submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
User Manaul | Users Manual | 712.23 KiB | ||||
|
User Manual | Users Manual | 706.95 KiB | ||||
|
User Manual Regulatory Guide | Users Manual | 552.30 KiB | ||||
|
User Manual User Guide | Users Manual | 2.72 MiB | ||||
|
Users Manual | Users Manual | 306.13 KiB | ||||
Cover Letter(s) | |||||||
ID Label/Location Info | |||||||
Attestation Statements | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
Cover Letter(s) | |||||||
Test Setup Photos | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
Cover Letter(s) | September 08 2017 | ||||||
Cover Letter(s) | September 08 2017 | ||||||
RF Exposure Info | September 08 2017 | ||||||
Test Setup Photos | |||||||
Attestation Statements | |||||||
RF Exposure Info | September 01 2017 | ||||||
RF Exposure Info | September 01 2017 | ||||||
Test Setup Photos | September 01 2017 / September 07 2017 | ||||||
Test Setup Photos | September 01 2017 / September 07 2017 | ||||||
Attestation Statements | |||||||
External Photos | / December 06 2017 | ||||||
Internal Photos | / December 06 2017 | ||||||
RF Exposure Info | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
Test Report | |||||||
RF Exposure Info | / March 10 2016 | ||||||
ID Label/Location Info | December 07 2016 | ||||||
Cover Letter(s) | March 06 2016 | ||||||
Cover Letter(s) | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Setup Photos | March 06 2016 | ||||||
Test Setup Photos | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Report | March 06 2016 | ||||||
Test Setup Photos | March 06 2016 | ||||||
Test Setup Photos | March 06 2016 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-08-28 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
4 | 2017-08-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
5 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
6 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
7 | 2017-05-30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
8 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
9 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
10 | 2017-02-28 | 5755 ~ 5795 | NII - Unlicensed National Information Infrastructure TX | |
11 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
12 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
13 | 2017-02-23 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
14 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
15 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
16 | 2017-01-09 | 2422 ~ 2462 | DTS - Digital Transmission System | |
17 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
18 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
19 | 2016-12-14 | 2422 ~ 2462 | DTS - Digital Transmission System | |
20 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
21 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
22 | 2016-10-04 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
23 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
24 | 2016-10-03 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
25 | 2016-09-02 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
26 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
27 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
28 | 2016-08-19 | 2422 ~ 2462 | DTS - Digital Transmission System | |
29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
31 | 2016-07-27 | 2422 ~ 2462 | DTS - Digital Transmission System | |
32 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
33 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
34 | 2016-07-12 | 2422 ~ 2462 | DTS - Digital Transmission System | |
35 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
36 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
37 | 2016-06-03 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
38 | JBP - Part 15 Class B Computing Device Peripheral | |||
39 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
40 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2017-08-28
|
|||||
2017-08-15
|
||||||
2017-05-30
|
||||||
2017-02-28
|
||||||
2017-02-23
|
||||||
2017-01-09
|
||||||
2016-12-14
|
||||||
2016-10-04
|
||||||
2016-10-03
|
||||||
2016-09-02
|
||||||
2016-08-19
|
||||||
2016-07-27
|
||||||
2016-07-12
|
||||||
2016-06-03
|
||||||
Applicant's complete, legal business name |
Intel Corporation
|
|||||
FCC Registration Number (FRN) |
0008035131
|
|||||
Physical Address |
100 Center Point Circle Suite 200
|
|||||
100 Center Point Circle
|
||||||
Columbia, SC
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
h******@acbcert.com
|
|||||
H******@acbcert.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
PD9
|
|||||
Equipment Product Code |
8265NGU
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
S**** C******** H********
|
|||||
Title |
Product Regulations Engineer
|
|||||
Telephone Number |
803-3********
|
|||||
Fax Number |
803-2********
|
|||||
s******@intel.com
|
||||||
Technical Contact | ||||||
Firm Name |
Intel Mobile Communications
|
|||||
RF Exposure Lab
|
||||||
Name |
S******** H****
|
|||||
J****** M******
|
||||||
Physical Address |
100 Center Point Circle Suite 200
|
|||||
802 North Twin Oaks Valley Rd.
|
||||||
100 Center Point Circle
|
||||||
802 N. Twin Oaks Valley Rd. Suite 105
|
||||||
Columbia, South Carolina 29210
|
||||||
San Marcos, 92069
|
||||||
Columbia, 29210
|
||||||
San Marcos, California 92069
|
||||||
United States
|
||||||
Telephone Number |
80321********
|
|||||
76047********
|
||||||
Fax Number |
80321********
|
|||||
76047********
|
||||||
80321********
|
||||||
s******@Intel.com
|
||||||
i******@rfexposurelab.com
|
||||||
S******@Intel.com
|
||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/24/2018 | |||||
02/11/2018 | ||||||
11/26/2017 | ||||||
08/26/2017 | ||||||
08/22/2017 | ||||||
07/09/2017 | ||||||
06/12/2017 | ||||||
04/02/2017 | ||||||
04/01/2017 | ||||||
03/01/2017 | ||||||
02/11/2017 | ||||||
01/23/2017 | ||||||
01/08/2017 | ||||||
11/30/2016 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DTS - Digital Transmission System | |||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
NII - Unlicensed National Information Infrastructure TX | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 8265 | |||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Purpose / Application is for | Class II Permissive Change | |||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.60W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model: P29S PC with WNC antennas part number 81EAA515.G71 (Main) & 81EAA515.G72 (Aux) and Hong Bo 260-24169 (Main) & 260-24170 (Aux). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | |||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.24W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model: P29S PC with WNC antennas part number 81EAA515.G71 (Main) & 81EAA515.G72 (Aux) and Hong Bo 260-24169 (Main) & 260-24170 (Aux). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.69W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model: P29S PC with WNC antennas part number 81EAA515.G71 (Main) & 81EAA515.G72 (Aux) and Hong Bo 260-24169 (Main) & 260-24170 (Aux). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.84W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P29S, with antennas HongBo part no 260-24167 (Tx1 & Tx2) and WNC part no 81EAA515.G56 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.84W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P29S, with antennas HongBo part no 260-24167 (Tx1 & Tx2) and WNC part no 81EAA515.G56 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.21W/kg and 0.84W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P29S, with antennas HongBo part no 260-24167 (Tx1 & Tx2) and WNC part no 81EAA515.G56 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.36W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number T02J, with antennas HongBo part no 260-24154 (Tx1) & 260-24155 (Tx2) and Auden part no A30713-30 (Tx1) & A30714-30 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number T02J, with antennas HongBo part no 260-24154 (Tx1) & 260-24155 (Tx2) and Auden part no A30713-30 (Tx1) & A30714-30 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number T02J, with antennas HongBo part no 260-24154 (Tx1) & 260-24155 (Tx2) and Auden part no A30713-30 (Tx1) & A30714-30 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 1.48W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P29S, with antennas HongBo part no 260-24120 (Tx1) & 260-24118 (Tx2), Ethertronics part no 5002345 (Tx1) & 5002359 (Tx2), Ethertronics part no 5002440 (Tx1) & 5002446 (Tx2) and WNC part no 81EAA515.G53 (Tx1) & 81EAA515.G54. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.48W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P29S, with antennas HongBo part no 260-24120 (Tx1) & 260-24118 (Tx2), Ethertronics part no 5002345 (Tx1) & 5002359 (Tx2), Ethertronics part no 5002440 (Tx1) & 5002446 (Tx2) and WNC part no 81EAA515.G53 (Tx1) & 81EAA515.G54. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.48W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P29S, with antennas HongBo part no 260-24120 (Tx1) & 260-24118 (Tx2), Ethertronics part no 5002345 (Tx1) & 5002359 (Tx2), Ethertronics part no 5002440 (Tx1) & 5002446 (Tx2) and WNC part no 81EAA515.G53 (Tx1) & 81EAA515.G54. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body SAR value is 0.18 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements. This change establishes portable category SAR conditions for the host platform Dell model T17G with Ethertronics antennas part numbers 5002680 (Main & Aux). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 1.45 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements. This change establishes portable category SAR conditions for the host platform Dell model T17G with Ethertronics antennas part numbers 5002680 (Main & Aux). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Highest reported Body SAR value is 0.70 W/kg and Simultaneous SAR meets with the 0.04 separation ratio requirements. This change establishes portable category SAR conditions for the host platform Dell model T17G with Ethertronics antennas part numbers 5002680 (Main & Aux). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the host platform Dell model: P56F and antennas Acon (PIFA) Main/Aux and TE (PIFA) Main/Aux. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the host platform Dell model: P56F and antennas Acon (PIFA) Main/Aux and TE (PIFA) Main/Aux. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.58W/kg respectively. This change establishes portable category SAR conditions for the host platform Dell model: P56F and antennas Acon (PIFA) Main/Aux and TE (PIFA) Main/Aux. Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets the requirements of KDB447498 and can be used in mobile configurations. Change is for the addition of new dipole type antenna. This antenna will be restricted to mobile category computers and stationary desktop computers. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets the requirements of KDB447498 and can be used in mobile configurations. Change is for the addition of new dipole type antenna. This antenna will be restricted to mobile category computers and stationary desktop computers. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. This device must utilize the BIOS Locking features. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets the requirements of KDB447498 and can be used in mobile configurations. Change is for the addition of new dipole type antenna. This antenna will be restricted to mobile category computers and stationary desktop computers. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device with enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.42W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P54G, with antennas Acon part no APL6Y-700000 (Tx1 & Tx2) and TE part no 1556694-2 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 1.20W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P54G, with antennas Acon part no APL6Y-700000 (Tx1 & Tx2) and TE part no 1556694-2 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.56W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number P54G, with antennas Acon part no APL6Y-700000 (Tx1 & Tx2) and TE part no 1556694-2 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device with enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P61F, with antennas Speed part no F.0G.FN-6038-003-00 (Tx1 & Tx2) and WNC part no 81EAA515.G27 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P61F, with antennas Speed part no F.0G.FN-6038-003-00 (Tx1 & Tx2) and WNC part no 81EAA515.G27 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.79W/kg and 1.44W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P61F, with antennas Speed part no F.0G.FN-6038-003-00 (Tx1 & Tx2) and WNC part no 81EAA515.G27 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.83W/kg and 1.21W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P74G, with antennas Speed part noF.0G.FN-6037-003-00 (Tx1 & Tx2) and WNC part no 81EAA515.G26 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.21W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P74G, with antennas Speed part noF.0G.FN-6037-003-00 (Tx1 & Tx2) and WNC part no 81EAA515.G26 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device with enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.21W/kg respectively. This change is to request approval for portable category specific host notebook PC, Dell model number : P74G, with antennas Speed part noF.0G.FN-6037-003-00 (Tx1 & Tx2) and WNC part no 81EAA515.G26 (Tx1 & Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.62W/kg and 1.36W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 710S-13IKB, with antennas HighTek part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2) and WNC part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.36W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 710S-13IKB, with antennas HighTek part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2) and WNC part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device with enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.29W/kg and 1.36W/kg respectively. This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad 710S-13IKB, with antennas HighTek part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2) and WNC part no 025.900G0.0011 (Tx1) & 025.900G1.0011 (Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.79W/kg and 1.53W/kg respectively. This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device with enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.53W/kg respectively. This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 1.53W/kg respectively. This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device with enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must utilize the BIOS Locking features as documented in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46W/kg and 0.91W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.78W/kg respectively. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
Intel Mobile Commmunications France S.A.S.
|
|||||
Name |
N**** A********
|
|||||
Telephone Number |
00334********
|
|||||
Fax Number |
00334********
|
|||||
n******@intel.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
3 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
3 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
3 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
3 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
3 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
3 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
3 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
5 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
5 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
5 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
5 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
5 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
5 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
5 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
5 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
5 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
5 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
5 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
7 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
7 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
7 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
7 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
7 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
9 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
9 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
10 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
10 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
10 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
10 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
10 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
10 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
10 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
10 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
10 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
10 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
10 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
14 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
14 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
14 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
14 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
14 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
14 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
14 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
14 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
14 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
14 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
14 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
17 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
17 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
17 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
17 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
17 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
17 | 9 | 15E | 38 CC M4 MO | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
17 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
17 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
17 | 12 | 15E | 49 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
17 | 13 | 15E | 49 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
17 | 14 | 15E | 49 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
19 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
19 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
21 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
21 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
21 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
21 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
21 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
21 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
21 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
21 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
21 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
21 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
21 | 12 | 15E | 49 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
21 | 13 | 15E | 49 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
21 | 14 | 15E | 49 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
22 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
22 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
22 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.169 | |||||||||||||||||||||||||||||||||||
22 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
22 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
22 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
22 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
22 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
22 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
22 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
22 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
22 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
22 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
25 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
25 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
25 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.159 | |||||||||||||||||||||||||||||||||||
25 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
25 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
25 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
25 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
25 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
25 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
25 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
25 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
25 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
25 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
27 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
27 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
28 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
28 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
30 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
30 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
30 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.159 | |||||||||||||||||||||||||||||||||||
30 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
30 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
30 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
30 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
30 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
30 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
30 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
30 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
30 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
30 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
31 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
31 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
32 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
33 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
33 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
33 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
33 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.159 | |||||||||||||||||||||||||||||||||||
33 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
33 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
33 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
33 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
33 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
33 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
33 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
33 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
33 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
33 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
34 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
34 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
34 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
35 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
35 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
35 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
35 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.159 | |||||||||||||||||||||||||||||||||||
35 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
35 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
35 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
35 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
35 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
35 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
35 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
35 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
35 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
35 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
36 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
37 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.161 | |||||||||||||||||||||||||||||||||||
37 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
37 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.021 | |||||||||||||||||||||||||||||||||||
37 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.159 | |||||||||||||||||||||||||||||||||||
37 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.166 | |||||||||||||||||||||||||||||||||||
37 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.027 | |||||||||||||||||||||||||||||||||||
37 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.108 | |||||||||||||||||||||||||||||||||||
37 | 8 | 15E | 38 CC MO ND | 5510 | 5670 | 0.119 | |||||||||||||||||||||||||||||||||||
37 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.215 | |||||||||||||||||||||||||||||||||||
37 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.133 | |||||||||||||||||||||||||||||||||||
37 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.107 | |||||||||||||||||||||||||||||||||||
37 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.227 | |||||||||||||||||||||||||||||||||||
37 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.227 | |||||||||||||||||||||||||||||||||||
37 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.092 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
38 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
39 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
39 | 2 | 15C | CC MO | 2412 | 2472 | 1 | |||||||||||||||||||||||||||||||||||
39 | 3 | 15C | CC MO | 2422 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
40 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0160000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC