all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
users manual | Users Manual | 1.29 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | users manual | Users Manual | 1.29 MiB |
Test Report No.: GETEC-E3-05-029 FCC Class B Certification APPENDIX H
: USERS MANUAL EUT Type: 20 LCD TV/Monitor FCC ID: BEJT20DL75A E: ENGLISH F: FRANAIS S: ESPAOL E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y OWNER'S MANUAL LCD Color Television e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y 15DL15 20DL75 Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model number:
Serial number:
s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. (See item 20 on page 4.) NOTE TO CATV INSTALLERS This is a reminder to call the CATV system installers attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 25 and 26 on page 4. FCC Declaration of Conformity Compliance Statement (Part 15):
The Toshiba 15DL15/20DL75 LCD Color Televisions comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470. Ph: (973) 628-8000 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the users authority to operate this equipment. 2 Child Safety It Makes A Difference Where Your TV Stands Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:
The Issue
If you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or inappropriately situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury. Toshiba Cares!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
The Consumer Electronics Association formed the Home Entertainment Support Safety Committee, comprised of TV and consumer electronics furniture manufacturers, to advocate childrens safety and educate consumers and their families about television safety. Tune Into Safety
One size does NOT fit all! Use appropriate furniture large enough to support the weight of your TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to secure your furniture to the wall (but never screw anything directly into the TV).
Carefully read and understand the other enclosed instructions for proper use of this product.
Do not allow children to climb on or play with furniture and TVs.
Avoid placing any item on top of your TV (such as a VCR, remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of the home with your family and friends. Thank you!
2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org CEA is the Sponsor, Producer and Manager of the International CES Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Wide plug 10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 16) CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure. 3 Installation, Care, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV:
17) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the users authority to operate this equipment under the rules of the Federal Communications Commission. 18) DANGER: RISK OF SERIOUS PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV. 19) Never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration. 20) Always place the TV Sturdy tie (as short as possible) Hooks on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy tie from the hooks on the rear of the TV pedestal to a wall, pillar, or other immovable structure. Make sure the tie is tight, secure, and parallel to the floor. Leave a space of at least 4 inches around the TV. TV side TV top 21) Never expose the apparatus to dripping or splashing liquid or place items such as vases, aquariums, any other item filled with liquid, or candles on top of the TV. 22) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:
on a bed, sofa, rug, or similar surface;
too close to drapes, curtains, or walls; or in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. 23) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse. 24) Never overload wall outlets and extension cords. 26) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code). Ground clamp Electric service equipment Ground clamps Antenna lead-in wire Antenna discharge unit
(NEC Section 810-20) Grounding conductors
(NEC Section 810-21) Power service grounding electrode system (NEC Art 250 Part H) 27) DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH!
Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits. Never attempt to install any of the following during lightning activity:
a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system. Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:
28) If you use the TV in a room whose temperature is 32 F (0 C) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction. 29) Always unplug the TV before cleaning. Wipe the display panel surface gently using only a soft cloth (cotton, flannel, etc.). A hard cloth may damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Do not spray volatile compounds such as insecticide on the cabinet. This may cause a discoloration or damage the cabinet. 25) Always operate the TV with a 120V AC, 60Hz power source only. 30) 120V AC WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the TV cabinet slots. 4 31) While it is thundering, do not touch the connecting cables or apparatus. Failure to follow this instruction may result in electric shock. 32) For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time. 33) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center. 34) WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE !
Never strike the screen with a sharp or heavy object. 35) The LCD screen of this product can be damaged by Ultraviolet Radiation from the sun. When selecting a location for the television, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window. Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 29 on page 4. Important notes about your LCD TV The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction. Therefore, TACP/TCL is not responsible for perceived defects resulting from these symptoms. 1) An afterimage (ghost) may appear on the screen if a fixed, non-moving image is displayed for a long period of time. The afterimage is not permanent and will disappear in a short period of time. 2) The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (that does not light, that remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a gun type of joystick at an on-screen target may not work on this TV. Service 36) WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center. 37) If you have the TV serviced:
Ask the service technician to use only replacement parts specified by the manufacturer. Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition. 38) The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury. When the TV reaches the end of its useful life, dispose of the used TV by the approved method for your area, or ask a qualified service technician to properly dispose of the TV. Note: The lamp unit contains mercury, the disposal of which may be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronics Industries Alliance (www.eiae.org). 5 Adjusting the sound ....................................................... 26 Muting the sound ................................................... 26 Selecting stereo/SAP broadcasts .............................. 26 Using the WOW surround sound feature ........... 27 Selecting the audio mode ........................................ 27 Adjusting the sound quality .................................... 28 Using the StableSound feature .............................. 28 Using the PC setting feature .......................................... 29 Using the Auto off feature .............................................. 30 Displaying on-screen information .................................. 30 Understanding the last mode memory feature ................ 30 Appendix ................................................................... 31 Specifications ................................................................. 31 Troubleshooting ............................................................. 32 Limited United States Warranty ..................................... 33 Limited Canada Warranty .............................................. 34 Index .......................................................................... 35 Introduction................................................................ 7 Welcome to Toshiba ......................................................... 7 Supplied accessories ......................................................... 7 Connecting the power cord .............................................. 7 Exploring your new TV ................................................... 8 Rear terminal cover ................................................... 9 Cable clamper ........................................................... 9 Adjusting the TV viewing angle ................................ 9 Connecting your TV ................................................ 10 Connecting an antenna or cable TV ............................... 10 Connecting a VCR ........................................................ 11 Connecting a cable converter box .................................. 11 Connecting a cable converter box and a VCR ................ 11 Connecting a DVD player with ColorStream
(component video) and a VCR ...................................... 12 Connecting a DTV receiver/set-top box with ColorStream (component video) and a VCR ................ 13 Connecting an audio system .......................................... 14 Connecting a camcorder ................................................ 14 Connecting a personal computer (PC) ........................... 15 Using the remote control ...................................... 16 Learning about the remote control ................................. 16 Installing the remote control batteries ............................ 16 Remote control effective range ....................................... 16 Setting up your TV .................................................. 17 Learning about the menu system ................................... 17 Changing the on-screen display language ....................... 18 Adding channels to the TVs memory ............................ 18 Programming channels automatically ...................... 18 Adding and erasing channels manually .................... 19 Changing channels ........................................................ 19 Programming your favorite channels .............................. 19 Using the TVs features.......................................... 20 Switching between two channels using Channel Return ........................................................................... 20 Using the Blue screen feature ......................................... 20 Selecting the video input source ..................................... 20 Using the V-Chip menu ................................................. 21 V-Chip rating and categories ................................... 21 V-Chip (Parental menu) setup ................................ 22 Adjusting the picture ..................................................... 23 Selecting the picture mode ...................................... 23 Adjusting the picture quality ................................... 23 Using the closed caption feature ..................................... 24 To turn on or off the Closed Caption feature .......... 25 Using the Panel lock feature ........................................... 25 Setting the sleep timer .................................................... 25 6 Introduction Welcome to Toshiba Thank you for purchasing this Toshiba LCD TV. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. The model and serial numbers are on the back of your TV. Write these numbers in the space provided on the front cover of this manual for your records. Instructions in this manual are based on using the remote control. You also can use the controls on the TV if they have the same name as those referred to on the remote control. Please read all the safety and operating instructions carefully, and keep this manual for future reference. Supplied accessories Check that you have the accessories and items shown. Owners Manual
(This book) Remote control Batteries for the remote control R03 (AAA) 2 Power cord E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y Connecting the power cord Back of TV NOTE: RISK OF EQUIPMENT DAMAGE !
Never plug in any power cords until you have finished connecting all equipment. Wall outlet 120V AC 60Hz Power cord (supplied)
* The power cord supplied with this product is to be used in United States and Canada only. s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 7 Exploring your new TV You can operate your TV by using the buttons on the top panel or the remote control. The A/V terminals for connecting other equipment to your TV are on the back panel and side panel (see illustrations below). Also see Connecting your TV on pages 10-15. Model 20DL75 is used in this manual for illustration purpose. Top panel Volume - +
TV/VIDEO Channel z y POWER n o i t c u d o r t n I Left Side Terminals TV front VIDEO-2 INPUT HEADPHONE jack Power indicator Remote sensor Back Remote control MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH Terminal cover removed.
(see page 9) Power cord Cable clamper AUDIO OUT VIDEO 1 (ColorStream) PC AUDIO IN ANT IN RGB/PC IN 8 Rear terminal cover The connection panel is hidden behind the terminal cover. 1. Remove the cover. Release the two hooks on the bottom of the cover. 2. Install cables as necessary. 3. Reinstall the cover. Align the holes on the TV back with the three tabs on the rear terminal cover as shown. 4. Close the cover. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y Cable clamper The cable clamper can be used to bundle the connection cables
(see page 10). WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE !
Never grasp the cable clamper when moving or lifting the TV. The cable clamper could break, causing the TV to fall. Cable clamper Adjusting the TV viewing angle You can adjust the angle of the TV screen. Swivel angle Tilt angle e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 9 Connecting your TV Note: All required cables, if not provided with your other devices, can be purchased at many electronics accessory suppliers. Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT 75 RF input on your TV. Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with standard audio and standard
(composite) video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection. Note: An S-video cable provides better picture performance than a composite video cable. Component video cables come in sets of three and are for use with video devices with component video output. These cables are typically color-coded red, green, and blue. (ColorStream is Toshibas brand of component video.) Separate audio cables are required for a complete connection. Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable. Coaxial (antenna) cable Standard A/V cables (red/white/yellow) S-video cable Component video cables Mini D-sub 15-pin cable Mini D-sub 15-pin cable is for use with a personal computer with an analog RGB (15-pin) output. Separate audio cable is required for a complete connection. Audio cable Connecting an antenna or cable TV This connection allows you to watch TV programs or basic cable channels. From Antenna or Cable Back of TV NOTE: RISK OF EQUIPMENT DAMAGE !
Never plug in any power cords until you have finished connecting all equipment. g n i t c e n n o C V T r u o y 10 Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. From Cable Box or Antenna IN from ANT OUT to TV CH 3 CH 4 Back of TV Stereo VCR VIDEO AUDIO L R IN OUT Note:
If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable. The TV side panel can be used to connect a VCR with S-video. Connecting a cable converter box This connection allows you to watch basic and premium cable channels. Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. Back of TV Note:
When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, and channel return function. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R From Cable IN OUT Cable box Connecting a cable converter box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Set the TV signal source to Video1 (page 20). Tune the VCR to channel 3 or 4 (the same channel as the converter box output switch), and use the cable converter box to change channels. Stereo VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT From Cable IN OUT Cable box Back of TV p u g n i t t e S V T r u o y Note:
When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, and channel return function. If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a VCR with S-video, use an S-video cable (in the S-video jacks) instead of a standard video cable. The TV side panel can be used to connect a VCR with S-video. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 11 Connecting a DVD player with ColorStream
(component video) and a VCR This connection allows you to watch DVD, VCR, and TV programs, and record TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DVD player with component video can greatly enhance picture quality and realism. To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch. To record a TV program while watching a DVD, tune the VCR to the channel to record, and select Video1 on the TV (see Selecting the video input source on page 20). From Antenna Stereo VCR IN from ANT OUT to TV CH 3 CH 4 Back of TV VIDEO AUDIO L R IN OUT TV side pannel g n i t c e n n o C V T r u o y Note:
For the highest possible picture quality, use component video cables between the TV and DVD player. The ColorStream jacks can be used with 480i, 480p, 720p, and 1080i scan system. The TV side panel can be used to connect a VCR with S-video. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Y PB PR S-VIDEO COMPONENT VIDEO VIDEO OUT AUDIO OUT L R L R DVD player with component video 12 Connecting a DTV receiver/set-top box with ColorStream (component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV (composite video only) and TV programs. Your TV has ColorStream (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism. To record and watch a DTV program, select LINE IN on the VCR, and select Video1 on the TV (see Selecting the video input source on page 20). To record a TV program while watching a DTV program, tune the VCR to the channel to record, and select Video1 on the TV. To record and watch the same TV program, tune the VCR to the channel to record, and select Video2 on the TV. To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch. From Antenna Stereo VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT Back of TV TV side pannel From DTV Antenna Satelite IN Y PB PR S-VIDEO COMPONENT VIDEO VIDEO OUT AUDIO OUT L R L R DTV Receiver with component video Note:
For the highest possible picture quality, use component video cables between the TV and DTV receiver/set-top box. The TV side panel can be used to connect a VCR with S-video. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 13 Connecting an audio system This connection allows you to hear the TV sound through external speakers connected to an audio amplifier. The audio signal level
(fixed) is not affected by pressing the volume buttons on the TV or the TVs remote control. To control the audio through the amplifier, use the remote control for your audio system. Note:
Set the TVs volume to the minimum level if necessary. Amplifier LINE IN L R Back of TV g n i t c e n n o C V T r u o y Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. Note:
If you have a camcorder with S-video, use an S-video cable instead of a standard video cable for better picture performance. VIDEO AUDIO OUT L R Camcorder Video 2 (side panel) 14 Connecting a personal computer (PC) This connection allows you to see the image of the personal computer on the TV screen. When connecting a personal computer to the TV, use an analog RGB (15pin) computer cable and an audio cable for PC. To use a personal computer, set the monitor output resolution on the personal computer before connecting to the TV. The following signals can be displayed. VGA:VESA 640 480 @ 60Hz (20DL75) XGA:VESA 1024 768 @ 60Hz (15DL15) Other formats may result in reduced picture quality. To display optimum picture, use the PC setting feature. (See Using the PC setting feature on page 29). Note:
Some PC models cannot be connected to this TV. There is no need to use an adapter for computers with DOS/V compatible mini D-
sub 15pin terminal. Depending on the specification of the PC you are playing the DVD-Video on, and the DVDs title, some scenes may be skipped, or you may not be able to pause during multi-angle scenes. Back of TV Computer Audio output RGB/PC output Audio cable Conversion adapter
(if necessary) E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 15 e h t g n i s U l o r t n o C e t o m e R Using the remote control Learning about the remote control POWER turns the TV on and off (Standby) MUTE mutes the sound (page 26) RECALL displays on-screen information (page 30) MTS switches Stereo or SAP sound (page 26) TV/VIDEO selects the video input source (page 20) Channel Numbers (0-9, 100) allow direct access to channels (page 20) CH RTN returns to the last viewed channels (page 20) ENTER sets programming menu information (page 17) yz x select or adjust programming menus (page 17) CH yz cycles through programmed channels (page 18) VOL - + adjusts the volume level CC selects the Caption or Text mode (page 25) MENU allows access to on-screen programming menus (page 17) EXIT exits the programming menus (page 17) SLEEP allows access to the automatic TV shut-off function (page 25) PICTURE selects the picture mode (page 23) SOUND selects the sound mode (page 28) FAV. CH cycles through favorite channels (page 19) Installing the remote control batteries To install the batteries:
1. Open the battery cover of the back of the remote control. 2. Install two batteries (R03 size AAA). Match the + and signs on the batteries to the signs on the battery compartment. 3. Close the battery on the remote control until the lock snaps. Remote control effective range MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH Caution:
Never throw batteries into a fire. Note:
Be sure to use AA size batteries. Dispose of batteries in a designated disposal area. Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. 16 Setting up your TV Learning about the menu system After you have installed the batteries, you will need to set some preferences on the TV by using the menu system. You can access the menu system using the buttons on your TV or the remote control. 1. Press MENU to display the menu system. 2. Press x or to select a menu. 3. Press ENTER, and then press y or z to select an item. 4. Press ENTER, and then press y or z to select or adjust a setting. 5. Press ENTER to activate the channel program settings. To return to the previous the menu, press EXIT. To erase the menu display, press MENU. Picture Picture Mode Contrast Brightness Color Sharpness Tint Sound ENTER MENU Audio Mode Bass Treble Balance Stable sound Channel ENTER MENU Auto prog. Manual prog. Favorite ch. Blue screen ENTER MENU Language Caption/Text Captions Panel lock V-Chip Auto off Special H-Position V-Position ENTER MENU Clock Phase Auto configure Reset PC ENTER MENU MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP ENTER yzx EXIT FAV. CH MENU Note:
The PC mode is selectable only when in the PC input mode (see Selecting the video input source on page 20). E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 17 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP ENTER yzx FAV. CH MENU Note:
To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. If you press the ENTER button in auto programming, the function will stop and only channels programmed up to that time will remain. MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP ENTER yzx CH yz FAV. CH MENU Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. To select a language:
1. Press MENU, and then press x or until the Special menu appears. 2. Press ENTER, and then press y or z to highlight Language. 3. Press ENTER, and then press y or z to select your desired language. Language Caption/Text Captions Panel lock V-Chip Auto off Special English Espaol Franais EXIT MENU Adding channels to the TVs memory When you press CH y or CH z, your TV will stop only on the channels you program into the TVs channel memory. Follow the steps below and on the next page to program all active channels into the TVs memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them into its memory. After the channels are programmed automatically, you can manually add or erase individual channels (see page 19). To program channels automatically:
1. Press MENU, and then press x or until the Channel menu appears. 2. Press ENTER, and then press y or z to highlight Auto prog. Auto prog. Manual prog. Favorite ch. Blue screen Channel To start ENTER EXIT MENU 3. Press ENTER to start auto programming. The TV will automatically cycle through all the TV and Cable channels, and store all active channels in the channel memory. Auto prog. Manual prog. Favorite ch. Blue screen Channel 2 % TV 4 STOP 4. Press CH y or CH z to view the programmed channels. 18 p u g n i t t e S V T r u o y Adding and erasing channels manually After you have automatically programmed the active channels into the TVs channel memory, you can manually add or erase specific channels. To add or erase channels:
1. Press MENU, and then press x or until the Channel menu appears. 2. Press ENTER, and then press y or z to highlight Manual prog. 3. Press ENTER, and then press x or to select a channel you want to add or erase. TV top panel TV/VIDEO VOLUME CHANNEL POWER Channel zy MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH Channel Number ENTER yzx CHyz MENU FAV. CH Auto prog. Manual prog. Favorite ch. Blue screen Channel TV 4 Erase MENU EXIT 4. Press z, and then press x or to select Memory (add) or Erase. The current channel is added to Memory or erased from the channel list. Changing channels To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (09 and 100). For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2, 5. To change to the next programmed channel:
Press CH y or CH z on the TV or remote control. Programming your favorite channels You can preset up to 8 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch. To program your favorite channels:
1. Press MENU, and then press x or until the Channel menu appears. 2. Press ENTER, and then press y or z to highlight Favorite ch. 3. Press ENTER to display the Favorite ch. menu. Auto prog. Manual prog. Favorite ch. Blue screen Channel To set ENTER EXIT MENU Favorite Ch. TV 4 MENU EXIT 4. Press y or z to select the first favorite channel position. 5. Press x or to set the desired channel number for first favorite channel. 6. Repeat steps 4 to 5 to program other channels. To select your favorite channels:
Press FAV. CH repeatedly. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 19 Using the TVs features Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. To switch between two channels:
1. Select the first channel (or video mode) you want to view. 2. Select a second channel using the Channel Number buttons
(09, 100). 3. Press CH RTN. The previous channel will be displayed. Each time you press CH RTN, the TV will switch back and forth between the last two channels that were selected. Using the Blue screen feature With the Blue screen function On, the screen will automatically turn blue and the sound will be muted when no signal is received. To turn on the Blue screen:
1. Press MENU, and then press x or until the Channel menu appears. 2. Press ENTER, and then press y or z to highlight Blue screen. 3. Press ENTER, and then press y or z to select On. Auto prog. Manual prog. Favorite ch. Blue screen Channel On Off EXIT MENU Selecting the video input source Press TV/VIDEO to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select Video1
(including ColorStream), Video2, or PC depending on which input jacks are used for connecting the devices (see Connecting your TV on page 10). s V T e h t g n i s U s e r u t a e F MUTE POWER TV/VIDEO MTS RECALL TV/VIDEO 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP Channel Number CH RTN ENTER yzx FAV. CH MENU Note:
If the Blue screen comes on and off due to poor signal strength, select Off in step 3. TV top panel TV/VIDEO VOLUME CHANNEL POWER Video1 Video2 PC TV/VIDEO TV channel 20 Using the V-Chip menu Some TV programs and movies include signals that classify the content of the program (violence, sex, dialog, language). The V-Chip control feature in this TV detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup. 1. Ratings and categories to be blocked. 2. Set a password. 3. Enable the lock. V-Chip rating and categories Rating guidelines are provided by broadcast stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. For Movies previously shown in theaters :
Movie Ratings :
Unblocked G and Above PG and Above PG-13 and Above R and above NC-17 and Above X If you set PG-13 and Above : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
(general audience)
(parental guidance suggested)
(13 years and older)
(restricted)
(18 years and older)
(adult) For Television programs including made-for-TV movies:
General TV Ratings:
Unblocked TV-G and Above TV-PG and Above TV-14 and Above TV-MA Children TV Ratings:
Unblocked TV-Y and Above
(general audience)
(individual categories do not apply)
(parental guidance suggested)
(14 years and older)
(mature audience)
(youth)
(individual content categories do not apply)
(youth, 7 years and up) TV-Y7 Content Categories:
Dialog - sexual dialogue Language - adult language Sex scenes - sexual situations Violence
(applies to TV-PG and Above, TV-14)
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
(applies to TV-PG and Above, TV-14 and Above, TV-MA) F Violence - fantasy violence (applies only to TV-Y7) No Rating
(blocks all viewing) Note:
The V-Chip function is available for the U.S. V-Chip system only. The Canadian V-Chip system is not supported. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 21 MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP Number ENTER yzx FAV. CH MENU If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. Rating : TV-PG TV 4 L V Parental lockout is active V-Chip (Parental menu) setup 1. Press MENU, and then press x or until the Special menu appears. 2. Press ENTER, and then press y or z to highlight V-Chip. Press ENTER. Special Special Language Caption/Text Captions Panel lock V-Chip Auto off To set Language Caption/Text Captions Panel lock V-Chip Auto off Enter code _ ENTER EXIT MENU 0 ~ 9 Enter Password If Lock is already set, enter the password requested. The TV is set with the initial password 0-0-0-0. If you cannot remember your password, press "7-7-7-7."
3. Setting Lock on/off:
Press y or z to highlight Lock. Press ENTER, and then press y or z to select On (Lock) or Off
(Unlock). Lock Set password MPAA Age block Content block Aux block Parental On Off EXIT MENU 4. Set password:
Press y or z to highlight Set password. Press ENTER, and then enter a four digit password. Enter it again when requested. Lock Parental Set password Ent. code MPAA Age block Content block Aux block Rep. code _ _ _ _ 0 ~ 9 Ebter Password 5. Press y or z to highlight type of blocking to be set. 6. Press ENTER, and then press y or z to select type of ratings to block. Age block and Content block menus, also have sub menus. So, repeat steps 5 and 6 in the sub menu, to set the types of blocking and ratings. Parental Parental Lock Set password MPAA Age block Content block Aux block Lock Set password MPAA Age block To set ENTER EXIT MENU Parental Content block To set Aux block Unblocked TVG & above TVPG & above TV14 & above TVMA ENTER EXIT MENU Parental Unblocked TVPG & above TV14 General Children Dialog Language Sex Violence F.Violence ENTER EXIT MENU ENTER EXIT MENU s V T e h t g n i s U s e r u t a e F 22 Note:
If you select one of the factory-set picture modes (Dynamic, Standard, or Movie) and then adjust a picture quality setting (for example, increase the contrast), the picture mode automatically changes to Memory in the Picture menu. MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH ENTER yzx MENU PICTURE Adjusting the picture Selecting the picture mode You can select your desired picture type from four picture modes:
Dynamic, Standard, Movie, or Memory. Mode Dynamic Standard Movie Memory Picture Quality Bright and dynamic picture (factory setting) Standard picture setting (factory setting) Movie-like picture setting (factory setting) Your personal preference To select the picture mode:
Press PICTURE repeatedly to select the mode you prefer. Dynamic Standard Memory Movie You can also select the picture mode by using the Picture menu:
1. Press MENU, and then press x or until the Picture menu appears. 2. Press ENTER, and then press z or y to highlight Picture Mode. 3. Press ENTER, and then press z or y to select the mode you prefer. Picture Picture Mode Contrast Brightness Color Sharpness Tint Dynamic Standard Movie Memory EXIT MENU Adjusting the picture quality You can adjust the picture quality to your personal preferences, including the contrast, brightness, color, sharpness, and tint. Selection contrast brightness color sharpness tint x lower darker paler softer reddish Pressing higher lighter deeper sharper greenish To adjust the picture quality:
1. Press MENU, and then press x or until the Picture menu appears. 2. Press ENTER, and then press y or z until the item you want to adjust is highlighted. Picture Picture Mode Contrast Brightness Color Sharpness Tint 3. Press ENTER. 4. Press x or to adjust the level. Contrast 85 Note:
If you continue to adjust the other item, press y or z in step 4. Contrast 85 ENTER EXIT MENU The Picture qualities you adjusted will be saved in the Memory mode. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 23 Using the closed caption feature The closed caption feature has two options:
CaptionsAn on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as CC in TV listings). TextAn on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations). To select captions or text:
1. Tune the TV to the desired program. 2. Press MENU, and then press x or to display Special menu. 3. Press ENTER, and then press y or z to highlight Caption/Text. Language Caption/Text Captions Panel lock V-Chip Auto off Special CC1 Text1 CC2 Text2 CC3 Text3 CC4 Text4 ENTER EXIT MENU 4. Press ENTER, and then press y or z to select desired Caption or Text mode. MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP ENTER yzx FAV. CH MENU Language Caption/Text Captions Panel lock V-Chip Auto off Special CC1 Text1 CC2 Text2 CC3 Text3 CC4 Text4 EXIT MENU To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays translation of the primary language in your area). Note: If the program or video you selected is not closed captioned, no captions will display on the screen. Note:
A closed caption signal may not display in the following situations:
When a videotape has been dubbed When the signal reception is weak When the signal reception is nonstandard s V T e h t g n i s U s e r u t a e F Giant pandas eat leaves. To view text, select Text1, Text2, Text3, or Text4. Note: If text is not available in your area, a black rectangle may appear on your screen. If this happens, turn the Closed Caption feature Off. WORLD WEATHER Temps Current F C Weather LONDON 51 11 MOSCOW 57 14 PARIS 53 12 ROME 66 19 TOKYO 65 18 Clear Cloudy Clear Cloudy Rain 24 To turn on or off the Closed Caption feature 1. Press MENU, and then press x or to display the Special menu. 2. Press ENTER, and then press y or z to highlight Captions. 3. Press ENTER, and then press y or z to select On, Advanced Mute or Off. Advanced Mute shows the selected Caption or Text when the TV sound is muted. Language Caption/Text Captions Panel lock V-Chip Auto off Special On Advanced Mute Off EXIT MENU The CC button on the remote control can also be used to select On, Advanced Mute or Off mode. Using the Panel lock feature You can lock the control buttons on the TV to prevent your settings from being changed accidentally (by children, for example). When the Panel lock is On, no control buttons on the TV top panel will operate. To lock the top panel:
1. Press MENU, and then press x or to display the Special menu. 2. Press ENTER, and then press y or z to highlight Panel lock. 3. Press ENTER, and then press y or z to select On. Language Caption/Text Captions Panel lock V-Chip Auto off Special On Off EXIT MENU To unlock the top panel:
Select Off in step 3 above. Setting the sleep timer To set the sleep timer to turn off the TV automatically:
Press SLEEP to set the length of time until the TV turns off. 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH ENTER yzx CC MENU TV top panel TV/VIDEO VOLUME CHANNEL POWER Control buttons MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH ENTER yzx SLEEP MENU Sleep 30 Every time you press the button, the time display will increase by 30 minutes, up to 120 minutes. 30 60 90 120 To cancel the sleep timer:
Press SLEEP until Sleep appears. Note :
When an instant power failure occurs, the sleep timer settings may be cleared. To display the amount of time left until the TV turns off automatically, press SLEEP. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 25 Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display Mute in the lower left corner. When you select MUTE mode, the closed caption feature is automatically activated. To deactivate this feature, deactivate MUTE. This feature works only when the closed caption mode is set to Advanced Mute. See Using the closed caption feature on page 24 for more information. Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while watching TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the word ST.SAP, STEREO or SAP appears on-screen every time the TV is turned on, the channel is changed, or the RECALL button is pressed. The MTS feature is not available when the TV is in Video mode. To listen to stereo sound:
Press MTS repeatedly to select Stereo. MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH MUTE RECALL MTS Stereo You can leave your TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural). If the stereo sound is noisy, select Mono to reduce the noise. To listen to SAP (if available):
Press MTS repeatedly to select SAP. SAP You will hear the stations second audio program (if available) from the speakers, while viewing the original programs picture. s V T e h t g n i s U s e r u t a e F 26 Using the WOW surround sound feature WOW surround widens and deepens audio listening field to deliver exceptional sound from the TV's speakers. The feature uses stereo signals from a TV broadcast or video input. To activate the WOW feature:
1. Select Stereo mode (see Selecting stereo/SAP broadcasts on page 26). 2. Press MENU, and then press x or until the Sound menu appears. 3. Press ENTER, and then press y or z to highlight Audio Mode. 4. Press ENTER, and then press y or z to select WOW. Sound Audio Mode Bass Treble Balance Stable sound WOW Flat Hall Theater News Memory EXIT MENU Selecting the audio mode You can select your desired sound type from six audio modes:
WOW, Flat, Hall, Theater, News, or Memory. Press SOUND repeatedly to select the appropriate sound mode as shown:
WOW Flat Hall Memory News Theater Mode WOW Flat Hall Theater News Memory Sound Quality see above flat sound ( factory setting ) a concert hall filled with a rich warm sound
( factory setting ) a movie theater filled with a dynamic sound
( factory setting ) news/dialogue ( factory setting ) your personal preference Note:
If the broadcast is monaural, the WOW sound effect will not work. MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP FAV. CH ENTER yzx MENU SOUND Note:
If you select one of the factory-set audio modes ( WOW, Flat, Hall, Theater, or News ), and then change a sound quality setting ( for example, increase the bass ), the audio mode automatically change to Memory mode. WOW, SRS, and the symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 27 Note:
If you continue to adjust the other item, press y or z in step 4. MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP ENTER yzx FAV. CH MENU Adjusting the sound quality You can change the quality of your TVs sound by adjusting the bass, treble, and balance. To adjust the sound quality:
1. Press MENU, and then press x or until the Sound menu appears. 2. Press ENTER, and then press y or z to highlight the item you want to adjust. Sound Audio Mode Bass Treble Balance Stable sound Treble 50 ENTER EXIT MENU 3. Press ENTER. 4. Press x or to adjust the level. Treble 50 x makes the sound quality weaker or increases the balance in the left channel, depending on the item selected. makes the sound quality stronger or increases the balance in the right channel, depending on the item selected. Using the StableSound feature When the signal source is changed, the StableSound feature limits the highest volume level to prevent extreme changes in volume (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound feature:
1. Press MENU, and then press x or until the Sound menu appears. 2. Press ENTER, and then press y or z to highlight Stable sound. 3. Press ENTER, and then press y or z to Select On. Sound Audio Mode Bass Treble Balance Stable sound On Off EXIT MENU To turn off the StableSound feature:
Select Off in step 3 above. s V T e h t g n i s U s e r u t a e F 28 TV top panel TV/VIDEO VOLUME CHANNEL POWER TV/VIDEO MUTE POWER TV/VIDEO MTS RECALL TV/VIDEO 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP ENTER yzx FAV. CH MENU Using the PC setting feature You can adjust the horizontal/vertical picture position, clock (to minimize vertical stripes on the screen), and phase (to remove horizontal noise and sharpen the picture). You can auto-configure and reset these settings. 1. Confirm a PC is connected (see Connecting a personal computer (PC) on page 15). 2. Press TV/VIDEO repeatedly to select PC input mode. (See Selecting the video input source on page 20.) 3. Press MENU, and then press x or until the PC menu appears. 4. Press ENTER, and then press y or z to select an item. H-Position V-Position Clock Phase Auto configure Reset PC H-Position 76 ENTER EXIT MENU 5. Press Enter. 6. Press x or to make appropriate adjustments. H-position/V-position Adjusts picture left/right and up/down. The adjustment ranges of H-Position is 0100. (Based on the input mode, the adjustable range may change.) Clock Minimizes any vertical bars or stripes appearing on the screen background. The adjustment ranges is 0100. (Based on the input mode, the adjustable range may change.) Phase Reduces (or minimizes) any horizontal noise and clears up or sharpens the character images. The range adjustment is 0100.
(Based on the input mode, the adjustable range may change.) Auto configure Automatically adjusts the screen position, clock, and phase.
(The displayed image will disappear for a few seconds while auto-configuration is in progress.) Reset Returns to the default settings programmed at the factory. The values in the Reset function cannot be modified. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 29 Using the Auto off feature With the Auto off feature On, the TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature does not work in the blue screen off mode. To activate the Auto off:
1. Press MENU, and then press x or until the Special menu appears. 2. Press ENTER, and then press y or z to highlight Auto off. 3. Press ENTER, and then press y or z to Select On. Language Caption/Text Captions Panel lock V-Chip Auto off Special On Off EXIT MENU To deactivate the Auto off:
Select Off in step 3 above. Displaying on-screen information Press RECALL to display the following information on-screen:
Channel number or Video mode selected Stereo or SAP audio status TV 6 ST.SAP MUTE POWER TV/VIDEO MTS RECALL 11 4 7 0 3 6 9 CH RTN C 2 5 8 100/
CH VOL ENTER VOL CH EXIT MENU CC SOUND PICTURE SLEEP RECALL ENTER yzx FAV. CH MENU Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature turns on the TV automatically when the power is resupplied. If the power is going to be off for a long time and you are going to be away from your TV, unplug the power cord to prevent the TV from turning on in your absence. s V T e h t g n i s U s e r u t a e F 30 Appendix Specifications This model complies with the specifications listed below. Designs and specifications are subject to change without notice. This model may not be compatible with features and/or specifications that may be added in the future. WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center. Dimensions (Including TV stand) 15DL15: Width : XX-X/X inches (XXX mm) Height : XX-XX/XX inches (XXX mm) Depth : XX-XX/XX inches (XXX mm) 20DL75: Width : XX-X/X inches (XXX mm) Height : XX-XX/XX inches (XXX mm) Depth : XX-XX/XX inches (XXX mm) Mass (weight) 15DL15: XX.X lbs (XX.X kg) 20DL75: XX.X lbs (XX.X kg) Operating condition Temperature: 32F 95F (0C 35C) Humidity: 20 80% (no moisture condensation) Television System NTSC standard Channel Coverage VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125) Power Source 120 V AC, 60 Hz Power Consumption XXX W (average) 1.0 W below in standby mode Audio Power 5 W + 5 W Speaker Type Two X-X/X X-X/X inches (XX XXX mm) Video/Audio Terminals S-VIDEO INPUT Y : 1 V(p-p), 75 ohms, negative sync. C : 0.286 V(p-p) (burst signal), 75 ohms VIDEO/AUDIO INPUT VIDEO: 1 V(p-p), 75 ohms, negative sync. AUDIO: 150 mV(rms) (30% modulation equivalent, 22k ohms or greater) ColorStream (Component video) INPUT Y : 1V(p-p), 75 ohms PR: 0.7 V(p-p), 75 ohms PB: 0.7 V(p-p), 75 ohms AUDIO: 150 mV(rms), 22k ohms or greater Suggested resolutions: 480i, 480p, 720p, 1080i
(These signal formats are converted to match the particular scanning system of the TV.) AUDIO OUTPUT 150 mV(rms) (30% modulation equivalent, 2.2k ohms or less) HEADPHONE jack 3.5 mm stereo PC INPUT 15-pin D-sub Analog RGB PC AUDIO INPUT 3.5 mm stereo mini jack E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 31 Troubleshooting Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. Symptom TV will not turn on Solution Make sure the power cord is plugged in, then press POWER. The remote control batteries may be dead. Replace the batteries. No picture, no sound Check the antenna/cable connections. No sound, picture OK Poor picture, sound OK The sound may be muted. Press VOLUME. The station may have broadcast difficulties. Try another channel. Make sure the MTS feature is set properly. Check the antenna connections. The station may have broadcast difficulties. Try another channel. Adjust the Picture menu. Poor reception of broadcast channels The station may have broadcast difficulties. Try another channel. Check the antenna connections. Black box appears on the screen The closed caption feature may be set to one of the Text modes
(Text1, Text2, Text3, or Text4). Turn closed captioning Off. Unable to select a certain channel The channel may be erased with the Manual programming feature. Multiple images The station may have broadcast difficulties. Try another channel. Antenna reception may be poor. Use a highly directional outdoor antenna. Poor color or no color The station may have broadcast difficulties. Try another channel. Adjust the Tint and/or Color in the Picture menu. No stereo or SAP sound from a known MTS broadcast Make sure the MTS feature is set properly. The top panel buttons do not operate Check the Panel lock feature. The remote control does not operate Remove all obstructions between the remote control and the remote control sensor in the TV. The remote control batteries may be dead. Replace the batteries. x i d n e p p A 32 Limited United States Warranty for LCD Televisions, 20" and smaller Toshiba America Consumer Products, L.L.C. (TACP) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES. Limited One (1) Year Warranty on Parts and Labor TACP warrants this LCD Television and its parts against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACPS OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. Rental Units The warranty for LCD Television rental units begins on the date of the first rental or thirty (30) days after the date of shipment to the rental firm, whichever comes first. Limited Warranty for Commercial Units TACP warrants LCD Televisions that are sold and used for commercial purposes as follows: all parts are warranted against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACPS OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. Owners Manual and Product Registration Card Read this owners manual thoroughly before operating this LCD Television. Complete and mail the enclosed product registration card or register your LCD Television online at www.tacp.toshiba.com/service as soon as possible. By registering your LCD Television you will enable TACP to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required under the U.S. Consumer Product Safety Act. Failure to complete and return the product registration card does not diminish your warranty rights. Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide other proof of purchase.
(2) All warranty servicing of this LCD Television must be made by the Depot Warranty Repair Center specified by the TACP Consumer Solutions Center.
(3) The warranties from TACP are effective only if this LCD Television is purchased and operated in the Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems, misaligned satellite dishes, cable television distribution, VCRs, DVD players/recorders, personal computer level IEEE-
1394 devices, and any other connected signal source device are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any LCD Television or parts that have been lost or discarded by you or to damage to the LCD Television or parts caused by fires, misuse, accident, Acts of God (such as lightning or fluctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished by TACP; use or malfunction through simultaneous use of this LCD Television and connected equipment; or to units that have been modified or had the serial number removed, altered, defaced, or rendered illegible. How to Obtain Warranty Service If, after following all of the operating instructions in this manual and reviewing the section entitled Troubleshooting, you find that service is needed:
(1) For instructions on how to obtain warranty service for your LCD Television, contact TACPs Consumer Solution Center toll free at 1-800-631-3811.
(2) You must include the original bill of sale (or a copy thereof) or other proof of purchase along with the entire LCD Television to the Depot Warranty Repair Center specified by the TACP Consumer Solutions Center. You are responsible for all inbound transportation and insurance charges for the LCD Television to the Depot Warranty Repair Center specified by the TACP Consumer Solutions Center. For additional information, visit TACPs website:
www.tacp.toshiba.com ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD TELEVISION). No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP arising under the warranty or under any statute or law of the United States or any state thereof is hereby limited to ninety (90) days from the date you discover, or should have discovered, the defect. This limitation does not apply to implied warranties arising under the law of any state of the U.S.A. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 33 Limited Canada Warranty for LCD Televisions, 32 and smaller Toshiba Canada Limited, (TCL) makes the following limited warranties to original consumers in Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TELEVISIONS PURCHASED IN CANADA AND USED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION, THE U.S.A. AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION, THE U.S.A. AND MEXICO, AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES. Limited One (1) Year Warranty on Parts and Labour TCL warrants this LCD Television and its parts against defects in materials or workmanship for a period of one (1) year after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCLS OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE DEPOT. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE DEPOT. Rental Units The warranty for LCD Television rental units begins on the date of the first rental or thirty (30) days after the date of shipment to the rental firm, whichever comes first. Limited Warranty for Commercial Units TCL warrants LCD Televisions that are sold and used for commercial purposes as follows: all parts are warranted against defects in materials or workmanship for a period of ninety (90) days after the date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCLS OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU. YOU MUST DELIVER THE ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE DEPOT. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE CHARGES FOR THE TELEVISION TO AND FROM THE SERVICE DEPOT. Owners Manual and Product Registration Read this owners manual thoroughly before operating this LCD Television. Register your LCD Television online at www.toshiba.ca as soon as possible. By registering your LCD Television you will enable TCL to bring you new products specifically designed to meet your needs and help us to contact you in the unlikely event a safety notification is required. Failure to register your LCD Television does not diminish your warranty rights. Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide other proof of purchase.
(2) All warranty servicing of this LCD TV must be made by an Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if this LCD Television is purchased in Canada from an authorized TCL dealer and operated in Canada.
(4) Labour service charges for set installation, setup, adjustment of customer controls, and installation or repair of antenna 34 systems are not covered by this warranty. Reception problems caused by inadequate antenna systems, misaligned satellite dishes, cable television distribution, VCRs, DVD players/recorders, personal computer level IEEE-
1394 devices, and any other connected signal source device are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any LCD Television or parts that have been lost or discarded by you or to damage to the LCD Television or parts caused by fires, misuse, accident, Acts of God (such as lightning or fluctuations in electric power), improper installation, improper maintenance, or use in violation of instructions furnished by TCL; use or malfunction through simultaneous use of this LCD Television and connected equipment; or to units that have been modified or had the serial number removed, altered, defaced, or rendered illegible. How to Obtain Warranty Service If, after following all of the operating instructions in this manual and reviewing the section entitled Troubleshooting, you find that service is needed:
(1) To find the nearest TCL Authorized Service Depot, visit TCLs web site at www.toshiba.ca.
(2) You must include the original bill of sale (or a copy thereof) or other proof of purchase along with the entire LCD Television to the Authorized Service Depot. You are responsible for all inbound transportation and insurance charges for the LCD Television to the Authorized Service Depot. For additional information, visit TCLs website:
www.toshiba.ca ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE, OR INABILITY TO USE THIS LCD TELEVISION). No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these warranties in any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TCL arising under the warranty or under any law of Canada or any province thereof is hereby limited to ninety (90) days from the date you discover, or should have discovered, the defect. This limitation does not apply to implied warranties arising under the law of any province of Canada. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. [0305]
x i d n e p p A S S-video cables ......................................................................10 SAP sound ..............................................................................26 Set-top box ............................................................................13 Sleep timer .............................................................................25 Sound quality adjustments ..............................................28 Specifications ........................................................................31 StableSound ............................................................................................................................ 28 Stereo sound .........................................................................26 T Troubleshooting ...................................................................32 TV/VIDEO button .................................................................20 V V-Chip Age block ...........................................................................22 Aux block ...........................................................................22 Content block ...................................................................22 MPAA ..................................................................................22 Password ............................................................................22 VCR connection ........................................................... 1113 W Warranty .......................................................................... 33, 34 WOW surround ................................................................. 27 Index A B Antenna cables ....................................................................10 Audio mode selection ........................................................31 Audio system connection .................................................14 Auto off....................................................................................30 A/V cables ..............................................................................10 Back of the TV ........................................................................ 8 C Cable converter box connection ...................................14 Camcorder connection ......................................................14 CH yz buttons ....................................................................18 CH RTN button .....................................................................20 Channel Number buttons ................................................20 Channel programming Automatic programming .............................................18 Memory/ERASE ..............................................................19 Closed caption ......................................................................25 Component video cables..................................................10 D E DTV receiver connection ..................................................13 DVD connection...................................................................12 F G H I K FAV. CH button .....................................................................19 Favorite channels ................................................................19 Front of the TV ........................................................................ 8 L M Language selection ............................................................18 Last mode memory .............................................................30 Menu system ......................................................................... 17 MTS ...........................................................................................26 MUTE button .........................................................................26 O P Q Panel lock ...............................................................................25 PC connection ......................................................................15 PC setting ...............................................................................29 Picture adjustments Picture mode ....................................................................23 Picture quality ..................................................................23 R RECALL button ....................................................................30 Remote control Battery installation .........................................................16 Learning about the buttons ........................................16 E F S n o i t c u d o r t n I g n i t c e n n o C V T r u o y e h t g n i s U l o r t n o C e t o m e R p u g n i t t e S V T r u o y s V T e h t g n i s U s e r u t a e F x i d n e p p A x e d n I 35 HEAD OFFICE:82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470, U.S.A. NATIONAL SERVICE DIVISION:1420B TOSHIBA DRIVE, LEBANON, TN. 37087, U.S.A. HEAD OFFICE/191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400 SERVICE CENTERS:
TORONTO: 191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400 MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J-4A1, CANADA TEL:(514)390-7766 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500 ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products, L.L.C.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-04-13 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-04-13
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
T20DL75A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** H********
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 20" LCD TV / MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Gumi University EMC Center
|
||||
1 | Name |
T****** P****
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@kumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC