PHW600 Phone Holder with Wireless Charger Manual Congratulations on your purchase of the PHW600 Phone Holder with wireless charger. This Product is an in-car holder and charger for smartphones. To ensure a long service life and optimum functionality of the product we recommend that you read this manual carefully. Package Content 1 Phone Holder 1 USB charging cable 1 User Manual Features:
1. Input: DC 5V,2A 2. Output: DC 5V,1A 3. Wide compatibility Instructions 1. Clip the bracket into the air outlet. 2. Insert the USB charging cable into car charger and the Micro USB port of PHW600.The red led indicator lights up to indicate well connectivity. 3. Hold the side and pull out the splint. 4. Clip the smartphone into the holder. Place the smartphone on the center of the wireless charger or adjust the placement position until the charging process starts. The red led indicator goes out and blue led indicator lights up. 5. Provide you with a safe charging enviroment. General usage tips
. Do not place any metal objects between the smartphone and the wireless charger The smartphone may not charge properly. To ensure more effective charging, remove protective cases. Charging time depends on battery capacity, phone input specifications, current phone energy consumption, phone position on the wireless charger, charging distance, etc. Possible causes of wireless charging problems
. Your device is not compatible with the Qi wireless charging standard. Your device is placed on the wireless charger in a wrong way. See the manual of your smartphone to find the exact place of the built-in Qi wireless charging receiver. A protective case of the smartphone or another object on the back of the smartphone is blocking the charging process. The car charger is too weak, detective or unplugged from the socket. The charging cable is unplugged, broken or too weak for correct functioning. Safety information
. Do not drop or cause an impact on the device. Do not disassemble, modify or repair your device. Keep away from humidity and heat. Keep it beyond the reach of children. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure: A distance of 15 cm shall be maintained between the antenna and users, and the transmitter may not be co-located with any other transmitter or antenna.