FCC ID: 2A2N7-J55IN-EAR2 Wireless earphone

SAKNIP IN-EAR 2

Wireless earphonesinstructions

Please read the instructions carefully and keep

them properly before using the product

Product overview

SAKNIP

is a new

generation of bluetooth 5.0 standard, which supports

two-way voice calls.

IN-EAR 2—TWS wireless headset

Wireless portable headset with touch control.

SAKNIP IN-EAR 2 wireless earphones are equipped with

charging bin.

Parameter configuration

True wireless connection (TWS) to achieve wireless stereo,

left and right channel separation, HF sound, Left and right

ear.

Both have complete bluetooth function, can be used alone

or in pairs.

Touch control

2.4 - 2.48GHz

8 -15m

80mm *30mm

4.2g *2

24h

4h

The headset

-1-

The bluetooth pairing

First pairing: after picking up the left and right earphones,

press long to boot up and enter into bluetooth pairing, then

divide. Do not click left and right earphones, let the left and

right earphones enter search matching mode (indicator light

flashes quickly), after the match is successful, search the

headphone device name "SAKNIP IN-EAR 2" on the phone and

click after pairing, use the charging bin to start up the power

pair, and press the multifunction button for 5 seconds for

shutdown.

Connection status of all devices.

Left ear

touch 1 time multifunction button to

volume decrease

answer

hang up

touch 2 time multifunction button to

pause / play music

reject incoming call

touch 3 time multifunction button to

next song

Right ear

touch 1 time multifunction button to

volume plus

answer

hang up

touch 2 time multifunction button to

pause / play music

reject incoming call

touch 3 time multifunction button to

previous song

Any ear

long touch 1 time multifunction button to

call the voice command

Note: the call is supported by binaural earphones.

The shutdown, play and pause can be controlled by

multi-function touch of any connected earphone.

The other earphone will be controlled synchronously.

Warm prompt

Warm tip: in order to avoid the headset automatically

opening bluetooth connection, it is recommended that you

turn off the bluetooth device when not using the headset, so

as not to waste the battery of the headset and the device.

Matters needing attention

1. Do not treat this product with violence or squeeze it

with heavy objects from high temperature and high

humidity.

2. Stay away

from WIF1 and routers and other

high-frequency transmitting equipment, will affect the

signal reception of the machine, resulting in the sound

card and broken connection.

3. Please use this product in the effective environment

(8-15m) and blue.

There should be no physical barrier (such as wall, etc.)

between the dental device and the earphone.

4. When the charging box cover is lifted and closed, the

indicator light of the headset is not on.

This is the charging box no electricity state display, at this

time the two ears automatic boot no effect, need to

touch the boot manually.

Note: this product can be connected with any device

with bluetooth function.

The key here is

Touch control

charging port

MIC

Ear cap

Box charging port

-2-

-3-

-4-

-5-

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment

The devices has been evaluated to meet general RF exposure requirement， the device can be

used in portable exposure condition without estriction

JSY Technology(Shenzhen) Co.,Ltd

C5266091_X10_Ed.2

Date: July 20, 2021

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

Subject: Request for Confidentiality

FCC ID: 2A2N7-J55IN-EAR2

To Whom It May Concern,

Pursuant

to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following

attachment(s) as confidential document from public disclosure.

Exhibits

ID Label/Location

Attestation Statement

External Photos

Block Diagram

Schematics

Test Report

Test Setup Photos

User’s Manual

Internal Photos

Parts List / Tune Up

RF Exposure Info

Operational Description

Cover Letter(s)

SDR Software / Security Info

Long-Term

Confidentiality

No

No

No

☒

☒

Short-Term

Confidentiality NOTE 2

No

No

☐

☐

☐

No

No

☐ NOTE 1

☐ NOTE 1

☒

No

☐

No

☐

No

☐

☐

☐

☐

No

☐

No

No

NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of

KDB 726920, use last in force)

NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant.

Above mentioned document contains detailed system and equipment description are

considered as proprietary information in operation of

the equipment. The public

disclosure of above documents might be harmful to our company and would give

competitor an unfair advantage in the market.

In case of

short-term Confidentiality, the applicant requests the exhibits selected

above are withheld from public view for a period of ___45___ days from the date of

the Grant of Equipment Authorization and prior to marketing.

It is our understanding that all measurement test reports, FCC ID label format and

correspondent during certification review process cannot be granted as confidential

documents and those information will be available for public review once the grant of

equipment authorization is issued.

1/1

C5266091_X10_Ed.2

Sincerely,

Signature:

Name: Zhang Xiang

Title: Manager

1/1

Model difference declaration letter

Differences Description

We JSY Technology(Shenzhen) Co.,Ltd state:

Product：

Model Name：

Wireless earphone

ZXQ-F6,JSY-H5

J55(IN-EAR 2),IN-EAR 2, ZXQ-J55, ZXQ-F1,ZXQ-F2,

The above product with same circuit, PCB layout, electrical parts, materials and wiring

the materials of decorative accessories is same, only

structures, Appearance shape,

different color,

Signatory

Date: 07-20-2021

Signature :

Name: Zhang Xiang

Title: Manager

Company:JSY Technology(Shenzhen) Co.,Ltd

Address:No.2 Building, Zhenye Rd, Tangxiayong Village, Yanluo street, Baoan District,

Shenzhen, Guangdong, China

C5266091_X8_Ed.1 JSY Technology(Shenzhen) Co.,Ltd Company:JSY Technology(Shenzhen) Co.,Ltd Address:No.2 Building, Zhenye Rd, Tangxiayong Village, Yanluo street, Baoan District, Shenzhen, Guangdong, China Product Name:Wireless earphone ModelNumber:J55(IN-EAR 2) N-EAR 2, ZXQ-J55, ZXQ-F1,ZXQ-F2,ZXQ-F6, JSY-H5 FCC Identifier:2A2N7-J55IN-EAR2 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Zhang Xiang Date: July 20, 2021 Title: Manager Signature of applicant:

1/1