FCC ID: BXTHKM1MU GPS Tracker

Suzhou eSkywireless Inc. EK810 user manual EK810 user manual Suzhou eSkywireless Inc. http://www.eskywireless.com 0 Suzhou eSkywireless Inc. EK810 user manual Information to User This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF warning The device has been evaluated to meet general RF exposure requirement. This device should be installed in where that has no emission source and no metallic object obscures. RF Exposure Compliance The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or Transmitter. 1 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual 1 PREPARE before INSATLLATION 1.1 Product Display

(image of EK810) 1.2 Packaging Inspection Open the box, check the terminal model is correct and the accessories are complete. Otherwise, please contact your dealer. 1.3 Install SIM Card 1.3.1 The EK810 is a GPS/GPRS terminal, and it needs a LTE/GPRS SIM card. please reference dealers Selection of SIM Card opinion to select carrier. 1.3.2 Open the terminal cover,and put the metal side of SIM card face down and then fasten the card slot Installation SIM card cover. 1.4 Power On 2 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual The terminal standard power supply is 12V-36V. the red line is the positive power supply and the black line is the negative power supply. Note:

Please select the negative power line grounding alone. 2 Steps of AT Setting before tests Start hyper-terminal connection as follows. 1)select the comm port of PC through which EK810 is connected with PC, as the follows 3 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual 2) In Port Settings, change communication speed (bits per second) to 115200bps, 3)Final step is the certain AT settings necessary after 1st running of downloaded program. 3.1) Start connection first 3.2) Restart EK810 3.3) After you see the "IIII"as the following picture, start setting. 4 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual 5 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual 3 INSTALL and OPERATION 3.1 Installation Method install. Note:

The terminal is GPS positioning products, it is recommended that you follow the instructions to 1) The following installation order, please do not inverted. 2) During the installation process, please do not supply the terminal. The terminal installation is divided into hidden installation and open installation. When the terminal is using special vehicles, hidden installation is recommended. Otherwise, open installation is chosen. (To avoid thieves damage, the installation location should be hidden) 6 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual Power connector, connecting terminal with the power connector of wire harness, as picture above. Power lines, the red line is the positive power supply and the black line is the negative power supply. 3.1.1 Open Installation The power connecting line we selected is provided by original cigarette lighter cord. 3.1.2 Hidden installation The power connecting line we selected is provided by original the main power core. And the red line has a fuse box (3A fuse) which can play a short circuit overcurrent protection role. 3.2 Installation Site The places that we suggest to install:

The bottom of the front windshield decorative plates Around of front dashboard (epidermis as nonmetallic material) Below the decorative panels of rear windshield Inside the front bumper (should pay attention of water) Below the wipers plate (should pay attention of water) 3.3 Installation Notes 7 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual Avoid put together with the emission source, for example, reversing radar, anti-theft devices and other on-board communications equipment. As for fixing the terminal, you can bound with ties or stick with wide sponge strength The terminal has GSM antenna and GPS antennaso the installation should ensure that the EK810face up (that is GPS toward the sky). Besides, there is no on-metallic object that obscures If your cars windshield pasted with metal insulation layer or the heating layer, GPS receiving signal will be weakened, and it may cause GPS work abnormal. So please change the location you double-faced adhesive. above the terminal. installed the terminal. 8 http://www.eskywireless.com Suzhou eSkywireless Inc. EK810 user manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or This equipment complies with FCC radiation exposure limits set forth for an uncontrolled connected. transmitter. environment. 9 http://www.eskywireless.com

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant Date2020-07-24 Federal Communications Commission Authorization and Evaluation Division FCC ID: BXTHKM1MU Confidentiality Request Application as outlined below:

Schematics Block Diagram Operational Description 1 2 3 for this application. Sincerely, Yoshio Tamura Kaga Electronics Co.,Ltd

Kaga Electronics Co.,Ltd 3-12-8 Soto-Kanda, Chiyoda-ku Tokyo 101 Japan Japan We Name:

Address:

Country:

Declare that:

Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park , Suzhou China Product description:

Type designation: HKM-1MU Trademark:

FCC ID: BXTHKM1MU GPS Tracker KAGA 2020-07-24 Yoshio Tamura Division Director on our behalf. Date:

Name:

Function:

Signature:

Notes:

Required for FCC application

Date: 2020-07-24 Federal Communications Commission Authorization and Evaluation Division FCC ID: BXTHKM1MU ATTESTATION FCC ID: BXTHKM1MU Product: GPS Tracker Model: HKM-1MU We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Yoshio Tamura Kaga Electronics Co.,Ltd

item Name Description Part Number Manufacturerunit Placement Battery Connector 1 2 3 4 5 EK810 PCB LTE MCU IC MEMORY DC/DC FUSE Charger IC CAN LDO 6 7 8 9 10 12 ESD 13 14 G Sensor 15 17 18 19 Inductor Inductor Inductor 20 NPN 21 22 23 key Diodes P-MOS 50mm*28mm 32mm*29mm 32bits UM3204 NOR FLASH SOP8 256Mb, 3V, DC/DC 2.5A 40V 0603 3A MP2617 TJA1051T/3,SO8 LDO output 3.3V IC CAN BUS ESD SOT-323 SMD 3PIN 1.25mm BMA253 4.7UH MS42 ,1.5UH 6.8uH, 4X4X1.5mm SK34 SOT23 SIM Socket NANO-SIM Socket SNO-1305-B 16 pogo PIN 2pin, L=6mm 3.0mm HKM-1MU EK810_MB_102 EG25-G STM32F103RCT6 TPS54240 0467003NRHF MP2617BGL TJA1051T/3 1J XC6504A331MR PESD1CAN-U MX25L25645GM2I-10G MXIC Quectel ST Union TI Littlefuse MPS NXP TOREX NXP BOSCH shuofang PGC1.5-TH(6.0)-R-

2P-3.0PH MCSM52Z4R7MWTPG MCSM42Z1R5M 74404032068 MAGIC MAGIC Wurth SK34 SSF2301 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9 1 1 1 U401 U503 U402 U501 U101 F101 U102 U601 U505 ESD602 J109 U502 J701 J401 L101 L102 D102 J203 D103 Q407 NPN SOT-523 BC846AW,135 NXP Q201 Q202 Q203 Q205 Q401 Q402 Q403 Q404 Q405 19-217/R6C-

AL1M2VY/3T 19-217/Y5C-

AM1N1VY/3T 19-217/G7C-

AN1P2/3T 7U0160000120 7L32768 SJK SJK Everlight LED203 Everlight LED202 Everlight LED201 T520B227M006ATE045 KEMET GRM1555C1H100JA01D MURATA C401 C405 C508 C509 C201 C202 C402 C406 C510 C511 C701 C702 C703 GRM1555C1H220JZ01D MURATA GRM155R71H472KA01D MURATA GRM155R71H102KA01D MURATA 1 1 1 1 1 2 4 9 1 1 X502 X501 C407 C411 C105 C103 Crystal Crystal32.768KHZ 24 LED 25 LED LED 26 27 28 29 capacitor 30 capacitor 31 capacitor 32 capacitor 33 capacitor 0603 red 0603 yellow 0603 green 16MHz +/-ppm pF 3225 FC-135 32.768KHZ 20ppm 12.5pF Chip Low Profile tantalum_220 uF_ 20%_X5R_10V 10pF5% 50V 5% NP0 0402 ChipCapacitor_22 pF_5%_NPO_50 V_0402_MURATA ChipCapacitor_4700 pF_5%_50V_0402 ChipCapacitor_1.00 nF_10%_X5R_50 V_0402 ChipCapacitor_100 nF_10%_X5R_16 V_0402 34 capacitor GRM155R71C104KA88D MURATA 20 C104 C107 C110 C120 C203 C205 C213 C403 C404 C408 C409 C502 C503 C518 C520 C602 C603 C704 C801 C803 36 capacitor GRM188R61A475KE15D MURATA C108 C121 C410 C514 C601 35 capacitor 37 capacitor 38 capacitor 39 40 capacitor Inductor 41 ESD 42 ESD 43 Resistor 44 Resistor 45 Resistor GRM155R61A105KE15D MURATA C109 C412 C501 C506 C512 C515 C516 C517 C802 ChipCapacitor_1.00uF_ 10%_X5R_10V_0402 ChipCapacitor_4.70 uF_10%_X5R_10 V_0603_MURATA ChipCapacitor_4.70 uF_10%_X5R_10 V_0603 4.7UF,1206,50V. 0805 22UF 6.3V 20%

X5R 8.2nH_2%_0402 CL10A475KP8NNNC Samsung C108 C121 C410 C514 C601 GRM31CR71H475KA12L MURATA C101 D101 CL21A226MQQNNNE Samsung C106 C122 C504 LQW15AN8N2G00D MURATA C416 ICVL0518100Y500FR ICT 11 RES,0 Ohm 5%_1/10W_0402_YAGEO RES,33 Ohm 5%_1/10W_0402_YAGEO RES,120 Ohm 5%_1/8W_0805_YAGEO LXES15AAA1-133 MURATA RC0402JR-070R YAGEO RC0402JR-0733R YAGEO 15 RC0805JR-07120R YAGEO 1 R604 D104 D105 D201 D202 D204 D205 D206 D701 D702 D703 D704 D104 D105 D201 D202 D204 D205 D206 D701 D702 D703 D704 R110 R116 R122 R411 R414 R516 R801 R812 R203 R204 R303 R304 R305 R306 R308 R309 R311 R601 R602 R806 R807 R808 R809 9 5 0 2 3 1 0 8 46 Resistor RC0402JR-071K YAGEO 13 1k Ohm 5%_1/10W_0402_YAGEO 2k Ohm 5%_1/10W_0402_YAGEO 47 Resistor RC0402JR-072K YAGEO 3 R201 R208 R214 48 Resistor RC0402JR-074K7 YAGEO 21 4.7k Ohm 5%_1/10W_0402_YAGEO R114 R115 R211 R212 R215 R301 R307 R401 R501 R802 R804 R805 R810 R119 R202 R206 R209 R302 R403 R405 R408 R409 R412 R416 R418 R502 R504 R505 R506 R507 R509 R603 R813 R814 49 Resistor RES,8.2KOhm 1%_1/16W_0402_YAGEO YAGEO 1 R117 50 Resistor 51 Resistor 52 Resistor 53 Resistor 54 Resistor 55 Resistor RES,10kOhm 1%_1/16W_0402_YAGEO 15K Ohm 5%_1/10W_0402_YAGEO RES,20kOhm 5%_1/16W_0402_YAGEO RES,33kOhm 1%_1/16W_0402_YAGEO 47K Ohm 5%_1/10W_0402_YAGEO 75K Ohm 5%_1/10W_0402_YAGEO RC0402FR-0710K YAGEO R106 R108 R109 R402 R415 R514 R803 RC0402JR-0715K YAGEO R701 RC0402JR-0720K YAGEO R102 R107 R111 YAGEO R118 RC0402JR-0747K YAGEO R205 R207 R210 R404 R406 R407 R410 R417 RC0402JR-0775K YAGEO R101 7 1 3 1 8 1 56 Resistor 57 Resistor 58 59 4PIN Connector Cable 4PIN Connector 60 EK810 GPS Antenna RES,100kOhm 5%_1/16W_0402_YAGEO RES,150kOhm 1%_1/16W_0402_YAGEO EK810 4PIN Cable 4PIN DIP GPS Antenna 18*18*4mm DAA1575R18C14_EK81 0 2 5 1 1 1 J201 J202 J403 RC0402JR-07100K YAGEO R103 R105 RC0402FR-07150K YAGEO R104 R120 R121 R413 R419

TABLE OF RF BANDS CHARACTERISTICS BAND WCDMA B2 WCDMA B5 LTE-FDD B2 LTE-FDD B4 LTE-FDD B5 LTE-FDD B7 LTE-FDD B12 LTE-FDD B13 LTE-FDD B25 LTE-FDD B26 LTE-FDD B41 POWER 23.261 23.191 21.931 22.461 23.291 22.191 23.411 23.621 22.581 23.021 21.771