all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Instruction Manual | Users Manual | 1.03 MiB | ||||
1 | Attestation Statements | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | native | ||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | Parts List/Tune Up Info | |||||||
1 | Schematics | |||||||
1 |
|
Test Report | Test Report | 2.09 MiB |
1 | Instruction Manual | Users Manual | 1.03 MiB |
NAVTEX Receiver NCR-333 Instruction Manual 7ZPJD0304 Preface Thank you for purchasing NCR-333 NAVTEX Receiver. The NAVTEX receiver automatically receives NAVTEX service broadcasts supplied in English and other optional languages. Be sure to read this manual for full comprehension before using the equipment. Save this manual near at hand for quick reference in the future. Make use of this manual when experiencing operation difficulties. i Concerning the symbols Before Operation This manual uses the following symbols to explain correct operation and to prevent injury or damage to property. The symbols and descriptions are as follows. Understand them before proceeding with this manual. WARNING CAUTION Indicates a warning that, if ignored, may result in serious injury or even death. Indicates a caution that, if ignored, may result in injury or damage to property. Examples of symbols The symbol indicates caution (including DANGER and WARNING). The illustration inside the symbol specifies the content of the caution more accurately. (This example warns of possible electrical shock.) The symbol indicates that performing an action is prohibited. The illustration inside the symbol specifies the contents of the prohibited operation. (In this example disassembly is prohibited.) The symbol indicates operations that must be performed. The illustration inside the symbol specifies obligatory instructions. (In this example unplugging is the obligatory instruction.) ii Handling Precautions WARNING Do not disassemble or customize this unit. Doing so may cause fire, electrical shock or malfunction. Do not get this equipment wet or spill any liquids on or near this equipment. Doing so causes electrical shock or malfunction. Do not use a voltage other than specified. Doing so may cause fire, electrical shock or malfunction. Do not attempt to inspect or repair the inside of this equipment with the exception of qualified service personnel, as doing so may cause fire, electric shock or malfunction. If any malfunctions are detected, contact our service center or agents. iii Handling Precautions CAUTION Do not use this equipment for anything other than specified. Doing so may cause malfunction or damage to persons. Do not adjust the trimmer resistors or the trimmer capacitors on the PCB unit. Doing so may cause malfunction or damage to persons. They are preset at the factory. Do not install this equipment in a place other than specified or in one with excessive humidity, steam, dust or soot. Doing so may cause fire, electric shock, malfunction or damage to persons. Do not place this equipment anywhere vibration or impact is likely to occur. Doing so may cause a fall or damage to property and persons. Do not place any objects on this equipment. Doing so may cause a fall, malfunction or damage to property and persons. Leave installation of this equipment to our service center or agents. Installation by an unauthorized person may lead to malfunction. iv External Views NCR-333 NAVTEX Receiver NAW-333 NAVTEX Antenna v NBG-319 Power Supply Unit NBG-320 Power Supply Unit vi CONTENTS Preface .................................................................................................................. i Before Operation .................................................................................................. ii Handling Precautions ........................................................................................... iii External Views ...................................................................................................... v 1. GENERAL ..................................................................................................... 1-1 1.1 Outlines .................................................................................................... 1-1 1.2 Features ................................................................................................... 1-1 1.3 Components ............................................................................................. 1-2 1.3.1 Standard Components .......................................................................... 1-2 1.3.2 Options ................................................................................................. 1-2 1.3.3 Configuration ......................................................................................... 1-3 1.4 Outline ..................................................................................................... 1-4 2. INSTALLATION DIAGRAM ............................................................................ 2-1 3. PART NAMES AND FUNCTIONS ................................................................. 3-1 3.1 NCR-333 NAVTEX Receiver .................................................................... 3-1 4. DISPLAYS ..................................................................................................... 4-1 4.1 Displays ................................................................................................... 4-1 4.1.1 Message text screen ............................................................................. 4-1 4.1.2 Message list 1 screen ........................................................................... 4-2 4.1.3 Message list 2 screen ........................................................................... 4-2 4.1.4 Save message list screen ..................................................................... 4-3 4.1.5 Position/date screen ............................................................................. 4-3 4.1.6 Setup screen ......................................................................................... 4-4 5. INSTALLATION ............................................................................................. 5-1 5.1 Installation ................................................................................................ 5-1 5.1.1 Selection of location .............................................................................. 5-1 5.1.2 Mounting ............................................................................................... 5-1 6. OPERATION .................................................................................................. 6-1 6.1 Menu Tree ................................................................................................ 6-1 6.2 Basic Operation ....................................................................................... 6-2 6.2.1 Turning ON the power............................................................................. 6-2 6.2.1.1 Start up (Normal) ................................................................................ 6-2 6.2.1.2 Start up (Abnormal-1) ......................................................................... 6-3 6.2.1.3 Start up (Abnormal-2) ......................................................................... 6-3 6.2.1.4 Start up (Abnormal-3) ......................................................................... 6-4 6.2.2 Turning OFF the power........................................................................... 6-4 6.2.3 Backlight adjustment............................................................................... 6-5 6.2.4 Contrast adjustment .............................................................................. 6-5 6.2.5 Alarm ...................................................................................................... 6-6 6.2.6 Screen switching..................................................................................... 6-6 6.2.7 Displaying the message.......................................................................... 6-7 6.2.7.1 Message text ...................................................................................... 6-7 6.2.7.2 Message list 1 .................................................................................. 6-13 6.2.7.3 Message list 2 .................................................................................. 6-21 6.2.7.4 Save message list ............................................................................ 6-22 vii 6.3 MAIN MENU .......................................................................................... 6-24 6.3.1 RX STATION screen ........................................................................... 6-25 6.3.1.1 Receiving mode setting (RX MODE)................................................. 6-26 6.3.1.2 Receiving channel setting (OPERATING FREQ.) ............................. 6-26 6.3.1.3 Automatic receiving station selection (AUTO MODE SETTING)....... 6-27 6.3.1.4 Manual receiving station selection (MANUAL MODE SETTING) ...... 6-31 6.3.2 Receiving message type settings (MESSAGE TYPE SETTING) ......... 6-32 6.3.3 DISPLAY setting menu (DISPLAY SET) ............................................. 6-33 6.3.3.1 Contrast adjustment (CONTRAST) ................................................. 6-34 6.3.3.2 Brightness settings (DIMMER) ........................................................ 6-34 6.3.3.3 Buzzer settings (BUZZER) .............................................................. 6-34 6.3.3.4 Time Difference setting (LOCAL TIME) ........................................... 6-35 6.3.3.5 Assigning to the USER key (USER KEY SETTING) ....................... 6-36 6.3.3.6 POSITION/TIME screen settings (POS/TIME DISP.SET) ............... 6-37 6.3.4 NAVTEX setting menu (NAVTEX) ...................................................... 6-38 6.3.4.1 Character size setting (CHARACTER SIZE) ................................... 6-39 6.3.4.2 CER setting (CER DISP.SETTING) ................................................. 6-39 6.3.4.3 Automatic scrolling setting (MESSAGE SCROLL) ............................ 6-40 6.3.4.4 Scrolling speed adjustment (MESSAGE SPEED) ............................. 6-40 6.3.4.5 External printer settings (PRINTER PROPERTY)............................. 6-41 6.3.5 MAINTENANCE menu (MAINTENANCE)............................................ 6-42 6.3.5.1 Self Diagnosis (SELF DIAGNOSIS) .................................................. 6-43 6.3.5.2 NAVTEX alarms (NAVTEX ALARM).................................................. 6-46 6.3.5.3 Setting status of the NAVTEX Receiver (STATUS) ........................... 6-48 6.3.5.4 Port monitor (PORT MONITOR)........................................................ 6-49 6.3.5.5 Software version (SOFTWARE VERSION)....................................... 6-52 6.3.6 The display language setting (LANGUAGE) ........................................ 6-52 7. MAINTENANCE AND INSPECTION ............................................................. 7-1 7.1 General Maintenance and Inspection ...................................................... 7-1 7.2 Periodic Inspection .................................................................................. 7-2 7.2.1 Confirming the Rx station and Message type ...................................... 7-2 7.2.2 Confirming the Alarm Status................................................................... 7-2 7.3 Trouble Shootings ..................................................................................... 7-3 7.3.1 Trouble Shootings .................................................................................. 7-3 7.3.2 Maintenance Units ................................................................................. 7-4 7.3.3 Spear parts for periodic maintenance..................................................... 7-4 8. AFTER-SALES SERVICE ............................................................................. 8-1 Before returning repair .................................................................................. 8-1 Periodical maintenance recommended ......................................................... 8-1 9. SPECIFICATIONS ........................................................................................ 9-1 9.1 General (NCR-333) ................................................................................. 9-1 9.1.1 Receiver ............................................................................................... 9-1 9.1.2 Operation panel .................................................................................... 9-1 9.1.3 Power supply ........................................................................................ 9-1 9.1.4 External interfaces ................................................................................ 9-1 9.1.5 Environmental condition ....................................................................... 9-2 9.1.6 Supported interface sentences ............................................................. 9-2 9.1.7 Received message log ......................................................................... 9-2 9.2 NAVTEX ANTENNA (NAW-333 - Option) ................................................ 9-3 9.2.1 Electrical characteristics ....................................................................... 9-3 9.2.2 Environmental condition ....................................................................... 9-3 viii 9.3 POWER SUPPLY UNIT (NBG-320 - Option) ........................................... 9-3 9.4 POWER SUPPLY UNIT (NBG-319 - Option) ........................................... 9-3 ix x 1. GENERAL 1.1 Outlines The NAVTEX NCR-333 function receives and displays the various types of information broadcast at frequencies of 518 kHz, 490 kHz and 4209.5 kHz, such as: navigational warning, meteorological warning, search and rescue information, and other types of information. NCR-333 also provides the function that selects information type and coast station for intended uses. 1.2 Features Receiving NAVTEX broadcasts NCR-333 receives NAVTEX broadcasts automatically on 518 kHz, 490 kHz, and 4209.5 kHz. Large screen allows comfortable visibility NCR-333 has a 5.7-inch LCD screen display with clear visibility. It also provides three different character sizes of display, and can be selected at your convenience. Message saving function NCR-333 can store up to 200 message identification codes for 70 hours. Moreover, the stored message of each channel can be saved up to 50 messages permanently. Automatically receiving station setting function NCR-333 can select receiving stations automatically on GPS position data is valid. Permanent storage of data settings NCR-333 can set and store the message type and seashore station that receive to internal memory. The data, therefore, does not need to be re-set, even after power has been turned off. Dual voltage supply input NCR-333 can be used on wither 24 VDC or 12 VDC vessels. Self-diagnosis Function NCR-333 has automatic self-diagnosis function. This function allows easy maintenance and high system reliability. Connection to external equipment NCR-333 can be used with the JRC Total Navigator (ECDIS) and external serial printers. 1-1 1.3 Components 1.3.1 Standard Components No. 1 2 3 4 5 Name NAVTEX Receiver Tapping screws Instruction manual Operation card Antenna cable Type NCR-333 MPTG31659 7ZPJD0304 7ZPJD0306 7ZCJD0251 Quantity 1 1 1 1 1 Remarks 4 tapping screws Present volume 0.5 m Options NAVTEX Antenna Power supply unit Power supply unit External printer Printer cable Printer cable Printer power cable Printer connection kit Printer paper NAVTEX buzzer DMC External buzzer connection kit Data connection kit Console mount kit Type NAW-333 NBG-319 NBG-320 DPU-414 7ZCJD0254 7ZCJD0270 7ZCJD0257B 7ZXJD0076 6ZCAF00252A CGC-300A NCH-321A 7ZXJD0074 7ZXJD0075 MPBC39314 Quantity Remarks 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Whip antenna for NCR-333 12 / 24VDC input 100/220VAC Manual Setting D-sub 9-pin 1.5 m D-sub 9-pin 10 m 1.5 m 7ZCJD0257B and 2-pin terminal block 112mm x 50mm 25m x1 External buzzer Distress Message Controller 1.5 m cable and 2-pin terminal block 1.5 m cable and 3-pin terminal block 1.3.2 Options No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1-2 NAW-333 NAVTEX ANTENNA
(OPTION) 1.3.3 Configuration System Block Diagram NBG-320 POWER SUPPLY
(OPTION) AC 110/220V DC +12V NCR-333 NAVTEX RECEIVER DPU-414 PRINTER
(OPTION) DC +6.5V NBG-319 POWER SUPPLY
(OPTION) DC +12/24V 1-3 1.4 Outline Outline Drawing of NCR-333 NAVTEX Receiver Unit: mm Mass: approx. 2.1 kg 1-4 Outline Drawing of NAW-333 NAVTEX Antenna Unit: mm Mass: approx. 0.3 kg 1-5 7
. 0 5 1 5
. 0 0 7 Outline Drawing of NBG-319 Power Supply Unit 60.5 1.5 1.5 Unit: mm Mass: approx. 0.9 kg
. 7 0 0 2 5 0 0 7 Outline Drawing of NBG-320 Power Supply Unit 60.5 1.5 1.5 Unit: mm Mass: approx. 3.3 kg 1-6 Outline Drawing of DPU-414 Printer Unit: mm Mass: approx. 0.7 kg 1-7 1-8 Notes:
2. INSTALLATION DIAGRAM CAUTION Leave installation of this system to our service center or agents. Installation by an unauthorized person may result in malfunction. A 0 0 3
-
C G C X E T V A N R E Z Z U B
+123
-
M L A T X E
+
M L A T X E A 1 2 3
-
H C N C M D D N G S 8 2
-
+
L A D 0 3 L A D 9 2 L A D 7 2 0 1 B T
-
M L A T X E
+
M L A T X E I Y A L P S D E S O P R U P I T L U M I E C N A N E T N A M E T O M E R R E V R E S E C R U O S R E W O P Y C N E G R E M E V 4 2
/
2 1
+
C D E C R U O S R E W O P Y C N E G R E M E V 4 2
/
2 1
+
C D E C R U O S R E W O P Y C N E G R E M E V 0 2 2
/
0 1 1 C A E C R U O S R E W O P Y C N E G R E M E V 4 2
+
C D V 4 2
/
2 1
+
C D
+
-
E C R U O S R E W O P
*
) 5
) 5
. 1
-
C Y P D S I J
(
2
. 1
-
C Y P D S I J
(
2 m m 5
. 1 x 2
*
m m 5
. 1 x 2
*
) 1
-
S C Y T T S I J
(
2 m m 5 7
. 0 x 2 x 1
*
) 1
-
S C Y T T S I J
(
2 m m 5 7
. 0 x 2 x 1
*
) 5
. 1
-
C Y P D S I J
(
2 m m 5
. 1 x 2
*
) 5
. 1
-
C Y P D S I J
(
2 m m 5
. 1 x 2
*
2 EXT ALM-
EXT ALM+
2 J EXT ALM Connection KIT
(Cable Length = 1.5m) 7ZXJD0074
(Cable Length = 1.5m) 7ZXJD0075 DATA Connection KIT 9 1 3
-
G B N Y L P P U S R E W O P V 5
. 6 C D T U O
+-
V 4 2 N I
/
2 1 C D V 4 2
/
2 1 C D T U O
.
) 5 1
-
C Y P D S I J
(
2
.
) 5 1
-
C Y P D S I J
(
2 m m 5
. 1 x 2
*
m m 5
. 1 x 2
*
UV
+-
0 2 3
-
G B N Y L P P U S R E W O P N I C A V 5
. 6 C D T U O N I V 4 2 C D V 2 1 C D T U O 3 3 3
-
R C N I R E V E C E R X E T V A N
*
D N G 4 1 4
-
U P D R E T N R P I
) m 0 1 n e e w e b h t t g n e l l e b a c m u m x a M i s i 4 1 4
-
U P D d n a 0 2 3
/
9 1 3
-
G B N 4 5 2 0 D J C Z 7
) m 5
. 1
=
t h g n e L l e b a C
(
r o 0 7 2 0 D J C Z 7 m 0 1
=
h t g n e L l e b a C
(
l y n o e b a C l
:
B 7 5 2 0 D J C Z 7
)
. t m 5 1
=
h g n e L e b a C l
(
I T K n o i t c e n n o C r e n i r t P 6 7 0 0 D J X Z 7
)
. t m 5 1
=
h g n e L e b a C l
(
PRINTER / MAINTENANCE 2 0 5 J I M L A T X E 3 3 3 2
-
N M PC T N U X R I S D 3 J 1 J 2 T U O A T A D X E T V A N A N N E T N A 3 5 1 J m h o 0 5 2 5 1 J 1 5 1 J Z
-
i H 1 3 GND-ISO TX-B TX-A 1 3 GND-ISO TX-B TX-A 1
*
3 1 GND DC -
DC+
GND-ISO TX-B TX-A GND-ISO RX-B RX-A
-BK
+BK
-ANT
+ANT 1 5
-
U
-
8 1 0
/
/
0 3
-
H L W
) T N E M H C A T T A
(
NAVTEX ANTENNA NAW-333
(Cable Length = 1.5m) 7ZXJD0075 DATA Connection KIT
*2 x 1.5mm2 (JIS DPYC-1.5)
) 1 5 2 0 D J C Z 7 m 5
. 0
=
h t g n e L e b a C l
(
U 0 1
-
P N
-
:
r o t c e n n o C l
) y p p u S C R J
(
Y U 0 1
-
G R
*
. x a m m 0 5 U 0 1
-
P N
-
:
r o t c e n n o C l
) y p p u S C R J
(
K C E D E V O B A K C E D W O L E B
/
U A 8 5
-
G R
. p y T m 2 4
. 0 E L B A C L A X A O C I R O T C E N N O C D N A
) T N E M H C A T T A
(
+-
+-
D N G
*
+-
+-
D N G
*
) 1
-
S C Y T T S I J
(
2
) 1
-
S C Y T T S I J
(
2
) 1
-
S C Y T T S I J
(
2 m m 5 7 0
. x 2 x 1
*
I S T N E M P U Q E O D A R F H F M
/
I m m 5 7 0
. x 2 x 1
*
) 1
-
2 6 1 1 6 C E I
(
I S D C E
/
S N I m m 5 7 0
. x 2 x 1
*
) 1
-
2 6 1 1 6 C E I
(
I R E V E C E R S P G D
)
(
/
d r a y k c o d y b d e i l p p u s e r a l s e b a c d e k r a m
*
:
t 1 e o N l a n o i t p o e r a s t n e n o p m o c d e k r a m
:
t 2 e o N S N I 2-1 2-2 3. PART NAMES AND FUNCTIONS A LCD Panel 3.1 NCR-333 NAVTEX Receiver Front view USER Key MENU Key Buzzer CLR Key Clears input errors or cancel operations. Turns off the buzzer sound. DIMMER Key Adjusts the back light brightness of the LCD. Power Off Displays the screen assigned to this key. Refer to "6.3.3.5 USER KEY" about the setting of USER key. Displays the Main Menu. Turns the power off with pressing the PWR/CONT key and the DIM key at the same time. For further information, refer to Display indicators and 4. DISPLAY. A: Key Panel DISP Key Changes the screen, refer to 4. DISPLAY. Up, Down, Left, Right Key Moves the cursor, scrolls the display screen, and selects the item. ENTER Key Determines selection of an item and fixes a setup. Key Displays the small window. POWER/CONTRAST Key Turns the power ON. Adjusts the contrast of the LCD while power is turned on. 3-1 Protective cover To connect the antenna cable and the power cable, remove this cover. External equipments connector ECDIS, external buzzer, and MPD (Multi purpose display) cables are connected to the connector. Printer/Maintenance connector Serial printer and Maintenance PC cables are connected to the connector. Rear view 3-2 Rear panel (Terminal)
+
+
+
BK ANT Description Terminal Number and Name ANT +
1 ANT -
2 3 BK +
BK -
4 RXA 5 6 RXB GND ISO Connect the isolated signal ground cable for 7 TXA Connect an antenna cable. Connect the key lines leading from the transmitter. Connect the INS / External GPS cable for serial communication. serial communication. DATA IN 8 Connect the INS cable for serial communication with INS. TXB GND ISO Connect the isolated signal ground cable for
+
serial communication. Connect the power supply cable. The voltage range of the power supply between 10.8 and 35.0 VDC. This terminal is for electrical grounding to the vessel.
-
9 10 11 12 13 DATA OUT 12/24V DC IN GND 3-3
/ Station selection mode
: "AUTO MODE" is selected for coast station selection.
: "MANUAL MODE" is selected for coast station selection. Displays the sorting order of the message list. Refer to 6.2.7.2 Message list 1. The title of the current screen Save message This message has been saved. Unread message Unread message is stored. Check mark Refer to 6.2.7.2 Message list 1. NAVAREA No. The NAVAREA number is displayed with position data input. MSG LIST SORT:MSG TYPE ID FREQ LINES DATE TIME IA01 4209.5 15 04/06/09 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 04/06/09 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : KUSIRO MSG TYPE: ICE REPORTS KH13 518 5 04/06/09 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE KP16 518 9 04/06/09 01:34 STATION : KUSIRO DATA:321/342
/ Arrow mark marks are displayed on the top/ bottom line when the display screen is able to scroll upward/downward. Status bar Displays alarm, received message type and other status Receiving message The channel number is displayed while receiving message on the channel.
: 518kHz : 490kHz : 4209.5kHz NAVTEX Alarm ALR is displayed while NAVTEX alarm has occurred. Refer to 6.3.5.2 NAVTEX alarm. SAR message When a search and rescue (SAR) message is received with the buzzer sound. Alarm message When an alarm message (MSG TYP: A,B,L) is received with the buzzer sound. Unread message Unread messages exist. GPS position data
"GPS" is displayed while external GPS position data has input. SORT Display title Display indicators 3-4 4. DISPLAYS ID: ID number of the message text FREQ: Received channel frequency Title Bar The following items are displayed. 4.1 Displays Each time the DISP key is pressed, the screen is switched in the order below:
Message text -> Message list 1 -> Message list 2 -> Save message list -> Position/date -> ... After NCR-333 is started, a message text screen is displayed. 4.1.1 Message text screen Message text screen displays the text of the received message. This screen is displayed after NCR-333 is turned on, or after receiving a message. IA01 4209.5 18 31/10/06 12:34 123400 UTC JUNE 04 JAPAN NAVTEX N.W. NR 1260/2004 KEIHIN KO, TOKYO WEST PASSAGE. DAYTIME DAILY UNTIL 28 JUNE 2004
. AREA BOUNDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3N 139-45-16.6E 35-35-35.0N 139-44-15.1E, WGS-84 LINE: 10/ 18 LINES: The total line of the message text DATE: Received date DD/MM/YY TIME: Received time (UTC) Cursor position Scroll Bar LINE: 10 / 18
(a) (b)
(a) Cursor line position
(b) Total line The cursor position on the message text is indicated. 4-1 Message list 1 screen displays the list of the stored messages. This screen is displayed by indicating ID, FREQ, LINES, DATE (DD/MM/YY), TIME, STATION and Message Type of each message. Move the cursor up/down to select the message, and press the ENT key to display the message text. MSG LIST 1 SORT:MSG TYPE ID FREQ LINES DATE TIME IA01 4209.5 15 04/06/09 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 04/06/09 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : KUSIRO MSG TYPE: ICE REPORTS KH13 518 5 04/06/09 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:321/600 Cursor position DATA: 321 / 600
(a) (b)
(a) Cursor data position
(b) Total data Scroll bar The cursor position on message data is indicated. the total 4.1.2 Message list 1 screen 4.1.3 Message list 2 screen The message list 2 displays more message indexes than the message list 1, by indicating only ID, FREQ, LINES, DATE (DD/MM/YY), and TIME of each message. Move the cursor up/down to select the message, and press the ENT key to display the message text. MSG LIST 2 SORT:MSG TYPE ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 IB02 490 20 09/06/04 11:34 IC03 4209.5 12 09/06/04 10:34 ID04 518 5 09/06/04 10:34 IE05 518 30 09/06/04 10:34 IF06 518 12 09/06/04 09:34 IG07 490 15 09/06/04 09:34 IH08 490 11 09/06/04 09:34 II09 4209.5 10 09/06/04 09:34 KJ10 490 20 09/06/04 05:34 KK11 518 20 04/06/04 05:34 KL12 518 14 03/06/04 05:34 KH13 518 10 02/06/04 05:34 KN14 518 7 01/06/04 05:34 KO15 518 12 28/05/04 01:34 DATA:321/600 4-2 4.1.4 Save message list screen Save message list screen displays the list of the saved messages. This screen is displayed by indicating ID, FREQ, LINES, DATE (DD/MM/YY), TIME, STATION and Message Type of each message. Move the cursor up/down to select the message, and press the ENT key to display the saved message text. SAVE MSG SORT:MSG TYPE ID FREQ LINES DATE TIME IA01 4209.5 15 04/06/09 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 04/06/09 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : KUSIRO MSG TYPE: ICE REPORTS KH13 518 5 04/06/09 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA: 21/ 93 4.1.5 Position/date screen Position/date screen displays time, position, navigational data (SOG, COG, HDG, and ROT) when GPS data is valid. These parameters are not displayed when no GPS data. POS/TIME SORT:MSG TYPE Position 8959.999N 17959.999E TIME 23:59(UTC) DATE 31/12/04
(DD/MM/YY) Date / time SOG: 102.2KT COG: 359.9 HDT: 359.9 ROT:+127.1/MIN Navigational data 4-3 4.1.6 Setup screen To display Main menu, press the MENU key. Refer to 6.3 MAIN MENU for NCR-333 settings MAIN MENU 1.RX STATION_ 2.MESSAGE TYPE 3.DISPLAY 4.NAVTEX 5.MAINTENANCE 6.LANGUAGE: ENGLISH
[EXIT]
4-4 5. INSTALLATION 5.1 Installation 5.1.1 Selection of location The NAVTEX NCR-333 is designed so that it can be installed on either a desk, a wall, or the ceiling of the vessel. Select an installation location that satisfies the criteria listed on the followings. WARNING The installation location should be free from direct sunlight. The length of the grounding wire should be minimized. The installation location should also be: free from excessive heat, moisture, and vibration; in case of installation on the ceiling, free from the stagnant heat as well as the above, and; in case of installation near a window, free from salt water spray as well as the above. The distance from the magnetic compass should be at least 1 meter. The antenna cable, power cable, and grounding wire should be routed so as not to be in close proximity with transmitter, radar, and other sources of electronic noise, as well as the cables of these external units. 5.1.2 Mounting Mount the NCR-333 on a table top, a bulkhead, or a ceiling by using the mounting base. Opening the case is not necessary for mounting. And keep a clearance for the maintenance (refer to figure below). The mounting procedure is as follows;
-
Loose the two knobs to remove the mounting base.
- Mount the mounting base on the selected location.
-
Install the case on the mounting base by securing the two knobs. 4 -6.5 MOUNTING BASE (BOTTOM VIEW) Wall CLEARANCE
(Unit: mm) Space required for receiver installation 5-1 5-2 6. OPERATION 6.1 Menu Tree
[DSPL] Key POS/TIME SAVE MSG LIST T N E
[
MSG LIST 2 MSG LIST 1
[DSPL] key
(Power ON) MSG VIEW
[MENU] [CLR]
[MENU]
[ ], [ENT] Key
[ ], [ENT] Key
[ ], [ENT] Key
[ ], [ENT] Key
[ ], [CLR] Key
[ ], [CLR] Key
[ ], [CLR] Key
[MENU] Key
[ ], [CLR] Key MAIN MENU 1. RX STATION 2. MESSAGE TYPE 3. DISPLAY 4. NAVTEX 5. MAINTENANCE 6. LANGUAGE 1. RX MODE 2. OPERATING FREQ. 3. AUTO MODE SETTING 4. MANUAL MODE SETTING 1. MSG TYPE 1. CONTRAST 2. DIMMER
- MAXIMUM
- TYPICAL
- MINIMUM 3. BUZZER
- ALARM MSG
- RECEIVED MSG
- NAVTEX ALARM
- CLICK 4. LOCAL TIME 5. USER KEY SETTING 6. POS/TIME DISP. SET 1. CHARACTER SIZE 2. CER DISP.SETTING 3. MESSAGE SCROLL 4. MESSAGE SPEED 5. PRINTER PROPERTY
- DATA OUT
- DATA FORMAT
- BAUDRATE
- FLOW CONTROL
- PRINT DIRECTION 1. SELF DIAGNOSIS 2. NAVTEX ALARM 3. STATUS 4. PORT MONITOR 5. SOFTWARE VERSION
- PROGRAM
- LANGUAGE
- OPTION 1. STATION (AUTO) 1. STATION (MANUAL) 1. USER KEY 1. SELF DIAGNOSIS 2. LCD DIAGNOSIS 3. SELF DIAGNOSIS LOG 1. ALARM HISTORY 1. STATUS 1. PORT SELECTION 2. PORT LOG 1. MONITOR screen 1. LOG screen 6-1 6.2 Basic Operation 6.2.1 Turning ON the power Holding down the PWR/CONT key turns on the power, the starting screen appears, and then the self-diagnosis screen appears for 15 seconds later. After diagnosis is finished, message text screen appears. Caution Check the main power supply of a switchboard, and a cable connection of NCR-333 NAVTEX Receiver when the power cannot be turned on.
* NOW LOADING... NCR-333 NAVTEX RECEIVER VERSION 1.00 Starting screen Note
* SELF-DIAGNOSING... ROM CHECK: OK RAM CHECK: OK ANT CHECK: OK LOOP TEST:
- PRESS CLR KEY TO EXIT -
Self-diagnosis screen Self diagnosis can be canceled when the CLR key is pressed. A message text screen is displayed. 6.2.1.1 Start up (Normal) When all the results of self-diagnosis are 'OK', the result screen is displayed for about 5 seconds. And then the result screen changes to the latest message test screen automatically. IA01 4209.5 15 04/06/09 12:34 123400 UTC JUNE 04 JAPAN NAVTEX N.W. NR 1260/2004 KEIHIN KO, TOKYO WEST PASSAGE. DAYTIME DAILY UNTIL 28 JUNE 2004
. AREA BOUNDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3N 139-45-16.6E 35-35-35.0N 139-44-15.1E, WGS-84 LINE: 10/ 18
* SELF-DIAGNOSING... ROM CHECK: OK RAM CHECK: OK ANT CHECK: OK LOOP TEST:
- PRESS CLR KEY TO EXIT -
The latest message text screen Self-diagnosis screen 5 sec. later 6-2 6.2.1.2 Start up (Abnormal-1) When any result of self-diagnosis is NG, a message text screen does not change automatically. And the caution sentence as shown in the following figure is displayed on the self-diagnostic screen. In this case, press the CLR key. The latest message text screen appears. Caution When NG is in a result, be sure to carry out self diagnosis in the MAIN MENU after displaying the message text screen. Check the detailed result of the NG item. (Refer to 6.3.5.1 Self diagnosis)
* SELF-DIAGNOSING... ROM CHECK: OK RAM CHECK: OK ANT CHECK: OK LOOP TEST: NG PLEASE CARRY OUT SELF-DIAGNOSIS IN MAINTENANCE MENU.
[PRESS CLR KEY]
6.2.1.3 Start up (Abnormal-2) When the result of ROM CHECK is NG, the sub screen may be displayed as shown in the following figure. Be sure to select "[START]" on the sub screen. In this case, although NCR-333 operates, the screen cannot display in languages other than English.
[START]: The latest message text screen is displayed.
[INST]:
The software installation screen is displayed. When the installation screen is displayed, press and hold the PWR/CONT and DIM keys simultaneously until the power is turned off. Turn on the power, and restart the NCR-333. Caution Contact our service center or agents.
*LANGUAGE DAT.ERR*
* SELF-DIAGNOSING... ROM CHECK: NG RAM CHECK: OK STARTING NAVTEX?
OR ANT CHECK: OK RE-INSTALL
[START] [INST]
LOOP TEST: OK PLEASE CARRY OUT SELF-DIAGNOSIS IN MAINTENANCE MENU.
[PRESS CLR KEY]
[Option language data error]
*OPTION DAT.ERR*
STARTING NAVTEX?
OR RE-INSTALL
[START] [INST]
6-3 6.2.1.4 Start up (Abnorma-3) When the following screen is displayed, press and hold the PWR/CONT and DIM keys simultaneously until the power is turned off. Caution Contact our service center or agents. _ CHECK SUM _ _ COMPARING ERROR ! _ _ _ _ PLEASE RE-INSTALL _ _ THE PROGRAM. _ PLEASE RESTART AFTER SOFTWARE UPDATE PRESS AND HOLD [DIM]+[PWR]
6.2.2 Turning OFF the power Press and hold the PWR/CONT and DIM keys simultaneously for one second until the power is turned off. PWR CONT DIM 6-4 6.2.3 Backlight adjustment Brightness of display can be adjusted in 4 levels. The display is medium-intensity brightness at starting. To change the britness, press the DIM key. Maximum -> Medium -> Minimum -> Turn off the light -> Maximum ->... PWR CONT DIM Notes The brightness becomes the brightest in the following case;
- Failure alarm is occurred. (NAVTEX ALARM screen appears.)
- After reception of Navigational warnings message (Message type A)
- After reception of Meteorological warnings message (Message type B))
- After reception of Search and rescue information, and pirate attack warnings (Message type D)
- After reception of Navigational warnings (Additional to letter A) message (Message type L) 6.2.4 Contrast adjustment Contrast of view area can be adjusted in 13 levels. To change the contrast, press the PWR/CONT key. Contrast of View area is changed each time the PWR/CONT key is pressed. PWR CONT DIM 6-5 6.2.5 Alarm To stop the buzzer sound, press the CLR key. Similarly, to stop the external buzzer sound (option:
CGC-300A), press the CLR key. An alarm buzzer beeps in the following case;
- Failure alarm is occurred. (NAVTEX ALARM screen appears.)
- After reception of Search and rescue information, and pirate attack warnings (Message type D)
- After reception of Navigational warnings message (Message type A)
- After reception of Meteorological warnings message (Message type B))
- After reception of Navigational warnings (Additional to letter A) message (Message type L)
- After reception of other messages Refer to 6.3.3.3 Buzzer settings for a setup of alarm buzzer. 6.2.6 Screen switching To change the display screen, press the DISP key. DISP DISP DISP DISP DISP 6-6 IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E 6.2.7 Displaying the message 6.2.7.1 Message text After starting this equipment, the latest message text screen is displayed. Additionally, the latest message text screen is displayed just after reception of message while opening any screen. IA01 4209.5 18 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E LINE: 13/ 18
. AREA BOUDED BY 35-35-37.9N 139-47
-18.4E L: 9/ 18 The number on the left side of DATA shows the line number of the present cursor position. The right side number shows the total number of lines. IA01 4.2 31/12/05 JAPAN NAVTEX N.W. 35-35-35.0N 139-44-15.1E, WGS-84
. KEIHIN KO, TOKYO UNTIL 08 JULY 2006 DAYTIME DAILY EAST PASSAGE. Fig.6-1 Message text screen NR 1260/2005
(Character size: Medium)
(Character size: Normal)
(Character size: Large) LINE: 10/ 18 Notes The number of lines of the message text screen is changed as follows;
- Character size Normal:
- Character size Medium: The message text of 13 lines The message text of 10 lines
- Character size Large:
The message text of 16 lines is displayed at the maximum. Refer to 6.3.4.1 Character size setting about change of character size. 6-7 The message type and the message identification codes are as follows. The message identification codes displayed on upper-left side of the message text screen (lA01 in the above example) indicates the message type. These codes consist of four alpha-numeric characters which denote the coast station originating the message, the message type and the report number. The coast station that has transmitted the message is assigned by a character from A to Z. a. First character b. Second character This charactger identifies the type of message. Navigational warnings Meteorological warnings Ice reports Search and rescue information, and pirate attack warnings Meteorological forecasts Pilot service messages AIS LORAN-C messages SATNAV messages Other electronic navaid messages Navigational warnings (Additional to letter A)
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[H]
[J]
[K]
[L]
[V - Y] Special services
[Z]
QRU (No messages on hand) c. Third and fourth characters These characters denote the report number assigned to the message by the coast station where the message originated. The four-character identification code is stored in memory only when the message is received at a character error rate (CER) of 33 % or less. When an incoming message has the same identification code as one already stored message at CER of 4 % or less in memory (about 70 hours), it will not be displayed and stored. The above, however, does not apply to report number 00. For report number 00, the code is not held in memory and messages are displayed and stored each time they are received. a. Clear the unread mark The message text is displayed after the message has been received. Unread mark on the status bar shows unread messages has been received. Procedures 1) If the ENT key is pressed, the caution sentence disappears, and to read message. If all messages are read messages, the mark of status bar is cleared. this message changes Notes message.
- Unread messages can also be checked on the message list 1 or 2.
(Refer to 6.2.7.2 or 6.2.7.3) Be sure to clear the unread mark after reading a IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E 35-35-35.0N 139-44-15.1E, WGS-84 THE MSG WAS RECEIVED. PRESS[ENT]KEY LINE: 10/ 18 Caution sentence Unread mark 6-8 IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E 35-35-35.0N 139-44-15.1E, WGS-84
. LINE: 10/ 18 IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E
* SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
DATA OUT 35-35-35.0N 139-44-15.1E, WGS-84
. LINE: 10/ 18 b. Read the message Screen scrolling 1 The ( ) mark is displayed when the message text scroll downward (upward) is available. Procedures 1) To move the cursor up/down to the next line, press the key. (Cursor scrolls one by one in the message text.) 2) To scroll the next page of the message text downward (upward) when cursor is on the bottom
(top) line, press the () key. Screen scrolling 2 To skip to the next / previous message text screen is available. Procedures 1) To display to the previous / next screen, press the key. c. Read the other message Read the new message The new message can be displayed on the message text screen. 1) Press the * key. The sub screen appears. 2) Select the [NEXT MSG], and press the ENT key. 3) The new message is displayed. Procedures Notes
- [NEXT MSG] can be selected when there is new message. Read the old message The old message can be displayed on the message text screen. Procedures 1) Press the * key. The sub screen appears. 2) Select the [PREV. MSG], and press the ENT key. 3) The old message is displayed. Notes
- [PREV.MSG] can be selected when there is old message. 6-9
- The message that is not saved (the stored message) is automatically erased from the data memory about 70 hours after receiving.
- 50 messages of an average length of 500 characters can be saved in each channel. Procedures d. Save the message Save the message The currently open message can be saved. The saved message is permanently stored in the data memory. 1) Press the * key. The sub screen appears. 2) Select the [SAVE MSG], and press the ENT key. 3) ARE YOU SURE? is displayed. Select the [OK], and press the ENT key. (NOW SAVING... is displayes on the sub screen.) To return to the sub screen (SET UP), select
[CANCEL] and press the ENT key. 4) After message saving has been completed, press the ENT key or the CLR key. Notes The message cannot be saved When the saved message in the data memory is full, the sub screen is displayed as shown in the following figure, and the status bar shows which channel cannot be saved ( mark). Refer to c. Put a check mark (6.2.7.2 Message list 1) for explanation of the display of the status bar. Save again after deleting the message in save message list when unable to save a message. 6-10 IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E
* SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
DATA OUT 35-35-35.0N 139-44-15.1E, WGS-84
. LINE: 10/ 18
*SAVE MSG*
ARE YOU SURE?
[OK] [CANCEL]
*SAVE MSG*
SAVE OK
[OK] [CANCEL]
IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E
*SAVE MSG*
TO ADD A NEW MSG, DELETE A MSG IN THE SAVE LIST.
[OK]
35-35-35.0N 139-44-15.1E, WGS-84
. LINE: 10/ 18 RX1--OV e. Print the message Print the message The currently open message can be printed when having connected the external printer. Procedures 1) Press the * key. The sub screen appears. 2) Select the [PRINT OUT], and press the ENT key. 3) ARE YOU SURE? is displayed. Select the [OK], and press the ENT key. (NOW PRINTING... is displayed on the sub screen.) To return to the sub screen (SET UP), select
[CANCEL] and press the ENT key. 4) After message printing has been completed, press the ENT key or the CLR key. Notes IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E
* SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
DATA OUT 35-35-35.0N 139-44-15.1E, WGS-84
. LINE: 10/ 18
*PRINT OUT*
ARE YOU SURE?
[OK] [CANCEL]
*PRINT OUT*
PRINT OUT OK
[OK] [CANCEL]
- To stop printing, press the CLR key while printing.
- "[PRINT OUT]" cannot be selected when "DATA OUT" of "PRINTER PROPERTY" has set up "OFF". Refer to 6.3.4.5 External printer settings. The message cannot be printed When printing is unable, the sub screen is displayed as shown in the following figure. In this case, check the followings;
- The connection between IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E
* PRINTER ERROR *
35-34-58.9N 139-48-08.6E PLEASE CHECK THE
- PRINTER PROPERTY settings. (Refer 35-34-53.9N 139-48-03.1E PROPERTY 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E the external printer to 6.3.4.5 External printer settings) and NCR-333. PRINTER SETTING.
[OK]
- Confirm the external printer. (Paper out, etc...) 35-35-35.0N 139-44-15.1E, WGS-84
. LINE: 10/ 18 6-11
- SEL-DATA OUT: The message data is outputted
- SEL- DISP OUT: The message data is outputted LINE: 10/ 18 from a "DATA OUT" port. from a "DISP" port. f. Output the message from an external port The data of currently open message text can be output with connection the external equipment (ECDIS, MPD). 1) Press the * key. The sub screen appears. 2) Select the [DATA OUT], and press the ENT key. 3) Select the port which outputs message data. Procedures 4) ARE YOU SURE? is displayed. Select the [OK], and press the ENT key. (NOW OUTPUTTING... is displayed on the sub screen.) To return to the sub screen (SET UP), select
[CANCEL] and press the ENT key. 5) After message outputting has been completed, press the ENT key or the CLR key. Notes
- To stop outputting, press the CLR key while outputting. IA01 518 15 31/12/05 18:20 JAPAN NAVTEX N.W. NR 1260/2005 KEIHIN KO, TOKYO EAST PASSAGE. DAYTIME DAILY UNTIL 08 JULY 2006
. AREA BOUDED BY 35-35-37.9N 139-47-18.4E 35-34-58.9N 139-48-08.6E 35-34-53.9N 139-48-03.1E 35-35-02.0N 139-47-55.3E 35-35-32.3N 139-47-16.6E 35-35-35.0N 139-47-15.1E 35-33-37.9N 139-46-18.4E 35-33-58.9N 139-46-16.6E 35-33-32.3 N 139-45-16.6E
* SET UP *
[NEXT MSG]
[PREV. MSG]
[SAVE MSG]
[PRINT OUT]
DATA OUT 35-35-35.0N 139-44-15.1E, WGS-84
.
*DATA OUT*
[SEL-ECDIS OUT]
[SEL-DISP OUT]
[CANCEL]
*DATA OUT*
ARE YOU SURE?
[OK] [CANCEL]
*DATA OUT*
DATA OUT OK
[OK] [CANCEL]
6-12 The number on the left side of DATA shows the message number of the present cursor position. The right side number shows the total number of messages. MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438 6.2.7.2 Message list 1 Press the DISP key several times. The list of the currently stored messages appears. This list shows a receiving station and a message type for each message. MSG LIST1 SORT:DATE ID FREQ LINES DATE TIME IA01 4209.5 15 28/12/05 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 28/12/05 12:33 STATION : KOSHIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 28/12/05 12:32 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 27/12/05 18:30 STATION : KUSHIRO MSG TYPE: ICE REPORTS DATA:321/429
(Character size: Medium)
(Character size: Normal) Fig.6-2 Message list 1 Notes
- "LINES" and "TIME" are not displayed when character size has selected "LARGE".
(Same applies to the message list 2 and a save message list) MSG LIST1 ID FREQ DATE IA01 4.2 28/12/05 STN:YOKOHAMA MT :NAV WARNINGS KA04 518 28/12/05 STN:KUSHIRO MT :NAV WARNINGS IA07 490 28/12/05 STN:YOKOHAMA MT :NAV WARNINGS D:321/429
(Character size: Large) 6-13 MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438 a. Select a message Screen scrolling 1 The ( ) mark is displayed when the message list 1 scroll downward (upward) is available. Procedures 1) To meve the cursor up/down to the next line, press the key. (Cursor scrolls one by one in the message list 1.) 2) To scroll the next page of the message List 1 downward (upward) when cursor is on the bottom
(top) line, press the () key. 3) To read a message text, move the cursor to the message and press the ENT key. Screen scrolling 2 To skip to the next / previous message text screen is available. Procedures 1) To display to the previous / next screen, press the key. Notes Selecting "[PGUP]"or "[PGDN]" of the sub screen can also scroll the message list 1 screen similarly to the above procedures. To display the sub screen, press the * key.
- [PGDN]: Previous screen
- [PGUP]: Next screen 6-14 b. Sort messages To search message quickly, messages can be sorted. Procedures 1) Press the * key. The sub screen appears. 2) Select the LIST, and press the ENT key. The items of LIST appear. 3) The items of LIST are as follows;
SORT: The stored messages are displayed
- DATE: in the order of the date received in reverse
- STNS: in the order from the receiving station "A"
- AREA: in the order from the NAVAREA I
- MSGTYP: in the order from the message type A
- UNREAD: in the order of the date received in reverse
(unread messages) DISP: The messages displayed on the selected channel.
- ALL: All the messages are displayed.
- 518KHZ: Only 518 kHz messages are displayed.
- 490KHZ: Only 490 kHz messages are displayed.
- 4209.5KHZ: Only 4209.5 kHz messages are displayed. 4) Select "SORT" item, and then select DISP item. 5) Select the [OK], and press the ENT key. Sorting message starts. 6) After message sorting has been completed, press the ENT key or the CLR key. Rearrange the order of message conversely 1) Press the * key. The sub screen appears. 2) Select the REVERSE, and press the ENT key. 3) The order of the message currently displayed is Procedures rearranged conversely, and title of SORT is highlighted. MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST_ IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438
*LIST*
SORT:[DATE]
STNS AREA MSGTYP UNREAD
*LIST*
DISP:[ALL]
518KHZ 490KHZ 4209.5KHZ
[OK] [CANCEL]
NOW SETTING...
[OK] [CANCEL]
Highlight a title MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IB21 4209.5 15 12/05/05 11:10 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS IA33 518 10 13/05/05 22:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST KA67 490 20 04/06/09 02:15
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU PC01 490 12 04/06/09 10:25 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS IA01 4209.5 15 09/06/04 12:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438 6-15 c. Put a check mark (Save/print/output more than one message at the same time) Each checked message can be saved (printed or output) at the same time. Procedures 1) Press the * key. The sub screen appears. 2) Select the [CHECK], and press the ENT key. It means that the checked number exceeded the KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 RX1--OV number which can be saved in the memory. RX1--OV: The message of RX1 (518kHz) cannot be saved any more to the memory. MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST_ IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438 Check screen CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 0 Number of check marks CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 1 CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 3
*SET UP*
EXIT WITHOUT SETTING. ARE YOU SURE?
[OK] [CANCEL]
The sub screen is closed, and the message list 1 changes to the check screen. The check screen highlights the "CHECK" on the display title. The number of check marks is displayed on the status line. 3) Select the message for checking, and press the ENT key. The is displayed on a line with cursor. This mark means having checked the message. 4) Press the ENT key and put a check to other messages. In addition, when displayed, the following characters are RX2--OV: RX2 (490 kHz) RX3--OV: RX3 (4209.5 kHz) RX12-OV: RX1 and RX2 RX13-OV: RX1 and RX3 RX23-OV: RX2 and RX3 RX123OV: RX1, RX2 and RX3 In this case, messages still can be put a check, however, the messages cannot be printed or data can not be output. 5) Press the * key, to display the sub screen. Select "SAVE MENU", "PRINT MENU", or "PORT MENU" in the auxiliary screen. To save, print or output messages at the same time, refer to the procedure of d), e) and f). 6-16 If the CLR key is pressed on the sub screen, EXIT WITHOUT SETTING is displayed in the sub screen. If
"O.K." is selected, the check marks are removed and the display screen returns to the message list 1 screen.
- Select an item in the same procedure as d. Save d. Save messages Save one message The selected message can be saved. Procedures 1) Move cursor to the message to save. 2) Press the * key. The sub screen appears. 3) Select the SAVE MENU, and press the ENT key. 4) Select the [SELECT MSG] in the sub screen of SAVE MANU. Notes the message - 3) (p.6-10) after the above procedure. 5) The mark on the saved message line shows the message has saved completly. Save messages at the same time The messages which put the check mark can be saved at the same time. Procedures 1) Continued from Procedure 5) of "c. Put a check mark". 2) Select the SAVE MENU, and the ENT key. 3) Select the [CHECK MSG], and the ENT key. To clear to all check marks, select [RESET CHECK]
and press the ENT key. MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST_ IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438
*SAVE MENU*
[SELECT MSG]
[CHECK MSG]
[RESET CHECK]
[CANCEL]
To display to previous screen, select [CANCEL]. CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 3
*SAVE MENU*
[SELECT MSG]
[CHECK MSG]
[RESET CHECK]
[CANCEL]
MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438 6-17 Notes 4)
- Select an item in the same procedure as d. Save the message - 3) (p.6-10) after the above procedure. The mark on the saved message line shows the message has saved completly.
- Select an item in the same procedure as e. Print the message - 3) (p.6-11) after the above procedure. e. Print messages or the information on equipment Print one message The selected message can be printed. Procedures 1) Move cursor onto the message to print. 2) Press the * key. The sub screen appears. 3) Select the PRINT MENU, and the ENT key. 4) Select the [SELECT MSG] in the sub screen of PRINT MENU. Notes Print messages at the same time The messages which put the check mark can be printed at the same time. Procedures 1) Continued from Procedure 5) of "c. Put a check mark".
(The sub screen is displayed.) 2) Select the PRINT MENU, and the ENT key. 3) Select the [CHECK MSG], and the ENT key. To clear to all check marks, select [RESET CHECK]
and press the ENT key. Notes MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST_ IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438
*PRINT MENU*
[SELECT MSG]
[CHECK MSG]
[LIST]
[STATUS]
BATCH PRINT CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS SAVE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 3
*PRINT MENU*
[SELECT MSG]
[CHECK MSG]
[LIST]
[STATUS]
BATCH PRINT
*PRINT MENU
[LIST]
[STATUS]
BATCH PRINT
[RESET CHECK]
- Select an item in the same procedure as e. Print the message - 3) (p.6-11) after the above procedure.
[CANCEL]
To display to previous screen, select [CANCEL]. 6-18 Print the information on equipment The list of stored messages and the setting status can be printed. Procedures 1) Press the * key. The sub screen appears. 2) Select the [LIST] or [STATUS], and press the ENT key.
*PRINT MENU*
[SELECT MSG]
[CHECK MSG]
[LIST]
[STATUS]
BATCH PRINT
[LIST]:
[STATUS]: The setting status is printed. The contents of "6.3.5.3 Setting status of the NAVTEX The list of stored messages is printed. receiver" are printed. 3) Printing starts. After printing is completed, close the sub screen. Print messages at the same time The stored messages can be printed at the same time according to type, station and channel. Procedures 1) Press the * key. The sub screen appears. 2) Select the BATCH PRINT, and press the ENT key. The sub screen of BATCH PRINT MENU appears. 3) Select the following message type for printing.
*PRINT MENU*
[SELECT MSG]
[CHECK MSG]
[LIST]
[STATUS]
BATCH PRINT
*BATCH PRINT MENU*
[ALL STORED MSG]
[ALL SAVE MSG]
*BATCH PRINT MENU*
-- SELECT MSG --
CHANNEL:4209.5 STATION:A MSG TYP:L The "SELECT MSG" can select the message printing by the receiving channel, receiving station, message type.
[ALL STORED MSG]: All stored messages are printed. All saved messages are printed.
[ALL SAVE MSG]:
The messages of the conditions SELECT MSG:
selected from the following three items are printed. The receiving channel is selected from 518kHz, 490kHz, 4209.5kHz or ALL. The receiving station is selected from 'A' to 'Z', or 'ALL'. The message type is selected from A' to 'Z', or 'ALL'.
- CHANNEL:
- STATION:
- MSG TYP:
4) To start printing, select item and press the ENT key. ARE YOU SURE? is displayed on the sub screen, if the ENT key is pressed after selecting [ALL STORED MSG] or [ALL SAVE MSG]. When in SELECT MSG, ARE YOU SURE? is displayed on the sub screen, if the ENT key is pressed after selecting MSG TYP. Notes
- Select an item in the same procedure as e. Print the message - 3) (p.6-10) after the above procedure. 6-19 f. Output messages from an external port Output one message The external serial port output the selected messages data. Procedures 1) Move cursor to the message to output. 2) Press the * key. The sub screen appears. 3) Select the PORT MENU, and the ENT key. 4) Select the [SEL-DATA OUT] or [SEL-DISP OUT] in the sub screen of PORT MENU. MSG LIST1 SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA:329/438
*SET UP*
[REVERSE]
[CHECK]
SAVE MENU PRINT MENU PORT MENU
*PORT MENU*
[SEL-DATA OUT]
[SEL-DISP OUT]
[CHK-DATA OUT]
[CHK-DISP OUT]
[RESET CHECK]
Notes
- Select an item in the same procedure as f. Output the message from an external port - 3) (p.6-12) after the above rocedure. Output messages at the same time The messages with the check mark can be output at the same time. Procedures 1) Continued from Procedure 5) of "c. Put a check mark".
(The sub screen is displayed.) 2) Select the PORT MENU, and the ENT key. 3) Select the [CHK-DATA OUT] or CHK-DISP OUT, and the ENT key. To clear to all check marks, select [RESET CHECK]
and press the ENT key. CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 04/06/09 09:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 04/06/09 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA:329/438 3
*SET UP*
[REVERSE]
[CHECK]
SAVE MENU PRINT MENU PORT MENU
*PORT MENU*
[SEL-DATA OUT]
[SEL-DISP OUT]
[CHK-DATA OUT]
[CHK-DISP OUT]
- CHK-DATA OUT: Message data outgoing from
[RESET CHECK]
ECDIS or INS port.
- CHK-DISP OUT: Message data outgoing from DISP port. Notes
- Select an item in the same procedure as f. Output the message from an external port - 3) (p.6-12) after the above rocedure. 6-20 MSG LIST2 SORT:DATE VI ID FREQ LINES DATE TIME IA01 4209.5 15 27/06/05 12:34 IB02 490 20 27/06/05 11:34 IC03 4209.5 10 27/06/05 10:34 ID04 518 5 27/06/05 10:34 IE05 518 30 27/06/05 10:34 IF06 518 12 27/06/05 09:34 IG07 490 15 27/06/05 09:34 IH08 490 11 27/06/05 09:34 II09 4209.5 10 27/06/05 09:34 KJ10 490 20 27/06/05 05:34 KK11 518 20 26/06/05 05:34 KL12 518 14 25/06/05 05:34 KH13 518 10 24/06/05 05:34 KN14 518 7 21/06/05 05:34 KO15 518 12 28/05/05 01:34 DATA:321/429 6.2.7.3 Message list 2 Press the DISP key several times. The list of the currently stored messages appears. This list displays more messages on a screen than the message list 1 by not displaying STATION and MSG TYPE. MSG LIST2 ID FREQ DATE IA01 4.2 27/06/05 IB02 490 27/06/05 IC03 4.2 27/06/05 ID04 518 27/06/05 IE05 518 27/06/05 IF06 518 27/06/05 IG07 490 27/06/05 IH08 490 27/06/05 II09 4.2 27/06/05 D:321/429 MSG LIST2 SORT:DATE ID FREQ LINES DATE TIME IA01 4209.5 15 27/06/05 12:34 IB02 490 20 27/06/05 11:34 IC03 4209.5 10 27/06/05 10:34 ID04 518 5 27/06/05 10:34 IE05 518 30 27/06/05 10:34 IF06 518 12 27/06/05 09:34 IG07 490 15 27/06/05 09:34 IH08 490 11 27/06/05 09:34 II09 4209.5 10 27/06/05 09:34 KJ10 490 20 27/06/05 05:34 KK11 518 20 26/06/05 05:34 KL12 518 14 25/06/05 05:34 DATA:321/429
(Character size: Medium)
(Character size: Normal)
(Character size: Large) Fig.6-3 Message list 2 Notes
- Selecting of each message, scrolling, saving, and the printing method are carried out in the same procedure as the message list 1. Refer to the operation procedure of the message list 1.
- The message list 2 does not display mark which shows the saved message. When you confirm that the message was saved, display and check the message list 1 or the save message list. 6-21 6.2.7.4 Save message list Press the DISP key several times. The list of the messages that is currently saved appears. Only the list of messages saved by Message list 1 or Message list 2 is displayed. SAVE MSG SORT:DATE ID FREQ LINES DATE TIME IA01 4209.5 15 28/12/05 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 28/12/05 12:33 STATION : KUSHIRO MSG TYPE: NAVIGATIONAL WARNINGS IA07 490 20 28/12/05 12:32 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KC10 490 12 27/12/05 18:30 STATION : KUSHIRO MSG TYPE: ICE REPORTS KH13 518 5 27/12/05 18:29 STATION : KUSHIRO MSG TYPE: LORAN MESSAGE DATA: 21/ 37 Fig.6-4 Save message list Notes mark displayed on screen. is not this
- Selecting of each message, scrolling, saving, and the printing method are carried out in the same procedure as the message list 1. Refer to the operation procedure of the message list 1 about operation.
- The save message list does not display mark which shows the saved message. 6-22 a. Delete the saved message If the message is deleted from the save message list, mark displayed on the message list 1 will also be deleted. Caution The message is deleted after stored for 70 hours, and the message is deleted from the message list 1 and 2. Delete one message The selected message can be deleted. Procedures 1) Move cursor onto the message to delete. 2) Press the * key. The sub screen appears. 3) Select the DELETE MENU, and press the ENT key. 4) Select the [SELECT MSG] in the sub screen of DELETE MANU. 5) After message deleting has been completed, the selected message is deleted from the save message list and the mark is deleted from the message list 1. In addition, the message is deleted after stored for 70 hours, and the message is deleted from the message list 1 and 2. Delete messages at the same time The messages which put the check mark can be deleted at the same time. Procedures 1) Put check marks in the same procedure as "c.Put a check mark" of "6.2.6.2 Message list 1."
2) Press the * key. The sub screen appears. 3) Select the DELETE MENU, and press the ENT key. 5) Select the [CHECK MSG], and the ENT key. 4) If the ENT key is pressed after selecting [RESET CHECK], all check marks are cleared. 5) After message deleting has been completed, the selected message has deleted from the save message list and the mark is deleted from the message list 1. The message is deleted after stored for 70 hours, and the message is deleted from the message list 1 and 2. SAVE MSG SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST_ IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS DELETE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE DATA: 21438
*DELETE MENU*
[SELECT MSG]
[CHECK MSG]
[RESET CHECK]
[CANCEL]
To display to previous screen, select [CANCEL]. CHECK SORT:DATE XI ID FREQ LINES DATE TIME IA01 4209.5 15 09/06/04 12:34 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS KA04 518 10 09/06/04 10:34 STATION : KUSIRO
*SET UP*
MSG TYPE: NAVIGATIONAL WARNINGS LIST IA07 490 20 04/06/09 09:34
[REVERSE]
STATION : YOKOHAMA
[CHECK]
MSG TYPE: NAVIGATIONAL WARNINGS DELETE MENU KC10 490 12 04/06/09 05:34 PRINT MENU STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/04 05:34 CHECKING - PRESS [ENT] KEY FINISHED - PRESS [*] KEY DATA: 21/ 37 SAVE MSG SORT:DATE XI ID FREQ LINES DATE TIME KC10 490 12 09/06/05 05:34 STATION : YOKOHAMA MSG TYPE: ICE REPORTS KH13 518 5 09/06/05 05:34 STATION : KUSIRO MSG TYPE: LORAN MESSAGE IA11 518 10 08/06/05 22:20 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS IA13 518 14 08/06/05 18:20 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS IA42 518 28 07/06/05 22:21 STATION : YOKOHAMA MSG TYPE: NAVIGATIONAL WARNINGS DATA: 18/ 34 6-23 6.3 MAIN MEMU Main menu displays menu items for setting, and maintenance, etc. To display the Main menu, press the MENU key during operation. MAIN MENU 1.RX STATION_ 2.MESSAGE TYPE 3.DISPLAY 4.NAVTEX 5.MAINTENANCE 6.LANGUAGE: ENGLISH
[EXIT]
Fig.6-5 Main menu Procedures 1. Press the key to select the menu item. 2. When the ENT key or the key is pressed, the menu screen of selected item is displayed. Notes Previous screen is displayed when the CLR key is pressed. (Such as message text display or message list 1, etc). The outlines of menus are as follows;
1. RX STATION:
2. MESSAGE TYPE:
3. DISPLAY:
4. NAVTEX:
5. MAINTENANCE:
6. LANGUAGE:
[EXIT]:
Displays the menu for selecting receiving stations (See 6.3.1) Displays the menu for selecting message types (See 6.3.2) Displays the menu for setting the display unit. (See 6.3.3) Displays the menu for setting the NAVTEX receiver. (See 6.3.4) Displays the maintenance menu. (See 6.3.5) Selects the menu display language. (See 6.3.6) Return to the previous screen (Such as message text display or message list 1, etc.) 6-24 6.3.1 RX STATION screen To display RX STATION menu screen, select 1. RX STATION. Procedures 1. Press the key to select the menu item. 2. When ENT key or key is pressed, the menu screen of selected item is displayed. RX STATION 1.RX MDOE: AUTO 2.OPERATING FREQ.:RX1/RX2/RX3 3.AUTO MODE SETTING 4.MANUAL MODE SETTING Fig.6-6 RX STATION menu screen
- When cursor is on the item 1 and 2, cursor moves to the right side of ":"
- When cursor is on the item 3 and 4, the menu screen of item 3 and 4 appears. Notes The outlines of Menus are as follows;
1. RX MODE:
2. OPERATING FREQ.:
3. AUTO MODE SETTING:
- To return to the MAIN MENU screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":" of item 1 and 2, cursor returns on the item 1 and 2. (1.RX MODE, 2.OPERATING FREQ.) Select AUTO or MANUAL as the receiving station selection mothod.
(See 6.3.1.1)
(See 6.3.1.2) 4. MANUAL MODE SETTING: Displays the menu screen for selecting the receiving station regardless of Select receiving channels. Displays the menu screen by automatically selecting the receiving station in each NAVAREA (Navigation area).
(See 6.3.1.3) NAVAREA.
(See 6.3.1.4) 6-25 6.3.1.1 Receiving mode setting (RX MODE) The automatic select mode and the manual select mode for RX station :
- AUTO: Automatic select mode When normal GPS position data is inputted, the position and NAVAREA of a ship are automatically specified, and the message of the receiving station in the NAVAREA is received.
(The mark is displayed on the status bar.) Notes AUTO can be selected only when the GPS data is inputted.
- MANUAL: Manual select mode Notes Regardless of the NAVAREA, messages are received according to the station selection settings of each channel. The information of code number 00 is always received, displayed and stored automatically regardless of the setting.
(Refer to 6.2.7.1 Message text.) 6.3.1.2 Receiving channel setting (OPERATING FREQ.) A receiving channel selection Press the key and select the following items;
- RX1 (518 kHz)/ RX2 (490 kHz)/ RX3 (4209.5 kHz)
- RX1 / RX2
- RX1 / RX3 RX1 (518kHz) is always selected. 6-26 SELECT ALL STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) 6.3.1.3 Automatic receiving station selection (AUTO MODE SETTING) To display AUTO MODE SETTING screen, select 3.AUTO MODE SETTING from RX STATION menu (6.3.1). Select the receiving station of each channel for every NAVAREA. The items of the receiving station selection screen (auto mode) are as follows;
A:JAYAPURA N:GUANGZHOU B:AMBON O:FUZHOU C:SINGAPORE P:MEILUNG D:MAKASSAR Q:SHANGHAI E:JAKARTA R:DALIAN F:BANGKOK RADIO S:SANDAKAN G:NAHA T:MIRI H:MOJI U:PENANG I:YOKOHAMA V:CHUKPYON/GUAM J:OTARU W:PYONSAN K:KUSHIRO/DANANG X:HO CHI MINH L:HONG KONG Y:
M:SANYA Z:
Fig.6-7 The receiving station selection screen (Auto mode setting)
- NAVAREA:
- FREQUENCY:
- SELECT ALL:
Select the NAVAREA (I - XVI). Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)). Select all the stations from A to Z.
: A message is received.
- Receiving station A Z: Select receiving stations from A to Z
: A message is not received. Notes
- When GPS data is inputted, the receiving station in your NAVAREA is automatically displayed in the selection screen. Otherwise, the stations in NAVAREA1 are displayed first. 6-27 a. Select receiving stations Select the receiving station of each channel for every NAVAREA. All stations of initial setting are A message is received:
Procudure 1) Select NAVAREA, and press the ENT key. Cursor moves to the right side of ":" (on a number). 2) Press the key and select the number of NAVAREA. And then, press the ENT key. The cursor moves to the lower line (on the FREQUENCY). 3) Select FREQUENCY, and press the ENT key. Cursor moves to the right side of ":" (on the RX1). 4) Press the key and select a channel. RX1 (518K): 518 kHz RX2 (490K): 490 kHz RX3 (4209.5K): 4209.5 kHz Selection of NAVAREA STATION(AUTO) NAVAREA__:
FREQUENCY:RX1(518K) SELECT ALL A:BUSHEHR N B:HAMALA O C: P D: Q E: R ENT STATION(AUTO) NAVAREA :
aa, aa FREQUENCY:RX1(518K) SELECT ALL A:JAYAPURA N B:AMBON O C:SINGAPORE P D:MAKASSAR Q E:JAKARTA R ENT STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) SELECT ALL A:JAYAPURA N B:AMBON O C:SINGAPORE P D:MAKASSAR Q E:JAKARTA R 5) Press the key to select a receiving station for setting.
- Pressing the ENT key switches alternately between and .
- If the SELSCT ALL is , all station (A-Z) settings changes to . ENT SELECT ALL SELECT ALL STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) A:JAYAPURA N B:AMBON O C:SINGAPORE P D:MAKASSAR Q E:JAKARTA R A:JAYAPURA N B:AMBON O C:SINGAPORE P D:MAKASSAR Q E:JAKARTA R A:JAYAPURA N B:AMBON O C:SINGAPORE P D:MAKASSAR Q E:JAKARTA R A:JAYAPURA N B:AMBON O C:SINGAPORE P D:MAKASSAR Q E:JAKARTA R STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K)
(b) Selection of each station
(a) Selection of all stations SELECT ALL SELECT ALL ENT 6-28 b. Cancel settings When the CLR/ MENU/ DISP/ USER key is pressed while setting up a. Select receiving stations, the information screen (the sub screen) as shown in the following figure is displayed. Select OK or CANCEL. OK:
Canceling the receiving station settings, the screen changes according to the pressed key. CANCEL: The information screen is closed. Continu the receiving station settings. SAVING. SELECT ALL
*STNS(AUTO) SET*
EXIT WITHOUT ARE YOU SURE?
(SAVE:PRESS*KEY)
[OK] [CANCEL]
STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) A:JAYAPURA N:GUANGZHOU B:AMBON O:FUZHOU C:SINGAPORE P:MEILUNG D:MAKASSAR Q:SHANGHAI E:JAKARTA R:DALIAN F:BANGKOK RADIO S:SANDAKAN G:NAHA T:MIRI H:MOJI U:PENANG I:YOKOHAMA V:CHUKPYON/GUAM J:OTARU W:PYONSAN K:KUSHIRO/DANANG X:HO CHI MINH L:HONG KONG Y:
M:SANYA Z:
c. Set up the next channel (or NAVAREA) After a setup of a channel (or NAVAREA) finishes, the next channel (or NAVAREA) can be set up continuously. 1) Press the key for selecting FREQUENCY (or NAVAREA), and press the ENT key. Cursor moves to the right side of ":"
2) Press the key and select the number of NAVAREA. And then, press the ENT key. 3) Select a receiving station in the same procedures as a. Select receiving stations. Procedures 6-29 d. Save (or Clear) settings Save (or clear) the settings on the sub screen after setting up. Procedures 1) Press the * key. The sub screen appears. Cursor is on the [CLEAR]. 2) Press the key and select the following items. 3) Save settings Select the [OK], and press the ENT key. STATION(AUTO) NAVAREA :
FREQUENCY:RX1(518K) SELECT ALL A:JAYAPURA N:GUANGZHOU B:AMBON O:FUZHOU
*STNS(AUTO) SET*
C:SINGAPORE P:MEILUNG D:MAKASSAR Q:SHANGHAI SAVE CHANGES TO E:JAKARTA R:DALIAN THIS SETTING?
F:BANGKOK RADIO S:SANDAKAN
[CLEAR]
G:NAHA T:MIRI
[ALL CLEAR]
H:MOJI U:PENANG
[OK] [CANCEL]
I:YOKOHAMA V:CHUKPYON/GUAM J:OTARU W:PYONSAN K:KUSHIRO/DANANG X:HO CHI MINH L:HONG KONG Y:
M:SANYA Z:
Clear only settings of the screen that is currently open Select the [CLEAR], and press the ENT key. The receiving station settings of the screen that is currently open are restored to its former state, and the cursor returns to NAVAREA. Clear all settings Select the [ALL CLEAR], and press the ENT key. All the receiving station settings are restored to its former state, and the cursor returns to NAVAREA. Continue setting up Select the [CANCEL], and press the ENT key. This sub screen is closed. 4) To start save precess, select [OK].
*STNS(AUTO) SET*
SAVE CHANGES TO THIS SETTING?
[CLEAR]
[ALL CLEAR]
[OK] [CANCEL]
Then, SAVE OK is displayed on the sub screen. Press the ENT or CLR key. RX STATION menu screen appears. ENT
*STNS(AUTO) SET*
NOW SAVING...
[OK] [CANCEL]
Saving is completed
*STNS(AUTO) SET*
SAVE OK
[OK] [CANCEL]
6-30 SELECT ALL STATION(MANUAL) FREQUENCY:RX1(518K) 6.3.1.4 Manual receiving station selection (MANUAL MODE SETTING) To display MANUAL MODE SETTING screen, select 4.MANUAL MODE SETTING from RX STATION menu
(6.3.5). Select the receiving station of each channel. There is no setup of NAVAREA. The items of the receiving station selection screen (manual mode) are as follows;
A: N:
B: O:
C: P:
D: Q:
E: R:
F: S:
G: T:
H: U:
I: V:
J: W:
K: X:
L: Y:
M: Z:
Fig.6-8 The receiving station selection screen (Manual mode setting)
- FREQUENCY:
- SELECT ALL:
Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)). Select all the stations from A to Z.
: A message is received.
: A message is not received.
- Receiving station A Z: Select receiving stations from A to Z Notes When this screen is displayed, the receiving station of RX1 is displayed first. a. Select receiving stations Start with selection of "FREQUENCY". Carry out the procedure from section 3) to 5) of p.6-28 a. Select receiving stations b. Cancel settings Carry out b. Cancel settings of p.6-29. c. Set up the next channel (or NAVAREA) Carry out the procedure from section 1) to 3) of p.6-29 c. Set up the next channel (or NAVAREA). d. Save (or Clear) settings Carry out the procedure from section 1) to 4) of p.6-30 d. Save (or Clear) settings. 6-31 SELECT ALL MSG TYPE FREQUENCY:RX1(518K) 6.3.2 Receiving message type settings (MESSAGE TYPE SETTING) To display MESSAGE TYPE SETTING menu screen, select 2. MESSAGE TYPE SETTING. The items of the receiving message type selection screen are as follows;
A:NAV WARNINGS N:[SPARE]
B:MET WARNINGS O:[SPARE]
C:ICE REPORT P:[SPARE]
D:SERCH & RESCUE Q:[SPARE]
E:MET FORECAST R:[SPARE]
F:PILOT SERVICE S:[SPARE]
G:DECCA T:[SPARE]
H:LORAN U:[SPARE]
I:[SPARE] V:SPECIAL J:SATNAV W:SPECIAL K:OTHER NAVAID X:SPECIAL L:NAV WARNINGS Y:SPECIAL M:[SPARE] Z:NO MESSAGES Fig.6-9 MESSAGE TYPE menu screen
- FREQUENCY:
- SELECT ALL:
Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)). Select all the messages from A to Z.
: A message is received.
- Receiving message A Z : Select receiving message from A to Z
: A message is not received. Notes Navigational warning [A], Meteorological warning [B], Search and rescue information/piracy and armed robbery [D], Navigational warning (additional) [L] are obliged to receive a message. These message types setting cannot be changed. a. Select receiving message types Start with selection of "FREQUENCY". Carry out the procedure from section 3) to 5) of p.6-28 a. Select receiving stations. b. Cancel settings Carry out b. Cancel settings of p.6-29. c. Save (ro Clear) settings Carry out the procedure from section 1) to 4) of p.6-30 d. Save (or Clear) settings. 6-32 6.3.3 DISPLAY setting menu (DISPLAY SET) To display DISPLAY SET menu screen, select 3.DISPLAY from MAIN MENU (6.3). Display form, a buzzer, etc. can be set up on this screen. Procedures 1. Press the key to select the menu item. 2. When ENT key or key is pressed, the menu screen of selected item is displayed. DISPLAY SET 1.CONTRAST : 10 2.DIMMER
- MAXIMUM : 10
- TYPICAL : 6
- MINIMUM : 2 3.BUZZER : ON
- ALARM MSG : ON
(FOR MESSAGE TYPE:A,B,L)
- RECEIVED MSG : ON
- NAVTEX ALARM : ON
- CLICK : ON 4.LOCAL TIME : ON
(TIME DIFFERENCE): -11:59 5.USER KEY SETTING 6.POS/TIME DISP.SET(1):POS
(2):TIME/NAV Fig.6-10 DISPLAY SET menu screen
- When cursor is on the item 1-4 and 6, cursor moves to the right side of ":"
- When cursor is on the item 5, the menu screen of item 5 appears. Notes
- To return to the MAIN MENU screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":" of item 1-4 and 6, cursor returns on the item 1-4 and 6. (1.CONTRAST, 2. DIMMER, ....) The outlines of menus are as follows;
1. CONTRAST:
2. DIMMER:
3. BUZZER:
4. LOCAL TIME:
5. USER KEY SETTING: Assign the often used function for the USER key 6. POS/TIME DISP.SET: Set up the display of the POSITION/TIME screen. Adjust the contrast of this display. Set up the brightness level of this display. Select buzzer ON/OFF. Input local time.
(See 6.3.3.1)
(See 6.3.3.2)
(See 6.3.3.3)
(See 6.3.3.4)
(See 6.3.3.5)
(See 6.3.3.6) 6-33 1.CONTRAST : 10 6.3.3.1 Contrast adjustment (CONTRAST) When 1. CONTRAST is selected, CONTRAST is ready to be entered. To adjust the contrast, press the key, and then press the ENT key. The adjustment of the contrast
- 1 is the darkest.
- 13 is the lightest. The initial setting is 7. 6.3.3.2 Brightness settings (DIMMER) Brightness can be changed into four levels (Maximum, Typical, Minimum and off) by pressing the DIM key. These brightness levels are set up in this item. Select 2.DIMMER, and press the ENT key. Cursor moves to the right side of ":". Number and brightness is changed when the key is pressed, and then press the ENT key. Press the ENT key after setting up to "MINIMUM". All setting values are saved. Notes MAXIMUM should enter the largest numerical value and MINIMUM should enter the smallest 2.DIMMER
- MAXIMUM : 10
- TYPICAL : 8
- MINIMUM : 4 numerical value. 6.3.3.3 Buzzer settings (BUZZER) When 3. BUZZER is selected, each buzzer functions can be set enable (ON) or disable (OFF) as followings. Press the key and select the ON or OFF. Press the ENT key after setting up to "CLICK". All buzzer settings are saved. 3.BUZZER : ON
- ALARM MSG : ON
(FOR MESSAGE TYPE:A,B,L)
- RECEIVED MSG : ON
- NAVTEX ALARM : ON
- CLICK : ON A buzzer is sounded. A buzzer is not sounded. ON:
OFF:
BUZZER:
- ALARM MSG:
- RECEIVED MSG:
- NAVTEX ALARM:
- CLICK:
OFF: All buzzer functions are disabled. ON: Each buzzer function as shown below can be enabled. When a message (A, B and L) is received. When a message (other than A, B and L) is received. When a failure alarm occurs. When a key is pressed. When search and rescue message (D) is received, buzzer sounds. The SAR buzzer sound can not be Caution set to OFF (disable). 6-34 6.3.3.4 Time Difference setting (LOCAL TIME)
"LOCAL TIME" can set up time difference to UTC. When ON is selected, (LOCAL) is displayed in the POSITION/TIME screen. The time of the POSITION/TIME screen displays the numerical value which added time difference to UTC. When OFF is selected, (UTC) is displayed. Procudure 1. Select 4.LOCAL TIME, and press the ENT key. Cursor moves to the right side of ":". 2. Press the key and select the ON or OFF, and then press the ENT key. 4.LOCAL TIME : ON
(TIME DIFFERENCE): +09:00 The cursor moves to the lower line. 3. Press the key and select + (add) or - (sub). Next, input the numerical value within the range of 00:00 to 12:00. ( -12:00 to +12:00) To save the "LOCAL TIME" settings, cursor should press the ENT key on the rightmost position
(minute). Notes The setup time difference is displayed on the POSITION/TIME screen. 6-35 USER KEY SETTING 1.USER KEY: P
-----------------------------------
D:POSITION/TIME E:RX STATION SETTING MENU F:AUTO MODE SETTING G:MANUAL MODE SETTING H:MESSAGE TYPE SETTING MENU I:DISPLAY SETTING MENU J:USER KEY SETTING K:NAVTEX SETTING MENU L:MAINTENANCE MENU M:SELF DIAGNOSIS N:NAVTEX ALARM O:STATUS 6.3.3.5 Assigning to the USER key (USER KEY SETTING) The USER key can be assigned to the often used function (screen). Select 5. USER KEY SETTING, and press the ENT key. USER KEY SETTING screen appears. Press the key and select from A to Z, and then press the ENT key. USER KEY setting is saved. mark is displayed on the bottom line when the USER KEY SETTING screen is able to scroll downward. mark is displayed on the top line when the USER KEY SETTING screen is able to scroll upward. To display DISPLAY menu screen, press the CLR. Refer to the following table about selectable items;
Fig.6-11 USER KEY SETTING screen Title MESSAGE LIST1 MESSAGE LIST2 SAVE MESSAGE LIST POSITION/ITME RX STATION SETTING MENU AUTO MODE SETTING MANUAL MODE SETTING MESSAGE TYPE SETTING MENU DISPLAY SETTING MENU USER KEY SETTING NAVTEX SETTING MENU MAINTENANCE MENU SELF DIAGNOSIS NAVTEX ALARM STATUS PORT MONITOR PRINT NON USE is Explanation MESSAGE LIST 1 screen is displayed. MESSAGE LIST 2 screen is displayed. SAVE MESSAGE LIST screen is displayed. POSITION/TIME screen is displayed. RX STATION menu screen is displayed. AUTO MODE SETTING screen (RX STATION menu) displayed. MAMUAL MODE SETTING screen (RX STATION menu) is displayed. MESSAGE TYPE SETTING screen is displayed. DISPLAY menu screen is displayed. This screen (SER KEY SETTING) is displayed. NAVTEX menu screen is displayed. MAINTENANCE menu screen is displayed. SELF DIAGNOSIS screen (MAINTENANCE menu) is displayed. NAVTEX ALARM screen (MAINTENANCE menu) is displayed. STATUS screen (MAINTENANCE menu) is displayed. PORT MONITOR screen (MAINTENANCE menu) is displayed. Printing is started if the USER key is pressed on the screen which can print the external printer. Printing is stopped if the CLR key is pressed during printing. The USER key cannot be used. A B C D E F G H I J K L M N O P Y Z 6-36 6.POS/TIME DISP.SET(1):POS
(2):TIME/NAV 6.3.3.6 POSITION/TIME screen settings (POS/TIME DISP.SET)
"POS/TIME DISP.SET" can set up the item displayed on the POSITION/TIME screen. POSITION/TIME screen can be displayed selecting items of position (POS), time (TIME), and navigational information (NAV). Procudure 1. Select 6.POS/TIME DISP. SET(1), and press the ENT key. Cursor moves to the right side of ":". 2. Press the key and select the POS, TIME or OFF, and then press the ENT key. This item is displayed on the upside of the POSITION/TIME screen. Notes The setup time difference is displayed on the POSITION/TIME screen. When you have selected "OFF", cursor ends the setup of this item, without moving to the lower line (2). 3. The cursor moves to the lower line (2). Press the key, and then press the ENT key. This item is displayed on the downside of the POSITION/TIME screen.
(1): POS, The selectable items of (2) are as follows. OFF, TIME, TIME/NAV
(1): TIME, The selectable items of (2) are as follows. OFF, POS, POS/TIME
- When OFF is selected, only the item of (1) is displayed on POSITION/TIME screen.
- When TIME (or POS) is selected, this item is displayed on the downside of the POSITION/TIME screen.
- When TIME/NAV (or POS/NAV) is selected, time is displayed on the left side, and navigational information is displayed on the right side of the POSITION/TIME screen. Ex) The following figure is an example when selecting POS and TIME/NAV.
(1): POS
(2): TIME/NAV The item of (1) POS/TIME XI 8959.999 N 13959.999 E The item of (2) TIME 23:59(UTC) DATA 31/12/05
(DD/MM/YY) SOG: 102.2KT COG: 359.9 HDT: 359.9 ROT:+127.1/MIN 6-37 6.3.4 NAVTEXsetting menu (NAVTEX) To display NAVTEX SET menu screen, select 4.NAVTEX from MAIN MENU (6.3). Character size, printer setting, etc. can be set up on this screen. NAVTEX SET 1.CHARACTER SIZE : NORMAL 2.CER DISP.SETTING : OFF
(CER:CHARACTER ERROR RATE) 3.MESSAGE SCROLL : ON 4.MESSAGE SPEED : FAST 5.PRINTER PROPERTY
- DATA OUT : MANUAL
- DATA FORMAT : ON
- BAUDRATE : 38.4KBPS
- FLOW CONTROL : NONE
- PRINT DIRECTION : UPRIGHT Fig.6-12 NAVTEX SET menu screen Procedures 1. Press the key to select the menu item. 2. When ENT key or key is pressed, the menu screen of selected item is displayed.
- To return to the MAIN MENU menu screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":", cursor returns on the item.
(1.CHARACTER SIZE, 2. CER DISP.SETTING, ....) Notes The outlines of menus are as follows;
Select the character size
(See 6.3.4.1) 1. CHARACTER SIZE:
(See 6.3.4.2) 2. CER DISP.SETTING: Add CER to the end of message
(See 6.3.4.3) 3. MESSAGE SCROLL: Set up the message scroll function 4. MESSAGE SPEED:
(See 6.3.4.4) 5. PRINTER PROPERTY: Set up the external printer connection (See 6.3.4.5) Select the scrolling speed 6-38 6.3.4.1 Character size setting (CHARACTER SIZE) Displayed character can be changed into three sizes. Select 1.CHARACTER SIZE, and press the ENT key. Cursor moves to the right side of ":". Press the key, and then press the ENT key. If the ENT key is pressed, the selected character size is saved, and the displayed character is changed. The initial setting is NORMAL. 1.CHARACTER SIZE : NORMAL NORMAL:
MEDIUM:
LARGE:
The normal character size: 13x9 dots The medium character size: 16x9 dots The large character size: 20x16 dots 6.3.4.2 CER setting (CER DISP.SETTING) A message text can add CER(*1) to the end of message. Select 2.CER DISP.SETTING, and press the ENT key. Cursor moves to the right side of ":". Press the key and select the ON or OFF, and then press the ENT key. This setting is saved The initial setting is OFF. 2.CER DISP.SETTING : ON
(CER:CHARACTER ERROR RATE) ON:
OFF:
CER is displayed on the end of message. CER is not displayed.
(*1): Character Error Rate
(When CER DISP.SETTING is set ON) (When CER DISP.SETTING is set OFF) IA01 4209.5 15 04/06/09 12:34 123400 UTC JUNE 04 JAPAN NAVTEX N.W. NR 1260/2004 KEIHIN KO, TOKYO WEST PASSAGE. DAYTIME DAILY UNTIL 28 JUNE 2004 35-35-02.0N 139-47-55.3E,WGS-84
(END OF MESSAGE CER : 3.5%) LINE: 18/ 18 IA01 4209.5 15 04/06/09 12:34 123400 UTC JUNE 04 JAPAN NAVTEX N.W. NR 1260/2004 KEIHIN KO, TOKYO WEST PASSAGE. DAYTIME DAILY UNTIL 28 JUNE 2004 35-35-02.0N 139-47-55.3E,WGS-84
(END OF MESSAGE) LINE: 18/ 18 6-39 6.3.4.3 Automatic scrolling setting (MESSAGE SCROLL) When character size has selected LARGE, a message text can be automatically scrolled on a screen. Select 3.MESSAGE SCROLL, and press the ENT key. Cursor moves to the right side of ":". Press the key and select the ON or OFF, and then press the ENT key. This setting is saved The initial setting is ON 3.MESSAGE SCROLL : ON ON: A message text scroll. OFF: A message text does not scroll. 6.3.4.4 Scrolling speed adjustment (MESSAGE SPEED) The speed of automatic scrolling can be changed into three levels. Select 4.MESSAGE SPEED, and press the ENT key. Cursor moves to the right side of ":". Press the key and select the ON or OFF, and then press the ENT key. This setting is saved The initial setting is NORMAL. 4.MESSAGE SPEED : NORMAL SLOW:
NORMAL:
FAST:
A character scrolls at the slowest speed. A character scrolls at the normal speed. A character scrolls at the fastest speed. 6-40 6.3.4.5 External printer settings (PRINTER PROPERTY) Serial port (RS-232C: MAINTENANCE/PRINTER) conditions can be set up when connecting external printer. Select 5.PRINTER PROPERTY, and press the ENT key. Cursor moves to the right side of ":". After setting up to "FLOW CONTROL", press the ENT key. All settings are saved. The explanations of each item are as follows;
(1) DATA OUT 5.PRINTER PROPERTY
- DATA OUT : MANUAL
- DATA FORMAT : ON
- BAUDRATE : 4800BPS
- FLOW CONTROL : NONE
- PRINT DIRECTION : UPRIGHT The data output method for printer is set up. Press the key and select the following items. If the ENT key is pressed, Cursor moves to the lower line. OFF:
AUTO:
MANUAL:
The message is not outputted to the external printer. After receiving a message, the data is automatically outputted to the external printer. The data of the selected message is outputted to the external printer.
(2) DATA FORMAT The output data format is set up. Press the key and select the following items. If the ENT key is pressed, Cursor moves to the lower line. ON:
OFF:
The header and footer are added to a message text. Only a message text is printed.
(The example of printing
---- 518kHz NAVTEX MESSAGE ----
ZCZC IA01 TEST MESSAGE NNNN
--- END OF MESSAGE CER = 0.0% ---
(3) BAUDRATE Header Footer Baudrate (bits/sec) is set up. Press the key and select the following items. If the ENT key is pressed, Cursor moves to the lower line. Baudrate can be selected from "4800", "9600", and "38.4K." BPS.
(4) FLOW CONTROL The flow control is set up. Press the key and select the following items. If the ENT key is pressed, Cursor moves to the lower line. NONE:
HARD:
The flow control is not performed. The flow control is performed.
(5) PRINT DIRECTION Print direction is set up. Press the key and select the following items. If the ENT key is pressed, all settings are saved. The initial settings are as follows. Set up as follows when DPU-414 is connected. UPRIGHT: Upright printing INVERT:
Inverted printing DATA OUT:
DATA FORMAT:
BAUD RATE:
FLOW CONTROL:
PRINT DIRECTION:
MANUAL ON 4800BPS NONE UPRIGHT 6-41 6.3.5 MAINTENANCE menu (MAINTENANCE) To display MAINTENANCE menu screen, select 5.MAINTENANCE from MAIN MENU (6.3). Users can check current status of the system by the menu. Procedures 1. Press the key to select the menu item. 2. When ENT key or key is pressed, the menu screen of selected item is displayed. MANINTENANCE 1.SELF DIAGNOSIS 2.NAVTEX ALARM 3.STATUS 4.PORT MONITOR 5.SOFTWARE VERSION
- PROGRAM : 12.34
- LANGUAGE: 21A
- OPTION : ---
Fig.6-13 MAINTENANCE menu screen
- When cursor is on the item 1-4, cursor moves to the right side of ":"
- When cursor is on the item 5, the menu screen of item 5 appears.
- To return to the MAIN MENU screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":", cursor returns on the item.
(1.CHARACTER SIZE, 2. CER DISP.SETTING, ....) Notes The outlines of menus are as follows;
1. SELF DIAGNOSIS:
2. NAVTEX ALARM:
3. STATUS:
4. PORT MONITOR:
5. SOFTWARE VERSION:Display versions of software installed in NCR-333. Perform self diagnosis test. Display alarm logs for disorders. Display current status of NAVTEX setting. Display serial data of each port.
(See 6.3.4.1)
(See 6.3.4.2)
(See 6.3.4.3)
(See 6.3.4.4)
(See 6.3.4.5) 6-42 6.3.5.1 Self diagnosis (SELF DIAGNOSIS) NCR-333 can be self-diagnosed. Select 1.SELF DIAGNOSIS, and press the ENT key. SELF DIAGNOSIS screen appears. SELF DIAGNOSIS 1.SELF DIAGNOSIS : START ROM : GOOD RAM : GOOD SIO : GOOD PS : GOOD ANTENNA CHECK : GOOD 518KHZ OVER ALL TEST : GOOD 490KHZ OVER ALL TEST : GOOD 4209.5KHZ OVER ALL TEST: GOOD
(THE QUICK BLOWN FOX JUMPS OVER THE LAZY DOG.123456789,?/+-:=) 2.LCD DIAGNOSIS :CANCEL 3.SELF DIAGNOSIS LOG Procudure 1. Press the key in order to select the item to diagnose. Fig.6-14 SELF DIAGNOSIS screen 2. When the ENT key is pressed, the menu screen of selected item appears. Pressing the key can display the same.
- When cursor is on the item 1 or 2, cursor moves to the right side of ":"
- When cursor is on the item 3, the menu screen of item 3 appears. When character size has selected LARGE, these character strings are not displayed.
- To return to the MAINTENANCE screen, press the CLR key or key.
- If the key is pressed when cursor is on the START of the item 1 or 2, cursor returns on the item 1 or 2. (1.SELF DIAGNOSIS or 2.LCD DIAGNOSIS) The outlines of menus are as follows;
1. SELF DIAGNOSIS:
2. LCD DIAGNOSIS:
3. SELF DIAGNOSIS LOG:
NCR-333 is diagnosed. (See a)) LCD panel is diagnosed. (See b)) The diagnostic result log of the item 1 is displayed. (See c)) Notes 6-43 a. The Diagnosis of equipment (SELF DIAGNOSIS) Procudure 1) Select 1.SELF DIAGNOSIS, and press the ENT key. Cursor moves to the right side of ":". 2) Press the key and select the following items;
START:
ST-PRTN: Self diagnosis is started. After self diagnosis is completed, the diagnosis results are Self diagnosis is started. However, the diagnostic results are not printed. printed. CANCEL: Self diagnosis is not started. Cursor returns to 1.SELF DIAGNOSIS. 3) Select the START or ST-PRTN, and then press the ENT key. Self diagnosis starts by the ROM test and is ended by the 4209.5 kHz over all test. During diagnosis, SELF DIAGNOSIS of screen title repeats blink. The buzzer sounds at the last of diagnosis, and check that the buzzer sounds normally. Press CLR key to stop the beeping. 1.SELF DIAGNOSIS : START ROM : GOOD RAM : GOOD SIO : GOOD PS : GOOD ANTENNA CHECK : GOOD 518KHZ OVER ALL TEST:
490KHZ OVER ALL TEST:
4209.5KHZ OVER ALL TEST:
OVER ALL TEST takes about 15 seconds per test. Whenever one test (OVER ALL TEST) is completed, character string as shown in the following figure is displayed. When * is displayed in a character string, the test result is NG. 1.SELF DIAGNOSIS : START ROM : GOOD RAM : GOOD SIO : GOOD PS : GOOD ANTENNA CHECK : GOOD 518KHZ OVER ALL TEST: GOOD 490KHZ OVER ALL TEST:
4209.5KHZ OVER ALL TEST:
(THE QUICK BLOWN FOX JUMPS OVER THE LAZY DOG.123456789,?/+-:=) When the result of the malfunction is displayed, contact our service center or an agency as soon as Test signal (Character strings):
THE QUICK BLOWN FOX JUMPS OVER THE LAZY DOG. 123456789,?/+-:=
OVER ALL TEST:
"OVER ALL TEST" is the test which outputs a test signal from the inside of the circuit, and receives the signal from each receiver. Caution possible after referring to troubleshooting of Chapter 7. The list of diagnosis items Diagnosis items ROM RAM SIO PS ANTENNA CHECK 518KHZ OVER ALL TEST 490KHZ OVER ALL TEST 4209.5KHZ OVER ALL TEST 6-44 Explanation The data memory and the program memory are checked. When the program memory is abnormal (NG), [1] is displayed, and when the data memory is abnormal, [2] is displayed. The memory for temporarily storage is checked. Serial interfaces are checked. When the ECDIS/GPS port is abnormal (NG), [1] is displayed, and when the Maintenance/Printer port is abnormal, [2] is displayed, and when the DISP port is abnormal, [3] is displayed. The power supply part is checked. Connection with NAVTEX antenna is checked. Internal receiver (RX1) is checked. Internal receiver (RX2) is checked. Internal receiver (RX3) is checked. Corrective Action Replace CMJ-501N. Replace CMN-2333. b. The diagnosis of LCD panel (LCD DIAGNOSIS) Procudure 1) Select 2.LCD DIAGNOSIS, and press the ENT key. Cursor moves to the right side of ":". 2) Press the key and select the following items;
START:
CANCEL: Diagnosis is canceled, and cursor returns to 2.LCD DIAGNOSIS. Diagnosis is started. 3) Select the START, and press the ENT key. This diagnosis blinks the viewing area (White -> Black -> White-> ...). c. Self diagnosis log (SELF DIAGNOSIS LOG) Procudure 1) Select 3.SELF DIAGNOSIS LOG, and press the ENT key. SELF DIAGNOSIS LOG screen appears. The newest result is displayed on this screen. 2) To display the next old result, press the key. (Up to last 10 results) The diagnosed time is displayed when external GPS receiver is connected.
--/--/-- --:-- is displayed when time is not able to be acquired. (External GPS receiver is not connected.) To print a result to the external printer, press the * key in order to display the sub screen. Select the [PRINT OUT], and press the ENT key. Printing is started. To stop printing, press the CLR key while printing. To return to the SELF DIAGNOSIS screen, select the
[CANCEL] and press the ENT key. SELF DIAGNOSIS LOG 9.RESULT 29/06/05 12:34 ROM[1][2] :NG RAM :GOOD SIO[1][2][3] :NG PS :GOOD ANTENNA CHECK :GOOD 518KHZ OVER ALL TEST:GOOD 490KHZ OVER ALL TEST:GOOD 4209.5KHZ OVER ALL TEST:GOOD SELF DIAGNOSIS LOG 9.RESULT 29/06/05 12:34 ROM[1][2] :NG RAM :GOOD SIO[1][2][3] :NG PS :GOOD ANTENNA CHECK :GOOD 518KHZ OVER ALL TEST:GOOD 490KHZ OVER ALL TEST:GOOD 4209.5KHZ OVER ALL TEST:GOOD
*DIAGNOSIS LOG*
[PRINT OUT]
[CANCEL]
6-45 6.3.5.2 NAVTEX alarms (NAVTEX ALARM) To display NAVTEX ALARM screen, select 2.NAVTEX ALARM from MAINTENANCE menu (6.3.5). In the NAVTEX ALARM screen, the present alarm is displayed. On the ALARM HISTORY screen, the alarm which occurred in operation can be displayed from the latest one to a maximum of 20 affairs. NAVTEX ALARM 11/12/05 15:34 054,A,Printer err Fig.6-15 NAVTEX ALARM screen Notes
- To return to the MAINTENANCE screen, press the CLR key or key.
- "NO DATA" is displayed when NAVTEX alarm has not occurred. To print the NAVTEX alarms to the external printer, press the * key in order to display the sub screen. Select the [PRINT OUT], and press the ENT key. Printing is started. To stop printing, press the CLR key while printing. To return to the NAVTEX ALARM screen, select the [CANCEL] and press the ENT key. NAVTEX ALARM 11/12/05 15:34 054,A,Printer err
*NAVTEX ALARM*
[HISTORY]
[PRINT OUT]
[CANCEL]
6-46 a. Alarm history (ALARM HISTORY) This screen displays a history of alarms which occur while the power is on. It displays the alarm history from the most recent one maximum 20 lines. NAVTEX ALARM 3.11/12/04 15:30 001 A antenna malfunction 4.11/12/04 15:30 002 A power supply error 5.02/11/04 02:31 001 V antenna malfunction 6.02/11/04 02:19 001 A antenna malfunction 7.23/09/04 22:15 001 V antenna malfunction 8.23/09/04 22:15 002 V power supply error 9.23/09/04 22:14 002 A power supply error 10.23/09/04 22:13 001 A antenna malfunction To return to the NAVTEX ALARM screen, press the CLR key or key. Procudure 1) To display the next old result, press the key. Fig.6-16 ALARM HISTORY screen NAVTEX ALARM 3.11/12/04 15:30 001 A antenna malfunction 4.11/12/04 15:30 002 A power supply error 5.02/11/04 02:31 001 V antenna malfunction 6.02/11/04 02:19 001 A antenna malfunction 7.23/09/04 22:15 001 V antenna malfunction 8.23/09/04 22:15 002 V power supply error 9.23/09/04 22:14 002 A power supply error 10.23/09/04 22:13 001 A antenna malfunction
*NAVTEX ALARM*
[PRINT OUT]
[CANCEL]
- mark is displayed on the bottom line when the alarm history screen is able to scroll downward.
- mark is displayed on the top line when the alarm history screen is able to scroll upward.
- Press the key and scroll the viewing area. The time of an alarm occurred and is restored is displayed when external GPS receiver is connected.
--/--/-- --:-- is displayed when time is not able to be acquired. (External GPS receiver is not connected.) The display of the alarm is described. Alarm message: 001, V, antenna malfufnction 1 2 3 1: The alarm number (refer to the following table) 2: The alarm condition -> V: Healthy status, A: Alarm is occurring 3: Alarms description text (refer to the following table) The list of NAVTEX alarm Alarm No. 002 003 004 005 006 051 052 053 054 055 Alarms description text Receiver 1 malfunction Receiver 2 malfunction Receiver 3 malfunction General failure Built in self test failure Antenna malfunction Flash memory error Rx unit modem error Printer error EXT SIO output error The contents of unusual detection Unusual detection at the RX1 Unusual detection at the RX2 Unusual detection at the RX3 Unusual detection at the power supply part Self diagnosis failure Unusual detection of antenna connection The data in a memory is broken. Unusual detection at the modem part External printer has malfunction Unusual detection at the DISP output port 2) To print the NAVTEX alarms to the external printer, press the * key in order to display the sub screen. Select the [PRINT OUT], and press the ENT key. Printing is started.
[PRINT OUT]: Printing is started.
[CANCEL]: Diagnosis is canceled, and the sub screen is closed. 6-47 490KHZ DISABLED AREA:
518KHZ DISABLED AREA:
A--D-----J----OPQR--------
STATUS NAVAREA:
6.3.5.3 Setting status of the NAVTEX Receiver (STATUS) To display STATUS screen, select 3.STATUS from MAINTENANCE menu (6.3.5). The setting information of NCR-333 is displayed on the screen. The setting information of each items are as follows;
N OF STORED MSG: 94: 52: 22 N OF SAVE MSG: 39: 21: 5 4209.5KHZ DISABLED MESSAGE TYPE:
518KHZ DISABLED MESSAGE TYPE:
490KHZ DISABLED MESSAGE TYPE:
---------J-------------XYZ
---D----------OPQR--------
-----EF-----MNOPQR--------
-----EF-----MNOPQR--------
-----EF-----MNOPQR--------
4209.5KHZ DISABLED AREA:
Fig.6-17 STATUS screen
- 518 (490, 4209.5) kHz DISABLED AREA: The alphabet of stations which does not receive is displayed.
- 518 (490, 4209.5) kHz DISABLED MESSAGE TYPE:
The alphabet of message type which does not receive is displayed.
- N OF STORED MSG: The number of the stored messages is displayed. Starting from the left, 518k, 490k, and 4209.5 kHz are displayed. When the number of the stored messages is the maximum, it is displayed as FULL. The number of the saved messages is displayed. Starting from the left, 518k, 490k, and 4209.5 kHz are displayed. When the number of the saved messages is the maximum, it is displayed as FULL.
- N OF SAVE MSG:
Notes
- To return to the MAINTENANCE screen, press the CLR key or key. Press the * key in order to display the sub screen. To print the setting status to the external printer, select the [PRINT OUT], and press the ENT key. To stop printing, press the CLR key while printing. To output the status data to serial ports, select the
[DATA OUT], and press the ENT key. To stop outputting press the CLR key while data outputting. To return to the STATUS screen, select the [CANCEL]
and press the ENT key. NAVTEX ALARM NAVAREA:
518KHZ DISABLED AREA:
AD-----J----OPQR--------
490KHZ DISABLED AREA:
---------J-------------XYZ 4209.5KHZ DISABLED AREA:
---D----------OPQR--------
518KHZ DISABLED MESSAGE TYPE:
-----EF-----MNOPQR--------
490KHZ DISABLED MESSAGE TYPE:
*STATUS*
[PRINT OUT]
[DATA OUT]
[CANCEL]
-----EF-----MNOPQR--------
4209.5KHZ DISABLED MESSAGE TYPE:
-----EF-----MNOPQR--------
N OF STORED MSG: 94: 52: 100 N OF SAVE MSG: 39: 40:FULL 6-48 6.3.5.4 Port monitor (PORT MONITOR) Select 4.PORT MONITOR, and press the ENT key. PORT MONITOR screen appears. Select the port for monitoring. It can check whether data is normally outputted from the port. In addition, the displayed data can be stored temporarily to be rechecked. PORT MONITOR 1.PORT SELECTION: OFF 2.PORT LOG Procudure 1. Press the key in order to select the items. Fig.6-18 PORT MONITOR screen 2. When the ENT key is pressed, the menu screen of selected item appears. Pressing the key can display the same.
- When cursor is on the item 1, cursor moves to the right side of ":"
- When cursor is on the item 2, the menu screen of item 2 appears. Notes
- To return to the MAINTENANCE screen, press the CLR key or key.
- If the key is pressed when cursor is on the right side of ":" of the item 1, cursor returns on the item 1. (1.PORT SELCTION) The outlines of menus are as follows;
1. PORT SELECTION:
2. PORT LOG:
Select the port to check the serial in/output data. (See a. The check of in/output data) The data stored temporarily is displayed. (See c. Port log) 6-49 a. The check of in/output data (PORT SELECTION) Procudure 1) Select 1.PORT SELECTION, and press the ENT key. Cursor moves to the right side of ":". 2) Press the key and select the following items;
OFF:
GPS IN:
DISP IN:
DISP OUT: Output data of the DISP (Option) port The monitoring of each port does not carry out. Input data of the GPS port Input data of the DISP (Option) port 3) Example - Select the GPS IN, and press the ENT key. PORT MONITOR menu screen changes to the data display screen. PORT MONITOR 1. PORT MONITOR: GPS IN 2. PORT LOG ENT CLR PORT MONITOR
$PRMC,012601.00,A,3541.273,N,1393 4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C
$PRMC,012601.00,A,3541.273,N,1393 4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C Notes
- When neither the GPS receiver nor MPD is connected to the port of GPS IN and DISP IN, nothing is displayed on the data display screen. b. Store the displaying data temporarily Procudure 1) Press the * key. The sub screen appears. 2) Select the [START], and press the ENT key. Storing of the displaying data is started. During storing, the following is displayed on the screen title. NOW LOGGING... Notes PORT MONITOR
$PRMC,012601.00,A,3541.273,N,1393 4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C
$PRMC,012601.00,A,3541.273,N,1393
*PORT MONITOR*
[START]
[STOP]
4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C
- When the MENU, DISP or USER key is pressed, storing of the displaying data is stopped.
- Data is recordable to two screens.
- Data is stored until it turns off the power. 3) For canceling, select the [STOP] and press the ENT key. The sub screen is closed, and storing of the displaying data is stopped. 6-50 c. Port logPORT LOG Procudure 1) Select 2.PORT LOG, and press the ENT key. PORT LOG screen appears. The data stored in the PORT MONITOR is displayed on this screen.
$GPGLL,3541.273,N,13934.251,E,0126 PORT LOG
$PRMC,012601.00,A,3541.273,N,1393 4.251,E,00.0,158.,020903,00.,W,D*2 D ENT 1.PORT MONITOR: GPS IN PORT LOG 2) mark is displayed on the bottom line when the PORT LOG screen is able to scroll downward.
- mark is displayed on the top line when the PORT LOG screen is able to scroll upward. Press the key and scroll the viewing area. 2. PORT LOG CLR 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C 4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126
$PRMC,012601.00,A,3541.273,N,1393 PORT LOG
$PRMC,012601.00,A,3541.273,N,1393 4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C
$PRMC,012601.00,A,3541.273,N,1393
*PORT LOG*
[PRINT OUT]
[DATA OUT]
[CANCEL]
4.251,E,00.0,158.,020903,00.,W,D*2 D
$GPGLL,3541.273,N,13934.251,E,0126 01.0
$GPGGA,012602.00,3541.273,N,13934. 251,E,2,08,01.0,+0050,M,+039,M,05,
,0686*5C Press the * key. The sub screen appears. To print the setting status to the external printer, select the [PRINT OUT], and press the ENT key. To stop printing, press the CLR key while printing. To output the status data to serial ports, select the
[DATA OUT], and press the ENT key. To stop outputting, press the CLR key while data outputting. To return to the PORT LOG screen, select the
[CANCEL] and press the ENT key. Notes
- All the character strings displayed on the PORT LOG screen are printed. 6-51 6.3.5.5 Software version (SOFTWARE VERSION) When MAINTENANCE menu screen is displayed, the present software version is displayed on the item 5. To display the MAIN MENU, press the CLR key. The explanations of each item are as follows;
MANINTENANCE 1.SELF DIAGNOSIS 2.NAVTEX ALARM 3.STATUS 4.PORT MONITOR 5.SOFTWARE VERSION
- PROGRAM : 12.34
- LANGUAGE: 21A
- OPTION : ---
Fig.6-19 Maintenance manu screen
- PROGRAM:
- LANGUAGE:
- OPTION:
Program version is displayed. Langage version is displayed. Option langage version is displayed. When the option language is not installed, --- is displayed. 6.3.6 The display language setting (LANGUAGE) To select the display language, select 6.LANGUAGE from MAIN MENU (6.3). Press the key and select the language. When the ENT key is pressed, menu screens are displayed in the selected language. When the language data is already installed, the language name is displayed as follows. 6.LANGUAGE: ENGLISH
- FRENCH
- PORTUGUESE
- ITALIAN
- SPANISH When the option language is already installed, the option language name is displayed. The initial setting is ENGLISH. 6-52 7. MAINTENANCE AND INSPECTION The performance and longevity of this equipment depend on careful maintenance. To maintain the best performance, the following periodic inspections are highly recommended. CAUTION Keep the power supply voltage within the specified value (10.8 - 35Vdc). Know the condition of normal status when the equipment is properly functioning. Keep comparing the current status to the normal status to immediately detect any malfunctions. WARNING Do not attempt to inspect or repair the inside of this equipment with the exception of qualified service personnel, as doing so may cause fire, electric shock or malfunction. If any malfunctions are detected, contact our service center or agents. Use only specified fuses. The use of other fuse may cause fire and/or damage. The fuses are used for NBG-319 or NBG-320. The power switch on the power distribution panel must be turned off during replacing a fuse. Remove the cap of the front panel, and then exchange fuses. 7. 1 General Maintenance and Inspection Below are listed general maintaining and inspecting items, which can be done with usual tools and apparatus. No. Item Maintenance and inspection Cleaning Gently clean the surface of the panel, switches, and cover with soft cloth or silicon oil. No oil is needed because this unit has no moving mechanisms inside. Looseness of parts Inspect for looseness and correctly tighten the following:
Screws, nuts and connectors. 1 2 7-1 7. 2 Periodic Inspection Regarding the functions for performing self-diagnosis and monitoring the system status, please refer to 6.3.5 Maintenance Menu 7.2.1 Confirming the RX station and Message type To check the receiving station and message type, please refer to 6.1.3 and 6.3.2. Be sure to set up the receiving station and message type correctly. 7.2.2 Confirming the Alarm Status With referring 6.3.5.2, confirm that failure alarm is not occurring. If any alarm occurs, check the cause of the alarm. NCR-333 Alarm Table is followings. Failure alarm list (ALR sentence output) Indication NCR-333 Alarm Table General failure Built in self test failure Built in self test failure Antenna malfunction Receiver 1 malfunction Built in self test failure Receiver 2 malfunction Built in self test failure Receiver 3 malfunction Built in self test failure Receiver 1 malfunction Rx unit modem error Receiver 2 malfunction Rx unit modem error Receiver 3 malfunction Rx unit modem error Antenna malfunction General failure Printer error EXT SIO output error Alarm Occurrence Conditions After carrying out self-diagnosis, NCR-333 detected that the input voltage was abnormal. After carrying out self-diagnosis, NCR-333 detected that the output voltage of antenna terminal was low voltage. After carrying out self-diagnosis, NCR-333 detected that the receiver 1 (518kHz) could not receive because of abnormalities. After carrying out self-diagnosis, NCR-333 detected that the receiver 2 (490kHz) could not receive because of abnormalities. After carrying out self-diagnosis, NCR-333 detected that the receiver 3 (4209.5kHz) could not receive because of abnormalities. The receiver 1 (518kHz) could not receive because of internal MODEM failure. The receiver 2 (490kHz) could not receive because of internal MODEM failure. The receiver 3 (4209.5kHz) could not receive because of internal MODEM failure. The output voltage of antenna terminal is low voltage. The input voltage is low level. External printer is abnormal. DISP output port is abnormal. Alarm No. 005 006 006 051 002 006 003 006 004 006 002 053 003 053 004 053 051 005 054 055 7-2 7. 3 Trouble Shootings 7.3.1 Trouble Shootings WARNING Do not attempt to inspect or repair the inside of this equipment with the exception of qualified service personnel, as doing so may cause fire, electric shock or malfunction. If any malfunctions are detected, contact our service center or agents. For reference, this section presents a troubleshooting guideline for finding defective sections. Symptom of Error Power is not supplied when the power switch is pressed. Possible Cause or Cause of Fault Countermeasures Power is not distributed from the inboard distribution panel. Power is not supplied from the power supply unit or NCR-333. Some dots are missing on the LCD. No alarming sound is generated. The illumination does not light. No NAVTEX message is received. Sensor data (external GPS, and rate-of-turn) cannot be loaded. gyro, Power that the power unit supplies is out of range. The fuses in the Power Supply Unit
(Option) are blown out. The power supply cable is broken. The controller switch is broken. The LCD malfunctions. The control unit malfunctions. The buzzer malfunctions. The control unit malfunctions. The control unit malfunctions. number following The LCD malfunctions. The polarity or antenna cable is incorrect. Neither the receiving station nor the message type is selected correctly. The NAVTEX antenna (NAW-333) is damaged. The alarm appears: 002, 003, or 004. Internal receiver 1, 2 or 3 is broken. The polarity of the serial cable is incorrect. The interface between the sensor and NCR-333 is incorrect. The sentence the sensor generates is not supported by the NCR-333. The serial format (baud rate, etc.) does not meet the setting of the controller. The sensor (GPS, gyro, rate-of-turn indicator) malfunctions. that Supply power from the distribution panel. Check that the wiring of the power unit is correct. Check that the output voltage of the power unit or NCR-333 is correct. Replace the power unit. Check that the wiring is correct and replace the fuses. Replace the power supply cable. Replace the CMD-953 circuit board. Replace the LCD. Replace board. Replace the CMD-953 circuit board. Replace the CMJ-501N circuit board. the CMJ-501N circuit the CMJ-501N circuit Replace board. Replace the LCD. Check if the polarity is correct and connect it. Refer to 6.3.1 or 6.3.2. Replace the NAW-333. Replace the CMN-2333. Check if the polarity is correct and connect it. Check if the interface is correct before its connection. Check the output command and the version. Check sensor. the serial format of the Replace the sensor. 7-3 gyro, Symptom of Error Sensor data (external GPS, and rate-of-turn) cannot be loaded. The external printer does not print Possible Cause or Cause of Fault Countermeasures The DPU (CMJ-501N) malfunctions. Replace the CMJ-501N circuit board. The external printer is not ON. The printer power is not turned on. Check the printer power cable. Printer property (printer settings) is incorrect. Turn on the external printer. Refer to 6.3.4.5. 7.3.2 Maintenance Units Maintenance units for repair are followings. Unit Name RX UNIT DPU KEYBOARD UNIT NAVTEX ANTENNA POWER SUPPLY UNIT POWER SUPPLY UNIT No. 1 2 3 4 5 6 7 Whip Antenna Model CMN-2333 CMJ-501N CMD-953 NAW-333-1 NBG-319 NBG-320 5ABBE00001 Fuses No. 1 2 3 Unit Name 5A Fuse 2A Fuse 4A Fuse Model ULTSC 5A N1 MQ4 250V 2A MQ2 125V 4A 7.3.3 Spear parts for periodic maintenance Spear parts for periodic maintenance are followings. Decline period CCN-392 40,000 hours Unit Name Code LCD Unit Printer
(Option) DPU-414 Approx. 500,000 lines No. 1 2 7-4 Note ANTENNA for NCR-333 DC: +12/24Vdc AC: 110/220Vac, DC: +12/24Vdc 0.6 m Note For NBG-319 For NBG-320 For NBG-320 Note 5 years in continuous operation When the thermal paper of 25m roll length is used, about 90 thermal papers can be used. 8. AFTER-SALES SERVICE Warranty
Warranty period is one year from the purchase day. Warranty
Keeping period of maintenance parts is ten years from the production is discontinued. Before returning repair If what appears to be a malfunction is detected, refer to 7.3 Troubleshooting to check if the equipment is actually defective before requesting repair. If the defect persists, immediately stop operation and call our service center or agents.
During the warranty period, our agencies or we will repair the malfunction without any fee, according to the specified procedure.
After the warranty expires, we will repair the malfunction for a fee, if repair is possible. In this case, send the parts or well repair onboard in a specified port. The parts may be repaired in a plant if its unrepairable onboard. Item for notification Product name, type, manufactured data, serial number, information about the malfunction (the more detailed, the better), information about the alarm number and software version, your company or organization name, address and phone number. Periodical maintenance recommendation Performance of this equipment may degrade over time because parts wear out, although degradation depends on how this unit has been maintained. We recommend periodic professional maintenance checks in addition to daily maintenance. Call our service center or agents for periodic professional maintenance (This maintenance requires a service charge). Call our office or the nearest agency for detailed information about after-sales service.
[JRC offices or the nearest agency]
See the List of JRC offices or the nearest agency at the end of this manual. 8-1 8-2 9. SPECIFICATIONS 9.1 NAVTEX RECEIVER (NCR-333) 9.1.1 Receiver
(1) Receiving frequency
(2) Receiving modulation
(3) Sensitivity
(4) Antenna input
: 518kHz, 490kHz and 4209.5kHz
: F1B
: CER 1x10-2 at 1uV (CER: Character Error Rate)
: 50 ohms for NAVTEX antenna 50 ohms for wide-band antenna High impedance for wire antenna 9.1.2 Operation panel
(1) Type of display
(2) Key board
(3) Back-light
(4) Dimmer control 9.1.3 Power supply
: 5.7-inch FSTN LCD, 320240 dots
: 12 keys
: For LCD and key board
: Bright, medium1, medium2, off (Selectable from keyboard)
(1) Input voltage
(2) Power consumption
: 12 / 24Vdc (+30%, -10%)
: 9 W (at 24 Vdc input) 9.1.4 External interfaces
(1) INS (Integrated Navigation System) communication ports DATA IN / DATA OUT One communication port meets the requirements of IEC 61162-1
- Baudrate
- Data bit
- Parity
- Stop bit
- Flow control
: 4800bps
: 8bits
: none
: 1bit
: none
(2) External printer / maintenance port PRINTER/MAINTENANCE One communication port meets the requirements of RS-232C (D-sub 9pin).
- Baudrate
- Data bit
- Parity
- Stop bit
- Flow control
: User setting (4800 / 9600 / 38.4k bps)
: 8bits
: none
: 1bit
: User setting (Hard / None)
(3) Relay terminals BK One port for Break in relay signal
(4) Relay terminals EXT ALR One port for external alarm device
(5) Remote maintenance data output port DATA OUT2 One output port meets the requirements of IEC 61162-1
(6) MPD (Multi purpose display) communication port DISP One communication port meets the requirements of RS-485 9-1 Durability and resistance to environmental conditions: protected from the weather (IEC 60945)
(1) Operating temperature
(2) Storage temperature
(3) Water resistance
: -15C to +55C (IEC 60945)
: -25C to +75C
: IPX2 9.1.5 Environmental condition 9.1.6 Supported interface sentences Indication DATA IN DATA OUT Sentence format Supported sentence formatters Input data Longitude/Latitude Time of Position Datum Reference Speed Over Ground (SOG) Course Over Ground (COG) Heading Rate of Turn Acknowledge alarm Request NAVTEX messages Set NAVTEX mask Output data IEC61162-1
(NMEA Ver 1.5 -
2.3) IEC61097-6 IEC61162-1 IEC61097-6 Set alarm state ALR New NAVTEX received message NRX NMK Set NAVTEX mask RMC, GGA,GLL DTM RMC, VTG RMC, VTG HDT ROT ACK NRQ NMK 9.1.7 Received message log
(1) Stored message
(2) Saved message
: Stores the 200 last received messages (*1). (Each channel)
: Stores the 50 stored messages (*1). (Each channel)
(*1): message ... 500 character long message Stored messages are erased 70 hours after their reception. The source of time for handling message ageing is RMC sentence from an external source
(DATA IN). When the data from the external source is not inputted, it is counted by the internal timer. 9-2 9.2 NAVTEX ANTENNA (NAW-333 - Option) 9.2.1 Electrical characteristics
(1) Receiving frequency
(2) Bandwidth
(3) Consumption current
(4) Impedance 9.2.2 Environmental condition
: 518kHz, 490kHz and 4209.5kHz
: 504kHz 4209.5kHz
: 7Vdc 13mA (Typ.)
: 50 ohms
: 20kHz
: 100kHz
(1) Operating temperature
: -25C to +55C (IEC 60945) 9.3 POWER SUPPLY UNIT (NBG-320 - Option)
(1) Input voltage
(2) Output voltage
: 100-120 / 200-220 Vdc 10%, 50/60Hz Single phase
: 24Vdc (+30%, -10%) (Back up power supply)
: Typ. 12Vdc 10%
6.5Vdc 10% (for External Printer)
: 1.5 A (24V) 2.0 A (6.5V)
(3) Maximum current 9.4 POWER SUPPLY UNIT (NBG-319 - Option)
(1) Input voltage
(2) Output voltage
(3) Maximum current
: 10.8 - 35Vdc
: 10.8 - 35Vdc Typ. 6.5Vdc 10% (for External Printer)
: 1.5 A (12 / 24V) 2.0 A (6.5V) 9-3 9-4
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-09-16 | 0.518 ~ 4.209 | RNV - Part 80 NAVTEX Receiver | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-09-16
|
||||
1 | Applicant's complete, legal business name |
Japan Radio Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0028126522
|
||||
1 | Physical Address |
226 Airport Parkway, Suite 355
|
||||
1 |
226 Airport Parkway
|
|||||
1 |
San Jose, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
CKE
|
||||
1 | Equipment Product Code |
NCR-333
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y**** K********
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
1-408********
|
||||
1 |
k******@jrc.co.jp
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Japan Radio Co., Ltd.
|
||||
1 | Name |
E******** K****** D******
|
||||
1 | Physical Address |
1021 S.W. Klickitat Way
|
||||
1 |
Seattle, Washington 98134
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
206-6******** Extension:
|
||||
1 | Fax Number |
206-6********
|
||||
1 |
e******@jrcamerica.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Japan Radio Co., Ltd.
|
||||
1 | Name |
T**** A********
|
||||
1 | Physical Address |
1021 S.W. Klickitat Way
|
||||
1 |
Seattle, Washington 98134
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
206-6******** Extension:
|
||||
1 | Fax Number |
206-6********
|
||||
1 |
t******@jrcamerica.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | RNV - Part 80 NAVTEX Receiver | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Marine NAVTEX Receiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 80.1101(c)(1) | GM | 0.51800000 | 4.20900000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC