all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.09 MiB | / October 06 2011 | |||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | / October 06 2011 | ||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | / October 06 2011 | ||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / October 06 2011 |
1 | Users Manual | Users Manual | 3.09 MiB | / October 06 2011 |
Order Number
: GETEC-C1-11-081 Test Report Number
: GETEC-E3-11-026 FCC Part 15 subpart B Page 1 / 1 APPENDIX G
: USERS MANUAL EUT Type: LCD Monitor FCC ID.: BEJ65VS10 E N E G N L G S H I www.lg.com OWNERS MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 65VS10 E N E G N L G S H I 2 TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR-
ING Unpacking Optional Accessories Parts and buttons Connecting the Speakers To install Portrait Installing on a wall 3 4 5 6 6 7 8 REMOTE CONTROL 10 USING THE MONITOR SET 10 Connecting to a PC 10
- RGB connection
- HDMI to DVI connection 11 11
- HDMI connection 12 CUSTOMIZING SETTINGS 12 Accessing main menus 13 17 18 19 21
- PICTURE settings
- AUDIO settings
- TIME settings
- OPTION settings
- TILE settings 23 MAKING CONNECTIONS 24 Connecting to a HD receiver, DVD or VCR player
- HDMI connection
- DVI - HDMI connection
- AV connection 24 24 25 25 Connecting to the LAN 25 26 Daisy Chain Monitors 26 26
- RGB Mode
- AV Mode
- LAN connection 27 ENTERTAINMENT 27 Using integrated media features 27 28 29 30 32 35 35
- Connecting USB storage devices
- Browsing files
- Viewing Photos
- Listening to Music
- Viewing Movies
- DivX registration code
- Deactivating the DivX feature 36 TROUBLESHOOTING 36 General 39 SPECIFICATIONS 42 IR CODES 43 EXTERNAL CONTROL DEVICE SETUP Type of connector; D-Sub 9-Pin Male 43 RS-232C Setup 43 44 RS-232C configurations 45 Communication Parameter 45 Command reference list 46 Transmission / Receiving protocol ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. E N E G N L G S H I POWER MONITOR ENERGY INPUT ON OFF SAVING
. , ! ABC DEF
GHI JKL MNO
PQRS TUV 1/a/A - * #
CLEAR WXYZ MARK ARC PSM MUTE BRIGHT NESS P A G E MENU AUTO S.MENU OK BACK ID TILE EXIT ON OFF Remote control and Batteries Power Cord CD (Owner's Manual) / Card D-Sub Signal Cable CAUTION
y Do not use any pirated items to ensure the safety and product life span.
y Any damages or injuries by using pirated items are not covered by the warranty. NOTE
y The accessories supplied with your product may vary depending on the model.
y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. 4 ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. E N E G N L G S H I Speaker Screws/Cable Cable holder/
Cable Tie Speaker kit NOTE
y Cable holder/Cable tie may not be available in some areas or for some models.
y Optional accessories are not included for all models. Parts and buttons ASSEMBLING AND PREPARING 5 E N E G N L G S H I Screen Buttons Screen Marks RS-232C
(CONTROL) HDMI / DVI RGB IN AUDIO IN
(RGB/DVI) COMPONENT IN AV IN / OUT USB LAN OUT IN RGB OUT VIDEO AUDIO VIDEO AUDIO OUT IN Connection panel ( See p.25 to p.26 ) Description Changes the input source. Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. Auto in progress for optimal display change change resolution. Turns the power on or off. This is where the unit receives signals from the remote control. This Indicator lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. Screen Marks INPUT MENU
AUTO/SET
/ I IR Receiver Power Indicator NOTE
y You can set the Power indicator to on or off by selecting OPTION in the main menus. 6 ASSEMBLING AND PREPARING Connecting the Speakers
- Only on some models. 1 Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. E N E G N L G S H I Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. 2 After installing your speakers, use holders and cable ties to organize the speaker cables. (This feature is not available in all model.) NOTE
y The Kensington security system is optional. You can obtain additional accessories from most electronics stores. To install Portrait
- Only on some models. When installing Portrait, rotate it clockwise based on its front. Installing on a wall CAUTION ASSEMBLING AND PREPARING 7 E N E G N L G S H I
y Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.
y If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty.
y Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE
y The wall mount kit includes an installation manual and necessary parts.
y The wall mount bracket is optional. You can obtain additional accessories from your local dealer.
y The length of screws may differ depending on the wall mount. Be sure to use the proper length.
y For more information, refer to the instructions supplied with the wall mount. Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. 10 cm 10 cm 10 cm 10 cm 10 cm If you want to mount the monitor on the wall (op-
tional), attach the wall mounting bracket to the rear of the monitor. Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall. Use the wall mount plate and screws that comply with the VESA standard as specified below.
y 785mm(31 inch) or greater
* Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 10 mm
(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm) 8 REMOTE CONTROL REMOTE CONTROL E N E G N L G S H I The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. and ends to the CAUTION
y Do not mix old and new batteries, as this may damage the remote control.
y Make sure to point the remote control to the remote control sensor on the Monitor set. POWER POWER MONITOR MONITOR MONITOR ENERGY ENERGY INPUT INPUT ON ON OFF OFF SAVING SAVING
. , ! ABC DEF
. , ! ABC DEF
GHI JKL MNO
GHI JKL MNO
PQRS TUV
PQRS
TUV 1/a/A - * #
1/a/A - * #
CLEAR CLEAR WXYZ WXYZ Make sure to point the remote control to the remote control sensor on the Monitor set. MARK MARK ARC ARC PSM PSM MUTE MUTE BRIGHT BRIGHT NESS NESS P P A A G G E E MENU AUTO S.MENU OK BACK ID TILE EXIT ON OFF
/ I (POWER) Turns the Monitor set on or off. Monitor On / Off Button Turn off the monitor and then turn it back on. 1/a/A Button This button selection is not applicable. PSM Button Selects the Picture Status Mode. MUTE Mutes all sounds. POWER MONITOR ENERGY INPUT ON OFF SAVING
. , ! ABC DEF
GHI JKL MNO
PQRS TUV 1/a/A - * #
CLEAR WXYZ MARK ARC PSM MUTE BRIGHT NESS P A G E MENU AUTO S.MENU ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption. INPUT If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Number and Alphabet buttons Enters numbers. The alphabet selection is not applicable. Clear button This button selection is not applicable. ARC Button Selects the Aspect Ratio Mode. Brightness Key Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list. USING THE MONITOR SET 9 POWER MONITOR ENERGY INPUT ON OFF SAVING
. , ! ABC DEF
GHI JKL MNO
PQRS TUV 1/a/A - * #
CLEAR WXYZ E N E G N L G S H I MARK ARC PSM MUTE BRIGHT NESS P A G E MENU MENU AUTO AUTO S.MENU S.MENU OK OK BACK BACK ID ID TILE TILE EXIT EXIT ON ON OFF OFF AUTO Automatically adjusts picture position and minimizes image instability.(RGB input only) S.MENU
(SuperSign Menu Key) This button selection is not applicable. EXIT Clears all on-screen displays and returns to Monitor set viewing from any menu. TILE Selects the TILE Mode. NESS E MUTE MENU AUTO S.MENU OK BACK ID TILE EXIT ON OFF MENU (See p.12) Accesses the main menus or saves your input and exit menus. Navigation buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Allows the user to move return one step in an interactive application, EPG or other user interaction function. ID ON/OFF button When the number of input ID is equal to the number of ID Mode, you can control the monitor which you want in the multi display condition. USB Menu control buttons USB menu(Photo List and Music List or Movie List). 10 USING THE MONITOR SET USING THE MONITOR SET E N E G N L G S H I Connecting to a PC Your Monitor set supports the Plug & Play* feature.
* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. RGB connection Transmits the analog video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the following illustrations.
PC NOTE
y It is recommended to use the Monitor set with the HDMI connection for the best image quality.
y If you turn the Monitor set on when the set becomes cold, the screen may flicker. This is normal.
y Some red, green, or blue spots may appear on the screen. This is normal.
(not included) Macintosh Adapter
(not included) Back of the product. CAUTION NOTE
y Connect the signal input cable and tighten it by turning the screws clockwise.
y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen.
y Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.
y Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) USING THE MONITOR SET 11 HDMI to DVI connection Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI/DVI cable as shown the following illustrations. HDMI connection Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the Monitor set with an HDMI connection. E N E G N L G S H I
(not included) Back of the product. HDMI/DVI Back of the product. NOTE NOTE
y If you want to use HDMI-PC mode, you must set the input label to PC mode.
y Use a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI to HDMI cable, with a ferrite core to maintain standard compliance for the product.
y Use a High Speed HDMI Cable.
y Please check the PC environment if you cannot hear the sound in HDMI mode.
y If you want to use HDMI-PC mode, you must set the input label to PC mode. 12 CUSTOMIZING SETTINGS E N E G N L G S H I CUSTOMIZING SETTINGS Accessing main menus 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. ARC PSM MUTE BRIGHT NESS P A G E MENU AUTO S.MENU OK BACK ID TILE EXIT ON OFF PICTURE (See p.13) Adjusts the image size, quality, or effect. AUDIO (See p.18) Adjusts the sound quality, effect, or volume level.
OPTION (See p.20) Customizes the general settings.
TIME (See p.19) Sets the time, date, or Timer feature. USB (See p.28) Using integrated media features. TILE (See p.22) Adjusts the tile options. PICTURE settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. CUSTOMIZING SETTINGS 13 E N E G N L G S H I PICTURE Aspect Ratio Aspect Ratio Energy Saving Picture Mode
Screen Move OK
: 16:9
: 16:9
: Off
: Standard
%DFNOLJKW
&RQWUDVW
%ULJKWQHVV
6KDUSQHVV
&RORU
7LQW
$GYDQFHG&RQWURO
3LFWXUH5HVHW The available picture settings are described in the following:
Setting Description Aspect Ratio Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings. Changes the image size to view images at its optimal size (See p.16). Level Off Level 1 Level 2 Level 3 NOTE 100% light 80% light 60% light 40% light
y If the 'Picture Mode' is set to 'Cinema', the 'Energy saving' mode is disabled. Picture Mode Selects one of the preset image or customizes options in each mode for the best Monitor set screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the Monitor set . Mode Vivid Standard Cinema Sport Game Expert1,2 Adjusts the video image for the retail environment by enhancing the contrast, brightness, Colour, and sharpness. Adjusts the image for the normal environment. Optimizes the video image for a cinematic look to enjoy movies as if you are in a movie theater. Optimizes the video image for high and dynamic actions by emphasizing primary Colours such as white, grass, or sky blue. Optimizes the video image for a fast gaming screen such as PCs or games. Adjusts the detailed video image settings for video experts as well as general viewers. E N E G N L G S H I 14 CUSTOMIZING SETTINGS Setting Picture Mode Backlight Contrast Brightness Sharpness Color Tint NOTE Description Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is saturated. Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated. Adjusts the level of clearness of the picture. The lower the level, the softer the image. Adjusts intensity of all Colors. Adjusts the balance between red and green levels.
y If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game the subsequent menus will be automatically set.
y You cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.
y When the Expert 1,2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V Sharpness, Colour or Tint . Advanced Control Setting Colour Temperature Dynamic Contrast Dynamic Colour Noise Reduction Gamma Black Level Film Mode Description Sets the screen color to a bluish tone. Sets the screen to the standard color. Sets the screen color to a reddish tone. Option Cool Medium Warm Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. (This function can be used only under AV and Component.) Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can be used only under AV and Component.) Reduces screen noise without compromising video quality. (This function can be used only under AV and Component.) Set your own gamma value. On the monitor, high gamma values display whitish images and low gamma values display high contrast images. Low: The picture of the screen gets darker. High: The picture of the screen gets brighter. Set black level of the screen to proper level.
(Function works in the following mode - AV, Component, HDMI-DTV) You can watch a cinema-like video by eliminating judder effect. Use this function when you watch movies. White Balance This is the function to adjust the overall colour of the image to the feeling you want. Colour Management System
(Function works in the following mode - Expert 1, Expert 2 Picture mode) As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Cyan/ Magenta/Yellow). Colour difference may not be distinctive even when you make the adjustments for the general video. Adjusts Red/Green/Blue/Yellow/Cyan/Magenta. Red/Green/Blue/Yellow/Cyan/Magenta Colour: The adjustment range is -30 to +30. Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 to +30.
(Function works in the following mode - Expert 1, Expert 2 Picture mode) Setting Picture Mode CUSTOMIZING SETTINGS 15 Description Picture Reset Restores the options to the default setting. Screen
(In RGB-PC) Adjust the screen video. Option Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode. This button is for the automatic adjustment of the screen position, clock and phase. This function is available for analog signals only. Moving the screen position. Adjust the size of the screen. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. This function is available for analog signals only. Return Manual config. to the default factory settings. Auto Config.
(RGB PC input only) Position Size Phase Reset E N E G N L G S H I 16 CUSTOMIZING SETTINGS Advanced image options E N E G N L G S H I Resize the image to view the image at its optimal size by pressing ARC button while you are watching Monitor set. CAUTION
y If a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.
y If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
- Original : The aspect ratio is not adjusted from the original. It is set by the program being watched. Original
- 4:3 : The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen.
- 16:9 : The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).
- 1:1 : The aspect ratio is not adjusted from the original. (Only HDMI/DVI PC, RGB PC)
- Just Scan : Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.
- 14:9 : You can view a picture format of 14:9 or a general Monitor set programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. Just Scan CUSTOMIZING SETTINGS 17 E N E G N L G S H I
- Zoom : The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
- Cinema Zoom 1 : Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted.
- Full Wide : When Monitor set receives the wide screen signal,it will lead you to adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully. Full Wide AV Component RGB HDMI / DVI MODE ARC 16 : 9 Just Scan Original 4 : 3 1 : 1 14 : 9 Zoom Cinema Zoom 1 Full Wide 18 CUSTOMIZING SETTINGS AUDIO settings E N E G N L G S H I 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available audio options are described in the following:
OK Move AUDIO
: Off Auto Volume Auto Volume
: Off Clear Voice II
: Off
/HYHO
Balance Sound Mode
: Standard
7UHEOH
%DVV
5HVHW Speaker
: On
0 Setting Auto Volume Clear Voice ll Balance Sound Mode Speaker Description To adjust uneven sound volumes across all channels or signals automatically to the most appropriate level. To use this feature, select On. By differentiating the human sound range from others,it helps users listen to human voices better. Adjusts balance between the left and right speakers according to your room environment. Selects one of the preset sound modes or customize each option in each mode. Mode Standard Music Cinema Sport Game You can adjust internal speaker status. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. Select when you want standard-quality sound. Select when you listen to music. Select when you watch movies. Select when you watch sports events. Select when you watch sports events. CUSTOMIZING SETTINGS 19 TIME Clock Clock Off Time On Time Sleep Timer Auto Off Power On Delay Move OK
: Off
: Off
: Off
: On
: Off E N E G N L G S H I TIME settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to TIME and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following:
Setting Clock On/Off Time Sleep Timer Auto off Power on delay Description Sets the time feature. Sets the time to turn on or off the Monitor set. Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn it on again, the Sleep Timer will be set to off. If Auto off is active and there is no input signal, the set switches to off mode automatically after 10 minutes. When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. NOTE
y Once the on or off time is set, these functions operate daily at the preset time.
y The scheduled power-off function works properly only when the device time is set correctly. When the scheduled power-
on and power-off times are the same, the power-off time has priority over the power-on time if the set is turned on, and vice versa if the set is turned off. 20 CUSTOMIZING SETTINGS OPTION settings E N E G N L G S H I 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following:
Move OK
: English
: English OPTION Language Language Input Label Key Lock Set ID ISM Method DPM Select Power Indicator Interface Select : RS232C Network Setup Information Factory Reset
: Off
: Off
: Normal
: On
: ON Setting Language Input Label Key Lock Set ID ISM Method Selects a language for the display. Selects a label for an input source to identify a device connected to each input source. Description NOTE
y If you want to use HDMI-PC mode, you must set the input label to PC mode. Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position. In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position. You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered by the warranty on this product. Setting Normal Orbiter Leave on normal if you don't foresee image burn in being a problem. May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. This function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes. White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. Inversion White wash CUSTOMIZING SETTINGS 21 Description E N E G N L G S H I A user can choose to turn the power saving mode on / off. Use this function to set the power indicator on the front side of the product to On or Off. Sets up network connections. Option Network RS-232C Option DHCP Manual LAN - Enables communication via Ethernet. Enables communication via Serial. Allocates and sets up IP automatically. Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS. The setup process is complete when you select Execute, and "IP Setup Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is displayed for up to 40 seconds.
* If Network select is set to RS232C.DHCP and Manual are disabled. You can find informations about Serial No, F/W version, IP Address and MAC Address. Select this option to return to the default factory settings. Setting DPM Select Power Indicator Interface Select Network Setup Information Factory Reset 22 CUSTOMIZING SETTINGS TILE settings E N E G N L G S H I 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to TILE and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK.
- To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available lock settings are described in the following:
TILE Tile Mode Tile Mode Tile ID Natural Mode H Size V Size H Position V Position Reset Move OK
: 2x2
: Off
: 0
: Off
: 0
: 0
: 0
: 0 Setting Tile Mode Tile ID Natural H-Size V-Size H-Position V-Position Reset Description To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location.
* Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as configuration of One by one Display. Select the location of the Tile by setting an ID. The image is omitted by the distance between the screens to be naturally shown. Adjust the horizontal size of the screen taking into account the size of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. Moving the screen position horizontally. Moving the screen position vertically. Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. CUSTOMIZING SETTINGS 23 Tile Mode Configuration of an integration screen is available as well as configuration of One by one Display. E N E G N L G S H I
2II
When the Tile Mode option is disabled
2X1:
When using 2 monitors
When using 4 monitors
3X3:
When using 9 monitors ID 1 ID 2 Tile ID ID 1 ID 3 ID 2 ID 4 ID 1 ID 2 ID 4 ID 5 ID 3 ID 6 ID 7 ID 8 ID 9
ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 3 ID 4 ID 5 ID 5 ID 6 ID 7 ID 8 ID 6 ID 7 ID 8 ID 9 ID 10 ID 9 ID 10 ID 11 ID 12 ID 11 ID 12 ID 13 ID 14 ID 15 ID 13 ID 14 ID 15 ID 16 ID 16 ID 17 ID 18 ID 19 ID 20 ID 21 ID 22 ID 23 ID 24 ID 25
Before After 24 MAKING CONNECTIONS MAKING CONNECTIONS E N E G N L G S H I Connect various external devices to the ports on the Monitor sets back panel. 1 Find an external device you want to connect to your Monitor set shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver DVD VCR HDMI DVI Composite Component Speaker HDMI DVI Composite Component Composite Component PC
PC Camcorder/Camera Gaming device HDMI DVI RGB NOTE HDMI DVI Composite Component HDMI Composite Component
y If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device. MAKING CONNECTIONS 25 DVI - HDMI connection Transmits the digital video signal from an external device to the Monitor set. Connect the external device and the Monitor set with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. E N E G N L G S H I HDMI-DVI Signal Cable
(not included) RCA-PC Audio Cable
(not included) Connecting to a HD receiver, DVD or VCR player Connect a HD receiver, DVD, or VCR player to the Monitor set and select an appropriate input mode. HDMI connection Transmits the digital video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the HDMI cable as shown on the following illustration. HDMI Signal Cable
(not included) NOTE
y Use a High Speed HDMI Cable.
y High Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher. 26 MAKING CONNECTIONS AV connection Transmits the digital video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the BNC cable as shown on the following illustration. E N E G N L G S H I AV IN / OUT IN VIDEO AUDIO OUT BNC Cable
(not included) RCA-PC Audio Cable
(not included) Connecting to the LAN LAN connection Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM. For more information about the program, please refer to eZ-Net Guide in the enclosed CD-ROM. A Connect PC to Monitor directly. LAN Monitor Set PC B Using a router(Switch) LAN Switch Monitor Set PC C Using the Internet. LAN Network Monitor Set PC NOTE
y Using LAN establishes communication between your PC and the monitor and enables to use the OSD menus on the PC as well as on the monitor. MAKING CONNECTIONS 27 Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product.
7RXVHGLIIHUHQWSURGXFWVFRQQHFWHGWRHDFKRWKHU&RQQHFWRQHHQGRIWKHVLJQDOLQSXWFDEOHSLQ
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products E N E G N L G S H I RGB Mode 15-pin D-Sub Signal Cable
(Max 3m) Product 1 Product 2 Product 3 Product 4 AV Mode Audio Cable
(Not included) AV IN / OUT IN VIDEO AUDIO OUT AV IN / OUT IN VIDEO AUDIO OUT AV IN / OUT IN VIDEO AUDIO OUT BNC Cable
(Not included) NOTE Product 1 Product 2 Product 3
y When multi-connecting in/out cascade format, no loss cables are recommended.
y We recommend that you should use cable distributor. 28 ENTERTAINMENT E N E G N L G S H I ENTERTAINMENT Using integrated media features Connecting USB storage devices Connect USB storage devices such as a USB flash memory, external hard drive, or MP3 player to the Monitor set and use multimedia features
(Browsing files See p.27). Connect a USB flash memory or USB memory card reader to the Monitor set as shown on the following illustration. The USB screen appears. or To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the Monitor set or files. 1 Press Q.MENU to access the quick menus. 2 Press the Navigation buttons to scroll to USB Device and press OK. 3 Disconnect the USB storage device only when the message says that it is safe to remove. CAUTION
y Do not turn the Monitor set off or remove a USB storage device while the USB storage device is connected to the Monitor set, as this could result in loss of files or damage to the USB storage device.
y Back up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty. Precautions when using the USB device
y Only a USB storage device is recognizable.
y If the USB storage device is connected through a USB hub, the device is not recognizable.
y A USB storage device using an automatic recognition programme may not be recognized.
y A USB storage device which uses its own driver may not be recognized.
y The recognition speed of a USB storage device may depend on each device.
y Please do not turn off the Set or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
y Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files.
y Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. Data in a USB storage device cannot be deleted in the NTFS file system.
y Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized.
y Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized.
y Some USB storage devices may not be supported or operated smoothly.
y Maximum of 999 files and folders can be recognized.
y Data in a USB storage device cannot be aligned. Up to 128 English characters can be recognized as a file name.
y Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
y If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the Set is turned on.
y The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
y Any device with more than the recommended capacity may not work properly.
y If a USB external hard disk with a Power Saving function does not work, turn the hard disk off and on again to make it work properly.
y Names and subtitles of some language files may not display properly.(Korean, Chinese, Japanese)
y When using Korean or Chinese subtitles or file names, it is recommended to set the language to the corresponding one. ENTERTAINMENT 29 Browsing files Access the Photo, Music or Movie lists and browse files. 1 Connect a USB storage device. 2 Press MENU to access the main menus. 3 Press the Navigation buttons to scroll to USB and press OK. 4 Press the Navigation buttons to scroll to PHOTO LIST, MUSIC LIST or MOVIE LIST and press OK. E N E G N L G S H I PHOTO LIST MUSIC LIST MOVIE LIST 5 Select Drive1 to access the connected USB storage device
USB Device Free Space 150 MB
6 Select a folder you want.
- To return to the previous level, select Up Folder. USB Device Free Space 150 MB
30 ENTERTAINMENT E N E G N L G S H I 7 Press the Navigation buttons to browse files. The highlighted file will display in the preview window. 1 2
USB Device Free Space 150 MB
KY101 02/12/2010 KY103 02/12/2010 KY104 02/12/2010 KY102 02/12/2010 KY105 02/12/2010 JMJ001 02/12/2010 JMJ005 02/12/2010 JMJ002 02/12/2010 JMJ006 02/12/2010 JMJ003 02/12/2010 JMJ007 02/12/2010
JMJ004 02/12/2010 JMJ008 02/12/2010
MARK
EXIT
3 4 5 6 7 Description No. 1 Current page number/total number of pages 2 The number of selected files 3 File and Folder name 4 Preview window 5 File size, information. 6 Return to the previous level 7 Available buttons on the remote control Viewing Photos View image files saved in a USB storage device. The displays on the screen may differ from the model. 1 Press the Navigation buttons to scroll to USB and press OK. 2 Press the Navigation buttons to scroll to Photo List and press OK. 3 Press the Navigation buttons to select Drive1 to access the connected USB storage device. 4 Press the Navigation buttons to scroll to a folder you want and press OK. 5 Press the Navigation buttons to scroll to a file you want and press OK. A pop-up window will appears.
USB Device Free Space 150 MB
KY101 02/12/2010 KY103 02/12/2010 KY104 02/12/2010 Supported file format
KY102 02/12/2010 1366x768, 125KB KY105 02/12/2010 JMJ001 02/12/2010 JMJ002 02/12/2010 JMJ003 02/12/2010 JMJ004 02/12/2010 View Mark All Delete Close JMJ005 02/12/2010 JMJ006 02/12/2010 JMJ007 02/12/2010 JMJ008 02/12/2010 Type Photo Music Video Supported file format y JPG y Available size Baseline: 64 pixel (W) x 64 pixel (H) -
15360 pixel (W) x 8640 pixel (H) Progressive: 64 pixel (W) x 64 pixel (H) -
1024 pixel (W) x 768 pixel (H) y MP3 y Bit rate range 32 Kbps to 320 Kbps y Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz
* A copy-protected file will not play. y MPEG1, MPEG2, MPEG4(Doesn't support Microsoft MPEG 4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback) y Audio format: Mpeg, Mp3, PCM, Dolby y Sampling frequency: within 32k to 48khz y Bit rate of audio format: within 32k to Digital 320kbps y Supported subtitle format: *.smi, *.srt,
*.sub (MicroDVD, SubViewer 2.0), *.ass,
*.ssa, *.txt (DVD Subtitle System)
MARK
EXIT
6 View photos by using the following menus. Menu View Mark All or Unmark All Delete Description Displays the selected photo in a full-
screen view. y Drive: Views photos saved in a USB storage drive. Selects all files or clears all of your selections Deletes a file saved in a USB storage device. NOTE You cannot delete the files saved in a shared folder of a PC. Close Closes the pop-up menu. ENTERTAINMENT 31 Using photo options Listening to Music Use the following options while viewing photos. 1 Press the Navigation buttons to scroll to USB and press OK. 2 Press the Navigation buttons to scroll to Music List and press OK. E N E G N L G S H I
6OLGHVKRZ
%*0
Delete Option Hide Options Number of selected photos Option Slideshow BGM
(Rotate) Description Starts or stops a slideshow with selected photos. If there are no selected photos, all photos saved in the current folder display during a slideshow. To set a slideshow speed, select Option. Turns the background music on or off. To set the background music folder, select Option. Rotates photos clockwise (90, 180, 270, 360). NOTE The supported photo size is limited. You cannot rotate a photo if the resolution of the rotated width is larger than the supported resolution size. Deletes a photo. y Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). y Music Album: Selects a music folder for the background music. Delete Option NOTE You cannot change the music folder while the background music is playing. Hide Hides the option window. To display the options, press OK. 3 Select Drive1 to access the connected USB storage device. 4 Press the Navigation buttons to scroll to a folder you want and press OK. 5 Press the Navigation buttons to scroll to a file you want and press OK. A pop-up window will appears. Music List Music S003 00:00/01:34 Up Folder Page 2/3 No Marked Title 4395KB 1Kbps Play Play with Photo Mark All Delete Close Up Folder S001 S002 S003 S004 S005 USB Device Free Space 150 MB Duration Up Folder 03:33 04:45 01:30 02:37 01:58 Navigation Option Page Change MARK Mark EXIT Exit 6 Play music by using the following menus. Menu Play, Stop Play, or Play Marked Play with Photo Mark All or Unmark All Delete Description Plays music, stops playback, or plays the selected music file. If you play music without selecting music files, all of the music files saved in the current folder will play. The icon will appear in front of the duration on the currently playing file. y Drive: Listen to music files saved in a USB storage drive. Displays photos during playback. Selects all files or clears all of your selections Deletes a file saved in a USB storage device. Close Closes the pop-up menu. 32 ENTERTAINMENT E N E G N L G S H I 7 Control playback by using the following buttons. Button Description Stops playback Plays a music file Pauses or resumes playback Skips to the next file Skips to the previous file NOTE
y A damaged or corrupted file will not play and the duration of the file display as 00:00.
y A copy-protected file will not play.
y If the Monitor set is not in use for some time during playback, the information box as a screensaver will appear to prevent image burn. To return to the Music list screen, press OK or BACK. Folder name/file name
Time elapsed /Duration Viewing Movies Play video files on the Monitor set. Your Monitor set displays all of the video files saved in a USB storage device.
y Movie (*.dat / *.mpg / *.mpeg / *.ts / *.trp / *.tp /
*.vob/ *.mp4 / *.mkv / *.avi / *.divx) supporting file.
y Video format: MPEG1, MPEG2, MPEG4(Doesnt support Microsoft MPEG 4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback)
y Audio format: Mpeg, Mp3, PCM, Dolby Digital
y Bit rate: within 32 kbps to 320 kbps (MP3)
y Subtitle format: *.smi / *.srt / *.sub (Micro DVD, SubViewer 2.0) / *.ass / *.ssa / *.txt (DVD Subtitle System).
y Some user-created subtitles may not work properly.
y Some special characters are not supported in subtitles.
y HTML tags are not supported in subtitles.
y Subtitles in languages other than the supported languages are not available.
y Time information in an external subtitle file should be arranged in ascending order to be played.
y The screen may suffer temporary interruptions
(image stoppage, faster playback, etc.) when the audio language is changed.
y A damaged movie file may not be played correctly, or some player functions may not be usable.
y Movie files produced with some encoders may not be played correctly.
y If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
y HD videos with a maximum of 1920 x 1080 @
25/30P or 1280 x 720 @ 50/60P are supported, depending on the frame.
y Videos with resolutions higher than 1920 x 1080 @ 25/30P or 1280 x 720 @ 50/60P may not work properly depending on the frame.
y Movie files other than the specified types and formats may not work properly.
y Max bit rate of playable movie file is 20 Mbps.
y We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264 /
AVC. E N E G N L G S H I ENTERTAINMENT 33
y DTS Audio codec is not supported.
y A movie file more than 30GB in file size is not supported for playback.
y A DivX movie file and its subtitle file must be located in the same folder.
y A video file name and its subtitle file name must be identical for it to be displayed.
y Playing a video via a USB connection that doesnt support high speed may not work properly.
y Files encoded with GMC (Global Motion Compensation) may not be played.
y When you are watching the movie by Movie List function, you can adjust an image by Energy Saving key on the remote control. User setup for each image mode does not operate. Video Decoder
y mpeg, vob: MPEG1, MPEG2
y dat: MPEG1,MPEG2
y ts,trp,tp: MPEG2, H.264 / AVC
y mp4: MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.x, Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10beta 1, Xvid 1.10-beta 2, H.264/AVC
y avi: MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4, Divx 5, Divx 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10beta 1, Xvid 1.10beta 2, H.264/AVC
y mkv: H.264 / AVC, MPEG 1, MPEG 2, MPEG 4 SP , MPEG4 ASP
y divx: MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4, Divx 5, Divx 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10beta 1, Xvid 1.10beta 2, H.264 / AVC Audio Codec
y mpg, mpeg, vob, dat, avi, divx, m4v: AC3, MPEG, MP3, PCM Max Resolution
y 720 x 576 @ 25p
y 720 x 480 @ 30p 34 ENTERTAINMENT E N E G N L G S H I 1 Press the Navigation buttons to scroll to USB and press OK. 2 Press the Navigation buttons to scroll to Movie List and press OK. 3 Select Drive1 to access the connected USB storage device. 4 Press the Navigation buttons to scroll to a folder you want and press OK. 5 Press the Navigation buttons to scroll to a file you want and press OK. A pop-up window will appears. Movie List Movie M002 640x480, 720KB Up Folder Page 2/3 No Marked Title Up Folder Favorite Music M001 M002 M001 M001 USB Device Free Space 150 MB Duration 1366x768, 125KB Play Mark All Delete Close 01:34:15 01:35:30 01:30:20 Navigation Option Page Change MARK Mark EXIT Exit 6 Play video by using the following menus. Menu Play or Play Marked Mark All or Unmark All Delete or Delete marked Close Description Plays a movie or plays the selected movie. y Drive: Views videos saved in a USB storage drive. Selects all files or clears all of your selections. Deletes a file formatted on the FAT32 file system and saved in a USB storage device. Closes the pop-up menu. Option Picture Size Subtitle Language Audio Language Subtitle File
/DQJXDJH
6\QF
3RVLWLRQ
Full Screen 1/6 1/6 Off Latin 1
+0.5 15 OK When you select the Set Video Play. Menu Description Picture Size Subtitle Language or Audio Language Language Selects your desired Language. Sync Selects your desired picture format during movie play Changes the Language Group of the subtitle/audio during movie play. Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play. Changes the position of the subtitle either up or down during movie play. Position 1 Press the Navigation button to show the When you select the Set Video. ENTERTAINMENT 35 Picture Size, Audio Language or Subtitle Language. 2 Press the Navigation button to make appropriate adjustments. Subtitle Language Latin1 Latin2 Latin4 Cyrillic Greek Hebrew Chinese Korean Support Language English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, Valencian Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Estonian, Latvian, Lithuanian Bulgarian, Macedonian, Russian, Ukrainian, Kazakh Greek Hebrew Chinese Korean NOTE
y Only the files saved in ASCII CODE is supported for the external subtitles of the movie.
y Only 500 alphabets and 500 numbers are supported for each line of the subtitle.
y Only 10,000 of sync blocks can be supported within the subtitle file. 1 Press the Navigation button to make appropriate adjustments. (See p.33) E N E G N L G S H I When you select the Set Audio, 1 Press the Navigation button to show the Sound Mode, Auto Volume, Clear Voice II, Balance. 2 Press the Navigation button to make appropriate adjustments.(See p.17) Using the remote control. Button
Description When playing, repeatedly, press the REW() button to speed up (x2) (x4)
(x8) (x16) (x32) . repeatedly, press the FF() button to speed up (x2) (x4) (x8)
(x16) (x32). y Pressing these buttons repeatedly increases the fast forward/reverse speed. Pause () During playback, press the Pause () button. y Still screen is displayed. y If no buttons are pressed on the remote control for 10 minutes after pausing, the Monitor set returns to the playback state. y Press the Pause () button and then use the FF () button for slow motion. Play During playback, stops the screen. Press the Play button to return to normal playback. 36 ENTERTAINMENT E N E G N L G S H I DivX registration code Check and register the DivX registration code of your Monitor set so that you can rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the files registration code should be same with your Monitor sets DivX registration code. 1 Press MENU to access the USB menus. 2 Press the Navigation button to scroll to DivX Reg. Code and press OK. 3 View the registration code of your Monitor set. NOTE
y While you are checking the registration code, some buttons may not work.
y If you use the DivX registration code of another device, you cannot play the rented or purchased DivX file. Make sure to use the DivX registration code assigned to your Monitor set.
y The video or audio files that are not converted by the standard DivX codec may be corrupted or not be played.
y The DivX VOD code allows you to activate up to 6 devices under one account. DivX(R) Video On Demand Your registration Code is: xxxxxxxxxx To learn more visit www.divx.com/vod. Close Close ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX, DivX Certified and associated logos are trademarks of DivX, Inc. and are used under license. Pat. 7,295,673; 7,460,668; 7,515,710;
7,519,274 Deactivating the DivX feature Deactivate all of the devices through the web server and block devices from activating. Delete the existing authentication information to receive a new DivX user authentication for the Monitor set. Once this function is executed, a DivX user authentication is required again to see DivX DRM files. 1 Press MENU to access the USB menus. 2 Press the Navigation button to scroll to Deactivation and press OK. 3 Select Yes to confirm. DivX(R) Video On Demand Do you want to deactivate your device?
Yes No 4 Select Close. DivX(R) Video On Demand This device is deactivated. Your deactivation code is: xxxxxxxx To learn more visit www.divx.com/vod. Close 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. E N E G N L G S H I TROUBLESHOOTING 37 TROUBLESHOOTING No image is displayed Problem Is the product power cord connected?
Is the power indicator light on?
Power is on, power indicator is blue but the screen appears extremely dark. The power indicator amber?
Does the 'Out of range' message appear?
Does the 'Check signal cable'
message appear?
y See if the power cord is properly connected to the outlet. Resolution y See if the power switch is turned on. y May need service. y Adjust brightness and contrast again. y Backlight may need repair. y If the product is in power saving mode, move the mouse or press any key. y Turn both devices off and then back on. y The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual.
* Maximum resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI : 1920 x 1080 @ 60 Hz y The signal cable between PC and product is not connected. Check the signal cable. y Press the 'INPUT' menu in the remote Control to check the input signal.
'Unknown Product' message appears when the product is connected. Resolution Problem Did you install the driver?
y Install the product driver, which is provided with the product, or download it from the web site. (http://www.lg.com) y See if the plug&play function is supported by referring to the video card user manual. NOTE
y Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz.
y Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. TROUBLESHOOTING 38
'Key Lock On' message appears. Problem The 'Key Lock On' message appears when pressing the Menu button. Resolution y The control locking function prevents unintentional OSD setting change due to careless usage. To unlock the controls, simultaneously SUHVVWKH0HQXEXWWRQDQGEXWWRQIRUVHYHUDOVHFRQGV<RX
cannot set this function using the remote control buttons. You can set this function in the product only.) E N E G N L G S H I The screen image looks abnormal. Problem Is the screen position wrong?
Do thin lines appear on the background screen?
Horizontal noise appears or the characters look blurred. Resolution y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. The screen is displayed abnormally. y The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. After-image appears on the product. Problem After-image appears when the product is turned off. y If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. Resolution The audio function does not work. Problem No sound?
Sound is too dull. Sound is too low. Resolution y See if the audio cable is connected properly. y Adjust the volume. y See if the sound is set properly. y Select the appropriate equalize sound. y Adjust the volume. TROUBLESHOOTING 39 Screen color is abnormal. Problem Resolution Screen has poor color resolution
(16 colors). y Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color Table menu in Windows. Screen color is unstable or mono-
colored. Do black spots appear on the screen?
y Check the connection status of the signal cable. Or, re-insert the PC video card. y Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. E N E G N L G S H I The operation does not work normally. Problem The power suddenly turned off. Resolution y Is the sleep timer set?
y Check the power control settings. Power interrupted. y "CAUTION! FAN STOP!"
If the power is turned off after this message appears, it means that the fan is out of order.In this case, contact your local service center. 40 SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type E N E G N L G S H I Video Signal Pixel Pitch Max. Resolution 1638.3 mm Wide (64.5 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1638.3 mm 0.744 mm (H) x 0.744 mm (V) RGB : 1920 X 1080 @60Hz HDMI/DVI : 1920 X 1080 @60Hz
- It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 X 1080 @60Hz Horizontal Frequency Vertical Frequency Synchronization Type Rated Voltage Power Consumption Input Connector Power Environmental conditions Operating Temperature Operating Humidity Storage Temperature Storage Humidity HDMI/DVI : 1920 X 1080 @60Hz
- It may not be supported depending on the OS or video card type. RGB : 30 - 83 kHz HDMI/DVI : 30 - 83 kHz RGB : 56 - 75 Hz HDMI/DVI : 56 - 60 Hz Separate Sync, Composite Sync, Digital 15-pin D-Sub type, HDMI (digital), Composite Video, RS-232C, LAN AC 100-240 V~ 50/60 Hz 4.6 A On Mode : 480 W Typ. 6OHHS0RGH:5*%:+'0,'9, 2II0RGH:
0 C to 40 C 10 % to 80 %
-20 C to 60 C 5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 41 E N E G N L G S H I
/ Dimensions
(Width x Height x Depth) / Weight H W D 1535.4 mm (60.44 inch) x 136.7 mm (6.44 inch) x 907.6 mm (35.73 inch) / 51.1 kg (112.65 lb) H W D 1535.4 mm (60.44 inch) x 136.7 mm (6.44 inch) x 907.6 mm (35.73 inch) / 51.85 kg (114.30 lb)
* Applicable only for models that support the speakers Audio RMS Audio Output Input Sensitivity Speaker Impedance 10 W + 10 W (R + L) 0.7 Vrms
Product specifications shown above may be changed without prior notice due to upgrade of product functions. 42 SPECIFICATIONS RGB (PC) supported mode DTV Mode Resolution Component 480i 576i 480p 576p 720p 1080i 1080p o o o o o o o HDMI/DVI
(DTV) x x o o o o o Power Indicator Mode Product On Mode Sleep Mode Off Mode Green Amber
NOTE
y DTV/PC selection on RGB and HDMI/DVI inputs is available for PC resolutions : 640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x 1080 / 60 Hz and DTV resolutions : 480p, 720p, 1080p. E N E G N L G S H I Resolution 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1280 x 720 1280 x 768 1360 x 768 1366 x 768 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 Horizontal Frequency(kHz) 31.469 31.468 31.469 37.5 37.879 46.875 49.725 48.363 60.123 44.772 47.7 47.72 47.7 63.981 79.98 65.290 67.5 Vertical Frequency(Hz) 70.8 70.8 59.94 75 60.317 75 74.55 60 75.029 59.855 60 59.799 60 60.02 75.02 59.954 60 HDMI/DVI(PC) supported mode Resolution 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 768 1360 x 768 1366 x 768 1280 x 1024 1680 x 1050 1920 x 1080 Horizontal Frequency(kHz) 31.469 37.879 48.363 44.772 47.7 47.72 47.7 63.981 65.290 67.5 Vertical Frequency(Hz) 59.94 60.317 60 59.855 60 59.799 60 60.02 59.954 60 IR CODES 43 E N E G N L G S H I IR CODES
y This feature is not available for all models. Code (Hexa) 95 08 0B 08 C4 79 43 40 41 07 06 44 28 5B 4D 02 03 09 E0 E1 10 to 19 72 71 63 61 7B 5A BF D5 C6 76 77 AF 99 B1 B0 BA 8F 8E Function Energy Saving ()
(POWER) INPUT Monitor On Monitor Off ARC (MARK) MENU Up () Down () Left (<) Right (>) OK() BACK() EXIT PSM
( - ) MUTE Bright (Page UP) Bright (Page Down) Number Key 0 to 9 Red Key Green Key Yellow Key Blue Key TILE AV Component RGB PC HDMI/DVI ARC (4:3) ARC (16:9) ARC (ZOOM) Auto Config.
Note R/C BUTTON R/C BUTTON (POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON 44 EXTERNAL CONTROL DEVICE SETUP CONTROLLING THE MULTIPLE PRODUCT E N E G N L G S H I
y Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC.
y In the Option menu, Set ID must be between 1 and 225 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture.
y The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC. RS-232C Cable
(not included) PC Set 1 Set 2 Set 3 Set 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations (Not Standard) PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS Set 3 2 5 6 4 7 8 TXD RXD GND DSR DTR CTS RTS D-Sub 9 D-Sub 9
(Female) (Female) PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS Set 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS D-Sub 9 D-Sub 9
(Female) (Female) Communication Parameter
y Baud Rate : 9600 buad Rate (UART)
y Data Length : 8 bit
y Parity Bit : None
y Stop Bit : 1bit
y Flow Control : None
y Communication Code : ASCII code
y Use a crossed (reverse) cable EXTERNAL CONTROL DEVICE SETUP 45 Command reference list COMMAND 1 COMMAND 2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Lock/ key Lock 14. Balance 15. Color Temperature 16. Abnomal state 17. ISM mode 18. Auto configuration 19. Key 20. Tile Mode 21. Tile H Position 22. Tile V Position 23. Tile H Size 24. Tile V Size 25. Tile ID Set 26. Natural Mode (In Tile mode) 27. Picture mode (PSM) 28. Sound mode 29. Fan Fault check 30. Elapsed time return 31. Temperature value 32. Lamp fault check 33. Auto Volume 34. Speaker 35. Time 36. On Timer (On/Off Timer) Time 37. Off Timer (On/Off Timer) Time 38. Scheduling input select 39. Sleep Time k k k k k k k k k k k k k k k k j j m d d d d d d d d d d d d d d d f f f f f a b c d e f g h i j k l m t u z p u c d e f g h i j x y w l n p u v a d e u f DATA 1 00H to 01H 02H to 09H 01H to 1FH 00H to 01H 00H to 01H 00H to 64H 00H to 64H 00H to 64H 00H to 64H 00H to 64H 00H to 64H 00H to 01H 00H to 01H 00H to 64H 00H to 02H FFH 01H to 08H 01H Key Code 00H to 55H 00H to 14H 00H to 14H 00H to 64H 00H to 64H 00H to 19H 00H to 01H 00H to 06H 00H to 05H FFH FFH FFH FFH 00H to 01H 00H to 01H 00H to 06H F1H to F4H E0H to E4H 01H to 80H F1H to F4H E0H to E4H 01H to 80H F1H to F4H 00H to 08H DATA 2 DATA 3 E N E G N L G S H I 00H to 17H 00H to 17H 00H to 3BH 00H to 3BH 00H to 17H 00H to 3BH 02H to 09H 46 EXTERNAL CONTROL DEVICE SETUP E N E G N L G S H I 40. Auto Sleep 41. Power On Delay 42. Language 43. DPM Select 44. Reset 45. Power Saving 46. Power Indicator 47. Serial no. 48. S / W Version 49. Input Select COMMAND 1 COMMAND 2 f f f f f f f f f x g h i j k l o y z b DATA 1 00H to 01H 00H to 64H 00H to 09H 00H to 01H 00H to 02H 00H to 03H 00H to 01H FFH FFH 20H to A0H DATA 2 DATA 3
y Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are not executed and treated as NG. Transmission / Receiving protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product. range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data. Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20) OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG Data 01 : Power On 01. Power (Command: k a) To control Power On/Off of the set. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off. Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 00 : Power Off Data 01 : Power On 02. Input Select (Command: k b) (Main Picture Input) To select input source for the Set. You can also select an input source using the INPUT button on the remote control. Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 02 : AV 04 : Component 07 : RGB (PC) 08 : HDMI (DTV) 09 : HDMI (PC) Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Data 02 : AV 04 : Component 07 : RGB (PC) 08 : HDMI (DTV) 09 : HDMI (PC) 03. Aspect Ratio (Command: k c) To adjust the screen format. You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the Screen menu. Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal Screen (4 : 3)
* When the RGB, HDMI / DVI PC mode(1:1) 02 : Wide Scran (16 : 9) 04 : Zoom (AV) 06 : Original (AV) 07 : 14 : 9 (AV) 09 : Just Scan (HD DTV) 10 to 1F : Cinema Zoom 1 to 16 B : Full Wide Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
E N E G N L G S H I EXTERNAL CONTROL DEVICE SETUP 47 04. Screen Mute (Command: k d) To select screen mute on / off. Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on) 01 : Screen mute on (Picture off) Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command: k e) To control On/Off of the Volume Mute. Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume Mute On (Volume Off) 01 : Volume Mute Off (Volume On) Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 00 : Volume Mute On (Volume Off) 01 : Volume Mute Off (Volume On) 06. Volume Control (Command: k f) To adjust Volume. Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code) Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Real data mapping 0 : STEP 0
A : STEP 10
F : STEP 15 10 : STEP 16
64 : STEP 100 07. Contrast (Command: k g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping . See p.47 E N E G N L G S H I 48 EXTERNAL CONTROL DEVICE SETUP 08. Brightness (Command: k h) To adjust screen brightness. You can also adjust the brightness in the Picture menu. Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping . See p.47 Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping . See p.46 09. Color (Command: k i) (Video Timing only) To adjust the screen color. You can also adjust the color in the Picture menu. Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping . See p.47 Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H 10. Tint (Command: k j) To adjust the screen tint. You can also adjust the tint in the Picture menu. Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code) 00H : Step R50 64H : Step G50 Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Tint Real data mapping 0 : Step 0 to Red
64 : Step 100 to Green 11. Sharpness (Command: k h) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping. See p.47 Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H 12. OSD Select (Command: k l) To control OSD on/off to the set. Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 00: OSD Off Data 01: OSD On Data 01: OSD On 13. Remote Lock /Key Lock (Command: k m) To control Remote Lock on/off to the set. This function, when controlling RS-232C, locks the remote control and the local keys. Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off Data 01: On Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 00: Off Data 01: On 14. Balance (Command: k t) To adjust the sound balance. Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code) 00H : Step L50 64H : Step R50 Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
(Hexadecimal code) 00H : Step 0 to L50 64H : Step 100 to R50
* Balance : L50 to R50 15. Color Temperature (Command: k u) To adjust the screen color temperature. Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00 : Medium 01 : Cool 02 : Warm Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 00 : Medium 01 : Cool 02 : Warm 16. Abnormal state (Command: k z) Used to Read the power off status when Stand-by mode. Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data 00 : Normal (Power on and signal exist) 01 : No signal (Power on) 02 : Turn the monitor off by remote control 03 : Turn the monitor off by sleep time function 04 : Turn the monitor off by RS-232C function 08 : Turn the monitor off by off time function 09 : Turn the monitor off by auto off function 17. ISM mode (Command: j p) Used to select the afterimage preventing function. Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 01 : Inversion 02 : Orbiter 04 : White Wash 08 : Normal Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. Auto Configure (Command: j u) To adjust picture position and minimize image shaking. Automatically. NB : Only applies to RGB(PC) mode. Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command: m c) To send IR remote key code. Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to IR CODES. See p.43 Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
20. Tile Mode (Command: d d) Change a Tile Mode. Transmission
[d][d][ ][Set ID][ ][Data][Cr]
EXTERNAL CONTROL DEVICE SETUP 49 Data 00 or 11 12 13 14
... 55 Description Tile mode is off. 1 x 2 mode (column x row) 1 x 3 mode 1 x 4 mode
... 1 x 2 mode E N E G N L G S H I
* The data can not be set to 0X or X0 except 00. Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
21. Tile H Position (Command: d e) To set the Horizontal position. Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H 00H : Step -10(Left) 14H : Step 10(Right) Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
22. Tile V Position (Command: d f) To set the Vertical position. Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H 00H : Step -10(Down) 14H : Step 10(Up) Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Tile H Size (Command: d g) To set the Horizontal size. Transmission
[d][g][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping . See p.47 Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Tile V Size (Command: d h) To set the Vertical size. Transmission
[d][h][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 64H
* Refer to 'Real data mapping . See p.47 Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
50 EXTERNAL CONTROL DEVICE SETUP 25. Tile ID Set (Command: d i) To assign the Tile ID for Tiling function. Transmission
[d][i][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 19H
(Hexadecimal code) E N E G N L G S H I Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
26. Natural Mode (Command: d j) To assign the Tile Natural mode for Tiling function. Transmission
[d][j][ ][Set ID][ ][Data][x]
Data 00 : Natural Off 01 : Natural On ff : Read Status Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
27. Picture Mode (Command: d x) To adjust the picture mode. Transmission
[d][x][ ][Set ID][ ][Data][x]
Data Structure Data(Hex) 00 01 02 03 04 05 06 Mode Vivid Standard Cinema Sport Game Export 1 Export 2 Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
28. Sound Mode (Command: d y) To adjust the Sound mode. Transmission
[d][y][ ][Set ID][ ][Data][x]
Data Structure Data(Hex) 01 02 03 04 05 Mode Standard Music Cinema Sport Game Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
29. Fan Fault check (Command: d w) To check the Fan fault of the Set. Transmission
[d][w][ ][Set ID][ ][Data][x]
* The data is always FF (in Hex). Data ff : Read Status Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
* Data is the status value of the Fan fault. Data 00 : Fan fault 01 : Fan Ok 02 : N/A (Not Avaliable) 30. Elapsed time return (Command: d l) To read the elapsed time. Transmission
[d][l][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex). Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data is always FF(in Hex).
(Hexadecimal code) 31. Temperature value (Command: d n) To read the inside temperature value. Transmission
[d][n][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex). Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal. 32. Lamp fault Check (Command: d p) To check lamp fault. Transmission
[d][p][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex). Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal. Data 00 : Lamp Fault 01 : Lamp Ok 02 : N/A (DPM/Power Off) 33. Auto volume (Command: d u) Automatically adjust the volume level. Transmission
[d][u][ ][Set ID][ ][Data][x]
Data 00: Off Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Data 01: On 34. Speaker (Command: d v) Turn the speaker on or off. Transmission
[d][v][ ][Set ID][ ][Data][x]
Data 00: Off Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
Data 01: On 35. Time (Command: f a) Set the current time. Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
00 : Monday 01 : Tuesday 02 : Wednesday 03 : Thursday 04 : Friday 05 : Saturday 06 : Sunday
[Data2]
0H to 17H (Hours)
[Data3]
00H to 3BH (Minutes) Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
*When reading data, FFH is inputted for [Data1],
[Data2] and [Data3]. In other cases, all are treated as NG. 36. On Timer (On/Off Timer) Time (Command: f d) Set On Timer. Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
1. f1h to f4h(read one index) f1: read 1st index of On Time List f2: read 2nd index of On Time List f3: read 3rd index of On Time List f4: read 4th index of On Time List 2. e1h~e4h(delete one index), e0h(delete all indexes) e0: delete all indexes of On Time List e1: delete 1st index of On Time List e2: delete 2nd index of On Time List e3: delete 3rd index of On Time List e4: delete 4th index of On Time List 3. 01h to 80h (write) (Day of Week) bit0 (01h) : Monday bit1 (02h) : Tuesday bit2 (04h) : Wednesday bit3 (08h) : Thursday bit4 (10h) : Friday E N E G N L G S H I EXTERNAL CONTROL DEVICE SETUP 51 bit5 (20h) : Saturday bit6 (40h) : Sunday bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of On Time List ex2: fd 01 e1 ff ff - when you delete 1st index of On Time List ex3: fd 01 3f 02 03 - when you write one On Time Data, "Monday to Saturday, 02:03"
Acknowledgement
[d][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
37. Off Timer (On/Off Timer) Time (Command: f e) Set Off Timer. Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data 1]
1. f1h to f4h(read one index) f1: read 1st index of Off Time List, f2: read 2nd index of Off Time List f3: read 3rd index of Off Time List f4: read 4th index of Off Time List 2. e1h to e4h(delete one index), e0h(delete all indexes) e0: delete all indexes of Off Time List e1: delete 1st index of Off Time List e2: delete 2nd index of Off Time List e3: delete 3rd index of Off Time List e4: delete 4th index of Off Time List 3. 01h to 80h (write) (Day of Week) bit0 (01h) : Monday bit1 (02h) : Tuesday bit2 (04h) : Wednesday bit3 (08h) : Thursday bit4 (10h) : Friday bit5 (20h) : Saturday bit6 (40h) : Sunday bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes) 52 EXTERNAL CONTROL DEVICE SETUP E N E G N L G S H I
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of Off Time List ex2: fd 01 e1 ff ff - when you delete 1st index of Off Time List ex3: fd 01 3f 02 03 - when you write one Off Time Data, "Monday to Saturday, 02:03") Acknowledgement
[e][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
40. Auto Sleep (Command: f g) Set Auto Sleep. Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00 : Off 01 : On Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
38. Scheduling Input select (Command: f u) (Main Picture Input) To select input source for Set depending on day. Transmission
[f][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
[Data 1]
1. f1h to f4h(write/read one index) f1: read 1st index of On Time Input f2: read 2nd index of On Time Input f3: read 3rd index of On Time Input f4: read 4th index of On Time Input
[Data 2]
Input Data(Hex) 02 04 07 08 09 Input AV Component RGB - PC HDMI/DVI - HD - DVD HDMI/DVI - PC
*When you read/delete the current On Time Input,
[Data2] needs to be FFH.
(ex1: fu 01 f1 ff - when you read 1st index of On Time Input. ex2: fu 01 f3 02 - when you write one On Time Input Data in to 3rd index, "AV") Acknowledgement
[u][ ][Set ID][ ][OK][Data1][Data2][x]
39. Sleep Time (Command: f f) Set Sleep Time. Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data 00 : Off 01 : 10 02 : 20 03 : 30 04 : 60 05 : 90 06 : 120 07 : 180 08 : 240 Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
41. Power On Delay (Command: f h) Set the schedule delay when the power is turned on
(Unit: second). Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data : 00H to 64H (Data value)
* Refer to 'Real data mapping . See p.46 Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
42. Language (Command: f i) Set the OSD language. Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data 00 : English 01 : French 02 : German 03 : Spanish 04 : Italian 05 : Portuguese 06 : Chinese 07 : Japanese 08 : Korean 09 : Russian Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
43. DPM Select (Command: f j) Set the DPM (Display Power Management) function. Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00 : Off 01 : On Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
44. Reset (Command: f k) Set the DPM (Display Power Management) function. Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00 : Picture Reset 01 : Screen Reset 02 : Factory Reset EXTERNAL CONTROL DEVICE SETUP 53 Data 20H : AV 40H : Component 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) E N E G N L G S H I Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
45. Power saving (Command: f l) To set the Power saving mode. Transmission
[f][l][ ][Set ID][ ][Data][Cr]
Data 00 : Off 01 : static level 1 02 : static level 2 03 : static level 3 Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
46. Power Indicator (Command: f o) To set the LED for Power Indicator Transmission
[f][o][ ][Set ID][ ][Data][Cr]
Data 00 : Off 01 : On Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
47. Serial no.Check (Command: f y) Check the Serial no. Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF (to read the serial numbers) Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
* The data format is ASCII Code. 48. S/W Version (Command: f z) Check the software version. Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FFH : Read Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
49. Input Select (Command: x b) To select input source for the Set. Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV 40H : Component 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
54 EXTERNAL CONTROL DEVICE SETUP E N E G N L G S H I Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL Temporary noise is normal when powering ON or OFF this device. Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :
EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950-1
; Radio Frequency Interference
; Electromagnetic Immunity
; Power Line Harmonics
; Voltage Fluctuations
; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO'99 (TCO'99 applied model only) Congratulations!
You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 01 Regulatory Information cont. Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?
The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:
TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-
eating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict standards for disposal. TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**
Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one 02 Regulatory Information cont. exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________
* Bio-accumulative is defined as substances which accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO03 (TCO03 applied model only) Congratulations!
The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:
Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields 03 Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/about/environment/html/Recycling.jsp Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-
Hndler oder einen Unternehmensvertreter von LG. 04 Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp Franais Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :
http://www.lge.com/about/environment/html/Recycling.jsp Regulatory Information cont. Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/about/environment/html/Recycling.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que 05 respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/about/environment/html/Recycling.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar Regulatory Information cont. especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-
vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian 1994 LGE
' LG ',
. 06 Regulatory Information cont. K LGE
. LG.
http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne 2002/96/EC. 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-
ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques ventuels pour l'environnement et la sant humaine. 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce produit. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di 08 un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 2.Kaikki elektroniset laitteet ovat ongelmajtett, 1. joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten
, E O 2002/96/EOK. 2.H
. 3.H
. 4.
. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 09 Regulatory Information cont. Portuguese Hungarian Polish 10 Slovak Czech Croatian Regulatory Information cont. Estonian Latvian Lithuanian 11
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-04-26 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-04-26
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
65VS10
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/10/2011 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Gumi University EMC Center
|
||||
1 | Name |
T****** P********
|
||||
1 | Telephone Number |
82544********
|
||||
1 | Fax Number |
82544********
|
||||
1 |
t******@kumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC