Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF377C Edition 1.1 Page 1 of 2 Instruction of RF377C 1. Electricalconfigurationdiagram Head up Foot up Head down Pairing M1 Massagehead FLAT Foot down Zero-G M2 Massage time Massage foot 1/3 Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF377C Edition 1.1 Page 2 of 2 2. Item 2.1 Head up Press and hold HEAD UP button of remote, head actuator moves out, stop when released 2.2 Head down Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released 2.3 Foot up Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
2.4 Foot down Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head andfoot actuators start moving;
2.5 Flat Click FLAT button, the bed goes flat, stop when click any button during the process of going flat 2.6 ZeroG Releaseafterpress,2liftsmovetoZeroGposition 2/3 Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF377C Edition 1.1 Page 2 of 2 2.7 Pairing PressHeadLift+andFootLift+keyformorethan1second,theremotewillenterpairing modeandaB_LEDwillflash.Releasethiskeytostoppairing.Afterthepairingissuccessful, B_LEDwillstopflashing. 2.8 M1 Releaseafterpress,2liftsmovetoM1position 2.9 M2 Releaseafterpress,2liftsmovetoM2position 2.10 Massagehead Turnonmassagehead 2.11 Massagefoot Turnonmassagefoot 2.12 Massagetime PresstheMassagetimekeywillturnonthemassageandchoosetimingfor10min 20min30minoff Issue DepartmentBedding Division System Instruction Date Author 2017-8-15 Instruction of RF377C Edition 1.1 Page 2 of 2 FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning:
interference, and (2) this device must accept any This device complies with Innovation,Science and Economic Development Canada licenceexemptRSS standard(s). Operation is subject to the following two conditions: (1) this devicemay not cause interference, includinginterference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi,mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.The device has been evaluated to meet general RF exposure requirement. Le matriel est conforme aux limites de dose d'exposition aux rayonnements noncs pour fac un autre environnement.ce dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf. 3/3 Massage motor FCC ID: 2AK23MC122 22406-MC122 IC:
control box Power cord AC Power Supply Foot Motor Head Motor FCC ID: 2AK23RF377C IC: 22406-RF377C