all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users manual | Users Manual | 2.51 MiB | ||||
1 | Block Diagram | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Schematics | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users manual | Users Manual | 2.51 MiB |
E N G L I S H OWNERS MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL E1941T E1941S E2041T E2041S E2241T E2241S E2341T E2441T E2541T www.lg.com Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not Open the Display:
There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. 1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and humidity. For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. 2 Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 3 Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord DVI-D Signal Cable
(Only E1941T/E2041T/E2241T/
E2341T/E2441T/E2541T)
(This feature is not available in all countries.) 15-pin D-Sub Signal Cable
(To set it up, this signal cable may be attached to this product before shipping out.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it click. 3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. Stand Body Hinge Body Stand Body Stand Base 4. Use a coin on the back of the stand base and turn the screw clockwise to tighten. 5. Once assembled take the monitor up carefully and face the front side. Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 5 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflat surface. 2. Place the monitor face Down on the cushion or soft cloth. 3.Remove the Stand Body and Stand Base from product in correct direction as shown in the picture. 4. Use a coin on the back of the Stand Base and turn the screw anticlock-
wise to loosen. 6 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display
-After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5 to 15 Do not touch or press the screen when adjusting the angle of the monitor. When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. 7 Connecting the Display E1941T/E2041T/E2241T/E2341T/E2441T/E2541T Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable and power cord in order, then tighten the screw system, and other attached devices is turned off. 1 2 of the signal cable. A B Connect DVI-D(Digital signal) Cable Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. Varies according to model. Wall-outlet type 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode) Power Button NOTE Self Image Setting Function? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. AUTO Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 8 Connecting the Display E1941S/E2041S/E2241S Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable and power cord in order, then tighten the screw system, and other attached devices is turned off. 1 2 of the signal cable. A Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. Varies according to model. Wall-outlet type 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. Power Button NOTE Self Image Setting Function? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. AUTO Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 9 Control Panel Functions Front Panel Controls MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message
"OSD UNLOCKED" should appear. 10 Control Panel Functions SUPER ENERGY SAVING Button Use this button to enter SUPER ENERGY SAVING menu.For more information, refer to page 16. AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size
(display mode). The best display mode is E1941T/E1941S : 1366 x 768 E2041T/E2041S : 1600 x 900 E2241T/E2241S/E2341T/E2441T/E2541T: 1920 x 1080 INPUT Button
(SOURCE Hot key) When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub.
(Only E1941T/E2041T/E2241T/E2341T/E2441T/E2541T ) EXIT Button Exit the OSD(On Screen Display). Power Button &
Power Indicator Use this button to turn the display on or off. The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode , the power indicator is blinking blue. 11 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps:
1 2 3 4 Press the discretionary Button, then the main menu of the OSD appears. To access a control, use the corresponding Buttons. Use the / / Buttons to adjust the image to the desired level. Use the Button to select other sub-menu items. Press the EXIT Button to exit from the OSD. 12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. DSUB DVI-D
: D-SUB(Analog signal) input
: DVI-D(Digital signal) input Main menu Sub-menu Supported input Description MENU SUPER ENERGY SAVING BRIGHTNESS ORIGINAL RATIO COLOR TEMP
(PRESET / USER) CONTRAST LANGUAGE FACTORY RESET ON OFF RESET To adjust the brightness of the screen DSUB DVI-D To adjust the image size To customize the color of the screen To adjust the contrast of the screen To customize the screen status for a user's operating environment DSUB DVI-D Turn on the SUPER ENERGY SAVING function. Turn off the SUPER ENERGY SAVING function. Initialize the SUPER ENERGY SAVING and set to "OFF" mode. NOTE The order of icons may differ depending on the model (13~18). 13 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description To adjust the brightness of the screen. WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original.
* This function works only if input resolution is lower than monitor ratio
(16:9). PRESET Select the screen color. WARM : Set the screen to warm color temperature . MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature. USER RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. Exit : Exit
: Move
: Select another sub-menu 14 On Screen Display(OSD) Selection and Adjustment Main menu Description To adjust the contrast of the screen. To choose the language in which the control names are displayed. Restore all factory default settings except
"LANGUAGE."
Press the , buttons to reset immediately. 15 Exit : Exit
: Move
: Select another sub-menu On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the SUPER ENERGY SAVING Button, then the main menu of the OSD appears. Menu Name Icons Sub-menus Button Tip Exit Move Restart to select sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description ON OFF Turn on the SUPER ENERGY SAVING fuction. When current setting value is ON,the SUPER SAVING color is green. Turn off the SUPER ENERGY SAVING function.Now the monitor is LED SAVING function. When current setting value is OFF,the SUPER SAVING color is gray. RESET Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values. Exit : Exit
: Move
: Select another sub-menu OK : Select TOTAL POWER REDUCTION : How much power is saved during using the monitor. TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2. 17 On Screen Display(OSD) Selection and Adjustment NOTE SAVING DATA(W/h):
19 inch 20 inch 22 inch 23 inch 24 inch 25 inch SUPER SAVING LED SAVING 3 3 3 18 4 15 5 12 5 17 5 12 Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes broadcast video signal. LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. 18 Troubleshooting Check the following before calling for service. No image appears No image appears G Is the power cord of the display connected?
Check and see if the power cord is connected properly to the power outlet. G Is the power indicator Press the Power button. light on?
G Is the power indicator flickering?
G Do you see an "OUT OF RANGE" message on the screen?
G Do you see a "CHECK SIGNAL CABLE"
message on the screen?
If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display again. This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen?
G Do you see OSD LOCKED when you push MENU button?
You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message OSD UNLOCKED will appear. 19 Troubleshooting Display image is incorrect G Display Position is incorrect. Press the AUTO button to automatically adjust your display image to the ideal setting. G On the screen background, vertical bars or stripes are visible. G Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO button to automatically adjust your display image to the ideal setting. Press the AUTO button to automatically adjust your display image to the ideal setting. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits
(true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. 20 Troubleshooting Display image is incorrect G The screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel - Settings. G The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
G Have you installed the display driver?
Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function. 21 Specifications E1941T Display Sync Input Video Input Resolution 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 mm x 0.300 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 61 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1366 x 768 @ 60 Hz VESA 1366 x 768 @ 60 Hz Plug&Play DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode 18 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 44.3 cm ( 17.44 inch ) Height 35.0 cm ( 13.78 inch ) Depth 16.6 cm ( 6.54 inch ) Without Stand Width 44.3 cm ( 17.44 inch ) Height 28.5 cm ( 11.22 inch ) 5.5 cm ( 2.16 inch ) Depth Weight(excl. packing) 2.4 kg ( 5.29 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 0.8 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 22 Specifications E1941S Display Sync Input Video Input Resolution 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 mm x 0.300 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 61 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Signal Input Input Form Max Recommend 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) VESA 1366 x 768 @ 60 Hz VESA 1366 x 768 @ 60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode 18 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 44.3 cm ( 17.44 inch ) Height 35.0 cm ( 13.78 inch ) Depth 16.6 cm ( 6.54 inch ) Without Stand Width 44.3 cm ( 17.44 inch ) Height 28.5 cm ( 11.22 inch ) Depth 5.5 cm ( 2.16 inch ) Weight(excl. packing) 2.4 kg ( 5.29 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 0.8 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 23 Specifications E2041T Display Sync Input Video Input Resolution 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 mm x 0.2766 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz Plug&Play DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode 20 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 47.6 cm ( 18.74 inch ) Height 36.4 cm ( 14.33 inch ) Depth 16.6 cm ( 6.54 inch ) Without Stand Width 47.6 cm ( 18.74 inch ) Height 30.3 cm ( 11.92 inch ) 5.7 cm ( 2.24 inch ) Depth Weight(excl. packing) 2.7 kg ( 5.95 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 24 Specifications E2041S Display Sync Input Video Input Resolution 50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 mm x 0.2766 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Signal Input Input Form Max Recommend 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) VESA 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode 20 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 47.6 cm ( 18.74 inch ) Height 36.4 cm ( 14.33 inch ) Depth 16.6 cm ( 6.54 inch ) Without Stand Width 47.6 cm ( 18.74 inch ) Height 30.3 cm ( 11.92 inch ) Depth 5.7 cm ( 2.24 inch ) Weight(excl. packing) 2.7 kg ( 5.95 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 25 Specifications E2241T Display Sync Input Video Input Resolution 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 mm x 0.248 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug&Play DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode 24 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 50.9 cm ( 19.80 inch ) Height 38.8 cm ( 15.27 inch ) Depth 16.6 cm ( 6.54 inch ) Without Stand Width 50.9 cm ( 19.80 inch ) Height 32.2 cm ( 12.67 inch ) 5.8 cm ( 2.28 inch ) Depth Weight(excl. packing) 2.9 kg (6.39 lb) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 26 Specifications E2241S Display Sync Input Video Input Resolution 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 mm x 0.248 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Signal Input Input Form Max Recommend 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode 24 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 50.9 cm ( 19.80 inch ) Height 38.8 cm ( 15.27 inch ) Depth 16.6 cm ( 6.54 inch ) Without Stand Width 50.9 cm ( 19.80 inch ) Height 32.2 cm ( 12.67 inch ) Depth 5.8 cm ( 2.28 inch ) Weight(excl. packing) 2.9 kg ( 6.39 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 27 Specifications E2341T Display Sync Input Video Input Resolution 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 58.4 cm 0.265 mm x 0.265 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug&Play DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode 28 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 54.6 cm ( 21.49 inch ) Height 40.7 cm ( 16.02 inch ) Depth 17.9 cm ( 7.04 inch ) Without Stand Width 54.6 cm ( 21.49 inch ) Height 34.2 cm ( 13.46 inch ) 5.7 cm ( 2.24 inch ) Depth Weight(excl. packing) 3.4 kg ( 7.49 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 28 Specifications E2441T Display Sync Input Video Input Resolution 60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 60.97 cm 0.277 mm x 0.277 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug&Play DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode 25 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 56.9 cm ( 22.40 inch ) Height 41.9 cm ( 16.49 inch ) Depth 17.9 cm ( 7.04 inch ) Without Stand Width 56.9 cm ( 22.40 inch ) Height 35.4 cm ( 13.93 inch ) Depth 5.9 cm ( 2.32 inch ) Weight(excl. packing) 4.0 kg ( 8.81 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.2 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 29 Specifications E2541T Display Sync Input Video Input Resolution 63.44 cm (25 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 63.44 cm 0.288 mm x 0.288 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Plug&Play DDC 2B(Analog,Digital) Power Consumption On Mode Sleep Mode Off Mode 33 W(Typ.)
< 0.3 W
< 0.3 W Dimensions
& Weight With Stand Width 59.4 cm ( 23.38 inch ) Height 43.4 cm ( 17.08 inch ) Depth 17.9 cm ( 7.04 inch ) Without Stand Width 59.4 cm ( 23.38 inch ) Height 37.1 cm ( 14.60 inch ) Depth 6.1 cm ( 2.40 inch ) Weight(excl. packing) 4.4 kg ( 9.70 lb ) Range Tilt : -5 to 15 Power Input AC 100-240 V~ 50 / 60 Hz 1.2 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 30 Specifications Preset Modes (Resolution) E1941T/E1941S
*If you can't select 1366 x 768 in display property timing option, please update your video card driver from your video card vendor. Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) Polarity(H/V) 1 2 3 4 5 6 7
*8 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1366 x 768 31.468 31.469 37.500 37.879 46.875 49.725 48.363 47.712 70 60 75 60 75 75 60 60
*Recommend Mode E2041T/E2041S Display Modes (Resolution) 1 2 3 4 5 6 7 8
*9 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1600 x 900 Horizontal Freq. (kHz) Vertical Freq. (Hz) Polarity(H/V) 70 60 75 60 75 60 75 75 60
*Recommend Mode 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 60.000 31 Specifications E2241T/E2241S/E2341T/E2441T/E2541T Display Modes (Resolution) Horizontal Freq. (kHz) 1 2 3 4 5 6 7 8 9 10 11
*12 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.500 Vertical Freq. (Hz) Polarity(H/V) 70 60 75 60 75 60 75 75 60 75 60 60
*Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode LED Color Blue Blue Blinking Off 32 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Remove the Stand Body and Stand Base from product in correct direction as shown in the picture. 33 Installing the Wall mount plate 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.
<Screw Mounting Interface Dimension>
Hole spacing : 75 mm x 75 mm. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below.
* 784.8 mm and under (30.9 inch)
- Wall Mount Pad Thickness : 2.6 mm
- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm
* 787.4 mm and above (31.0 inch)
- Please use VESA standard wall mount pad and screws. 34 Make sure to read the Safety Precautions before using the product. Keep the OWNERS MANUAL(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-05-17 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-05-17
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@nemko.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
E2541TX
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** H********
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Audix Technology (Shanghai) Co., Ltd.
|
||||
1 | Name |
B******** K****
|
||||
1 | Physical Address |
3F 34Bldg 680 Guiping Rd., Caohejing Hi-Tech Park
|
||||
1 |
Shanghai, 200233
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-2******** Extension:
|
||||
1 | Fax Number |
+86-2********
|
||||
1 |
b******@audix.com.cn
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Audix Technology (Shanghai) Co., Ltd.
|
||||
1 | Name |
A******** H****
|
||||
1 | Physical Address |
3F 34Bldg 680 Guiping Rd., Caohejing Hi-Tech Park
|
||||
1 |
Shanghai, 200233
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-2******** Extension:
|
||||
1 | Fax Number |
+86-2********
|
||||
1 |
a******@audix.com.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Audix Technology ( Shanghai ) Co., Ltd.
|
||||
1 | Name |
B****** K****
|
||||
1 | Telephone Number |
021-6********
|
||||
1 | Fax Number |
021-6********
|
||||
1 |
b******@audix.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 20 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC