all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.25 MiB | June 05 2003 | |||
1 | Attestation Statements | June 05 2003 | ||||||
1 | Block Diagram | June 05 2003 | ||||||
1 | External Photos | June 05 2003 | ||||||
1 | ID Label/Location Info | June 05 2003 | ||||||
1 | Internal Photos | June 05 2003 | ||||||
1 | Test Report | June 05 2003 | ||||||
1 | Test Report | June 05 2003 | ||||||
1 | Test Setup Photos | June 05 2003 |
1 | Users Manual | Users Manual | 1.25 MiB | June 05 2003 |
Dell 1800FP Monitor User's Guide HIOIAL 1/1 Dell 1800FP Color Monitor User's Guide http://www.dell.com Delf and the DELL logo are tradernarks of Dell Computer Corporation file://E-WMONITOR.HTM 03-04-28 Contents: Dell 1800FP Color Monitor User's Guide HIOLAl 1/1 Dell 1800FP Color Display User's Guide Preface Safety Instructions Introduction Setup Using the Display Troubleshooting Specifications Regulatory Notices Limited Warranties Documentation Information in this document is subject to change without notice. 2002 Dell Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Def and the DELL logo are trademarks of Dell Computer Corporation; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; VESA is a registered trademark of Video Electronics Standards Association; {BM is a registered trademark of International Business Machines Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. As an ENERGY STAR Partner, Deli Computer Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entitles claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. Initial release:05/13/2002 file://E:WEnglishWindex.htm 03-04-28 Preface: Dell 1800FP Colo: Monitor User's Guide HOA 1/14 Back to Contents Page Preface: Dell 1800FP Color Display User's Guide About This Guide Notational Conventions About This Guide This guide is intended for anyone who uses the Dell 1800FP Color Display. It describes the display's features, setup, and operation. The sections are as follows:
Safety Instructions lists safety information. Introduction gives an overview of the display's features and provides an orientation to the display. Using the Display gives an overview of how to use the display. Troubleshooting provides tips and solutions for common problems. Specifications lists the technical specifications of the display. Regulatory lists regulatory certifications and notices. Limited Warranty describes the warranty information for this product. Documentation provides acditional documentation that supports this product. Notational Conventions. The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bald type or in italic type. These blocks are notes, cautions, and wamings, and they are used as follows:
Y NOTE: A NOTE indicates important information that helps you make better use of your computer system. f\ CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells
> you how to avoid the problem. aA WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority. Back to Contents Page file: //E:WEnglishWpreface.htm 03-04-28 Safety Instructions: Dell 1800FP Color Monitor User's Guide HIOIAl 1/4 Back to Contents Page Safety Instructions: Dell 1800FP Color Display User's Guide WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer display:
e Tohelp avoid damaging your computer, be sure that the voltage selection switch on the power supply is set to match the alternating current (AC) power available at your location:
115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea, and Taiwan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East Also be sure that your disolay is electrically rated to operate with the AC power available in your location. Never insert anything metallic into the display openings. Doing so may create the danger of electric shock, To avoid electric shock, never touch the inside of the display. Only a qualified technician should open the displays case. Never use your display if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep the cable away from where people could trip over it. e Be sure to hold the plug, not the cable, when disconnecting the display from an electric socket. Openings in the display cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the display on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the display in a bookcase or some other enclosed space, be sure ta provide adequate ventilation. e Put your display in a location with low humidity and a minimum of dust. Avoid places like damp basement or dusty hallways. e Do not expose the display to rain or use it near water (in kitchens, next to swimming pools, etc.). If the display accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the display with a damp cloth when necessary, but be sure to unplug the display first. e Place the display on a solic surface and treat it carefully. The screen is made of glass and can be damaged if dropped or sharply hit. Locate your display near an easily accessible electric outlet. e If your display does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. e Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back caver should only be removed by qualified service personnel. e High temperatures can cause problems. Don't use your display in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat. e Unplug the display when it is going to be left unused for an extended period of time. e Unplug your display from the electric outlet before any service. Back to Contents Page file://E:WEnglishWsafety.htm 03-04-28 Intro: Dell 1800FP Color Monitor User's Guide HOlAL 1/1 Back to Contents Page Introduction: Dell 1800FP Color Display User's Guide Overview * Graphics Overview Thank you for purchasing the Dell 1800FP Flat Panel color display. The 1800FP utilizes an 18.1-inch (45.9 om) Active Matrix TFT LCD that displays brilliant images of text and graphics with a maximum resolution up to 1280 x 1024 pixels. This display is optimal for desktop publishing, spreadsheets, multimedia, and other applications that demand large screen size and high resolution. The Dell 1800FP was designed for a wide variety of users ranging from the home to corporate or financial trading environments. Those who require exceptional quality and reliability at an affordable price will appreciate the value that the Dell 1800FP. provides. For more details see Specifications Section. Graphics The following links show various views of the display and its components. Front View Back View Bottom View Side View Back toe Contents Page file://E-WEnglishWintro.htm 03-04-28 Back to Contents Page Specifications: Dell 1800FP Color Display User's Guide Genocal Fiat Panel Resalvtn Preset Display Modes + Electcal Pnysical Cherectorissics + Environmental Power Monagomen: Modes Pin Assignments ug and Pay Capabilty Genoral Model number B00FP Flat Panel Screen ype Active matro- TET LCD, Sereen demensions Diagonal 18.1 inches (458.7 men) Horizontal 14.14 intos (389.04 mm) Vertical 11:31 Inches (287.23 mm) Pel pitch (0.2808 mm Viewing angle +180" (verioal ical, +80" (horzontal typical Luminance output 250 GDI typical, 200 CDIm# minimum Contrast rato 350101 typical, 200 to 1 minimum LD surface coating Hardness 3H, aniglae treatment Backlit SCOFL ype Resolution Hofzonta scan range Analog: 31 -80 kHz (automatic) Digtar 31 7OkHz (automatic) Vertical scan range 55 He to 76H (automatic) Optimal preset resoution 1200 x 1024 al 60 He Highest preset resolution 1280 x 1024 al 75 He Del guarantees image size and centering for al preset modes lsd in the following table Preset Display Modes Hortzontal Vorticat Pbvel Clock Display Mode Frequency (kHz) | Frequency (Hz) Syne Polarity
(Horizontal /
Vertical vues | ea Specifications: Dell 1800FP Color Monitor User's Guide HOA) 2/6
| VGA, 640x480 31.469 \ 60 25.175 -
IVESA, 640x480 | 37.500 | 75 , a8 - -_
| VESA, 800 x 600 37.879 | 60 40.0 YS
[ Vesa, 800 x 600 | 46.875 m6 | 45 |. +
| VESA, 1024 x 768 48.363 60 85.0 _ -
VESA, 1024 x 768 60.123 75 78.75 -
a : | e |
MAC, 1162 x 864 67.5 75 108.0 | +
VESA, 1280 x 1024 | 63.981 80 080 + -
;VESA, 1280 x 1024(Analog | 79.978 5 135.0 +
| D-sub only) i Electrical Video input signals Analog RGB, 0.7 Voits +/-5%, 75 ohm input impedance Digital DVI-D TMDS, 600mV for each differential fine, 50 ohm input impedance Synchronization input signals AC input voltage / frequency / current Inrush current at 120 V Inrush current at 220 V Physical Characteristics Connector type Signal cable type Dimensions:(with stand) Height Width Depth Weight (display only) Weight (with packaging) file://E-WEnglishWspecs.htm separate horizontal and vertical;
3.3V Cmos or 5V TTL level, positive or negative sync. Sync on Green Composite Sync AC 100-240V 50/60 Hz 1.0 (RMS) max 30 A max 50 A max 15-pin D-subminiature; DVI-D Detachable 16.97inches (431mm ) 15.98inches (406mm ) 8.78inches (223mm ) 17.19 lb (7.8 kg) 22.08 Ib (10 kg }
03-04-28 Specifications: Dell 1800FP Color Monitor User's Guide Environmental Temperature:
Operating Nonoperating Humidity:
Operating Nonoperating Altitude:
Operating Nonoperating Thermal dissipation Power Management Modes 41 to 95F (5 to 35 C)
-4 to 140F (-20 to 60C }
10% to 80% (noncondensing) 5% to 95% (noncondensing) 3,048 m (12,000 ft) 12,192 m (40,000 ft) 243 BTU/hour (maximum) 205 BTU/hour (typical) HIOIA 3/6 If you have a VESA DPMS compliant display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. {f input from keyboard, mouse or other input devices is detected, the display will automatically "wake up. The following tabie shows the power consumption and signaling of this automatic power saving feature:
r Power Management Definition VESA's Mode Video H-syne V-sync Power Used Power Saving LED color maximum 55W ON Active Yes Yes Green normal SOW Stand-by Blanked No Yes <3W >90% Amber Suspend Blanked Yes No <3W >90% Amber 7 Active-Off* Blanked No No s3Ww >90% Amber Power Off
(120VAC) -- -- -- <1W >9B% Off file://E:WEnglishWspecs.htm 03-04-28 Specifications: Dell 1800FP Color Monitor User's Guide This display is ENERGY STAR-compliant . Holz 4/6
* Zero power consumption in OFF mode can only be achieved by disconnecting the mains cable from the display. ENERGY STAR@ is a U.S. registered mark. As an ENERGY STAR Partner, DELL has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Pin Assignments 15-pin D-sub connector 1 5 6 10 11 15 i Pin Number ; 15-Pin Side of the Signal Cable
: 4 H Video-Red 2 Video-Green 3 "| Video-Blue -
4! GND 5 _ Self-test 6 (GNDR eee 7 GND ee 8 : | GND-B ig. _ ry Supply :
i
[10 | GND-synco 7 "GND -
i |
m2 : SDA oo OO 43 | Hesyne "
: 14 i V-syne 7 _ 5 scl. 24 pin DVI-D connector file://E-WEnglishWspecs.htm 03-04-28 Specifications: Dell 800FP Color Monitor User's Guide r Pin Number 24-Pin Side of the Signal Cable 4 TMDS Data2-
2 I TMDS Data2+
aa
| TMDS Data 2/4 Shield
| TMDS Datad-
| TMs Datad+
Tope clock
- ~ DDG Data -
i Analog Vertical Sync oO TMDS Datal- a ITMDS Datal+
~ [TMDs Data 1/3 Shield
"| TMDs Data3- ;
_ TMDS Data3+ oO
[140 - +5V Power "
15 Ground(Return for +5V, H sync
| and V sync}
i146 ~~ | Hot Plug Detect
[17 : "| TMDS Data 0-
we 00S IMDS Datal+ re
[19 ~ TMDS Data 0/5 Shield -
20 TMDS Data 5- -
24 MDS Datas+ a
[22 [TMS Clock Shisld SS
(23. ~*~<C**TIS lc _ 24 TMDS Clock- EE Plug and Play Capability HIOIA 5/6 You can install the display in any Plug and Play-compatible system. The display automatically provides the computer system with its Extended Display identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the dis;
play settings. If desired, the user can select different settings. file://E:WEnglishWspecs.htm 03-04-28 Front View: Dell 1800FP Color Monitor User's Guide Back to Contents Page Front View: Dell 1800FP Color Display User's Guide A. Input selection button B. Menu buttons
C. Up/down arrow buttons
/ of xt 4 D. Left/Right arrow buttons file://E:WEnglishWfront.htm Use this button to make Dsub or DVI connector active. This feature is used when two computers are connected to the display. The default setting is Dsub. Use this button to enter or exit the On Screen Display. Select between OSD items and activates Hot key"
function for brightness adjustment. Use these buttons to choose or adjust items in the On Screen Display and activates Hot Key function for HOI 1/2 03-04-28 Front View: Dell 1800FP Color Monitor User's Guide HIO|AL 2/2
@ @ contrast adjustment. '
ug -
one
| - Use this button to enter a selection in the On Screen Display.
@ + Automatically adjust vertical position, horizontal position, pixel clock and phase. 3 "
i Turn the display on/off and indicate the status of power
| management.
| E. Select/Auto button :
i Back to Contents Page file://E-WEnglishWfront.htm 03-04-28 Back View: Dell 1800FP Color Monitor User's Guide HIOIAL 1/1 Back to Contents Page Back View: Dell 1800FP Color Display User's Guide 1.Power connector 2.15-pin D-sub input 3.DVI-D digital input 4. Kensington lock Back to Contents Page file: //E-WEnglishWbackvw.htm 03-04-28 Bottom View: Dell 1800FP Color Monitor User's Guide HIOIAL 1/4 Back to Contents Page Bottom View: Dell 1800FP Color Display User's Guide sc The base is attached when the display is shipped and can be removed. Back to Contents Page file://E:WEnglishWbottom.htm 03-04-28 Side View: Dell 1800FP Color Monitor User's Guide HOA 1/4
, Back to Contents Page Side View: Dell 1800FP Color Display User's Guide Back to Contents Page file://E:WEnglishWside.htm 03-04-28 Setup: Dell 1800FP Color Monitor User's Guide HOLA 1/1 Back to Contents Page Setup: Dell 1800FP Color Display User's Guide Tilt/Swivel Base Attaching the Cables Positioning the Display Maintenance Back to Contents Page file://E:WEnglishWsetup.htm 03-04-28 Tilt/Swivel Base: Dell 1800FP Color Monitor User's Guide HOI 1/4 Back to Contents Page Tilt/Swivel Base: Dell 1800FP Color Display User's Guide Tilt/Swive! Base With the Tilt? Swivel base, you can tilt and/or swivel the display for the most comfortable viewing angle. ies NOTE: The removable base is attached when the display is shipped. Back ta Contents Page file: //E:wEnglishWtiltswiv.htm 03-04-28 Attaching the Cables: Dell 1800FP Color Monitor User's Guide HIOIA 1/14 Back to Contents Page Attaching the Cables: Dell 1800FP Color Display User's Guide Cable Connections On Back of Display and Computer 1. Turn off your computer and unplug its power cable. 2. Connect either the white (digital DVI-D) or the blue (analog D-SUB) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. (The graphics are for illustration only. System appearance may vary). 3. Connect the power cable for your display to the power plug on the back of the display. 4. Plug the power cables of your computer and your display into a nearby outlet. Turn on your display and computer. If your display displays an image, installation is complete. If it does not display an image, see Troubleshooting. Back to Contents Page file: //E3wWEnglishWattach.htm 03-04-28 Position: Dell 1800FP Color Monitor User's Guide HOIA 1/1 Back to Contents Page Positioning the Display: Dell 1800FP Color Display User's Guide Consider the following environmental factors when you are deciding how to position the display:
e Remove all electronic devices such as radios, fans, clocks, and telephones that are within 3 feet away of the display. Back to Contents Page file://EWEnglishWposition.htm 03-04-28 Maintenance: Dell 1800FP Color Monitor User's Guide IOIAL 1/14 Back to Contents Page Maintenance: Dell 1800FP Color Display User's Guide a WARNING: To avoid risk of electric shock, do not disassemble the display cabinet. Users cannat service the display. User maintenance is restricted to cleaning. XZ NOTE: Before cleaning the display, unplug it from the electrical outlet. To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. To clean your Midnight Gray display cabinet, avoid using detergent of any kind. Detergent leaves a milky film on plastics; particularly the darker colored ones. It is best to use a lightly water dampened warm cloth to clean the cabinet. White powder substance, due to shipping, may appear on the piastic or near bezel edge. If you observe this, simply wipe it off. e Darker color plastics may scratch and shows white scuff marks more than lighter-colored display. Handle your Midnight Gray display with care. Back to Contents Page file://EwWEnglishWmaintain.htm 03-04-28 Optimal Resolution: Dell 1800FP Color Monitor User's Guide HOIAL 1/1 Back to Contents Page Setting the Optimal Resolution: Dell 1800FP Color Display User's Guide For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1280 x 1024 pixels by perfarming the following steps:
J. Right-click in a blank area of the desktop (any part of the screen where there are no icons) and click on Properties 2. Click the Settings tab. 3. In the Resolution area, move the slidebar to 1280 by 1024 pixels. Then click OK. Back to Contents Page file://E:wEnglisnWoptres.htm 03-04-28 Controls: Dell 1800FP Color Monitor User's Guide HOLA 1/7 Back to Contents Page Controls and Indicators: Dell 1800FP Color Display User's Guide Overview Use the control buttons on the front of the display to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an on-screen display (OSD) shows their numeric values as they change. a ae - .
! Use this button to make D-sub or DVI connector active. This feature is used when
\A. Input selection button
| two computers are connected to the display. The default setting is D-sub. 9 B. Menu button Use this button to enter or exit the On Screen Display. See access the Menu
| system.
| C. Up/down arrow buttons | Selects between OSD items and activates the "Hot key" function for the brightness i j adjustment. a@
uA i
i
| oe a
| D. Left/Right arrow buttons Chooses or adjusts items in the On Screen Display and activates Hot Key function
| | for the contrast adjustment.
I
file://E:WEnglishWeontrols.htm 03-04-28 Controls: Dell 1800FP Color Monitor User's Guide WiO| Xl 2/7
@2 !
| ga i
| E. Select/Auto button | Automatically adjust vertical position, horizontal position, pixel clock and phase. For
| best results, use this button when there is a full screen of detailed information, such
| : as fine text. The following dialog will appear as the display self-adjusts to the current
| @ i input:
eS PROCESSING AUTO CONFIGURATION
! : See Auto adjustment.
| Sy Note: Auto Adjust will not occur if you press the button while there are no active video input signals, or attached cables. Auto adjustment will also not function in the DVI mode. This is normal. F. Power button and LED indicator | Turn the display on/off and indicate the status of power management. The power indicator lights steady green while the display function normally. The LED is steady
@ amber for DPMS. See Power management mode. On Screen Display (OSD) Menu System Direct-Access Functions
| Function Adjustment Method ~
Auto adjustment: Even though your computer system can recognize your new flat panel display on startup, the Auto Adjustment function will optimize the display settings for use with your particular analog D-sub graphics adapter. Auto Adjustment can be
| accessed through the OSD via the Image Settings submenu pictured at left or, PROCESSING you may use the direct access instructions below:
AUTO CONFIGURATION i , |
1.Turn on your computer and display. 2.Push the 'Select/Auto button (E) to activate the Auto adjustment function. |
file://E:WEnglishWceontrols.htm 03-04-28
' Controls: Dell 1800FP Color Monitor User's Guide HOA 3/7 3.When finished, the pixel clock and phase should be adjusted to their optimal |
settings. i The Brightness function adjusts the luminance of the flat panel. i With the menu off, push the up(or down) arrow buttan to display the Brightness adjustment menu. Adjust Brightness first, then adjust Contrast only if further adjustment is necessary. Ajncrease luminance Wdecrease luminance Contrast: |The Contrast function adjusts the degree of difference between darkness and ilightness on the display screen. i
; With the menu off, push the left(or right) arrow button to display the Contrast adjustment menu.
| 4decrease the contrast Pincrease the contrast
Controls Locked/Unlocked: This function allows you to secure the current control settings, so that they |
Menu and, > cannot be inadvertently changed. Press and hold the MENU button and Pbutton |
for 3 seconds: the message CONTROLS LOCKED appears. i You can unlock the OSD controls at any time by pushing the MENU button and |
P button for 3 seconds: the message CONTROLS UNLOCKED will appear. CONTROLS LOCKED CONTROLS UNLOCKED Accessing the Menu System 1, With the menu off, push the MENU button to open the OSD system and display the main features menu. file://E:WEnglishWceontrols.htm 03-04-28 Controls: Dell 1800FP Color Monitor User's Guide BIOIAL 4 / 7 ope _ A 'Sub-menu icon | B [Sub-menu name |
2. The OSD main menu has 5 sub-menus including Brightress/Contrast, Color, Position, Tracking and Setup. Push the up and down arrow buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the function or group of functions (sub-menus) represented by that icon. See the table below for a complete list of all the functions available for the display. 3. Push the MENU button once to activate the highlighted function; then use the left and right buttons or the up and down arrow buttons, according to the indicators on the menu, to make your changes. 4. Push the Menu button once to return to the main menu to select another function or push the Menu button two or three times to exit from the OSD. Main Menu Mode Grouped by functions, the OSD offers 5 major functions in Main Menu for making adjustments: Brightness/Contrast, Color, Position, Tracking and Setup. The following describes the contents of each function and how you can make adjustments. Adjustment Brightness:
Adjust the brightness of the screen. Aincrease luminance Wdecrease luminance Contrast:
Adjust the contrast of the screen. 4decrease the contrast Pincrease the contrast
| 9300K This preset color temperature is more COLOR |
PRESET 9300K sRGB(6500K) sRGB(6500K) | This preset color temperature is more RED <AUt-> i GREEN iliiititiiii BLUE 4/{{t311>
i i
| RED User Preset:
i
| GREEN You can adjust the Red, Green and BI BLUE independently to your preference. When you enter the Color Settings submenu, this page will show 4decrease the brightness of the speci up if current input is D-sub or DVI-D. Color temperature is a P increase the brightness of the specif measure of the 'warmth of the image colors (red/green/blue). The available range is between 6500 to 9300K. You can select one cf the 2 Preset Color temperatures or utilize the RED/GREEN/BLUE'
option to customize the colar settings to your preference. ile://E:WEnglishWceontrols.htm 03-04-28 Controls: Dell 1800FP Color Monitor User's Guide POSITION ca "
(Ik >I 39 eal Positioning moves the viewing area around on the display screen. When making changes to either the Horizontal or Vertical
| settings, no changes will occur to the size of the viewing area. The
| image will be shifted in response to your selection/change. l > TRACKING
| CLOCK TMNT bese reed
| PHASE III IL NM 1 peeessesseonop The Clock and Phase adjustments allow you to more closely adjust your display to your preference. These settings are
| accessed through the main OSD menu, by setecting Tracking. use the Clock adjustment and then use Phase again. Se Note: This function may change the width of the display image. Use the Horizontal function of the Position menu to center the display image on the
| If satisfactory results are not obtained using the Phase adjustment, |
screen. Early Production SETUP LANGUAGE > ENGLISH IMAGE SIZE |
OSD POSITION |
i
i SIGNAL DSUB ANALOG FACTORY RESET > NO 1280X1024 @60.0Hz PRESET MODE DSUB ANALOG
: Later Production file://E:WEnglishWcontrols.htm HIOIA 5/7
| Horizontal Position:
i Adjust the horizontal position of the dis _ moves the screen left Pmoves the screen right ln. -
: Vertical Position:
Adjust the vertical position of the displ
| Wmoves the screen down Amoves the screen up
I
Clock:
This function only applies to D-sub i sub signal is input to the display, it wi to a digital signal through a signal sar ilt is possible the sampling interv:
| automatically optimized. In this case,
: an abnormal image displayed on the :
i vertical bars. You can adjust the sa manually through Pixel Clock func rough tracking adjustment decrease the sampling interval P increase the sampling interval
: Phase:
Just like Pixel Clock function, you can sampling phase. This is a fine tracking
| decrease phase shift of sampling sig Pincrease phase shift of sampling sigr
| Language:
i Selects the menu language. Image Size:
This function displays the image in its enlarges the size so it fits the full scres panel. OSD Position:
Adjusts the position of the OSD windo screen. 03-04-28 Controls: Dell 1800FP Color Monitor User's Guide HIO|AL 6/7 LANGUAGE ENGLISH ; active input. This feature is used wher OSD POSITION > =] | computers are connected to the displa automatically detects the proper input SIGNAL > DSUB ANALOG | video source is connected. FACTORY RESET >NO 1280X1024 @60.0Hz PRESET MODE Factory Reset:
Returns the original factory settings.
| Signal:
SETUP : Selects DSUB ANALOG or DVI DIGIT
: Press P button to activate. DSUB ANALOG Automatic Save With the OSD open, if you make an adjustment and then either proceed to another menu or exit the OSD, the display automatically saves any adjustments you have made. If you have made no adjustments, the on-screen menu disappears and the display does not save any new settings. OSD Warning Messages Self-Test Feature Check (STFC) SELF DIAGNOSTICS a a m NO SIGNAL a R a CHECK SIGNAL CABLE The floating SELF DIAGNOSTICS dialog will appear on-screen (against a black background) under the following conditions:
1. If the display is powered on with no signal cable attached, with any of the inputs selected. 2. If the signal cable is detached while the monitor is working normally with either the D-sub or DVI-d input selected. The display should stay in STFC mode until the input selection button is pressed to select input source which is active, or the cable is re-attached. In Power Save Mode file://E:WwEnglishWcontrols.htm 03-04-28 Controls: Dell 1800FP Color Monitor User's Guide HOA 7/7 a DSUB ANALOG a a a
@ POWER SAVING MODE @
When the computer system sends DPMS (Display Power Management Signaling) signais for display power management, the display will show the message of Power Saving Mode for 10 seconds then enter power saving mode. This occurs when the DB15 analog or DVI-D digital input is connected and selected, but the computer source has gone inactive. While the display is in power saving mode, the screen will remain black. You can press any key or move mouse to reactivate the display.
{input Signal Out of Range a INPUT SIGNAL a a =
a OUT OF RANGE a POWER MANAGEMENT 17SEC This means that the display cannot synchronize with the signal that it is receiving from the computer. Either the signal frequency is too high or too low for the display to use. See Specifications for the Horizontal and Vertical scan ranges addressable by this display. Sometimes, no warning message appears, but the screen is blank, which couid also indicate that the display is not synchronizing with the computer. LED Indicators Dispiay State [LED state jo " [Power management indicator is green ~~
: ae - i DPMS {Power management indicator is amber |
See Troubleshooting for mare information. Back to Contents Page file://EWEnglishWcontrols.htm 03-04-28 Troubleshooting: Dell 1800FP Color Monitor User's Guide HOA 1/3 Back to Contents Page Troubleshooting: Dell 1800FP Color Display User's Guide Display Specific Troubleshooting * Common Problems + Product Specific Problems Display Specific Troubleshooting Self-Test Feature Check (STFC) Your display provides a self-test feature that allows you to check whether your display is functioning properly. !f your display and computer are properly connected but the display screen remains dark, run the display self-test by performing the following steps:
1, Turn off both your computer and the display. 2. Unplug the video cable from the back of the computer. 3. Turn on the display. if the display is functioning properly, you will see the STFC pattern, SELF DIAGNOSTICS a a a NO SIGNAL a a a CHECK SIGNAL CABLE 4, While in self-test mode, the power management indicator remains green and the STFC pattern scroll through the screen. 5. Turn off your display and reconnect the video cable; then tum on both your computer and the display. If your display screen still remains dark after you use the previous procedure, check your video controller and computer system; your display is functioning properly. Power Saving Mode When the computer system is under power saving mode, the display will show the message of Power Saving Mode. Then press any key to reactivate the PC system. a DSUB ANALOG a a : a M POWER SAVING MODE @
file://E:WEnglishWtrouble.htm 03-04-28 Troubleshooting: Dell 1800FP Color Monitor User's Guide HOlAl 2/3 Common Problems The following table contains general information about commen display problems you might encounter. COMMON SYMPTOMS WHAT YOU SEE POSSIBLE SOLUTIONS No Video/ Power LED off i No picture, displays deacl. Check connection integrity Electric outlet verification No Video/ Power LED on No picture or no brightness Increase brighiness & contrast controls Perform display self test feature check Check for bent or broken pins on the signal cable Make sure the correct video input source is selected Stuck-on Pixels Brightness Problems Geometric Distortion i Horizontal/Vertical Lines Sync Problems file://E:WEnglishWtrouble.htm LCD screen has bright spots Picture too dim or too bright
| Screen not centered correctly i Screen has one or more lines Screen is scrambled or appears torn Poor Focus Picture is fuzzy, blurry or e Push Auto key ghosting e Adjust Phase and Clock controls via OSD e Eliminate video extension cables e Perform display reset Decrease brightness & contrast controls Make sure the display resolution is set to 1280x1024@60Hz Shaky/Jittery Video Wavy picture or fine e@ Push Auto key movement Adjust Phase and Clock controls via OSD
| e Perform Factory Reset Missing Pixels LCD screen has spots Cycle power on-off These are some pixels that are permanently off and is normal in LCD technology Cycle power on-off These are some pixels that are permanently on and is normal in LCD technology e Perform display reset Adjust brightness & contrast controls Push Auto key Adjust the centering controls Perform Factory Reset Ensure display is in proper video mode Perform Factory Reset Adjust Phase and Clock controls via OSD Push Auto key Perform display self test feature check Check for bent or broken pins Adjust Phase and Clock controls via OSD Push Auto key Perform display self test feature check Check for bent or broken pins If using Microsoft Windows, boot up in the safe mode"
03-04-28 Troubleshooting: Dell 1800FP Color Monitor User's Guide HOLA 3/3 LCD Scratched Screen has scratches or smudges Safety Related Issues Visible signs of smoke or sparks Turn display off and clean the screen Do not perform any troubleshooting steps e Display needs to be replaced Intermittent Problems
| Display malfunctions on & off
Product Specific Problems
| SPECIFIC SYMPTOMS | WHAT YOU SEE
/ osp does not appear on the
| screen
' Cannot adjust the display with the buttons on the front panel
| Image is centered on screen,
| but does not fill entire viewing area
| Screen image is too smal!
Ensure display is in proper video mode Ensure video cable connection is secure Perform Factory Reset Perform display self test feature check POSSIBLE SOLUTIONS Make sure the controls are not locked. See Using the Monitor section for the Lock feature. Disconnect AC power from the display, wait five minutes and then re-connect AC power Adjust the image Size feature via the OSD and select Full. This feature is located under Image Settings Back ta Cantents Page file://E:wEnglishWtrouble.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide HOHAl 1/8 Back to Contents Page Regulatory: Dell 1800FP Color Display User's Guide Electric and Magnetic Fields Energy Efficiency Federal Communications Commission (FCC) Notice (U.S. Only) * CE Conformity Notice(for Europe) Canadian Regulatory Information (Canada Only) * EN 55022 Compliance (Czech Republic Only) * VCCI Class 2 Notice (Japan Only) * MIC Notice (South Korea Only) Polish Center for Testing and Certification Notice * NOM Information (Mexico Only} * BSMI Notice Dell Computer Corporation's Environmental Program + Regulatory Listing Electric and Magnetic Fields Early Production : TCO95 Later Production : TCO99 Congratulations!
You have just purchased a TCO'95 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentaily adapted electronics products. Why do we have environmentally labeled computers?
In many countries, environmental iabeling has become an established method far encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labeling involve?
This product meets the requirements for the TCO'95 scheme which provides for intemational and environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish Nationa! Energy Administration). Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce file://E:wEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide HO|Al 2/8 its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shail be reasonable for the user. Labeled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from:
TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (internet): develapment@tco.se Current information regarding TCO'95 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at feast to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. The relevant TCO'95 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'95 requirement states that batteries, the colaur-
generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO'95 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. CFCs (freons) The relevant TCO'95 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence. Lead Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'95 requirement permits the inclusion of lead since no replacement has yet been developed. file://E:WEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide HOA 3/8
* Bio-accumulative is defined as substances which accumulate within living organisms
* Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative. Es You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labeled computers?
' In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services ta the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climateinfluencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labelling involve?
This product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental der example, in respect of the reduction of electric and magnetic fields, physica! and visual ergonomics and good usability. Belmands, foow you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from:
TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se file: //E:wEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide HO|AL 4/8 Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http:/Avww.tco-info.comy/
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Mostflame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chioride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bioaccumulative*
processes. Flame retardants have been found in human blood and researchers fear disturbances in foetus development May occur. The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are availabte. Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The retevant TCO'99 requirement states that batteries, the colourgenerating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury*
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence. Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative. Energy Efficiency The proper operation of the function requires a computer with VESA DPMS power management capabilities. When used with a computer equipped with VESA DPMS, the display is ENERGY STAR-compliant. As an ENERGY STAR Partner, Dell Computer Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Federal Communications Commission (FCC) Notice (U.S. Only) file://EWEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide HOA 5/8 Adwarnne: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate receiving antenna. Increase the separation between the equipment and receiver. e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
e This device may not cause harmful interference.
* This device must accept any interference received including interference that may cause undesired operation. Instructions te Users: This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that following conditions are met. 1, Power cable: Shielded power cable must be used. 2. Video inputs: The input signal amplitude must not exceed the specified level.
<\caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive (73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :
+ EN 55022 ; Radio Frequency Interference
+ EN 50082-1:1992 ; Electromagnetic Immunity
+ EN 60555-2 ; Power Line Harmonics
+ EN 60555-3 ; Voltage Fluctuations
+ EN 60950 ; Product Safety Canadian Regulatory Information (Canada Only) This digital apparatus does not exceed the Class B iimits for radio noise emissions from digital apparatus set aut in the Radio interference Regulations of the Canadian Department of Communications. Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by Dell Computer Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. file://E:WEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide HOA 6/8 EN 55022 Compliance (Czech Republic Only) This desice belongs to cateyory B devices as described in EN 5022,unlessitis soe Gitically stated thatitis a category Adenice on the spesification label. The fallowing applies to devicesin category A of EN E5022 Garlius of protection up t 30 meters), Theuser of the deviceiscbliger to takeall steps necessary toremove scurozs of interference of talecommunication or cthier devices. Potad reri na typovm itu pottae uvedeno, Ze spada do tidy Apodle EN 65022, spada automaticky de tidy 8 podle EN 56022. Fro zalizeni zafazena do tidy A Ghrann_pasmo 30m) podle EN 55022 plati ndsledujici. Dojde-i k ruent talelomunkanict nebo jnych afizeni. je udvatd povinen provst takovd opatieni, aby rufeni odstranil, VCCI Class 2 Notice (Japan Only) This equipment complies with the limits for a Class 2 digital device (devices used in or adjacent to a residential environment}
and conforms to the standards for information technology equipment that are set by the Voluntary Contro! Council for Interference for preventing radio frequency interference in residential areas. Class BITE MIC Notice (South Korea Only) B Class Device Please note that this device has been approved for nonbusiness purposes and may be used in any environment, including residential areas. Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-
file://E:WEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide 93/T-42107 and PN-89/E-06251. Hymagania Polskiego Centrum Badan i Certyfikacji uae pan inne byt sasilane 2 tenazda 4 prestacesinpm sbseoaem ocheonaye (iaeds nace ve sobg eradrema [homiputet, thuthtor, deukathat powrnny bye istlane Inslalacja elektryema pomiesrczenta powinna 7awicrd w prrewadeie Exrowym nezerwurna ochrang pared nwarciam|, wpeslaci beepeconla o warteici mamionaywey ne wieksze) MLE JA camperiw) W elu calkoanege wylicccnia ursadeens steve aasitania, mabey wyiak whycekg Kable rasigieag gnibatha, Mdre piwinn caidas o 6 pubbizu uradcenti byt bat dosegpne. urcadsema wyasaganiami hespreesebstora TED -BOT-AGZS Arak berneccefotsu B" paererdca oy usythowdras sawuriynn # PS-98 TAP]
Pozostate instrukeje becpieczenstwa ic naleay uzywad wtyerck adapterowryel tab usuwat kotha bwodu echninnege 2a Lsecke Jeach homacene jes] ueyere pezodlusaesa to nalery wave plewliusacrs 37 slow eg 7 prawidiowy peitaccanytn gercewodern dlixanty a, System: kompotcrowy nalevy sabeypivery: proed ayia, ebwilowymi wervstamma bub spoil fa. uyWajac vhtoinatora precpic, urzadzenia dupascraujacege tah ny kablach systemu homaputerowae cris aby kable te ova byloby a mie adits wae fal pay kad ie 0 ne ch ply ria systert henputerowy, Nie nalezy wpychst Aadnych prredmineiw de anwprd syte ta spowodowae pyar lub porufenie pradt Komguterowey. gv maze Jementw wenngtrznych, Hhbw 1 drddet ciepla, Ponto, ladzenza luzmych papacrine pod cinsnym mixtseu bex madliwoic cyrkulacsi powi-
nie nalefy blokawsd uwenia went acyinyeh. Nake keunpiter ort urmesee ans etrza wokol meg NOM Information (Mexico Only) HiO!Al 7/8 The following information is provided on the device(s) described in this document in compliance with the requirements of the official Mexican standards (NOM) Dell Computer Corporation Exporter: One Dell Way Round Rock, TX 78682 Del! Computer de Mxico, Importer: S.A. de C.V. Rio Lerma No. 302 - 4 Piso Col. Cuauhtemoc 16500 Mxico, D.F. Dell Computer de Mxico, S.A. de C.V. al Cuidado de Kuehne & Nagel Ship to: de Mxico S. de R.l., Avenida Soles No. 55 Col. Pefion de los Bafios, 15520 Mxico, D.F. Supply voltage: > 100/240 VAC Frequency: 50/60 Hz Current consumption: 1.0 A Informacin para NOM (Gnicamente para Mxico}
La informacion siguiente se proporciona en el dispositivo o en los dispositivos descritos en este documento, en cumplimiento con los requisitos de la Norma Oficial Mexicana (NOM):
Dell Computer Corporation Exporter: One Dell Way Round Rock, TX 78682 Dell Computer de Mxico, Importador: S.A. de C.V, Rio Lerma No. 302 - 4 Piso Col. Cuauhtemoc 16500 Mxico, D.F. Dell Computer de Mxico, file://E-weEnglishWregs.htm 03-04-28 Regulatory: Dell 1800FP Color Monitor User's Guide S.A. de C.V. at Cuidado de Kuehne & Nagel Embarcar a: de Mxico S. de R.1|., Avenida Soles No. 55 Col. Pefion de los Bafios, 15520 Mxico, D.F. Tension alimentaci6n: 100/240 VAC Frecuencia: 50/60 Hz Consumo de corriente: 1.0 A BSM! Notice (Taiwan Only) PELE CAEMMANEL TRAGER TEP RR RE HOH CIMACT ETA RR Dell Computer Corporation's Environmental Program Please visit Dell's environmental Web site to learn more about Dell's environmental programs. HOIX 8/8 Regulatory Listing Safety Certifications:
UL 1950 NOM CE MarkEN60950: 1992 + A1 + A2 + A3 NEMKO SEMKO EZU IEC 950 TUV GS PCBC GOST ccc K-mark PSB EMC Certifications:
FCC Part 15 Class B Ezu NEMKO SEMKO PCBC. GOST C-Tick VCCI Class BITE MIC BSMI Ergonomics:
e ENERGY STAR?
e TCO 95 e GOST Hygienic CE MarkEN55022:1998 Class B, EN61003-2:1995, EN61003-3:1995, ENS5024:1998 Back to Contents Page file://E:WwEnglishWregs.htm 03-04-28 Warranties: Dell Service and Support Plan Guide HOA 1/5 Back to Contents Page Limited Warranties Limited Warranties for Dell Branded Hardware Products Limited Three-Year Warranty (U.S. Only} Limited Three-Year Warranty (Canada Only) * One Year Dell Manufacturer End-User Guarantee European Union, Norway and Switzerland
"Total Satisfaction Return Policy (U.S. and Canada Only) Limited Warranties for Dell Branded Hardware Products DELL-BRANDED HARDWARE PRODUCTS COME WITH A LIMITED WARRANTY. THE LIMITED WARRANTY COVERING YOUR PARTICULAR SYSTEM WILL BE NOTED ON YOUR INVOICE AND INCLUDED IN THE DOCUMENTATION ACCOMPANYING YOUR SYSTEM. DELL-BRANDED MONITORS PURCHASED INDEPENDENT OF A SYSTEM PURCHASE COME WITH THE LIMITED WARRANTY SET OUT BELOW.
(For US customers, a copy of Dell's limited warranty statement can be obtained by writing Dell at USA L.P., Attn: Warranties, One Dell Way, Round Rock, TX 78682.) Limited Three-Year Warranty (U.S. Only) De!l Computer Corporation ("Dell") manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry-standard practices. Dell warrants that the hardware products it manufactures will be free from defects in materials and workmanship. The warranty term is three years beginning on the date of invoice, as described in the following text. Damage due to shipping the products to you is covered under this warranty. Otherwise, this warranty does not cover damage due to external causes, including accident, abuse, misuse, problems with electrical power, servicing not authorized by Dell, usage not in accordance with product instructions, failure to perform required preventive maintenance, and problems caused by use of parts and components not supplied by Dell. This warranty does not cover any items that are in one or more of the following categories: software; externa! devices (except as specifically noted); accessories or parts added to a Dell system after the system is shipped from Dell; accessories or parts added to a Dell system through Dells system integration department; accessories or parts that are not installed in the Dell factory; or DellWareS products. Displays, keyboards, and mice that are Dell-branded or that are included on Dell's standard price list are covered under this warranty; all other displays, keyboards, and mice (including those sold through the DellWare program} are not covered. Batteries for portable computers are covered only during the initial one-year period of this warranty. Coverage During Year One During the one-year period beginning on the invoice date, Dell will repair or replace products covered under this limited warranty that are returned to Dell's facility. To request warranty service, you must call Dell's Customer Technical Support within the warranty period. Refer to "Getting Help in your /nsfaflation and Troubleshooting Guide to find the appropriate telephone number for obtaining customer assistance. If warranty service is required, Dell will issue a Return Material Authorization Number. You must ship the products back to Dell in their original or equivalent packaging, prepay shipping charges, and insure the shipment or accept the risk of loss or damage during shipment. Dell will ship the repaired or replacement products to you freight prepaid if you use an address in the continental U.S., where applicable. Shipments to other locations will be made freight collect. yY NOTE: Before you ship the product(s) to Dell, back up the data on the hard-disk drive(s) and any other storage device(s) in the product(s). Remove any removable media, such as diskettes, CDs, or PC Cards. Dell does not accept liability for Jost data or software. Deli owns all parts removed from repaired products. Dell uses new and reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Dell repairs or replaces a product, its warranty term is not extended. Coverage During Years Two and Three file: //E*WEnglishWwarranty.htm 03-04-28 Warranties: Dell Service and Support Plan Guide HIOIA 2/5 During the second and third years of this timited warranty, Dell will provide, on an exchange basis and subject to Dell's Exchange Policy in effect on the date of the exchange, replacement parts for the Dell hardware product(s) covered under this limited warranty when a part requires replacement. You must report each instance of hardware failure to Dell's Customer Technica! Support in advance to obtain Dell's concurrence that a part should be replaced and to have Dell ship the replacement part. Dell will ship parts (freight prepaid) if you use an address in the continental U.S. or Canada, where applicable. Shipments to other locations will be made freight collect. Dell will include a prepaid shipping container with each replacement part for your use in returning the replaced part to Dell. Replacement parts are new or reconditioned. Dell may provide replacement parts made by various manufacturers when supplying parts to you. The warranty term for a replacement part is the remainder of the limited warranty term. You will pay Dell for replacement parts if the replaced part is not returned to Dell. The process for returning replaced parts, and your obligation to pay for replacement parts if you do not return the replaced parts to Dell, will be in accordance with Dell's Exchange Policy in effect on the date of the exchange. You accept full responsibility for your software and data. Dell is not required to advise or remind you of appropriate backup and other procedures. General Provisions THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS WHICH VARY FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION). DELLS RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER SUCH PERIOD. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE PRECEDING LIMITATION MAY NOT APPLY TO YOU. DELL DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH IN THIS WARRANTY STATEMENT OR LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LIABILITY FOR PRODUCTS NOT BEING AVAILABLE FOR USE OR FOR LOST DATA OR SOFTWARE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE PRECEDING EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. These provisions apply to Dell's limited three-year warranty only. For provisions of any service contract covering your system, refer to your invoice or the separate service contract that you will receive. If Dell elects to exchange a system or component, the exchange will be made in accordance with Dell's Exchange Policy in effect on the date of the exchange. In any instance in which Dell issues a Return Material Authorization Number, Dell must receive the product(s) for repair prior to the expiration of the warranty period in order for the repair(s) to be covered by the warranty. Y NOTE: If you chose one of the available warranty and service options in place of the standard limited three-year warranty described in the preceding text, the option you chose will be listed on your invoice. Limited Three-Year Warranty (Canada Only) Dell Computer Corporation ("Dell") manufactures its hardware products from parts and components that are new or equivaient to new in accordance with industry-standard practices. Dell warrants that the hardware products it manufactures will be free from defects in materials and workmanship. The warranty term is three years beginning on the date of invoice, as described in the following text. Damage due to shipping the products to you is covered under this warranty. Otherwise, this warranty does not cover damage due to external causes, including accident, abuse, misuse, problems with electrical power, servicing not authorized by Dell, usage not in accordance with product instructions, failure to perform required preventive maintenance, and problems caused by use of parts and components not supplied by Dell. This warranty does not cover any items that are in one or more of the following categories: software; external devices (except as specifically noted); accessories or parts added to a Dell system after the system is shipped from Dell; accessories or parts added to a Dell system through Deil's system integration department, accessories or parts that are not installed in the Dell factory; or DellWareS products. Displays, keyboards, and mice that are Deil-branded or that are included on Dell's standard price list are covered under this warranty; all other displays, keyboards, and mice {including those sold through the DellWare file: //E:WEnglishWwarranty.htm 03-04~28 Warranties: Dell Service and Support Plan Guide HOI 3/5 program) are not covered. Batteries for portable computers are covered only during the initial one-year periad of this warranty. Coverage During Year One During the one-year period beginning on the invoice date, Dell will repair or replace products covered under this limited warranty that are returned to Del's facility. To request warranty service, you must call Dell's Customer Technical Support within the warranty period. Refer to "Getting Help in your fnstailation and Troubleshooting Guide to find the appropriate telephone number for obtaining customer assistance. If warranty service is required, Dell will issue a Return Material Authorization Number. You must ship the products back to Dell in their original or equivalent packaging, prepay shipping charges, and insure the shipment or accept the risk of loss or damage during shipment. Dell will ship the repaired or replacement products to you freight prepaid if you use an address in Canada, where applicable. Shipments to other locations will be made freight collect. ez NOTE: Before you ship the product(s) to Dell, back up the data on the hard-disk drive(s) and any other storage device(s) in the product(s). Remove any removable media, such as diskettes, CDs, or PC Cards. Delf does not accept liability for lost data or software. Dell owns all parts removed from repaired products. Dell uses new and reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. if Dell repairs or replaces a product, its warranty term is not extended. Coverage During Years Two and Three During the second and third years of this limited warranty, Dell will provide, on an exchange basis and subject to Dell xchange Policy in effect on the date of the exchange, replacement parts for the Dell hardware product(s) covered under this limited warranty when a part requires replacement. You must report each instance of hardware failure to Dells Customer Technical Support in advance to obtain Dell's concurrence that a part should be replaced and to have Dell ship the replacement part. Dell will ship parts (freight prepaid) if you use an address in the continental U.S. or Canada, where applicable. Shipments to other locations will be made freight collect. Dell will include a prepaid shipping container with each replacement part for your use in returning the replaced part to Dell. Replacement parts are new or reconditioned. Dell may provide replacement parts made by various manufacturers when supplying parts to you. The warranty term for a replacement part is the remainder of the limited warranty term. You will pay Dell for replacement parts if the replaced part is not returned to Dell. The process for returning replaced parts, and your obligation to pay for replacement parts if you do not return the replaced parts to Dell, will be in accordance with Dell's Exchange Policy in effect on the date of the exchange. You accept full responsibility for your software and data. Dell is not required to advise or remind you of appropriate backup and other procedures. General Provisions DELL MAKES NO EXPRESS WARRANTIES OR CONDITIONS BEYOND THOSE STATED IN THiS WARRANTY STATEMENT. DELL DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR CONDITIONS, SO THIS LIMITATION MAY NOT APPLY TO YOU. DELL'S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION}. DELL DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH IN THIS WARRANTY STATEMENT OR LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LIABILITY FOR PRODUCTS NOT BEING AVAILABLE FOR USE OR FOR LOST DATA OR SOFTWARE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE PRECEDING EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. These provisions apply to Dell's limited three-year warranty only. For provisions of any service contract covering your system, refer to your invoice or the separate service contract that you wilt receive. If Dell elects to exchange a system or component, the exchange will be made in accordance with Dell's Exchange Policy in effect on the date of the exchange. In any instance in which Dell issues a Return Material Authorization Number, Dell must file://E-WEnglishWwarranty.htm 03-04-28 Warranties: Dell Service and Support Plan Guide HOA 4 / 5 receive the product(s) for repair prior to the expiration of the warranty period in order for the repair(s) to be covered by the warranty. we NOTE: if you chose one of the available warranty and service options in place of the standard limited three-year warranty described in the preceding text, the option you chose will be listed on your invoice. One Year Deli Manufacturer End-User Guarantee European Union, Norway and Switzerland Guarantee DELL Products, Raheen Industrial Estate, Limerick, ireland (DELL) warrants to the end-user in accordance with the following provisions that its branded hardware products, purchased by the end-user from a DELL company or an authorized DELL distributor, in the European Union, Norway or Switzerland, will be free from defects in materials, workmanship and design affecting normal use, for a period of one year as of the original purchase date. Products for which proper claims are made will, at DELLs option, be repaired or replaced at DELLs expense. Exclusions This Guarantee does not apply to defects resulting from: improper or inadequate installation, use or maintenance; actions or modifications by unauthorized third parties or the end-user; accidental or wilful damage or normal wear and tear. Making a claim Claims must be made in the European Union, Norway or Switzerland, by contacting the point of sale or any DELL office within the guarantee period. The end-user must always supply proof of purchase, indicating name and address of the seller, date of purchase, model and serial number, name and address of the customer and details of symptoms and configuration at time of malfunction, including peripherals and software used. Otherwise, DELL may refuse the guarantee claim. Upon diagnosis of a warranted defect, DELL will make arrangements, and pay for ground freight and insurance to and from DELL repair/
replacement centre. End-user must ensure defective product is available for collection properly packed in original or equally protective packaging together with details listed above and the return number provided to the end-user by DELL. Limitation and Statutory Rights DELL makes no other warranty, guarantee or like statement other than as explicitly stated above and this Guarantee is given in place of all other guarantees whatsoever, to the fullest extent permitted by law. In the absence of applicabie legislation, this Guarantee will be the end-user's sole and exclusive remedy against DELL or any of its affiliates, and neither DELL nor any of its affiliates shall be liable for loss of profit or contracts, or any other indirect or consequential loss arising from negligence, breach of contract, or howsoever. This Guarantee does not impair or affect mandatory statutory rights of the end-user against and/or any rights resulting from other contracts concluded by the end-user with DELL and/or any other selter. General Provisions DELL MAKES NO EXPRESS WARRANTIES OR CONDITIONS BEYOND THOSE STATED IN THIS WARRANTY STATEMENT. DELL DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW LIMITATIONS ON [IMPLIED WARRANTIES OR CONDITIONS, SO THIS LIMITATION MAY NOT APPLY TO YOU. DELLS RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION). DELL DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH IN THIS WARRANTY STATEMENT OR LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LIABILITY FOR PRODUCTS NOT BEING AVAILABLE FOR USE OR FOR LOST DATA OR SOFTWARE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE PRECEDING EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. These provisions apply to Dell's timited three-year warranty only. For provisions of any service contract covering your system, refer to your invoice or the separate service contract that you will receive. file://E:WEnglishWwarranty.htm 03-04-28 Warranties: Dell Service and Support Plan Guide HOA 5/5
<& NOTE. if you chose one of the available warranty and service options in place of the standard limited three-year warranty described in the preceding text, the option you chose will be listed on your invoice.
"Total Satisfaction" Return Policy (U.S. and Canada Only) If you are an end-user customer who bought new products directly from a Dell company, you may return them to Dell within 30 days of the date of invoice for a refund or credit of the product purchase price. if you are an end-user customer who bought reconditioned or refurbished products from a Dell company, you may return them to Dell within 14 days of the date of invoice for a refund or credit of the product purchase price. In either case, the refund or credit will not include any shipping and handling charges shown on your invoice. If you are an organization that bought the products under a written agreement with Dell, the agreement may contain different terms for the return of products than specified by this policy. To return products, you must call Dell Customer Service to receive a Credit Return Authorization Number. Refer to "Getting Help in your instalation and Troubleshooting Guide to find the appropriate telephone number for obtaining customer assistance. To expedite the processing of your refund or credit, Dell expects you to return the products to Dell in their original packaging within five days of the date that Dell issues the Credit Return Authorization Number. You must also prepay shipping charges and insure the shipment or accept the risk of loss or damage during shipment. You may return software for refund or credit only if the sealed package containing the diskette(s) or CD(s) is unopened. Returned products must be in as-new condition, and all of the manuals, diskette(s), CD(s), power cables, and other items included with a product must be returned with it. For customers who want to return, for refund or credit only, either applications software or an operating system that has been installed by Dell, the whole system must be retumed, along with any media and documentation that may have been included in the original shipment. This "Total Satisfaction Return Policy does not apply to DellWare products, which may be returned under DellWare's then-
current return policy. In addition, reconditioned parts purchased through Dell Spare Parts Sales in Canada are nonreturnable. Back to Contents Page file://E:WEnglishWwarranty.htm 03-04-28 Documentation: Deli 1800FP Color Monitor User's Guide MoO 1/1 Back to Contents Page Documentation: Dell 1800FP Color Display User's Guide You must right-click the link for a portable document format (PDF) file and save the file to your hard-disk drive. Attempting to link directly to large PDF files can cause your system to freeze. To save PDF files (files with an extension of .pdf} to your hard-disk drive, right-click the document title, click Save Target As in Microsoft Internet Explorer or Save Link As in Netscape Navigator, and specify a location on your hard-disk drive. Right-click only the following link:
Quick Set-up" (pdf) To view a PDF file, launch Adobe Acrobat Reader. Click File > Open and select the PDF file. NOTE: PDF files require Adobe Acrobat Reader, which can be downloaded from the Adobe World Wide Web
"site. Back to Contents Page file://E-wEnglishWdocs.htm 03-04-28
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-05-06 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-05-06
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
L18KD
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** H********
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R**** O******
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 18-inch LCD Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Max. Resolution: 1280 x 1024 | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Gumi University EMC Center
|
||||
1 | Name |
T**** P******
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@kumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 19 CE |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC