FCC ID: BEJKP260D Cellular/ PCS GSM Phone with Bluetooth

ENGLISH KP260d USER GUIDE This document is the user guide for the LG KP260d Mobile Phone. All rights for this document are reserved by LG Electronics. Copying, modifying and distributing this document without the consent of LG Electronics are prohibited. Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. "

Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio/TV technician for help. LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS:

LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions:

(1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product.

(2) The limited warranty extends on to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user.

(3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S., including Alaska, Hawaii, U.S. Territories and Canada.

(4) The external housing and cosmetic parts shall not be covered under these limited warranty terms.

(5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase.

(6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty. 2. WHAT THIS WARRANTY DOES NOT COVER:

(1) Defects or damages resulting from use of the product in other than its normal and customary manner.

(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping blown fuses spills of food or liquid.

(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.

(4) That the Customer Service Department at LG was net notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period.

(5) Products which have had the serial number removed or made illegible.

(6) The limited warranty is in lieu of all other warranties, express or implied either in fact or by operations law, statutory or otherwise, including, but limited to any implied warranty of marketability or fitness for a particular use.

(7) Damage resulting from use of non-LG approved accessories.

(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use.

(9) Products operated outside published maximum ratings. 3

(10) Products used or obtained in a rental program.

(11) Consumables (such as fuses). 3. STATE LAW RIGHTS:

No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, RISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of imitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE:

To obtain warranty service, please call the following web address:

www.lgeservice.com For Your Safety Important Information This user guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Before You Start Safety Instructions WARNING! To reduce the possibility of electric shock, do not expose your phone to high humidity areas, such as the bathroom, swimming pool, etc. Always store your phone away from heat. Never store your phone in settings that may expose it to temperatures less than 32F or greater than 104F, such as outside during extreme weather conditions or in your car on a hot day. Exposure to excessive cold or heat will result in malfunction, damage and/or catastrophic failure. Be careful when using your phone near other electronic devices. RF emissions from your mobile phone may affect nearby in adequately shielded electronic equipment. You should consult with manufacturers of any personal medical devices such as pacemakers and hearing aides to determine if they are susceptible to interference from your mobile phone. 8 Turn off your phone in a medical facility or at a gas station. Never place your phone in a microwave oven as this will cause the battery to explode. IMPORTANT! Please read the TIA SAFETY INFORMATION on page 78 before using your phone. Safety Information Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

] Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

] Never place your phone in a microwave oven as it will cause the battery to explode.

] Do not dispose of your battery by fire or with hazardous or flammable materials.

] Make sure that no sharp-edged items come into contact with the battery. There is a risk of this causing a fire.

] Store the battery in a place out of reach of children.

] Be careful that children do not swallow any parts such as rubber plugs (earphone, connection parts of the phone, etc.). This could cause asphyxiation or suffocation. For Your Safety

] Unplug the power cord and charger during lightning storms

] Do not place any heavy items on the power cord. Do not to avoid electric shock or fire.

] When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.

] Do not use a hand-held phone while driving.

] Do not use the phone in areas where its use is prohibited.

(For example: aircraft).

] Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

] Never store your phone in temperatures less than- 4F or greater than 122F.

] Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire.

] Do not drop, strike, or shake your phone severely. Such actions may harm the internal circuit boards of the phone.

] Do not use your phone in high explosive areas as the phone may generate sparks.

] Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock. allow the power cord to be crimped as it may cause fire or electric shock.

] Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

] Do not disassemble the phone.

] Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

] Only use the batteries, antennas, and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

] Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

] Do not hold or let the antenna come in contact with your body during a call.

] An emergency call can be made only within a service area. For an emergency call, make sure that you are within a service area and that the phone is turned on. 9 Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 0.79 inches (2cm) between the users body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79 inches(2cm) must be maintained between the user's body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain 0.79 inches(2cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided. For Your Safety FCC RF Exposure Information WARNING! Read this information before operating the phone. In August 1996, the Federal Communications (FCC) of he United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. CAUTION Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement antenna. 10 Vehicle Mounted External Antenna

(optional, if available) A minimum separation distance of 8 inches (20cm) must be maintained between the user/bystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov FCC Part 15 Class B Compliance This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions:

(1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation. Cautions for Battery

] Do not disassemble.

] Do not short-circuit.

] Do not expose to high temperature: 60C (140F).]

] Do not incinerate. For Your Safety Battery Disposal

] Please dispose of your battery properly or bring to your local wireless carrier for recycling.

] Do not dispose in fire or with hazardous or flammable materials. Adapter (Charger) Cautions

] Using the wrong battery charger could damage your phone and void your warranty.

] The adapter or battery charger is intended for indoor use only. Do not expose the adapter or battery charger to direct sunlight or use it in places with high humidity, such as the bathroom. 11 General Functions Making and answering calls Making a call 1. Make sure your phone is powered on. 2. Enter a phone number including the area code. Press and hold the key to erase the entire number. 3. Press the 4. To end the call, press the key to make the call. key. Making a call from the call history list 1. In standby mode, press the key, and the latest incoming, outgoing and missed phone numbers will be displayed. 2. Select the desired number by using the up/down navigation key. 3. Press the key. Making an international call 1. Press and hold the international prefix. The + character automatically selects the international access code. key for the 2. Enter the country code, area code, and the phone number. 3. Press the key. Ending a call When you have finished your call, press the key. Making a call from the Contacts You can save the names and phone numbers dialed frequently in the SIM card as well as the phone memory known as the contacts list. You can dial a number by simply looking up the desired name in the contacts. G e n e r a l F u n c t i o n s 15 General Functions Answering a call When you receive a call, the phone rings and the flashing phone icon appears on the screen. To identify the caller, the callers phone number

(or name if saved in the contacts) is displayed. 1. To answer an incoming call, open the phone when Flip open has been set as the answer mode. You can change the answer mode what you want by using the Answer mode feature. Note If the Any key has been set as the answer mode, any key press will answer a call except for the or the right soft key. key To reject an incoming call, press and hold one of the side keys on the left side of the phone without opening the flip. You can answer a call while using the Contacts or other menu features. G e n e r a l F u n c t i o n s 16 2. To end the call, close the phone or press the key. Signal strength You can check the strength of your signal by the signal indicator (

on the LCD screen of your phone. Signal strength can vary, particularly inside buildings. Moving near to a window may improve reception.

) Entering text You can enter alphanumeric characters by using the phones keypad. For example, storing names in the contacts, writing a message, creating a personal greeting. The following text input methods are available in the phone. T9 (T9 Abc) mode This mode lets you enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode. This is sometimes known as predictive text. ABC mode This mode lets you enter letters by pressing the key labeled with the required letter once, twice, three or four times until the letter is displayed. 123 mode (Number mode) Type numbers using one keystroke per number. To change to 123 mode in a text entry field, press the key until 123 mode is displayed. Changing the text input mode 1. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the lower right corner of the LCD screen. 2. Change the text input mode by key. You can pressing the check the current text input mode in the lower right corner of the LCD screen. Using the T9 mode The T9 predictive text input mode lets you enter words easily with a minimum number of key presses. As you press each key, the phone begins to display the characters that it thinks you are typing based on the built-in dictionary. You can also add new words in the dictionary. As new words are added, the word changes to reflect the most likely candidate from the dictionary. G e n e r a l F u n c t i o n s 17 General Functions G e n e r a l F u n c t i o n s 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys Press one key per letter. to

. The word changes as letters are typed. Ignore whats on the screen until the word is typed completely. If the word is still incorrect after typing completely, press the key once or more or press the down navigation key to cycle through the other word options. Example Press Good to type If the desired word is missing from the word choice list, add it as a new T9 word, using the ABC mode. You can select the language of the T9 mode. Press the left soft key

[Option], then select T9 languages. Select the desired language of T9 mode. You can also turn off the T9 mode by selecting T9 off. The default setting on the phone is T9 enabled mode. 18 2. Enter the whole word before editing or deleting any keystrokes. 3. Complete each word with a space key. To delete key. Press and by pressing the letters, press the hold down the entire words. key to erase Note To exit from the text input mode, press the back to standby mode and the edited message gets stored in drafts. key. The phone goes Using the ABC mode Use the your text. 1. Press the key labeled with the keys to enter to required letter:

Once for the first letter Twice for the second letter And so on 2. To insert a space, press the right or navigation key To delete letters, press the Press and hold down the to clear the whole text. key once. key. key Note Refer to the table below for more information on the characters available using the alphanumeric keys. Key Characters in the order display Lower Case Upper case

. , / ? ! - : 1 a b c 2 d e f 3 g h i 4 j k l 5

. , / ? ! - : 1 A B C 2 D E F 3 G H I 4 J K L 5 M N O 6 m n o 6 P Q R S 7 T U V 8 W X Y Z 9 Space, 0 p q r s 7 t u v 8 w x y z 9 Space, 0 Note The characters assigned to the keys and their order of appearance depends upon the language selected using the option Input method. The table above provides the characters set for English language. G e n e r a l F u n c t i o n s Using the 123 (Number) mode The 123 mode enables you to enter numbers in a text message (a telephone number, for example). Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode. Using the symbol mode The symbol mode enables you to enter various symbols or special characters. To enter a symbol, select Options Insert Symbol. Use the navigation and numeric keys to select the desired symbol and press the OK key. 19 In-call menu Your phone provides a number of control functions that you can use during a call. To access these functions during a call, press the left soft key

[Options]. During a call The menu displayed on the handset screen during a call is different than the default main menu displayed when in idle screen, and the options are described below. Making a Second Call

(Network Dependent) You can search and dial the number from Contacts to make a second call. Swapping Between Two Calls To switch between two calls, press the key or the left soft key, and then select Swap Call. I n

c a l l m e n u 20 Answering an Incoming Call To answer an incoming call when the handset is ringing, simply press the key. The handset is also able to warn you of an incoming call while you are already on a call. A tone sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call waiting, is only available if your network supports it. For details of how to activate and deactivate it see Call waiting feature. If Call waiting is on, you can put the first call on hold and answer the second, by pressing the left soft key. Rejecting an Incoming Call You can reject an incoming call without answering by simply pressing the During a call, you can reject an incoming call by pressing the key. key. Muting the Microphone You can mute the microphone during a call by pressing the right soft key [Mute]. The handset can be unmuted by pressing the right soft key [Unmute]. When the handset is muted, the caller cannot hear you, but you can still hear them. DTMF tones while calling To switch on DTMF tones while calling (e.g. to use the phone with an automatic switchboard) press the left soft key [Options] followed by Enable DTMF. Select Disable DTMF to disable DTMF tones. DTMF tones are normally on. Conference Calls The conference service provides you with the ability to have a simultaneous conversation with more than one caller, if your network service provider supports this feature. A conference call can only be set up when you have one active call and one call on hold, both calls having been answered. Once a conference call is set up, calls may be added, disconnected or separated (that is, removed from the conference call but still connected to you) by the person who set up the conference call. These options are all available from the In-Call menu. The maximum callers in a conference call are five. Once started, you are in control of the conference call, and only you can add calls to the conference call. Making a Second Call You can make a second call while currently in call. Enter the second number and press the When the second call is connected, the first call is automatically placed on hold. You can swap between calls, by pressing the key. key. I n

c a l l m e n u 21 Private Call in a Conference Call To have a private call with one caller from a conference call, display the number of the caller you wish to talk to on the screen, then press the left soft key. Select the Private menu of Conference call to put all the other callers on hold. Ending a Conference Call Currently displayed caller from a conference call can be disconnected by pressing the key. In-call menu I n

c a l l m e n u Setting Up a Conference Call To set up a conference call, place one call on hold and while the active call is on, press the left soft key and then select the Join menu of Conference call. Activate the Conference Call on Hold To activate a conference call on hold, key. Alternatively press press the the left soft key [Options] and select Join all/Hold all calls. Other users on hold will stay connected. To return to conference call mode, press the left soft key [Options] followed by Conference call. Adding Calls to the Conference Call To add a call to an existing conference call, press the left soft key, and then select the Join menu of Conference call. 22 Menu Tree The menu in this phone can be displayed in 2 ways. One is by grid view or secondly by list view. Please note that menu number options are different in each view. The default setting on the phone is set to show the menu in grid view, so therefore all the menu number selections throughout the manual are shown according to that setting. You can go to the desired menu using the left soft key [Menu], navigation keys and the OK key. And you can also take a shortcut by pressing the corresponding number key of desired menu after pressing the left soft key [Menu]. M e n u T r e e 1. SIM Services 2. Call register 2.1 All calls 2.2 Missed calls 2.3 Dialed calls 2.4 Received calls 2.5 GPRS information 2.6 Call duration 3. Organizer 3.1 Calendar 3.2 Memo 3.3 To-do 4. Multimedia 4.1 Camera 4.2 Video camera 4.3 Voice recorder 5. Messages 5.1 New message 5.2 Inbox 5.3 Email box 5.4 Drafts 5.5 Outbox 5.6 Sent 5.7 Listen voice mail 5.8 Info service 5.9 Templates 5.0 Settings 23 Menu Tree 6. My stu 6.1 Images 6.2 Sounds 6.3 Videos 6.4 Others 6.5 Games & Apps 6.6 External Memory 7. Pro les 7.1 General 7.2 Silent 7.3 Vibrate only 7.4 Outdoor 7.5 Headset 8. Contacts 8.1 Search 8.2 Add new 8.3 Speed dial 8.4 Caller groups 8.5 Copy all 8.6 Delete all 8.7 Settings 8.8 Information 9. Fun & Tools 9.1 Favorites 9.2 Alarm clock 9.3 Calculator 9.4 Stopwatch 9.5 Unit converter 9.6 World time M e n u T r e e 24

. Browser

.1 Home

.2 Bookmarks

.3 Enter address

.4 History

.5 Saved pages

.6 Settings

.7 Information 0. MP3 player 0.1 All songs 0.2 My playlist 0.3 Settings

#. Settings

#.1 Date & Time

#.2 Languages

#.3 Display settings

#.4 Connectivity

#.5 Calls

#.6 Security

#.7 Flight mode

#.8 Power save

#.9 Master reset

#.0 Memory status SIM Services [Menu 1]

With the SIM services menu your phone is future-proof and will support additions to your service providers service. For more information contact your service provider. S I M S e r v i c e s 25 Call register [Menu 2]

You can check the record of missed, received, and dialed calls only if the network supports the Calling Line Identification (CLI) within the service area. The number and name (if available) are displayed together with the date and time at which the call was made. You can also view the number of times you have called. All calls You can view all lists of outgoing or incoming calls. Menu 2.1 Menu 2.2 Missed calls Allows you to view missed call records, make a call, send a message, and save the number in the contacts. Menu 2.3 Dialed calls Allows you to view dialed call records, make a call, send a message, and save the number in the contacts. Received calls Menu 2.4 Allows you to view received call records, make a call, send a message, and save the number in the contacts. Menu 2.5 GPRS information You can check the amount of data transferred over the network through the GPRS information option. In addition, you can also view how much time you are online. C a l l r e g i s t e r 26 Menu 2.6 Call duration Allows you to view the duration of your incoming and outgoing calls. You can also reset the call timers. The following timers are available:

Last call: Length of the last call. All calls: Total length of all calls made and incoming calls since the timer was last reset. Dialed calls: Length of the outgoing calls. Received calls: Length of the incoming calls. C a l l r e g i s t e r 27 Organizer [Menu 3]

O r g a n i z e r Menu 3.1 Calendar You can refer to your schedule by months. The cursor is on the current date, and the registered date is marked. Each press of skips back a year. skips forward a year. moves to today. skips back a month. skips forward a month. You can enter a schedule or memo in the scheduler by pressing the left soft key [Options]. View daily schedules: You can view the schedule note or memo for the chosen day. All new: Select this to enter a new schedule or memo. Set alarm tone: You can set the scheduler tone. All schedules: You can see all the schedules. Go to date: You can go the chosen date directly. Delete old: Select this to delete the expired schedule notes that you have already been notified of. Delete all: Select this to delete all the schedule notes and memos. Menu 3.2 Memo You can add new memo, view and manage saved memos. 1. If the entry is empty, press the left soft key [New] and enter the contents of the memo. You can save the memo to the list by the left soft key [Options] then choose [Save]. 2. If you have saved memos, you can access following options with the left soft key [Options] : View, Delete, New memo, Send via, Edit, Multi delete, Delete all. Note If you want to change the text input mode, press the key in order. 28 Menu 3.3 To-do You can view, edit and add tasks to do. Tasks are displayed in time order. Tasks that have been completed or not completed are displayed in different ways. 1. If the entry is empty, press the left soft key [New]. 2. Input the Due date, Note, Priority, and Status. 3. When you have finished entering the data, press the left soft key

[Save]. 4. You can manage saved to do notes by pressing the left soft key

[Options]. O r g a n i z e r 29 Multimedia [Menu 4]

You can enjoy your multimedia function such as camera, video camera, voice recorder for your fun and convenience. Note When the status of the battery indicates low, you may not be able to use Camera or Multimedia function. While using Multimedia function, the status of the battery is changeable. Menu 4.1 Camera Using the camera module built in your phone, you can take pictures of people. Additionally, you can send photos to other people and select photos as wallpaper. Note When using the camera, power consumption increases. If the battery is too low, you may not be able to use the Camera feature, please recharge the battery before use. M u l t i m e d i a 30

, camera side key Shutter sound or video recording sound is emitted even when setting mode, including silent mode. To take a picture

- To take clear pictures, press the camera hot key

(only when flip is closed) or OK key while holding the camera without any movement.

- Appropriately adjust distance to the object that you want take a picture of (more than 50 cm).

- Handle carefully since the camera is vulnerable to shock and use a soft cloth when cleaning the camera lens.

- Do not disassemble or modify the camera as this may lead to fire or malfunctioning. 1. Press the camera key in standby mode. 2. Focus on the subject to capture the image, and then press the camera key or the OK key. Before take a photo, you can set the following options by pressing the left soft key [Options]. Resolution: Allows you to set the image size. (320x240/640x480) Quality: Allows you to set the image quality from Normal, Fine and Super fine. Timer: Allows you to select the delay time (Off/3 Secs/5 Secs/10 Secs). Then the phone takes a photo after the specified time. View mode: You can set the view mode. (Full image/Full screen) Save to: You can set the save option for a picture. (Phone/

External) Multi shot: Allows to take multishot-photos successively. Color effect: 4 settings are available. (Off/Sepia/Mono/

Negative) White balance: Allows you to change the settings according to the environment. (Auto/Daylight/

Incandescent/Cloudy/Fluorescent) Shutter tone: You can set the sound when taking a picture. Reset settings: Allows you to reset the settings. M u l t i m e d i a Note You can adjust the brightness by using the

. The zoom function varies depending on the resolution the camera is set to. For example, if the camera resolution is set to the highest setting you cant zoom. 3. The photo you have taken and saved is automatically saved in the Images folder of My stuff. After taking a photo, you can select the submenus by pressing the left soft key [Options]. 31 Multimedia New photo: You can take a new Quality: Allows you to set the photo. Set as: You can set the taken photo as a Wallpaper or Picture ID. Send via: You can send the photo via Multimedia message or E-mail. Album: You can access the Images folder of My stuff. Video camera Menu 4.2 You can record and save a video clip. 1. To start recording press the OK key. As soon as it starts to record a timer will be displayed. Before record a video clip, you can set the following options by pressing the left soft key [Options]. Video mode: Allows you to set the mode to MMS or General. MMS mode resticts the video file to MMS size. image quality from Normal, Fine and Super fine. Save to: You can set the save option for a video clip. (Phone/

External) Color effect: 4 settings are available. (Off/Sepia/Mono/

Negative) White balance: Allows you to change the settings according to the environment. (Auto/Daylight/

Incandescent/Cloudy/Fluorescent) Reset settings: Allows you to reset the settings. 2. Press the left soft key [Stop] to end the recording. 3. The video clip you recorded is automatically saved in the Videos folder of My stuff. After recording a video, you can select the submenus by pressing the left soft key

[Options]. Resolution: Allows you to set the New: You can record a new video. size. (128X96/176X144) M u l t i m e d i a 32 Send via: You can send the voice memo via Multimedia message or E-mail. Album: You can access the Sounds folder of My stuff. M u l t i m e d i a Play: You can play the recorded video clip. Send via: You can send the photo via Multimedia message or E-mail. Album: You can access the Videos folder of My stuff. Voice recorder Menu 4.3 You can record a voice memo. 1. Press the OK key to start recording. Once recording is started, the message REC and the recording time are displayed, talk into the microphone. 2. If you want to finish recording, press the right soft key [Stop]. The recorded file is automatically saved in Sounds folder of My stuff. 3. If you press the left soft key

[Options], you can select the submenus as follow:

New voice record: You can start a new voice recording. 33 Messages [Menu 5]

M e s s a g e s New message Menu 5.1 This menu includes functions related to SMS (Short Message Service), MMS (Multimedia Message Service), E-mail, as well as the networks service messages. Text

(Menu 5.1.1) You can write and edit text message. 1. Enter the New message menu by pressing the left soft key [OK]. 2. If you want to write a new message, select Text. 3. To make text input easier, use T9. 4. Press the left soft key [Options] to attach the following. Options Send to: Sends text messages. 1. Enter numbers of recipient. 2. Press the down navigation key to add more recipients. 3. You can add phone numbers in the contacts. 34 4. Press the left soft key [Options] and then select Send after entering numbers. The message will automatically be saved in the Sent folder. If the message has not been sent, it will remain in the Outbox with a failed status. Insert

- Symbol: You can add special characters.

- Image: You can insert the default graphics or graphics in the Images folder that are available for short messages.

- Sound: You can insert sounds that are available for short messages.

- Text template: You can use Text templates already set in the phone.

- Contacts: You can add phone numbers or email addresses in the contacts.

- Business card: You can add your business card to the message. Save to drafts: Stores messages in Drafts. T9 languages: Select the language for T9 input mode. You can also deactivate T9 input mode by selecting T9 off. New T9 word: Select the New T9 word for inputting new word into the dictionary. Clear text: You can clear text while writing SMS. Exit: If you select Exit while writing a message, you can end the writing message and back to the Messaging menu. The message you have written is not saved.

(Menu 5.1.2) Multimedia You can create a new message or choose one of the multimedia message templates already made. Maximum available file size, that can be inserted to multimedia message, is 300 kb. Options Send to: You can send multimedia messages to multiple recipients, priorities your message, and make it sent later as well. Insert: You can add the following:

Symbol, Image, Video, Sound, New photo, New video, New sound, New slide, Text template, and Others (Contact, Business card, Schedule, Note, To-do). Preview: You can preview multimedia messages you have created. (This item is only available when some files have been attached.) Save: You can save multimedia messages to drafts or multimedia templates. Edit subject: Allows you to modify the multimedia message you have chosen. M e s s a g e s 35 Messages Delete slide: You can delete the desired slide. Slide duration: You can set the duration of slide of multimedia message. T9 languages: Select the language for T9 input mode. You can also deactivate T9 input mode by selecting T9 off. New T9 word: Select the New T9 word for inputting new word into the dictionary. Exit: You can get back to the Messaging menu. Note If you select the picture (200K) on writing multimedia message, loading duration will take around 10 seconds at least. Furthermore, you cant activate any key during loading time. After 10 seconds, it is available to write multimedia message. E-mail

(Menu 5.1.3) To send/receive an e-mail, you should set up the e-mail account. 1. Key in the subject of the e-mail and press the OK key. 2. After writing an e-mail message, press the left soft key [Options]. You can access the following option menus. Send to: Enter the e-mail address or select the e-mail address from the contacts. Insert: You can add Symbol/Text template/Contact/Business card. Attachment: You can add the following: Image/Video/Sound/

New photo/New video/New sound/Contact/Business card/

Schedule/Memo/To-do/Others. Preview: You can preview e-mail you wrote. Save to drafts: Select this to save the message in the Drafts. M e s s a g e s 36 Note Enter the reference e-mail address to forward the e-mail in Cc (Carbon copy) field. Enter a hidden reference e-mail address to forward the e-mail without forwarding information in Bcc (Blind Carbon Copy) field. Only valid e-mail addresses are allowed for the recipient (To), reference address (Cc) and hidden reference address (Bcc) fields. When an e-mail address has been specified, another field where you can specify another address appears. You can specify up to 20 recipients for the To, Cc, Bcc address fields. Edit subject: You can edit the subject. T9 language: Select the language for T9 input mode. You can also deactivate T9 input mode by selecting T9 off. New T9 word: Select the New T9 word for inputting new word into the dictionary. Clear text: Allows you to delete all the text within the e-mail. Exit: If you select Exit while writing a message, you can end the writing message and back to the Messaging menu. The message you have written is not saved. 3. When you have finished writing an email, press the left soft key and select Send to. 4. Enter the email address of the recipients. You can search the contacts by pressing the left soft key [Options]. 5. Press the left soft key [Options] and select Send to send the e-mail. M e s s a g e s 37 Messages Menu 5.2 Inbox You will be alerted when you have received messages. They will be stored in Inbox. You can save SMS up to 110(SMS: 100, Delivery report: 10). If the phone shows No space for SIM message, you have to delete only SIM messages from Inbox. If the phone displays No space for message, you can make space of each repository as deleting messages, media and applications. SIM message SIM message means the message exceptionally stored in SIM card. You can move this message to the phone. For notified multimedia message, you have to wait for downloading and processing of the message. To read a message, select one of the messages by pressing the left soft key

[Options]. The following options are available. View: You can view the received messages. Reply: You can reply to the sender. Delete: You can delete the current message. Forward: You can forward the selected message to another party. Return call: You can call back to the sender. Number: You can save the senders phone number in the contacts. Information: You can view information about received messages. Multi delete: After selecting the messages you want to remove, you can delete the selected messages. Delete all read: You can delete all messages read. Delete all: You can delete all messages. M e s s a g e s 38 Menu 5.3 Email box When you access this menu, you can either connect to your remote mailbox to retrieve your new e-mail messages, or you can view the previously retrieved e-mail messages without logging in to the e-mail server. Menu 5.4 Drafts Using this menu, you can preset multimedia messages that you use most frequently. This menu shows the preset multimedia message list. The following options are available. View: You can see the multimedia messages. Edit: Modifies the message you choose. Delete: Deletes the message you choose. Information: You can view information about the message you choose. Multi delete: After selecting the messages you want to remove, press the OK key and you can delete the selected messages. Delete all: Deletes all of the messages in the folder. M e s s a g e s Menu 5.5 Outbox You can view the list and contents of sending/resending/waiting messages in this menu and can also verify if the transmission was successful. After sending the message successfully, the message will be moved to sent box. The following options are available. View: You can view the message. Delete: You can delete the message. Resend: You can resend the selected message. Edit: Modifies the message you choose. 39 Messages Information: You can check information of each message. Multi delete: Select and delete the selected messages. Delete all: You can delete all messages in the folder. Menu 5.6 Sent This menu allows you to view the messages which are already sent. You can check the time and the contents of message. Menu 5.7 Listen voice mail This menu provides you with a quick way of accessing your voice mailbox

(if provided by your network). Before using this feature, you must enter the voice server number obtained from your network operator. Once this menu has been selected, simply press the left soft key [OK] to listen to voice mail. You can also hold key in standby mode down the to listen to voicemail. M e s s a g e s 40 Note When you receive a voicemail, your phone displays the icon and you hear an alert. Please check with your network provider for details of their service in order to configure the handset correctly. Info service

(Dependent to network and subscription) Menu 5.8 Info service messages are text messages delivered by the network to GSM. They provide general information such as weather reports, traffic news, taxis, pharmacies, and stock prices. Each network has its own number;

therefore, you can contact service provider to input the certain number for the information. When you have received an info service message, you can see the popup message to show you that you have received a message or the info service message is directly displayed. To view the message again or not in standby mode, follow the sequence shown below;

(Menu 5.8.1) Read 1. When you have received an info service message and select Read to view the message, it will be displayed on the screen. You can read another message by scrolling the left or right navigation key. 2. The message will be shown until another message is reached. Topics

(Menu 5.8.2)

(Dependent to network and subscription) You can see info service message numbers which you added. If you press the left soft key [Options], you can edit and delete info message category which you added. You can select info service message numbers in the active list. if you activate an info service number, you can receive messages sent from the number. M e s s a g e s Templates Menu 5.9 Text

(Menu 5.9.1) You have 6 text templates as below;

Please call me back. Im late. I will be there at Where are you now?

I am on the way. Urgent! Please, contact I love you. The following options are available. View: You can see selected templates. Edit: Use this to write a new message or edit the selected template message from the text template list. 41 Messages Send via M e s s a g e s

- Text message: Use this to send the selected template message by SMS.

- Multimedia message: Use this to send the selected template message by MMS. Send: Use this to send the multimedia template message by MMS. Delete: Deletes the multimedia template. New template: Use this to create a new template. Delete: Deletes the template. Add new: Use this to create a new Delete all: Allows you to delete all multimedia messages. template. Delete all: Allows you to delete all template messages.

(Menu 5.9.2) Multimedia You can save a new multimedia template and edit the saved multimedia templates. After saving new template, you can use the following options. View: You can see multimedia templates. Edit: Use this to write a new message or edit the selected multimedia template message from the multimedia template list. Settings Text message Message type:

Menu 5.0

(Menu 5.0.1) Text, Voice, Fax, National paging, X.400, E-mail, ERMES Usually, the type of message is set to Text. You can convert your text into alternative formats. Contact your service provider for the availability of this function. Validity period: This network service allows you to set how long your messages will be stored at the message centre. 42 Delivery report: If you set to Priority: You can set the priority of Yes, you can check whether your message is sent successfully. Reply via same service center:

When a message is sent, it allows the recipients to reply and charge the cost of the reply to your telephone bill. SMS Center: If you want to send the text message, you can receive the address of SMS centre through this menu. Multimedia message

(Menu 5.0.2) Subject: You can enter multimedia messages subject when this menu is on. Slide Duration: Displays the duration of each page when writing the message. the message you choose. Validity period: This network service allows you to set how long your text messages will be stored at the message centre. Delivery report: If it is set to Yes in this menu, you can check whether your message is sent successfully. Read report: You can receive the report whether the receiver read the message or not. Auto download: If you select On, you receive multimedia messages automatically. If you select Off, you receive only notification message in the inbox and then you can check this notification. If you select Home network only, how you receive multimedia messages depends on Home network. Network profile: If you select multimedia message server, you can set the URL for multimedia message server. M e s s a g e s 43 Messages M e s s a g e s Permitted message type

- Personal: Personal message.

- Advertisements: Commercial message.

- Information: Necessary information. E-mail You can configure settings for receiving and transmitting e-mail.

(Menu 5.0.3) Email account (Menu 5.0.3.1) 1. Select New from the Email account menu options. 2. The following items need to be configured.

- Account name: You can edit the e-mail account name.

- Email address: Enter the e-mail address given to you by your service provider.

- My name: Enter a user name.

- Incoming mail server: Enter the POP3 or IMAP4 address that receives your e-mail. 44

- User name: Allows you to enter the user ID of the POP3 or IMAP4 server.

- Password: Allows you to enter the user password of the POP3 or IMAP4 server.

- Outgoing mail server: Allows you to enter the SMTP address.

- Outgoing mail authentication:

When you send the mail, you can set authentication whether or not.

- Outgoing server ID: Allows you to enter the user ID of the SMTP server.

- Outgoing server password: Allows you to enter the user password of the SMTP server. Using the left soft key [Options], you can set the advanced settings.

- Reply email address: You can set up the reply e-mail address.

- Incoming port number: Enter the POP3 or IMAP4 port number that receives your e-mail.

- Outgoing port number: Enter the Port number that sends your e-mail.

- Protocol type: Choose your protocol type.(POP3/IMAP4)

- APOP secure login: Decide whether to activate APOP secure login or not. When the mailbox type is IMAP4, APOP secure login is always set to OFF.

- Maximum receive size: Set up the size of files that can receive.

(50KB/100KB)

- Save to server: Select On to save the email on the server.

- Insert signature: Select On to add your signature to your email messages.

- Retrieve download: You can select the displayed option.(All/Headers only)

- Auto retrieving: You can set up the auto retrieving setting. Access point (Menu 5.0.3.2) You can select a configured access point to connect to the Internet. Retrieve interval (Menu 5.0.3.3) You can select the auto retrieve interval. Signature (Menu 5.0.3.4) You can make your signature. Voicemail number (Menu 5.0.4) You can receive voicemail if your network service provider supports this feature. When a new voicemail has arrived, the symbol will be displayed on the screen. Please check with your network service provider for details of their service in order to configure the phone accordingly. Push messages

(Menu 5.0.5) You can set the option whether you will receive the message or not. M e s s a g e s 45 Messages Info service Receive

(Menu 5.0.6)

- On: If you select this menu, your phone will receive Info service messages.

- Off: If you select this menu, your phone will not receive Info service messages any more. Alert

- On: Your phone will beep when you have received Info service message numbers.

- Off: Your phone will not beep even though you have received info service messages. Languages You can select the language you want by pressing the OK key. Then, the info service message will be shown in the language that you selected. M e s s a g e s 46 My stuff [Menu 6]

Menu 6.1 Images The Images folder consists of embedded links for downloading pictures through the internet and default images. To view the image in details, press the OK key. When a file is selected, the following options will be displayed by pressing the left soft key [Options]. View: You can see the selected file. Delete: Delete a selected file. Set as

- Wallpaper: Currently selected image can be set as a Wallpaper.

- Picture ID: Currently selected image can be set as a Picture ID. Send via: Send the selected file to another device via MMS or E-mail. File

- Rename: Change the file name of selected file. You cannot change the extension of file.

- Move to folder: Move the selected file to the folder.

- Move to external memory

/ Move to phone memory:

Move the selected file to the external memory (if inserted) or multimedia memory in your phone.

- Copy to external memory

/ Copy to phone memory:

Copy the selected file to the external memory or multimedia memory in your phone.

- Information: Shows the file information. Slide show: You can view a slide show of the files you stored. New folder: You can create a new folder. Multi delete: You can remove a number of files you selected. Delete all: Delete all files in the list. Sort by: You can arrange the files as date, type and name. M y s t u f f 47 My stuff Thumbnail view/List view: Allows you to set the view type. Menu 6.2 Sounds The Sounds folder consists of embedded links for downloading ringtones and music as well as folders containing the default sounds and voice recordings. When a file is selected, the following options will be displayed by pressing the left soft key [Options]. Play: You can play the selected file. Delete: Delete a selected file. Set as: Currently selected sound can be set as a Ring tone or Ring tone ID. Send via: Send the selected file to another device via MMS or E-mail. File

- Rename: Changes the file name of the selected file.

- Move to folder: Move the selected file to the folder.

- Move to external memory

/ Move to phone memory:

Move the selected file to the external memory (if inserted) or multimedia memory in your phone.

- Copy to external memory

/ Copy to phone memory:

Copy the selected file to the external memory (if inserted) or multimedia memory in your phone.

- Information: Shows the selected file information. New folder: You can create a new folder. Multi delete: You can remove a number of files you selected. Delete all: Delete all files in the list. Sort by: You can arrange the files as date, type and name. M y s t u f f 48

- Move to external memory

/ Move to phone memory:

Move the selected file to the external memory (if inserted) or multimedia memory in your phone.

- Copy to external memory

/ Copy to phone memory:

Copy the selected file to the external memory (if inserted) or multimedia memory in your phone.

- Information: Shows the file information. New folder: You can create a new folder. Multi delete: You can remove a number of files you selected. Delete all: Delete all files in the list. Sort by:

Menu 6.3 Videos Shows the list of video files at My media/Videos in Multimedia memory. Supports only .3gp files, that are encoded with MPEG4 and h.263 videocodecs and AMR audio-codec. Here you can manage or send saved video clips. When a file is selected, the following options will be displayed by pressing the left soft key [Options]. Play: You can play the selected file. Delete: Delete a selected file. Send via: Send the selected file to another device via MMS or E-mail. File

- Rename: Change the file name of selected file. The maximum length of characters is 71. Warning!

You cant use the following characters: \ / : * ? < > |

- Move to folder: Move the selected file to the folder. M y s t u f f 49 My stuff Others Other files except images, sounds, videos are stored in this folder. Menu 6.4 M y s t u f f Games & Apps Menu 6.5 You can easily download games and other applications in this menu. Please note that additional costs may be incurred when using online services. External Memory When you insert the memory card, you can view Image, Sounds, Videos, and Others menu in memory card. Menu 6.6 Note You can only access the external memory on the phone while the SIM card is inserted. 50 In Profiles, you can adjust and customize the phone tones for different events, environments, or caller groups. There are five preset profiles: General, Silent, Vibrate only, Outdoor and Headset. Each profile can be personalized except Silent and Vibrate only. Press the left soft key [Menu] and select Profiles using up/down navigation keys. Activate 1. A list of profiles is displayed. 2. In the Profiles list, scroll to the

(Menu 7.X.1) profile you want to activate and press the left soft key [OK] or the OK key. 3. Then, select Activate. Profiles [Menu 7]

(Menu 7.X.2) Personalise Scroll to the desired profile in the Profiles list. After pressing the left soft key or the OK key, select Personalise. The profile setting option opens. Set the option as required. Call alert type: Set the alert type for incoming calls. Ring tone: Select the desired ring tone from the list. Ring volume: Set the volume of the ringing tone. Message alert type: Set the alert type for messages. Message tone: Select the alert tone for messages. Message volume: Set the volume of message tone. Keypad tone: Select the desired keypad tone. Keypad volume: Set the volume of keypad tone. Flip tones: Allows you to set the tone to sound when opening flip. P r o f i l e s 51 Profiles P r o f i l e s Effect sound volume: Set the volume of effect sound. Power on/off volume: Set the volume of the ringing tone when switching the phone on/off. Note All profiles cannot be renamed. 52 Contacts [Menu 8]

C o n t a c t s Send via: You can send the data of the contacts via Text message or Multimedia message. Delete: You can delete an entry. Assign speed dial: Allows you to set the selected number to add a speed dial list. Add new: After selecting the place

(SIM/Phone) you want to save, you can add to the contacts. Multi delete: Allows you to remove a number of files selected. Copy to handset: You can copy an entry from phone to SIM or from SIM to phone. Search 1. Select Search and enter the name Menu 8.1 that you want to search. Note Instant searching is available by inputting the initial letter of the name. 2. After finding the desired contact, you can make a call to the number by pressing the send key. 3. If you want to edit, delete, or copy, select the left soft key [Options]. The following menu will be displayed. View: You can view each entry in details. Edit: You can edit the selected contact. Message: After you have found the number you want, you can send a text/multimedia message to the selected number. 53 C o n t a c t s Contacts Menu 8.2 Add new You can register a new contact address. You can enter the name, different phone numbers and email addresses of a new contact. You can also assign the contact to groups, include a picture, assign a specific ringtone and enter the anniversary for the contact. You can enter and manage contact addresses depending on the memory usage. Note The contact entry fields may differ when you register a contact address in the SIM. Maximum stored name and number length depends on SIM card type. Menu 8.3 Speed dial Using this menu you can manage speed dials. You can assign any of the keys to with a name list entry. You can call directly by pressing this key. 54 1. Open the Contacts first by pressing the right soft key [Contacts] in standby mode. 2. Scroll to Speed dial, then press the left soft key [OK]. 3. If you want to add speed dial, select

<Empty> by pressing the left soft key [Assign]. Then, you can search the name in the contacts. 4. After assigning the number as speed dial, you can change and delete the entry. You can also make a call or send a message by this number. Menu 8.4 Caller groups You can list up to the members per each group. In the handset memory, there are 7 default groups: Family, Friends, Colleagues, VIP, Group 1, Group 2, and Group 3. Select the group name that you want to manage by pressing the left soft key [Option]. The following submenus will be displayed. Menu 8.5 Copy all You can copy entries from SIM card memory to phone memory and vice versa. SIM to phone: You can copy the entry from SIM card to phone memory. Phone to SIM: You can copy the entry from phone memory to SIM card. Menu 8.6 Delete all You can delete all entries from SIM card or phone memory. This function requires the security code. View members: Shows the group members you have selected. Group ring tone: Allows you to specify ring tone for the group members call. Group icon: Allows you to select the icon dependent on group. Add member: You can add group members. Remove member: You can remove the member from the group member list. But the name and the number will be remained in the Contacts. Remove all members: You can remove all members from the group member list. Rename: You can change a group name. Reset all: Allows you to reset all contacts. C o n t a c t s 55

(Menu 8.8.2) Own number

(SIM dependent) You can save and check your own number in the SIM card. Business card

(Menu 8.8.3) This option allows you to create your own business card featuring name, any numbers and email. To create a new business card, press the left soft key [New] and enter the information into the fields. If you want to edit, delete or to send a business card, select the left soft key [Options]. Contacts Settings Menu 8.7

(Menu 8.7.1) View options You can set the contact display option. Names only: Set the contact information with only name. Name and Number: Set the contact information with name and number. With pictures: Set the contact information with picture. Information Menu 8.8 Service dial number

(Menu 8.8.1) You can view the list of Service Dialing Numbers (SDN) assigned by your service provider (if supported by the SIM card). C o n t a c t s 56 Fun & Tools [Menu 9]

Favorites This option allows you to add your favorites on the current list. Menu 9.1 Menu 9.2 Alarm clock You can set the alarm to sound at a specified time. 1. If there is no alarm, press the left soft key [New] to add a new alarm. 2. Set or cancel the alarm using the options for specifying whether the alarm is on or by choosing the alarm time. Menu 9.3 Calculator The calculator module allows you to perform basic arithmetic functions such as addition, subtraction, multiplication, and division as well as some scientific functions. 1. You can enter numbers by using the number keys, and the operators by using navigation key. F u n

T o o l s Note To erase any mistake or clear the display, use the key. To include a decimal point, press the key. 3. Select the repeat period: Once, To include parentheses, press the Daily, Mon~Fri, Mon~Sat, Sat~Sun. 4. Select the alarm tone by using Options Sounds. You can press the up/down navigation keys and select the sound you want, then press the left soft key [OK]. 5. Edit the title and press the left soft key [Save]. key. 2. To calculate the result, press the OK key. 3. After calculation, press the to return to the initial state. key 57 Fun & Tools F u n

T o o l s Menu 9.4 Stopwatch This menu allows you to record the elapsed time of an event. 1. Press the left soft key [Start] to take time and record the lap time by pressing the right soft key [Lap]. 2. Press the left soft key [Stop] to ascertain the record of lap time. 3. Press the right soft key [Reset] to default condition. Menu 9.6 World time The World clock function provides time information on major cities worldwide. You can select the following options by pressing the left soft key [Options]. Change city: You can change the current city. New city: You can add a desired city. Unit converter Menu 9.5 This converts any measurement into a unit you want. There are 7 types that can be converted into units:

Currency, Area, Length, Weight, Temperature, Volume and Velocity. 58 Browser [Menu

You can access various WAP (Wireless Application Protocol) services such as banking, news, weather reports and flight information. These services are specially designed for mobile phones and they are maintained by WAP service providers. Check the availability of WAP services, pricing and tariffs with your network operator or the service provider whose service you wish to use. Service providers will also give you instructions on how to use their services. Once connected, the homepage is displayed. The content depends on the service provider. To exit the browser at any time, press the key. The phone will return to the idle menu. Navigating with the WAP browser You can surf the Internet using either the phone keys or the WAP browser menu. Using the phone keys When surfing the Internet, the phone keys function differently to phone mode. B r o w s e r Icon Description Scrolls each line of the content area Returns to the previous page Select options and confirm actions Using the WAP browser menu There are various menu options available when surfing the Mobile Web. Note The WAP browser menus may vary, depending on your browser version. 59 Browser

.1 Menu Home Connects to a homepage. The homepage will be the site which is defined in the activated profile. It will be defined by the service provider if you have not defined it in the activated profile. Menu Bookmarks This menu allows you to store the URL of favorite web pages for easy access at a later time. 2 To create a bookmark 1. Press the left soft key [Options]. 2. Select New bookmark and press the OK key. 3. After entering the desired name and URL, press the OK key. After selecting a desired bookmark, the following options are available. Connect: Connects to the selected bookmark. View: You can see the selected bookmark. Edit: You can edit the selected bookmark. Delete: You can delete the selected bookmark. New bookmark: Select this to create a new bookmark. New folder: Select this to create a new folder. Move: You can move the selected bookmark to sub folder. Copy: You can copy the selected bookmark. Send URL via: Sends the selected bookmark via Text message, Multimedia message or E-mail. Multi delete: Allows you to select and delete saved bookmarks. Delete all: Deletes all the bookmarks. B r o w s e r 60

.3 Enter address Menu You can connect directly to the site you want. After entering a specific URL, press the left soft key [Options]

and select the Connect. History This menu shows the recently browsed pages. Menu

.4 B r o w s e r There are default profiles for some operators, stored in phone memory. Its impossible to rename default profiles. Each profile has submenus as follows:

Activate: Activates the selected profile. View: You can see the selected profile. Edit: You can edit the selected profile. Saved pages The phone can save the page on display as an offline file. Menu

.5 New profile: You can add a new profile. Delete: Deletes the selected profile from the list. Settings You can set the profile, cache and security related to internet service. Menu

.6 Network pro le

.6.1) A profile is the network information used to connect to the Internet.

(Menu View style You can select the view mode you want.

(Menu

.6.2) 61 Browser

(Menu Cache

.6.3) The information or services you have accessed are saved in the cache memory of the phone. B r o w s e r Script Select whether to turn Java script on or off.

(Menu

.6.7) Note A cache is a buffer memory, which is used to save data temporarily. Memory in use

(Menu You can check the status of the memory. 6.8) Information You can view the information of WAP browser version. Menu

.7

.6.4) Cookies

(Menu Enabling cookies allows you to store cookies sent from the server. Disabling this function will prevent cookies from being stored on your phone. Security certi cates

(Menu You can see the list of personal certificates that have been stored in your phone. 6.5) Show image

.6.6) You can select to display image or not during WAP browsing.

(Menu 62 MP3 player [Menu 0]

The KP260d has an integrated MP3 player built-in. You can enjoy listening to MP3 music files on your phone using a compatible headset or via the internal loudspeaker. Note KP260d doesnt support the variable bit rate of all mentioned file types. Therefore, you cant change the file from MP3 format to AAC. M P 3 p l a y e r Note Because of the small dimension of the speaker, in some cases the audio could be distorted, especially at maximum volume and when there are lots of bass sounds. Therefore, we recommend you to use the stereo headset in order to appreciate the high quality of your music. The music player supports:

MPEG-2 Layer III, MPEG-2.5 Layer III: Sampling frequency up from 8KHz to 48KHz. Bit rate up to 320Kbps, stereo. AAC: ADIF, ADTS formats (Sampling frequency from 8KHz to 48KHz) AAC+: V1: (Bit rate 16~128Kbps) V2 : (Bit rate 16~48Kbps)

(Sampling frequency from 8KHz to 48KHz) You can transfer MP3 files from a compatible PC to the memory in your phone using the Mass Storage. When you connect the phone to a PC using the USB cable the phone appears as a removable disk through windows explorer. When you go to disconnect the phone please eject the phone safely before disconnecting the USB cable. Note You should copy MP3 to Sounds/

MP3 folder. If you copy another folder, you cant see MP3 files. The PC should run Windows 98 SE, Windows ME, Windows 2000, Windows XP operating system. In case that any invalid file is included in the playlist, an error message will pop up and take you go back to the prior screen. 63 Note Music is copyright protected in international treaties and national copyright laws. It may be necessary to obtain permission or a license to reproduce or copy music. In some countries national law prohibits private copying of copyrighted material. Please check the national legislation of the applicable country concerning the use of such material. MP3 player M P 3 p l a y e r All songs You can see the all of the music files. Menu 0.1 My playlist You can arrange the music files to your preference. Menu 0.2 Settings Menu 0.3 Set shuffle: If you select On, you can listen to the music randomly. Repeat: This menu allows to set the play mode: Repeat one, Repeat all, Off. Player skin: This menu allows to change the background of main LCD when playing MP3 file. 64 Settings [Menu #]

Menu #.2 Languages You can change the language for the display texts in your phone. This change will also affect the language Input mode. S e t t i n g s Display settings Menu #.3 Wallpaper You can select the background pictures in standby mode.

(Menu #.3.1) Backlight time

(Menu #.3.2) You can set the backlight duration of the display. Brightness You can set the brightness of LCD.

(Menu #.3.3) Date & Time You can set functions relating to the date and time. Menu #.1 Set date You can enter the current date.

(Menu #.1.1) Date format

(Menu #.1.2) You can set the Date format such as YYYY/MM/DD, DD/MM/YYYY, MM/

DD/YYYY. (D: Day / M: Month / Y: Year) Set time You can enter the current time.

(Menu #.1.3) Time format

(Menu #.1.4) Your can set the time format between 24 hours and 12 hours.

(Menu #.1.5) Auto update Select On, the phone will automatically update the data and time. 65 Settings S e t t i n g s Home screen shortcut You can set the functions of the 4 navigation keys for using shortcut in the idle mode.

(Menu #.3.4) Dial font color You can set the font color of the numbers which appear in the home screen when you type numbers.

(Menu #.3.9) Theme You can set the screen theme to be displayed on the main screen.

(Menu #.3.5) Menu style

(Menu #.3.6) Your phone provides you with Grid view and List view menu themes. Set the menu style by scrolling and pressing the left soft key [OK]. Greeting note

(Menu #.3.7) If you select On, you can edit the text which is displayed in standby mode. Network name

(Menu #.3.8) If this function is activated, network name will be displayed on LCD. Connectivity Menu #.4 Network

(Menu #.4.1) You can select a network which the phone will be registered to, either automatic or manual. Network selection

(Menu #.4.1.1) Usually, the network selection is set to Automatic. Automatic:

If you select Automatic mode, the phone will automatically search for and select a network for you. Once you have selected Automatic, the phone will be set to Automatic even if you turn the power off and on. 66 Manual: The phone will find the list of available networks and show you them. Then you can select the network which you want to use if this network has a roaming agreement with your home network operator. The phone will let you select another network if the phone fails to access the selected network. Preferred: You can set a list of preferred networks and the phone attempts to register with first, before attempting to register to any other networks. This list is set from the phones predefined list of known networks. GPRS attach

(Menu #.4.1.2) You can set GPRS service depending on various situations. Power on If you select this menu, the phone is automatically registered to a GPRS network when you switch the phone on. Starting a WAP or PC dial-up application will create the connection between phone and network making data transfer is possible. When you end the application, GPRS connection is ended but the registration to the GPRS network remains. When needed If you select this menu, the GPRS connection is established when you connect a WAP or application service and closed when you end the WAP or application connection. Access point View: You can view the selected

(Menu #.4.1.3) profile. New access point Name: You can type the network name. Bearer: You can set the bearer data service. - GPRS

<GPRS settings>

The service settings are only available when GPRS is chosen as a bearer service. S e t t i n g s 67 Settings

- APN: Input the APN of the GPRS.

- User ID: The users identify for your APN server.

- Password: The password required by your APN server.

- Primary server: Input the IP address of the primary DNS server you access.

- Secondary server: Input the IP address of the secondary DNS server you access.

(Menu #.4.2) USB connection You can choose one mode of Data service and USB Mass storage. Mass storage You can connect your phone to your PC, as a USB storage device, using the cable in three ways. 1. Connect the phone to the PC when the idle(or Top menu) screen is displayed. 2. Connect the phone while it is performing an operation or menu function, and then move to the idle(or Top menu) screen. 3. Connect the phone while it is performing an operation or menu function, and then select the USB Mass Storage menu. When you have finished using the phone memory, click Exit and take the following steps. Caution!

Before you remove the cable, it is necessary that you click Exit. Or, the integrity of transferred data is not guaranteed. 1. Click on the notification area.

[Unplug or Eject Hardware]

2. Select USB mass Storage Device, click on Stop. The following message will appear: The USB mass Storage Device can now be safely removed from the system. 3. Then remove the cable. S e t t i n g s 68 Data service Select the Data service menu to use the LG Mobile Sync program. Menu #.5 Calls You can set the menu relevant to a call by pressing the left soft key

[Select] in the Setting menu. Call divert

(Menu #.5.1) The Call divert service allows you to divert incoming voice calls, fax calls, and data calls to another number. For details, contact your service provider. All voice calls: Diverts voice calls unconditionally. If busy: Diverts voice calls when the phone is in use. If no reply: Diverts voice calls when you do not answer. If out of reach: Diverts voice calls when the phone is switched off or out of coverage. All data calls: Diverts to a number with a PC connection unconditionally. All fax calls: Diverts to a number with a fax connection unconditionally. Cancel all: Cancels all call divert service. The submenus Call divert menus have the submenus shown below.

- Activate: Activate the corresponding service. To other number: Inputs the number for diverting. To favorite number: You can check recent 5 diverted numbers.

- Cancel: Deactivate the corresponding service.

- View status: View the status of the corresponding service. S e t t i n g s 69 Settings Answer mode

(Menu #.5.2) Flip open: If you select this menu, you can receive an incoming call when you open the flip. Press any key: If you select this menu, you can receive a call by pressing any key except the end key and the right soft key. Send key only: If you select this menu, you can receive a call by only pressing the send key.

(Menu #.5.3) Send my number

(network and subscription dependent) Set by network: If you select this, you can send your phone number depending on two line service such as line 1 or line 2. On: You can send your phone number to another party. Your phone number will be shown on the receivers phone. Off: Your phone number will not be shown. S e t t i n g s 70 Call waiting

(network dependent) On: If you select Activate, you can

(Menu #.5.4) accept a waiting (receiving) call. Off: If you select Cancel, you cannot recognize the waiting

(receiving) call. Status: Shows the status of Call waiting.

(Menu #.5.5) Minute minder If you select On, you can check the call duration by a beep sound given every minute during a call. Auto redial

(Menu #.5.6) On: When this function is activated, the phone will automatically try to redial in the case of failure to connect a call. Off: Your phone will not make any attempts to redial when the original call has not connected. Send DTMF tones (Menu #.5.7) You can send touch tones during an active call to control your voice mailbox or other automated phone services. Security Menu #.6

(Menu #.6.1) PIN code request In this menu, you can set the phone to ask for the PIN code of your SIM card when the phone is switched on. If this function is activated, youll be requested to enter the PIN code. 1. Select PIN code request in the security settings menu, and then press the left soft key [OK]. 2. Set On/Off. 3. If you want to change the setting, you need to enter PIN code when you switch on the phone. 4. If you enter wrong PIN code more than 3 times, the SIM will lock out. If the PIN is blocked, you will need to key in PUK code. 5. You can enter your PUK code up to 10 times. If you put wrong PUK code more than 10 times, you can not unlock your SIM. You will need to contact your service provider. Phone lock

(Menu #.6.2) You can use a security code to avoid unauthorized use of the phone. Whenever you switch on the phone, the phone will request security code if you set phone lock to When switch on. If you set phone lock to When SIM changed, your phone will request security code only when you change your SIM card. S e t t i n g s 71 Settings Call barring

(Menu #.6.3) The call barring service prevents your phone from making or receiving certain category of calls. This function requires the call barring password. You can view the following submenus. All outgoing calls: The barring service for all outgoing calls. Outgoing international: The barring service for all outgoing international calls. O/G international except home country: The barring service for all international outgoing calls when roaming All incoming: The barring service for all incoming calls. Incoming when abroad: The barring service for all incoming calls when roaming. Cancel all barrings: You can cancel all barring services. Change password: You can change the password for Call Barring Service. S e t t i n g s 72 The submenus:

- Activate: Allows to request the network to set call restriction on.

- Disable: Set the selected call restriction off.

- View status: View the status whether the calls are barred or not.

(Menu #.6.4) Fixed dial number

(SIM dependent) You can restrict your outgoing calls to selected phone numbers. The numbers are protected by your PIN2 code. On: You can restrict your outgoing calls to selected phone numbers. Off: You can cancel fixed dialing function. Number list: You can view the number list saved as Fixed dial number.

(Menu #.6.5) Change codes PIN is an abbreviation of Personal Identification Number to prevent use by unauthorized person. You can change the access codes:

Security code, PIN2 code, PIN code. 1. If you want to change the Security code/PIN2 code input your original code, and then press the left soft key [OK]. 2. Input new Security code/PIN2 code and verify them. Menu #.7 Flight mode This allows you to use only the phone s features that do not require the use of the wireless network when you are in an airplane or in places where the wireless network is prevented. If you set the flight mode on, the icon will be displayed on the screen instead of the network signal icon. On: You cannot make (or receive) any calls, including emergency calls, or use other features that require network coverage. Off: You can deactivate the flight mode and restart your handset to access the network. Power save Choose to switch the factory set power saving settings on or off. Menu #.8 Menu #.9 Master reset You can initialize all factory defaults. You need Security code to activate this function. Memory status Menu #.0 You can check free space and memory usage of phone, SIM card and external memory (if inserted). S e t t i n g s 73 Accessories There are various accessories for your mobile phone. You can select these options according to your personal communication requirements. Standard Battery

(Type: LGIP-431A) Hands free ear-microphone Travel Adapter This charger allows you to charge the battery while away from home or your office. L Note Always use genuine LG accessories. Failure to do so may invalidate your warranty. Accessories may vary in different regions: please check with our regional service company or agent for further information. A c c e s s o r i e s 74