PRIOR TO USAGE/CHARGING 1.Prior to using your TV headset, place It in the TV Headset Charger/Transmitter Base to charge, the TV heads does not come charged The minimum charge time Is 3 hours for a full Charge .First time use-charge for 8 hours, 2.Use the AC Adapter (Included)}to charge the headse by Plugging one end of the AC Adapter into the back of the <=
Charger/Transmitter Base and the other into the (000 electrical o outlet See Illustration on right 3.When you first place the Headset Into the Base. the charging Indicator iight will be red once the NOTE:in order for the TV Headset to work Changer/transmitter Base must to connected to the electrical outlet at all times USAGE CONNECTING CHARGER/TRAMSMTTER BASE You can connect charger/lransmilter base to your TV TONE 3 different ways. KNOB A Via AUDIO CORO 1.Plug the Audio Cord Into the Audloport
- located on the back of the charger/Transmitter Base, plug the other and (black and red)into the AUDIO OUT port located In the BACK of your TV $ee below Illustration It must be AUDIO OUT for It to work ,DO not try to plug black/red end of the cord Into the front of your TV because those ports are AUDIO In If your TV does not have at least one AUDIO OUT TV HEADSET port, use the AUDIO OUT port In the back of your cable or en satellite box VCR DVD BASE B:via HEADPHONE ADAPTER This ls a simple and quick way to connect the Charger/Transmitter Base to your TV. computer or stereo, Great when you are travelling Inmost TVS When Headphone Adapter Is used and plugged Into the TV speaker will not transmit out sonic
= ol TV C 000 loa!
1,Attach the headphone Adaptor onto the elther red or black end of the Audio Cord(See above Iilustration).plug the headphone adaptor end Into the headphone jack located on the front side of the TV 2.plug the other end of the Audio Cord Into the Audio port located on the back of the Charger/Transmitter Base, C via POWER MICROPHONE Use this option If you can not reach your AUDIO OUT port or do not have tt. CHARGING 1 Plug the power Microphone into the Audio port located INDICATOR on the back of the Charger/Transmitter Base. 2.Pee6l off the white backing of the Velcro plece to expose the adhesive, place It In the centerof the TV speaker. See above illustration 3.Set the TV volume to normal so the microphone can pick up the sound of your TV and transmit to the Headset. SIGNAL STRENGTH LIGHT The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved bythe party responsible for compliance could void the user's authority to operate the equipment."
"NOTE: The manufactureris not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the User's authority to operate the equipment.