app
s
|
Applicant Information
|
|
various
|
Effective |
2022-08-11
|
various
|
2022-04-25
|
various
|
2022-04-22
|
various
|
2022-04-04
|
various
|
2021-11-02
|
various
|
2021-05-05
|
various
|
2021-05-03
|
various
|
2021-02-05
|
various
|
2021-02-03
|
various
|
2020-10-06
|
various
|
2020-10-02
|
various
|
2020-10-01
|
various
|
2020-09-30
|
various
|
2020-09-29
|
various
|
2020-08-26
|
various
|
2020-08-17
|
various
|
2020-06-25
|
various
|
2020-05-18
|
various
|
2020-05-13
|
various
|
2020-03-26
|
various
|
2020-03-24
|
various
|
2020-03-18
|
various
|
2020-02-04
|
various
|
2020-01-24
|
various
|
2020-01-16
|
various
|
2019-12-17
|
various
|
2019-12-12
|
various
|
2019-11-21
|
various
|
2019-10-29
|
various
|
2019-10-24
|
various
|
2019-09-05
|
various
|
2019-09-04
|
various
|
2019-08-27
|
various
|
2019-08-20
|
various
|
2019-08-16
|
various
|
2019-08-15
|
various
|
2019-08-14
|
various
|
2019-08-12
|
various
|
2019-08-09
|
various
|
2019-08-02
|
various
|
2019-08-01
|
various
|
2019-07-31
|
various
|
2019-07-26
|
various
|
2019-07-15
|
various
|
2019-06-04
|
various
|
2019-05-21
|
various
|
2019-05-16
|
various
|
2019-05-15
|
various
|
2019-05-14
|
various
|
2019-05-01
|
various
|
2019-04-30
|
various
|
2019-04-16
|
various
|
2019-04-05
|
various
|
2019-04-02
|
various
|
2019-03-27
|
various
|
2019-03-26
|
various
|
2019-03-15
|
various
|
2019-03-13
|
various
|
2019-03-12
|
various
|
2019-03-11
|
various
|
2019-03-07
|
various
|
2019-03-06
|
various
|
2019-02-27
|
various
|
2019-02-26
|
various
|
2019-02-22
|
various
|
2019-02-12
|
various
|
2019-01-29
|
various
|
2019-01-28
|
various
|
2019-01-22
|
various
|
2019-01-21
|
various
|
2018-12-13
|
various
|
2018-11-14
|
various
|
2018-11-09
|
various
|
2018-11-08
|
various
|
2018-11-05
|
various
|
2018-09-17
|
various
|
2018-09-13
|
various
|
2018-09-12
|
various
|
2018-09-05
|
various
|
2018-09-04
|
various
|
2018-09-03
|
various
|
2018-08-31
|
various
|
2018-08-30
|
various
|
2018-08-29
|
various
|
2018-08-27
|
various
|
2018-06-26
|
various
|
2018-06-25
|
various
|
2018-06-08
|
various
|
2018-05-24
|
various
|
2018-03-06
|
various
|
2018-02-14
|
various
|
2018-01-30
|
various
|
2018-01-19
|
various
|
2018-01-17
|
various
|
2017-07-25
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0008035131
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
100 Center Point Circle
|
various
|
Columbia, SC
|
various
|
Columbia
|
various
|
Columbia, 29210
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
K******@sporton-usa.com
|
various
|
h******@acbcert.com
|
various
|
h******@ACBcert.com
|
various
|
H******@acbcert.com
|
various
|
c******@nacsemc.com
|
various
|
h******@atcbcert.com
|
various
|
h******@ACBcert.comi
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
9560NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S**** C**** H******
|
various
|
Title |
Product Regulations Engineer
|
various
|
Telephone Number |
803-3********
|
various
|
Fax Number |
803-2********
|
various
|
E-mail |
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Intel Mobile Communications
|
various
|
Intel Corporation
|
various
|
RF Exposure Lab
|
various
|
RF Expsoure Lab
|
various
|
RF Exposure lab
|
various
|
RF Exposure Labs
|
various
|
RF Exposure
|
various
|
Dekra Testing and Certification
|
various
|
Dekra Testing and Compliance
|
various
|
Name |
S****** C****** H******
|
various
|
S**** H******
|
various
|
J**** M******
|
various
|
J**** R****** M******
|
various
|
S****** H********
|
various
|
V****** W****
|
various
|
Physical Address |
100 Center Point Circle
|
various
|
100 Center Point Circle Suite 200
|
various
|
802 N. Twin Oaks Valley Road, Suite 105
|
various
|
No. 5-22, Ruishukeng, Linkou Dist.
|
various
|
No. 5.22, Ruishukeng, Linkou Dist.
|
various
|
802 North Twin Oaks Valley Rd.
|
various
|
Columbia, 29212
|
various
|
Columbia, South Carolina 29210
|
various
|
Columbia, 29210
|
various
|
San Marcos, California 92069
|
various
|
San Marcos, 92069
|
various
|
Columbia, California 92069
|
various
|
San Marcos, Arizona 92069
|
various
|
San Marcos, South Carolina 92069
|
various
|
Columbia, California 29210
|
various
|
Columbia, Arizona 29210
|
various
|
New Taipei City, 24451
|
various
|
United States
|
various
|
Taiwan
|
various
|
Telephone Number |
80321********
|
various
|
80331********
|
various
|
76047********
|
various
|
+7604********
|
various
|
76041********
|
various
|
+1760********
|
various
|
+1803********
|
various
|
+1760********
|
various
|
+1803********
|
various
|
+1803********
|
various
|
760-4********
|
various
|
88622******** Extension:
|
various
|
Fax Number |
80321********
|
various
|
760-4********
|
various
|
88622********
|
various
|
E-mail |
s******@intel.com
|
various
|
i******@rfexposurelab.com
|
various
|
s******@Intel.com
|
various
|
v******@dekra.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Intel Corporation
|
various
|
Name |
G******** C****
|
various
|
g******** C******
|
various
|
Physical Address |
425 rue de Goa
|
various
|
Antibes, 06600
|
various
|
France
|
various
|
Telephone Number |
+3349********
|
various
|
E-mail |
g******@intel.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/08/2023 |
various | 10/22/2022 |
various | 10/19/2022 |
various | 10/01/2022 |
various | 05/01/2022 |
various | 11/01/2021 |
various | 10/30/2021 |
various | 08/04/2021 |
various | 08/02/2021 |
various | 04/04/2021 |
various | 03/31/2021 |
various | 03/30/2021 |
various | 03/29/2021 |
various | 03/28/2021 |
various | 02/22/2021 |
various | 02/13/2021 |
various | 12/22/2020 |
various | 11/14/2020 |
various | 11/09/2020 |
various | 09/20/2020 |
various | 09/15/2020 |
various | 09/14/2020 |
various | 08/02/2020 |
various | 07/22/2020 |
various | 07/14/2020 |
various | 06/14/2020 |
various | 06/09/2020 |
various | 05/19/2020 |
various | 04/26/2020 |
various | 04/21/2020 |
various | 03/03/2020 |
various | 03/02/2020 |
various | 02/23/2020 |
various | 02/16/2020 |
various | 02/12/2020 |
various | 02/11/2020 |
various | 02/10/2020 |
various | 02/09/2020 |
various | 02/05/2020 |
various | 02/04/2020 |
various | 01/29/2020 |
various | 01/28/2020 |
various | 01/27/2020 |
various | 01/22/2020 |
various | 01/11/2020 |
various | 11/30/2019 |
various | 11/17/2019 |
various | 11/12/2019 |
various | 11/11/2019 |
various | 11/09/2019 |
various | 11/10/2019 |
various | 10/27/2019 |
various | 10/12/2019 |
various | 10/02/2019 |
various | 09/29/2019 |
various | 09/22/2019 |
various | 09/21/2019 |
various | 09/10/2019 |
various | 09/09/2019 |
various | 09/08/2019 |
various | 09/07/2019 |
various | 09/02/2019 |
various | 09/01/2019 |
various | 08/26/2019 |
various | 08/24/2019 |
various | 08/21/2019 |
various | 08/11/2019 |
various | 07/28/2019 |
various | 07/27/2019 |
various | 07/21/2019 |
various | 07/17/2019 |
various | 06/11/2019 |
various | 05/13/2019 |
various | 05/08/2019 |
various | 05/07/2019 |
various | 05/04/2019 |
various | 03/16/2019 |
various | 03/12/2019 |
various | 03/11/2019 |
various | 03/04/2019 |
various | 03/03/2019 |
various | 02/28/2019 |
various | 02/26/2019 |
various | 02/25/2019 |
various | 02/24/2019 |
various | 02/23/2019 |
various | 12/23/2018 |
various | 12/22/2018 |
various | 12/05/2018 |
various | 11/20/2018 |
various | 09/02/2018 |
various | 08/13/2018 |
various | 07/28/2018 |
various | 07/25/2018 |
various | 07/16/2018 |
various | 01/21/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 9560 |
various | Intel Wireless - AC 9560 |
various | Intel Dual Band Wireless - AC 9560 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Limited Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo ThinkBook 14 G4 IAP PC. The highest reported Body and Simultaneous SAR values are 0.40 W/kg and 0.79 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This C2PC establishes portable category SAR conditions for the Lenovo ThinkBook 14 G4 IAP PC. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.79 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This C2PC establishes portable category SAR conditions for the Lenovo ThinkBook 14 G4 IAP PC. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 0.96 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and
DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 15 G4 IAP PC with Southstar DC33002O200 and DC33002O210 and High-Tek DC33002O300 and DC33002O310 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 14IAP7 PC with AWAN YP6Y-200046 and HighTek DC33002OI00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 14IAP7 PC with AWAN YP6Y-200046 and HighTek DC33002OI00 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model 14IAP7 PC with AWAN YP6Y-200046 and HighTek
DC33002OI00 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with High-Tek DC33002O100 and SOUTHSTAR DC33002O000 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the
Lenovo model ThinkBook 14 G4 IAP PC with Hig-Tek DC33002O100 and
SOUTHSTAR DC33002O000 antennas.
Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model ThinkBook 14 G4 IAP PC with Hig-Tek DC33002O100 and SOUTHSTAR DC33002O000 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.25W/kg respectively.
This change establishes portable category SAR conditions for the HP
model HSN-I47C PC with WNC 6036B0315601 and 6036B0315601 and Hong-Bo
6036B0316701 and 6036B0316701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.25W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I47C PC with WNC 6036B0315601 and 6036B0315601 and Hong-Bo 6036B0316701 and 6036B0316701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.25W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I47C PC with WNC 6036B0315601 and 6036B0315601 and Hong-Bo 6036B0316701 and 6036B0316701 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P107F PC with Speed 025.901SZ.0001 and 025.901UV.0001 and Hong-Bo 260-29073 and 260-29078 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive change application, containing
appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P107F PC with Speed 025.901SZ.0001 and 025.901UV.0001 and Hong-Bo 260-29073 and 260-29078 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying with FCC
multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. End-users and installers must be provided with
transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.12W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P107F PC with Speed 025.901SZ.0001 and 025.901UV.0001 and Hong-Bo
260-29073 and 260-29078 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P106F PC with Speed 025.901SX.0001 and 025.901UU.0001 and Hong- Bo 025.901SX.0011 and 025.901UU.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as
shown in filings under this FCC ID.
The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P106F PC with Speed 025.901SX.0001 and 025.901UU.0001 and Hong- Bo 025.901SX.0011 and 025.901UU.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Dell
model P106F PC with Speed 025.901SX.0001 and 025.901UU.0001 and Hong-
Bo 025.901SX.0011 and 025.901UU.0011 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the HP HSN-I40C PC with WNC 81EABB15.G31 (TX1) and 81EABB15.G30 (TX2) and HongBo 260-27344 (TX1) and 260-27343 (TX2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described
in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the HP HSN-I40C PC with WNC 81EABB15.G31 (TX1) and 81EABB15.G30 (TX2) and HongBo 260-27344 (TX1) and 260-27343 (TX2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the HP HSN-I40C PC with WNC 81EABB15.G31 (TX1) and 81EABB15.G30 (TX2) and HongBo 260-27344 (TX1) and 260-27343 (TX2) antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 Pro 14ITL6 PC with Hightek 0ACCN020007N and Maglayers PCA-3010-25GC7-A2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
1.05W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 Pro 14ITL6 PC with Hightek 0ACCN020007N and Maglayers PCA-3010-25GC7-A2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multitransmitter product procedures. Grantee must provide installation and operating instructions
for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 Pro 14ITL6 PC with Hightek 0ACCN020007N and Maglayers
PCA-3010-25GC7-A2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14s Yoga ITL PC with HighTek 0ACCN020003N Tx1 and 0ACCN020004N Tx2 antennas and Southstar N12-6584-R0A Tx1 and N12-6585-R0A Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14s Yoga ITL PC with HighTek 0ACCN020003N Tx1 and 0ACCN020004N Tx2 antennas and Southstar N12-6584-R0A Tx1 and N12-6585-R0A Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14s Yoga ITL PC with HighTek 0ACCN020003N Tx1 and 0ACCN020004N Tx2 antennas and Southstar N12-6584-R0A Tx1 and N12-6585-R0A Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 15 G2 ITL PC with HighTek 0ACCN020001N Tx1 and 0ACCN020002N Tx2 antennas and Mag Layer PCA-3010-25GC7-A1 Tx1 and PCA-5010-25GC7-A1 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.84W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 15 G2 ITL PC with HighTek 0ACCN020001N Tx1 and 0ACCN020002N Tx2 antennas and Mag Layer PCA-3010-25GC7-A1 Tx1 and PCA-5010-25GC7-A1 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest
reported Body and Simultaneous SAR values are 0.07W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 15 G2 ITL PC with HighTek 0ACCN020001N Tx1 and 0ACCN020002N Tx2 antennas and Mag Layer PCA-3010-25GC7-A1 Tx1 and PCA-5010-25GC7-A1 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 7 15ITL5 PC with Awan DC33001P300 Tx1/ DC33001P310 Tx2 antennas and HongBo DC33001NZ00 Tx1/ DC33001NZ10 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 7 15ITL5 PC with Awan DC33001P300 Tx1/ DC33001P310 Tx2 antennas and HongBo DC33001NZ00 Tx1/ DC33001NZ10 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.10W/kg and 1.46W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 7 15ITL5 PC with Awan DC33001P300 Tx1/ DC33001P310 Tx2 antennas and HongBo DC33001NZ00 Tx1/ DC33001NZ10 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 7 14ITL5 PC with Awan DC33001P200 Tx1/DC33001P210 Tx2 antennas and Luxshare DC33001NW00 Tx1/DC33001NW10 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.37W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 7 14ITL5 PC with Awan DC33001P200 Tx1/DC33001P210 Tx2 antennas and Luxshare DC33001NW00 Tx1/DC33001NW10 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported
Body and Simultaneous SAR values are 0.14W/kg and 1.53W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Yoga 7 14ITL5 PC with Awan DC33001P200 Tx1/DC33001P210 Tx2 antennas and Luxshare DC33001NW00 Tx1/DC33001NW10 Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.79W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14 G2 ITL PC with Mag Layer PCA-8020-25GC7-A1 Tx1/Tx2 antennas and Yageo ANTA0LC13952WLAN1 Tx1/Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14 G2 ITL PC with Mag Layer PCA-8020-25GC7-A1 Tx1/Tx2 antennas and Yageo ANTA0LC13952WLAN1 Tx1/Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.54W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14 G2 ITL PC with Mag Layer PCA-8020-25GC7-A1 Tx1/Tx2 antennas and Yageo ANTA0LC13952WLAN1 Tx1/Tx2 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q251 PC with HighTek DQ60ACQD086 and Inpaq DQ60PLBLB43 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are
0.97W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q251 PC with HighTek DQ60ACQD086 and Inpaq DQ60PLBLB43 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.30W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q251 PC with HighTek DQ60ACQD086 and Inpaq DQ60PLBLB43 antennas.
Antenna(s) is/are of the same type and lower gain from original approval. SAR
testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.33W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00114B, with antenna AWAN part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.33W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Lenovo model number - TP00114B, with antenna AWAN
part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.33W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00114B, with antenna AWAN part no 025.901JG.0021 (Tx1) and 025.901JH.0021 (Tx2).
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P100F PC with AWAN AYP6Y-200006 (Tx1 and Tx2) and
Speed F.0G.LS-6010-003-00 (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P100F PC with AWAN AYP6Y-200006 (Tx1 and Tx2) and Speed F.0G.LS-6010-003-00 (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P100F PC with AWAN AYP6Y-200006 (Tx1 and Tx2) and Speed F.0G.LS-6010-003-00 (Tx1 and Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for
the Lenovo Thinkbook 14-IML PC with WNC 81EAA615.G48 Tx1 and Tx2
antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14-IML PC with WNC 81EAA615.G48 Tx1 and Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Thinkbook 14-IML PC with WNC 81EAA615.G48 Tx1 and Tx2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P102F PC with WNC 025.901MV.0011 (Tx1)and
025.901MU.0011 (Tx2) and HongBo 260-29053 (Tx1) and 260-29052
(Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.60W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P102F PC with WNC 025.901MV.0011 (Tx1)and 025.901MU.0011 (Tx2) and HongBo 260-29053 (Tx1) and 260-29052 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.29W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P102F PC with WNC 025.901MV.0011 (Tx1)and 025.901MU.0011 (Tx2) and HongBo 260-29053 (Tx1) and 260-29052 (Tx2) antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.57W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P126G, with antennas HongBo part
no 260-27408 (Tx1) and 260-27409 (Tx2) and WNC part no
025.901ND.0011 (Tx1) and 025.901NE.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR
testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.57W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27408 (Tx1) and 260-27409 (Tx2) and WNC part no 025.901ND.0011 (Tx1) and 025.901NE.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.57W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27408 (Tx1) and 260-27409 (Tx2) and WNC part no 025.901ND.0011 (Tx1) and 025.901NE.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.37W/kg respectively.
This change is to request approval for portable category specific
host notebook PC, Dell model number - P126G, with antennas HongBo part
no 260-27414 (Tx1) and 260-27413 (Tx2) and WNC part no
025.901NB.0011 (Tx1) and 025.901NC.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.37W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27414 (Tx1) and 260-27413 (Tx2) and WNC part no 025.901NB.0011 (Tx1) and 025.901NC.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.37W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P126G, with antennas HongBo part no 260-27414 (Tx1) and 260-27413 (Tx2) and WNC part no 025.901NB.0011 (Tx1) and 025.901NC.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.91W/kg respectively.
This change establishes portable category SAR conditions for
the Lenovo IdeaPad 3 CB 11IGL05 with Speed DC33001NG00 antennas
(Tx1 and Tx2) and ICT DC33001NH00 antennas (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures.
This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled
for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.91W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 3 CB 11IGL05 with Speed DC33001NG00 antennas (Tx1 and Tx2) and ICT DC33001NH00 antennas (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.91W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 3 CB 11IGL05 with Speed DC33001NG00 antennas (Tx1 and Tx2) and ICT DC33001NH00 antennas (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.89W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 14IIL05 metal sku Yageo DC33002E100 and DC33002E110 and Hightek DC33002E000 and DC33002E010 antennas.
Lenovo IdeaPad 5 14IIL05 plastic sku Yageo DC33002E120 and DC33002E130 and Hightek DC33002E020 and DC33002E030 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 14IIL05 metal sku Yageo DC33002E100 and DC33002E110 and Hightek DC33002E000 and DC33002E010 antennas.
Lenovo IdeaPad 5 14IIL05 plastic sku Yageo DC33002E120 and DC33002E130 and Hightek DC33002E020 and DC33002E030 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad 5 14IIL05 metal sku Yageo DC33002E100 and DC33002E110 and Hightek DC33002E000 and DC33002E010 antennas.
Lenovo IdeaPad 5 14IIL05 plastic sku Yageo DC33002E120 and DC33002E130 and Hightek DC33002E020 and DC33002E030 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for
the Lenovo IdeaPad Flex 3-11IGL05 PC with Southstar N12-6280-R0A and
N12-6281-R0A and Inpaq WA-F-LB-02-207 and WA-F-LB-01-081 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.49W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad Flex 3-11IGL05 PC with Southstar N12-6280-R0A and N12-6281-R0A and Inpaq WA-F-LB-02-207 and WA-F-LB-01-081 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator
must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.41W/kg and 1.56W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad Flex 3-11IGL05 PC with Southstar N12-6280-R0A and N12-6281-R0A and Inpaq WA-F-LB-02-207 and WA-F-LB-01-081 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.48W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C146 PC with WNC 81EAA415.GJP/81EAA415.GJQ and Inpaq WA-P-LB-02-709/WA-P-LB-02-710 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.20W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C146 PC with WNC 81EAA415.GJP/81EAA415.GJQ and Inpaq WA-P-LB-02-709/WA-P-LB-02-710 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.24W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-C146 PC with WNC 81EAA415.GJP/81EAA415.GJQ and Inpaq WA-P-LB-02-709/WA-P-LB-02-710 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for
the Dell model P118G PC with WNC 025.901LE.0001 and HongBo
025.901LE.0011 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When
all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions
and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 1.16W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P118G PC with WNC 025.901LE.0001 and HongBo 025.901LE.0011 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.27W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P118G PC with WNC 025.901LE.0001 and HongBo 025.901LE.0011 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for
the HP model TPN-Q233 PC with WNC 81EABB15.G71 and HiTek
0ACQD019041N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q233 PC with WNC 81EABB15.G71 and HiTek 0ACQD019041N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-Q233 PC with WNC 81EABB15.G71 and HiTek 0ACQD019041N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are <0.01W/kg and 0.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Legion Y740S-15IRH PC with Southstar N0Z-1265-R0A and N0Z-1265-R0A and HiTek 0ACCN019003N and 0ACCN019003N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.06W/kg and 0.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Legion Y740S-15IRH PC with Southstar N0Z-1265-R0A and N0Z-1265-R0A and HiTek 0ACCN019003N and 0ACCN019003N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 0.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Legion Y740S-15IRH PC with Southstar N0Z-1265-R0A and N0Z-1265-R0A and HiTek 0ACCN019003N and 0ACCN019003N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.13W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P100G PC with Ethertronics part no. 5003895 Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.13W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P100G PC with Ethertronics part no. 5003895 Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.13W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P100G PC with Ethertronics part no. 5003895 Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I33C PC with WNC 6036B0248401 and 6036B0248501 and HongBo 6036B0248301 and 6036B0248201 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.36W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I33C PC with WNC 6036B0248401 and 6036B0248501 and HongBo 6036B0248301 and 6036B0248201 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.42W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I33C PC with WNC 6036B0248401 and 6036B0248501 and HongBo 6036B0248301 and 6036B0248201 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 15-IML, with antennas WNC part no DQ6615G4900 (Tx1 and Tx2) and WNC part no DQ6615G5000 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 0.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 15-IML, with antennas WNC part no DQ6615G4900 (Tx1 and Tx2) and WNC part no DQ6615G5000 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-13IML, with antenna ICT part no DC33001LX00 (Tx1 and Tx2) and Speedwire part no DC33001LV00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-13IML, with antenna ICT part no DC33001LX00 (Tx1 and Tx2) and Speedwire part no DC33001LV00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-13IML, with antenna ICT part no DC33001LX00 (Tx1 and Tx2) and Speedwire part no DC33001LV00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 15-IML, with antennas WNC part no DQ6615G4900 (Tx1 and Tx2) and WNC part no DQ6615G5000 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.07W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 14-IML, with antennas WNC part no DQ6615G4800 (Tx1 and Tx2) and WNC part no DQ6615G4700 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.07W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 14-IML, with antennas WNC part no DQ6615G4800 (Tx1 and Tx2) and WNC part no DQ6615G4700 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.07W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo ThinkBook 14-IML, with antennas WNC part no DQ6615G4800 (Tx1 and Tx2) and WNC part no DQ6615G4700 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.28W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00117A, with antenna HongBo part no DC33001LJ00 (Tx1 and Tx2), ICT part no DC33001LG00 (Tx1 and Tx2) and Speedwire part no DC33001LH00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.28W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00117A, with antenna HongBo part no DC33001LJ00 (Tx1 and Tx2), ICT part no DC33001LG00 (Tx1 and Tx2) and Speedwire part no DC33001LH00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.28W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00117A, with antenna HongBo part no DC33001LJ00 (Tx1 and Tx2), ICT part no DC33001LG00 (Tx1 and Tx2) and Speedwire part no DC33001LH00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz
band operations as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.32W/kg and 1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00116A, with antenna Amphenol part no DC33001LF00 (Tx1 and Tx2), ICT part no DC33001LB00 (Tx1 and Tx2) and Speedwire part no DC33001LE00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and
1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00116A, with antenna Amphenol part no DC33001LF00 (Tx1 and Tx2), ICT part no
DC33001LB00 (Tx1 and Tx2) and Speedwire part no DC33001LE00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo TP00116A, with antenna Amphenol part no DC33001LF00 (Tx1 and Tx2), ICT part no DC33001LB00 (Tx1 and Tx2) and Speedwire part no DC33001LE00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00114A, with antenna Auden part no 025.901JG.0001 (Tx1) and 025.901JH.0001 (Tx2) and HighTek part no 025.901JG.0011 (Tx1) and 025.901JH.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00114A, with antenna Auden part no 025.901JG.0001 (Tx1) and 025.901JH.0001 (Tx2) and HighTek part no 025.901JG.0011 (Tx1) and 025.901JH.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00114A, with antenna Auden part no 025.901JG.0001 (Tx1) and 025.901JH.0001 (Tx2) and HighTek part no 025.901JG.0011 (Tx1) and 025.901JH.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Class II Permissive Change for adding one new portable host platform (Model: Lenovo Yoga C640-13IML, 81UE; Brand: Lenovo), which contains one module (FCC ID: PD99560NG) as described in this filing. The highest reported SAR value for Tablet PC Mode, Laptop PC Mode, and simultaneously transmitting exposure conditions are 0.77 W/kg, 0.26 W/kg, and 1.02 W/kg (respectively).
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antenna Speedwire part no 025.901JA.0001 (Tx1) and 025.901JB.0001 (Tx2) and WNC part no 025.901JA.0011 (Tx1) and 025.901JB.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported
Body and Simultaneous SAR values are 0.76W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antenna Speedwire part no 025.901JA.0001 (Tx1) and 025.901JB.0001 (Tx2) and WNC part no 025.901JA.0011 (Tx1) and 025.901JB.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antenna Speedwire part no 025.901JA.0001 (Tx1) and 025.901JB.0001 (Tx2) and WNC part no 025.901JA.0011 (Tx1) and 025.901JB.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Class II Permissive Change for adding one new portable host platform (Model: Lenovo Yoga C640-13IML, 81UE; Brand: Lenovo), which contains one module (FCC ID: PD99560NG) as described in this filing. The highest reported SAR value for Tablet PC Mode, Laptop PC Mode, and simultaneously transmitting exposure conditions are 0.25 W/kg, 0.06 W/kg, and 1.02 W/kg (respectively).
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Class II Permissive Change for adding one new portable host platform (Model: Lenovo Yoga C640-13IML, 81UE; Brand: Lenovo), which contains one module (FCC ID: PD99560NG) as described in this filing. The highest reported SAR value for Tablet PC Mode, Laptop PC Mode, and simultaneously transmitting exposure conditions are 0.85 W/kg, 0.40 W/kg, and 1.02 W/kg (respectively).
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P116G, with antennas HongBo part no 260-27337 (Tx1) and 260-27338 (Tx2), WNC part no 025.901JU.0001 (Tx1) and 025.901JZ.0001 (Tx2), HongBo part no 260-27339 (Tx1) and 260-27340 (Tx2) and WNC part no 025.901JX.0001 (Tx1) and 025.901K2.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P116G, with antennas HongBo part no 260-27337 (Tx1) and 260-27338 (Tx2), WNC part no 025.901JU.0001 (Tx1) and 025.901JZ.0001 (Tx2), HongBo part no 260-27339 (Tx1) and 260-27340 (Tx2) and WNC part no 025.901JX.0001 (Tx1) and 025.901K2.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P116G, with antennas HongBo part no 260-27337 (Tx1) and 260-27338 (Tx2), WNC part no 025.901JU.0001 (Tx1) and 025.901JZ.0001 (Tx2), HongBo part no 260-27339 (Tx1) and 260-27340 (Tx2) and WNC part no 025.901JX.0001 (Tx1) and 025.901K2.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P88F, with antennas Speedwire part no F.0G.FS-6082-001-00 (Tx1) and F.0G.FS-6082-001-00 (Tx2), WNC part no 025.901JT.0001 (Tx1) and 025.901JY.0001 (Tx2), Speedwire part no F.0G.FS-6083-001-00 (Tx1) and F.0G.FS-6083-002-00 (Tx2) and WNC part no 025.901K0.0001 (Tx1) and 025.901K1.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P88F, with antennas Speedwire part no F.0G.FS-6082-001-00 (Tx1) and F.0G.FS-6082-001-00 (Tx2), WNC part no 025.901JT.0001 (Tx1) and 025.901JY.0001 (Tx2), Speedwire part no F.0G.FS-6083-001-00 (Tx1) and F.0G.FS-6083-002-00 (Tx2) and WNC part no 025.901K0.0001 (Tx1) and 025.901K1.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P42E, with antenna HongBo part no 260-27329 (Tx1) and 260-27330 (Tx2) and WNC part no 025.901JV.0011 (Tx1) and 025.901JW.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-15IRH, with antenna AWAN part no 025.901K5.0011 (Tx1 and Tx2) and ICT part no 025.901K5.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-15IRH, with antenna AWAN part no 025.901K5.0011 (Tx1 and Tx2) and ICT part no 025.901K5.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C940-15IRH, with antenna AWAN part no 025.901K5.0011 (Tx1 and Tx2) and ICT part no 025.901K5.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P42E, with antenna HongBo part no 260-27329 (Tx1) and 260-27330 (Tx2) and WNC part no 025.901JV.0011 (Tx1) and 025.901JW.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P88F, with antennas Speedwire part no F.0G.FS-6082-001-00 (Tx1) and F.0G.FS-6082-001-00 (Tx2), WNC part no 025.901JT.0001 (Tx1) and 025.901JY.0001 (Tx2), Speedwire part no F.0G.FS-6083-001-00 (Tx1) and F.0G.FS-6083-002-00 (Tx2) and WNC part no 025.901K0.0001 (Tx1) and 025.901K1.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P42E, with antenna HongBo part no 260-27329 (Tx1) and 260-27330 (Tx2) and WNC part no 025.901JV.0011 (Tx1) and 025.901JW.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q23C, with antenna WNC part no 81EABB15.G08 (Tx1 and Tx2) and WNC part no 81EABB15.G09 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q23C, with antenna WNC part no 81EABB15.G08 (Tx1 and Tx2) and WNC part no 81EABB15.G09 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q23C, with antenna WNC part no 81EABB15.G08 (Tx1 and Tx2) and WNC part no 81EABB15.G09 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.40W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q22C, with antenna WNC part no 81EABB15.G20 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.40W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q22C, with antenna WNC part no 81EABB15.G20 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.30W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q21C, with antenna WNC part no 81EABB15.G14 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.30W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q21C, with antenna WNC part no 81EABB15.G14 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.30W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q21C, with antenna WNC part no 81EABB15.G14 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C740-15IML, with antenna AWAN part no DC33001L900 (Tx1) and DC33001L910 (Tx2) and Pulse part no DC33001LC00 (Tx1) and DC33001LC10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C740-15IML, with antenna AWAN part no DC33001L900 (Tx1) and DC33001L910 (Tx2) and Pulse part no DC33001LC00 (Tx1) and DC33001LC10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C740-15IML, with antenna AWAN part no DC33001L900 (Tx1) and DC33001L910 (Tx2) and Pulse part no DC33001LC00 (Tx1) and DC33001LC10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C740-14IML, with antenna AWAN part no DC33001LA00 (Tx1) and DC33001LA10 (Tx2) and Pulse part no DC33001LD00 (Tx1) and DC33001LD10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C740-14IML, with antenna AWAN part no DC33001LA00 (Tx1) and DC33001LA10 (Tx2) and Pulse part no DC33001LD00 (Tx1) and DC33001LD10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Yoga C740-14IML, with antenna AWAN part no DC33001LA00 (Tx1) and DC33001LA10 (Tx2) and Pulse part no DC33001LD00 (Tx1) and DC33001LD10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S740-15IRH, with antenna HighTek part no 0ACCN018043N (Tx1 and Tx2) and Yageo part no ANTA0LC13472WLAN1 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S740-15IRH, with antenna HighTek part no 0ACCN018043N (Tx1 and Tx2) and Yageo part no ANTA0LC13472WLAN1 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.60W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S740-15IRH, with antenna HighTek part no 0ACCN018043N (Tx1 and Tx2) and Yageo part no ANTA0LC13472WLAN1 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-15IWL GTX, with antenna Southstar part no N0Z-1249-R0A (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-15IWL GTX, with antenna Southstar part no N0Z-1249-R0A (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S540-15IWL GTX, with antenna Southstar part no N0Z-1249-R0A (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.31W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Chromebook C340-11, with antenna Inpaq part no WA-F-LB-02-191 (Tx1) and WA-F-LB-01-075 (Tx2) and Southstar part no N12-5821-R0A (Tx1) and N12-5822-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.23W/kg and 1.31W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Chromebook C340-11, with antenna Inpaq part no WA-F-LB-02-191 (Tx1) and WA-F-LB-01-075 (Tx2) and Southstar part no N12-5821-R0A (Tx1) and N12-5822-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.31W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Chromebook C340-11, with antenna Inpaq part no WA-F-LB-02-191 (Tx1) and WA-F-LB-01-075 (Tx2) and Southstar part no N12-5821-R0A (Tx1) and N12-5822-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Dell P83F with Antennas HongBo 260-26218 Main and 260-26219 Aux and for configurations with AWAN AYP6Y-100000 main and AYP6Y-100001 aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Dell P83F with Antennas HongBo 260-26218 Main and 260-26219 Aux and for configurations with AWAN AYP6Y-100000 main and AYP6Y-100001 aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Dell P83F with Antennas HongBo 260-26218 Main and 260-26219 Aux and for configurations with AWAN AYP6Y-100000 main and AYP6Y-100001 aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.35W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antenna Speedwire part no F.0G.FS-6076-001-00 (Tx1) and F.0G.FS-6076-002-00 (Tx2) and WNC part no 025.901ID.0001 (Tx1) and 025.901IE.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Chromebook S340-14, with antenna Inpaq part no WA-P-LB-02-656 (Tx1) and WA-P-LB-01-231 (Tx2) and Southstar part no N12-5748-R0A (Tx1) and N12-5749-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.35W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antenna Speedwire part no F.0G.FS-6076-001-00 (Tx1) and F.0G.FS-6076-002-00 (Tx2) and WNC part no 025.901ID.0001 (Tx1) and 025.901IE.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Chromebook S340-14, with antenna Inpaq part no WA-P-LB-02-656 (Tx1) and WA-P-LB-01-231 (Tx2) and Southstar part no N12-5748-R0A (Tx1) and N12-5749-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.35W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P114G, with antenna Speedwire part no F.0G.FS-6076-001-00 (Tx1) and F.0G.FS-6076-002-00 (Tx2) and WNC part no 025.901ID.0001 (Tx1) and 025.901IE.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Chromebook S340-14, with antenna Inpaq part no WA-P-LB-02-656 (Tx1) and WA-P-LB-01-231 (Tx2) and Southstar part no N12-5748-R0A (Tx1) and N12-5749-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.26W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P99G, with antenna Ethertronics part no 5003436 (Tx1 and Tx2), HongBo part no 260-24227 (Tx1 and Tx2), Speedwire part no F.0G.FH-6073-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G42 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P99G, with antenna Ethertronics part no 5003436 (Tx1 and Tx2), HongBo part no 260-24227 (Tx1 and Tx2), Speedwire part no F.0G.FH-6073-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G42 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.82W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P99G, with antenna Ethertronics part no 5003436 (Tx1 and Tx2), HongBo part no 260-24227 (Tx1 and Tx2), Speedwire part no F.0G.FH-6073-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G42 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P100G, with antenna Ethertronics part no 5003384 (Tx1 and Tx2), HongBo part no 260-24229 (Tx1 and Tx2), Speedwire part no F.0G.FH-6074-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G62 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P100G, with antenna Ethertronics part no 5003384 (Tx1 and Tx2), HongBo part no 260-24229 (Tx1 and Tx2), Speedwire part no F.0G.FH-6074-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G62 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P100G, with antenna Ethertronics part no 5003384 (Tx1 and Tx2), HongBo part no 260-24229 (Tx1 and Tx2), Speedwire part no F.0G.FH-6074-001-00 (Tx1 and Tx2) and WNC part no 81ELAQ15.G62 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.48W/kg and 1.23W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Legion Y540-17IRH, with antenna Amphenol part no DC33001KX00 (Tx1 and Tx2) and Speedwire part no DC33001KV00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.23W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Legion Y540-17IRH, with antenna Amphenol part no DC33001KX00 (Tx1 and Tx2) and Speedwire part no DC33001KV00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.23W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Legion Y540-17IRH, with antenna Amphenol part no DC33001KX00 (Tx1 and Tx2) and Speedwire part no DC33001KV00 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Thinkbook 14s-IWL, with antenna Inpaq part no WA-F-LB-02-162 (Tx1) and WA-F-LB-03-103 (Tx2) and South Star part no N12-4487-R0A (Tx1) and N12-4486-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Thinkbook 14s-IWL, with antenna Inpaq part no WA-F-LB-02-162 (Tx1) and WA-F-LB-03-103 (Tx2) and South Star part no N12-4487-R0A (Tx1) and N12-4486-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.10W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Thinkbook 14s-IWL, with antenna Inpaq part no WA-F-LB-02-162 (Tx1) and WA-F-LB-03-103 (Tx2) and South Star part no N12-4487-R0A (Tx1) and N12-4486-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Thinkbook 13s-IWL, with antenna Inpaq part no WA-F-LB-02-161 (Tx1) and WA-F-LB-03-102 (Tx2) and South Star part no N12-4485-R0A (Tx1) and N12-4484-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Thinkbook 13s-IWL, with antenna Inpaq part no WA-F-LB-02-161 (Tx1) and WA-F-LB-03-102 (Tx2) and South Star part no N12-4485-R0A (Tx1) and N12-4484-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.68W/kg and 1.56W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo Thinkbook 13s-IWL, with antenna Inpaq part no WA-F-LB-02-161 (Tx1) and WA-F-LB-03-102 (Tx2) and South Star part no N12-4485-R0A (Tx1) and N12-4484-R0A (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.38W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P113G, with antenna HongBo part no 260-27309 (Tx1 and Tx2) and WNC part no 025.901HG.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.38W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P113G, with antenna HongBo part no 260-27309 (Tx1 and Tx2) and WNC part no 025.901HG.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 1.38W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P113G, with antenna HongBo part no 260-27309 (Tx1 and Tx2) and WNC part no 025.901HG.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P84F, with antenna HongBo part no 260-27310 (Tx1) and 260-27327 (Tx2) and WNC part no 025.901HH.0001 (Tx1) and 025.901HJ.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P84F, with antenna HongBo part no 260-27310 (Tx1) and 260-27327 (Tx2) and WNC part no 025.901HH.0001 (Tx1) and 025.901HJ.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P84F, with antenna HongBo part no 260-27310 (Tx1) and 260-27327 (Tx2) and WNC part no 025.901HH.0001 (Tx1) and 025.901HJ.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Dell T04J with HongBo 260-24225 Main and Aux antennas for configurations with and without NFC antennas installed.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Dell T04J with HongBo 260-24225 Main and Aux antennas for configurations with and without NFC antennas installed.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Dell T04J with HongBo 260-24225 Main and Aux antennas for configurations with and without NFC antennas installed.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values at 4.25mm are 0.76W/kg and 1.43W/kg respectively and the highest reported Body and Simultaneous SAR values at 3.25mm are 0.1.27W/kg and 1.43W/kg respectively.
Change 1- This change establishes portable category SAR conditions for the Dell P96G with WNC 025.901G1.0011 Main and Aux antennas at 3.25mm spacing to antenna edge and HongBo 260-27301 Main and Aux antennas at 3.25mm spacing to antenna edge.
Change 2- This change establishes portable category SAR conditions for the Dell P96G with WNC 025.901G2.0011 Main and Aux antennas at 4.25mm spacing to antenna edge and HongBo 260-27302 Main and Aux antennas at 4.25mm spacing to antenna edge.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values at 4.25mm are 0.09W/kg and 1.43W/kg respectively and the highest reported Body and Simultaneous SAR values at 3.25mm are 0.08W/kg and 1.43W/kg respectively.
Change 1- This change establishes portable category SAR conditions for the Dell P96G with WNC 025.901G1.0011 Main and Aux antennas at 3.25mm spacing to antenna edge and HongBo 260-27301 Main and Aux antennas at 3.25mm spacing to antenna edge.
Change 2- This change establishes portable category SAR conditions for the Dell P96G with WNC 025.901G2.0011 Main and Aux antennas at 4.25mm spacing to antenna edge and HongBo 260-27302 Main and Aux antennas at 4.25mm spacing to antenna edge.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values at 4.25mm are 0.58W/kg and 1.43W/kg respectively and the highest reported Body and Simultaneous SAR values at 3.25mm are 0.43W/kg and 1.43W/kg respectively.
Change 1- This change establishes portable category SAR conditions for the Dell P96G with WNC 025.901G1.0011 Main and Aux antennas at 3.25mm spacing to antenna edge and HongBo 260-27301 Main and Aux antennas at 3.25mm spacing to antenna edge.
Change 2- This change establishes portable category SAR conditions for the Dell P96G with WNC 025.901G2.0011 Main and Aux antennas at 4.25mm spacing to antenna edge and HongBo 260-27302 Main and Aux antennas at 4.25mm spacing to antenna edge.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-15IWL with Inpaq Main WA-P-LB-02-615 Main and WA-P-LB-03-120 Aux antennas and SouthStar NOZ-1229-R0A Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-15IWL with Inpaq Main WA-P-LB-02-615 Main and WA-P-LB-03-120 Aux antennas and SouthStar NOZ-1229-R0A Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-15IWL with Inpaq Main WA-P-LB-02-615 Main and WA-P-LB-03-120 Aux antennas and SouthStar NOZ-1229-R0A Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I24C-5 PC with Awan ANP6Y-100291 Main and ANP6Y-100290 Aux antennas and HongBo 260-27297 Main and 260-27296 Aux antennas and WNC 81EAA415.GF8 Main and 81EAA415.GF7 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I24C-5 PC with Awan ANP6Y-100291 Main and ANP6Y-100290 Aux antennas and HongBo 260-27297 Main and 260-27296 Aux antennas and WNC 81EAA415.GF8 Main and 81EAA415.GF7 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I24C-5 PC with Awan ANP6Y-100291 Main and ANP6Y-100290 Aux antennas and HongBo 260-27297 Main and 260-27296 Aux antennas and WNC 81EAA415.GF8 Main and 81EAA415.GF7 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I24C-4 PC with Awan ANP6Y-100289 Main and ANP6Y-100288 Aux antennas and HongBo 260-27293 Main and 260-27292 Aux antennas and WNC 81EAA415.GF6 Main and 81EAA415.GF5 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I25C-5 PC with Awan ANP6Y-100290 Main & ANP6Y-100291 Aux antennas and HongBo 260-27296 Main & 260-27297 Aux antennas and WNC 81EAA415.GF7 Main & 81EAA415.GF8 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I25C-5 PC with Awan ANP6Y-100290 Main & ANP6Y-100291 Aux antennas and HongBo 260-27296 Main & 260-27297 Aux antennas and WNC 81EAA415.GF7 Main & 81EAA415.GF8 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.08W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I24C-4 PC with Awan ANP6Y-100289 Main & ANP6Y-100288 Aux antennas and HongBo 260-27293 Main & 260-27292 Aux antennas and WNC 81EAA415.GF6 Main & 81EAA415.GF5 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.23W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I24C-4 PC with Awan ANP6Y-100289 Main & ANP6Y-100288 Aux antennas and HongBo 260-27293 Main & 260-27292 Aux antennas and WNC 81EAA415.GF6 Main & 81EAA415.GF5 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I25C-5 PC with Awan ANP6Y-100290 Main & ANP6Y-100291 Aux antennas and HongBo 260-27296 Main & 260-27297 Aux antennas and WNC 81EAA415.GF7 Main & 81EAA415.GF8 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I23C PC with Awan ANP6Y-100287 Main and ANP6Y-100286 Aux antennas and HongBo 260-27289 Main and 260-27288 Aux antennas and WNC 81EAA415.GF4 Main and 81EAA415.GF3 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.03W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P110G PC with Speed F.0G.FH-6078-001-00 Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I23C PC with Awan ANP6Y-100287 Main and ANP6Y-100286 Aux antennas and HongBo 260-27289 Main and 260-27288 Aux antennas and WNC 81EAA415.GF4 Main and 81EAA415.GF3 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.40W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-I23C PC with Awan ANP6Y-100287 Main and ANP6Y-100286 Aux antennas and HongBo 260-27289 Main and 260-27288 Aux antennas and WNC 81EAA415.GF4 Main and 81EAA415.GF3 Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.45W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P110G PC with Speed F.0G.FH-6078-001-00 Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P110G PC with Speed F.0G.FH-6078-001-00 Main and Aux antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-14IWL PC with Yageo ANTA0LC13162WLAN3 and ANTA0LC13162WLAN3 and HiTek 0ACCN018020N and 0ACCN018020N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-14IWL PC with Yageo ANTA0LC13162WLAN3 and ANTA0LC13162WLAN3 and HiTek 0ACCN018020N and 0ACCN018020N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.20W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-14IWL PC with Yageo ANTA0LC13162WLAN3 and ANTA0LC13162WLAN3 and HiTek 0ACCN018020N and 0ACCN018020N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-14IWL PC with Yageo ANTA0LC13101WLAN1 and ANTA0LC13101WLAN2 and AWAN ANP6Y100298 and ANP6Y100299 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-14IWL PC with Yageo ANTA0LC13101WLAN1 and ANTA0LC13101WLAN2 and AWAN ANP6Y100298 and ANP6Y100299 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.37W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S540-14IWL PC with Yageo ANTA0LC13101WLAN1 and ANTA0LC13101WLAN2 and AWAN ANP6Y100298 and ANP6Y100299 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S340-15IWL PC with AWAN ANP6Y-100304 and ANP6Y-100305 and Yageo ANTA0LC13121WLAN1 and ANTA0LC13121WLAN2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S340-15IWL PC with AWAN ANP6Y-100304 and ANP6Y-100305 and Yageo ANTA0LC13121WLAN1 and ANTA0LC13121WLAN2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad S340-15IWL PC with AWAN ANP6Y-100304 and ANP6Y-100305 and Yageo ANTA0LC13121WLAN1 and ANTA0LC13121WLAN2 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-15IWL PC with Yageo ANTA0LC13171WLAN1 and ANTA0LC13171WLAN2 and HighTek 0ACCN018022N and 0ACCN018023N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.02W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-15IWL PC with Yageo ANTA0LC13171WLAN1 and ANTA0LC13171WLAN2 and HighTek 0ACCN018022N and 0ACCN018023N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.16W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo IdeaPad C340-15IWL PC with Yageo ANTA0LC13171WLAN1 and ANTA0LC13171WLAN2 and HighTek 0ACCN018022N and 0ACCN018023N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.35W/kg and 1.39/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q219, with antenna HighTek part no 0ACQD018013N (Tx1 and Tx2) and Inpaq part no WA-P-LBLB-02-071 (Tx1 and Tx2) and WNC part no 81EAA415.GHD (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q219, with antenna HighTek part no 0ACQD018013N (Tx1 and Tx2) and Inpaq part no WA-P-LBLB-02-071 (Tx1 and Tx2) and WNC part no 81EAA415.GHD (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.39W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q219, with antenna HighTek part no 0ACQD018013N (Tx1 and Tx2) and Inpaq part no WA-P-LBLB-02-071 (Tx1 and Tx2) and WNC part no 81EAA415.GHD (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.57W/kg and 1.27W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W144, with antenna WNC part no 81EAA415.GHE (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.43W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W145, with antenna Inpaq part no WA-P-LB-02-600 (Tx1) and WA-P-LB-02-601 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W145, with antenna Inpaq part no WA-P-LB-02-600 (Tx1) and WA-P-LB-02-601 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.27W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W144, with antenna WNC part no 81EAA415.GHE (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.27/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W144, with antenna WNC part no 81EAA415.GHE (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.46/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W145, with antenna Inpaq part no WA-P-LB-02-600 (Tx1) and WA-P-LB-02-601 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.33W/kg and 1.33W/kg respectively
This change establishes portable category SAR conditions for the Lenovo 300e Windows 2nd Gen with Inpaq WA-F-LB-02-066 and WA-F-LB-01-065 and South Star N12-4457-R0A and N12-4456-R0A antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo 300e Windows 2nd Gen with Inpaq WA-F-LB-02-066 and WA-F-LB-01-065 and South Star N12-4457-R0A and N12-4456-R0A antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.33W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo 300e Windows 2nd Gen with Inpaq WA-F-LB-02-066 and WA-F-LB-01-065 and South Star N12-4457-R0A and N12-4456-R0A antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 0.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P82F, with antenna Acon part no ANP6Y-200104 (Tx1 and Tx2) and HongBo part no 260-26209 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.22W/kg and 0.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P82F, with antenna Acon part no ANP6Y-200104 (Tx1 and Tx2) and HongBo part no 260-26209 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P82F, with antenna Acon part no ANP6Y-200104 (Tx1 and Tx2) and HongBo part no 260-26209 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 0.92W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S340-14IWL, with antenna Advanced Wireless and Antenna Inc. part no ANP6Y-100300 (Tx1) and ANP6Y100301 (Tx2) and HighTek part no 0ACCN018026N (Tx1) and 0ACCN018027N (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 0.92/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S340-14IWL, with antenna Advanced Wireless and Antenna Inc. part no ANP6Y-100300 (Tx1) and ANP6Y100301 (Tx2) and HighTek part no 0ACCN018026N (Tx1) and 0ACCN018027N (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.92W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - Lenovo IdeaPad S340-14IWL, with antenna Advanced Wireless and Antenna Inc. part no ANP6Y-100300 (Tx1) and ANP6Y100301 (Tx2) and HighTek part no 0ACCN018026N (Tx1) and 0ACCN018027N (Tx2).
Antenna is of the same type and lower gain from original approval. SAR
testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.35/W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P78F PC with WNC Main and Aux Part No. 025.901EN.0001 and Speed Part No. F.0G.FS-6065-003-00 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P78F PC with WNC Main and Aux Part No. 025.901EN.0001 and Speed Part No. F.0G.FS-6065-003-00 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.35W/kg respectively.
This change establishes portable category SAR conditions for the Dell model P78F PC with WNC Main and Aux Part No. 025.901EN.0001 and Speed Part No. F.0G.FS-6065-003-00 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the Dell Model P77F PC with WNC Main and Aux Part No. 025.901FU.0001 and Hong Bo Part No. 260-27239 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the Dell Model P77F PC with WNC Main and Aux Part No. 025.901FU.0001 and Hong Bo Part No. 260-27239 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.18/W/kg respectively.
This change establishes portable category SAR conditions for the Dell Model P77F PC with WNC Main and Aux Part No. 025.901FU.0001 and Hong Bo Part No. 260-27239 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.58/W/kg respectively.
This change establishes portable category SAR conditions for the This change establishes portable category SAR conditions for the Dell Model P92G PC with WNC Main and Aux Part No. 025.901EO.0011 and Hong Bo Part No. 260-27237 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the This change establishes portable category SAR conditions for the Dell Model P92G PC with WNC Main and Aux Part No. 025.901EO.0011 and Hong Bo Part No. 260-27237 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.58W/kg respectively.
This change establishes portable category SAR conditions for the This change establishes portable category SAR conditions for the Dell Model P92G PC with WNC Main and Aux Part No. 025.901EO.0011 and Hong Bo Part No. 260-27237 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-Q14C PC with Inpaq WA-P-LBLB-02-063 and WA-PLBLB- 02-064, HongBo 260-23754 & 260-23753, and WNC 81EAA415.GGJ and 81EAA415.GGM antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.55W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-Q14C PC with Inpaq WA-P-LBLB-02-063 and WA-PLBLB- 02-064, HongBo 260-23754 & 260-23753, and WNC 81EAA415.GGJ and 81EAA415.GGM antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.55/W/kg respectively.
This change establishes portable category SAR conditions for the HP model HSN-Q14C PC with Inpaq WA-P-LBLB-02-063 and WA-PLBLB- 02-064, HongBo 260-23754 and 260-23753, and WNC 81EAA415.GGJ and 81EAA415.GGM antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.85W/kg and 1.50/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q16C, with antenna HongBo part nos 260-23749 (Tx1 and Tx2) and 260-23750 (Tx1 and Tx2), Inpaq part nos WA-P-LBLB-02-065 (Tx1 and Tx2) and WA-P-LBLB-02-066 (Tx1 and Tx2) and WNC part nos 81EAA415.GGQ (Tx1 and Tx2) and 81EAA415.GGT (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q16C, with antenna HongBo part nos 260-23749 (Tx1 and Tx2) and 260-23750 (Tx1 and Tx2), Inpaq part nos WA-P-LBLB-02-065 (Tx1 and Tx2) and WA-P-LBLB-02-066 (Tx1 and Tx2) and WNC part nos 81EAA415.GGQ (Tx1 and Tx2) and 81EAA415.GGT (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.50W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q16C, with antenna HongBo part nos 260-23749 (Tx1 and Tx2) and 260-23750 (Tx1 and Tx2), Inpaq part nos WA-P-LBLB-02-065 (Tx1 and Tx2) and WA-P-LBLB-02-066 (Tx1 and Tx2) and WNC part nos 81EAA415.GGQ (Tx1 and Tx2) and 81EAA415.GGT (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.38W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.11W/kg and 1.38/W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo Ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.41W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q15C, with antenna HongBo part nos 260-23749 (Tx1 & Tx2) & 260-23750 (Tx1 & Tx2), Inpaq part nos WA-P-LBLB-02-065 (Tx1 & Tx2) & WA-P-LBLB-02-066 (Tx1 & Tx2) and WNC part nos 81EAA415.GGQ (Tx1 & Tx2) & 81EAA415.GGT (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.82W/kg and 1.41/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - HSN-Q15C, with antenna HongBo part nos 260-23749 (Tx1 & Tx2) & 260-23750 (Tx1 & Tx2), Inpaq part nos WA-P-LBLB-02-065 (Tx1 & Tx2) & WA-P-LBLB-02-066 (Tx1 & Tx2) and WNC part nos 81EAA415.GGQ (Tx1 & Tx2) & 81EAA415.GGT (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSN-Q15C, with antenna HongBo part nos 260-23749 (Tx1 & Tx2) & 260-23750 (Tx1 & Tx2), Inpaq part nos WA-P-LBLB-02-065 (Tx1 & Tx2) & WA-P-LBLB-02-066 (Tx1 & Tx2) and WNC part nos 81EAA415.GGQ (Tx1 & Tx2) & 81EAA415.GGT (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W125 PC with Inpaq WA-P-LB-02-410 and WA-P-LB-02-411 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.93W/kg and 1.59W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W125 PC with Inpaq WA-P-LB-02-410 and WA-P-LB-02-411 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.50W/kg and 1.59/W/kg respectively.
This change establishes portable category SAR conditions for the HP model TPN-W125 PC with Inpaq WA-P-LB-02-410 and WA-P-LB-02-411 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.41W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.41/W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.54/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P77F, with antenna HongBo part no 025.901CX.0011 (Tx1 and Tx2) and WNC part no 025.901CX.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P77F, with antenna HongBo part no 025.901CX.0011 (Tx1 and Tx2) and WNC part no 025.901CX.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P77F, with antenna HongBo part no 025.901CX.0011 (Tx1 and Tx2) and WNC part no 025.901CX.0001 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P91G, with antenna HongBo part no 260-27188 (Tx1 and Tx2) and WNC part no 81ELAQ15.G30 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P91G, with antenna HongBo part no 260-27188 (Tx1 and Tx2) and WNC part no 81ELAQ15.G30 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 1.55/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P91G, with antenna HongBo part no 260-27188 (Tx1 and Tx2) and WNC part no 81ELAQ15.G30 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.25W/kg and 1.58/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P76F, with antenna HongBo part no 260-27194 (Tx1 and Tx2) and WNC part no 81ELAQ15.G35 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P76F, with antenna HongBo part no 260-27194 (Tx1 and Tx2) and WNC part no 81ELAQ15.G35 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P76F, with antenna HongBo part no 260-27194 (Tx1 and Tx2) and WNC part no 81ELAQ15.G35 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.97W/kg and 1.59/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P36E, with antenna HongBo part no 260-27200 (Tx1 and Tx2) and WNC part no 81ELAQ15.G39 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P36E, with antenna HongBo part no 260-27200 (Tx1 and Tx2) and WNC part no 81ELAQ15.G39 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P36E, with antenna HongBo part no 260-27200 (Tx1 and Tx2) and WNC part no 81ELAQ15.G39 (Tx1 and Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.07/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P93G, with antenna HongBo part no 260-27186 (Tx1 & Tx2) and WNC part no 025.901D2.0001 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.07W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P93G, with antenna HongBo part no 260-27186 (Tx1 & Tx2) and WNC part no 025.901D2.0001 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.07W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Dell model number - P93G, with antenna HongBo part no 260-27186 (Tx1 & Tx2) and WNC part no 025.901D2.0001 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 0.92/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W136, with antenna Inpaq part no WA-P-LBLB-02-069 Tx1 and Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 0.92W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W136, with antenna Inpaq part no WA-P-LBLB-02-069 Tx1 and Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.92W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W136, with antenna Inpaq part no WA-P-LBLB-02-069 Tx1 and Tx2.
Antenna is of the same type and lower gain from original approval.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W134, with antenna WNC part no 81EAA415.GDT Tx1 and 81EAA415.GDU Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.58W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W134, with antenna WNC part no 81EAA415.GDT Tx1 and 81EAA415.GDU Tx2.
Antenna is of the same type and lower gain from original approval.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.58/W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number - TPN-W134, with antenna WNC part no 81EAA415.GDT Tx1 and 81EAA415.GDU Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.03W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Y530-15ICH with Luxshare - Main - DC33001J200 and Aux - DC33001J210 and Speed - Main - DC33001J100 and Aux - DC33001J110 antennas.
SAR Testing was preformed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.03/W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Y530-15ICH with Luxshare - Main - DC33001J200 and Aux - DC33001J210 and Speed - Main - DC33001J100 and Aux - DC33001J110 antennas.
SAR Testing was preformed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.03W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Y530-15ICH with Luxshare - Main - DC33001J200 and Aux - DC33001J210 and Speed - Main - DC33001J100 and Aux - DC33001J110 antennas.
SAR Testing was preformed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.22W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.64W/kg and 1.22/W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.22W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB
616217 D04 for Laptop and Tablets v01.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Flex 6-11IGM PC.
With Antennas Inpaq 64451203800070 and 64451203800050 and South Star 64451203800020
and 64451203800010.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.79W/kg and 1.48W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Flex 6-11IGM PC. With Antennas Inpaq 64451203800070 and 64451203800050 and South Star 64451203800020 and 64451203800010.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.48/W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model Flex 6-11IGM PC. With Antennas Inpaq 64451203800070 and 64451203800050 and South Star 64451203800020 and 64451203800010.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.17W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg,1g for mixed mobile/portable conditions according to FCC KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.17W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg,1g for mixed mobile/portable conditions according to FCC KDB 447498 D01 General RF Exposure
Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.17W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value less than 0.8W/kg,1g for mixed mobile/portable conditions according to FCC KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type as original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.99W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00098A, with antennas ATC part no ATC1010-BL001B72RA Tx1 and ATC1010-
BL001B73RA Tx2 and South Star part no N12-4149-R0A Tx1 and N12-4150-R0A Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.21W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00098A, with antennas ATC part no ATC1010-BL001B72RA Tx1 and ATC1010- BL001B73RA Tx2 and South Star part no N12-4149-R0A Tx1 and N12-4150-R0A Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00098A, with antennas ATC part no ATC1010-BL001B72RA Tx1 and ATC1010- BL001B73RA Tx2 and South Star part no N12-4149-R0A Tx1 and N12-4150-R0A Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition an new antenna, antenna type is different with the original application. (Antenna type: Dipole antenna). |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition an new antenna, antenna type is different with the original application. (Antenna type: Dipole antenna). |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition an new antenna, antenna type is different with the original application. (Antenna type: Dipole antenna). |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.64W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00066F, with antennas High-Tek part no 025.9015N.0011 Tx1 and 025.9015O.0011 Tx2 and WNC part no 025.9015N.0001 Tx1 and 025.9015O.0001 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00066F, with antennas High-Tek part no 025.9015N.0011 Tx1 and 025.9015O.0011 Tx2 and WNC part no 025.9015N.0001 Tx1 and 025.9015O.0001 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.87W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number - TP00066F, with antennas High-Tek part no 025.9015N.0011 Tx1 and 025.9015O.0011 Tx2 and WNC part no 025.9015N.0001 Tx1 and 025.9015O.0001 Tx2.
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
various
|
RF Exposure Lab, LLC
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Intel Mobile Commmunications France S.A.S.
|
various
|
Name |
N******** A******
|
various
|
T******** M******
|
various
|
E******** L********
|
various
|
N**** A****
|
various
|
Telephone Number |
00334********
|
various
|
00334********
|
various
|
760 4********
|
various
|
+886-********
|
various
|
00334********
|
various
|
Fax Number |
00334********
|
various
|
+886-********
|
various
|
E-mail |
n******@intel.com
|
various
|
t******@rfexposurelab.com
|
various
|
e******@tw.bureauveritas.com
|
|