Wild Waves User Manual Battery installation For Wild Waves:
Turn the latch to the left or right. Remove the screw and open the battery cover. Insert 3x 1.5V AAA Alkaline batteries and close the battery cover. Put the screw back, turn the latch back and lock the battery cover. For Remote Controller:
Remove the screw and open the battery cover. Insert 2x 1.5V AA Alkaline batteries and close the battery cover. Put the screw back. Operation procedure Put the Wild Waves on the water and make sure the frequency docking successfully when the speedboat and the controller are turned on. Use the remote controller to control the Wild Waves The speedboat will move forward when you press the up button in left side. The speedboat will move backward when you press the down button in left side. The speedboat will turn left and forward when you press the up button in left side and left button in right side. The speedboat will turn right and forward when you press the up button in left side and right button in right side. The speedboat will turn left and backward when you press the down button in left side and left button in right side. The speedboat will turn right and backward when you press the down button in left side and right button in right side. Wild Waves User Manual Notes:
Please make sure the speedboat and remote controller within 8-10meter range. Age Recommendation: 10+ years and adult supervision required. If you do not play the speedboat, you must remove the batteries from both of the remote controller and the speedboat. Packaging includes:
Speedboat unit 1pc Remote controller unit 1pc Product dimension:
Speedboat unit: 9W x 4.75D x 3H Remote controller unit: 3.5W x 2.5D x 1.5H Description:
Remote controller batteries: 2 x 1.5V AA Alkaline batteries are not included Wild Waves batteries: 3 x 1.5V AAA Alkaline batteries are not included Range: 8-10 meters Duration: about 15mins Suitable for children of 10 years old or above Place the Wild Waves on the water before playing. The Wild Waves will malfunction if submerged underwater. For safety, do not touch the propeller when the Wild Waves is on the water. Wild Waves User Manual This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changers or modifications to this unit not expressly approved by the party responsible for the compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part, 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Conforms to ASTM F963-17