all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 911.16 KiB | July 05 2003 | |||
1 | External Photos | July 05 2003 | ||||||
1 | ID Label/Location Info | July 05 2003 | ||||||
1 | Internal Photos | July 05 2003 | ||||||
1 | Test Report | July 05 2003 | ||||||
1 | Test Report | July 05 2003 | ||||||
1 | Cover Letter(s) | July 05 2003 | ||||||
1 | RF Exposure Info | July 05 2003 | ||||||
1 | RF Exposure Info | July 05 2003 | ||||||
1 | RF Exposure Info | July 05 2003 | ||||||
1 | RF Exposure Info | July 05 2003 | ||||||
1 | RF Exposure Info | July 05 2003 | ||||||
1 | Cover Letter(s) | July 05 2003 | ||||||
1 | Test Setup Photos | July 05 2003 | ||||||
1 | Parts List/Tune Up Info | July 05 2003 |
1 | User Manual | Users Manual | 911.16 KiB | July 05 2003 |
ENGLISH WAP Phone USERS MANUAL MODEL: W3000S Please read this manual carefully before operating your set. Retain it for future reference. W3000S has a polished style which provides users a better feel and convenience. W3000S Phone E N G L S H3 I For Your Safety All radio transmitters carry risks of interference with electronics in close proximity. GSM Phones must be switched off at all times in an aircraft. Do not activate near petrol stations, fuel depots, chemical plants or blasting operations. Switch off the phone in any area where are forced by special regulations. For example, the phone does not allow to be used in hospital because pacemakers and hearing aids can be affected. Minor interference may affect TVs, radios, PCs, etc. Do not hold the phone in your hand while driving. Do not dismantle phone or battery. Keep the phone in a safe place out of childrens reach since it contains the detachable small parts and create a choking hazard. E N G L S H 4 I Do not touch the charger with wet hands. For your safety, use ONLY specified ORIGINAL batteries and chargers. Please note:
Unusable batteries should be disposed of in accordance with relevant legislation. Only use ORIGINAL accessories to avoid damage to your phone. Emergency call may not be available under all cellular networks. Therefore, you should never depend solely on the phone for essential communications such as medical emergencies. Important Information This user's guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user's guide could void your warranty for this equipment. E N G L S H5 I Contents Overview Accessories ......................................................................... 10 Part of the Phone ................................................................ 11 Front of the Phone ............................................................ 11 Rear of the Phone ............................................................. 12 Key Description ................................................................... 13 Alphanumeric Keys ........................................................... 15 Display Information Display Information ............................................................. 16 On-Screen Icons ............................................................... 16 Getting Started Installation ........................................................................... 18 Inserting the SIM Card ...................................................... 18 Installing the Battery ......................................................... 18 Charging the Battery ......................................................... 19 Disconnecting the charger ................................................ 20 Instructions for changing the front colour cover ................ 21 Powering On Sequence ...................................................... 22 To get started with the phone ........................................... 22 To turn off the phone ......................................................... 22 Access Codes ...................................................................... 23 PIN code (4 to 8 digits) ..................................................... 23 PIN2 code (4 to 8 digits) ................................................... 23 PUK code (4 to 8 digits) .................................................... 23 PUK2 code (4 to 8 digits) .................................................. 24 Security code (4 to 8 digits) .............................................. 24 E N G L S H 6 I Accessing the Menu Phonebook ........................................................................... 25 Search [Names 1] ............................................................. 26 Add new [Names 2] ........................................................... 27 Speed dial [Names 3] ........................................................ 29 Voice list [Names 4] .......................................................... 29 Caller groups [Names 5] ................................................... 30 Copy all [Names 6] ............................................................ 31 Delete all [Names 7] .......................................................... 31 Settings [Names 8] ............................................................ 32 Information [Names 9] ....................................................... 33 Menu Tree ............................................................................ 35 Messages [Menu 1] ............................................................. 38 Write message [Menu 1-1] ................................................ 38 Inbox [Menu 1-2] ............................................................... 43 Outbox [Menu 1-3] .............................................................44 Info Service [Menu 1-4] ..................................................... 45 Voice messages [Menu 1-5] ............................................. 47 Namecard [Menu 1-6] ....................................................... 48 Templates [Menu 1-7] ....................................................... 48 Settings [Menu 1-8] ........................................................... 48 Check memory [Menu 1-9] ................................................ 49 Call Register [Menu 2] ........................................................ 50 Missed calls [Menu 2-1] .................................................... 50 Received calls [Menu 2-2] ................................................. 50 Dialled calls [Menu 2-3] ..................................................... 50 Clear recent calls [Menu 2-4] ............................................ 51 Call charge [Menu 2-5] ...................................................... 51 E N G L S H7 I Profiles [Menu 3] ................................................................. 54 Vibrate only [Menu 3-1] ..................................................... 55 Quiet [Menu 3-2] ............................................................... 55 General [Menu 3-3] ........................................................... 55 Loud [Menu 3-4] ................................................................ 55 Headset [Menu 3-5] .......................................................... 55 Car [Menu 3-6] .................................................................. 56 Settings [Menu 4] ................................................................ 58 Alarm clock [Menu 4-1] ..................................................... 58 Date & Time [Menu 4-2] .................................................... 59 Phone settings [Menu 4-3] ................................................ 61 Call settings [Menu 4-4] .................................................... 62 Security settings [Menu 4-5] ............................................. 64 Network settings [Menu 4-6] ............................................. 68 Restore factory settings [Menu 4-7] .................................. 69 Call Divert [Menu 5] ............................................................. 70 All voice calls [Menu 5-1] .................................................. 70 If busy [Menu 5-2] ............................................................. 70 If no reply [Menu 5-3] ........................................................ 70 If unreachable [Menu 5-4] ................................................. 70 All data calls [Menu 5-5] .................................................... 71 All fax calls [Menu 5-6] ...................................................... 71 Cancel all [Menu 5-7] ........................................................ 72 Scheduler [Menu 6] ............................................................. 73 Add new [Menu 6-1] .......................................................... 74 View day [Menu 6-2] ......................................................... 75 View all [Menu 6-3] ........................................................... 75 Delete passed [Menu 6-4] ................................................. 75 Delete all [Menu 6-5] ......................................................... 75 E N G L S H 8 I Fun & Tools [Menu 7] .......................................................... 76 Game [Menu 7-1] .............................................................. 76 Unit convert [Menu 7-2] ..................................................... 77 Calculator [Menu 7-3] ........................................................ 78 World time [Menu 7-4] ....................................................... 78 Internet [Menu 8] ................................................................. 79 Home [Menu 8-1] .............................................................. 79 Bookmarks [Menu 8-2] ...................................................... 79 Profiles [Menu 8-3] ............................................................ 80 Go to URL [Menu 8-4] ....................................................... 82 Cache settings [Menu 8-5] ................................................ 83 Security certifications [Menu 8-6] ...................................... 83 Reset profiles [Menu 8-7] .................................................. 83 Internet On-line menu ......................................................... 84 Additional Functions How to Use Data and Fax call ............................................ 85 Sending Data or Fax Calls ................................................ 85 Receiving Data or Fax Calls ............................................. 85 In call Menu .......................................................................... 87 1 During a call ................................................................... 87 2 Multiparty or Conference Calls ....................................... 89 Care and Maintenance ........................................................ 92 Technical Data ..................................................................... 95 E N G L S H9 I Accessories Check to make sure that you have all the parts shown below. Overview Handset Standard Battery Warranty Card(s) Travel Adapter Users manual E N G L S H 10 I Part of the Phone Front of the Phone Overview 1 Earpiece 2 Display Screen 3 Soft Left Key 4 Navigation Keys 5 Send Key 6 Star Key 7 Soft Right Key 8 END/PWR keys 9 Numeric Keys 10 Hash Key 11 Microphone 12 Ear Microphone Connector E N G L S H I 11 Part of the Phone Rear of the Phone 5 7 6 Overview 1 4 3 2 1 Battery 2 Cable Connector/
Battery Charging Connector/
Hands-Free Car kit Connector 3 Battery Terminals 4 SIM Card Socket 5 Handstrap Hole 6 Battery Lock 7 Ear Microphone Connector E N G L S H 12 I Key Description Overview The following shows key components of the phone. Keypad Description Key Description Soft Left Key / Soft Right Key Each of these keys performs the function indicated by the text on the display immediately above it. WAP Hotkey Used to connect to WAP directly by pressing this key. Used to delete character(s). Navigation Keys Used to scroll through name, phone numbers, menus or setting options. Used to enter Message menu directly. Used to scroll through names, phone numbers. Send Key You can dial a phone number and answer a call. If you press this key without entering a number, your phone shows the most recently dialed number. Numeric Keys These keys are used mainly to dial in standby mode and enter numbers or characters in editing mode. When you press these keys for a long time. Used to call your voicemail box by . Used to call for international call by . Used to call Speed dials by from to . 13 E N G L S H I Key Description Overview Key Description Used to enter the vibration mode by pressing this key for a long time Used to call by voice dial with long pressing this key. This key is also used as Ear mic. hook key when connecting Ear mic. END/PWR Key Used to end or reject a call. This key is also used as Power Key. Pressing and holding this key for a few seconds. E N G L S H 14 I Alphanumeric Keys The alphabet and numerical keypad mapping relation are listed as the following table. Overview Key Description
. , ' ? ! - & 1 A B C 2 a b c D E F 3 d e f G H I 4 g h i J K L 5 j k l M N O 6 m n o P Q R S 7 p q r s T U V 8 t u v W X Y Z 9 w x y z 0 [Space Key]
E N G L S H I 15 Display Information Display Information The screen displays several icons the following describe each of them you may see on the phone. On-Screen Icons Icon/Indicator Description Tells you the strength of the network signal. Call is connected. The alarm has been set and is on. Tells you the status of the battery. You have received a text message. You have received a voice message depending on your subscription. You have received an E-mail. You can view your schedule. All audible signals are turned off. General menu in profiles. Loud menu in profiles. Quiet menu in profiles. E N G L S H 16 I Display Information Icon/Indicator Description Headset menu in profiles. Handsfree menu in profiles. You can divert a call. Top Menu Icons Icon Description Messages Call register Profiles Settings Call divert Scheduler Fun & Tools Internet Sim service E N G L S H I 17 Installation Inserting the SIM Card Getting Started Locate the SIM card socket in the back of the phone. Follow the steps below to install the SIM card. 1. Remove the battery if attached. 2. Slide the SIM card into the slot, under the silvery holders, with the golden connectors facing down and the cut corner to the right. Notice
Before installing always make sure that the phone is switched off and remove the battery.
The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card when you handle and install. Follow the instructions supplied with the SIM card. Installing the Battery 1. Place the battery on the back of the phone. E N G L S H 18 I Getting Started 2. Push it until you hear a click. Charging the Battery To connect the travel adapter to the phone, you must have installed the battery. 1. Insert one end of the travel adapter into the bottom of the phone. 2. Connect the other end of the travel adapter to an AC wall outlet. Use only the included packing charger. Warning
Do not force the connector as this may damage the phone and/or the travel adapter. E N G L S H I 19 Installation Disconnecting the charger Getting Started Disconnect the travel adapter from the phone by pressing its side buttons. Notice
The battery delivered with your phone has to be fully charged before using it.
Do not remove your battery or the SIM card while charging.
Charging is displayed on the screen after connecting the travel adapter. Only if the battery is totally empty, Back light is on without displaying Charging.
The moving bars of battery icon will stop after charging completely. E N G L S H 20 I Instructions for changing the front colour cover Before changing the cover, always switch off the power and disconnect the phone from the charger or any other device. Getting Started 1. To remove the cover, press the locking catch of the cover for example with a coin, Start to open the cover from its upper part. 2. To replace the cover, first place and close the catch in the lower part of the cover into the corresponding hole in the phone and then gently close the whole cover. E N G L S H I 21 Powering On Sequence Getting Started To get started with the phone 1. Press and hold key until you hear a tone. 2. Depending on setting PIN Code
[Menu 4-5-1], you can enter PIN code or not. 3. If your phone connects to a network, the network name will be displayed shortly. To turn off the phone In stand by mode, press and hold key until you hear a tone. E N G L S H 22 I Access Codes Getting Started You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes (except PUK and PUK2 codes) can be changed by using [Menu 4-5-6]. PIN code (4 to 8 digits) The PIN (Personal Identification Number) code protects your SIM card against unauthorized use. The PIN code is usually supplied with the SIM card. When PIN code is set Enable, your phone will request the PIN code every time it is switched on. On the contrary, when PIN code is set Disable, your phone connects to the network directly without the request PIN code. PIN2 code (4 to 8 digits) The PIN2 code, supplied with some SIM cards, is required to access some functions such as Advice of call charge, Fixed Dial number. These functions are only available if supported by your SIM card. PUK code (4 to 8 digits) The PUK(Personal Unblocking Key) code is required to change a blocked PIN code. The PUK code may be supplied with the SIM card. If not, contact your local service provider for the code. If you lose the code, also contact your service provider. E N G L S H I 23 Access Codes Getting Started PUK2 code (4 to 8 digits) The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you lose the code, also contact your service provider. Security code (4 to 8 digits) The security code protests the unauthorized use of your phone. It is usually supplied with the phone. This code is required to delete all phone entries and to activate Factory reset menu. The default number of Security code is 0000. You can also change it in Security menu. E N G L S H 24 I Phonebook Accessing the Menu To select a menu in phonebook, press
[Names] in standby mode and then scroll to a desired item. Name Name Search Add new Speed dial Voice list Description Description Allows you to search for a specific name, number. Allows you to add new names and numbers. Allows you to assign up to 8(2-9) one- touch dial allocations. Allows you to list phone numbers which is attached voice. Caller groups Allows you to show group list. Copy all Delete all Settings Information Allows you to copy entries from your Phone memory to SIM card or from SIM card to Phone memory. Allows you to erase all the data in either your phonebook or the SIM card to the phone memory. Allows you to set the memory and to search item by Variable, name and number. Allows you to check the status of memory, SDN(Service Dial Number), and Own number. E N G L S H I 25 1 2 3 4 5 6 7 8 9 Phonebook Accessing the Menu Search [Names 1]
(Calling from phonebook) 1. Open the phonebook first by pressing [Names] in a standby mode. 2. Search by Pressing [Select] to enter. 3. Depending on setting Search by, the below menu may not appear. Name Number 4. You can find an entry by name and number. 5. Select [Search]. 6. You can check the names and numbers by pressing [List]. 7. If you want to edit, delete, copy an entry, or to add the voice to one, select [Options]. The below menu will be displayed. Edit Delete Copy Call Voice
: You can edit the name, number, E-mail, and fax by pressing [OK].
: You can delete an entry.
: You can copy a entry from SIM to phone or from phone to SIM.
: You can call thru the chosen entry.
: You can add the voice to the entry or change the voice tag. Main number : You can select the one out of mobile, home, office that you often use. The main number will be displayed first, if you set this. E N G L S H 26 I Accessing the Menu Add new [Names 2]
You can add phonebook entry by using this function. Phone memory capacity is 200 entries. SIM card memory capacity depends on the service provider. You can also save 20 characters of name in the Phone memory, and you can save characters in the SIM card. the number of character is SIM dependent feature. 1. Open the phonebook first by pressing [Names] in standby mode. SIM 2. Scroll to highlight Add new, and press [Select] to enter. 3. Select the memory you want to save: SIM or Phone.
: You can add name and number for entry. a. Write a name to add. b. Press [OK], then you can input a number. c. Press [OK]. d. If you want to add the voice, press [Yes]. Phone : You can add name, mobile, home, office, fax no. and E-mail address. a. Write a name to add. b. Press [OK]. c. Enter the numbers following as mobile, home, office, and fax by pressing [OK]. Also you can input E-mail address. d. If you want to add the voice, press [Yes]. 27 E N G L S H I Phonebook You should speak a word within 2 seconds, and the phone asks you to speak it again to ensure the accuracy of voice recognition. After voice recognition has finished, Voice is attached automatically. Accessing the Menu Note
The voice can only be attached to main number which you set. For example, If you change main number voice will be automatically attached changed number.
You can add voice tag to phone number in SIM card. The voice tag can be erased removing or changing SIM card. And voice tag attached to phone number in SIM card may be attached to another phone number when you changed SIM card. Why? The answer is that SIM card doesnt contain information about voice tag. E N G L S H 28 I Accessing the Menu Speed dial [Names 3]
You can associate any of the keys 2 to 9 with a Name list entry. You can call directly by pressing this key for 2-3 seconds. 1. Open the phonebook first by pressing [Names] in a standby mode. 2. Scroll to Speed dial, then press [Select] to enter this menu. 3. Every Speed dial will be displayed. 4. If you want to add Speed dial, select <Is Empty>. Then, you can search the name in phonebook. 5. If you select allocated name by speed dial, you can view following the submenus. Change Undo speed dial
: You can change the allocation of speed dial number.
: You can delete the allocated speed dial number. Voice list [Names 4]
You can see all phone numbers which contain voice. You can also call directly by pressing [Send]. After selecting phone number by using and and press [Options], you can see following the submenus. Play Change : You can change voice which is attached to phone
: You can play voice which is attached to phone number. Delete Call number.
: You can delete voice which is attached to phone number.
: You can call by selecting this menu. E N G L S H I 29 Phonebook Accessing the Menu Caller groups [Names 5]
You can list up to 20 members per one group. There are 7 groups you can make lists to. 1. Press [Names] to enter into the phonebook in standby mode. 2. Scroll to Caller groups then press [Select] to enter this menu. 3. Every Group list will be displayed.: Family, Friend, Colleague, VIP, etc. 4. Select Group name that you want to manage by pressing
[Select]. 5. Then submenus below will be displayed. Add member You can add the number in Caller groups. View member
- You can view the number list in Caller groups.
- You can select the member you want by pressing
[Options] then you can enable the submenu such as Edit, Delete. Group ring tone
- You can set the ring tone depending on Group. Group icon
- You can set icon depending on Group. Change name
- You can change and edit the Group name. E N G L S H 30 I Accessing the Menu Note This menu "Change name" will be displayed only when you select "Empty". Copy all [Names 6]
You can copy/move entries from SIM card memory to Phone memory or from Phone memory to SIM card memory. 1. Open the phonebook first by pressing [Names] in standby mode. 2. Scroll to Copy all, then press [Select] to enter this menu. 3. Then submenus below will be displayed. SIM to Phone : You can copy the entry from SIM Card to Phone memory. Phone to SIM : You can copy the entry from Phone memory to SIM Card. Delete all [Names 7]
You can delete all entries in SIM, Phone, and Voice. This function requires security code. 1. Press [Names] to enter into the phonebook in standby mode. 2. Scroll to Delete all, then press [Select]. 3. Then select a memory to erase: SIM, Phone, Voice. 4. And then you will be requested to enter Security code. 5. Press [OK] or, press [Back] to cancel. 31 E N G L S H I Phonebook Accessing the Menu Settings [Names 8]
You can set preferred memory which includes Variable, SIM or Phone and preferred search which includes Variable, Name and Number. 1. Open the phonebook first by pressing [Names] in a standby mode. 2. Scroll to Settings, then Press [Select] to enter. 3. Then submenus below will be displayed. Set memory 1. Scroll to highlight Set memory, then press [Select] to enter. 2. The three submenus are displayed.
- Variable : If you select Variable, the phone asks you
- SIM
- Phone where to store whenever you add entries in Phonebook.
: If you select SIM, the phone stores entries to SIM directly without asking you where to store.
: If you select Phone, the phone stores entries to Phone directly without asking you where to store. E N G L S H 32 I Accessing the Menu Search by 1. Scroll to highlight Search by,then press [Select] to enter. 2. The three submenus are displayed.
- Variable : If you select Variable, the phone asks you how
- Name to search the entries.
: If you select Name, the phone searches entries by name.
- Number : If you select Number, the phone searches entries by number. Information [Names 9]
SDN (Service Dial Number) Use this function to access a particular list of services provided by your network operator (if supported by the SIM card). 1. Open the phonebook first by pressing [Names] in a standby mode. 2. Scroll to SDN, then Press [Select] to enter. 3. The names of the available services will be shown. 4. Use and to select a service. Press [Send]. E N G L S H I 33 Phonebook Accessing the Menu Check memory SIM Card 0/250 Handset 0/200 Back This feature allows you to see how many free and in-use are in your phonebook. 1. Open the phonebook first by pressing
[Names] in standby mode. Select Information by pressing [Select]. 2. Scroll to Check memory, then press
[Select] to enter this menu. Own number (SIM dependent) You can check your own number in SIM card. E N G L S H 34 I Menu Tree 1 Messages 1 Write message Send Save Use template Use namecard Add dictionary List dictionary 2 Inbox Delete Edit Forward Get number Reply Return call 3 Outbox Delete Edit Forward Get number 4 Info service 1 Read 2 Receive CB 3 Alert 4 Language 5 Topics Accessing the Menu 5 Voice messages 1 Listen to voice message 2 Voice mailbox number 6 Namecard 7 Templates 8 Settings 1 Message type 2 Validity period 3 Status report 4 remaining cost 5 SMS centre 9 Check memory 2 Call Register 1 Missed calls 2 Received calls 3 Dialled calls 4 Clear recent calls 5 Call charge 1 Call duration 2 Show call costs 3 Cost settings E N G L S H I 35 Menu Tree 3 Profiles 1 Vibrate only 2 Quiet 3 General 4 Loud 5 Headset 6 Car 4 Settings 1 Alarm clock 1 Enable 2 Disable 2 Date & Time 1 Date 2 Time 3 Phone settings 1 Display 2 Language 4 Call settings 1 Minute minder 2 Any key answer 3 Send number 4 Call waiting E N G L S H 36 I Accessing the Menu 5 Auto redial 6 Next incoming 5 Security settings 1 PIN code 2 Phone lock 3 Automatic key lock 4 Call barring 5 Fixed dial num. 6 Change code 6 Network settings 1 Automatic 2 Manual 3 Preferred 4 User define 7 Restore factory settings 5 Call Divert 1 All voice calls 2 If busy 3 If no reply 4 If unreachable 5 All data calls 6 All fax calls 7 Cancel all Accessing the Menu 8 Internet 1 Home 2 Bookmarks 3 Profiles 4 Go to URL 5 Cache settings 1 Clear cache 2 Cache check 6 Security certifications 7 Reset profiles 9 Sim Service This menu depends on SIM and the network services. 6 Scheduler 1 Add new 1 Schedule 2 Memo 2 View day 3 View all 4 Delete passed 5 Delete all 7 Fun & Tools 1 Game 2 Unit convert 3 Calculator 4 World time E N G L S H I 37 Messages [Menu 1]
Accessing the Menu Messages Select Back This menu includes functions related to SMS (Short Message Service), voice mail, as well as the networks service messages. Write message [Menu 1-1]
You can write and edit text message up to 1024 characters. Also, you can check the number of characters. 1. Enter the Message menu by pressing [Select]. 2. If you want to write a new message, select Write message in the menu. 3. Input the message by using eZi text. For details, see eZi text
(Page 41). 4. When you finish writing your message, press [Options]. Then following option menu will be displayed. E N G L S H 38 I Accessing the Menu Send Sends the text message. 1. If you want to send the text message, enter the number you want. 2. Your phone asks you to enter the number that you want to send it to. 3. After sending it, your phone asks whether you will store the edited message. 4. Press if you want to store it in Outbox and press if you dont want to. Save Stores the message in Outbox. 1. Your phone asks whether you will save the edited message. 2. Press if you want to save it in Outbox and press if you dont want to. Use template The template is pre-defined message. You can add the template of the list to the message when you edit it. Use namecard The items of the name card are a name, mobile, office, and memo. You can add a namecard to the message. E N G L S H I 39 Messages [Menu 1]
Accessing the Menu Add dictionary If you add a word you use often, you can input it by pressing a key once for each character. 1. Enter the menu. 2. Scroll to highlight Add dictionary, and then press [Select]. 3. Input a word, and then press [Add]. List dictionary You can view the list you already saved words in a dictionary. 1. Enter the menu. 2. Scroll to highlight List dictionary, and then press [Select]. 3. You can check the word list. 4. 5. If you want to delete all words in a list, select Delete all at the If you want to delete a word, press [Delete]. bottom of the list by pressing [Select]. E N G L S H 40 I Accessing the Menu eZi-Text The eZi text allows you to type easily and quickly. If you just press a key marked a character on the keypad, you can get a character you want. It is useful to make a word and a sentence. If you press key for a long time, you can change the type of language. Also, the phone supports four modes: eZi Mode, Numeric mode, Capital mode, and Small mode. If you want to change mode, press key. How to Use in eZi mode To input a character in eZi text mode, you just press each key once for a character you want. For example, to write Girl in eZi mode;
(For g)
(For i) 1024/1 ENG Ezi 1023/1 H ENG Ezi 1022/1 Hi ENG Ezi
(For r)
(For l) 1021/1 His ENG Ezi 1020/1 Girl ENG Ezi E N G L S H I 41 Messages [Menu 1]
Accessing the Menu How to use in Numeric mode To input a number in Numeric mode, you press a number key displayed on the keypad. 1024/1 123 Options Back How to use in Capital mode To input Capital letter, you press a character key displayed on the keypad. 1024/1 Options Back How to use in Small mode To input Small letter, you press a character key displayed on the keypad. 1024/1 abc Options Back Note
If you want to input a symbolic character, press key in each mode. E N G L S H 42 I Accessing the Menu Inbox [Menu 1-2]
When you receive a text message, your phone shows the symbol and stores it in the incoming message lists. Scroll to the desired message by using , . In addition, you can see Delete all for deleting all incoming messages at the bottom of the list. While reading the message, press [Options] to access the available options. Delete The selected message is deleted. Edit You can edit an incoming message and send or save the edited message. Forward You can forward the selected message to the other party. Get number If the selected message has the phone number, you can extract and save it in a phonebook. Also, you can call by this number. Reply You can reply to the sender by message. Return call You can call back to the sender who sent the message automatically. E N G L S H I 43 Messages [Menu 1]
Accessing the Menu Outbox [Menu 1-3]
When you enter this menu, you can see the message(s). Scroll to the desired message by using , and press to see the message. And if you want to exit Outbox menu, press . And if you want to exit outbox menu, press . In addition, you can see Delete all for deleting all outgoing messages at the bottom of the list. After reading message, press [Options] to access the following submenus. Delete The selected message is deleted. Edit You can edit an outgoing message and send or save it. Forward You can forward the selected message to the other party. Get number If the selected message has the phone number, you can extract and save it in a phonebook. Also, you can call by this number. E N G L S H 44 I Accessing the Menu Info Service [Menu 1-4]
(Dependent to network and subscription) Cell Broadcast messages (CB Message) are text messages by the network to GSM phone users. They provide general information such as weather reports, traffic news, taxis, pharmacies, and stock prices. Each type of information has the number; therefore, you can contact service provider. When you receive CB message, you can read it following sequence:
Read [Menu 1-4-1]
1. When you receive CB message, it will be displayed on the screen. You can read the message by scrolling , . 2. After reading the message, press to return to the standby mode. In addition, you can save it until another message is reached. Receive CB [Menu 1-4-2]
Yes If you select this menu, your phone will receive the Cell Broadcast message. No If you select this menu, your phone will not receive the Cell Broadcast message any more. E N G L S H I 45 Messages [Menu 1]
Accessing the Menu Alert [Menu 1-4-3]
Yes If you select this menu, your phone will beep when Cell broadcast message is received. No If you select this menu, your phone will not beep despite Cell broadcast message is received. Language [Menu 1-4-4]
You can select the language you want. Then your phone will receive the cell broadcast message in the language selected by you. You can select Cell broadcast language pressing [Select]. The language list which you selected already will be displayed with check box. Topics(Dependent to network and subscription)
[Menu 1-4-5]
Add [Menu 1-4-5-1]
If you select this menu, you will add the CB message category in Phone memory. View list [Menu 1-4-5-2]
If you select this menu, you can see CB message category. If you press [Options], you can edit and delete it. Active list [Menu 1-4-5-3]
You can select the CB message category in active list by pressing
[Select]. E N G L S H 46 I Accessing the Menu Voice messages [Menu 1-5]
You can listen to your voice message(s) and get the voicemail centre number. Listen to voice message [Menu 1-5-1]
You can call voicemail centre if you want to listen to voice message. Voice mailbox number [Menu 1-5-2]
You can get the voicemail if this feature is supported by the network service provider. When new voicemail is arrived, the symbol will be displayed on the screen. Please check with your network service provider for details of their service in order to configure the handset accordingly. 1. Press key for a long time in standby mode. 2. You can check the following submenus. Home [Menu 1-5-2-1]
The number dialed on the home network to listen to voicemail. Roam [Menu 1-5-2-2]
The number dialed when other networks to listen to voicemail. E N G L S H I 47 Messages [Menu 1]
Accessing the Menu Namecard [Menu 1-6]
Its for editing the namecard. The items of the namecard are a name, mobile, office, and memo. Edit Delete : You can delete a namecard.
: You can edit a namecard. Templates [Menu 1-7]
Its for editing pre-defined messages. You can see 11 pre-defined messages in the list. You can save 6 templates before you edit. But you can change them. The others are <Empty>. Edit Delete : You can delete the template.
: You can edit a template. Settings [Menu 1-8]
Message type [Menu 1-8-1]
Text, Voice, Fax, Natl. paging, X400, E-mail, ERMES Usually, the type of message is set to Text. You can convert your text into alternative formats, which are suitable for the device that will be received the message. Contact your service provider for the availability of this function. E N G L S H 48 I Accessing the Menu Validity period [Menu 1-8-2]
This network service allows you to set how long your text messages will be stored at the message center while attempts are made to deliver them to you. Status report [Menu 1-8-3]
If you set Yes in this menu, you can check whether your message is sent successfully or not. Remaining cost [Menu 1-8-4]
When a message is sent, it allows the person to whom you sent the message to reply and charges the cost of the reply to your telephone bill. SMS centre [Menu 1-8-5]
If you want to send the text message, you can get the address of SMS center thru this menu. Check memory [Menu 1-9]
If you select this menu, the phone shows an used memory and total amount of memory. The total memory is the sum of SIM and Phone memory. E N G L S H I 49 Call Register [Menu 2]
Accessing the Menu Call Register
<Press once>
Select Back Missed calls [Menu 2-1]
This menu shows recent missed call number(s). You can call by this number, save it or view date and time in this menu. Received calls [Menu 2-2]
You can check the recent received numbers. You can call by this number, save it or view date and time in this menu. Dialled calls [Menu 2-3]
You can check the recent dialled numbers. You can call by this number, save it or view date and time in this menu. E N G L S H 50 I Accessing the Menu Clear recent calls [Menu 2-4]
You can delete all call records. 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Call register. 3. Scroll to highlight Clear recent calls and press [Select] to enter. 4. The following four submenus : Missed calls, Received calls, Dialled calls, All calls. 5. Delete all message will be displayed and then press [Select], then, press one more time [Yes] to confirm. Call charge [Menu 2-5]
Within these submenus, you can view the duration and the call cost. Call duration [Menu 2-5-1]
This function allows you to view the duration of your Last Call, All Calls, Incoming Calls and Outgoing Calls in hours, minutes and seconds. You can also reset the call timers. 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Call register. 3. Scroll to highlight Call duration and press [Select]. The following 5 submenus: Last call, All calls, Received calls, Dialled calls and Reset all. E N G L S H I 51 Call Register [Menu 2]
Accessing the Menu Show call costs [Menu 2-5-2]
This function allows you to check the cost of your last call, all calls, remaining and reset the costs. To reset the cost, you need the PIN2 code. 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Call register. 3. Scroll to highlight Show call costs and Press [Select] to enter. The following 4 submenus: Last call, All calls, Remaining and Reset all. Note The actual call cost may be different depending on network features, billing, and tax. Cost settings [Menu 2-5-3] [SIM Dependent]
Set tariff [Menu 2-5-3-1]
You can set the currency type and the unit price. Contact your services providers to obtain charging unit prices. To select the currency or unit in this menu, you need the PIN2 code. 1. Press [Menu] in standby mode. 2. Press for direct access or Use and to enter Call register. 3. Scroll to highlight Cost settings and Press [Select] to enter. 4. Select Set tariff. E N G L S H 52 I Accessing the Menu Set credit [Menu 2-5-3-2]
This network service allows you to limit the costs of your calls by selected charging units. If you select Read, the number of remaining unit is shown. If you select Change, you can change your charge limit. 1. Press [Menu] in a standby mode. 2. Press for direct access or use and to enter Call register. 3. Scroll to highlight Cost settings and press [Select] to enter. 4. Select Set credit. Note When all units have been used, no calls can be made except emergency calls. Depending on SIM card, you need the PIN2 code to set a call cost limit. Auto display [Menu 2-5-3-3]
This network service allows you to see automatically cost of your last call. If you select Yes in Auto display menu, you can see the last cost when the call is released. 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Call register. 3. Scroll to highlight Cost settings and press [Select] to enter. 4. Select Auto display. 53 E N G L S H I Profiles [Menu 3]
Accessing the Menu Profiles
<Press twice>
Select Back In this menu, you can adjust and customize the phone tones for different events, environments and callers group. (e.g. When your phone is connected to the Handsfree kit, it'll be automatically set to the Car profiles menu and when your phone is connected to the Earmic, it'll be automatically set to Headset profiles menu.) 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Profiles. Note
In case that your phone is connected to Accessories such as Earmic and Handsfree, you cannot enable Profiles menu manually.
Profiles menu has Enable submenu except Headset and Car so that you can set Profiles menu at any time except above case. E N G L S H 54 I Accessing the Menu Vibrate only [Menu 3-1]
Enable : You can adjust the Profiles as Vibration if you need vibration mode. Quiet [Menu 3-2]
Enable : You can adjust the Profiles as Quiet if you are in Silent place. Change : You can change the values of Profiles submenus. General [Menu 3-3]
Enable : You can adjust the Profiles as General Change : You can change the values of Profiles submenus. Loud [Menu 3-4]
Enable : You can adjust the Profiles as Loud if you are in a noisy environment. Change : You can change the values of Profiles submenus. Headset [Menu 3-5]
Enable : You can adjust the Profiles as Headset when you put on a headset. Change : You can change the values of Profiles submenus. E N G L S H I 55 Profiles [Menu 4]
Profiles [Menu 3]
Accessing the Menu Accessing the Menu Car [Menu 3-6]
Enable : You can adjust the Profiles as Car when you activate Handsfree Kit. Change : You can change the values of Profiles submenus. A Group of Profiles submenus [Menu 3-x-x]
Profiles menu have the submenus as shown below. Incoming alert type [Menu 3-x-1]
Allows to set alert type for the incoming call for adjusting environment. Ringing tone [Menu 3-x-2]
Allows to set the ringing tone for adjusting environment. Ringing volume [Menu 3-x-3]
Allows to set the ringing volume for adjusting environment. Message alert [Menu 3-x-4]
Allows to alert when receiving a message for adjusting environment.:
Beep, Vibrator, and No alert. Key volume [Menu 3-x-5]
Allows to set the keypad volume for adjusting environment. E N G L S H 56 I Accessing the Menu Automatic answer [Menu 3-x-6]
Allows to set to answer automatically for adjusting environment. Please note that only Car and Headset has this sub menu so that you can activate this function. Disable Even though your phone is ringing, your phone will not answer automatically. After 5 sec After 5 seconds your phone will answer automatically. After 10 sec After 10 seconds your phone will answer automatically. Note
If you set the Handsfree kit to the phone, you cant activate the vibration related with Incoming alert type or Message alert menu. Therefore, in Car menu, you can view the following submenus;
- Incoming alert : Ring, Silent
- Message alert : Beep, No alert E N G L S H I 57 Settings [Menu 4]
Accessing the Menu Settings
<Press three times>
Select Back You can set the following menus for your convenience and preferences. 1. Press [Menu] in standby mode. 2. Press for direct access to enter Setting. Alarm clock [Menu 4-1]
You can set the phone to alarm at a specified within this menu. Enable [Menu 4-1-1]
You can set the time (Hour and Minute) for raising the alarm. 1. Enter the menu. 2. Select Enable by pressing [Select], and then enter the alarm time you want. 3. Press [OK]. 4. Select the repeat period: Once, Daily, Weekly, and Monthly. 5. If you set in Power off alarm, the alarm signal sounds at the time you set even if the phone is turned off. E N G L S H 58 I Accessing the Menu Disable [Menu 4-1-2]
You can cancel setting the alarm time. 1. Enter the menu. 2. Select Disable by pressing [Select]. 3. Clear alarm message will be displayed when the phone is set to alarm before. 4. If you want to cancel, press [Yes]. If not, press [No]. Date & Time [Menu 4-2]
Date [Menu 4-2-1]
Set date In this menu, you can set the date of your phone. 1. Enter the menu. 2. Select Set date by pressing [Select]. 3. Enter the number you want to set the date. 4. Press [OK]. Date format You can set the Date format in this menu. E N G L S H I 59 Settings [Menu 4]
Accessing the Menu Time [Menu 4-2-2]
The phone has its own clock. In this menu you can set the time and select between the 12-hour or 24-hour time formats. 1. Enter the menu. 2. Scroll to highlight Time by pressing [Select]. Set time:
You can set time of your phone in this menu. 1. Select Set time by pressing [Select]. 2. Enter the number you want to set the time. 3. Select the am/pm you want to set the time format by long pressing , key. 4. Press [OK]. Time format:
Your can select time format between 12-hour or 24-hour. 1. Scroll to highlight Time format by pressing [Select]. 2. Select 12 hour or 24 hour you want by pressing [Select]. E N G L S H 60 I Phone settings [Menu 4-3]
You can set the phone setting you want. Scroll to highlight Phone settings menu, and then press [Select]. Accessing the Menu Display [Menu 4-3-1]
Screen saver [Menu 4-3-1-1]
If you don't activate any function for 20 seconds, the picture will be displayed in a standby mode. Welcome note [Menu 4-3-1-2]
This menu allows you to set the message, which is shown briefly when the phone is switched on. 1. Select Settings - Phone settings - Display - Welcome note. 2. Your own text can be displayed. If you select this item, your phone asks you to edit the message. Backlight [Menu 4-3-1-3]
You can set the light-up duration you want whenever you press a key. LCD contrast [Menu 4-3-1-4]
You can set the brightness of LCD you want by pressing ,
. Language [Menu 4-3-2]
You can select the language that will be displayed on the phone. E N G L S H I 61 Settings [Menu 4]
Accessing the Menu Call settings [Menu 4-4]
You can set the menu relevant to a call by pressing [Select] in Setting menu. Minute minder [Menu 4-4-1]
If you select Yes, you can check the call duration by beep sound every minute during a call. Any key answer [Menu 4-4-2]
Yes [Menu 4-4-2-1]
If you select this menu, you can receive an incoming call by pressing any key except key and key. No [Menu 4-4-2-2]
If you select this menu, you can receive an incoming call by
[Answer] or . Send number [Menu 4-4-3]
(network and subscription dependent) Yes [Menu 4-4-3-1]
If you select this, you can send your phone number to the other party. That is, your phone number will be displayed on receivers phone. No [Menu 4-4-3-2]
If you select this, you cant send your phone number. Default [Menu 4-4-3-3]
If you select this menu, this phone will be set to the default value. E N G L S H 62 I Call waiting [Menu 4-4-4]
(network dependent) If this service is available, you can accept a waiting (incoming) call. Accessing the Menu Enable [Menu 4-4-4-1]
Activating the corresponding service. Disable [Menu 4-4-4-2]
Deactivating the corresponding service. Check status [Menu 4-4-4-3]
Checking the Status of the service. Auto redial [Menu 4-4-5]
Yes [Menu 4-4-5-1]
When this function is set on, your phone will make up to 10 attempts for a call after not connecting. No [Menu 4-4-5-2]
Your phone will not make any attempts to connect the call after not connecting. Next incoming [Menu 4-4-6]
(network dependent) In case of Single Numbering Service, you can use the phone and a connected PC to send and receive fax, data, and voice. If you select the mode, you can receive data, fax, or voice each mode. Once you enter this menu, you following options are displayed. E N G L S H I 63 Accessing the Menu Settings [Menu 4]
Voice You can receive the voice call. Data You can receive the data call. Fax You can receive the fax call. Note
Single numbering service means that the number of fax or data service is identical with the number of voice service. And, these modes depend on network feature. Security settings [Menu 4-5]
PIN code [Menu 4-5-1]
In this menu, you can set the phone to ask for the PIN code of your SIM card when the pone is switched on. If this function is activated, youll be requested to enter the PIN code. 1. Press [Menu] in standby mode. 2. Press key for direct access or use and to enter Settings. 3. Scroll to highlight Security settings menu. 4. Select PIN code by pressing [Select]. 5. You can view the following submenus. Enable : Enable PIN code request. Disable : Disable PIN code request. E N G L S H 64 I Accessing the Menu Phone lock [Menu 4-5-2]
You can use security code to avoid unauthorized use of your phone. When you switch on your phone, Your phone will request security code always if you set phone lock to "Enable". if you set phone lock to "Automatic". Your phone will request security code only when you change your SIM card. Enable Disable Automatic Automatic key lock [Menu 4-5-3]
When you enable Automatic key lock, keypad will be lock automatically on a idle screen after 25 seconds without any key requesting. Enable Disable Note
If you want to lock your phone keypad manually, enter Top menu and press key.
If you want to unlock your phone keypad, press [unlock] key and then press key. But if you enabled Automatic key lock before, your phone keypad will be unlock and then after 25 seconds the keypad will be lock up again automatically. E N G L S H I 65 Settings [Menu 4]
Accessing the Menu Call barring [Menu 4-5-4]
The Call barring service prevents your phone from making or receiving certain category of calls. This function requires the call barring password. You can view the following submenus. All outgoing:
The barring service of all outgoing calls. Outgoing Intl:
The barring service of all outgoing international calls. Outg. intl roam:
The barring service of all international outgoing calls except home network. All incoming:
The barring service of all incoming calls Inc when roam:
The barring service of all incoming calls when roaming Cancel all:
You can cancel all barring service. Change passwd:
You can change the password for Call Barring Service. E N G L S H 66 I Accessing the Menu Fixed dial num. [Menu 4-5-5] (SIM dependent) You can restrict your outgoing calls to selected phone number. The numbers are protected by your PIN2 code. 1. Press [Menu] in standby mode. 2. Press key for direct access or use and to enter Settings. 3. Scroll to highlight Security settings menu. 4. Select PIN code by pressing [Select]. 5. If the PIN 2 code is correct, you can view the following submenus.
: You can restrict your outgoing calls to selected phone number.
: you can call without restricting phone number. Off On Number list : You can view the number list saved as Fixed dial number. E N G L S H I 67 Settings [Menu 4]
Accessing the Menu Change code [Menu 4-5-6]
You can change the access codes: PIN code, PIN 2 code and Security code. 1. Press [Menu] in standby mode. 2. Press key for direct access or use and to enter Settings. 3. Scroll to highlight Security settings menu. 4. Select Change code by pressing [Select]. 5. If you want to change the PIN/PIN2/Security code, input your original code, and then press [OK]. Input new PIN/PIN2/Security code, and verify the them. 6. Network settings [Menu 4-6]
You can select the network which you will be registered either automatically or manually. Usually, the selection of the network used by the handset is automatic. Automatic [Menu 4-6-1]
The phone automatically selects network which is available in the your area. Manual [Menu 4-6-2]
The phone will find the list of available networks and show you them. Then you can select the network which you want to use if this network has a roaming agreement with your home network operator. E N G L S H 68 I Accessing the Menu Preferred [Menu 4-6-3]
You can set a list of preferred networks the handset should attempt to register with first, before attempting to register to any other networks. This list is created from the handsets predefined list of known networks. User define [Menu 4-6-4]
You can add entries or delete new ones from the network list. This can even include new networks whose network codes are not known to the handset. To do this, select and then enter the network code, country code and network name. Restore factory settings [Menu 4-7]
You can set the handset to the default configuration by selecting the Settings/Restore factory settings option, and then confirming this selection. E N G L S H I 69 Call Divert [Menu 5]
(network and subscription dependent) Accessing the Menu Call Divert Select Back
<Press four times>
The Call divert service allows to divert incoming voice calls, fax calls, and data calls to another number. For details, contact your service provider. 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Call Divert. All voice calls [Menu 5-1]
Diverts voice calls unconditionally. If busy [Menu 5-2]
Diverts voice calls when the phone is in progress. If no reply [Menu 5-3]
Diverts voice calls which you do not answer. If unreachable [Menu 5-4]
Diverts voice calls when the phone is switched off or out of range. E N G L S H 70 I Accessing the Menu All data calls [Menu 5-5]
Diverts to a number with a PC connection unconditionally. All fax calls [Menu 5-6]
Diverts to a number with a fax connection unconditionally. The submenus [Menu 5-x-x]
Call Divert menus have the submenus as shown below. Enable [Menu 5-x-1]
Activating the corresponding service. Voicemail box [Menu 5-x-x-1]
Forwards to message center. This function is not included in All data calls and All fax calls menus. Other number [Menu 5-x-x-2]
Inputs the number for diverting. Favorite [Menu 5-x-x-3]
Shows the list of 5 diverting numbers. Note
You can select the number you want in Favorite menu. E N G L S H I 71 Accessing the Menu Call Divert [Menu 5]
(network and subscription dependent) Disable [Menu 5-x-2]
Deactivating the corresponding service. Check status [Menu 5-x-3]
Checking the Status of the corresponding service. Cancel all [Menu 5-7]
Cancels all call divert service. E N G L S H 72 I Scheduler [Menu 6]
Accessing the Menu Scheduler
<Press five times>
Select Back When you enter this menu a Calendar will show up. On top of the screen there are sections for date and icons. Whenever you change the date, the calendar will be updated according to the date. And square cursor will be used to locate the certain day. If you see under bar on the calendar, it means that there is a schedule that day. This function helps to remind you of your schedule and memo. The phone will sound an alarm tone if you set alarm for the note. For changing the day, month, and year. Key Description Yearly Monthly If you press these keys shortly, you can set the alarm daily. In case of pressing for a long time, you can set it weekly. E N G L S H I 73 Scheduler [Menu 6]
Accessing the Menu Add new [Menu 6-1]
You can edit maximum 30 characters. You can take a note. You can choose the following types of note. You can make up to maximum 20 notes. Schedule [Menu 6-1-1]
Input the subject, the schedule time, the repeat time, alarm time by pressing [Select]. Repeat [Menu 6-1-1-1]
: no repeat.
: repeat schedule daily for 5 days.
- Once
- Daily
- Weekly : repeat schedule weekly for 5 weeks.
- Monthly : repeat schedule monthly for 5 months.
- Yearly
: repeat schedule yearly for 5 years. Alarm time [Menu 6-1-1-1-1]
- On time
- 10 min before : alarm before 10 minutes from the schedule you
: alarm on time you set already. set already.
- 30 min before : alarm before 30 minutes from the schedule you
- 1 hour before
- 1 day before set already.
: alarm before 1 hour from the schedule you set already.
: alarm before 1 day from the schedule you set already. E N G L S H 74 I Accessing the Menu Memo [Menu 6-1-2]
1. Select Add new by pressing [Select]. 2. Scroll to highlight Memo. 3. Press [Select]. 4. Input the memo and then press [Select]. View day [Menu 6-2]
Shows the note for the chosen day. Use , to browse through the note lists. If you set alarm for the note, Alarm watch is displayed. Press [Options] to delete, edit the note you selected. View all [Menu 6-3]
Shows the notes that are set for all days. Use , to browse through the note lists. Pressing [Options] allows access to the same menu as in 'View day'. Delete passed [Menu 6-4]
You can delete for the last schedule already is notified you. Delete all [Menu 6-5]
You can delete for the all note(s). E N G L S H I 75 Fun & Tools [Menu 7]
Accessing the Menu Fun & Tools Select Back
<Press six times>
Game [Menu 7-1]
Your phone offers you enjoyable games to play with.
[Soft 1 Key]
: Start Game Note The Control keys are different for each game. But each game has screens to explain the main control key. Other common control keys are below.
[Common Key Function]
[Soft 1 Key]
[Up/Down, numeric key]
: Level control
: Save score
[Soft 2 Key]
[Star Key]
: Backlight
: Pause
[END]
[CLR]
: Back
: Exit E N G L S H 76 I Accessing the Menu Unit convert [Menu 7-2]
0.00 cm 0.000 cm Change Back This converts any measurement into a unit you want. There are 4 types that can be converted into units: Length, Area, Weight, and Volume. 1. You can select one of four unit types by pressing [Select] key. 2. Select the unit you want to convert by pressing and . 3. You can change unit by pressing [Change] key. 4. You can input the prime number after the decimal place by pressing key. 5. You can delete the number you want by pressing . 6. Press key or [Back] key if you want to end the process for converting the value. E N G L S H I 77 Fun & Tools [Menu 7]
Accessing the Menu Calculator [Menu 7-3]
This contains the standard functions such as +, -, *, : Add, Subtract, Multiply, Divide. 1. Input the numbers by pressing numeric keys. 2. Press [Options] to select menu you want such as Add, Subtract, Multiply, Divide, Negative, Decimal point, Equals. 3. You can view the result by pressing [Options] key and select equals. 4. If you want to continue the calculation, repeat the process. 5. You can delete the number or sign you want by pressing . 6. Press key if you want to end the calculation process. World time [Menu 7-4]
You can view the time for each city around the world. when you press , shortly, you can view the city belonged to the different time zone and when you press , long, you can view the all of city on the same time zone. If you want to select the country you want, press [set] key. E N G L S H 78 I Internet [Menu 8]
Accessing the Menu Internet
<Press seven times>
Select Back Your phone supports services based on Wireless Application Protocol(WAP). You can access services supported by your network. The services menu allows you to get the information such as news, weather reports, and flight times. Home [Menu 8-1]
You can connect to the configured homepage of the activated profile. Bookmarks [Menu 8-2]
When you enter this menu, you can see the bookmarks. Then press button to access available option, or press to exit it. Connect : Connect to selected bookmark. Add new : Add a new bookmark manually. Edit Delete
: Edit the title and the address of the selected bookmark.
: Delete the selected bookmark from the bookmark list. E N G L S H I 79 Internet [Menu 8]
Profiles [Menu 8-3]
You can make up to 5 profiles and activate only one of them. Scroll to the desired profile and press to access available options. Accessing the Menu Activate [Menu 8-3-1-1]
You can activate the selected profile. Settings [Menu 8-3-1-2]
You can edit and change WAP settings of the selected profile.
- Homepage [Menu 8-3-1-2-1]
This setting allows you to enter the address (URL) of the site you want to use as homepage. You do not need to type "http://" in front of each URL as the WAP Browser will automatically add it.
- Display image [Menu 8-3-1-2-2]
You can select whether images on WAP cards are displayed or not.
- Conn. type [Menu 8-3-1-2-3]
The options for connection type are Continuous or Temporary and depend on the gateway. Continuous [Menu 8-3-1-2-3-1]
A confirmed delivery mechanism but generates more network traffic. Temporary [Menu 8-3-1-2-3-2]
A non-confirmed (connectionless) service. E N G L S H 80 I Accessing the Menu
- Secure setting [Menu 8-3-1-2-4]
The options are On and Off depend on the gateway you are using.
- Gateway info. [Menu 8-3-1-2-5]
Most of WAP gateways do not require a User ID and Password. If your gateway need them to connect to it, then your network should provide them, and you must set them up correctly before trying to browse a WAP site.
- Data setting [Menu 8-3-1-2-6]
These values of setting are provided by your network. IP address
: Enter the IP address of the WAP gateway you are using to access. Dial number : Enter the telephone number to dial to access your Call type Call speed User ID Password WAP gateway.
: Select the type of data call.: Analogue or ISDN
(Digital).
: The speed of your data connection.
: The user identity for your dial-up server (and NOT the WAP gateway).
: The password required by your dial-up server
(and NOT the WAP gateway) to identify you.
- Linger time [Menu 8-3-1-2-7]
You need to select one of 5 timeout periods. After selecting one of them, the service will be unavailable if any data wasn't input or transferred. E N G L S H I 81 Internet [Menu 8]
Rename [Menu 8-3-1-3]
Edit the Profile Name. E-mail server [Menu 8-3-1-4]
Accessing the Menu Save the URL of the E-mail server that you frequently use.
- Connect [Menu 8-3-1-4-1]
Connect to the E-mail server that you configured.
- Edit address [Menu 8-3-1-4-2]
Edit the URL of the E-mail server. Go to URL [Menu 8-4]
You can directly connect to the site that you want. You need to enter the specific URL that you want to directly connect. E N G L S H 82 I Cache settings [Menu 8-5]
You can remove the contents of Cache memory and change the Cache check mode. Accessing the Menu Clear cache [Menu 8-5-1]
The contents of Cache memory will be removed. Cache check [Menu 8-5-2]
You can change the time for checking the Cache memory. Always [Menu 8-5-2-1]
The cache is always checked whenever URL is loaded or navigated. Start only [Menu 8-5-2-2]
The cache is only checked when the WAP is started. Off [Menu 8-5-2-3]
The cache is never checked. Security certifications [Menu 8-6]
A list of the available certificates is shown. Reset profiles [Menu 8-7]
You can reset all the current settings of profiles to the factory default. 83 E N G L S H I Internet On-line menu Accessing the Menu If you are on line, you can see the following menus. Home This is the same as [Menu 8-1]. Reload This reloads the current page. Bookmarks This is the same as [Menu 8-2]. Save as bookmarks Save the current URL as a bookmark. You can also edit the bookmark title. Go to URL Same as [Menu 8-4]. Go to e-mail server Connect to the E-mail server that you configured. Set as e-mail server Save the current URL as an E-mail server. E N G L S H 84 I How to Use Data and Fax call Additional Functions To be able to data or fax service, you need the communicate software such as a data or a fax program. Before using these functions, you need to connect your phone to a computer or make sure that your phone is in connection with a compatible device. Sending Data or Fax Calls 1. Connect your computer to the phone. 2. After starting the communicate software, make a call and transmit a data or fax. 3. After the data or fax transmission, you can end the call by just ending of the communicate software, pressing [End] . Receiving Data or Fax Calls If you have separate numbers for voice, data and fax calls, your phone recognizes the type of call. Receiving Data or Fax Calls Separate numbers
(Multi-numbers) To use a data or a fax service, the display shows which type of call you are receiving. To receive a data or fax call 1. Connect your computer to the phone. 2. After starting the communicate software, accept a call and receive a data or fax (if it is not answered automatically). 3. After the data or fax reception, you can end the call by just ending of the communicate software, pressing [End]. 85 E N G L S H I How to Use Data and Fax call Additional Functions Receiving Data or Fax Calls Single number If you have a SIM card that does not support separate voice, data and fax numbers, the phone does not recognize the type of incoming call. To use a data or a fax service, make sure that you want to receive a data or fax call mode. You first have to set the phone to one of these options in the call mode (Settings Call Setting Next Incoming) sub menu. To receive a data or fax call 1. Press [Menu] in standby mode. 2. Select the Settings Call setting Next Incoming. 3. Select the call type you want (Voice, Data or Fax) and press
[Select]. 4. Connect your computer to the phone. 5. After starting the communicate software, accept a call and receive a data or fax (if it is not answered automatically). 6. After the data or fax reception, you can end the call by just ending of the communicate software, pressing [End]. Once you have set your phone for a specific incoming call, it remains set until you change it. E N G L S H 86 I In call Menu During a call, the following menus will be displayed, not in a standby mode. Additional Functions 1 During a call 1-1 Putting a Call on Hold You can place a call on hold or retrieve by just pressing the
[Send] key. When a call is made or answered, press the [Send]
key to place it on hold. When a call is held, press the [Send] key to make it active. 1-2 Making a Second Call You can get a dial number from phonebook to make a second call. Press [Names] key then select Search. To save the dial number into phonebook during call, press [Names] key then select Add new. 1-3 Swapping Between Two Calls To switch between two calls, select the [Options] key, then select Swap or just press [Send] key. You can make one of two calls focused by pressing up/down arrow key. If you want to end one of two calls, make the call you want to end focused, then press [End] key when the call you want to end is focused. E N G L S H I 87 In call Menu Additional Functions 1-4 Answering an Incoming Call To answer an incoming call, simply press the [Send] key. The handset is also able to warn you of an incoming call while you are already in a call. A tone sounds in the earpiece, and the display will show that a second call is waiting. If Call Waiting is on, you can put the first call on hold and answer the second, by pressing [Send] or by selecting the [Answer]
key, then Hold & Answer. You can end the current call and answer the waiting call by selecting the [Menu] key, then End & Answer. 1-5 Rejecting an Incoming Call You can reject an incoming call without answering by simply pressing the [End] key. When in a call you can reject an incoming call by pressing the
[Menu] key and selecting Multiparty/Reject or by pressing
[End] key. 1-6 Controlling the volume during a call You can control the volume during a call by pressing [Options]
key and selecting Volume. 1-7 Muting the Microphone You can mute the microphone during a call by pressing the
[Options] key then selecting Mute. The handset can be unmuted by pressing the When the handset is muted, the caller cannot hear you, but you can still hear them.
[Unmute] . E N G L S H 88 I Additional Functions 1-8 Switching DTMF Tones on During a Call To turn DTMF tones on during a call, for example, to allow your handset to make use of an automated switchboard, select the
[Options] key, then DTMF On. DTMF tones can be turned off the same way. 1-9 Calling up the Main Menu The Messages and SIM Tool kit main menu options can be reached from the in-call menu by selecting the [Options] key, then Main Menu. SIM Tool kit menu is shown only when SIM in the handset supports SIM Tool kit service. 2 Multiparty or Conference Calls The multiparty or conference service provides you with the ability to have a simultaneous conversation with more than one caller, if your network service provider supports this feature. A multiparty call can only be set up when you have one active call and one call on hold, both calls having been answered. Once a multiparty call is set up, calls may be added, disconnected or separated (that is, removed from the multiparty call but still connected to you) by the person who set up the multiparty call. These options are all available from the in-call menu and are listed in Section. The maximum callers in a multiparty call is five. Once started, you are in control of the multiparty call, and only you can add calls to the multiparty call. 89 E N G L S H I In call Menu Additional Functions 2-1 Making a Second Call You can make a second call while you are already in a call. To do this, enter the second number and press [Send]. When you get second call the first call is automatically put on hold. You can swap between calls by selecting the [Options] key then Swap. 2-2 Setting up a Multiparty Call You can connect a call on hold to the currently active call to form a multiparty call by selecting the [Options] key then Multiparty/Join all. 2-3 Putting the Multiparty Call on Hold To put a multiparty call on hold, select the [Options] key then Multiparty/Hold all. 2-4 Activate the Multiparty Call on Hold To make a multiparty call on hold active, select the [Options] key then Multiparty/Join all. 2-5 Adding Calls to the Multiparty Call To join an active call to the held multiparty call, select the
[Options] key then Multiparty/Join all. 2-6 Displaying Callers in a Multiparty Call To scroll through the numbers of the callers who make up a multiparty call on the handset screen, press and keys. E N G L S H 90 I Additional Functions 2-7 Putting a Member of a Multiparty Call on Hold To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the [Options] key then Multiparty/Exclude. 2-8 A Private Call in a Multiparty Call To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the
[Options] key and Multiparty/Private to put all the other callers on hold. 2-9 Ending a Multiparty Call The currently displayed caller of a multiparty call can be disconnected by pressing the [End] key. To end a multiparty call, press the [Options] key then select Multiparty/End multiparty. Selecting the [Options] key then Multiparty/End all, will end all the active and held calls. 2-10 Explicit Call Transfer (ECT) If you have one caller on hold and another active call, you may connect one call party to another call party and then leave the call. This is done by selecting the Multiparty/Transfer option from the in-
call menu. E N G L S H I 91 Care and Maintenance When using this unit, basic safety precautions as below should be always followed. Do not touch the adapter with wet hands. Do not disassemble this unit. (Take it to a qualified service technician when repair work is required.) Away from electrical appliance such as a TV, radio or personal computer. The unit should be situated from heat sources such as radiators or cookers. Do not drop. Do not subject this unit to mechanical vibration or shock. The coating of the phone may be damaged if covered with wrap or vinyl wrapper. Use dry cloth to clean the exterior of the unit. (Do not use solvent such as benzene, thinner or alcohol.) Do not subject this unit to excessive smoke or dust. Do not keep the phone next to credit cards or transport tickets; it can be affect the information on the magnetic strips. Do not tap the screen with a sharp object; otherwise, it may damage the phone. Do not expose the phone to liquid or moisture. I Caring for the Battery You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the batterys performance. Use only LG batteries and chargers. LG chargers are designed to maximize the battery life. Do not disassemble or short-circuit the battery pack. Keep the metal contacts of the battery pack clean. E N G L S H 92 I Replace the battery when it no longer provides acceptable performance. The battery pack may be recharged hundreds of times until it needs replacing. Recharge the battery if it has not been used for a long time to maximize usability. Do not expose the battery charger to direct sunlight or use it in high humidity, such as the bathroom. Do not leave the battery in hot or cold places, this may deteriorate the battery performance. I FCC RF Exposure Information WARNING! Read this information before operating the phone. In August 1996, the Federal Communications (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. I CAUTION Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement of antenna. E N G L S H I 93 Care and Maintenance I Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the users body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain 1.5 cm separation distance between the users body and the back of the phone, and have not been tested for typical body-
worn operations may not comply with FCC RF exposure limits and should be avoided. I Vehicle Mounted External Antenna (optional, if available) A minimum separation distance of 8 inches (20 cm) must be maintained between the user/bystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov I For Your Safety FCC Part 15 Class B Compliance This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation. E N G L S H 94 I Technical Data General Product Name : W3000S Ambient Temperatures Max : +55C Min : -10C E N G L S H I 95 Memo E N G L S H 96 I
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-05-07 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-05-07
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
W3000S
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 1900MHz GSM Cellular Phone | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power is EIRP. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by Sharp or any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device, including its antenna whether extended or retracted, and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Head: 0.843 W/kg; Body-worn: 0.529 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compliance Certification Services Inc
|
||||
1 | Name |
S******** C********
|
||||
1 | Telephone Number |
408-4******** Extension:
|
||||
1 | Fax Number |
408-4********
|
||||
1 |
s******@ccsemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 0.5807000 | 2.5000000000 ppm | 266KGXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC