Wireless Power Charger Instruction Manual of the product we Charger *1; USB Cable *1; User Manual *1 Congratulatlons on your purchase of the Wireless Power Charger. To ensure a long service life and optimum functionality recommend that you read this manual carefully. Package Content Wireless Specifications lnput(Micro Wireless USB OJtput: DC 5V/1A Charging Typa-C port Is only used for lnputl General infonnation 1. This charger Output: DC 5V/1A (SN); DC 9V/1.1A works with all Ql-compatlble DC 5V/2A; DC 9V/1.67A port orTyp&-C port):
distanoe <;;6mm
(10W) d&vlces (please make sure your device is Qi-<XJmpatibla) 2. Devices are available 3. For oonmal operation, 4. For a fast wfreless charging mode, use the Quick Charger 2.0/3.0 with built-in or external wireless charging receivers. no weaker than DC 5V, 2A charger is required. compatlble charger and compatible smartphones. 5. This wireless charger can charger smartphones with oon-metal protective case or slllcone covers that are no thicker than 6mm. Instructions 1.Connect the wlreless charger with the Included USB charging cable or another good performance Type-C charging cable to the wall charger and plug the charger Into an electronic socket, the red led will light up. 2. Place the smartphone with the display facing up on the centre of the wireless charger or adjust blue led lights up. the placement position until the charging process starts, the 3. To save energy, unplug the charger when oot in use. 4. When 1he smartphone is fully charged, remove it from the wireless charger. When the charging rs completed, your smartphone will Indicate ls full. on the screen)
(check the smartphone's battery status using the charging Jeon displayed that the battery 5. To charge other device.plug the USB cable Into the USB port and coMact the other end with your device, when this wireless charger is powered with wall charger. General usage tips 1. Do not place any metal objects between the smartphone and the wireless charger. 2. To ensure more effective charging, 3. Charging time depends Input spectlicatfons,cumint phone on battery capacity.phone remove protective cases. energy consumptlon,phone position causes of wfreless Posslble 1. Your device is not compatible 2. Your device ls placed on the wireless charger In a wrong position.See the manuel of problems standard. with the Qi wireless charging on the wireless charger,charglng charging dlstenoe, etc. your smartphone to find the exact place of the built-in Qi wireless charging receiver. cable ls unplugged, broken or too weak for correct functlonlng. 3. A protective case of the smartphone or aoother object on the back of the smartphone is blocking the charging process. 4. The USB charger rs too weak, defectll/e or unplugged 5. The charging Safety Information 1 . Do oot drop or cause an Impact on the device. 2. Do oot disassemble, modify or repair 3. Keep away from humidity and heat. 4. Keep rt beyond the reach of children. Precaution!
1. Metal objects placed on top of charging devices might result matfunctlon of the your device. Item and damage the charging device on top of It. 2. Do oot operate the Item on top of any metal work table or surface. MODEL: WPC488-10W from tha electr1c socket. FCC ID: 2APU5-WPC488-10W Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.