FCC ID: PD9AX201D2L Intel Wi-Fi 6 AX201

by: Intel Corporation latest update: 2023-10-18 model: AX201D2L

Seventeen grants have been issued under this FCC ID from 12/19/2018 to 10/18/2023 (this is one of four hundred and eleven releases in 2023 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, drivers, troubleshooting guides, warrantee terms, & instructions.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
various Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 Users Manual pdf 2.61 MiB August 17 2022 / August 24 2022
various TempConfidential 11 EN Intel WiFi Adapter Information Guide Draft Rev05 Users Manual pdf 3.40 MiB September 07 2023 / April 15 2024 delayed release
various User Manual Users Manual pdf 2.70 MiB December 09 2022
various Internal Photos pdf September 07 2023 / October 18 2023
various Internal Photos Antennas Internal Photos pdf 87.68 KiB August 17 2022 / August 24 2022
various External Photos External Photos pdf 757.71 KiB September 25 2020
various Labels and Locations ID Label/Location Info pdf 262.81 KiB September 25 2020
various 220915-10.TR03-FCC MPE WLAN UNII4 AX201D2WL Rev01 RF Exposure Info pdf 375.09 KiB September 07 2023 / October 18 2023
various 220915-10.TR06-FCC RSE WLAN UNII4 AX201D2WL Rev01 Test Report pdf 472.11 KiB September 07 2023 / October 18 2023
various 220915-10.TR06-FCC RSE WLAN UNII4 AX201D2WL Rev01 Photographs Test Setup Photos pdf 581.28 KiB September 07 2023 / October 18 2023
various Attestation Statements pdf September 07 2023 / October 18 2023
various Attestation Statements pdf September 07 2023 / October 18 2023
various Test Report pdf September 19 2023 / October 18 2023
various Test Report pdf October 02 2023 / October 18 2023
various Test Report pdf October 12 2023 / October 18 2023
various Test Report pdf September 07 2023 / October 18 2023
various FCC Confidentiality Letter Cover Letter(s) pdf 268.79 KiB September 07 2023 / October 18 2023
various FCC Modular Approval Letter Cover Letter(s) pdf 1.04 MiB September 07 2023 / October 18 2023
various FCC Premissive Change Letter Cover Letter(s) pdf 1.01 MiB September 07 2023 / October 18 2023
various Modular Letter Cover Letter(s) pdf 419.50 KiB December 09 2022
various Premissive Change letter Cover Letter(s) pdf 292.05 KiB December 09 2022
various RF Exposure SAR RF Exposure Info pdf 5.42 MiB December 09 2022
various Test Report Antenna Data Test Report pdf 362.18 KiB December 09 2022
various Test Report Antenna StarCross Test Report pdf 718.04 KiB December 09 2022
various Test Setup Photos SAR Test Setup Photos pdf 714.59 KiB December 09 2022
various RF Exposure SAR Calibrations RF Exposure Info pdf 5.42 MiB December 09 2022
various 210209-01.TR38 - FCC, UNII4 RF, AX201D2WL Rev02 - Photographs Test Setup Photos pdf 988.39 KiB August 17 2022 / August 24 2022
various 210209-01.TR38 - FCC, UNII4 RF, AX201D2WL Rev02 Part1 Test Report pdf 4.71 MiB August 17 2022 / August 24 2022
various 210209-01.TR38 - FCC, UNII4 RF, AX201D2WL Rev02 Part2 Test Report pdf 4.32 MiB August 17 2022 / August 24 2022
various 210209-01.TR39 FCC UNII-4 SAR AX201D2WL Rev02 RF Exposure Info pdf 1.04 MiB August 17 2022 / August 24 2022
various 210209-01.TR39 FCC UNII-4 SAR AX201D2WL Rev02 Annex E RF Exposure Info pdf 1.63 MiB August 17 2022 / August 24 2022
various 210209-01.TR39 FCC UNII-4 SAR AX201D2WL Rev02 Annex F Test Setup Photos pdf 608.83 KiB August 17 2022 / August 24 2022
various FCC - C2PC letter AX201D2WL Cover Letter(s) pdf 743.19 KiB August 17 2022 / August 24 2022
various Passive-Scan-Attestation-AX201D2WL R2 Attestation Statements pdf 224.23 KiB August 17 2022 / August 24 2022
various Software-Security-Letter AX201D2WL Attestation Statements pdf 1016.51 KiB August 17 2022 / August 24 2022
various Authorization Letter Cover Letter(s) pdf 64.05 KiB September 25 2020
various Confidentiality Letter Cover Letter(s) pdf 94.97 KiB September 25 2020
various Description 15.407 Operational Description pdf September 25 2020 confidential
various Modular Approval Letter Cover Letter(s) pdf 1.35 MiB September 25 2020
various Passive Scan Atestation Attestation Statements pdf 195.25 KiB September 25 2020
various Permissive Change Letter Cover Letter(s) pdf 42.70 KiB September 25 2020
various RF Exposure MPE Report RF Exposure Info pdf 187.89 KiB September 25 2020
various Software Security Letter Cover Letter(s) pdf 404.76 KiB September 25 2020
various Test Report 15.407 Part 1 Test Report pdf 5.42 MiB September 25 2020
various Test Report 15.407 Part 2 Test Report pdf 5.49 MiB September 25 2020
various Test Report 15.407 Part 3 Test Report pdf 1.57 MiB September 25 2020
various Test Setup Photos Test Setup Photos pdf 451.57 KiB September 25 2020
various Description Bluetooth Operational Description pdf September 25 2020 confidential
various Test Rreport Bluetooth Test Report pdf 534.81 KiB September 25 2020
various Description BLE Operational Description pdf September 25 2020 confidential
various Description WLAN Operational Description pdf September 25 2020 confidential
various Test Report BLE Test Report pdf 308.59 KiB September 25 2020
various Test Report WLAN Test Report pdf 1.89 MiB September 25 2020
various Cover Letter(s) pdf June 18 2019
various Description Antenna Sky Cross Operational Description pdf June 18 2019 confidential
various ID Label/Location Info pdf June 18 2019
various RF Exposure Info pdf June 18 2019
various Attestation Statements pdf June 18 2019
various Block Diagram Block Diagram pdf December 18 2018 confidential
various Description Hardware Operational Description pdf December 18 2018 confidential
various ID Label/Location Info pdf March 01 2019
various Schematics Schematics pdf December 18 2018 confidential
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Intel WiFi Adapter Information Guide 5.25 Draft 081122 Rev02 Users Manual pdf 2.61 MiB August 17 2022 / August 24 2022
various TempConfidential 11 EN Intel WiFi Adapter Information Guide Draft Rev05 Users Manual pdf 3.40 MiB September 07 2023 / April 15 2024 delayed release
various User Manual Users Manual pdf 2.70 MiB December 09 2022
various Internal Photos pdf September 07 2023 / October 18 2023
various Internal Photos Antennas Internal Photos pdf 87.68 KiB August 17 2022 / August 24 2022
various External Photos External Photos pdf 757.71 KiB September 25 2020
various Labels and Locations ID Label/Location Info pdf 262.81 KiB September 25 2020
various 220915-10.TR03-FCC MPE WLAN UNII4 AX201D2WL Rev01 RF Exposure Info pdf 375.09 KiB September 07 2023 / October 18 2023
various 220915-10.TR06-FCC RSE WLAN UNII4 AX201D2WL Rev01 Test Report pdf 472.11 KiB September 07 2023 / October 18 2023
various 220915-10.TR06-FCC RSE WLAN UNII4 AX201D2WL Rev01 Photographs Test Setup Photos pdf 581.28 KiB September 07 2023 / October 18 2023
various Attestation Statements pdf September 07 2023 / October 18 2023
various Attestation Statements pdf September 07 2023 / October 18 2023
various Test Report pdf October 12 2023 / October 18 2023
various FCC Confidentiality Letter Cover Letter(s) pdf 268.79 KiB September 07 2023 / October 18 2023
various FCC Modular Approval Letter Cover Letter(s) pdf 1.04 MiB September 07 2023 / October 18 2023
various FCC Premissive Change Letter Cover Letter(s) pdf 1.01 MiB September 07 2023 / October 18 2023
various Modular Letter Cover Letter(s) pdf 419.50 KiB December 09 2022
various Premissive Change letter Cover Letter(s) pdf 292.05 KiB December 09 2022
various RF Exposure SAR RF Exposure Info pdf 5.42 MiB December 09 2022
various Test Report Antenna Data Test Report pdf 362.18 KiB December 09 2022
various Test Report Antenna StarCross Test Report pdf 718.04 KiB December 09 2022
various Test Setup Photos SAR Test Setup Photos pdf 714.59 KiB December 09 2022
various RF Exposure SAR Calibrations RF Exposure Info pdf 5.42 MiB December 09 2022
various 210209-01.TR38 - FCC, UNII4 RF, AX201D2WL Rev02 - Photographs Test Setup Photos pdf 988.39 KiB August 17 2022 / August 24 2022
various 210209-01.TR38 - FCC, UNII4 RF, AX201D2WL Rev02 Part1 Test Report pdf 4.71 MiB August 17 2022 / August 24 2022
various 210209-01.TR38 - FCC, UNII4 RF, AX201D2WL Rev02 Part2 Test Report pdf 4.32 MiB August 17 2022 / August 24 2022
various 210209-01.TR39 FCC UNII-4 SAR AX201D2WL Rev02 RF Exposure Info pdf 1.04 MiB August 17 2022 / August 24 2022
various 210209-01.TR39 FCC UNII-4 SAR AX201D2WL Rev02 Annex E RF Exposure Info pdf 1.63 MiB August 17 2022 / August 24 2022
various 210209-01.TR39 FCC UNII-4 SAR AX201D2WL Rev02 Annex F Test Setup Photos pdf 608.83 KiB August 17 2022 / August 24 2022
various FCC - C2PC letter AX201D2WL Cover Letter(s) pdf 743.19 KiB August 17 2022 / August 24 2022
various Passive-Scan-Attestation-AX201D2WL R2 Attestation Statements pdf 224.23 KiB August 17 2022 / August 24 2022
various Software-Security-Letter AX201D2WL Attestation Statements pdf 1016.51 KiB August 17 2022 / August 24 2022
various Authorization Letter Cover Letter(s) pdf 64.05 KiB September 25 2020
various Confidentiality Letter Cover Letter(s) pdf 94.97 KiB September 25 2020
various Modular Approval Letter Cover Letter(s) pdf 1.35 MiB September 25 2020
various Passive Scan Atestation Attestation Statements pdf 195.25 KiB September 25 2020
various Permissive Change Letter Cover Letter(s) pdf 42.70 KiB September 25 2020
various RF Exposure MPE Report RF Exposure Info pdf 187.89 KiB September 25 2020
various Software Security Letter Cover Letter(s) pdf 404.76 KiB September 25 2020
various Test Report 15.407 Part 1 Test Report pdf 5.42 MiB September 25 2020
various Test Report 15.407 Part 2 Test Report pdf 5.49 MiB September 25 2020
various Test Report 15.407 Part 3 Test Report pdf 1.57 MiB September 25 2020
various Test Setup Photos Test Setup Photos pdf 451.57 KiB September 25 2020
various Test Rreport Bluetooth Test Report pdf 534.81 KiB September 25 2020
various Test Report BLE Test Report pdf 308.59 KiB September 25 2020
various Test Report WLAN Test Report pdf 1.89 MiB September 25 2020

frequency equipment class purpose
1 2023-10-18 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2022-12-09 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
3 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
4 2022-08-24 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
5 2020-09-25 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2422 ~ 2462 DTS - Digital Transmission System
8 2019-06-18 2412 ~ 2472 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
9 2422 ~ 2462 DTS - Digital Transmission System
10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
14 2018-12-19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Original Equipment
15 2422 ~ 2462 DTS - Digital Transmission System
16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2023-10-18
various 2022-12-09
various 2022-08-24
various 2020-09-25
various 2019-06-18
various 2018-12-19
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0033159344
various 0008035131
various Physical Address 425 rue de Goa Le Cargo B6
various 100 Center Point Circle Suite 200
various 425 rue de Goa
various 100 Center Point Circle
various Antibes, N/A
various Columbia, SC
various Columbia, South Carolina 29210
various France
various United States
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various h******@ACBcert.com
various h******@atcbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code AX201D2L
app s Person at the applicant's address to receive grant or for contact
various Name B******** L******
various S**** C**** H********
various Title Regulatory Engineer
various Product Regulations Engineer
various Telephone Number 04930********
various 803-3********
various Fax Number 04930********
various 803-2********
various E-mail b******@intel.com
various s******@intel.com
app s Technical Contact
various Firm Name Intel Corporation
various Intel Mobile Communications
various Dekra Testing
various Name B******** L****
various S******** C**** H******
various F****** Y******
various S******** H******
various Physical Address 425 rue de Goa
various 100 Center Point Circle
various No. 5-22, Ruishukeng, Linkou, Dist.
various No. 5-22, Ruishukeng, Linkou Dist.
various 100 Center Point Circle Suite 200
various Antibes, 06600
various Columbia, 29212
various New Taipei City, 24451
various Columbia, South Carolina 29210
various Columbia, Minnesota 29210
various Columbia, California 29210
various Columbia, Arizona 29210
various France
various United States
various Taiwan
various Telephone Number 04930********
various 80321********
various 88628******** Extension:
various +1803********
various E-mail b******@intel.com
various s******@intel.com
various f******@dekra.com
various s******@Intel.com
app s Non Technical Contact
various Firm Name Intel Corporation
various Name B****** L********
various G******** C****
various Physical Address 425 rue de Goa
various Antibes, 06600
various France
various Telephone Number 04930********
various +3349********
various E-mail b******@intel.com
various g******@intel.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)04/15/2024
various12/15/2019
various06/16/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wi-Fi 6 AX201
variousIntel Wireless AX201
variousIntel Wireless - AX201
variousIntel Wireless -AX201
variousIntel WiFi 6 AX201
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
variousNo
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations. Addition of a new antenna and antenna type for the UNII-4 Band. (Antenna type: Dipole Antenna Wieson Part no ARY121-0009-002-H0).
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.09W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This change to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 band. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76 W/kg and 1.38 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. Addition of Dipole Antenna, the antenna type is different from the original application.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.09W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 8mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.58W/kg and 1.19W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 5mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.38W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Name N**** A******
various M**** L******
various Telephone Number 00334********
various +886-******** Extension:
various 00334********
various Fax Number +886-********
various 00334********
various E-mail n******@intel.com
various m******@dekra.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.133
1 2 15E CC MO 5190 5230 0.137
1 3 15E CC MO 5210 5210 0.072
1 4 15E CC MO 5250 5250 0.041
1 5 15E CC MO ND 5260 5320 0.134
1 6 15E CC MO ND 5270 5310 0.112
1 7 15E CC MO ND 5290 5290 0.062
1 8 15E CC MO ND 5500 5700 0.136
1 9 15E CC MO ND 5510 5670 0.133
1 1 15E CC MO ND 5710 5710 0.14
1 11 15E CC MO ND 5720 5720 0.109
1 12 15E CC MO ND 5530 5690 0.147
1 13 15E CC MO 5745 5825 0.136
1 14 15E CC MO 5755 5795 0.13
1 15 15E CC MO 5775 5775 0.124
1 16 15E CC MO 5845 5885 0.242
1 17 15E CC MO 5835 5875 0.658
1 18 15E CC MO 5855 5855 0.49
1 19 15E CC MO 5815 5815 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.133
2 2 15E CC MO 5190 5230 0.137
2 3 15E CC MO 5210 5210 0.072
2 4 15E CC MO 5250 5250 0.041
2 5 15E CC MO ND 5260 5320 0.134
2 6 15E CC MO ND 5270 5310 0.112
2 7 15E CC MO ND 5290 5290 0.062
2 8 15E CC MO ND 5500 5700 0.136
2 9 15E CC MO ND 5510 5670 0.133
2 1 15E CC MO ND 5710 5710 0.14
2 11 15E CC MO ND 5720 5720 0.109
2 12 15E CC MO ND 5530 5690 0.147
2 13 15E CC MO 5745 5825 0.136
2 14 15E CC MO 5755 5795 0.13
2 15 15E CC MO 5775 5775 0.124
2 16 15E CC MO 5845 5885 0.242
2 17 15E CC MO 5835 5875 0.658
2 18 15E CC MO 5855 5855 0.49
2 19 15E CC MO 5815 5815 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.133
3 2 15E CC MO 5190 5230 0.137
3 3 15E CC MO 5210 5210 0.072
3 4 15E CC MO 5250 5250 0.041
3 5 15E CC MO ND 5260 5320 0.134
3 6 15E CC MO ND 5270 5310 0.112
3 7 15E CC MO ND 5290 5290 0.062
3 8 15E CC MO ND 5500 5700 0.136
3 9 15E CC MO ND 5510 5670 0.133
3 1 15E CC MO ND 5710 5710 0.14
3 11 15E CC MO ND 5720 5720 0.109
3 12 15E CC MO ND 5530 5690 0.147
3 13 15E CC MO 5745 5825 0.136
3 14 15E CC MO 5755 5795 0.13
3 15 15E CC MO 5775 5775 0.124
3 16 15E CC MO 5845 5885 0.242
3 17 15E CC MO 5835 5875 0.658
3 18 15E CC MO 5855 5855 0.49
3 19 15E CC MO 5815 5815 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.133
4 2 15E CC MO 5190 5230 0.137
4 3 15E CC MO 5210 5210 0.072
4 4 15E CC MO 5250 5250 0.041
4 5 15E CC MO ND 5260 5320 0.134
4 6 15E CC MO ND 5270 5310 0.112
4 7 15E CC MO ND 5290 5290 0.062
4 8 15E CC MO ND 5500 5700 0.136
4 9 15E CC MO ND 5510 5670 0.133
4 1 15E CC MO ND 5710 5710 0.14
4 11 15E CC MO ND 5720 5720 0.109
4 12 15E CC MO ND 5530 5690 0.147
4 13 15E CC MO 5745 5825 0.136
4 14 15E CC MO 5755 5795 0.13
4 15 15E CC MO 5775 5775 0.124
4 16 15E CC MO 5845 5885 0.242
4 17 15E CC MO 5835 5875 0.658
4 18 15E CC MO 5855 5855 0.49
4 19 15E CC MO 5815 5815 0.196
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.133
5 2 15E 38 CC MO 5190 5230 0.137
5 3 15E 38 CC MO 5210 5210 0.072
5 4 15E 38 CC MO 5250 5250 0.041
5 5 15E 38 CC MO ND 5260 5320 0.134
5 6 15E 38 CC MO ND 5270 5310 0.112
5 7 15E 38 CC MO ND 5290 5290 0.062
5 8 15E 38 CC MO ND 5510 5670 0.133
5 9 15E 38 CC MO ND 5710 5710 0.14
5 1 15E 38 CC MO ND 5720 5720 0.109
5 11 15E 38 CC MO ND 5530 5690 0.147
5 12 15E 38 CC MO ND 5500 5700 0.136
5 13 15E 38 CC MO 5745 5825 0.136
5 14 15E 38 CC MO 5755 5795 0.13
5 15 15E 38 CC MO 5775 5775 0.124
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.005
7 2 15C CC MO 2412 2472 0.973
7 3 15C CC MO 2422 2462 0.553
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.005
8 2 15C CC MO 2412 2472 0.973
8 3 15C CC MO 2422 2462 0.553
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.005
9 2 15C CC MO 2412 2472 0.973
9 3 15C CC MO 2422 2462 0.553
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 38 CC MO 5180 5230 0.133
11 2 15E 38 CC MO 5190 5230 0.129
11 3 15E 38 CC MO 5210 5210 0.072
11 4 15E 38 CC MO 5250 5250 0.036
11 5 15E 38 CC MO ND 5260 5320 0.135
11 6 15E 38 CC MO ND 5270 5310 0.109
11 7 15E 38 CC MO ND 5290 5290 0.062
11 8 15E 38 CC MO ND 5500 5700 0.137
11 9 15E 38 CC MO ND 5710 5710 0.132
11 1 15E 38 CC MO ND 5720 5720 0.103
11 11 15E 38 CC MO ND 5530 5690 0.149
11 12 15E 38 CC MO 5745 5825 0.134
11 13 15E 38 CC MO 5755 5795 0.132
11 14 15E 38 CC MO 5775 5775 0.13
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC MO 5180 5240 0.133
13 2 15E 38 CC MO 5190 5230 0.129
13 3 15E 38 CC MO 5210 5210 0.072
13 4 15E 38 CC MO 5250 5250 0.036
13 5 15E 38 CC MO ND 5260 5320 0.135
13 6 15E 38 CC MO ND 5270 5310 0.109
13 7 15E 38 CC MO ND 5290 5290 0.062
13 8 15E 38 CC MO ND 5500 5700 0.137
13 9 15E 38 CC MO ND 5710 5710 0.132
13 1 15E 38 CC MO ND 5720 5720 0.103
13 11 15E 38 CC MO ND 5530 5690 0.149
13 12 15E 38 CC MO 5745 5825 0.134
13 13 15E 38 CC MO 5755 5795 0.132
13 14 15E 38 CC MO 5775 5775 0.13
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.133
14 2 15E 38 CC MO 5190 5230 0.137
14 3 15E 38 CC MO 5210 5210 0.072
14 4 15E 38 CC MO 5250 5250 0.041
14 5 15E 38 CC MO ND 5260 5320 0.134
14 6 15E 38 CC MO ND 5270 5310 0.112
14 7 15E 38 CC MO ND 5290 5290 0.062
14 8 15E 38 CC MO ND 5500 5700 0.136
14 9 15E 38 CC MO ND 5510 5670 0.133
14 1 15E 38 CC MO ND 5710 5710 0.14
14 11 15E 38 CC MO ND 5720 5720 0.109
14 12 15E 38 CC MO ND 5530 5690 0.147
14 13 15E 38 CC MO 5745 5825 0.136
14 14 15E 38 CC MO 5755 5795 0.13
14 15 15E 38 CC MO 5775 5775 0.124
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.005
15 2 15C CC MO 2412 2472 0.973
15 3 15C CC MO 2422 2462 0.553
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC