FCC ID: YMSKAEFUHRVI1G200 Coffee Brewer

Keurig v1200 Brewer Use & Care Guide Coffee

& Tea Brew Over Ice Coffee Step2 Regular Strong Tea Other Step2 Hot Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brewing H Frothing Enjoy!

OZ M PM Menu Size Add Water De-Scale Set Clock Set Auto Off Set Set On Off Time Set Set Brew Temp Set IMPORTANT SAFEGUARDS Safe Operation & Use When using electrical appliances, basic safety precautions should be followed, including the following:

1. Read all instructions before using. 2. Do not touch hot surfaces. Use handles and knobs when available. 3. This appliance must be properly installed and located in accordance with these instructions before it is used. 4. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electrical shock or injury to persons. 5. Do not place on or near a hot gas or electric burner, or in a heated oven. 6. Do not use outdoors. 7. To protect against fire, electric shock and injury do not immerse cords, plugs, or the appliance in water or any other liquid. 8. Do not overfill the Water Reservoir with water. 9. Use only water in this appliance!

Do not put any other liquids or foods in the Water Reservoir except as instructed in the Cleaning Instructions in this guide. 10. Turn off and unplug the Brewer before cleaning or maintenance. Allow to cool before putting on or taking off parts and before cleaning the appliance. 11. For best operation, plug the appliance into its own electrical outlet on a dedicated circuit to prevent flickering of lights, blowing of fuses or tripping a circuit breaker. 12. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is damaged in any manner. Contact Keurig Customer Service to report any malfunction of or damage to the Brewer. 13. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces. 14. To disconnect, press the Power Button on the Brewer to OFF status and then remove the plug from the wall outlet. 15. Close supervision is necessary when any appliance is used by or near children. 16. Do not lift the Handle to open the Brewer while brewing is in progress. 17. Always keep the Water Reservoir Lid on the Water Reservoir unless you are refilling it. 18. This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock. 19. If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. 20. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter. 21. Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. 22. Do not use the appliance for other than its intended use. CAUTION: There is extremely hot water in the Vuepack Holder during the brew process. To avoid risk of injury, do not lift the Handle or remove the Brew Head during the brewing process. Do not remove or puncture the lid of the Vue pack prior to brewing. After brewing, use caution when removing the Vuepack, as it will be hot. SHORT CORD INSTRUCTIONS: A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. Longer detachable power-supply or extension cords are available and may be used if care is exercised in their use. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance; (2) the cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally; and (3) the extension cord must include a 3-prong grounding plug. THIS PRODUCT IS FOR COMMERCIAL USE ONLY. SAve TheSe INSTRucTIoNS. WARNING THIS PRODUCT CONTAINS CHEMICALS, INCLUDING LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WARNING RISK OF FIRE OR ELECTRIC SHOCK DO NOT OPEN

!

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY. WARNING TO USERS AND PARENTS: DO NOT permit children to use Brewer unless there is adult supervision. Brewer dispenses very hot water. 2 3 Coffee

& Tea Brew Over Ice Coffee Step2 Regular Strong Tea Other Step2 Hot Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brewing H Frothing Enjoy!

OZ M PM Menu Size Add Water De-Scale Set Clock Set Auto Off Set Set On Off Time Set Set Brew Temp Set Table of Contents 6 8 10 15 18 21 22 28 Section 1 Brewer Overview Section 2 Preparing Your Brewer Section 3 Using Your Brewer with RFID Section 4 Programming Your Brewer Section 5 Caring for Your Brewer Section 6 Recycling VuePacks Section 7 Troubleshooting Section 8 Warranty Record Your Brewer Serial Number Above The serial number can be found on the bottom of the Brewer box and on the left side of the Brewer once the Water Reservoir has been removed. Removing the serial number label from the Brewer will void warranty. 4 5 SECTION 1 Brewer Overview I D H B A Coffee

& Tea Brew Over Ice Coffee Step2 Regular Strong Tea Other Step2 Hot Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brewing H Frothing Enjoy!

OZ M PM Menu Size Add Water De-Scale Set Clock Set Auto Off Set Set On Off Time Set Set Brew Temp Set C E F A BREW Button B Power Button C Touchscreen D Handle E Brew Head F Power Cord G Drip Tray H Water Reservoir I Water Reservoir Flip Top Lid G 6 7 The Keurig Vue Brewer is not for use with K-Cup packs. SECTION 2 Preparing Your Brewer SECTION 3 SECTION 3 Using Your Brewer Using Your Brewer Step 1 Step 2 Coffee

& Tea Brew Over Ice Coffee Step2 Regular Strong Tea Other Step2 Hot Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brewing H Frothing Enjoy!

OZ M PM Menu Size Add Water De-Scale Set Clock Set Auto Off Set Set On Off Time Set Set Brew Temp Set Step 3 Step 1 Remove all adhesive tape from Brewer and label from Touchscreen. Behind the Brewer is a convenient compartment to hold the Power Cord for storage. Plug cord into grounded outlet. If Brewer has been exposed to temperatures below freezing, allow Brewer at least two hours to reach room temperature before brewing. A frozen or extremely cold Brewer will not operate. Step 2 Carefully remove Water Reservoir Lid. Remove the Water Reservoir by lifting up and away from the Brewer. Rinse Water Reservoir with fresh water. Return Water Reservoir to Brewer. Fill the Water Reservoir to the max fill line. Bottled or filtered water is recommended. Place Lid on Water Reservoir. See page 16 for options for how to add water to the Water Reservoir. Step 3 Place a 10 oz. mug in center of the Drip Tray and press the Power Button. The Brewer Handle should be in the lowered position. Step 4 When the Brewer is first turned on, the Touchscreen will indicate Preheating as the Brewer heats the water. Wait until the Touchscreen indicates Lift to Brew

(about four minutes). If there is not enough water in the Water Reservoir, the Touchscreen will indicate Please Add Water. Brew what you love, the way you love it. Your new Keurig VUE V1200 Commercial Grade Brewer takes all the guesswork out of brewing the perfect beverage. The V1200 features RFID Technology. This premium brewer feature is exclusive to the Keurig Vue Commercial series. RFID technology makes sure your beverage is brewed to perfection, the way it was designed, every time. To activate the RFID Technology, make sure you place a Vue pack in the Brewer. How to use the Vue Brewer Touchscreen RFID Technology signals the brewer to automatically adjust the brewing mode based on your beverage selection. So, youll get the prefect beverage every time you brew, whether youre brewing a hot or iced beverage, coffee, tea or caf beverage. The Vue brewing system also allows you to adjust the temperature and brew strength to suit your taste. Temperature Range 188 198 Beverage Category Beverage Type Coffee

& Tea Brew Over Ice Coffee Step2 Regular Strong Tea Other Step2 Hot Cocoa Caf 2 Step Froth Step1 Caf Activated Not Ready to Brewing H Frothing Enjoy!

OZ M PM Menu Size Add Water De-Scale Set Clock Set Auto Off Set Set OnOff Time Set Set Brew Temp Set Step 4 Lift and lower the Brewer Handle, then press the flashing BREW Button. Your Brewer will dispense 8 oz. of hot water into your mug. Once complete, discard the hot water. You are ready for your first brew!

Strength Selection

(Coffee Only) 8 Beverage Size Coffee 4-18 oz. Tea/Other 6-18 oz. Hot Cocoa 6-10 oz. 9 SECTION 3 Using Your Brewer SECTION 3 Using Your Brewer Brewing Coffee, Tea, Hot Cocoa and Hot Apple Cider Brewing Over Ice Coffee Coffee

& Tea

& Tea Brew Over Ice Caf 2 Step Coffee Coffee Step2 4oz Regular Strong Tea Tea Other Other Step2 6oz Hot Hot Cocoa Cocoa Froth Step1 Caf 12 oz Not Ready to Brew H Frothing Enjoy!

OZ M PM Menu Size 8oz 10oz 12oz oz 4oz 6oz 8oz 10oz 12oz Available Sizes Choose Vue pack Make sure your Vue pack features the Coffee & Tea Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. 16 oz Select Size 18 14 oz oz After you lower the Brewer Handle, the Brewer will recognize your beverage selection and the Touchscreen will display as pictured. 14oz Select your beverage size using the + and - buttons. 16oz 18oz 6oz 8oz Coffee Choose Brew Size: Select from brew sizes of 4 oz. to 18 toz. oz oz oz Choose Strength Setting: The Strong setting gives you a more robust brew by slowly pulsing water through the 14oz Vue pack. To brew a stronger cup, simply select Strong.

(Available only for coffee.) 16oz 18oz 8oz 6oz Tea Choose Brew Size: Select from brew sizes of 6 oz. to 10 oz. Hot Cocoa Choose Brew Size: Select from brew sizes of 6 oz. to 10 oz. Press BREW & Enjoy!

Do not remove mug or lift the Brewer Handle until Enjoy appears on the screen. Remove the Vue pack after brewing is complete. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. Prepare Your Cup Fill a 16 oz. plastic cup with ice and remove the Drip Tray if necessary and place cup in the Brew head. Choose Vue pack Make sure your Vue pack features the Brew Over Ice Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. Select Size After you lower the Brewer Handle, the Brewer will recognize your beverage selection and the Touchscreen will display as pictured. Select your beverage size using the + and - buttons. Coffee Choose Brew Size: Select from brew sizes of 6 oz., 8oz, 10 oz. Choose Strength Setting: The Strong setting gives you a more robust brew by slowly pulsing water through the Vue pack. To brew a stronger cup, simply select Strong.

(Available only for coffee.) Tea Choose Brew Size: Select from brew sizes of 6 oz. to 10 oz. Press BREW & Enjoy!

Do not remove mug or lift the Brewer Handle until Enjoy appears on the screen. Remove the Vue pack after brewing is complete. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Strong Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brew H Frothing Enjoy!

OZ M PM Menu Size Available Sizes*

10 11 SECTION 3 Using Your Brewer 1 Brewing Caf Beverages Requires 2 Vue packs Step 1 Choose Caf Step 1 Vue pack Make sure your Vue pack features the Caf Step 1 Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. Step 2 Choose Caf Step 2 Vue pack Make sure your Vue pack features the Caf Step 2 Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. SECTION 3 Using Your Brewer 2 4oz 6oz 8oz 10oz 4oz 6oz 8oz 10oz Available Sizes The Touchscreen will display as pictured. 14 oz 16 oz 12 oz 18 oz Coffee Coffee

& Tea

& Tea Brew Over Ice Caf 2 Step Not Ready to Brew H Frothing Enjoy!

OZ M PM Coffee Coffee Step2 Regular Strong Tea Tea 4oz Other Other Step2 Froth Step1 6oz 8oz Menu Size Hot Hot Cocoa Cocoa Caf Froth is available in the 4 oz. brew size only. 10oz 12oz 14oz 16oz 18oz 6oz 8oz oz oz oz oz 4oz 6oz 8oz 10oz 12oz 14oz 16oz 18oz 6oz 8oz Available Sizes Press BREW After the froth is prepared, lift the Brewer Handle and carefully remove the Vue pack. Proceed to Step 2. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. 1 12 Coffee

& Tea Brew Over Ice Coffee Coffee Step2 Step2 Tea Other Step2 Regular Regular Strong Strong Hot Cocoa Caf Caf 2 Step 2 Step Froth Step1 Caf Select Beverage Strength & Size After you insert the second Vue pack and lower the Brewer Handle, the Touchscreen will display as pictured. Coffee:

Choose Brew Size: Select from brew sizes of 4 oz. or 6 oz. Choose Strength Setting: The Strong setting gives you a more robust brew by slowly pulsing water through the Vue pack. To brew a stronger cup, simply select Strong.

(Available only for coffee.) Tea/Other:

Choose Brew Size: Select from brew sizes of 4 oz. or 6 oz. Press BREW & Enjoy!

Do not remove mug or lift the Brewer Handle until Enjoy appears on the screen. Remove the Vue Pack after brewing is complete. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. Activated Frothing Enjoy!

Not Not Ready to Ready to Brew Brewing H OZ M OZ PM Menu Size Size Add Water Add Water De-Scale Set Clock Set Auto Off Set Set OnOff Time Set Set Brew Temp Set 13 SECTION 3 Using Your Brewer SECTION 4 Programming Your Brewer Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Strong Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Not Not Ready to Brew H Frothing Enjoy!

OZ M PM Menu Size Add Water Adding Water When the water supply is low, the Touchscreen will display as pictured and the Water Reservoir light will flash. Bottled or filtered water is recommended. When brewing at sizes larger than 12 oz., if the Brewer senses the water level is low, the brewing process will stop until the Water Reservoir is refilled. Once enough water has been added, the brewing process will resume. Do not remove the Water Reservoir during the brewing process. There are three options for filling the Water Reservoir:

Option 1 Remove the Water Reservoir Lid and pour water directly into the Water Reservoir. Replace the Lid. Option 2 Instead of removing the Water Reservoir Lid, you can lift the Flip Top. Pour water into the Water Reservoir. Lower the Flip Top. Option 3 You may also remove the Water Reservoir from the Brewer to fill it. Replace the Lid and return the filled Water Reservoir to the Brewer. Do not remove the Water Reservoir during the brewing process. Accessing the Settings Menu When the Brewer is first turned on, a Menu option will appear on the Touchscreen. Follow the steps below to access the settings menu. Press and hold the menu button to access. Use Menu button to tab through the setting options. Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Not Not Ready to Brew H Frothing Enjoy!

OZ M PM Menu Size Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Frothing Enjoy!

OZ M PM Brew H Menu Size Set Clock Coffee

& Tea Brew Over Ice Caf 2 Step H Menu Set Auto Off Setting the Clock Step 1 Select the Menu icon on the Touchscreen. Step 2 The H will flash, indicating you are programming the hours. Use the + and to change the hours. Press the menu button again to set the minutes. Use the + and to set the minutes. The clock is on a 12h setting and will switch to AM/

PM once the 12h mark is passed. Once the clock is set, press the Menu button to save your settings. The screen will move to the next programmable setting (Auto Off). You must set the clock if you will be using the Auto On/Off feature. Programming the Auto Off Feature You can program the Brewer to automatically turn off after a certain period of time after the last brew. This feature can be used as an energy saver. In Auto Off programming mode, use the + and icons to change the hours the Brewer will remain on after the last brew. For example, if you select 2, the Brewer will turn off two hours after the last brew. Select Off to not set the Auto Off feature. Once the feature is set, press the Menu button to save your settings. The screen will move to the next programmable setting (Set On Time see page 16). 14 15 SECTION 4 Programming Your Brewer SECTION 4 Programming Your Brewer Coffee Coffee

& Tea

& Tea Brew Over Ice Caf 2 Step Brew H FPO Tea Tea Other Other Step2 Froth Step1 Frothing Enjoy!

OZ M PM Menu Size Hot Hot Cocoa Cocoa Caf Set OnTime Coffee Coffee Step2 Regular Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Frothing Enjoy!

OZ M PM Brew H Menu Size Set Off Time Setting the Brew Temperature The Brewer has a preset temperature of 193 F. You can adjust the temperature up or down in 1-degree increments within the Brewer range (188 198 F). Once set, your beverages will be brewed at the selected temperature. At high altitudes, if boiling occurs, use the temperature adjustment to lower the temperature so that boiling does not occur. Here is how to set the brew temperature:

Step 1 In Set Brew Temp Mode, Use the + and to change the temperature. Step 2 Press the Menu button to save your setting and return to the main screen Viewing Your Presets Your settings will appear in the main menu. You can change the settings at any time, simply enter through the menu mode to re-set any options using the directions in this section. Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Frothing Enjoy!

OZ M Brew H Menu Size Set Brew Temp Set Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Frothing Enjoy!

OZ M PM Brew H Menu Size Programming the Time On Feature By programming your Brewer to turn on each morning, you will never have to wait for the Brewer to warm up to brew your first cup. It takes the Brewer approximately four minutes to warm up from room temperature. The clock must be set in order to program the on/off feature. See page 21 for directions. In Time On programming mode, the H will flash, indicating you are programming the hours. Use the + and to set the hours. Press the menu button again to set the minutes. Use the + and set the minutes. The clock is on a 12h setting and will switch to AM/PM once the 12h mark is passed. Once the Time On clock is set, press the Menu button to save your settings. The screen will move to the next programmable setting (Set Off Time). Programming the Time Off Feature By programming your Brewer to turn off each evening, will ensure the Brewer turns off each night, when it will not be used. The clock must be set in order to program the on/off feature. See page 21 for directions. In Time Off programming mode, the H will flash, indicating you are programming the hours. Use the + and to set the hours. Press the menu button again to set the minutes. Use the + and to set the minutes. The clock is on a 12h setting and will switch to AM/PM once the 12h mark is passed. Once the Time Off clock is set, press the Menu button to save your settings. The screen will move to the next programmable setting (Setting the Brew Temperature). 16 17 SECTION 5 Caring For Your Brewer SECTION 5 Caring For Your Brewer Cleaning & Maintenance CLEANING ExTERNAL PARTS Cleaning of the Brewers external parts is recommended one to two times per month. Never immerse the Brewer in water or other liquids. The Housing and other external parts may be cleaned with a soapy, damp, non-abrasive cloth. The Drip Tray can accumulate up to 13 oz. of overflow. The Drip Tray should be periodically inspected and rinsed clean. To remove the Drip Tray, simply slide it toward you, keeping it level at all times to avoid spilling. The Drip Tray should be cleaned with a soapy, damp, non-abrasive cloth. The Drip Tray should not be put in the dishwasher. CLEANING THE BREW HEAD Step 1 Lift the Brewer Handle. Step 2 Grip and press the buttons on both sides of the Brew Head and tilt it down. Step 3 Pull the Brew Head toward you to remove. Carefully clean the Brew Head with a soapy, damp, non-abrasive cloth and rinse thoroughly. The Brew Head should not be placed in the dishwasher. 1 2 3 Return the Brew Head by sliding it gently back into place until you hear a click. Lower the Brewer Handle and you are ready to brew again. CLEANING THE WATER RESERVOIR &

WATER RESERVOIR LID The Water Reservoir and Lid should not be put into the dishwasher. Clean them with a damp, soapy, non-abrasive cloth and rinse thoroughly. Do not dry the inside of the Water Reservoir with a cloth as lint may remain. CAUTION: Rinse the Water Reservoir thoroughly after cleaning to ensure that no cleaners or cleaning solutions remain in this area as they may contaminate the water supply in the Brewer. De-Scaling Your Brewer Mineral content in water varies from place to place. Depending on the mineral content of the water in your area, calcium deposits or scale may build up in your Brewer. Scale is non-toxic, but left unattended, it can hinder Brewer performance. De-scaling your Brewer helps maintain the heating system and other internal parts of the Brewer that come in contact with water. The Brewer should be de-scaled every three to six months to ensure optimal performance. It is possible for calcium deposits to build up faster, making it necessary to de-scale more often. The de-scale process requires the Brewer to stand for at least 4 hours. During this period, the Brewer should not be used to brew beverages. Prepare Step 1 To begin, you will need:

At least 48 ounces of undiluted white vinegar A large ceramic mug, at least 10 oz. (do not use a paper cup) Step 2 Empty the water in the Water Reservoir. Step 3 Disable Auto Off mode (refer to pages 15). Fill & Clean Step 1 Pour at least 48 ounces of the vinegar into the Water Reservoir. Step 2 Place the mug on the Drip Tray Plate. Lift the Handle and insert a clean, lidless Vue pack. Lower the Handle, select coffee and press BREW. The Brewer will dispense 8 oz. of hot vinegar into your mug. Dispose of the vinegar. Step 3 Repeat the process until Please Add Water is indicated. Step 4 Let the Brewer stand for at least 4 hours while still on. Step 5 Discard the remaining vinegar from the Water Reservoir and rinse the Reservoir thoroughly. Remove the empty Vue pack from the Brewer. Rinse Step 1 Ensure the Water Reservoir is filled with fresh water. Step 2 Place a large mug on the Drip Tray Plate and run a cleansing brew. Pour the contents of the large mug into the sink. Step 3 Repeat the cleansing brew process until Please Add Water is indicated. Step 4 You may need to perform additional cleansing brew cycles (refer to page 15) if you notice any residual taste. 18 19 SECTION 5 Caring For Your Brewer SECTION 6 Recycling Vue packs Recycle your Vue pack wherever #5 plastics are accepted.

#5 plastics may not be recyclable in your community today, so please check locally. Simply follow these simple steps:

Step 1 Once brewing is complete, lift the Brewer Handle and carefully remove the Vue pack by holding the outer rim. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. Step 2 Once cool, separate the base of the Vue pack by carefully pulling the tab back. Any filter will adhere to the lid. Step 3 Once separated, discard the lid and any attached filter. Recycle your Vue pack base wherever #5 plastics are accepted. #5 plastics may not be recyclable in your community today, so please check locally. What is a Cleansing Brew?

After brewing certain Vue pack varieties such as hot cocoa, iced tea or a Caf beverage, we recommend performing a cleansing brew to clear your Brewer of traces of the previous beverage. It is an easy 3-step process:

Step 1 Take a used Vue pack and peel off the lid. Discard the lid and any filter which adheres to it. Ensure the empty Vue pack is clean. Step 2 Place the EMPTY Vue pack in the Brewer and place a mug on the Drip Tray. Step 3 Lower the Handle and press BREW. The Brewer will dispense 8 oz. of hot water into your mug and cleanse the Brewer. Once complete, discard the water and carefully remove the Vue pack. The cleansing is complete. Stopping the Brewing Process If you need to stop the brewing process after it has started, press and release the Power Button to turn the Brewer off. The beverage flow will stop and the Brewer will shut off. The Vuepack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. To turn the Brewer back on, place an empty mug on the Drip Tray and press the Power Button. Since the previous brew was interrupted, some water may drip into the mug during preheating. We recommend that you perform a cleansing brew before brewing your next beverage (see above). If this is not done, the Brewer may deliver an additional amount of water for your next beverage. Dispensing Hot Water If you need hot water for cooking (instant soup or oatmeal, for example), place a cup or bowl below the Brew Head. Place your cup or bowl as far back as possible. Lift and lower the Handle WITHOUT inserting a Vue . Select Coffee (do not select Strong) and press BREW. The Brewer will dispense hot water into your cup or bowl. 20 21 21 SECTION 7 Troubleshooting SECTION 7 Troubleshooting/Vue Pack Does Not Have RFID SITUATION SOLUTION Brewer does not have power Plug Brewer into an independent outlet. Check to be sure that it is plugged in securely. Plug into a different outlet. Reset your home circuit breaker if necessary. Make sure that the Power Button has been pressed and Touchscreen is illuminated. Brewer will not brew After placing the Vue pack in the Vue pack Holder, make sure the Handle is pushed down securely and the Touchscreen displays the beverage options. Push the flashing BREW Button. If the Touchscreen indicates Please Add Water, add water to the Water Reservoir or make sure the Water Reservoir is seated properly in its base. If the Touchscreen indicates Please Add Water even after refilling, contact Customer Service at 1.866.901.BREW (2739). The Brew Head may need to be cleaned or the Brewer needs to be de-scaled (refer to pages 21 and 22). Brewer brews only a partial cup Brewer shuts off or turns on automatically Water Reservoir light is flashing The Touchscreen indicates The Brew Process Has Been Interrupted Vue pack does not have RFID 22 Clean the Brew Head if necessary (refer to page 21). The Water Reservoir may have been removed during brewing. Replace the Water Reservoir and perform cleansing brews

(refer to page 15) without a Vue pack. De-scale the Brewer (refer to page 22). If you have repeated the de-scale procedure on your Brewer two times and it is still only brewing a partial cup, contact Customer Service at 1.866.901.BREW (2739). Check to make sure that the Auto On/Off and/or Energy Saver settings have not been set. Please refer to pages 18 and 19 for instructions. The water level is low and a full cup cannot be brewed. Add water to Water Reservoir. If the water level is not low, remove the Water Reservoir, empty and refill it. Replace the Water Reservoir and wait for the Water Reservoir light to stop flashing. If the Brewer Handle has been lifted during the brewing process, this message will be displayed. Lower the Brewer Handle to resume. Please refer to pages 23-27 Vue pack Does Not Have RFID Brewing Coffee, Tea, Hot Cocoa and Hot Apple Cider Choose Vue pack Make sure your Vue pack features the Coffee & Tea Icon. Lift the Brewer Handle, insert the Vuepack into the Holder and lower the Brewer Handle. Select Beverage Type & Size After you lower the Brewer Handle, the Touchscreen will display as pictured. To make coffee, tea, hot cocoa or other beverages, such as hot cider, press the flashing Coffee/Tea icon. Once selected, the screen will flash Coffee, Tea/Other and Hot Cocoa. Choose your selected beverage. For hot cider, select Tea/Other. Select your beverage size using the + and - buttons at the bottom of the Touchscreen. Strength Selection The Strong setting gives you a more robust brew by slowly pulsing water through the Vue pack. To brew a stronger cup, simply select Strong. (Available only for coffee.) For Caf Escapes beverages, please select the Hot Cocoa setting for an optimal brew. Press BREW & Enjoy!

Do not remove mug or lift the Brewer Handle until Enjoy appears on the screen. Remove the Vue Pack after brewing is complete. The Vue Pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. Immediately after using a hot cocoa pack, we recommend running a cleansing brew to avoid clogging. See page 19 for directions. Coffee Coffee

& Tea

& Tea Brew Over Ice Caf 2 Step Not Ready to Brew H Frothing Enjoy!

OZ M PM Coffee Coffee 4oz Step2 Tea Tea 6oz Other Other Step2 Froth Step1 8oz Menu Size 10oz 12oz Regular Strong Hot Hot Cocoa Cocoa Caf 4oz 6oz 8oz 10oz 12oz Available Sizes 23 SECTION 7 Troubleshooting/Vue Pack Does Not Have RFID SECTION 7 Troubleshooting/Vue Pack Does Not Have RFID For Travel Mugs If you have an extra large travel mug, remove the Drip Tray to allow your mug to fit. For larger brew sizes, we recommend using Travel Mug Vue packs, which are designed to deliver a great tasting travel mug-sized brew. Follow the instructions for brewing a coffee (refer to page 10), but select one of the larger size options (12 oz. to 18 oz.). Note that Travel Mug beverages have been optimized at 14 oz. and 16 oz. settings. Enjoy your travel mug brew!

Coffee

& Tea Brew Over Ice Coffee Step2 Regular Strong Tea Other Step2 Hot Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brewing H Frothing Enjoy!

OZ M PM Menu Size Add Water De-Scale Set Clock Set Auto Off Set Set On Off Time Set Set Brew Temp Set Brewing Over Ice Prepare Your Cup Fill a 16 oz. plastic cup with ice. Do not use glass. Remove the Drip Tray if necessary and place cup in the Brew head. Choose Vue pack Make sure your Vue pack features the Brew Over Ice Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. Select Beverage Type & Size After you lower the Brewer Handle, the Touchscreen will display as pictured. To make an iced coffee, iced tea or iced caf beverage press the flashing Brew Over Ice icon. Once selected, the screen will flash Coffee, Tea/Other and Cafe. Choose your selected iced beverage. Select your beverage size using the + and - buttons at the bottom of the Touchscreen.

*Available sizes for Iced Caf are 6 oz. and 8 oz. Press BREW & Enjoy!

Do not remove mug or lift the Brewer Handle until Enjoy appears on the screen. Remove the Vue pack after brewing is complete. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Strong Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brew H Frothing Enjoy!

OZ M PM Menu Size 24 25 SECTION 7 Troubleshooting/Vue Pack Does Not Have RFID SECTION 7 Troubleshooting/Vue Pack Does Not Have RFID Brewing Caf Beverages Requires 2 Vue packs Brewing Caf Beverages 1 Step 1 Choose Caf Step 1 Vue pack Make sure your Vue pack features the Caf Step 1 Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. Coffee Coffee

& Tea

& Tea Brew Over Ice Coffee Coffee Step2 Regular Strong Tea Tea Other Other Step2 Hot Hot Cocoa Cocoa Caf 2 Step Froth Step1 Caf Not Ready to Brew H Frothing Enjoy!

OZ M PM Menu Size Select Caf After you lower the Brewer Handle, the Touchscreen will display as pictured. The first step in making a caf beverage is frothing. To begin, press the flashing Cafe icon. The Touchscreen will display froth. Froth is available in the 4 oz. brew size only. Press BREW & Enjoy!

After the froth is prepared, lift the Brewer Handle and carefully remove the Vue pack. The Touchscreen will display as pictured. Proceed to Step 2. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. 1 26 Step 2 Choose Caf Step 2 Vue pack Make sure your Vue pack features the Caf Step 2 Icon. Lift the Brewer Handle, insert the Vue pack into the Holder and lower the Brewer Handle. Select Beverage Type & Size After you insert the second Vue pack and lower the Brewer Handle, the Touchscreen will display as pictured. Coffee: For a coffee-based Caf beverage, select the flashing Coffee option. Strong is the default setting for caf beverages. De-select if desired. Tea: For a tea-based Caf beverage, select Tea/Other. Select your beverage size using the + and - buttons at the bottom of the Touchscreen. The amount you select will be ADDED to the existing 4 oz. of froth. Press BREW & Enjoy!

Do not remove mug or lift the Brewer Handle until Enjoy!

appears on Touchscreen. Remove the Vue pack after brewing is complete. The Vue pack will be HOT after brewing. Use caution when removing. Allow it to cool completely before handling. 2 Coffee

& Tea Brew Over Ice Caf Caf 2 Step 2 Step Coffee Coffee Step2 Step2 Tea Other Step2 4oz Froth Step1 Regular Regular Strong Strong Hot Cocoa Caf Activated Frothing Enjoy!

Not Not Ready to Ready to Brew Brewing H OZ M OZ PM Menu Size Size Add Water Add Water 8oz 6oz De-Scale Set Clock Set Auto Off Set Set OnOff Time Set Set Brew Temp Set 10oz 4oz 6oz 8oz 10oz Available Sizes 27 SECTION 8 Warranty Limited One Year Warranty US Keurig warrants that your Brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you fill out and return the warranty card enclosed with your Brewer so that your purchase information will be stored in our system. Keurig will, at its option, repair or replace the Brewer without charge upon its receipt of proof of the date of purchase. If a replacement Brewer is necessary to service this warranty, the replacement Brewer may be new or reconditioned. If a replacement Brewer is sent, a new limited one year warranty will be applied to the replacement Brewer. This warranty only applies to Brewers operated in the United States and Canada. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and, in the case of Canada, from province to province. What is not covered by the Limited Warranty?

THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces do not allow the exclusion or limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the state or province of purchase. Nor does this warranty cover damages caused by services performed by anyone other than Keurig or its authorized service providers, use of parts other than genuine Keurig parts, or external causes such as abuse, misuse, inappropriate power supply or acts of God. Other Limitations THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO YOUR V1200 BREWER, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase. How do you obtain warranty service?

Keurig Brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for warranty servicing, simply call Keurig Customer Service at our toll free phone number 1.866.901.BREW (2739). Please do not return your Brewer for servicing without first speaking to Keurig Customer Service to obtain an Authorization to Return number

(ATR). Keurig Brewers returned without an ATR number will be returned to the sender without servicing. Keurig, Incorporated 55 Walkers Brook Drive Reading, MA 01867 1.866.901.BREW (2739) Changes or modifications not expressly approved by Keurig, Incorporated could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Conformment la rglementation dIdustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit necessaire ltabissement dune communication satisfaisante. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement RF Exposure Warning To comply with FCC and Industry Canada RF radiation exposure limits for general population, this device must be installed such that a minimum separation distance of 20cm is maintained between its antenna and all persons. This device must not be collocated or operated in conjunction with any other antenna or transmitter. THIS PRODUCT IS FOR COMMERCIAL USE ONLY. 28 29 Notes 30 31 FPO Keurig, Incorporated 55 Walkers Brook Drive Reading, MA 01867 Keurig, Incorporated is a wholly-owned subsidiary of Green Mountain Coffee Roasters, Inc. For Household Use Only Made and printed in China 2011 Keurig, Incorporated All rights reserved www.keurig.com | 1.866.901.BREW P/N 60-201374-000 Rev A