submitted | available | document details (if available) | source link |
---|---|---|---|
Yoga 720 1315 IKB UG EN Lenovo Acrobat Distiller 11.0 (Windows) |
various | User Manual 3 | Users Manual | 2.40 MiB |
Chapter 1. Getting to know your computer Rear view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
a Ventilation slots Dissipate internal heat. Note: Make sure that the ventilation slots are not blocked or else the computer may overheat. 14 Chapter 2. Starting to use Windows 10 Note: Windows 10 has an updated version. If you are using the updated version, some operations may be different. Please refer to the actual product. Configuring the operating system for the first time - - - - - - - - - - - -
You may need to configure the operating system when it is first used. The configuration process may include the procedures below:
Accepting the end user license agreement Configuring the Internet connection Registering the operating system Creating a user account Operating system interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 comes with a powerful and useful start menu. To open the start menu, do one of the following:
Press the Windows key on the keyboard. Select Start on the lower-left corner of the desktop. a Get Started app b Settings button c Power button d All apps button e Start button f Search box g Task view button 15 Chapter 2. Starting to use Windows 10 Settings Settings lets you perform basic tasks. You can also search for more settings with the settings search box in the upper-right corner. To open the settings, do the following:
Open the start menu, and then select Settings
. Personalize the start menu You can personalize the start menu with your favorite apps. To personalize the start menu, do the following:
1 Open the start menu, and then select All apps 2 Right click the app you want to add to the start menu, and then select Pin to Start. to display the apps list. Note: You can also drag apps from the Most used or All apps columns to add them to the start menu. 16 Chapter 2. Starting to use Windows 10 Putting the computer to sleep or shutting it down - - - - - - - - - - - - - -
When you have finished working with your computer, you can put it to sleep or shut it down. Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following:
Close the display lid. Press the Power button. Open the start menu, and then select Power Sleep. Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode) before you move your computer. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data. To wake the computer, do one of the following:
Press any key on the keyboard. (Notebook mode only) Press the Power button. 17 Chapter 2. Starting to use Windows 10 Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down the computer, do one of the following:
Open the start menu, and then select Power Shut down. Press and hold or right-click the Start button in the lower-left corner and select Shut down or sign out Shut down. 18 Chapter 2. Starting to use Windows 10 Task and desktop management - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Task view To open the task view, do one of the following:
Select the Task view button Press the Windows key Swiping in from the left edge of the screen.
+ Tab. on the task bar. Virtual desktop management Windows 10 supports the ability to create, manage and switch between virtual desktops. To create a new virtual desktop, do one of the following:
Open the task view, and then select New desktop. Press the Windows key To switch between different desktops, do one of the following:
Open the task view and select the desktop you want active. Press the Windows key to scroll through the desktops youve created.
+ Ctrl + D.
+ Ctrl +
/
19 Chapter 2. Starting to use Windows 10 Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Enabling wireless connection To enable wireless functions, do the following:
1 Press F7 (
) to disable airplane mode. 2 Click on the lower-right corner of the task bar to open the network configuration page. Connecting to a wireless network After wireless has been enabled, the computer will automatically scan for available wireless networks and display them in the wireless network list. To connect to a wireless network, click the network name in the list, and then click Connect. Note: Some networks require a network security key or passphrase for connection. To connect to one of those networks, ask the network administrator or the Internet service provider (ISP) for the security key or passphrase. Get Started app - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 also provides the Get Started app to explain the new features of Windows 10. You can find it on the start menu. To open the Get Started app, do one of the following:
Open the start menu and select Get Started Press Fn + F1 (depending on your keyboard layout). 20 Chapter 2. Starting to use Windows 10 Touch screen operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The display panel can accept inputs like a tablet, using the multi-touch screen, or like a traditional notebook computer, using the keyboard and touchpad. Multi-touch gestures You can touch the screen with one or more fingertips to perform a variety of tasks. Frequently used gestures Tasks performed Tap Tap once on an item. Performs an action, such as starting an app, opening a link, or performing a command. Similar to left-clicking with a mouse. Press and hold Press your finger down and leave it there for a moment. Enables you to see detailed information before selecting an action. Can also open a menu with more options. Similar to right-
clicking with a mouse. 21 Chapter 2. Starting to use Windows 10
(continued) Frequently used gestures Tasks performed Zoom Move two fingers together or apart while touching the screen. Zooms in and out on visual apps, such as pictures and maps. Can also jump to the beginning or end of a list. Rotate Place two or more fingers on an item and then turn your hand. Rotates an object (Note: Not all items can be rotated, depending upon the app.). Slide Drag your finger across the screen. Pans or scrolls through lists and pages. Can also move an object or be used to draw or write, depending upon the app. Similar to pressing and holding to pan and to scrolling with a mouse. 22 Chapter 2. Starting to use Windows 10
(continued) Frequently used gestures Tasks performed Swipe Start from left/right edge of the screen, then swipe inwards toward the center. Swiping in from the left edge of the screen can open the task view. Swiping in from the right edge of the screen displays the action center. 23 Chapter 3. Lenovo OneKey Recovery System
(on select models) The Lenovo OneKey Recovery System is software designed to back up and restore your computer. You can use it to restore the system partition to its original status in case of a system failure. You can also create user backups for easy restoration as required. Notes:
If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery System is not available. To utilize the features of the OneKey Recovery System, your hard disk already includes a hidden partition by default to store the system image file and the OneKey Recovery System program files. This default partition is hidden for security reasons, which explains why the available disk space is less than the stated capacity. Backing up the system partition You can back up the system partition to an image file. This image file can be used to restore the system partition. To back up the system partition:
1 In Windows, press the Novo button or double-click OneKey Recovery icon to start the Lenovo OneKey Recovery System. 2 Click System Backup. 3 Select a back-up location and click Next to start the backup. Notes:
You can choose a back-up location on the local hard disk drive or an external storage device. Remove the removable hard disk drive before starting the Lenovo OneKey Recovery System. Otherwise, data from the removable hard disk drive might be lost. The back-up process may take a while. The back-up process is only available when Windows can be started normally. Restoring You can choose to restore the system partition to its original status or to a previously created back-up point. To restore the system partition:
1 In Windows, press the Novo button or double-click OneKey Recovery icon to start the Lenovo OneKey Recovery System. 2 Click System Recovery. The computer will restart to the recovery environment. 3 Follow the on-screen instructions to restore the system partition to its original status or to a previously created back-up point. Notes:
The recovery process is irreversible. Make sure to back up any data you wish to save on the system partition before starting the recovery process. The recovery process may take a while. So be sure to connect the AC power adapter to your computer during the recovery process. The above instructions should be followed when Windows can be started normally. If Windows cannot be started, then follow the steps below to start the Lenovo OneKey Recovery System:
1 Shut down the computer. 2 Press the Novo button. From Novo Button Menu, select System Recovery and press Enter. 24 Chapter 4. Troubleshooting Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This section lists frequently asked questions by category. Finding information What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your computer contains safety precautions for using your computer. Read and follow all the precautions when using your computer. Where can I find the hardware specifications for my computer?
You can find the hardware specification for your computer on the printed flyers which came with your computer. Where can I find warranty information?
For detailed warranty information on this machine, please visit below website to check out:
support.lenovo.com/warrantystatus. Drivers and preinstalled software Where are the installation discs for Lenovo preinstalled software (desktop software)?
Your computer did not come with installation discs for Lenovo preinstalled software. If you need to reinstall any preinstalled software, you can find the installation program on the D partition of your hard disk. If you cannot find the installation program there, you can also download it from the Lenovo consumer support website. Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo provides drivers for all the hardware devices that you need on the D partition of your hard disk. You can also download the latest device drivers from the Lenovo consumer support website. Lenovo OneKey Recovery System Where are the recovery discs?
Your computer did not come with any recovery discs. Use the Lenovo OneKey Recovery System if you need to restore the system to its original factory status. What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the following steps:
1 Close all open programs, and then restart the back-up process. 2 Check to see if the destination media is damaged. Select another path and then try again. When do I need to restore the system to its factory status?
Use this feature when the operating system fails to start up. If there is critical data on the system partition, back it up before starting recovery. 25 Chapter 4. Troubleshooting BIOS setup utility What is the BIOS setup utility?
The BIOS setup utility is a ROM-based software. It displays basic computer information and provides options for setting boot devices, security, hardware mode, and other preferences. How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer. 2 Press the Novo button and then select BIOS Setup. Getting help How can I contact the customer support center?
See Chapter 3. Getting help and service in the Lenovo Safety and General Information Guide. 26 Chapter 4. Troubleshooting Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Display problems When I turn on the computer, nothing appears on the screen. If the screen is blank, make sure that:
- The AC power adapter is connected to the computer, and plugged into a working electrical outlet.
- The computer power is on. Press the Power button again for confirmation. If these items are properly set, and the screen remains blank, have the computer serviced. When I turn on the computer, only a white cursor appears on a blank screen. The screen goes blank while the computer is on. Restore backed-up files to your Windows environment or the entire contents of your hard disk to its original factory contents using the Lenovo OneKey Recovery System. If you still see only the cursor on the screen, have the computer serviced. Your screen saver or power management may be enabled. Do one of the following to resume from sleep mode:
- Press any key on the keyboard. (Notebook mode only)
- Press the Power button. Sleep problems The critical low-battery error message appears, and the computer immediately turns off. The computer enters sleep mode immediately after Power-on self-test (POST). The battery power is getting low. Connect the AC power adapter to the computer. Make sure that:
- The battery pack is charged.
- The operating temperature is within the acceptable range. See Chapter 2. Use and care Information in the Lenovo Safety and General Information Guide. Note: If the battery pack is charged and the temperature is within range, have the computer serviced. The computer does not return from sleep mode, and the computer does not work. If your computer is in sleep mode, connect the AC power adapter to the computer, then press the Power button. If the system still does not return from sleep mode, stops responding, or cannot be turned off, reset the computer. Unsaved data may be lost. To reset the computer, press and hold the Power button for eight seconds or more. If the computer is still not reset, remove the AC power adapter. 27 Chapter 4. Troubleshooting Display panel problems The screen is blank. Do the following:
- If you are using the AC power adapter or the battery pack,
) to and the battery status indicator is on, press F12 (
make the screen brighter.
- If the power indicator is blinking, press the Power button to resume from sleep mode.
- If the problem persists, follow the solution in the next problem The screen is unreadable or distorted. The screen is unreadable or distorted. Make sure that:
- The screen resolution and color quality are correctly set.
- The monitor type is correct. Incorrect characters appear on the screen. Is the operating system or programs installed correctly? If they are installed and configured correctly, have the computer serviced. Sound problems No sound can be heard from the speakers even when the volume is turned up. Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device. Recharge the battery. Battery pack problems Your computer shuts down before the battery status indicator shows empty.
-or-
Your computer operates after the battery status indicator shows empty. 28 Other problems Your computer does not respond. The connected external device does not work. Chapter 4. Troubleshooting To turn off your computer, press and hold the Power button for eight seconds or more. If the computer still does not respond, remove the AC power adapter. Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network. Do not connect or disconnect any external device cables other than USB while the computer power is on. Otherwise, you might damage your computer. When using high power consumption external devices such as an external USB optical disk drive, use an external device power adapter. Otherwise, the device may not be recognized, or the system may shut down as a result. 29 Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo OneKey Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, products, or service names may be trademarks or service marks of others. 30 L e n o v o C h n a 2 0 1 6 i en-US Rev. AA00
This product uses the FCC Data API but is not endorsed or certified by the FCC