all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.78 MiB | ||||
1 | Attestation Statements | |||||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 1.78 MiB |
PLASMA TV OWNERS MANUAL MODEL: DU-42PX12XD Please read this manual carefully and completely before operating your TV. Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below. See the label attached on the back cover and relate this information to your dealer if you require service. Model Number :
Serial Number :
LG Electronics U.S.A., Inc. Warning WWarning arning
/CAUTION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. POWER CORD POLARIZATION:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code
(U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. REGULATORY INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip-
ment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION:
Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized mod-
ification could void the users authority to operate this product. COMPLIANCE:
The responsible party for this products compliance is:
LG Electronics U.S.A., Inc 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 1-800-243-0000 http://www.lgusa.com 2 Plasma TV Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple precautions discussed in this manual can help you get many years of enjoyment and safe operation that are built into your new product. This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards Association. 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 9. Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. 2. Follow Instructions All operating and use instructions should be followed. 3. Retain Instructions The safety and operating instructions should be retained for future reference. 4. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 5. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Water and Moisture Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet base-
ment, or near a swimming pool. 7. Accessories, Carts, and Stands Do not place this product on a slippery or tilted surface, or on an unstable cart, stand, tripod, bracket, or table. The product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manu-
facturer, or sold with the product. Any mounting of the prod-
uct should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufac-
turer. 8. Transporting Product A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by plac-
ing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturers instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12. Power-Cord Polarization This product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into the grounding-type power outlet. This is a safety fea-
ture. If you are unable to insert the plug into the outlet, con-
tact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 13. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. PORTABLE CART WARNING Owners Manual 3 Safety Instructions Safety Instructions continued Safety Instructions continued 19. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service per-
sonnel. 20. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. b. If the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance. c. d. e. f. 21. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the man-
ufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 22. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to deter-
mine that the product is in proper operating condition. 23. Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. The product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. 24. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat. 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (U.S.A.), ANSI/ NFPA 70 provides information with regard to proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes, and requirements for the grounding electrode. Example of Grounding According to National Electrical Code Instructions Ground Clamp Antenna Lead in Wire Electric Service Equipment NEC - National Electrical Code Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductor
(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) 15. Lightning For added protection for this product (receiver) during a light-
ning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 16. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 4 Plasma TV Contents Contents Warnings . 2 Safety Instructions . 3~4 Introduction Controls . 7 Connection Options . 8 Remote Control Key Functions . 9 Installation Installation Instruction . 10~11 External Equipment Connections . 12~16 Antenna Connection . 12 VCR Setup / Cable TV Setup . 13 External A/V Source Setup . 14 Monitor Out Setup / DVD Setup . 14 HDSTB Setup / Digital Audio Output . 15 PC Setup . 16 Operation Screen Setup for PC mode . 17 Turning the TV On . 18 On-screen Menus Language Selection . 18 Setup Menu Options EZ Scan (Channel Search) . 19 Channel Edit . 19 DTV Signal Strength . 20 Channel Label Setup . 20 Main Picture Source Selection . 20 Video Menu Options EZ Picture . 21 Manual Picture Control (Off Option) . 21 Color Temperature Control . 21 Video Preset . 21 Audio Menu Options Audio Language . 22 EZ SoundRite / EZ Sound . 22 Manual Sound Control (Off Option) . 23 Stereo/SAP Broadcasts Setup . 23 Front Surround . 23 TV Speakers On/Off Setup . 24 BBE . 24 Time Menu Options Contents Auto Clock Setup . 25 Manual Clock Setup . 25 On/Off Timer Setup . 25 Sleep Timer / Auto Off . 26 Option Menu Features Aspect Ratio . 27 Caption / Caption Mode . 28 Caption Option
. 29 Cinema Mode Setup . 29 Demo . 29 ISM Method . 30 Low power . 30 Split Zoom . 30 Lock Menu Options Parental Lock Setup . 32 PIP (Picture-in-Picture)/POP/Twin Picture Watching PIP/POP/Twin Picture . .33 Selecting an Input Signal Source for PIP/Twin Picture . 33 Swapping the PIP/Twin Picture . 33 TV Program Selection for PIP . 33 Moving the PIP sub picture . 34 Adjusting Main and Sub Picture Sizes for Twin Picture . 34 POP (Picture-out-of-Picture: Channel Scan) . 34 External Control Device Setup . 35~39 IR Codes . 40~41 Programming the Remote . 42 Programming Codes . 43~44 Troubleshooting Checklist . 45 Maintenance . 46 Product Specifications . 46 Warranty . 47~48 Setup and Operation Checklist Setup and Operation Checklist Setup and Operation Checklist
(See pages 11~16 for available connection and operational setup options.) 1. Unpack TV and all accessories. 5. Turn video source equipment on. 2. Connect all external video and audio equipment. 6. Select viewing source for TV. see pages 14 ~ 16. See page 20. 3 Install batteries in remote control. 7. Fine-tune source image and sound to your personal prefer-
See page 9. 4. Turn TV on. See page 18. ence or as required by source. See pages 21 ~ 24. 8. Additional features set up See Contents above. After reading this manual, keep it handy for future reference. Owners Manual 5 Introduction Introduction Introduction What is a Plasma Display Panel (PDP)?
A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps. How does it work?
PDP is an array of cells, known as pixels, which are comprised of 3 sub pixels, corresponding to the colors red, green, and blue. Gas in a plasma state is used to react with phosphors in each sub-pixel to produce colored light (red, green, or blue). These phos-
phors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors. You get the rich, dynamic colors that you expect. Each sub-pixel is individually controlled by advanced electronics to produce over 16 million different colors. All of this means that you get perfect images that are easily viewable in a display that is less than 5 inches thick. 160 - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is clear and visible to viewers anywhere in the room who can see the screen. Wide Screen The screen of the Plasma Display is so wide that your viewing experience is as if you are in a theater. Multimedia Connect your plasma display to a PC and you can use it for conferencing, games, and Internet browsing. The Picture-in-Picture feature allows you to view your PC and video images simultaneously. Versatile The light weight and thin size makes it easy to install your plasma display in a variety of locations where conventional TVs will not fit. The PDP Manufacturing Process: a few minute colored dots may be present on the PDP screen The PDP (Plasma Display Panel), which is the display device of this product is composed of 0.9 to 2.2 million cells. A few cell defects will normally occur in the PDP manufacturing process. Several tiny, minute colored dots visible on the screen should be acceptable. This also occurs in other PDP manufacturers' products. The tiny dots appearing does not mean that this PDP is defec-
tive. Thus a few cell defects are not sufficient cause for the PDP to be exchanged or returned. Our production technology mini-
mizes these cell defects during the manufacture and operation of this product. 6 Plasma TV Introduction Controls Controls
- This is a simplified representation of front panel. Image shown may be somewhat different from your TV. Front Panel Controls Front Panel Controls ON/OFF TV/VIDEO MENU VOL CH ON/OFF Button MENU Button CHANNEL (E, D) Buttons Remote Control Sensor TV/VIDEO Button VOLUME (FF,G) Buttons Power Standby Indicator Illuminates red in standby mode, Illuminates green when the TV is turned on. Owners Manual 7 Introduction Connection Options Connection Options Back Connection Panel Back Connection Panel A/V 2 S-VIDEO Input A connection available to provide better picture quality than the video input. VIDEO Input Connects the video signal from a video device. AUDIO Input Use to connect to hear stereo sound from an external device. O E D V S
I O E D V I O N O M
L I O D U A R DVI Input/Audio Input/RGB Input Connect the monitor output con-
nector from a PC to the appro-
priate input port. Remote Control Port Connect your wired remote control here. S-Video Input Connect S-Video out from an S-VIDEO device to the S-
VIDEO input. DVD/DTV Input (Component 1-2) Connect a component video/audio device to these jacks. Monitor Output Connect a second TV or Monitor. DIGITAL AUDIO
(OPTICAL) COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1 RS-232C INPUT
(CONTROL/SERVICE) REMOTE CONTROL DVI INPUT COMPONENT1 INPUT OUTPUT DVI INPUT
(PC/DTV INPUT) AUDIO INPUT RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT VIDEO INPUT
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT Digital Audio (DVI: Digital Visual Interface/Component1) Input/
Digital Audio Output Connect digital audio from various types of equipment. Note: In standby mode, these ports will not work. Audio/Video Input 1 Connect audio/video out-
put from an external device to these jacks. Antenna 1-2 Inputs Connect cable or antenna signals to the TV, either directly or through your cable box. For DTV use Antenna 2 only. RS-232C INPUT
(CONTROL/SERVICE) PORT Connect to the RS-232C port on a PC. Power Cord Socket This TV operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to oper-
ate the TV on DC power. 8 Plasma TV Remote Control Key Functions Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the TV. L I G H T MODE POWER T V / V I D E O COMP/RGB/DVI TIMER FLASHBK MUTE SURF VOL CH SAP RATIO INFO CC OK MENU EXIT SOUND VIDEO PLAY PAUSE STOP RECORD REW FF SKIP PIP PIPCH-
PIPCH+
PIPINPUT FREEZE ZOOM SIGNAL SWAP ADJUST LIGHT Illuminates the remote control buttons. TV/VIDEO Selects: DTV, Analog, Video1-2, Component 1-2, RGB-DTV (or RGB-PC), DVI-DTV (or DVI-PC) input sources. COMP/RGB/DVI Selects: Component 1-2, RGB-DTV (or RGB-
PC), DVI-DTV (or DVI-PC) input sources. NUMBER buttons DASH Used to enter a program number for multiple program channels such as 2-1,2-2,etc. MUTE Switches the sound on or off. VOLUME UP/DOWN Increases/decreases the sound level. INFO When you watch the TV, displays information on top of the screen. Not available in Component 1-2, RGB and DVI mode. SAP Selects MTS sound: Mono, Stereo, and SAP. Change the audio language in DTV mode. THUMBSTICK (Up/Down/Left/Right/OK) Allows you to navigate the on-screen menus and adjust the system settings to your preference. MENU Brings up the main menu to the screen. SOUND Selects the sound appropriate for the program's character. FREEZE Freezes the currently-viewed picture. Main picture is frozen in PIP/Twin picturre mode. ADJUST Adjusts screen position, clock, and phase in PC mode. ZOOM Enlarges the main picture size. SIGNAL Displays the digital signal strength. Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.5V AA batteries. Dont mix old or used batteries with new ones. Replace cover. Installation MODE Selects the remote operating mode: TV, VCR, DVD, CABLE, HDSTB or AUDIO. Select other operating modes, for the remote to operate external devices. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TIMER Lets you select the amount of time before your TV turns itself off automatically. FLASHBK Tunes to the last channel viewed. SURF Use to scroll the Surf channel list. CHANNEL UP/DOWN Selects available channels found with EZ scan. RATIO Changes the aspect ratio. CC Select a closed caption:
Off, EZ Mute, and On. EXIT Clears all on-screen displays and returns to TV viewing from any menu. VIDEO Adjusts the factory preset picture according to the room. VCR/DVD BUTTONS Control some video cassette recorders or DVD player ("RECORD" button is not avail-
able for DVD player). PIP Switches between PIP, POP (Picture-out-of-
Picture) and Twin picture modes. PIPCH-/PIPCH+
Changes to next higher/lower PIP channel. PIP INPUT Selects the input source for the sub picture. SWAP Exchanges the PIP/main images. Owners Manual 9 Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. Owners Manual 1.5V 1 . 5 V Batteries Power Cord 75 Round Cable L I G H T MODE POWER T V / V I D E O COMP/RGB/DVI TIMER FLASHBK MUTE SURF VOL CH SAP RATIO INFO CC OK MENU EXIT SOUND VIDEO PLAY PAUSE STOP RECORD REW FF SKIP PIP PIPCH-
PIPCH+
PIPINPUT FREEZE ZOOM SIGNAL SWAP ADJUST Remote Control 2-TV brackets 2-Wall brackets 2-TV bracket bolts Attaching the TV assembly to the wall TV assembly to the wall Attaching the
- Secure the TV assembly by attaching it to a wall for additional support. Install the TV brackets on the TV as shown. Insert the 2 bolts and tighten securely, in the holes on the bracket. Install the wall brackets on the wall with 4 bolts*,
(not supplied with the product), as shown. Match the height of the TV brackets and the wall brackets. Check to be sure the brackets are tightened securely. Secure the TV assembly to the wall with strong strings or wound wire cables, (not supplied with the product), as shown. 10 Plasma TV Installation Instructions Installation Instructions The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. The speakers shown are optional. GROUNDING Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Installation Power Supply Short-circuit Breaker WWall Mount: Horizontal installation all Mount: Horizontal installation Desktop Pedestal Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4 on each side and 2 from the wall. Detailed installation instruc-
tions are available from your dealer, see the optional Wall Mounting Bracket Installation and Setup Guide. For proper ventilation, allow a clearance of 4 on each side and the top, 2.36 on the bottom, and 2 from the wall. Detailed installation instructions are included in the optional Desktop Stand Installation and Setup Guide available from your dealer. To Mount on a Wall Wall mount minimum allowable clearances for ade-
quate ventilation. To Install on a Desktop Pedestal mount minimum allowable clearances for adequate ventilation. 4 inches 2 inches 4 inches 2 inches 4 inches 4 inches 4 inches 4 inches 4 inches 2.36 inches Owners Manual 11 Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection Analog and Digital TV signals provided on one antenna
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments
(Connect to wall antenna socket) Wall Antenna Socket RF Coaxial Wire (75 ohm) Copper Wire R T 1
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT VHF Antenna UHF Antenna Turn clockwise to tighten. Outdoor Antenna Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the Copper wire when connecting the antenna. Antenna Analog/DTV AC INPUT Signal Amplifier In a poor signal area to improve picture quality, purchase and install a signal amplifier. If the antenna needs to be split for two TVs, install a 2-
Way Signal Splitter in the connections. If the antenna is not installed properly, contact your deal-
er for assistance. Analog and DTV signals provided on two separate antennas Wall Antenna Socket RF Coaxial Wire (75 ohm) Copper Wire Analog Antenna Wall Antenna Socket Turn clockwise to tighten. TOR PUT V T 1 RF Coaxial Wire (75 ohm)
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT Digital Antenna Copper Wire NOTE: If you are not sure of the type of signal(s) you are receiving, let EZ Scan complete all the channel signal-type searches. The TV will let you know when the analog, cable, and digital channel scans are complete. 12 Plasma TV Installation NOTE: All cables shown are not included with the TV VCR Setup VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Connection Option 2 1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. 2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) 3. Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT 1, select Video 1 input source) Do not connect to both Video and S-Video at the same time. Cable TV Setup TV Setup Cable PUT DVI INPUT
(PC/DTV INPUT) AUDIO INPUT RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT VIDEO INPUT COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT 1 ANT OUT ANT IN S-VIDEO OUT OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO IN 2 VCR
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channel on cable box. 3. Select channels at the cable box or with the cable box remote control. Connection Option 2 1. Connect the audio and video cables from the Cable Box's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to a Cable Box, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT 1, select Video 1 input source) 3. Select your desired channel with the remote control for cable box. IO INPUT RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT VIDEO INPUT COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT 2 1
(R) AUDIO (L) VIDEO TV VCR OUTPUT SWITCH 3 4 Cable Box RF Cable Owners Manual 13 Installation External A/V Source Setup A/V Source Setup External How to connect Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT 1, select Video 1 input source). 2. Operate the corresponding external equipment. Refer to external equipment operating guide. Monitor Out Setup Monitor Out Setup COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1 NPUT V INPUT) R L AUDIO INPUT VIDEO INPUT
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT Camcorder R AUDIO L VIDEO Video Game Set COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1 RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT VIDEO INPUT
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT The TV has a special signal output capability which allows you to hook up a second TV or monitor. Connect the second TV or monitor to the TVs MONITOR OUTPUT. See the Operating Manual of the second TV or monitor for further details regarding that devices input settings. NOTE Component, RGB-PC/RGB-DTV, DVI-PC/DVI-DTV, DTV input sources cannot be used for Monitor out. S-VIDEO IN
(R) AUDIO (L) VIDEO DVD Setup DVD Setup How to connect 1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. 2. If your DVD only has an S-Video output jack, connect this to the S-
VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output, use S-Video. How to use 1. Turn on the DVD player, insert a DVD. 2. Use the TV/VIDEO or COMP/RGB/DVI button on the remote control to select Component 1 or Component 2. (If connected to S-
VIDEO, select the Video 1 or Video 2 external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below. DIGITAL AUDIO
(OPTICAL) COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1 RS-232C INPUT
(CONTROL/SERVICE) REMOTE CONTROL DVI INPUT COMPONENT1 INPUT OUTPUT R L AUDIO INPUT VIDEO INPUT
(MONO) R AUDIO L VIDEO S-VIDEO Antenna 1 Analog/DTV Ante D or DIGITAL AUDIO OPTICAL
(R) AUDIO (L) B R S-VIDEO
(R) AUDIO (L) or DVD Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PR Pb B-Y Cb PB Pr R-Y Cr PR 14 Plasma TV NOTES Digital Audio will not work for Component 2 input source. Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time. HDSTB Setup HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for DTV (480p,720p,1080i) mode. Installation DIGITAL AUDIO
(OPTICAL) RS-232C INPUT
(CONTROL/SERVICE) REMOTE CONTROL DVI INPUT COMPONENT1 INPUT OUTPUT DVI INPUT
(PC/DTV INPUT) AUDIO INPUT RGB INPUT
(PC/DTV INPUT) COMPONENT 2 COMPONENT 1 R R L AUDIO INPUT VIDEO INPUT DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1
(MONO) R AUDIO L VIDEO S-VIDEO Antenna Analog/DTV AC INPUT or or
(R) AUDIO (L) DIGITAL AUDIO OPTICAL DVI-DTV OUTPUT RGB-DTV OUTPUT
(R) AUDIO (L) DIGITAL AUDIO OPTICAL
(R) AUDIO (L) B R or or Digital Set-top Box How to connect Use the TVs COMPONENT (Y, PB, PR) INPUT, RGB or DVI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections. How to use 1. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) 2. Use TV/VIDEO or COMP/RGB/DVI on the remote control to select Component 1, Component 2, RGB-DTV, or DVI-DTV source. Signal 480i 480p 720p 1080i Component 1/2 RGB-DTV,DVI-DTV Yes Yes Yes Yes No Yes Yes Yes Digital Audio Output Audio Output Digital Send the TVs audio to external audio equipment (stereo system) via the Digital Audio Output Optical port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio Optical Output port. 2. Connect the other end of the optical cable to the digital audio optical input on the audio equipment. 3. Set the TV Speaker option - Off in the AUDIO menu. Refer to page 23. See the external audio equipment instruction manual for operation. Caution: Do not look into the optical output port. Looking at the laser beam may damage your vision. DIGITAL AUDIO
(OPTICAL) COMPONEN COMPONEN RS-232C INPUT
(CONTROL/SERVICE) REMOTE CONTROL DVI INPUT COMPONENT1 INPUT OUTPUT DVI INPUT
(PC/DTV INPUT) AUDIO INPUT RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT Owners Manual 15 Installation PC Setup PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. The TV sends config-
uration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol.
- The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. card, change the screen scanning rate for the graphic card accordingly. How to connect 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Use the TVs RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB INPUT or DVI INPUT to display the PC on the TV. If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or DVI; (the other mode is set to Plug and Play automatically by the TV.) 3. Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required. DIGITAL AUDIO
(OPTICAL) COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1 EMOTE NTROL DVI INPUT COMPONENT1 INPUTOUTPUT DVI INPUT
(PC/DTV INPUT) AUDIO INPUT RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT VIDEO INPUT
(MONO) R AUDIO L VIDEO S-VIDEO Antenna 1 Analog/DTV How to use 1. Turn on the PC and the TV. 2. Turn on the display by pressing the POWER button on the TV's remote control. 3. Select RGB-PC or DVI-PC input source in main input option of SETUP menu. (Refer to P.20) 4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or bright-
ness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. NOTES: Depending on the graphics card, DOS mode may not work if you use a DVI-I cable. Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become per-
manently imprinted on the screen. Use the Orbiter screen saver when possible. The synchronization input form for Horizontal and Vertical frequencies is separate. Monitor Display Specifications (RGB-PC / DVI-PC Mode) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 720x400 640x480 31.468 37.861 31.469 37.927 31.469 37.861 37.500 43.269 70.09 85.08 70.08 85.03 59.94 72.80 75.00 85.00 800x600 1024x768 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 56.25 60.31 72.18 75.00 85.06 60.00 70.06 75.02 16 Plasma TV Installation Operation Operation Screen Setup for PC mode Screen Setup for PC mode
- Be sure to select the RGB-PC/RGB-DTV source before operation.
(For RGB-DTV input source, Position and Reset are available.) In DVI-PC and DVI-DTV input source, settings are not adjustable.
- You can manually adjust picture position and minimize image shaking for the PC input source. Adjustment for screen Position, Clock, and Phase Adjustment for screen Position, Clock, and Phase 1. Press the ADJUST button and then use D / E button to select POSITION, CLOCK, or PHASE. 2. Press OK button and then use D / E / F / G buttons to make appropriate adjust-
ments. The PHASE adjustment range is -16 ~ +16. The CLOCK adjustment range is -30 ~ +30. 3. Press OK button. Initializing (Reset to original factory values) Initializing (Reset to original factory values)
- To initialize the adjusted values 1. Press the ADJUST button and then use D / E button to select the RESET option. 2. Press OK button and then use F / G button to select Yes. 3. Press OK button POSITION G CLOCK PHASE RESET Adjust Close F D E G Initialize Settings POSITION CLOCK PHASE RESET G Adjust Close Owners Manual 17 Operation TTurning the TV On urning the TV On Turning on the TV just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the TV/VIDEO, CH (D / E) button on the TV or press the POWER, TV/VIDEO, COMP/RGB/DVI, CH (+, -), Number (0 ~ 9) button on the remote control and then the TV will switch on. Turning on the TV (power cord is still connected) 1. If the TV was turned off with the Press the ON/OFF button on the TV to turn the TV on. ON/OFF button on the TV 2. If the TV was turned off with the remote control and then the Press the ON/OFF button on the TV and then press the POWER, TV/VIDEO, COMP/RGB/DVI, ON/OFF button on the TV CH (+, -), Number (0 ~ 9) button on the remote control to turn the TV on. NOTE If you intend to be away on vacation, disconnect the power plug from the wall power outlet. On-screen Menus Language Selection On-screen Menus Language Selection
- The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Language. 3. Press the G button and then use D / E button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio Caption VIDEO Caption Mode AUDIO TIME OPTION Caption Option Language G Cinema Demo ISM Method Low Power LOCK MENU Prev. English Espaol Franais 18 Plasma TV Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search)
- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection changes. Operation SETUP EZ Scan Ch.Edit VIDEO DTV Signal ANT 1 Air ANT 1 Cable Ch. Label Main Input Sub Input SET ID AUDIO TIME OPTION LOCK Select antenna input, press Select DTV cable band, press Select antenna input, press Analog/DTV Air Analog/DTV Cable 1. STD 2. HRC 3. IRC Analog/DTV Air Analog/DTV Cable MENU Prev. MENU Prev. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select EZ Scan. 3. Press the G button and then use D / E button to select antenna input (Based on your connections to antenna 1-2). Analog/DTV Air:
Watching the Over-the-air, cable, and digital over-the-air signals via antenna 1 input port Analog/DTV Cable:
Watching the Over-the-air, cable, and digital cable signals via antenna 1 input port Analog+DTV Air (ANT2):
Watching the Over-the-air, and cable signal via antenna 1 input port and the digital over-the-air signal via antenna 2 input port Analog/DTV Cable (ANT2):
Watching the Over-the-air, and cable signal via antenna 1 input port and the digital cable signal via antenna 2 input port
* Cable Service Band Note: Select Std=Standard, HRC=HRC Band, or IRC=IRC Band.
(For further band information, contact your cable service provider.) 4. Press the OK button to begin the channel search. Allow EZ Scan to complete the channel search cycle for TV, CATV, and DTV/CADTV. Channel Edit Channel Edit
- Create two different types of channel lists in memory: Custom list and Surf"
(Favorite) channel list from the default channel list created from the EZ Scan channel search.
- A custom list can be created by toggling each channel on or off with OK button. Once a channel is highlighted, you will be able to see whether the channel is currently added or deleted by referring to the small window at the top-left corner of the screen. You can create your own Surfchannel list with up to 10 channels. It appears at the bottom-left corner of the screen. Use the SURF button on the remote control when a channel is highlighted, to add or delete the channel from the Surf channel list.
- You can create your SURF channel list from the channel list memorized from EZ Scan.
- CATV is available for 1-125 channel. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Ch. Edit. 3. Press the G button. You will now see a screen filled with channel numbers and a preview picture. 4. Use D / E / F / Gbutton to select a channel and then use the OK button to add or delete it. Press SURF to add the channel to the Surf List. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. G Selection ( G or ) leads you to the channel edit screen. SETUP EZ Scan Ch.Edit VIDEO DTV Signal Ch. Label Main Input Sub Input SET ID AUDIO TIME OPTION LOCK MENU Prev. Owners Manual 19 Operation DTV Signal Strength DTV Signal Strength
- Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation.
- Digital DTV Signals: May not be available in all areas, nor are broadcast on all programs. 1. Press the SIGNAL button. 2. View the on-screen signal strength monitor to see the quality of the signal being received. You can also check the DTV Signal strength with the SETUP menu. Channel Label Setup Channel Label Setup
- Choose preset labels for your channels.
If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan-
nel - even if you didn't preset a label for the channel. SETUP EZ Scan Ch.Edit VIDEO DTV Signal Ch. Label Main Input Sub Input SET ID AUDIO TIME OPTION LOCK MENU Prev. G Selection ( G or ) leads you to the channel logo screen. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Ch.Label. 3. Press the G button. You will now see a screen filled with Labels and a preview screen. 4. Use the CH +/- button to select a channel to Label. 5. Use D / E / F / G button to select the appropriate label for the channel, then press OK button to set the Label to the selected channel. 6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Main Picture Source Selection Main Picture Source Selection
- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Main Input. 3. Press the G button and then use D / E button to select the source: DTV, Analog, Video1, Video2, Component1, Component2, RGB-DTV (or RGB-PC), DVI-DTV
(or DVI-PC). 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP EZ Scan Ch.Edit VIDEO DTV Signal Ch. Label Main Input Sub Input SET ID G AUDIO TIME OPTION LOCK MENU Prev. DTV Analog Video1 Video2 Component1 Component2 RGB-DTV DVI-DTV 20 Plasma TV VVideo Menu Options ideo Menu Options EZ Picture EZ Picture
- EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. Operation
- When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ Picture automatically changes to Off.
- Day Light, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at the factory and are not adjustable. 1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below:
Off (your own settings), Day Light, Normal, Night Time, Movie, Video Game, and Sports. You can also use the VIDEO menu to adjust EZ Picture. 2. Press the EXIT button to save and return to TV viewing. Manual Picture Control (Off option) option) Manual Picture Control (
- Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option
(Contrast, Brightness, Color, Sharpness, or Tint). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Color TTemperature Control emperature Control Color
- Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Color Temperature . 3. Press the G button and then use D / E button to select either Warm, Medium, or Cool. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. VVideo Preset ideo Preset
- Use to quickly reset all the Video menu options to their original factory preset values. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Video Preset . 3. Press the G button to reset the Video menu options to original values. SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness Tint TIME OPTION Color Temperature Video Preset 85 50 50 50 0 G R G LOCK MENU Prev. SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness TIME OPTION Tint Color Temperature G Video Preset LOCK MENU Prev. Warm Medium Cool SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness TIME OPTION Tint Color Temperature Video Preset G Selection ( G or ) presets the video configuration. LOCK MENU Prev. Owners Manual 21 Operation Audio Menu Options Audio Menu Options Audio Language Audio Language
- Other languages may be available if a digital signal is provided by the broad-
casting station. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Audio Language. 3. Press the G button and then use D / E button to select: English, Spanish, or French. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. English Spanish French SETUP Audio Language G VIDEO AUDIO TIME OPTION EZ SoundRite EZ Sound Balance Treble Bass Front Surround TV Speaker BBE LOCK MENU Prev. EZ SoundRite EZ SoundRite
- Scans for changes in sound level during commercials, then adjusts the sound to match the specified audio level. SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select EZ SoundRite. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Off On SETUP Audio Language EZ SoundRite G VIDEO AUDIO TIME OPTION EZ Sound Balance Treble Bass Front Surround TV Speaker BBE LOCK MENU Prev. EZ Sound EZ Sound
- EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content.
- When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches Off.
- Normal, Stadium, Theater, and Music are preset for good sound quality at the factory and are not adjustable. 1. Press the SOUND button repeatedly to select the appropriate sound setup as shown below:
Off (your own settings), Normal, Stadium, Theater, and Music. You can also adjust EZ Sound in the AUDIO menu. 2. Press EXIT button to save and return to TV viewing. 22 Plasma TV Audio Menu Options continued Audio Menu Options continued Operation Manual Sound Control (Off option) option) Manual Sound Control (
- Adjust the sound to suit your taste and room situations. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select the desired sound option
(Balance, Treble, or Bass). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. L R G SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME OPTION EZ Sound Balance Treble Bass Front Surround TV Speaker BBE LOCK MENU Prev. 0 50 50 Stereo/SAP Broadcasts Setup Broadcasts Setup Stereo/SAP
- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one.
- Stereo or SAP can be received only when the TV station transmits those signals even though you have selected Stereo or SAP.
- Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
- Select Mono if you want to listen to the mono sound in remote fringe areas during stereo/SAP broadcasting. 1. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn. If other languages available on the digital signal, select them with the SAP button. 2. Press EXIT button to save and return to TV viewing. Front Surround Front Surround
is a trademark of SRS Labs, Inc.
- TruSurround XT technology is incorporated under license from SRS Labs, Inc.
- Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Front Surround. 3. Press the G button and then use D / E button to select Off, 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT.. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement that produces an immersive sound experience from standard stereo material. 3D EchoSound System Creates a stunning simulated stereo effects from any mono sound and a real-
istic three-dimensional sound with a very wide and deep sound stage into stereo sound. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME EZ Sound Balance Treble Bass Front Surround G Off OPTION TV Speaker BBE LOCK MENU Prev. 3D EchoSound System SRS TruSurround XT Owners Manual 23 Operation TV Speakers On/Off Setup f Setup TV Speakers On/Of
- Turn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select TV Speaker. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME OPTION EZ Sound Balance Treble Bass Front Surround TV Speaker G BBE Off On LOCK MENU Prev. previous menu. BBEBBE
- BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select BBE. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME OPTION EZ Sound Balance Treble Bass Front Surround TV Speaker BBE LOCK MENU Prev. G Off On 24 Plasma TV Operation TTime Menu Options ime Menu Options Auto Clock Setup Auto Clock Setup
- The time is set automatically from a digital channel signal.
- The digital channel signal includes information for the current time provided by the broadcasting station.
- Set the clock manually, if the current time is set incorrectly by the auto clock function. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Clock. 3. Press the G button and then use D / E button to select On. 4. Press the G button and then use D / E button to select your viewing area time zone: Eastern, Central, Mountain, Pacific, Alaska, or Hawaii. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Off On Time Zone Eastern SETUP Auto Clock G Manual Clock Off Timer On Timer Sleep Timer Auto Off VIDEO AUDIO TIME OPTION LOCK MENU Prev. Manual Clock Setup Manual Clock Setup
If current time setting is wrong, reset the clock manually. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Manual Clock. 3. Press the G button and then use F / G button to select either the year, date, or time option. Once selected, use the D / E button to set the year, date, and time options. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Auto Clock Manual Clock G Year - - - -
Date - - / - -
Time - - : - - - -
Off Timer On Timer Sleep Timer Auto Off VIDEO AUDIO TIME OPTION LOCK MENU Prev. On/Offf TTimer Setup imer Setup On/Of
- Timer function operates only if current time has been set.
- Off-Timer function overrides On-Timer function if they are set both set to the same time.
- The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Off Timer or On Timer. 3. Press the G button and then use D / E button to select On. To cancel On/Off timer function, select Off. 4. Press the G button and then use D / E button to set the hour. 5. Press the G button and then use D / E button to set the minutes. 6. For only On timer function Press the G button and then use D / E button to select the channel at turn-on. Press the G button and then use D / E button to set the sound level at turn-on. 7. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off VIDEO AUDIO TIME OPTION LOCK MENU Prev. G Off On Time 6 : 30 AM Ch. TV 2-0 Vol 17 Owners Manual 25 Operation Sleep TTimer imer Sleep
- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
- You can also set up the Sleep Timer in the TIME menu. 1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2. When the number of minutes you want is displayed on the screen, press the OK button. The timer begins to count down from the number of minutes selected. 3. To check the remaining minutes before the TV turns off, press the TIMER button once. 4. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off. Auto Offf Auto Of
If set to on and there is no input signal, the TV turns off vertically after 10 min-
utes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off VIDEO AUDIO TIME OPTION LOCK MENU Prev. G Off On 26 Plasma TV Option Menu Features Option Menu Features Operation Aspect Ratio Control Aspect Ratio Control
- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-
played. If you are viewing a picture with a 16:9 aspect ratio, you cant use the Horizon aspect ratio option.
- Horizon aspect ratio is not available for Component 1-2 (720p/1080i)/RGB-DTV (720p/1080i)/DVI-DTV (720p/1080i)/DTV(720p/1080i) input source.
- RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
- Note: If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. 1. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the OPTION menu. Set By Program Selects the proper picture proportion to match the sources image. (4:3 4:3, 16:9 16:9) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides. 16:9 Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Horizon Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view. Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage. Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted. You can adjust the enlarge proportion of Cinema Zoom using D / E button. The adjustment range is 1~16. Owners Manual 27 Operation Caption Caption 1. Use the CC button repeatedly to select Caption Off, EZ Mute, or On. EZ Mute shows the selected captions option (if available on program) when the TV sound is muted. You can also use the OPTION menu to select Caption. 2. Press EXIT button to save and return to TV viewing. Caption Mode Caption Mode Analog Broadcasting System Captions
- Select a caption mode for displaying captioning information if provided on a program.
- Analog caption displays information at any position on the screen usually the program's dialog.
- Text displays information, usually at the bottom position and is used for a data service, generally not program related.
- Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna 1 source.
- This TV is programmed to remember the caption/text mode it was last set to, when you turn the power off. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Mode. 3. Press the G button and then use D / E button to select caption: CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio Caption VIDEO Caption Mode G Caption Option AUDIO Language TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. CC 1 CC 2 CC 3 CC 4 Text 1 Text 2 Text 3 Text 4 Digital Broadcasting System Captions
- Choose the language you want the DTV/CADTV Captions to appear in.
- Languages can be chosen for digital sources only if they are included on the program. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Mode. 3. Press the G button and then use D / E button to select available caption lan-
guages: English, Spanish, or French. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio Caption VIDEO Caption Mode G Caption Option AUDIO Language English Spanish French TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. 28 Plasma TV Operation SETUP Aspect Ratio Style Custom Caption Size A Standard VIDEO Caption Mode Caption Option G AUDIO Language TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. Font Font 0 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Edge Type None Edge Color Black Option Menu Features continued Option Menu Features continued Caption Option Caption Option
- Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Option. 3. Press the G button and then use F / G button to select Custom. 4. Use D / E button to customize the Style, Font, etc., to your preference. A pre-
view icon is provided at the bottom of the screen, use it to see the caption lan-
guage. Size: Set the size the words will appear in. Font: Select a typeface for the words. Text Color: Choose a color for the text. Text Opacity: Specify the opacity for the text color. Bg (Background) Color: Select a background color. Bg (Background) Opacity: Select the opacity for the background color. Edge Type: Select an edge type. Edge Color: Select a color for the edges. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Cinema Mode Setup
- Set up the TV for the best picture appearance for viewing movies. 1. Press the MENU button and then use DD / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Cinema. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio Caption VIDEO Caption Mode Caption Option AUDIO Language TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. G Off On Demo Demo
- EZ Demo Use to scan the features and menu options available on your TV.
- XD Demo Use to see the difference between XD Demo On and XD Demo Off. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Demo. 3. Press the G button and then use D / E button to select EZ Demo or XD Demo. 4. Press the G button to start EZ Demo or XD Demo. Press EXIT button to stop EZ Demo or XD Demo. SETUP Aspect Ratio Caption VIDEO Caption Mode Caption Option AUDIO Language TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. G EZ Demo Demo Owners Manual 29 Operation ISM (Image Sticking Minimization) Method ISM (Image Sticking Minimization) Method
- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in an ghost image remaining; even when you change the image. Avoid allowing any fixed image to remain on the TV's screen for a long period of time. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select ISM Method. 3. Press the G button and then use D / E button to select either Normal, Orbiter, Inversion, or White Wash. Normal If image sticking is never a problem, ISM is not necessary - set to Normal. When image is stopped, screen light automatically get dark to prevent ghost images, and image is appeared, screen light get bright,automatically. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move once per minute: Right Right Downside Downside Left LeftUpside Upside. Inversion Inversion will automatically invert the plasma display panel color every 30 min-
utes. White Wash White Wash remove s permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Low Power Low Power
- Low power reduces the plasma display's power consumption. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Low power. 3. Press the G button and then use D / E button to select On or Off. If you select On, the screen darkens. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio Caption VIDEO Caption Mode Caption Option AUDIO Language TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. G Normal Orbiter Inversion White Wash SETUP Aspect Ratio Caption VIDEO Caption Mode Caption Option AUDIO Language TIME OPTION Cinema Demo ISM Method Low Power LOCK MENU Prev. G Off On Split Zoom (DTV 720p, or 1080i mode only) Split Zoom (DTV 720p, or 1080i mode only)
- Enlarges the picture with correct proportions.
- When enlarging the picture, the image may become distorted. 1. Press the ZOOM button in DTV 720p, or 1080i modes. 2. Use the D / E / F / G buttons to select the screen split zoom section. 3. To return to normal viewing, press the ZOOM button again. F F F F 30 Plasma TV Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked. 2. Specify a password 3. Enablethe lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Movies previously shown in theaters:
Movie Ratings :
Blocking Off G PG PG-13 R NC-17 X If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
(Permits all programs)
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Restricted)
(No one 17 and under admitted)
(Adult only) Ratings for Television programs including made-for-TV movies :
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
(All children)
(Children 7 years older) TV-G TV-PG TV-14 TV-MA TV-Y TV-Y7 TV Rating Children:
Age Fantasy Violence TV Rating General:
Age Dialogue - sexual dialogue Language - adult language Sex - sexual situations Violence Aux. Block Video 1, 2 Component 1, 2 RGB, DVI
(On, Off)
(On, Off)
(On, Off)
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
(applies to TV-G, TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA) Owners Manual 31 Operation Parental Lock Setup Parental Lock Setup
- Lets you set up blocking schemes to block specific channels, ratings, and external viewing sources.
- A password is required to gain access to this menu if the Lock System is turned on SETUP Lock System G Set Password VIDEO Block Ch. Off On Movie Rating TV Rating-Children TV Rating-General Aux. Block AUDIO TIME OPTION LOCK MENU Prev. 1. Press the MENU button and then use D / E button to select the LOCK menu. Then, press the G button If Lock is already set, enter the password as requested. The TV is set up with the initial password 7-7-7-7. 2. Use the D / E button to choose from the following Lock Menu options. Once the option is selected, change the settings to your preference. Lock System: Activates or disables the blocking scheme you set up previ-
ously. Set Password: Change the password by inputting a new password twice. Movie Rating (MPPA): Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. TV Rating-Children: Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intend-
ed for mature audiences in the TV Rating - sub menu, your children can view those programs. TV Rating-General: Based on the ratings, blocks certain TV programs that you and your family do not want to view. Aux. Block: Enables you to select a source to block from the external source devices you have hooked up. 3. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Note If you ever forget your password, key in 7, 7, 7, 7 on the remote control. 32 Plasma TV Operation PIPPIP (Picture-In-Picture) / POP
(Picture-In-Picture) / POP / T/ Twin Picture win Picture
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
- Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen. If you set the block/rating for Lock menu options in PIP/Twin Picture mode, Rating Blocked doesnt display on screen.
WWatching PIP/POP/T atching PIP/POP/Twin Picture win Picture Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below. PIP Mode POP Mode Twin Picture Mode F D E TV 2-0 TV 4-0 TV 6-0 PIP Off Selecting an Input Signal Source for PIP/Twin Picture win Picture Selecting an Input Signal Source for PIP/T Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes the PIP source. You can also select sources for the Sub Input in the SETUP menu. Main Picture Source Available Sub Picture Sources DTV Signal Analog Signal Analog, Video 1, and Video 2 DTV, Analog, Video 1, and Video 2 Swapping the PIP/T/Twin Picture win Picture Swapping the PIP Use the SWAP button to switch the main and sub pictures. Component 1, Component 2, RGB-PC (or RGB-DTV), DVI-DTV (or DVI-PC) input sources for the main picture cant be used to swap the main and sub pictures. Main Picture Sub Picture Main Picture Sub Picture TV Program Selection for PIP TV Program Selection for PIP 1. Press the PIP button. 2. Select the Analog or DTV option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+ /
PIPCH- button to select a channel for the sub picture. Owners Manual 33 Operation Moving the PIP sub picture sub picture Moving the PIP In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen. Adjusting Main and Sub Picture Sizes for TTwin Picture win Picture Adjusting Main and Sub Picture Sizes for Use the D / E / F / G button to change main and sub picture sizes in Twin Picture mode. i.e) If the maximal adjusted screen is 16:9, the large screen appears the gray part at both the up and down sides. If the maximal adjusted screen is 4:3, the large screen is filled with entire screen vertically as shown. POPPOP (Picture-out-of-Picture: Channel Scan)
(Picture-out-of-Picture: Channel Scan)
- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen.
- Note: Run EZ Scan channel search before using POP mode. 1. Press the PIP button to activate the POP mode while in PIP mode. Channel selection: Use F button to enlarge the selected channel being searched on the PIP screen to shift it for viewing on the Main screen. PIP selection: Use D / E button to select one of 3 PIP screen pictures in POP mode. Input source selection for PIP: Use PIP INPUT button or Sub Input option on the SETUP menu to select an input source for the sub picture (You cant select DTV for main and sub pic-
ture simultaneously). You can only select the Analog and DTV signal for sub input source in POP mode. 2. Press the EXIT button to cancel POP mode. F D E TV 2-0 TV 4-0 TV 6-0 34 Plasma TV External Control Device Setup External Control Device Setup External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitors functions externally.
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
- RS-232C connection cables are not supplied with the Monitor. RS-232C Setup RS-232C Setup DIGITAL AUDIO
(OPTICAL) COMPONENT 2 COMPONENT 1 DVD
. DTV INPUT MONITOR OUTPUT A/V INPUT 1 RS-232C INPUT
(CONTROL/SERVICE) REMOTE CONTROL DVI INPUT COMPONENT1 INPUT OUTPUT DVI INPUT
(PC/DTV INPUT) AUDIO INPUT RGB INPUT
(PC/DTV INPUT) R L AUDIO INPUT VIDEO INPUT
(MONO) R AUDIO L VIDEO S-VIDEO Antenna 1 Analog/DTV Antenna 2 DTV AC INPUT PC TType of Connector; D-Sub 9-Pin Male ype of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection RS-232C Configurations RS-232C Configurations 1 5 9 6 7-Wire Configurations
(Standard RS-232C cable) 3-Wire Configurations
(Not standard) PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 4 6 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Owners Manual 35 External Control Device Setup Set ID Set ID Use this function to specify a monitor ID number. Refer to Real Data Mapping. See page 37. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select SET ID. 3. Press the G button and then use D / E button to adjust SET ID to choose the desired monitor ID number. The adjustment range of SET ID is 1 ~ 99. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP EZ Scan Ch.Edit VIDEO DTV Signal Ch. Label Main Input Sub Input SET ID G 1 AUDIO TIME OPTION LOCK MENU Prev. Communication Parameters Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None
* Use a crossed (reverse) cable. Stop bit : 1 bit Communication code : ASCII code TTransmission / Receiving Protocol ransmission / Receiving Protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command to control the set. (j or k)
* [Command 2]: Second command to control the set.
* [Set ID]: You can adjust the set ID to choose desired monitor ID number in Setup menu. Adjustment range is 1
~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol.
* [DATA]: To transmit command data. Transmit FF data to read status of command.
* [Cr]: Carriage Return ASCII code 0x0D
* [ ]: ASCII code space (0x20) OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: Not supported function 3: Wait more time Command Reference List Command Reference List COMMAND 1 COMMAND 2 DATA
(Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Key Lock Mode 14. PIP/POP/Twin Picture 15. PIP Position 16. Treble 17. Bass 18. Balance 19. Color Temperature 20. PIP Input Source 21. ISM Method 22. White Wash 23. Orbiter Time Setting 24. Orbiter Pixel Setting k k k k k k k k k k k k k k k k k k k k j j j j a b c d e f g h i j k l m n q r s t u y p q r s 0 ~ 1 0 ~ 9 0 ~ 15 0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 1 0 ~ 1 0 ~ 3 0 ~ 3 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 2 0 ~ 3 0 ~ 2 0 ~ 1 1 ~ 64 0 ~A COM-
MAND 1 COM-
MAND 2 DATA 0 DATA 1 DATA 2 DATA 3
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 25. Channel Tuning m a 26. Channel Add/Del m b m c 27. Key 01 ~ 87 00 ~ 01 01 ~ 87 00 ~ FE 00 ~ 15 36 Plasma TV External Control Device Setup 01. Power (Command2:a) G To control Power On/Off of the Monitor. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
1 : Power On 05. Volume Mute (Command2:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on) 1 : Volume mute on (Volume off)
* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function. Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
02. Input Select (Command2:b) (Main Picture Input) G To adjust volume. 06. Volume Control (Command2:f) G To select input source for the Monitor. Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV 1: Analog 2: Video 1 3: Video 2 4: Component 1 Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
5: Component 2 6: RGB-DTV 7: RGB-PC 8: DVI-DTV 9: DVI-PC 03. Aspect Ratio (Command2:c) (Main picture format) G To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Option menu. Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 0: Auto (Set by program) 1: Normal screen (4:3) 2: Wide screen (16:9) 3: Horizon 4: Zoom 1 Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
5: Zoom 2 6: Cinema Zoom (1) 15: Cinema Zoom (16) 04. Screen Mute (Command2:d) G To select screen mute on/off. Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
You can also adjust volume with the volume buttons on remote control. Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g) G To adjust screen contrast. You can also adjust contrast in the Video menu. Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h) G To adjust screen brightness. You can also adjust brightness in the Video menu. Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 64 : Step 100 Owners Manual 37 External Control Device Setup 09. Color (Command2:i) G To adjust the screen color. You can also adjust color in the Video menu. Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping. See page 37. Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j) G To adjust the screen tint. You can also adjust tint in the Video menu. Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64 Refer to Real data mapping. See page 37. Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k) G To adjust the screen sharpness. You can also adjust sharpness in the Video menu. Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 37. Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l) G To select OSD (On Screen Display) on/off. Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off 1: OSD on Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m) G To lock the remote control and the front panel controls on the set. Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
1: Lock on 38 Plasma TV 14. PIP / POP / Twin Picture (Command2:n) G To control the PIP (Picture-in-Picture)/POP/Twin picture. You can also control the PIP/POP/Twin picture using the PIP button on the remote control. Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP off 1: PIP Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
2: POP 3: Twin Picture 15. PIP Position (Command2:q) G To select sub picture position for PIP. Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen 1: Right up on screen 2: Left up on screen 3: Left down on screen Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
16. Treble (Command2:r) G To adjust treble. You can also adjust treble in the Audio menu. Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 37. Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
17. Bass (Command2:s) G To adjust bass. You can also adjust bass in the Audio menu. Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 37. Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
18. Balance (Command2:t) G To adjust balance. You can also adjust balance in the Audio menu. Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 37. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
19. Color Temperature (Command2:u) G To adjust color temperature. You can also adjust color temperature in the Video menu. 24. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission External Control Device Setup Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Warm 1: Medium 2: Cool Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
20. PIP Input Select (Command2:y) G To select input source for sub picture in PIP/Twin pic-
ture mode. Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: DTV 1: Analog 2: Video 1 3: Video 2 Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
21. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal 1: Orbiter 2: Inversion Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
22. White Wash (Command2:q) G To control the white wash function on/off. You can also adjust white wash in Option menu. Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: White Wash off 1: White Wash on Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
23. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 64 Refer to Real data mapping. See page 37. Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: A Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
25. Channel Tuning (Command: m a) G To tune channel to following physical/major/minor number Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 0: Physical channel number (Transmit by Hexadecimal code)
* NTSC air: 02 ~ 45 NTSC cable: 01, 0E ~ 7D ATSC air: 01 ~ 45 ATSC cable: 01 ~ 87 1: Major channel number (Transmit by Hexadecimal code)
* NTSC air: 02 ~ 45, NTSC cable: 01 ~ 7D ATSC air: 01 ~ 63, ATSC cable: 01 ~ 87 2: Minor channel number (Transmit by Hexadecimal code)
* NTSC air: 00 (must be 0), ATSC: 01 ~ FE 3: High nibble Main picture: 0, Sub picture (PIP): 1 Low nibble NTSC air: 0, NTSC cable: 1, ATSC: 2, Example) If you want PIP channel tuned to ATSC cable (stan-
dard) 30-5, the command sequence is ma 00 1e 1e 05 12. Refer to Real data mapping. See page 37.
* To change the channel between ATSC air and ATSC cable, change the antenna setting with EZ Scan. Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][x]
[a][ ][Set ID][ ][NG][Data0][x]
26. Channel Add/Del (Command: m b) G To add and delete the channels Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete 1: Channel Add Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]
27. Key (Command: m c) G To send IR remote key code Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 41. Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
* Its impossible to command the IR Code 0x08 and 0xC4 with RS-232C. Owners Manual 39 IR Codes IR Codes IR Codes How to Connect How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Remote Control IR Codes G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz TC T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 G Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame G Lead code Repeat code Tf 9 ms 4.5 ms G Repeat code 0.55 ms G Bit description Bit 0 9 ms 0.56 ms 1.12 ms 2.25 ms Bit 1 G Frame interval : Tf The waveform is transmitted as long as a key is depressed. Tf Tf 40 Plasma TV Tf=108ms @455KHz 0.56 ms 2.24 ms Code (Hexa) Function Note 0x0B 0x08 0xC4 0xC5 0x98 0x79 0x0E 0x10 ~ 0x19 0x4C 0x1A 0x09 0x02 0x03 0x00 0x01 0x1E 0xAA 0x39 0x40 0x41 0x07 0x06 0x44 0x43 0x52 0x4D 0x5B 0x60 0x72 0x71 0x61 0x63 0x65 0x7B 0x0A 0xCB 0xD6 0x5A 0xD0 0xBF 0xD4 0xD5 0xD7 0xC6 0x76 0x77 0xAF 0x70 0x96 TV/VIDEO MODE POWER POWER ON POWER OFF COMP/RGB/DVI RATIO TIMER Number Key 0~ 9
- (Dash) FLASHBK MUTE VOL +
VOL -
CH +
CH -
SURF INFO CC D E F G OK MENU SOUND VIDEO EXIT PIP PIPCH -
PIPCH +
PIP INPUT SWAP FREEZE ZOOM SAP ADJUST TV VIDEO 1 VIDEO 2 COMPONENT 1 COMPONENT 2 RGB-PC RGB-DTV DVI-DTV Ratio 4:3 Ratio 16:9 Ratio Zoom MULTI PIP SIGNAL R/C Button R/C Button R/C Button (Power On/Off) Discrete IR Code (Only Power On) Discrete IR Code (Only Power Off) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code (TV Input Selection) Discrete IR Code (Video1 Input Selection) Discrete IR Code (Video2 Input Selection) Discrete IR Code (Component1 Input Selection) Discrete IR Code (Component2 Input Selection) Discrete IR Code (RGB-PC Input Selection) Discrete IR Code (RGB-DTV Input Selection) Discrete IR Code (DVI-DTV Input Selection) Discrete IR Code (Only 4:3 Mode) Discrete IR Code (Only 16:9 Mode) Discrete IR Code (Only Zoom Mode) Channel Search R/C Button IR Codes Owners Manual 41 Programming the Remote Programming the Remote Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode 1. Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding MODE button (VCR) on the remote control, while pointing at the component. Test the POWER and CH +/- buttons to see if the component responds properly. If not, the remote requires programming to operate the device. 2. Turn on the component to be programmed, then press the corresponding MODE button on the remote control. 3. Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code. 4. There are two ways to find the right code for the component. A. If you press the CH +/- buttons repeatedly, the codes will change one at-a-time. Press the POWER button after each code change. If the right code is found, the device will turn off. B. Enter a code number using the number buttons on the remote. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off. 5. Press the MENU button to store the code. 6. Test the remote control functions to see if the component responds properly. If not, repeat from step 2. 42 Plasma TV Programming Codes Programming Codes VCRs VCRs Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO Codes 034 016 043 046 124 125 146 072 031 033 103 012 023 039 043 035 037 129 028 031 033 108 003 040 135 031 033 041 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE 004 018 026 034 043 063 137 150 031 033 031 033 012 013 015 033 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 Brand KENWOOD LG (GOLDSTAR) LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER Codes 014 034 039 043 047 048 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 Brand PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS 010 SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY Codes 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 00 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 009 Codes 003 004 039 042 046 052 053 112 014 005 007 014 024 026 092 007 007 065 090 080 081 019 030 023 020 030 040 057 062 066 032 072 008 022 025 054 052 074 Brand GOLDEN CHANNEL HAMLIN HITACHI HOSPITALITY JERROLD LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC OAK PANASONIC PARAGON PHILIPS Codes 030 049 050 055 052 055 070 077 002 003 004 008 009 010 052 069 074 001 106 101 005 037 033 010 012 064 079 100 028 032 015 028 038 071 073 016 031 037 053 044 047 100 006 012 013 020 Brand PIONEER Codes 065 085 090 034 051 052 063 076 POST NEWS WEEK 016 059 PRUCER 011 048 071 072 PTS 073 074 100 047 049 050 057 025 091 102 107 030 068 003 011 041 042 043 045 046 022 030 052 PULSAR RCA REGAL REGENCY REMBRANT RK SAMSUNG SCIENTIFIC ATLANTA SHERITECH SIGNAL SIGNATURE INSTANTREPLAY JCL JCPENNY JENSEN JVC CACATVTV Brand ABC AJIN ANTRONIK ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD GE GEMINI GI Programming Codes Brand TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Codes 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 040 012 048 012 034 046 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 Brand SL MARX SPRUCER STARCOM STARGATE SYLVANIA TADIRAN TAEKWANG TAIHAN TANDY TEXSCAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH Codes 030 047 078 002 004 008 009 008 030 067 030 110 105 017 029 067 039 040 056 100 007 014 024 004 053 005 007 014 024 026 027 032 035 012 015 018 086 087 088 089 100 114 060 093 Owners Manual 43 Programming Codes HDSTB HDSTB Brand Codes ALPHASTAR DSR AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER 013 014 015 018 123 050 051 126 129 053 053 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME 036 055 008 009 012 077 054 050 145 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 089 Codes Brand Codes Brand Codes Brand EUROPLUS FUJITSU 114 017 021 022 027 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI HOUSTON TRACKER HUGHES HYTEK JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 031 059 101 139 140 033 037 039 051 057 104 068 053 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC PANSAT 121 PERSONAL CABLE 117 071 PHILIPS 105 PICO 019 102 PRESIDENT 030 110 111 PRIMESTAR 072 PROSAT 066 106 RCA REALISTIC 043 074 SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057 SCIENTIFIC ATLANTA SONY 085 032 138 103 STARCAST SUPER GUIDE TEECOM TOSHIBA UNIDEN UNIDEN VIEWSTAR WINEGARD ZENITH 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 Audio Audio Brand AIWA AKAI ANAM BURMECTER CARVER CLARION DAEWOO DENON FANTASIA FINEARTS FISHER LG(GOLDSTAR) HAITAI HARMAN/KARDON 068 INKEL Codes 014 028 070 096 125 129 139 229 230 163 003 014 017 023 059 106 189 216 217 235 236 252 086 199 027 053 060 084 102 148 198 221 015 075 130 143 071 022 089 099 001 021 024 029 087 107 108 110 190 191 192 210 211 212 239 034 035 188 222 037 058 062 069 078 079 095 121 122 149 150 151 152 153 154 155 157 158 159 160 189 207 222 224 225 226 227 243 247 Brand JVC KEC KENWOOD KOHEL NAD LOTTE LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX NAD ONKYO OPTIMUS PANASONIC PENNEY Codes 004 013 141 185 186 187 038 050 067 089 170 171 197 206 215 222 030 045 046 014 016 036 098 100 172 173 174 175 176 177 178 179 180 181 183 201 202 208 213 214 219 223 232 238 240 103 111 002 018 020 025 034 041 081 090 097 112 049 104 107 046 013 040 041 047 048 056 057 132 133 140 158 007 033 064 113 142 220 241 251 104 Brand PHILIPS PIONEER QUASAR RCA RCX REALISTIC SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SONY TAEKWANG TEAC TECHNICS Codes Brand Codes TOSHIBA THE VICTOR WARDS YAMAHA 147 218 137 061 088 131 089 054 055 066 092 199 026 112 143 253 039 042 043 063 065 091 093 094 115 123 127 250 113 080 092 103 106 124 145 146 182 193 194 195 203 204 244 245 246 011 135 138 144 019 083 234 106 186 031 032 051 052 072 082 117 119 156 184 199 200 206 209 005 006 158 044 045 109 114 118 126 248 249 012 020 073 074 076 077 105 161 162 163 164 165 166 167 168 169 205 231 233 242 254 010 085 106 136 185 187 237 101 113 128 134 DVDDVD Brand Codes 022 020 014 005 006 APEX DIGITAL DENON GE HARMAN KARDON 027 012 JVC LG 001 010 016 025 Brand MAGNAVOX MARANTZ MITSUBISHI NAD ONKYO PANASONIC Codes 013 024 002 023 008 017 003 009 Brand PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG Codes 013 004 026 021 005 006 005 006 011 015 Brand SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 007 005 006 019 008 009 018 010 016 025 44 Plasma TV TTroubleshooting Checklist roubleshooting Checklist Troubleshooting Checklist Check whether the TV is turned on. Is the power cord inserted into wall power outlet?
No picture &
No sound Test the wall power outlet, plug another products power cord into the outlet where the TVs power cord was plugged in. Picture OK &
No sound Press the VOLUME (G) button. Sound muted? Press MUTE button. Check to see if there is any object between the TV and the remote control causing obstruction. The remote control doesnt work Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.9) Correct remote operating mode set: TV, VCR etc.?
Install new batteries. (Refer to p.9) Picture appears slowly after switching on This is normal, the image is muted during the TV startup process. Please contact your service center, if the picture has not appeared after five minutes. Select Color in the Video menu and press the G button.
(Refer to p.21) Keep a sufficient distance between the TV and the VCR. No or poor color or poor picture Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.) Horizontal/vertical bars or picture shaking Check for local interference such as an electrical appliance or power tool. No output from one of the speakers Adjust Balance in the AUDIO menu. (Refer to p.23) Unusual sound from inside the TV A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does not indicate a fault with the TV. Owners Manual 45 Maintenance & Specification Maintenance Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1. Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence Absence Extended If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Product Specifications Product Specifications MODEL Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Power requirement Television System Program Coverage External Antenna Impedance Resolution Color Operating Temperature Range Operating Humidity Range Maximum Elevation DU-42PX12XD 41 / 1210 27.5 / 701 3.7 / 96 76.1 / 34.6 AC100-240V ~ 50/60Hz NTSC-M, ATSC VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 125, CADTV 1 ~ 135. DTV 2 ~ 69 75 1024 x 768 (Dot) 16,770,000 (256 steps of each R, G and B) 32 ~ 104F (0 ~ 40C) Less than 80%
6561 feet (2000m) The specifications shown above may be changed without prior notice for quality improvement. 46 Plasma TV
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-01-27 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-01-27
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
DU42PX12XD
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Lab., Inc.
|
||||
1 | Name |
R**** O******
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 42-inch Plasma Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Max. Resolution: 1024 x 768 | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Gumi University EMC Center
|
||||
1 | Name |
T******** P********
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@kumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 19 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC