Ultra Thin Fabric Wireless Charging Pad Instruction Manual 7141-83 INSTRUCTIONS:
1. Wireless Charging Function:
Once connected the LED indicator will 5. 6. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the 7. Do not use the device if damaged or is in standby mode and is ready to begin charging. Place the wireless charging supported device on the charging surface(1),the device will begin to charge automatically.
(LED will glow WHITE when device is charging). Note: When wireless charging, if the LED
**
NOT a wireless charging device or there is an object between the device and charging surface interfering with the charging process. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
(1)
(2) 8. 9. 10. 11. 12. explosion or risk of injury. Do not disassemble the device. For repairs, Incorrect reassembly may result in a risk of
*
Warning:
or temperatures above 104F (40C) may result in explosion. To ensure product safety, ensure that identical replacement parts. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. You must remove attachments from the phone before charging on this device. approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MADE IN CHINA Features:
Wireless Charging Surface 1. USB Input Cable 2. Whats included:
1 x Wireless Charging Pad 1 x Instruction Manual Input power: 5V/1.5A Wireless Charging Output: 5V/1A 1. 2. 3. 4. SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F (0C) or above 115F (45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is used near children.