FCC ID: BEJLSP300 CDMA WLL Phone

LGE CDMA Fixed Wireless Telephone LSP-300 10. Speaker phone This function is a convenient feature which enables you to call using speaker phone button in on-hook state. 11. General Information Main Unit Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size Weight(g) Operating Temperature LSP-300 Digital : 824 ~ 849 MHz Digital : 869 ~ 894 MHz 1.25 MHz Digital : 23.0 dBm Conducted

-104 ~ -25dBm 160 X 215 X 76 (L X W X H) Below 809(with battery, Ni-MH) Below 748 (without battery) 0 ~ 50 AC/DC Adapter Item Input Voltage Input Frequency Output Voltage Battery SMPS Type Description AC 100 ~ 250V / 0.3A, 15W 50 / 60Hz 9.6V(DC), 1A Item Description Capacity Talk duration time Standby duration time Charging duration time 6V Ni-MH 1500mAh 2 Hours 24 Hours Trickle, 24 Hours 42

CDMA Fixed Wireless Telephone User Guide Model: LSP-300 LGE CDMA Fixed Wireless Telephone LSP-300 REVISED HISTORY DATE 2001/02/19 ISSUE ISSUE1 CONTENTS OF CHANGES REMARK Initial Release 3 LGE CDMA Fixed Wireless Telephone LSP-300 Blank Page 4 LGE CDMA Fixed Wireless Telephone LSP-300 CONTENTS Highlights ......................................................................................................................................7 1. Important Information .......................................................................................................8 1.1 Safety Information...........................................................................................................8 1.2 Optimal Phone Performance .........................................................................................8 1.3 Care and Service............................................................................................................9 2. Introduction.......................................................................................................................10 2.1 Front View of the Telephone.........................................................................................10 2.2 LCD Display .................................................................................................................11 2.3 Installation.....................................................................................................................12 2.4 Installation Steps ..........................................................................................................14 3. Basic Operation................................................................................................................15 3.1 Making a Call ................................................................................................................15 3.2 Redialing Last Outgoing Number.................................................................................15 3.3 Receiving a Call............................................................................................................16 3.4 Signal Strength.............................................................................................................16 3.5 Missed Call Message ...................................................................................................16 4. List of Menu State ............................................................................................................17 4.1 Volume / Ring..................................................................................................................17 4.1.1 Ring Volume.........................................................................................................17 4.1.2 Key Volume..........................................................................................................18 4.1.3 Ear Volume ..........................................................................................................18 4.1.4 Ring Type 4.2 Additional Feature.........................................................................................................24 4.2.1 Wake-up time.....................................................................................................19 4.2.2 Minute alert ..........................................................................................................20 4.2.3 Set Rx call mode ..................................................................................................20 4.2.4 SIO baud rate.......................................................................................................20 4.2.5 Own Number ..........................................................................................................2 4.3 Dialing features ..................................................................................................................19 4.4.1 Hot line ...............................................................................................................19 4.4.2 Hot line time.......................................................................................................20 4.4.3 Auto time-out........................................................................................................20 4.4.4 Speed dialing........................................................................................................20 4.4.5 Keytone length .....................................................................................................20 5 LGE CDMA Fixed Wireless Telephone LSP-300 4.5 Security Features............................................................................................................22 4.5.1 Set Lock mode.......................................................................................................23 4.5.2 Clear calls..............................................................................................................23 4.5.3 Clear memory.........................................................................................................23 4.5.4 Emergency call ......................................................................................................23 4.5.5 Restrict call............................................................................................................23 4.5.5.1 Restriction set .....................................................................................................23 4.5.5.2 Permit Memory ..................................................................................................23 4.5.5.3 Deny Memory ....................................................................................................23 4.5.6 New Code 5. Features while in a Call ..................................................................................................25 5.1 Ear Volume...................................................................................................................25 5.2 MIC Volume..................................................................................................................25 5.3 Mute..............................................................................................................................26 5.4 Memo............................................................................................................................26 5.5 Transmitting your own number ....................................................................................26 6. Searching, Editing & Dialing.........................................................................................27 6.1 Retrieving Last Call History..........................................................................................27 6.2 Retrieving Phone Number by Name............................................................................28 6.3 Retrieving Phone Number by Address ........................................................................29 6.4 Retrieving Phone Number by Number.........................................................................29 7. SMS(Short Message Service) .......................................................................................30 7.1 Check & Deleting Received Message..........................................................................30 7.1.1 Text Message........................................................................................................30 7.1.2 Voice Message ..................................................................................................31 7.1.3 Erasing all Received Message..........................................................................31 7.2 MSG Notification tone select........................................................................................32 7.3 Erasing Message..........................................................................................................31 7.4 Message sending .........................................................................................................32 7.3.1 Sending a New Message....................................................................................32 7.3.2 Sending the sent message or message after editing the sent message...........33 7.3.3 Erasing a sent message.....................................................................................34 8. Beside Functions.............................................................................................................35 8.1 Redial ...........................................................................................................................35 8.2 Viewing last call-history................................................................................................35 8.3 Flash.............................................................................................................................35 9. Storing Phone Number ..................................................................................................36 9.1 Storing / Editing Phone Numbers ................................................................................36 9.1.1 Storing Phone Numbers.........................................................................................36 9.1.2 Erasing Stored Phone Numbers..............................................................................37 9.2 Finding Stored Phone Numbers...................................................................................38 10. Speaker phone..................................................................................................................39 11. General information .........................................................................................................39 6 LGE CDMA Fixed Wireless Telephone LSP-300 Highlights Congratulations on your purchase of the LSP-300 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features. The telephone provides:

l 3-line LCD Display with status indicator l A choice of 10 ring sounds l A menu driven interface with prompts for easy operation l Last Number Redial l Speed Dialing with a 99-number memory l Dial tone l ROH (Receiver Off-Hook) tone l Adjustable Ring Volume l Internal Back-up Battery Pack l AC Power Supply l Dipole Antenna l DB9 Data Port for service and repair l Backlingt l Speaker phone 7 LGE CDMA Fixed Wireless Telephone LSP-300 1. 1.1 Safety Information Important Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water. Before installing or operating this product read this information. IMPORTANT 1.2 Optimal Phone Performance l Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may cause the telephone to operate at a higher power level than needed. l For the best call quality, keep the antenna free from obstructions and point the antenna straight up. l Do not use the unit with a damaged antenna. Have your antenna replaced by a qualified technician immediately. Use only a manufacturer-approved antenna. Non-approved antennas, modifications, or attachments could impair call quality, damage the phone. l RF energy may affect improperly installed or inadequately shielded personal medical devices such as pace markers, hospital monitor. Consult the manufacturer of any personal medical devices to determine if they are adequately shielded from external RF energy. Turn your terminal OFF in health care facilities when any regulations posted in the areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. l If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the distance between the radio or television and the telephone.

- Connect the equipment into an outlet on a circuit different from that to which the

- Consult you Authorized LGIC Dealer of an experienced radio/TV technician for help. terminal is connected. l Use only the battery, antenna and AC power supply provided by LGIC. Using any other type will invalidate the warranty. l Only authorized personnel should service the phone and its accessories. Faulty installation or service any be dangerous and may invalidate the warranty. l Do not use the unit in designated no cellular phone use area. l Avoid exposure to high temperature or humidity. l Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off immediately and remove the backup battery and AC power supply. If the unit is inoperable, then return to the service agent for service. l Avoid shock or impact. 8 LGE CDMA Fixed Wireless Telephone LSP-300 l We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. 1.3 Care and Service l Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. l If the unit fails for any reason, do not attempt to disassemble; contact the telephone service provider for assistance. l If any of the following conditions exist; unplug the unit at the wall plug, remove battery, and call the service provider.

- The power supply cord is damaged or frayed.

- Liquid has been spilled into the unit.

- The unit has been exposed to rain or water.

- The unit has been dropped or damaged.

- The unit does not work normally by following the operating instructions. 9 LGE CDMA Fixed Wireless Telephone LSP-300 2. 2.1 Front View of the Telephone Introduction Menu / Softkey 1

: Activate MENU state (also MENU state in the call state) Message End

: Activate SMS state

: Deactivate a STATE No store a value (also activate MUTE state ) Recall / Softkey 2

: Activate RECALL state / Choose NEXT state Navigation Up

() : Shift to a upper state in the MENU state (also Function as a cursor in the EDIT state) Navigation Down() : Shift to a lower state in the MENU state(also Function as a cursor th the EDIT state) Navigation Left () : Volume (also Function as a cursor th the EDIT state) Navigation Right () : Volume (also Function as a cursor th the EDIT state) Clear(Cancel)

: Delete the last digit/dial number(also Exit without storing in the MENU state) 10 LGE CDMA Fixed Wireless Telephone LSP-300

: flash function in the call state Flash Redial : Redial function 2.2 LCD Display The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. 1) RSSI indicator : Indicates the signal strength in the service area. 2) No service : The phone is not receiving system signal. 3) heard. In use : Displayed when call is in progress or the phone is in off-hook and dial tone

: No service : In use 4) Text message : Displayed when a text message is received. 5) Voice message : Displayed when a voice message is received. 6) Alarm : Displayed when wake up alarm time was setting. 7) Caller ID : Displayed when caller ID is received. 8) OUT : Going out. 9) Battery charge level : Indicates charged battery level. 11 LGE CDMA Fixed Wireless Telephone LSP-300 12 LGE CDMA Fixed Wireless Telephone LSP-300 2.3 Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components l Fixed Wireless Terminal is supplied with the following standard unit and accessories;

1. LSP-300 Main Unit with Handset 2. Dipole Antenna 3. Backup Battery 4. User Guide 5. AC/DC Power Adapter 6. Power Cord(Only SMPS Adapter)

-1EA-

-1EA-

-1EA-

-1EA-

-1EA-

-1EA-

l Please make sure that these components are present before you begin the unit installation. And then compare the following figures and components. If components are missing or damage is found, contact the store where you purchased the unit immediately. STEP II. Place the Terminal l Place the terminal on the stable flat secure surface area (desk, table, etc.). Serious damage may result if the unit falls. Do not place the unit on, or within 1 meter of heaters or radiators. This unit is designed for desktop usage. Avoid direct exposure to the sun lights and damp area. l Read the SAFETY INFORMATION located at the first part of this document before you place the terminal STEP III. Connect Components (See the figures in Installation Steps.) l Connect the antenna to the TNC antenna connector located at the top side of the terminal. If you placed the terminal on the flat surface, bend the antenna up right. l Connect curl cord of handset assembly to the RJ-11C port located at the left side of the terminal. l Open the battery case, securely connect the battery cord, place the backup battery pack and close the case. l Connect the AC/DC Adapter cable to the DC input port located at the topside of the terminal.

-. If it is good, beep tone is heard.

-. If it is not good(Booting is fail or beep tone is not heard), you have to connect the adapter or backup battery, again. l Please follow the below to get better voice quality;

1. Keep away from electrical appliances such as TV, computer, radio and so on. 2. Keep terminal in a high and central location with no obstructions, such as metal walls. 3. Raise the integral antenna of terminal to get maximum strength of receive signal as shown figure at the next page. 13 LGE CDMA Fixed Wireless Telephone LSP-300 Handset Connector STEP IV. Check the LCD Display l After you follow the installation instruction step I to step III, please check the LCD for AC Power Supply Connector Antenna TNC Connector normal operation. l If you may not see status of service, please repeat the 5th instruction of step III. And conform Fixed Wireless Telephone to get the proper signal strength from service operator system. The adapter type(with power cord) may be different by country adaptation. 14 LGE CDMA Fixed Wireless Telephone LSP-300 2.4 Installation Steps Please follow the below procedure to install the unit properly. 111 133 155 Connect Base-

handset to the handset connector. Bend the antenna up right. Insert back-up battery in the bottom of the unit.

(give care to polarity) 122 144 166 Connect the antenna to the TNC connector

(Turn right). Open the battery cover at the bottom of the unit. Connect the AC power supply. 15 LGE CDMA Fixed Wireless Telephone LSP-300 Basic Operation 3.1 Making a Call 1. Pick up the handset or press button. 2. Listen for dial tone 3. Enter the phone number with area code if needed. 4. Wait for the Auto Time-out. 1234567 Calling... 1234567 5. The call is connected and you can start conversation. 6. To disconnect the call, replace the handset or press button. 3.2 Redialing Last Outgoing Number 1. Pick up the handset or press button. 2. Listen for dial tone. 3. Press Redial button. The last number that you called will be re-dialed. l Correcting dialing mistakes 1. Press Clear button shortly to erase the most recent digit. 2. Press and hold Clear button for at least one second. l If the phone is locked, enter the Lock Code l If the call did not go through, press the hook switch and dial again. l Flashing / Hook Switch 1. While in the middle of a call, pressing the hook switch for less than 1 second will be treated as a flash. After 1 second, the call will be terminated. 2. Very briefly pressing the hook switch will be ignored. l Battery icon is displayed only when the terminal is operating by battery without AC power. 16 LGE CDMA Fixed Wireless Telephone LSP-300 3.3 Receiving a Call 1. When bell rings, pick up the handset. 2. Start conversation. Incoming Call!

3. To disconnect the call, replace the handset. 3.4 Signal Strength Time: 0:23 MENU

[MUTE]

The quality of calls depends on the signal strength in your area. The stronger the signal, the better the call quality. The signal strength icon indicates the current strength as a number of bars. You can see the antenna and bars according to the strength of received signal in the upper-

left part. 08 May, Sat 10:23 AM MENU RECALL 3.5 Missed Call Message If a call is received and not answered for users absence, You are informed that you have missed a call. The latest missed call time and number of missed call is displayed. Press [OK] to erase Missed call message. Missed 1 call 10:51 AM OK 17 LGE CDMA Fixed Wireless Telephone LSP-300 List of Menu State Main Menu 1. Select Volume 2. Additional 3. Dialing features 4. Security Sub-Menu 1. Ring Volume 2. Key Volume 3. Ear Volume 4. Ring Select -

1. Wake-up time 2 .Minute alert 3.Rx call mode 4.SIO baud rate 5.Own Number 1. Hot Line 2. Hot Line Time 3. Auto time-out 4. Speed Dialing 5. Key tone length 1. Set Lock mode 2. Clear calls 3. Clear memory 4. Emergency call 5. Restrict call 5.1 restrict set 5.2 permit memory 5.3 Deny memory Setting Value 4 steps 4 steps +silent 4 steps 10 types Off/Once/Always Enable/Disable Voice / Fax for next / Always Fax /

Modem for next / Always modem 19200/38400/57600/115200

/230400 Display own number Off/On 2-9 Sec. 2-9 Sec. Enable/Disable normal/Long Never/on power up/Always Enable/Disable No/Yes Local(3.ea) No restriction/restriction

/emergency only Local(10.ea) Local(10.ea) 6. new code Create new lock code Default 18 LGE CDMA Fixed Wireless Telephone LSP-300 4.1 Select Volume This menu allows you to adjust the various different volumes. 4.1.1 Ring Volume The received tone when you receive a call can be adjusted. l From the MENU 1. Press [MENU] + 1(Volume/Ring)+ 1(Ring Volume) in on-hook state. 2. Press Volume button or [NEXT] to adjust ring volume. 3. Press [OK]

l By the Volume button 1. Press Volume button to adjust ring volume in on-hook state MAIN MENU 1:Volume / Ring 2:Additional RING VOLUME OK NEXT 4.1.2 Key Volume The tone when you press a key can be adjusted. 1. Press [MENU] + 1(Volume/Ring) + 2(Key Volume) in on-hook state. 2. Press Volume button or [NEXT] to adjust key volume. KEY VOLUME 3. Press [OK]

4.1.3 Ear Volume OKU NEXT The voice of the other party can be adjusted in on-hook state. 1. Press [MENU] + 1(Volume/Ring) + 3(Ear Volume) in on-hook state. 2. Press Volume button or [NEXT] to adjust ear piece volume 3. Press [OK]

EAR VOLUME OK NEXT

Press Volume button to adjust volume during conversation 19 LGE CDMA Fixed Wireless Telephone LSP-300 4.1.4 Ring Select You can select the various ring types 1. Press [MENU] + 1(Volume/Ring) + 4(Ring Type) in on-hook state. 2. Select a desired ring type with Volume button or

[NEXT].

There are 10 different ring types. RINGER TYPE OK Standar d NEXT

Those are Standard,Option 1,Option 2, Option 3, Option 4, Habanera, Deutsch song, La Primavera, Oh! susanna, Beethoven 3. Press [OK] to save and exit. 4.2 Additional feature 4.2.1 Wake-up Time This function allows you to adjust Wake-up Time. 1. Press [MENU] + 2(ADDITIONAL) + 1(Wake-up Time) In on hook State 2. Select Off, Once or Always by [NEXT] and press [OK]. 3. Press [EDIT] and set the time. 4. Select A.M. or P.M. by [AM/PM]. 5. If you want to modify the wrong time, press Clear button and set again. 6. Press [OK] to save and exit 4.2.2 Minute Alert Alerts you every minute during a call. 1. Press [MENU] + 2(ADDITIONAL) + 2(Minute Alert) In on hook State 20 MAIN MENU 1:VOLUME/RING 2.ADDITIONAL Alarm Time

[OK]

Always

[NEXT]

Wake-up Time _1:23 AM AM/PM OK MINUTE ALERT OK On NEXT LGE CDMA Fixed Wireless Telephone LSP-300 2. Select On or Off by [NEXT] or Volume button. 3. Press [OK] to save and exit 4.2.3 Rx call mode

. 1. Press [MENU] + 2(ADDITIONAL) + 3(RX Call Mode) RX CALL MODE OK voice NEXT in on hook State. 2. Select Voice, Fax for next, Always Fax, Modem for next by Volume or [NEXT] button. 3. Press [OK] to save and exit. 4.2.4 SIO baud rate 1. Press [MENU] + 2(ADDITIONALl) + 4(SIO Baud Rate) in on hook State. 2. Select 19200, 38400, 57600, 115200, 230400 by Volume or [NEXT] button 3. Press [OK] to save and exit DATA BAUDRATE OK 19200 NEXT 4.2.5 own number 1. Press [MENU] + 2(ADDITIONAL) + 5(Own Number) in on hook Sate. 2. Press [OK] to exit 4.3 Dial features 4.3.1 Hot Line 1. Press [MENU] + 3 (DIAL FEATURES) + 1(Hot Line) In on hook State. 2. Select On or Off by [NEXT] or Volume button and press [OK] to select. 21 OWN NUMBER 000-000-0000 OK DIAL FEATURES 1:Hot Line 2:Hot Line Time Hot Line OK On NEXT LGE CDMA Fixed Wireless Telephone LSP-300 3. Press [EDIT] to input Hot Line phone number. 4. Enter the Hot Line phone number 5. Press [OK] to save and exit. 4.3.2 Hot Line Time 119 QUIT

[OK]

U 1. Press [MENU] + 3 (DIAL FEATURES) + 2(Hot Line time) In on hook Sate. 2. Select hot line connection time(2~9 sec.) by [NEXT] or Volume button. Hot Line Time OK 5 sec NEXT 3. Press [OK] to select. 4.3.3 Auto Time-out Setting the length of time the phone waits before automatically dialing a number. You can select this time between 2 and 9 second. 1. Press [MENU] + 3(DIAL FEATURES) + 3(Auto Timeout) In on hook State. 2. Select Auto time-out second between 2 and 9 by [NEXT]

or Volume button. Auto Time-out OK 5 sec NEXT 3. Press [OK] to select. 4.3.4 Speed Dial (enable / disable) 1. Press [MENU] + 3 (DIAL FEATURES) + 4(Speed Dialing) in on hook State. SPEED DIALING 2. Select Enable or Disable by [NEXT] or Volume button and press [OK] to save and exit. OK Enable NEXT This function can be used when the Speed Dial is set to Yes. l Speed Dial Function 1. You can store phone numbers in memory locations (1~99) and place a call. 2. Press the memory number (1 through 99) corresponding to the appropriate memory location, and hold for a few seconds. 22 LGE CDMA Fixed Wireless Telephone LSP-300 4.3.5 Key-tone Length Setting key beep playback length. Possible settings are Normal and Long. 1. Press [MENU] + 3(DIAL FEATURES) + 5(Keytone Length) in on hook State. 2. Select Normal or Long by [NEXT] or Volume button and press [OK] to select. 4.4 secruity 4.4.1 Lock Mode Set DIAL FEATURES 5:KeyTone Length BEEP LENGTH OK normal NEXT This function prevents your phone from being used without permission. Typical default value is 0000. Possible settings are Never, On power up and Always. The Never means that the phone is not locked. On power up locks the phone when the phone is turned on. Always sets the phone locked immediately. 1. Press [MENU] + 4 (SECURITY) 2. Enter your own 4 digit lock code

When this product comes out, the default is 0000. 3. Press 1(Set Lock Mode) 4. Select Off, On power up or Always by [NEXT] or Volume button. 5. Press [OK] to save and exit. 4.4.2 Clear Calls Enter Lock Code!

SECURITY 1:Set Lock Mode 2:Clear Calls SET LOCK OK Never NEXT When a previous outgoing or incoming call history is stored in a memory location, you can erase the all call history. 1. Do the above 1 and 2 steps of 4.4.1. CLEAR CALL STACK 2. Press 2(Clear Calls) 23 OK No NEXT LGE CDMA Fixed Wireless Telephone LSP-300 3. Press [YES] to erase all call history 4.4.3 Clear Memory When you want to delete phonebook memory, you can erase all phonebook memory. 1. Do the above step1 and 2 of 4.4.1. 2. Press 3(Clear Memory). 3. Press [YES] to erase all phone memory. 4.4.4 Emergency Call CLEAR WHOLE BOOK OK No NEXT Even if your phone is locked you can make calls to 3 emergency numbers. 1. Do the above step1 and 2 of 4.4.1. 2. Press 4(Emergency Call) 3. Press [NEXT] or Volume button to choose the number from 1 to 3 4. Press [EDIT]. 5. Enter the emergency phone number 6. Press [OK] to save the number Emergency 1 EDIT

<empty>

NEXT 7. Press [NEXT] or Volume button to edit others or Press End button to exit emergency call process 119 QUIT OK 4.4.5 Restriction Call Service This function is a convenient feature which enables user to restrict using any phone number. To forbid using any phone number, user must set the number in deny edit. Cant use any phone number(max 32digits) started with the number saved in deny edit. If user set the phone number in permit edit, can use any phone number (max 32digits) started with the number even if the phone number is set in deny edit. Ex) example to restrict using the phone number started with 700 . 1. set Restriction in Restrict set menu (function 4.4.6.1) 2. set 700 in deny edit. (function 4.4.6.3) 3. set 700-1234 in permit edit.(function 4.4.6.2) Result : user can use the phone number started with 700-1234. 4.4.5.1 Restrict set No restriction This is a general function which has no any restrictions 24 LGE CDMA Fixed Wireless Telephone LSP-300 Restriction This is a function that you can set permited phone number and denied phone number. Emergency only This is a function which enable you to call only emergency numbers. 1. Press [MENU] and 4(SECURITY ) . 2. Enter a lock code using key pad. 3. Press 5(Restrict Call) and 1(Restrict Set). 4. Select No Restriction , Restriction or Emergency only using [NEXT] or Volume button and press [OK]

MAIN MENU 3:DIAL FEATURES 4:SECURITY Enter Lock Code _----

RESTRICT CALL 1: Restrict Set 2:

Permit memory Restrict Set restrction NEXT OK Below 4.4.5.2 and 4.4.5.3 function can be used when the Restrict set is set to Restriction. 4.4.5.2 Permit memory You can call it if the phone numbers saved in permit edit though they were saved in deny edit. You can save 10 permit phone numbers. 1. Do the above step 1~2 of 4.4.1 5. Press 5(Restrict Call) and 2(Permit Memory). 25 RESTRICT CALL 1: Restrict Set 2:

Permit memory

. LGE CDMA Fixed Wireless Telephone LSP-300 3.Press [EDIT] to edit permit phone number. 4.Enter the permit phone number 5.Press [OK] to save and exit 4.4.5.3 Deny memory You couldnt call any phone numbers saved in deny edit. You can save 10 deny phone numbers. 1. Do the above step 1~2 of 4.4.1 2. Press 5(Restrict Call) and 3(Deny Memory). 2. Press [EDIT] to edit deny number. 4.Enter the deny phone number 5.Press [OK] to save and exit 4.4.6 New Lock Code You can change a new lock code(4digits). 1. Do the above step1 and 2 of 4.4.1. 2. Press 6.(New Code) 3. Enter new lock code and press [OK] to save. Permit 1 700-1234 EDIT NEXT RESTRICT CALL 3: Deny memory Restrict 1 700 NEXT EDIT Enter New code OK QUIT 4. Enter new lock code again to confirm and press [OK] to save. 26 LGE CDMA Fixed Wireless Telephone LSP-300 Functions while in a call 5.1 Ear Volume You may adjust ear volume while you are in a call. The Volume button on the right side of the phone can be used to adjust ear volume. 5.2 MIC Volume Adjusting MIC volume while in a call. 1. Press [MENU] and 2(MIC LEVEL) while in a call. 2. Select Low or High by [NEXT] or Volume button. 3. Press [OK] to save and exit. 27 Time: 0:23 MENU 1234567 MUTE]

EAR VOLUME

[ OK ]

[ NEXT ]

IN_CALL MENU 1:MEMO 2:MIC LEVEL MIC LEVEL OK High NEXT LGE CDMA Fixed Wireless Telephone LSP-300 5.3 Transmitting your own number This function is a convenient feature which enables you to transmit your own phone number while in a call through press one key. (For example, Sending your phone number when you pages.) 1. Press [MENU] and 3(SEND OWNER #) button while in a call. 2. Press [MENU] and 3(Send Owner #) 5.4 Memo You can save numbers while in a call. 1. Press [MENU] and 1(MEMO) while in a call. 2. Enter a number using key pad. 3. Press [ADD] to save and exit. Or press [QUIT] to exit. IN-CALL MENU 3:Send Owner #

IN_CALL MENU 1:MEMO 2:MIC LEVEL 114 QUIT ADD Number Stored In Calls List 5.6 Mute This function prevents your voice from being transmitted but you can call still hear other side. 1. Press [MUTE] button while in a call. 2. You could see MUTE message blinking on the right side of the LCD 3. To release Mute, Press [UNMUTE] button. 28 Time: 0:23 MENU 1234567 MUTE]

Time: 0:23 MUTE MENU 1234567

[UNMUTE]

LGE CDMA Fixed Wireless Telephone LSP-300 Searching, Editing & Dialing 6.1 Retrieving Last Call History 1. Press [RECALL] and 1(FROM LAST CALL) 2. Select a number or a name in the last call list by Up and Down button and press [VIEW]. RECALL MENU 1:FROM LAST CALL 2:FROM MEMORIES 1234567 028507618 VIEW 3. To see more information press [TIME] and press

[SAVE] to save a number in the memory.

Pick up the handset or Press button to make a call with the displayed number. Call to SAVE 028507618 TIME l By pressing [TIME]

Press [OK] to exit l To save a number

Press [SAVE] in step3 6/9 10:14am 0Min 5Sec OK

Enter the name in text mode and press [OK] to save. Press [ABC] to change upper or lower case character.

- To store without name, just press [OK].

- Refer to To enter a character.

Enter a desired memory location (01~99: 2 digits) or press [NEXT] to choose a desired memory location and press [OK]. 028507618 ABC OK ABC auto=01 ??

NEXT OK

- The phone number is stored in the displayed memory location.

The phone will display a message asking to keep your number as secret or not. Select No or Yes using [NEXT]. Then press [OK]. Make it Secret?

No NEXT OK 29

LGE CDMA Fixed Wireless Telephone LSP-300

- You can see a confirming message.

- Also you can see a condition of used memory. 6.2.1 Retrieving Phone Number by Name 1. Press [RECALL] and 2(FROM MEMORIES) 2. Press 1 button to retrieve phone number by name. ABC was stored in 01

- MEMORY -

used : 01 empty : 99 FROM MEMORIES 1:By Name 2:By Address 3. Enter the name that you want to look for and press

[FIND].

At least two letters are recommended for quick search. Lookup name?

ABC FIND

Press [NEXT] or UP and DOWN button to scroll through the list of matches. 01:ADG 02:ACG VIEW ERASE 4. Press [VIEW] to see information in that location.

Pick up handset to make a call.

You can edit the phone number by pressing [EDIT]

button. 01:ADG 028503619 ERASE EDIT 30 LGE CDMA Fixed Wireless Telephone LSP-300 6.2.2 Retrieving Phone Number by Address 1. Press [RECALL] and 2(FROM MEMORIES) 2. Press 2 button to retrieve a phone number by address. 3. Enter a memory address to retrieve phone number.

(ex: If you enter a memory address, 01.) Lookup Location?

FIND

If there is no stored phone number in the memory location, Empty Location is displayed.

If you press [FIND] button without entering number, you see the whole phone number list in the memory Location and you can find the number by scrolling the list. 01:ADG 02:ACG VIEW ERASE 4. Pick up the handset or press button to call to displayed number, press [EDIT] to edit stored information or press [ERASE] to delete displayed information. l Edit process

Modify the phone number by Clear button and keypad. And Press [OK] to edit a related name. 1) Delete the phone number by Clear button. 2) Enter the modified phone number. 3) Press [OK]. 4) To move cursor, use Volume button or *, #. 5) Enter the name. 6) Press [OK]. 01:ADG 028503619 ERASE EDIT

Enter a new memory address to store a new information or choose the new memory address by [NEXT] and press [OK].

Press [OK] to no secret. l Erasing process 31 A 028503619 QUIT OK ERASE ? #02 NO OK NEXT LGE CDMA Fixed Wireless Telephone LSP-300

You might press [ERASE] at the above step 3.

Press [OK] to complete erasing process. 6.4 Retrieving Phone Number by NUMBER 1. Press [RECALL] and 2(FROM MEMEORIES). 2. Press 3 button to retrieve a phone number by number. 3. Enter the phone number that you want to find and press

[FIND] button. Lookup Number?

FIND

If there is no stored phone number in the memory location, No number matches is displayed. 4. Pick up the handset or press button to call to displayed number, press [EDIT] to edit stored information or press [ERASE] to delete displayed information. 01:ADG 02:ACG VIEW ERASE l Edit process. l Erasing process

Do the above step of 6.2.2. 32 LGE CDMA Fixed Wireless Telephone LSP-300 SMS (Short Message Service) Messaging, Paging, and Voice mail features are available when your phone is turned on. Using Message button allows you to access messages for viewing on the LCD screen or to send a message. While viewing a message, you can call back to the number displayed in the message by picking up handset. Check with your WLL service provider regarding the availability of this feature. The information in a message depends on the mode the WLL is operating in and the services capabilities. 7.1 Checking & Deleting Received Message 7.1.1 Text Message 1. Press MESSAGE button and 1(MSG RECEIVED) 2. Press 1(Text MSG) to see a received text message list.

Locate to the desired message in the list.

Mark means already a checked message. 3. Press [VIEW] to see the content of desired message.

You can see the message with received time and callers phone number.

You can read a l message. 4. Press [ERASE] to erase a message.

Press [OK] to complete erasing process. 33 SMS MENU 1:MSG Received 2:MSG Sending RECEIVED MSG 1:Message 2:Voice Mail 01 Hello 02 Good Morning VIEW

[ERASE]

5/21 2:20 PM

< PAGE from >

333333 OK

[ERASE]

333333 Hello!

[OK]

ERASE ?

[ERASE]

No OK

[ NEXT ]

LGE CDMA Fixed Wireless Telephone LSP-300 7.1.2 Voice Message Voice mail notifications indicate the number of new voice mail message in your mail box. Only the most recent voice mail notification will be stored in the WLL phone; previous messages will be overwritten. When a voice mail messages left for you, the WLL phone will alert and display * Voice Mail * . You must call your voice mail service to retrieve these messages. 1. Press MESSAGE button and 1(Received MSG) in idle state. 5/21 2:32 PM

* VOICE MAIL *

2. Press 2(Voice MSG) to check the voice message.

If there is no voice message, No Voice Mail was received is displayed.

Press [ERASE] to delete the voice message. 3. Pick up the phone to make a call to call back your voice mail box if the number of the voice mail box is provided by system. 7.1.3 Erasing all Received Message 1. Press MESSAGE button and 1(MSG RECEIVED). 2. Press 3(Clear All). 3. Press [OK] to delete. 7.2 MSG Notification tone select Volume button. 3. Press [OK] to save and exit. 34 1. Press Message button and 3(MSG NOTIF). 2. Select off, once, Every 2 Min by pressing [NEXT] or 1 < DUPLICATED >

[OK]

[ERASE]

MSG RECEIVED 3:Clear All ERASE All?

[OK]

Yes

[NEXT]

MSG NOTIF

[OK]

Off

[NEXT]

LGE CDMA Fixed Wireless Telephone LSP-300 7.3 Message Sending n 7.3.1 Sending a New Message 1. Press MESSAGE button and 2(MSG SENDING) 2. Press 1(New Message) to send a new message 3. Enter the called number and press [OK]

You can find the called number in the memory by

[FIND] button 4. Enter the call back number and press [OK]

5. Input a message and press [OK] to send Press [A BC] to change upper or lower case character 6. Select Yes/No to store the message. Press [OK] to send SMS MENU 1:MSG Received 2:MSG Sending MSG SENDING 1:New Message 2:Sent Message Called Number OK 1234

[FIND]

Call back Number 5678 OK

<MSG Input>

028503333 abcde ok A/a ABC OK n 7.3.2 Sending the sent Message or message after editing the Sent Message Store Message ?

Yes NEXT OK 1. Press MESSAGE button and 2(MSG SENDING)

. 35 LGE CDMA Fixed Wireless Telephone LSP-300 2. Press 2(Sent Message) to see a received text message list.

Locate to the desired message in the list. 3. Press [EDIT] to edit the content of the selected message.

You can see the selected sent message

Edit the message. Press [ABC] to change upper or lower case character 5. Press [OK] Button. MSG Sending 1:New MSG 2:Sent MSG 01 Hello 02 Good Morning EDIT ERASE

<MSG Input>

028503333 Hello!

A/a ABC ok OK 6. Enter the called Number and press [OK]

7. Enter the call back Number and press [OK]

8. Select Yes/No to store Message. Press [OK] to send the OK OK Called Number 1234

[RECALL]

Call back Number 5678 MSG n 7.3.3 Erasing a Sent Message 1. Press MESSAGE button and 2(MSG SENDING) 36 Store Message?

OK Yes NEXT MSG Sending 1:New Message 2:Sent Message MSG SENDING 3:Clear All LGE CDMA Fixed Wireless Telephone LSP-300 2. Press 3(Clear All) to clear text message list. 3. Press [OK] to erase a message. ERASE ALL ?

OK Yes

[NEXT]

37 LGE CDMA Fixed Wireless Telephone LSP-300 Beside Functions 8.1 Redial number. 8.2 Finding Last Call History Press Redial button in on-hook state to see your last telephone numbers. Pick up the handset or press button and Redial button to redial last outgoing 1234567 028507618 VIEW 8.3 Flash

The same as that of a single line phone 38 LGE CDMA Fixed Wireless Telephone LSP-300 9. Storing Phone Number 9.1 Storing/Editing Phone Numbers 9.1.1 Storing Phone Numbers Frequently used phone numbers can be stored on the memory locations (01~99: 2 digits) and you can make a call by pressing memory location number in off-hook state. 1. Enter the area code and phone number in on-hook state. (Max. 32 digits) 2. Press [SAVE]. 3. Enter the name in text mode and press [OK] to save. lower case Press to change upper or

[ABC]

characters.

To store without name, just press [OK].

Refer to To enter a character. 4. Enter the desired memory location. 021234567 FIND SAVE 021234567 ABC OK

The phone number is stored in the displayed ABC memory location. 5. The phone will display a message asking to keep your number as secret or not. Select No or Yes using

[NEXT]. Then Press [OK].

You can see a confirming message.

Also you can see a condition of used memory. 39 Auto=01 ??

NEXT OK Make it Secret?

No NEXT OK ABC As stored!

in 01

- MEMORY -

used : 01 empty : 99 LGE CDMA Fixed Wireless Telephone LSP-300 l To enter a character. You can enter English character in editing mode. You can enter English character as default, and press Message to select specific character. l To enter English character. Press once a keypad to enter the first letter labeled in the keypad, twice to enter the second letter and 3 times to enter the third letter. EX) To enter L, Press dial button 5 labeled JKL 3 times to enter L.

After 2 seconds entering a character, the cursor is moved to the next position automatically.

Press Volume button to move the cursor.

Press Clear button to erase or correct entered character. l To enter specific character, Press Message to view a desired character while you are entering names.

Special characters includes *, #, %, , :, +, <, >, =, and more

Press the number next to the character you want insert. 9.1.2 Erasing Stored Phone Numbers When a phone number is stored in a memory location, you can erase the stored phone number. 1. Press [RECALL] + 2(FROM MEMORIES) + 3(By Number) and enter a number of the desired memory location to erase. Lookup Number?

If there is no stored phone number in the memory location, Empty Location is displayed. 01:ADG 02:ACG VIEW FIND ERASE

If you do not remember the memory location to erase, press [FIND] to search phone number by memory location 40 LGE CDMA Fixed Wireless Telephone LSP-300 2. Erasing process

Press [ERASE] to delete.

Press [OK] to complete erasing process. 9.2 Finding Stored Phone Numbers Erase? #01 Yes NEXT OK

- ERASED -

You can see all the list of stored phone numbers in memory list and if you forgot the memory location, can find it in sequence. And You can place a call with the phone number. 1. Press [RECALL] + 2(FROM MEMEORIES) +3(By Number) in on-hook state. Lookup Number?

FIND 2. Press [FIND] button to find the desired phone number.

Locate in the desired name or address to find.

If not any entered name, phone number is displayed. 01:ADG 02:ACG VIEW ERASE 3. Press [VIEW] to see the stored number. 4. To make a call with the phone number in the state of step 2 or step 3, pick up the handset or press button and wait for Auto Time-out. 01:ADG 028503619 ERASE EDIT 41 LGE CDMA Fixed Wireless Telephone LSP-300 10. Speaker phone This function is a convenient feature which enables you to call using speaker phone button in on-hook state. 11. General Information Main Unit Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size Weight(g) Operating Temperature LSP-300 Digital : 824 ~ 849 MHz Digital : 869 ~ 894 MHz 1.25 MHz Digital : Max. 0.31W

-104 ~ -25dBm 160 X 215 X 76 (L X W X H) Below 809(with battery, Ni-MH) Below 748 (without battery) 0 ~ 50 AC/DC Adapter Item Input Voltage Input Frequency Output Voltage Battery SMPS Type Description AC 100 ~ 250V / 0.3A, 15W 50 / 60Hz 9.6V(DC), 1A Item Description Capacity Talk duration time Standby duration time Charging duration time 6V Ni-MH 1500mAh 2 Hours 24 Hours Trickle, 24 Hours 42 LGE CDMA Fixed Wireless Telephone LSP-300 Licensed by QUALCOMM Incorporated under one or more of the following Patents:

U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No. 5,107,225 43