FCC ID: SPYMC432 Mobile Computer

General Safety Rules Please read this Guide carefully before you start using this device. Use only the MC432/MC432L components and accessories supplied by Back View the manufacturer. Do not attempt to disassemble the MC432/MC432L, as it does not contain parts that can be repaired by the user. Any tampering will void the warranty. Discard replaced battery packs properly according to local laws. At the end of this devices product life, dispose of properly according to local laws. Do not submerge the MC432 in any type of liquid. Charging Temperature0 to 45 Mobile Computer MC432/MC432L Quick Start Guide Package Contents MC432/MC432L Mobile Computer Battery Pack (with Rechargeable Battery) Quick Start Guide USB Charge/Communication Cable Quick Charge Compliant Power Adapter Features Front View After unpacking, please inspect package contents. If any item is damaged or missing, please contact your customer support representative immediately. Side View Laser Warning Label Speaker Camera Flash LED Hand Strap Attachments Battery Cover Lock Switch Battery Pins Micro SD Card Slot SIM Card Slot(For MC432L) Bottom View Charging Pin / USB C Connecter Charging Instructions The MC432/MC432L battery pack is not initially fully charged. After installing the battery pack, please charge it via the USB cable or the charging cradle. As default, the battery pack is disconnected at the factory to avoid damage caused by excessive draining. Replace the battery pack annually to ensure maximum performance. Avoid storing batteries for long periods of time in fully charged or very low battery level status. To maintain a moderate charge and maximize battery life, charge spare battery packs every two to three months. Installing the Battery Pack 1. Press and push the Battery Lock Switch to Open and remove the Battery 2. Align the Battery Pack and the device connectors and slide it into the Battery 3. Slide the Battery Cover into place. 4. Press and push the Battery Lock Switch to Lock to secure the battery. Cover. Slot. Top View Scan Window CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES PROPERLY ACCORDING TO LOCAL LAWS. Charging via USB Cable Use the provided USB charge/communication cable together with the Quick Charge compliant power adapter to charge the MC432MC432L from a power outlet. Charging via Charging Cradle Place the MC432/MC432L in the charging cradle. Attach the power adapter to the cradle, and then plug the power adapter into a power outlet. Charging Time Charging time required will vary depending on the actual application of the MC432/MC432L and the condition of the battery pack. This device is shipped with a lithium-ion battery that is not fully charged. Please charge this device fully before first time use. Use under environment temperatures of 0C~45C. Rated Voltage Output InputAC 100-240V, 50/60Hz, 0.5A

(1) DC 5V,3A/9V,2A

(2) DC 5V,2.5A/9V,2A(For USA) Micro SD / SIM(For MC432L) Card Installation 1. Turn off the MC432/MC432L. 2. Open the Battery Cover and remove the Battery Pack. 3. Locate the SIM or Micro SD Card Slot inside the Battery Slot. 4. Insert the SIM Card or Micro SD Card into the appropriate slot. 5. Gently press and slide the card up until it clicks into place. 6. Reinstall the Battery Pack and Battery Cover. Scanning a Barcode Label 1. Point the scan window at the barcode you wish to scan. 2. Tap Scan on the Scan app screen or press a scan button on the MC432/MC432L. 3. The imager projects a laser aiming pattern to position the barcode in the imagers field of view. Center the laser dot and cross-hair aiming pattern on the barcode. 4. Release the scan button to capture and decode the image. Battery Cover Battery Pack Battery Slot Speaker Scan LED Charging LED Touch Screen Scan Button Keypad Mic Volume Up/Down Headphone Jack Power Button Scan Buttons Laser Safety Do not stare into the beam of the laser light from this device. The MC432/MC432L uses an imager Aiming System with a laser light that is visible to the human eye and is emitted from the scan window at the top of the device. Laser Light - Do not stare into this Beam Class 2 Laser Product. The maximum output radiation is 1 mW compliant with EN 60825-1 (2007) Important Notices and Precautions The manufacturer has made safety the first priority during the design stage. To avoid potential mishaps, please observe the following notices and precautions:

Do not stock this device under high temperature conditions that may cause the battery to overheat. Do not charge longer than required. When the charging light is red, stop charging immediately. Charge this device in a place without any water-spray or Important Notices When Using Before replacing the battery pack due to failure, shortened life, or unusual behavior, please confirm that the device has been used correctly, with no user operation issues involved. The manufacturer is not responsible for possible missing data or interference encountered during wireless transmissions. Do not use alcohol, benzene, organic solvents, cleaning liquid, or steel wool Do not scratch or mar the surface of the Scan Window in any way to avoid on the surface of this device. barcode scanning problems. Bluetooth This device is designed based on Bluetooth standard specifications. However, compatibility problems may still occur with other Bluetooth devices. Before using this device, please make sure there is no other wireless device operating within a short distance of the same application area that may cause wireless signal interference. Use a dry cloth to wipe any dust off of the AC adapter plug moisture. to avoid potential fire. Do not drop this device on hard surfaces. Do not place heavy objects on this device to avoid cracking from nearby TV or radio devices. SAR Compliance SAR Information (European Union):

Head: 0.297 W/kg@ 10g (CE) Body: 1.29 W/kg@ 10g (CE) This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements in Europe, a minimum separation distance of 0.5cm must be maintained between the uses body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Power and Frequency Ranges Radio Type Description Maximum Output Frequency Do not unplug the AC adapter with wet hands to avoid Do not use the AC adapter of the MC432/MC432L with any Do not place the device in liquids to prevent short-circuits or the enclosure. electric shock. other devices. fire. Do not place this device near an open fire. If the power or USB cable is seriously twisted or broken, stop using immediately to prevent electric shock, short-circuit, or fire. Stop using immediately if there is any unusual smell or overheating during charging or operation. Stop using immediately when there is liquid or dew on the device. Do not use the AC adapter outdoors. Please do not wrap the AC adapter with cloth or other objects that could block heat dissipation and cause electric shock or fire. When not charging, remove the AC adapter plug from the wall AC outlet socket to avoid a fire hazard. Signal Interference from TV or Radio Sometimes transmitting or receiving data may fail due to signal interference Bluetooth Bluetooth BR+EDR 2400~2483.5 MHz 10dBm Bluetooth 4.0-LE 2400~2483.5 MHz 0dBm Audio Safety To prevent possible hearing damage, do not listen at high volume levels for long periods of time. European Union Regulatory Notes 1. Requirements for AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV

/LI/LT/LU/HU

/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR.5150MHz~5350MHz is for indoor use only. 2. iMotion declares that the radio equipment type for the MC432/MC432L is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.iwaypro.com Hot Part Warning 2400~2483.5 MHz 18dBm 5150~5350 MHz 5475~5850 MHz 824~849 MHz 880~915 MHz 1710~1785 MHz 1850~1910 MHz 2.4GHz 5GHz GSM 850 GSM 900 GSM 1800 GSM 1900 WLAN GSM(For MC432L) WCDMA(Fo r MC432L) LTE Band 1 LTE Band 2 LTE Band 3 LTE Band 4 LTE Band 5 LTE Band 7 LTE Band 8 LTE(For MC432L) WCDMA Band I 1920~1980 MHz WCDMA Band II 1850~1910 MHz WCDMA Band IV 1710~1755 MHz WCDMA Band V 824~849 MHz WCDMA Band VIII 880~915 MHz 1920~1980 MHz 1850~1910 MHz 1710~1785 MHz 1710~1755 MHz 824~849 MHz 2500~2570 MHz 880~915 MHz 16dBm 16dBm 33dBm 33dBm 30dBm 30dBm 24dBm 24dBm 24dBm 24dBm 24dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm LTE Band 20 LTE Band 28 LTE Band 38 LTE Band 39 LTE Band 40 LTE Band 41 NFC GPS LTE(For MC432L) Other 832~862 MHz 703~748 MHz 2570~2620 MHz 1880~1920 MHz 2300~2400 MHz 2496~2690 MHz 13.56 MHz 1575.42 MHz 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which Increase the separation between the equipment and receiver. the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device meets all the other requirements specified in Part 15E, Section other antenna or transmitter. 15.407 of the FCC Rules. Max SAR0.991(Body) The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product is kept as far as possible from the users body or if the device is set to a lower output power if such function is available. Taiwan NCC Warning Statement

3010 221 SAR2.0W/Kg0.297W/Kg NCCGSM, WCDMA B1/8, LTE 1/3/7/8/28/38/41, WLAN, BT FCCSupportGSM, WCDMA B2/5, LTE 2/4/5/7/12/17/38/41, WLAN, BT Operation Temp.'-20C. to 50C.

/ Rating:

/Input : AC 100-240V, 50/60Hz, 0.5A

/Output :

(1) DC5V,3A / 9V, 2A

(2) DC 5V,2.5A / 9V, 2A (For USA) iWaylink Inc. 6F., No.288, Sec. 6, Civic Blvd.,Xinyi Dist., Taipei City, Taiwan https://www.iwaypro.com/

This transmitter must not be co-located or operating in conjunction with any

The temperature of battery surface may increase during operation. MC432/MC432L MC432/MC432L MC432/MC432L

: 045 MC432/MC432L MC432/MC432L USB/

LED Micro SD SIM (For MC432L)

/ USB USB USB/MC432 MC432/MC432L MC432/MC432L 045 AC 100-240V, 50/60Hz, 0.5A

(1) DC 5V,3A/9V,2A

(2) DC 5V,2.5A/9V,2A(For USA) Micro SD / SIM(For MC432L) 1. MC432/MC432L 2. 3. SIMMicro SD 4. SIMMicro SD 5. 6. MC432/MC432USB 1. 2. 3. 4. LED LED

1. 2. MC432/MC432L 3. 4. SAR SAR FCC MC432/MC432L

- 2 1 mWEN 60825-12007 AC AC MC432/MC432L AC USB AC AC AC AC 1. AT / BE / BG / CZ / DK / EE / FR / DE / IS / IE / IT / EL / ES / CY / LV / LI /

LT / LU / HU / MT / NL / NO / PL / PT / RO / SI / SK / TR / FI / SE / CH / UK /

HR 5150MHz~5350MHz 2. iMotion MC432 2014/53 www.iwaypro.com FCC151 2 FCC15B

FCC FCC15.40715E FCC SAR0.991W/Kg () Taiwan NCC Warning Statement

3010 221 SAR2.0W/Kg0.297W/Kg NCCGSM, WCDMA B1/8, LTE 1/3/7/8/28/38/41, WLAN, BT Operation Temp.'-20C. to 50C.

/ Rating:

/Input : AC 100-240V, 50/60Hz, 0.5A

/Output :

(1) DC5V,3A / 9V, 2A

(2) DC 5V,2.5A / 9V, 2A (For USA)

FCCSupportGSM, WCDMA B2/5, LTE 2/4/5/7/12/17/38/41, WLAN, BT 0.297 W / kg @ 10gCE 1.29 W / kg @ 10gCE 5150 5350 MHz 0.5 GSM(For MC432L) BR + EDR 2400~2483.5 MHz 10dBm 2400~2483.5 MHz 0dBm 4.0-LE 2.4GHz 5GHz GSM 850 GSM 900 GSM 1800 GSM 1900 WCDMA I 2400~2483.5 MHz 5150~5350 MHz 5475~5850 MHz 824~849 MHz 880~915 MHz 1710~1785 MHz 1850~1910 MHz 1920~1980 MHz WCDMA(For MC432L) WCDMA II 1850~1910 MHz WCDMA IV 1710~1755 MHz WCDMA V 824~849 MHz WCDMA VIII 880~915 MHz LTE 1 LTE 2 LTE 3 LTE 4 LTE 5 LTE 7 LTE 8 LTE 20 LTE 28 LTE 38 LTE 39 LTE 40 LTE 41 NFC GPS 1920~1980 MHz 1850~1910 MHz 1710~1785 MHz 1710~1755 MHz 824~849 MHz 2500~2570 MHz 880~915 MHz 832~862 MHz 703~748 MHz 2570~2620 MHz 1880~1920 MHz 2300~2400 MHz 2496~2690 MHz 13.56 MHz 1575.42 MHz Other 18dBm 16dBm 16dBm 33dBm 33dBm 30dBm 30dBm 24dBm 24dBm 24dBm 24dBm 24dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm LTE(For MC432L) 288 6 https://www.iwaypro.com

RF_160, Issue 04

(iWaylink Inc.) Declaration of Authorization We Name: iWaylink Inc. Address: 6F., NO. 288, SEC. 6, CIVIC BLVD., XINYI DIST., 11087 City: TAIPEI CITY Country: TAIWAN (R.O.C.) Declare that:

Name Representative of agent: | Ms. Melody Wu. Agent Company name: BTL Inc. Address: No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist.174, City: Taipei Country Taiwan is authorized to apply for Certification of the following product(s):

Product description: Mobile Computer Type designation: MC432 Trademark: iMotion Validity/ expiry date: March 7, 2021 to March 6, 2022 on our behalf. Date: 2021-03-07 City: TAIPEI CITY Name: Felix Huang Function: WIFI/BT/GPS/NFC Signature: helix Wain!

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

iWaylink Inc. 6F., NO. 288, SEC. 6, CIVIC BLVD., XINYI DIST., TAIPEI CITY 11087, TAIWAN (R.O.C.) Date: May 21, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 SUBJECT: FCC Application for FCC ID: SPYMC432 To Whom It May Concern:

We, iWaylink Inc., declare our product, Mobile Computer with FCC ID: SPYMC432, will disable WWAN function permanently when sold in United States by software. WWAN function will not enabled/overridden by end users via any other mean. Sincerely yours, 2021-05-21 Felix Huang felix.huang@iwaypro.com

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_5071, Issue 8 Page 1 of 1 Company Name: iWaylink Inc. Address: 6F., NO. 288, SEC. 6, CIVIC BLVD., XINYI DIST., 11087 City: TAIPEI CITY Country: TAIWAN (R.O.C.) To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: SPYMC432 Reference number: #####

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

XX] Bill(s) of Material XX] Block Diagrams XJ Operational Description [Xx] Schematic Diagrams XJ Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See nofes below):

[x] Internal Photos User's Manual X] Test Set-up Photos XX] External Photos Date: 2021-03-07 Name and signature of applicant: Felix Huang Veoh. Huang, Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Robert Bosch Engineering & Business Solution Pvt. Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2021/03/08 We, the undersigned company Company Name: iWaylink Inc. Address: 6F., NO. 288, SEC. 6, CIVIC BLVD., XINYI DIST., 11087 TAIPEI CITY TAIWAN (R.O.C.) Declare that:

Product description: Mobile Computer Type designation: MC432 Brand: iMotion FCC ID: SPYMC432 Only channels 1~171 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ech e Haan |

Name: Felix Huang |

Tel: +886 2 8979 5055 Ext.148 Email: felix.huang@iwaypro.com

DTS-UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID : SPYMC432

(1) DFS Device -- [-]Master, [_]Client with Radar detection capability, EXIclient without radar detection capability, [-JN/A

{2} Active / Passive Scanning , Ad hoc mode access point capability Frequency Active Scanning passive scanning Ad Hoc Mode or Access point Band (MHz) (the device can transmit | (where the device is can WIFI Direct capability a probe (beacon)) listen only with no capability probes) 2412-2462 [_]Yes, BX]No xyes, [_]No [ ]es, DX]No 2422-2452 | [ les, EX]No 5180-5240 | [_lves, IX]No Xlyes, [_]No [ lyes, KXINo | [_lyes, EX]No 5190-5230 | [_]yves, X]No Bxlyes, [_|No [ Ives, x]INo | [_lYes, KX]No 5210 [ Yes, XX]No bx<lYes, [ |No [_lYes, DX<]No

DXlyes, [_]No [_ Yes, XINo [_lYes, D<]No

5260-5320 [_lYes, DXINo hx<lves, [_|No | les, <]No [_ Yes, Xx<|No 5270-5310 [_lYes, KX]No Xxlyes, [_INo [_lyes, XINo | [_]yes, EX}No 5290- [_|Yes, KX]No xyes, [_|No [_lves, IX]No [_lves, EX|No 5500-5700 [_lYes, EX]No [xXlyes, []No [_lYes, XINo | lYes, XINo

| 5510-5670 | [lves, EXINo Xlyes, [_]No [_lyes, X<]No_ | [ Yes, Dx]No

| 5530-5690 | [lyes, EX]No Xlves, [_]No [_]yes, DXINo | [_]ves, Xx]No 5745-5825 [_lYes, X]No Xlves, [_|No [ lyves, XXINo | [ les, EXINo 5755-5795 [ |Yes, X]No [Xlyes, L_|No [ les, X<INo | [ les, Dx]No 5775 [ |Yes, DX|No Ixlves, [_]No L_lyes, XxINo | [ yes, ExINo

(3) Country code selection ability - []Yes, IXINo If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection)

(4) Meet 15.202 requirement - PxlYes, [_]No, Pls check below :

[JA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. PXIA client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer.

[ Apply, EXINo Apply (if apply, pls help to provide explanation on it was implement, and how software was controlled)

(6) Please help to provide justification how device was restricted to operate in 5600-5650MHz in below. The device operation is discontinued in the absence of information that complies the requirement Teli .e Hite 4 (Signature) Company Name: iWaylink Inc. Name & title : Felix Huang & Director Address : 6F., NO. 288, SEC. 6, CIVIC BLVD., XINY] DIST., TAIPE! CITY 11087, TAIWAN (R.O.C.) Telephone: +886 2 8979 5055 Ext.148