAR conditions at 14mm minimum separation distance of antennas to users based on maximum SAR value of 0.725W/kg (1g).
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. This device must utilize the BIOS locking features as documented in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. This device must utilize the BIOS locking features as documented in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
variousPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various DEKRA Testing and Certification Co., Ltd.
various Name V******** L****
various S******** H******
various Telephone Number 88628******** Extension:
various 886-2******** Extension:
various Fax Number 88628********
various 886-2********
various E-mail v******@dekra.com
various s******@quietek.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.1462
2 2 15E 38 CC MO 5190 5230 0.1343
2 3 15E 38 CC MO 5210 5210 0.113
2 4 15E 38 CC MO ND 5260 5320 0.1387
2 5 15E 38 CC MO ND 5270 5310 0.1413
2 6 15E 38 CC MO ND 5290 5290 0.0483
2 7 15E 38 CC MO ND 5500 5700 0.1393
2 8 15E 38 CC MO ND 5510 5670 0.1419
2 9 15E 38 CC MO ND 5710 5710 0.151
2 1 15E 38 CC MO ND 5720 5720 0.1531
2 11 15E 38 CC MO ND 5530 5690 0.1542
2 12 15E 38 CC MO 5745 5825 0.3776
2 13 15E 38 CC MO 5755 5795 0.3373
2 14 15E 38 CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.01
3 2 15C CC MO 2412 2472 0.3532
3 3 15C CC MO 2422 2452 0.1503
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.01
4 2 15C CC MO 2412 2472 0.3532
4 3 15C CC MO 2422 2452 0.1503
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.1462
5 2 15E 38 CC MO 5190 5230 0.1343
5 3 15E 38 CC MO 5210 5210 0.113
5 4 15E 38 CC MO ND 5260 5320 0.1387
5 5 15E 38 CC MO ND 5270 5310 0.1413
5 6 15E 38 CC MO ND 5290 5290 0.0483
5 7 15E 38 CC MO ND 5500 5700 0.1393
5 8 15E 38 CC MO ND 5510 5670 0.1419
5 9 15E 38 CC MO ND 5710 5710 0.151
5 1 15E 38 CC MO ND 5720 5720 0.1531
5 11 15E 38 CC MO ND 5530 5690 0.1542
5 12 15E 49 CC MO 5745 5825 0.3776
5 13 15E 49 CC MO 5755 5795 0.3373
5 14 15E 49 CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E 38 CC MO 5180 5240 0.1462
7 2 15E 38 CC MO 5190 5230 0.1343
7 3 15E 38 CC MO 5210 5210 0.113
7 4 15E 38 CC MO ND 5260 5320 0.1387
7 5 15E 38 CC MO ND 5270 5310 0.1413
7 6 15E 38 CC MO ND 5290 5290 0.0483
7 7 15E 38 CC MO ND 5500 5700 0.1393
7 8 15E 38 CC MO ND 5510 5670 0.1419
7 9 15E 38 CC MO ND 5530 5690 0.1542
7 1 15E 38 CC MO ND 5710 5710 0.151
7 11 15E 38 CC MO ND 5720 5720 0.1531
7 12 15E 38 CC MO ND 5745 5825 0.3776
7 13 15E 38 CC MO ND 5755 5795 0.3373
7 14 15E 38 CC MO ND 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.01
9 2 15C CC MO 2412 2472 0.3532
9 3 15C CC MO 2422 2452 0.1503
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.01
11 2 15C CC MO 2412 2472 0.3532
11 3 15C CC MO 2422 2462 0.1503
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E 38 CC MO 5180 5240 0.1462
12 2 15E 38 CC MO 5190 5230 0.1343
12 3 15E 38 CC MO 5210 5210 0.113
12 4 15E 38 CC MO ND 5260 5320 0.1387
12 5 15E 38 CC MO ND 5270 5310 0.1413
12 6 15E 38 CC MO ND 5290 5290 0.0483
12 7 15E 38 CC MO ND 5500 5700 0.1393
12 8 15E 38 CC MO ND 5510 5670 0.1419
12 9 15E 38 CC MO ND 5530 5690 0.1542
12 1 15E 38 CC MO ND 5710 5710 0.151
12 11 15E 38 CC MO ND 5720 5720 0.1531
12 12 15E 38 CC MO ND 5745 5825 0.3776
12 13 15E 38 CC MO ND 5755 5795 0.3373
12 14 15E 38 CC MO ND 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC MO 5180 5240 0.1462
13 2 15E 38 CC MO 5190 5230 0.1343
13 3 15E 38 CC MO 5210 5210 0.113
13 4 15E 38 CC MO ND 5260 5320 0.1387
13 5 15E 38 CC MO ND 5270 5310 0.1413
13 6 15E 38 CC MO ND 5290 5290 0.0483
13 7 15E 38 CC MO ND 5500 5700 0.1393
13 8 15E 38 CC MO ND 5510 5670 0.1419
13 9 15E 38 CC MO ND 5530 5690 0.1542
13 1 15E 38 CC MO ND 5710 5710 0.151
13 11 15E 38 CC MO ND 5720 5720 0.1531
13 12 15E 38 CC MO ND 5745 5825 0.3776
13 13 15E 38 CC MO ND 5755 5795 0.3373
13 14 15E 38 CC MO ND 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.1462
14 2 15E CC MO 5190 5230 0.1343
14 3 15E CC MO 5210 5210 0.113
14 4 15E CC MO ND 5260 5320 0.1387
14 5 15E CC MO ND 5270 5310 0.1413
14 6 15E CC MO ND 5290 5290 0.0483
14 7 15E CC MO ND 5500 5700 0.1393
14 8 15E CC MO ND 5510 5670 0.1419
14 9 15E CC MO ND 5530 5690 0.1542
14 1 15E CC MO ND 5710 5710 0.151
14 11 15E CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.01
16 2 15C CC MO 2412 2472 0.3532
16 3 15C CC MO 2422 2462 0.1503
16 4 15C CC MO 5745 5825 0.3776
16 5 15C CC MO 5755 5795 0.3373
16 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC MO 5180 5240 0.1462
18 2 15E CC MO 5190 5230 0.1343
18 3 15E CC MO 5210 5210 0.113
18 4 15E CC MO ND 5260 5320 0.1387
18 5 15E CC MO ND 5270 5310 0.1413
18 6 15E CC MO ND 5290 5290 0.0483
18 7 15E CC MO ND 5500 5700 0.1393
18 8 15E CC MO ND 5510 5670 0.1419
18 9 15E CC MO ND 5530 5690 0.1542
18 1 15E CC MO ND 5710 5710 0.151
18 11 15E CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.01
19 2 15C CC MO 2412 2472 0.3532
19 3 15C CC MO 2422 2462 0.1503
19 4 15C CC MO 5745 5825 0.3776
19 5 15C CC MO 5755 5795 0.3373
19 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.01
20 2 15C CC MO 2412 2472 0.3532
20 3 15C CC MO 2422 2462 0.1503
20 4 15C CC MO 5745 5825 0.3776
20 5 15C CC MO 5755 5795 0.3373
20 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC MO 5180 5240 0.1462
21 2 15E CC MO 5190 5230 0.1343
21 3 15E CC MO 5210 5210 0.113
21 4 15E CC MO ND 5260 5320 0.1387
21 5 15E CC MO ND 5270 5310 0.1413
21 6 15E CC MO ND 5290 5290 0.0483
21 7 15E CC MO ND 5500 5700 0.1393
21 8 15E CC MO ND 5510 5670 0.1419
21 9 15E CC MO ND 5530 5690 0.1542
21 1 15E CC MO ND 5710 5710 0.151
21 11 15E CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15E CC MO 5180 5240 0.1462
24 2 15E CC MO 5190 5230 0.1343
24 3 15E CC MO 5210 5210 0.113
24 4 15E CC MO ND 5260 5320 0.1387
24 5 15E CC MO ND 5270 5310 0.1413
24 6 15E CC MO ND 5290 5290 0.0483
24 7 15E CC MO ND 5500 5700 0.1393
24 8 15E CC MO ND 5510 5670 0.1419
24 9 15E CC MO ND 5530 5690 0.1542
24 1 15E CC MO ND 5710 5710 0.151
24 11 15E CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.01
25 2 15C CC MO 2412 2472 0.3532
25 3 15C CC MO 2422 2462 0.1503
25 4 15C CC MO 5745 5825 0.3776
25 5 15C CC MO 5755 5795 0.3373
25 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.01
27 2 15C CC MO 2412 2472 0.353
27 3 15C CC MO 2422 2462 0.15
27 4 15C CC MO 5745 5825 0.377
27 5 15C CC MO 5755 5795 0.337
27 6 15C CC MO 5775 5775 0.131
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC MO 5180 5240 0.146
28 2 15E CC MO 5190 5230 0.134
28 3 15E CC MO 5210 5210 0.113
28 4 15E CC MO ND 5260 5320 0.1387
28 5 15E CC MO ND 5270 5310 0.141
28 6 15E CC MO ND 5290 5290 0.048
28 7 15E CC MO ND 5500 5700 0.139
28 8 15E CC MO ND 5510 5670 0.1419
28 9 15E CC MO ND 5530 5690 0.154
28 1 15E CC MO ND 5710 5710 0.151
28 11 15E CC MO ND 5720 5720 0.153
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402 2480 0.01
30 2 15C CC MO 2412 2472 0.353
30 3 15C CC MO 2422 2462 0.15
30 4 15C CC MO 5745 5825 0.3776
30 5 15C CC MO 5755 5795 0.337
30 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E CC MO 5180 5240 0.146
31 2 15E CC MO 5190 5230 0.134
31 3 15E CC MO 5210 5210 0.113
31 4 15E CC MO ND 5260 5320 0.1387
31 5 15E CC MO ND 5270 5310 0.1413
31 6 15E CC MO ND 5290 5290 0.048
31 7 15E CC MO ND 5500 5700 0.139
31 8 15E CC MO ND 5510 5670 0.1419
31 9 15E CC MO ND 5530 5690 0.154
31 1 15E CC MO ND 5710 5710 0.151
31 11 15E CC MO ND 5720 5720 0.153
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402 2480 0.01
33 2 15C CC MO 2412 2462 0.3532
33 3 15C CC MO 2422 2452 0.1503
33 4 15C CC MO 5745 5825 0.3776
33 5 15C CC MO 5755 5795 0.3373
33 6 15C CC MO 5775 5775 0.1318
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC MO 5180 5240 0.1462
34 2 15E CC MO 5190 5230 0.1343
34 3 15E CC MO 5210 5210 0.113
34 4 15E CC MO ND 5260 5320 0.1387
34 5 15E CC MO ND 5270 5310 0.1413
34 6 15E CC MO ND 5290 5290 0.0483
34 7 15E CC MO ND 5500 5700 0.1393
34 8 15E CC MO ND 5510 5670 0.1419
34 9 15E CC MO ND 5530 5690 0.1542
34 1 15E CC MO ND 5710 5710 0.151
34 11 15E CC MO ND 5720 5720 0.1531
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0140000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC