WIFI Control box UserManual Connect the WiFi box cable to the control box Multifunction interface. Connect the control box to the 120V through the power supply. 1. APP download APP name: GoSleeping You can download the APP from Apple app store and Google Play store. 2. User registration(via email) Registera new account and login. 3. Press foot-up and foot-down on the remote about 5 seconds. The buzzer will make a sound of Bee every 3 seconds. 4. Open the WiFi settings interface on the phone. Select the WiFi with the name of KeesonAp-xxxxxxxx. Wait for the WiFi connection to complete. 5. Open the GoSleeping,click the right corner button to connect a base. 6. On theConnect base interface, clickthe Connect new bed button to enter the Connect new baseinterface. 7. On the Connect new base interface, select the WiFi name that the WiFi box will connect to. Input WiFi Password, click the Connect button to enter the All bases interface. Wait for the WiFi box connect to the WiFi signal. When the WiFi box makes sound of Bee-Bee, it completes the connection. 8. Open the WiFi settings interface on the phone. Select the WiFi name that the WiFi box has connected. 9. Return to the APP, on the All bases interface, wait for a moment, the WiFi box will be found, the ID will be displayed. Click the Bind button,then select the base type, click the Confirm button tofinish the connection operation. 10. If the base is a double bed, after binding, select the side and base typeclick the Confirm button to finish the connection operation. 11. Return to the APP main interface,click the bottom left corner button to control the base. 12. Return to the APP main interface, click the central button,then click the Test to view the real time vital sign data. FAQ Now WiFi dongle only support 2.4G WiFi network. FCCStatement Any Changes or modifications not expressly approved by the party responsible for compliance could void the usersauthoritytooperatetheequipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This devicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. ISEDRSSWarning:
ThisdevicecomplieswithInnovation,ScienceandEconomicDevelopmentCanadalicenceexemptRSSstandard(s). Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevice mustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitationestautoriseauxdeuxconditionssuivantes: (1) l'appareilnedoitpasproduiredebrouillage,et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptibled'encompromettrelefonctionnement. ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte ISED fixaient un environnement non contrls.Installation et mise en uvre de ce matriel devrait avec changeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres.