Contents ENGLISH Introduction ...........................................................A1 Connecting the Monitor.........................................A2 Location and Function of Controls........................A3 Control Panel Function ..........................................A4 On Screen Display (OSD) Control Adjustment ....A5 On Screen Display(OSD) Selection and Adjustment .....................................................A6 Video Memory Modes ...........................................A8 Troubleshooting .....................................................A9 Specifications .......................................................A10 DEUTSCH Einleitung................................................................B1 Anschlieen ............................................................B2 Ort und Funktion der Bedienungselemente ..........B3 Bedienungselemente der Bildkontrolle..................B4 On Screen Display (OSD) Anpassung ...................B5 OSD Einstellung und Auswahlsymbole .................B6 Videospeichermodi ................................................B8 Strungen................................................................B9 Produktbeschreibung ...........................................B10 FRANAIS Introduction ...........................................................C1 Branchement du Moniteur ....................................C2 Nomenclature et Fonctions ...................................C3 Fonctions du Paneau de Commande.....................C4 Rglage des Commandes Affichage cran.............C5 Options de slection et de Rglage OSD (affichage cran) ..........................................C6 Mise en Mmoire de Modes Vido........................C8 Quelques Conseils en Cas Dincident....................C9 Spcifications D'entree........................................C10 ITALIANO Introduzione ..........................................................D1 Collegamento del Monitor ....................................D2 Posizione e Funzione dei Conando di Controllo ..D3 Funzione del Pannello di Controllo.......................D4 Controllo Regolazione On Screen Display (OSD)....D5 Elementi di Selezione e Regolazione dell'OSD.....D6 Modalit di Memoria Video ..................................D8 In Caso di Problemi ...............................................D9 Specifiche.............................................................D10 ESPAOL Introduccin ...........................................................E1 Conectando del Monitor ........................................E2 Ubicacion y Funcion de los Controles ...................E3 Funcin del Panel de Control.................................E4 Ajuste del Control de Exhibicin en Pantalla (OSD).......E5 Ajuste del OSD y Seleccin de Elementos .............E6 Modos de Memoria de Video.................................E8 Sugerencias para Localizar las Fallas......................E9 Especificaciones....................................................E10 PORTUGUS Introduo...............................................................F1 Conectando o Monitor ...........................................F2 Posio dos Controles e Descrio ........................F3 Funes do Painel de Controle ..............................F4 Ajuste On Screen Display(OSD) ............................F5 Ajustes OSD e Itens de Seleo .............................F6 Modos de Memria de Vdeo.................................F8 Resolvendo Problemas............................................F9 Especificaes .......................................................F10 NEDERLANDS Inleiding .................................................................N1 De Monitor Aansluiten..........................................N2 De plaatsing en de werking van de knoppen........N3 Het bedieningspaneel ............................................N4 Bediening via het beeldscherm OSD
(On Screen Display) ..............................................N5 Kiezen en instellen via het OSD-systeem..............N6 Modi voor videogeheugen.....................................N8 Problemen oplossen...............................................N9 Specificaties .........................................................N10 Introduction The FLATRON LCD 563LE/LS Flat Panel Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features I H S L G N E The FLATRON LCD 563LE/LS is a 15.1-inch (15.1 inches viewable) intelligent micropro-cessor based monitor. Digitally controlled auto-scanning is done with the microprocessor for horizontal scan frequencies between 31 and 61kHz, and vertical scan frequencies between 56 and 75Hz. The microprocessor-based digital controls allow you to adjust conveniently a variety of image controls by using the OSD (On Screen Display). It supports resolutions up to 1024x768, and has a wide viewing angle of 60 degrees horizontal and 45 degrees vertical. The monitor is shipped with 14 factory pre-programmed video modes that are permanently resident. In addition, there are 16 user-storable modes, for a total of 30 memory modes. Plug and play capability if supported by your system. This monitor has DDC 2B function.*
Compliant with the following regulated specifications :*
- EPA ENERGY STAR
- Swedish TCO99
*For detailed information, please refer to the Reference Guide provided . A1 Connecting the Monitor On the back of the monitor are two plug-in connections; one for the AC power cord, and the other for the signal cable from the video card. 1 2 2'
3 4 5 6 Power off both the monitor and PC. Connect the 15 pin VGA connector of the supplied signal cable to the output VGA video connector on the PC and the matching input connector on the rear of the monitor. The connectors will mate only one way. If you cannot attach the cable easily, turn the connector upside down and try again. When mated, tighten the thumbscrews to secure the connection. Locate the appropriate MAC to VGA adapter block at your local computer store. This adapter changes the high density 3 row 15 pin VGA connector to the correct 15 pin 2 row connection to mate with your MAC. Attach the other end of the signal cable to the side of the adapter block with 3 rows. Connect the attached adapter block/signal cable to the video output on your MAC. Connect the plug from the AC-DC adapter into the connector on the display unit. Plug the other end into a properly grounded three-prong AC outlet. Connect one end of the AC power cord into the AC-DC adapter. 3 2 1 Power on the PC, then the monitor. If you see the NO SIGNAL message, check the signal cable and connectors. After using the system, power off the monitor, then the PC. IBM PC MACINTOSH D-15P 2 Mac Adapter D-15P 2'
1 Signal Cable 2 AC-DC adapter
* NOTE : If you see the OUT OF RANGE message, check to make sure your system is set to one of the factory preset modes.(see page A8) A2 3 Power Cord Location and Function of Controls Front View OSD Button OSD AUTO/SET Buttons Power Indicator Power Button AUTO/SET Button Rear View ID Label D-Sub Signal Connecter DC Power Connecter
A3 Control Panel Function Front Panel Controls OSD Button Buttons OSD AUTO/SET Power Button Control OSD OSD Button Buttons 100 100 AUTO/SET AUTO/SET Button PROCESSING AUTO CONFIGURATION Power (DPMS) Indicator AUTO/SET Button Power (DPMS) Indicator Function Use this button to enter and from the on screen display (OSD). Use these buttons to choose or adjust items in the on screen display.
<Shortcut Keys>
Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) system. Touch the buttons to adjust the settings and then the OSD button to save all changes. The Brightness and Contrast functions are also available in the On Screen Display (OSD) menu. Use this button to enter a selection in the on screen display.
* AUTO adjustment function Touch the AUTO/SET button before using OSD menu. This button is for the automatic adjustment of the screen position, clock and phase. Note: Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitors Position, Clock and Phase manually. This indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode (stand-by/
suspend/power off), this indicator color changes to amber. Power Button Use this button to turn the monitor on or off. A4 On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the monitor to stabilize for at least 30 minutes before making image adjustment. To make adjustments in the On Screen Display, follow these steps:
OSD AUTO/SET OSD AUTO/SET Press the OSD Button, then the main menu of the OSD appears. To access a control, use the Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the AUTO/SET Button. Exit the OSD by Pressing the OSD Button. 1 1 11 1 1 2 22 2 2 2 3 3 3 3 33 4 4 4 44 4 55 5 5 5 5 6 6 6 6 6 7 7 7 7 7 A5 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description BRIGHTNESS CONTRAST 88 100 Brightness Used to adjust the brightness of the screen. Contrast Adjust the display to the contrast desired. COLOR PRESET 9300K 6500K PRESET RED GREEN BLUE 9300K/ 6500K To appear the displays color temperature. 9300K:Slightly bluish white. 6500K:Slightly reddish white. RED To set your own color levels. GREEN To set your own color levels. BLUE To set your own color levels. POSITION 61 39 Vertical Position To move image up and down. Horizontal Position To move picture image left and right. A6 On Screen Display(OSD) Selection and Adjustment OSD Adjust Description TRACKING CLOCK CLOCK PHASE To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. SETUP LANGUAGE OSD POSITION ELAPSED TIME 48.3kHz / 60.0Hz PRESET MODE PHASE To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. LANGUAGE To choose the language in which the control names are displayed. ENGLISH H0 OSD POSITION To adjust position of the OSD window on the screen. ELAPSED TIME To display the use time of monitor A7 Video Memory Modes The monitor has 30 memory locations for display modes, 14 of which are factory preset to popular video modes. Display Modes (Resolution) Display Modes (Resolution) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 VGA VGA VGA MAC VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA Horizontal Freq.(kHz) Vertical Freq.(Hz) 31.47 31.47 31.47 35.00 37.86 37.50 35.16 37.88 48.08 46.88 49.72 48.36 56.48 60.02 70 70 60 67 73 75 56 60 72 75 75 60 70 75 Note : This LCD monitor has been pre-adjusted to the video mode of VESA 1024x768 @75Hz. User Modes Modes 15-30 are empty and can accept new video data. If the monitor detects a new video mode that has not been present before or is not one of the preset modes, it stores the new mode automatically in one of the empty modes starting with mode 15. If you use up the 16 blank modes and still have more new video modes, the monitor replaces the information in the user modes starting with mode 15. A8 Troubleshooting Check the following before calling for service. Display Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible. Push the AUTO/SET Button. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. Any horizontal noise appearing in any image or characters are not clearly portraid. Push the AUTO/SET Button. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. NO SIGNAL message. The signal cable is not connected, or is loose. Check and secure the connection. OUT OF RANGE message appears. Picture is blank. The frequency of the signal from the video card is outside the operating range of the monitor. Horizontal Frequency: 31kHz-61kHz Vertical Frequency: 56Hz-75Hz
* Use the graphics board's utility software to change the frequency setting (Refer to the manual for graphics board).
*You can change the setup to the supported resolution using the Safe Mode (Press the F8 key during booting the system). The power LED is illuminated amber. The monitor is in its display power management mode. There is no active signal coming from the PC. The signal cable is not fastened securely. Check the computer power and graphics adapter configuration. The monitor doesn't enter the power saving off mode (Amber). Computer video signal is not VESA DPMS standard. Either the PC or the video controller card is not using the VESA DPMS power management function. A9 Specifications Display Type Viewable Size Pixel pitch True color 15.1inch (38.35cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating 15.1inch (38.35cm) 0.3 x 0.3mm FLATRON LCD 563LE : 16, 7 million color FLATRON LCD 563LS : 262, 144 color Sync Input Video Input Power Consumption Dimensions Power Input AC-DC Adapter Weight Tilt Range Environmental Conditions Horizontal Freq. 31 - 61kHz (Automatic) 56 - 75Hz (Automatic) Vertical Freq. Separate TTL, Positive/Negative Input Form 15 pin D-Sub Connector Signal Input 307 x 230mm / 12.1 x 9.1inch Display Area Separate, RGB Analog, 0.714Vp-p/75ohm, Positive Input Form VESA 1024 x 768/ 75Hz max Resolution 30W Normal Stand-by/Suspend 3W 3W Power Off 38.92 cm / 15.95 inches Width 36.16 cm / 14.24 inches Height 18.24 cm / 7.18 inches Depth DC 12V 3A AC 100-240V 50-60Hz 1.2A~0.6A Input DC 12V 1.5A Output 5.2 kg (11.46 lbs) Net 5 Down 30 Up Operating Condition Temperature Humidity Storage Condition Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing
-20 C to 60 C 5 % to 95 % non-Condensing
NOTE Information in this document is subject to change without notice. A10