JRN-130K 3G/GSM IT Controller User Manual Doc# : AN-1490012-2 Ver.1.02 Date: Oct 15, 2014
@Copyright Japan Radio Co., Ltd. Mobile Communication Group Engineering Department Communication Products Division 3G/GSM IT Controller JRN-130K 2/19 AN-1490012-2 History Date Sep 16, 2014 Oct 16, 2014 Oct 16, 2014 Number 1.00 1.01 1.02 DRAFT The contents of change 3G/GSM IT Controller JRN-130K 3/19 AN-1490012-2 Index 1 Introduction.............................................................................................................................. 4 2 Composition ............................................................................................................................ 5 3 Function .................................................................................................................................. 6 4 Product specification .............................................................................................................. 7 5 Block Diagram ...................................................................................................................... 11 6 External Interface ................................................................................................................. 12 7 Outline ................................................................................................................................... 14 8 Option .................................................................................................................................... 15 9 Compliance with FCC and IC Rules and Regulations ...................................................... 18 3G/GSM IT Controller JRN-130K 4/19 AN-1490012-2 1 Introduction 3G/GSM IT Controller (JRN-130K) is a vehicle small terminal to have the GPS measureme nt function and the 3G/GSM communication function, and to use it for management and posit ional information track / theft pursuit etc. of the vehicle. As a communications protocol TCP/IP are mounted. The terminal made by the Gemaltos PHS8-P is installed. 1.1 Overview The main specification is presented as follows. No. Items Specification 3G/GSM Communication modu le
(PHS8-P Gemalto) UMTS 800/850 Band UMTS 800/850 Band*
UMTS 900 Band*
UMTS 1900 Band*
UMTS 2100 Band GSM850 GSM900 GSM1800 GSM1900 GPRS: Multislot Class 12 EGPRS: Multislot Class 12 CSD: V.110, RLP, non-transpa rent DP-BR0-DSC(BNC) NIPPON ANTENNA NAY-3930G NBB-13001300mAh/6.0V DC+20V+32V 400mA max Power-saving : 7.5mAmax 1 Comnication module 2 Data transfer 3 4 5 6 Communication Antenna GPS Antenna Internal Battery Current and Voltage Remarks
*:Only compatible module 3G/GSM IT Controller JRN-130K 5/19 AN-1490012-2 2 Composition NO. Equipment 3G/GSM Controller Communication Module
(1)
(2) Battery pack GPS Antenna 3G/GSM Communication antenna 1 2 3 IT Controller Battery pack Power Supply & Control Block Communication Module Model Quantity JRN-130K PHS8-P Gemalto NBB-1300 NAY-3930G DP-BR0-DSC(BNC) NIPPON ANTENNA 1 1 1 1 1 GPS Antenna 3G/GSM Communication Antenna Fuse To Battery To Construction machine Connection I/F Cable
(Note#1) Please prepare IF cable by the visitor side.
(Note#2) A connection I/F cable requires a fuse because of over-current protection. Please insert the fuse in three places of a battery, GND, and ACC.
(Note#3) Please do not take a power supply from DC cigar. It becomes the cause that operation is poor, according to loose connection. 3G/GSM IT Controller JRN-130K 6/19 AN-1490012-2 3 Function
(1) Operation in ACC OFF executes the following.
-1. Send data in daytime and nighttime.
-2. Respond to calling from the server.
-3. Acquisition of information on the actual location by GPS, and Generation of warning outside area.
(2) Storage of operation data
(3) Timer
(4) Backup Even if the main source of power is cut, the date and time are maintained. The re-charge battery is installed. Even if it disconnects a power supply, the operational mode and network transmission setting of IT controller are held.
(5) Serial communication ports Connection I/F (CAN), 115200bps(monitor)
(6) GPS function Present location is acquired.(WGS84)
(7) 3G/GSM communication
(8) Software rewriting function A software rewriting is done by using the monitor port.
(9) Serial communications with the external equipment are done by the serial commands. 1) Key ON 2) Engine ON 3) Key OFF 4) Alarm 5) Fuel residual quantity 6) Engine amount of water 7) Engine oil level 8) Hydraulic oil level 9) Engine oil pressure 10) Engine water temperature 11) Air cleaner 12) Charge 13) DS (compulsive key OFF) 14) RT (the present state inquiry) 15) HS (foxtail millet meter change) 16) CO (command) 17) Automatic key-off judging processing
(10) Communication protocol It transmits to the mail server by the e-mail.
(11) Time Zone Setting UTC+, and operating. 3G/GSM IT Controller JRN-130K 7/19 AN-1490012-2 4 Product specification 4.1 Common Specification NO Items Power supply voltage Battery pack SIM Interface Current Circumference environment Dimension Weight Specification performance DC+20 to +32V NiMH rechargeable battery NBB-13001300mAh/6.0V 1.8V/3.0V
-30 to +70 degree C
-40 to +80 degree C 0% to 90% (don't dew) Communication: max current Less than 400mA+25 Idle:7.5mAmaxWhen not charging the battery Operation:
Preservation:
Humidity of operation:
At use in battery, Operation:
0 to 70 degree C of the charge operates. 136.4(W)220.0(D)43.6(H) mm 1,300g or less
-20 to +70 degree C Case material SPCC 1 2 3 4 5 6 7 8 3G/GSM IT Controller JRN-130K 8/19 AN-1490012-2 4.1 Serial Interface Specification Items
(1) A. DTE CAN NO 1 2 3 4 Data transmission Speed Communication format Switch to the RS-232C By the chip jumper change SAE J1939 250/500 kbps Extension 29bit Specification performance
(1) B. DTE RS-232C NO Items 1 2 3 4 5 6 7 8 Data transmission Signal level Speed Frame length Data Length Start bit Parity bit Stop bit
(2) ConsoleDebug Items NO 1 2 3 4 5 6 7 8 9 Data transmission Signal level Speed Frame length Data Length Start bit Parity bit Stop bit Character Specification performance Half duplex start-stop synchronization RS-232C 4800bps Variable-length 8 bit 1 bit None 1 bit Specification performance Half duplex start-stop synchronization RS-232C 115200bps Variable-length 8 bit 1 bit None 1 bit EUC 3G/GSM IT Controller JRN-130K 9/19 AN-1490012-2 4.1 GPS Receiver Specification Items NO 1 2 3 4 5 6 Model Specification performance CCA-705JZ (JRC) Max 16hannel (high-speed search channel) 1575.42MHz(L1)C/A code UTC 5.3m 2DRMS Receiving system Received frequency Land survey system WGS-84Default Time system Positioning accuracy Position Speed Direction Speed T.T.F.F
(Without signal discontinuation) 0.04m/sec. RMS Less than 0.14RMS (Speed 60km/h) 1 sec Hot start:
Warm start:
Cold start:
4s typ./15s max. 33s typ./55s max. 35s typ./60s max. 7 8 Open skies 4.1 3G/GSM module Specification By PHS8-P 3G/GSM communication module specification. 3G/GSM IT Controller JRN-130K 10/19 AN-1490012-2 4.1 External connector specification NO 1 Items Power/Serial connector 2 3 GPS antenna connector Communication antenna Specification performance XMR (JST) Model : XMR-09V Cable side connector model : XMP-09V(JST) GT5 (HIROSE) Model : GT5P-1PP-HU(70) BNC (Yuetsu Seiki) Model : BNC-PJ-C0-6F 4.1 Software JRN-130K application software external I/F specifications is prescribed about the command list a nd block structure about software. Implement the software that customers have created. 3G/GSM IT Controller JRN-130K 11/19 AN-1490012-2 5 Block Diagram 3G/GSM IT Controller JRN-130K 12/19 AN-1490012-2 6 External Interface 6.1 External Interface Specification Pin Assign NO 1 2 3 4 5 6 7 8 9 Name GND Moni-Tx Moni-Rx CAN H CAN L CAN_EN GND ACC BAT Remarks GND MonitorITcontroller ITcontrollerMonitor CAN Low-Level Voltage I/O CAN High-Level Voltage I/O CAN Enable GND ACC signal Main battery 6.2 GPS Antenna Connector 1 9 Pin Assign NO. 1 2 Name RF GND Remarks Receive GND 6.1 Communication Antenna Connector Pin Assign NO. 1 2 Name RF GND Remarks TX/RX GND 3G/GSM IT Controller JRN-130K 13/19 AN-1490012-2 6.1 Equivalent circuit DC/DC Converter to PWR SPLY 3.3V To CPU from CAN Interface IC from CAN Interface IC Enable control circuit 330 330 from Serial Interface IC from Serial Interface BAT ACC GND CANH CANL CAN_EN MON-R MON-T GND 9 8 7 4 5 6 3 2 1 3G/GSM IT Controller JRN-130K 14/19 AN-1490012-2 Outline 7 8 3G/GSM IT Controller JRN-130K 15/19 AN-1490012-2 Option 8.1 GPS antenna
(1) Specification NO Items 1 2 3 4 5 6 7 8 9 Power supply voltage Consumption current Cable Temperature range of operation Storage temperature range Humidity Received frequency range Polarized wave Profit 10 Output impedance 11 OUTPUT VSWR 12 Connector
(2) Outline Specification performance 2.7V to 3.3V 12mA to 30mA 1. 5D Cable and 5M (Black)
-30 degree C to +85 degree C
-40 degree C to +100 degree C 20% to 95%
(relativity, however thing without dew condensation) 1575. 421.023MHz Right-handed circular polarization 256dBi
(ascending vertical angle = 90 degrees) 50 ohms 2.0, or less GT5-1P-HU (HIROSE) mm 3G/GSM IT Controller JRN-130K 16/19 AN-1490012-2 8.2 Communication antenna
(1)Specification No. Items 1 Model Antenna type 2 3 Purpose 4 Weight 5 Environmental Regulation Frequency 6 7 8 9 Nominal impedance VSWR Peak gain 10 Polarization 11 Directivity 12 Input power 13 Cable loss
(Reference) 14 Operating temperatur 15 Storage temperature 16 Operating humidity li e range range mits 17 Connector Specification performance DP-BR0-DSC(BNC)
/2 Shortened type Dipole antenna For the indoor antenna, double-sided tape attachment approximately 70g RoHS and ELV 880915MHz/925960MHz 17101766MHz/18051880MHz 18501910MHz/19301990MHz 815925MHz 1884MHz1920MHz 815MHz2170MHz A:US800/GSM850 824849MHz/869894MHz B:GSM900 C:GSM1800 D:PCS/GSM1900 E:CDMA1X F:PHS
(1)830880MHz/(2)19202170MHz G:FOMA 19601980MHz/21502170MHz H:SBMW-CDMA I:GPS 1575.42MHz 50 2.3 at the end of the cable. It is measured in free space. A,B,E,G-(1) cable. C,D,F,G-(2) cable. Vertical Horizontal plane omni-directional Not exceeding 2W 1.5D Coaxial cable 900MHz 1.58dB / 2.5m 2000MHz
-30 +80 degree C not exceeding 1.0dBi at the end of the not exceeding 3.5dBi at the end of the 2.45dB / 2.5m
-40 +85 degree C 0%95%
BNC 3G/GSM IT Controller JRN-130K 17/19 AN-1490012-2
(2)Outline NO. Items 1 2 3 4 5 Case 1.5D Coaxial cable BNC Two-sided adhesive tape Label Specification performance AES 2.5m10cm C3604Ep-Cu/Ni Tetoron film 3G/GSM IT Controller JRN-130K 18/19 AN-1490012-2 9 Compliance with FCC and IC Rules and Regulations FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC B B Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 768B-JRN130K) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
: Half length dipole antenna/DP-BRO-DCS (BNC) Antenna type/Model name
: 800MHz-1GHz -0.58dBi Maximum Antenna gain
(including the cable loss) 1GHz-2.5GHz +1.05dBi Nominal impedance
: 50 Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils r adio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
3G/GSM IT Controller JRN-130K 19/19 AN-1490012-2
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil d oit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptibl e d'en compromettre le fonctionnement. Le prsent metteur radio (IC: 768B-JRN130K) a t approuv par Industrie Canada pour f onctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible max imal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont stricteme nt interdits pour l'exploitation de l'metteur. Type d'antenne /Nom du modle : Antenne diple demi-longueur/DP-BRO-DCS (BNC) Le gain maximal de l'antenne : 800MHz-1GHz -0.58dBi
(La perte du cble est incluse) 1GHz-2.5GHz +1.05dBi Impdance nominale
: 50 FCC/IC RF exposure compliance 1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Normes d'exposition RF 1) Afin de se conformer aux normes FCC / IC RF exigences de conformit de l'exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de l'a ppareil et les personnes. 2) Cet metteur ne doit pas tre co-localises ou oprant en conjonction avec une autre antenne ou metteur.