FCC ID: PD918265NG Intel Tri-Band Wireless-AC 18265

by: Intel Corporation latest update: 2018-09-07 model: 18265NG

Twenty Five grants have been issued under this FCC ID from 11/16/2016 to 09/07/2018 (this is one of three hundred and seventeen releases in 2018 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked instructions, drivers, password defaults, warrantee terms, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual Users Manual pdf 585.91 KiB July 09 2018 / June 03 2019
various User Manual Regulatory Guide Users Manual pdf 1.78 MiB
various Cover Letter(s) pdf July 09 2018
various ID Label/Location Info pdf July 09 2018
various Attestation Statements pdf July 09 2018
various Cover Letter(s) pdf July 09 2018
various RF Exposure Info pdf July 09 2018
various Cover Letter(s) pdf July 09 2018
various Test Setup Photos pdf July 09 2018 / June 03 2019
various RF Exposure Info pdf July 09 2018
various RF Exposure Info pdf July 09 2018
various Cover Letter(s) pdf / July 09 2018
various RF Exposure Info pdf / July 09 2018
various RF Exposure Info pdf / July 09 2018
various RF Exposure Info pdf / July 09 2018
various RF Exposure Info pdf / July 09 2018
various Test Setup Photos pdf / June 03 2019
various RF Exposure Info pdf / July 09 2018
various Simulations and Measurements Compairsons rev01 RF Exposure Info pdf 1.52 MiB / July 09 2018
various Test Setup Photos pdf / June 03 2019
various RF Exposure Info pdf July 09 2018
various RF Exposure Info pdf November 05 2018
various RF Exposure Info pdf November 05 2018
various RF Exposure Info pdf November 05 2018
various RF Exposure Info pdf November 05 2018
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various RF Exposure Info pdf
various Attestation Statements pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Cover Letter(s) pdf May 07 2017
various Cover Letter(s) pdf May 07 2017
various External Photos External Photos pdf 293.76 KiB May 07 2017
various Internal Photos Internal Photos pdf 384.42 KiB May 07 2017
various RF Exposure Info pdf May 07 2017
various Test Report pdf May 07 2017
various Label and Location ID Label/Location Info pdf 459.49 KiB May 07 2017
various Test Report pdf May 07 2017
various Test Report pdf May 07 2017
various Test Report pdf May 07 2017
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various User Manual Users Manual pdf 585.91 KiB July 09 2018 / June 03 2019
various User Manual Regulatory Guide Users Manual pdf 1.78 MiB
various Simulations and Measurements Compairsons rev01 RF Exposure Info pdf 1.52 MiB / July 09 2018
various External Photos External Photos pdf 293.76 KiB May 07 2017
various Internal Photos Internal Photos pdf 384.42 KiB May 07 2017
various Label and Location ID Label/Location Info pdf 459.49 KiB May 07 2017

frequency equipment class purpose
1 2018-09-07 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2422 ~ 2462 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 58320 ~ 62640 DXT - Part 15 Low Power Transceiver, Rx Verified
5 2018-05-14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 58320 ~ 62640 DXT - Part 15 Low Power Transceiver, Rx Verified
7 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2422 ~ 2462 DTS - Digital Transmission System
9 2018-03-13 58320 ~ 62640 DXT - Part 15 Low Power Transceiver, Rx Verified
10 2017-10-20 58320 ~ 62640 DXT - Part 15 Low Power Transceiver, Rx Verified Class II permissive change or modification of presently authorized equipment
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 2422 ~ 2462 DTS - Digital Transmission System
13 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2017-09-20 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
15 58320 ~ 62640 DXT - Part 15 Low Power Transceiver, Rx Verified
16 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 2017-07-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 2422 ~ 2462 DTS - Digital Transmission System
20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
21 2016-11-16 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Original Equipment
22 2422 ~ 2462 DTS - Digital Transmission System
23 58320 ~ 62640 DXT - Part 15 Low Power Transceiver, Rx Verified
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2018-09-07
various 2018-05-14
various 2018-03-13
various 2017-10-20
various 2017-09-20
various 2017-07-05
various 2016-11-16
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0008035131
various Physical Address 100 Center Point Circle Suite 200
various 100 Center Point Circle
various Columbia, SC
various Columbia, South Carolina 29210
various United States
app s TCB Information
various TCB Application Email Address h******@ACBcert.com
various h******@acbcert.com
various H******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code 18265NG
app s Person at the applicant's address to receive grant or for contact
various Name S**** C**** H********
various Title Product Regulations Engineer
various Telephone Number 803-3********
various Fax Number 803-2********
various E-mail s******@intel.com
app s Technical Contact
various Firm Name Intel Mobile Communications
various Dekra Testing and Certification
various Name S****** H********
various V****** W****
various Physical Address 100 Center Point Circle Suite 200
various No. 5-22, Ruishukeng, Linkou District
various Columbia, South Carolina 29210
various Columbia, 29210
various Columbia, Virginia 29210
various New Taipei City, 24451
various United States
various Taiwan
various Telephone Number +1803********
various 80321********
various 88622******** Extension:
various Fax Number 80321********
various 88622********
various 80321********
various E-mail s******@Intel.com
various V******@dekra.com
various S******@Intel.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)03/06/2019
various11/06/2018
various09/09/2018
various04/18/2018
various03/18/2018
various01/01/2018
various05/15/2017
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousDXT - Part 15 Low Power Transceiver, Rx Verified
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Tri-Band Wireless-AC 18265
variousIntel Tri Band Wireless-AC 18265
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host 12 inch tablet PC, Dell model number - P29S, with antenna WNC part no 81EAA515.G74 Tx1) and 81EAA515.G72 (Tx2) and Intel Gigabit antenna part no 10101RRFW (RFEM 3). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host 12 inch tablet PC, Dell model number - P29S, with antenna WNC part no 81EAA515.G74 Tx1) and 81EAA515.G72 (Tx2) and Intel Gigabit antenna part no 10101RRFW (RFEM 3). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host 12 inch tablet PC, Dell model number - P29S, with antenna WNC part no 81EAA515.G74 Tx1) and 81EAA515.G72 (Tx2) and Intel Gigabit antenna part no 10101RRFW (RFEM 3). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower listed is conducted. Highest EIRP with 12.3dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This change establishes portable category RF exposure compliance conditions for the host PC Dell Model P29S. Antenna - Gigabit antenna model 10101RRFW - RFEM 3.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host tablet PC, Dell model number P29S, with antenna WNC part no 81EAA515.G74 Tx1 and 81EAA515.G72 Tx2. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This change establishes portable category RF exposure compliance conditions for the host PC Dell Model P29S. Antenna - Gigabit antenna model 10101RRFW - RFEM 3.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host tablet PC, Dell model number P29S, with antenna WNC part no 81EAA515.G74 Tx1 and 81EAA515.G72 Tx2. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.54W/kg respectively. This change is to request approval for portable category specific host tablet PC, Dell model number P29S, with antenna WNC part no 81EAA515.G74 Tx1 and 81EAA515.G72 Tx2. Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This change establishes portable category RF exposure compliance conditions for the host PC Dell Model P73G, aluminum and carbon fiber chassis. Antenna - Gigabit antenna model 10101RRFW - RFEM 3.
variousPower listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T17G, Antennas: Ethertronics Main(5002680) & Aux (5002680). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T17G, Antennas: Ethertronics Main(5002680) & Aux (5002680). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.51W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T17G, Antennas: Ethertronics Main(5002680) & Aux (5002680). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T02J, Antennas: Auden Main(A30714-30) & Aux (A30713-30). HongBo Main (260-24154) & Aux (260-24155). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.29W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T02J, Antennas: Auden Main(A30714-30) & Aux (A30713-30). HongBo Main (260-24154) & Aux (260-24155). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.51W/kg respectively. This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T02J, Antennas: Auden Main(A30714-30) & Aux (A30713-30). HongBo Main (260-24154) & Aux (260-24155). Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of a new antenna type, slot antenna antenna, which is different than the original application.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of a new antenna type, slot antenna antenna, which is different than the original application.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of a new antenna type, slot antenna antenna, which is different than the original application.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.32W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.32W/kg respectively.
variousPower listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.32W/kg respectively.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various Intel Mobile Commmunications France S.A.S.
various Name N****** A******
various N**** A********
various Telephone Number 00334********
various 00334********
various Fax Number 00334********
various E-mail n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.153
1 2 15E 38 CC MO 5190 5230 0.15
1 3 15E 38 CC MO 5210 5210 0.04
1 4 15E 38 CC MO ND 5260 5320 0.145
1 5 15E 38 CC MO ND 5270 5310 0.143
1 6 15E 38 CC MO ND 5290 5290 0.024
1 7 15E 38 CC MO ND 5500 5700 0.131
1 8 15E 38 CC MO ND 5510 5670 0.244
1 9 15E 38 CC MO ND 5710 5710 0.198
1 1 15E 38 CC MO ND 5720 5720 0.13
1 11 15E 38 CC MO ND 5530 5690 0.206
1 12 15E 38 CC MO 5745 5825 0.244
1 13 15E 38 CC MO 5755 5795 0.24
1 14 15E 38 CC MO 5775 5775 0.096
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.007
2 2 15C CC MO 2412 2472 0.905
2 3 15C CC MO 2422 2462 0.804
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0170000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 58320.00000000 62640.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0170000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 58320.00000000 62640.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E 38 CC MO 5180 5240 0.153
7 2 15E 38 CC MO 5190 5230 0.15
7 3 15E 38 CC MO 5210 5210 0.04
7 4 15E 38 CC MO ND 5260 5320 0.145
7 5 15E 38 CC MO ND 5270 5310 0.143
7 6 15E 38 CC MO ND 5290 5290 0.024
7 7 15E 38 CC MO ND 5500 5700 0.131
7 8 15E 38 CC MO ND 5510 5670 0.244
7 9 15E 38 CC MO ND 5710 5710 0.198
7 1 15E 38 CC MO ND 5720 5720 0.13
7 11 15E 38 CC MO ND 5530 5690 0.206
7 12 15E 38 CC MO 5745 5825 0.244
7 13 15E 38 CC MO 5755 5795 0.24
7 14 15E 38 CC MO 5775 5775 0.096
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.007
8 2 15C CC MO 2412 2472 0.905
8 3 15C CC MO 2422 2462 0.804
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 58320.00000000 62640.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 58320.00000000 62640.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0170000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.007
12 2 15C CC MO 2412 2472 0.905
12 3 15C CC MO 2422 2462 0.804
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC MO 5180 5240 0.153
13 2 15E 38 CC MO 5190 5230 0.15
13 3 15E 38 CC MO 5210 5210 0.04
13 4 15E 38 CC MO ND 5260 5320 0.145
13 5 15E 38 CC MO ND 5270 5310 0.143
13 6 15E 38 CC MO ND 5290 5290 0.024
13 7 15E 38 CC MO ND 5500 5700 0.131
13 8 15E 38 CC MO ND 5510 5670 0.244
13 9 15E 38 CC MO ND 5710 5710 0.198
13 1 15E 38 CC MO ND 5720 5720 0.13
13 11 15E 38 CC MO ND 5530 5690 0.206
13 12 15E 49 CC MO 5745 5825 0.244
13 13 15E 49 CC MO 5755 5795 0.24
13 14 15E 49 CC MO 5775 5775 0.096
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.007
14 2 15C CC MO 2412 2472 0.905
14 3 15C CC MO 2422 2462 0.804
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 58320.00000000 62640.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E 38 CC MO 5180 5240 0.153
16 2 15E 38 CC MO 5190 5230 0.15
16 3 15E 38 CC MO 5210 5210 0.04
16 4 15E 38 CC MO ND 5260 5320 0.145
16 5 15E 38 CC MO ND 5270 5310 0.143
16 6 15E 38 CC MO ND 5290 5290 0.024
16 7 15E 38 CC MO ND 5500 5700 0.131
16 8 15E 38 CC MO ND 5510 5670 0.244
16 9 15E 38 CC MO ND 5710 5710 0.198
16 1 15E 38 CC MO ND 5720 5720 0.13
16 11 15E 38 CC MO ND 5530 5690 0.206
16 12 15E 38 CC MO 5745 5825 0.244
16 13 15E 38 CC MO 5755 5795 0.24
16 14 15E 38 CC MO 5775 5775 0.096
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0170000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0170000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.007
19 2 15C CC MO 2412 2472 0.905
19 3 15C CC MO 2422 2462 0.804
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E 38 CC MO 5180 5240 0.153
20 2 15E 38 CC MO 5190 5230 0.15
20 3 15E 38 CC MO 5210 5210 0.04
20 4 15E 38 CC MO ND 5260 5320 0.145
20 5 15E 38 CC MO ND 5270 5310 0.143
20 6 15E 38 CC MO ND 5290 5290 0.024
20 7 15E 38 CC MO ND 5500 5700 0.131
20 8 15E 38 CC MO ND 5510 5670 0.244
20 9 15E 38 CC MO ND 5710 5710 0.198
20 1 15E 38 CC MO ND 5720 5720 0.13
20 11 15E 38 CC MO ND 5530 5690 0.206
20 12 15E 38 CC MO 5745 5825 0.244
20 13 15E 38 CC MO 5755 5795 0.24
20 14 15E 38 CC MO 5775 5775 0.096
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E 38 CC MO 5180 5240 0.153
21 2 15E 38 CC MO 5190 5230 0.15
21 3 15E 38 CC MO 5210 5210 0.04
21 4 15E 38 CC MO ND 5260 5320 0.145
21 5 15E 38 CC MO ND 5270 5310 0.143
21 6 15E 38 CC MO ND 5290 5290 0.024
21 7 15E 38 CC MO ND 5500 5700 0.131
21 8 15E 38 CC MO ND 5510 5670 0.244
21 9 15E 38 CC MO ND 5710 5710 0.198
21 1 15E 38 CC MO ND 5720 5720 0.13
21 11 15E 38 CC MO ND 5530 5690 0.206
21 12 15E 49 CC MO 5745 5825 0.244
21 13 15E 49 CC MO 5755 5795 0.24
21 14 15E 49 CC MO 5775 5775 0.096
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.007
22 2 15C CC MO 2412 2472 0.905
22 3 15C CC MO 2422 2462 0.804
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 58320.00000000 62640.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0170000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC