FCC ID: WKZCU358 CONTROL BOX

Innovation Department Product specification Product specification CU358-4 Control BoxProduct Specification Date Author 2015.10.05 John CU358-4 Version 1 1. Product appearance chart SoftideCU358-4 control box 2. Product dimension figure Date 2015-10-05 Author John Review Approval Innovation Department Product specification Product specification CU358-4 Control BoxProduct Specification Date Author 2015.10.05 John CU358-4 Version 1 p a g e 2 / 5 3. Product Function 1Interface function specification Massage motor

(HEAD)interface

(HEAD VIBRATION) Massage motor

(FOOT)interface

(FOOT VIBRATION) Actuator LUMBARinterface Actuator TILTinterface Actuator FOOT interface Actuator HEADinterface Interface

(MULTIFUNCTION) Power cable POWER interface Date 2015-10-05 Author John Review Approval Innovation Department Product specification Product specification CU358-4 Control BoxProduct Specification Date Author 2015.10.05 John CU358-4 Version 1 p a g e 3 / 5 InterfaceHEAD:Actuator(HEAD) interface InterfaceFOOT:Actuator(FOOT) interface InterfaceTILT:Actuator (TITL)interface InterfaceLUMBAR:Actuator (LUMBAR)interface InterfaceFOOT VIBRATION:Massage motor(FOOT) interface InterfaceHEAD VIBRATION:Massage motor(HEAD) interface InterfacePOWER:Power supply interface of control boxthe power LED is near the power interface InterfaceMULTIFUNCTION:Multifunctional interfaceconnect with sync cable and external equipments such as LED,POWER DOWN BOXBluetooth and so on 2Function description of the buttons acode matchong :double click RESET button ,LED will light and enter into the state of code matching bReset :Long press RESEETbuttnenter into the state of resetthe bed lay flat 3Extended function describtion External equipment such as bluetooth connects with control box through multifunctional interface;Double click RESETbutton,the control box enter into binding state;long press RESET button,the actuator moves in,release the button, the actuator stops moving inThere are two batteries of 9V inner POWER DOWN BOX, under the state of power down of control box,long press the positive RESET button, the actuator moves in(in order to lay flat the bed), release the button, the actuator stops moving in Date 2015-10-05 Author John Review Approval Innovation Department Product specification Product specification CU358-4 Control BoxProduct Specification 4.Main requirements for product performance parameters Date Author 2015.10.05 John CU358-4 Version 1 p a g e 4 / 5 Input voltage range Output current RF frequency range RF modulation mode RF transmit power input output enxironment Work temperature Storage temperature other Protection level Flame retardant rating 18-30VDC 2A@29V 2.379~2.496GHz GFSK 0dB Indoor use

-10~40

-20~55 IP20 94V-0 5Product connection diagram Date 2015-10-05 Author John Review Approval Innovation Department Product specification Product specification CU358-4 Control BoxProduct Specification Date Author 2015.10.05 John CU358-4 Version 1 p a g e 5 / 5 6Range of application Mainly used in family or medical bed. 7Frequently asked question None 8Installation considerations To fix with screw nut, pay attention not to fold or bend when installing, overexertion will cause the breakage of the screw nut. 9Maintenance 1Non-waterproof product are not allowed to place in wet areas, and all the products cannot be washed by water but wipe by alcohol. 2The appearance is adopt plastic material with many components, which need to be handle with care install correctly. 3Comply with safety operation procedures. Do not overload the products, and eliminate unsafe factors in time. 4Operating environment and temperature: Under normal temperature. 5Relative humidity:80%

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Date 2015-10-05 Author John Review Approval