Wireless PowerScroll NBEye Hardware Installation l. You can connect the receiver to a USB port of either a PC or Notebook. USB Port eh -. US@ battery charger cable
/ LED shows battery -
recharging status NoteBook Recharge from NoteBook Recharge from PC 2. If you want to connect receiver to PC or recharge the batteries, please using the USB battery charger Y cable. Q are 3. Install twoAAA rechargeable batteries in the mouse. OC-Jack Plug Y cable Into OC-Jack !
to recharge battery ;
Channel Button
(LED shows Channel Button | os z se data transmission) ged OC-Jack hoider |
c :
DC-Jack to recharge battery 4. Tum on your computer. 5. After you open Windows, please press the button under the receiver first and then press the button under the mouse for channel setting. Make sure each button press is for at least three seconds. 6. First time you use this product, please run out of remains then recharge the batteries at least 12 to 16 hours. Waming:
1. Please do not use Wireless PowerScroll NBEye on a desk that is made of glass, mirror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sensor could be error easily. When you use Wireless PowerScroll NBEye on a desk that is made of metal, try using a pad and reduce the receiving distance. |
2. Before the first installation is completed (channel setting ready), the mouse will not work in DOS. 3. The Wireless PowerScroll NBEye channel provides 256 ID-codes, and it automatically selects the ID # for your mouse. You can only set up one Wireless PowerSeroll NBEye at a time. But if you have additional Wireless Powerscrail NBEve sets in an area of 10 square meters, more interference will occur between the receiver and your mouse. 4. If you feel the mouse does not move smooth as usual, that the batteries have lost their charge, so please replace them or using the USB battery charger Y cable to recharging the batteries. The LED of mouses tail shows battery-recharging status from shining to die out till battery full. If you need to buy new batteries, please choose Ni-MH (Nickel-Metal-Hydride) batteries with AAA size, 550 to 700 mAH LA and 1.2 Voltages. 6. The Wireless PowerScrol] NBEye with radio frequency gives you free movement and an enjoyable experience. For optimal performance, place the receiver at least 8 inches (about 20 cm) away from the mouse and other electrical devices, such as the computer, monitor, and etc. Software Installation L. Make sure the mouse is connected to the computer. 2. Put Setup the disk (or CD) into the disk drive. 3. Follow the instructions on the screen to finish the software installation. Factory Setting _ SN Channel Button
(LED shows Magic-Roller data transmission) CE. Roller Button LED shows battery-
recharging status Left Button Magic-Roller Press the Magic-Roller to surf the Internet and Windows documents Left Button Provides traditional mouse functions such as click, double click and drag. |
Right Button You can assign this button frequently used keyboard and mouse functions in addition to features like EasyJump, Auto-Panning, Zoom, etc. Roller Button You can assign this button frequently used keyboard and mouse functions in addition to features like EasyJump, Auto-Panning, Zoom, etc. MouseMate Software Features Browsing Speed You can adjust the browsing speed when you surf the Internet or
| Windows documents. Browsing Direction Move the Magic-Roller forward and the screen will browse to the top of the document. Move it in reverse and the document will go in the opposite direction Button Find Automatically positions the cursor on the default button, usually the OK button, when the dialog box appears on your screen. Trails This option makes it easier to find the cursor when using an LCD monitor. This option cannot be used if your monitor does not support it. Loop When you move the cursor to the top (or bottom) of the screen, it will automatically move the cursor to the bottom (or top) of the screen. Mouse Speed This function lets you adjust the speed at which the pointer moves across the screen. Double Click Speed Use this function to set the double click speed of the mouse. Swap Left/Right | Select this option if you want to have the mouse operate with the right mouse button as the primary button. Pointers Folders This lets you change the shape of the cursor. Office Mode Only supports Microsoft Office 97 along with some new applications. Features include zoom, scrolling and Auto-scrolling features. Its similar to Microsofts IntelliMouse. Genius Mode Supports all applications that use scrollbars, including Office97, with zoom, Auto-panning, and scrolling functions. About Click here to open the Genius Homepage www.geniusnet.com.tw Orientation This function lets you set the angle when you move the mouse upward. 2 It gives you a more comfortable angle when holding the mouse. 11s he function works best with a portable trackball. EasyJump for Windows . EasyJump lets you open eight special functions quickly. inlernat Access Start Close AP Close the application you are using. Horizontal Moves the cursor to the horizontal scroll bar. Vertical Moves the cursor to the vertical scroll bar. Start Activates the Windows Start menu. |
Internet Access This function opens Browser to access the Internet. Help This opens the Help menu. Control Panel Opens the mouse control panel. Auto-Panning Move the mouse, and the document will move in the direction you move the mouse. Switch Applications When the right-button or Magic-Roller 1s set to Switch AP, you can quickly switch from one open application to another without moving the mouse. To switch to a specific application, press the the right button or the Magic-Roller to select the application. |
Zoom function for Office and IE Applications Press the Ctrl key and move the Magic-Roller forward (or backward) to set the Zoom In/Out function. You can also use just one hand to Zoom In/Out: set the right button to be the Ctrl function, press the right button and move the Magic-Roller forward (or backward) to enlarge (or decrease) the document window. |
Auto-Panning You can set this function in the Button Assignment menu. Move the mouse, and the document moves in the direction you just moved. Uninstall the software Follow these instructions to remove the software from your hard disk. In Windows 95/98/NT, click on the Start button, select Programs ai and move to the mouse software. Then click on Uninstall software. Customize the software This section shows you how to customize the software. To open the software control panel, you can double-click on the icon in the task bar or select the software icon from the program group. Close the Software Click the right button on the taskbar, and select Close the software to close the software
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that _may cause undesired operation. Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment.