Issue departmentBedding Division Product Function Date Author 2019-10-9 Beck instruction NoRF378C USER MAUNAL Version 1.0 Page 1 of 4 Function instruction 1. Electrical configuration diagram Massage head Head lift Memory4 FLAT Massage time Massage foot Zero-G Foot lift Memory3 Memory 2 RF378C Zero-G Foot lift Head lift Memory4 FLAT Head lift FLAT Zero-G Foot lift Memory3 Memory 2 RF378A RF378B 1 Issue departmentBedding Division Product Function Date Author 2019-10-9 Beck instruction NoRF378C USER MAUNAL Version 1.0 Page 2 of 4 2. Process of test 2.1 Head Lift +
Press and maintain, head lift stretches out 2.2 Head Lift -
Press and maintain, head lift retracts 2.3 Foot Lift +
Press and maintain, foot lift stretches out 2.4 Foot Lift -
Press and maintain, foot lift retracts 2.5 FLAT Press and release the FLAT button on remotethe head and foot actuators moves to lower position(when the actuator is free, can turn off the vibration motor and turn off the indicator light when press once )stop when press any buton 2.6 Zero-G Release after press, 2 lifts move to Zero-G position 2.7 Memory2 Release after press, 2 lifts move to Memory4 position 2 Issue departmentBedding Division Product Function Date Author 2019-10-9 Beck instruction NoRF378C USER MAUNAL Version 1.0 Page 3 of 4 2.8 Memory3 Release after press, 2 lifts move to Memory3 position 2.9 Memory4 Release after press, 2 lifts move to Memory4 position 2.10 Massage head Turn on massage head 2.11 Massage foot Turn on massage foot 2.12 Massage time Press the Massage time key will turn on the massage and choose timing for 10min-20min-30min-off 2.13 Pairing Press Head Lift + and Foot Lift + key for more than 1 second, the remote will enter pairing mode and a B_ LED will flash. Release this key to stop pairing .After the pairing is successful, B_LED will stop flashing. FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3 Issue departmentBedding Division Product Function Date Author 2019-10-9 Beck instruction NoRF378C USER MAUNAL Version 1.0 Page 4 of 4 ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.The device has been evaluated to meet general RF exposure requirement. Le matriel est conforme aux limites de dose d'exposition aux rayonnements noncs pour fac un autre environnement.ce dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf. 4 RF378C FCC ID: 2AK23CU3582P IC: 22406-CU3582P FCC ID: 2AK23RF378AC IC: 22406-RF378AC