all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual 1 of 2 | Users Manual | 2.63 MiB | ||||
1 |
|
User manual 2 of 2 | Users Manual | 2.63 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual 1 of 2 | Users Manual | 2.63 MiB |
LCD TV / DVD Combo OWNERS MANUAL 26LG40 32LG40 Please read this manual carefully before operating your set and retain it for future reference. Write the model number and serial number from the label on the back cabinet on the front or back of this manual. CAUTION - CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner LG Electronics USA, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. P/NO : SAC31712401 (0805-REV03) www.lgusa.com / www.lg.ca WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-
ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE TO CABLE/TV INSTALLER CAUTION This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product A SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 2 Do not use this apparatus near water. Clean only with dry cloth. 7 Only use attachments/accessories specified by the manufacturer. 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus com-
bination to avoid injury from tip-over. 4 5 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 1 SAFETY INSTRUCTIONS Never touch this apparatus or antenna during a thunder or lighting storm. 15 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. CAUTION concerning the Power Cord:
It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). 17 18 19 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC out-
let). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. Keep the product away from direct sunlight. 11 12 13 14 2 22 23 24 MMoovviinngg Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. VVeennttiillaattiioonn Install your TV where there is proper ventila-
tion. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service cen-
ter. 20 AANNTTEENNNNAASS OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis-
charge unit, connection to grounding elec-
trodes and requirements for the grounding electrode. AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700 Ground Clamp Antenna Lead in Wire Electric Service Equipment NEC: National Electrical Code Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductor
(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) 21 CClleeaanniinngg When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. 3 CONTENTS WARNING / CAUTION . A SAFETY INSTRUCTIONS . 1 Input List . 41 Input Label . 42 AV Mode . 43 SIMPLINK . 44 PREPARATION Accessories . 7 Front Panel Information . 8 Back Panel Information . 9 Stand Instruction . 10 Cable Management . 11 Desktop Pedestal Installation . 12 Swivel Stand . 12 Attaching the TV to a Desk . 12 VESA Wall Mounting . 13 Securing the TV to the wall to prevent falling when the TV is used on a stand . 14 Antenna or Cable Connection . 15 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 16 DVD Setup . 19 VCR Setup . 21 Other A/V Source Setup . 23 Audio out Connection . 24 PC Setup . 25 WATCHING TV / CHANNEL CONTROL Remote Control Functions . 32 Turning On TV . 34 Channel Selection . 34 Volume Adjustment . 34 Quick Menu . 35 Initial Setting . 36 On-Screen Menus Selection . 37 Channel Setup
- Auto Scan (Auto Tuning) . 38
- Add / Delete Channel (Manual Tuning) . 39
- Channel Editing . 40 DVD OPERATION Notes on Discs . 46 Selecting Language
- Selecting Audio Language . 48
- Selecting Subtitle Language . 49
- Selecting Disc OSD Language . 50 Parental Control / Ratings
- Parental Control Setup . 51
- Changing the password . 52 Picture Size Control . 53 Digital Audio Output . 54 Dynamic Range Compression (DRC) . 55 Playing a DVD or Video CD . 56 MP3 Operation . 59 Audio CD Operation . 60 JPG File Viewing Options . 61 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 62 Preset Picture Settings
- Picture Mode - Preset . 64
- Color Tone - Preset . 65 Manual Picture Adjustment
- Picture Mode - User Mode . 66
- Picture Mode - Expert Control . 67 Picture Improvement Technology . 68 Advanced Control - Black (Darkness) Level . 69 Advanced Control - Eye Care . 70 Advanced Control - Real Cinema . 71 Picture Reset . 72 Power Indicator . 73 4 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 104 Maintenance . 106 Product Specifications . 107 Programing the Remote Control . 108 IR Code . 111 External Control Through RS-232C . 113 Open Source License . 120 Auto Volume Leveler (Auto Volume) . 74 Clear Voice . 75 Preset Sound Setting (Sound Mode) . 76 Sound Setting Adjustment - User Mode . 77 Balance . 78 TV Speakers On/Off Setup . 79 Audio Reset . 80 Stereo/SAP Broadcasts Setup . 81 Audio Language . 82 On-Screen Menus Language Selection . 83 Caption Mode
- Analog Broadcasting System Captions . 84
- Digital Broadcasting System Captions . 85
- Caption Option . 86 TIME SETTING Clock Setting
- Auto Clock Setup . 87
- Manual Clock Setup . 88 Auto On/Off Time Setting . 89 Sleep Timer Setting . 90 Auto Shut-off Setting . 91 PARENTAL CONTROL / RATINGS Set Password & Lock System . 92 Channel Blocking . 95 Movie & TV Rating . 96 Downloadable Rating . 101 External Input Blocking . 102 Key Lock . 103 5 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. is a trademark of DVD format/Logo Licensing Corporation. I If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. I Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. I Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 6 PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. R E T U R N V O L F A V M U T E N T E R R OTATE+
T V A V M O D E DIS P L A Y 1 R E P E A T 4 Z O O M 2 A N G L E 3 TITLE MENU 6 S U B TITLE 7 A-B 5 A U DIO 8 0 9 R E T FLASHBK U R N C H P A G E OTATE-
R R E T U R N S KIP +
V O L F A V S T B Q. M E N U P O W E R M E N S E T U U/
P B UIL D T-IN V D V C R IN P U T E N T E R R OTATE+
A V M O D E Copyright 2007 LGE, All Rights Reserved. S KIP -
SLO W -
SLO W +
EJE C T DISC MENU P B C DIS P L A Y 1 R E P E A T 4 Z O O M 2 M U T E C H P A G E A N G L E 3 TITLE MENU 6 S U B TITLE 7 A-B 5 A U DIO 8 0 9 R E T U R N FLASHBK S KIP +
1.5V 1.5V Owners Manual CD Manual Remote Control, Batteries Power Cord x 4 x 4 Bolts for stand assembly Screw for stand fixing Protection Cover
(Refer to P.10)
(Refer to P.12) Cable Management Clip
* Wipe spots on the exterior only with the polishing cloth. Polishing Cloth
(This feature is not available for all models.)
* Do not wipe roughly when removing stains. Excessive pressure may cause scratches or discoloration. OOppttiioonn EExxttrraass D-sub 15 pin Cable When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance. P R E P A R A T O N I 7 PREPARATION FRONT PANEL INFORMATION I Image shown may differ from your TV. I NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). EJECT Button PLAY/PAUSE Button
STOP Button SKIP Button CHANNEL (
) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
(Can be adjusted. Refer to PPoowweerr IInnddiiccaattoorr in the OPTION menu. GG pp..7733) Remote Control Sensor POWER Button CH VOL ENTER MENU INPUT DDiisscc SSlloott::
Insert discs with the label facing towards the front of the TV. Press the disc partially into the slot and the loader will pull the disc from your hand. Do not force the disc into the slot. P R E P A R A T O N I 8 BACK PANEL INFORMATION I Image shown may differ from your TV. R R 11 1 5 3 ANTENNA/
CABLE IN 6 HDMI/DVI IN RGB IN RGB(PC) AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL 7 2 1 4 REMOTE CONTROL IN RS-232C IN
(CONTROL & SERVICE) AUDIO OUT VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO MONO
( ) AUDIO
( ) 8 9 1 N I V A 10 1 9 B S U Y L N O E C U V R E S 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 1 2 3 4 5 6 2 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red and white for audio. RGB (PC) Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable). AUDIO (RGB/DVI) 1/8 headphone jack for analog PC audio input. REMOTE CONTROL IN PORT For a wired remote control. RS-232C IN (CONTROL & SERVICE) Used by third party devices. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 7 8 9 10 11 DIGITAL AUDIO OUT OPTICAL Digital audio output for use with amps and home theater systems. Includes an optical connection. Note: In standby mode, these ports do not work. AUDIO OUT Analog audio output for use with amps and home theater systems. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). S-VIDEO Better quality than standard composition. Supports standard definition video only (480i).
( ) USB SERVICE ONLY Used for software updates. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. P R E P A R A T O N I 9 PREPARATION STAND INSTRUCTION I Image shown may differ from your TV. INSTALLATION DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the SSTTAANNDD BBOODDYY with CCOOVVEERR BBAASSEE of the TV. 2 Loose the bolts from TV. SSTTAANNDD BBOODDYY CCOOVVEERR BBAASSEE 3 Assemble the TV as shown. 3 Detach the stand from TV. 4 Fix the 4 bolts securely using the holes in the back of the TV. PROTECTION COVER After removing the stand, install the included pprrootteeccttiioonn ccoovveerr over the hole for the stand. Press the PPRROOTTEECCTTIIOONN CCOOVVEERR into the TV until you hear it click. And push the tab aside. NOTE
GG When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installa-
tion). Do not over tighten. P R E P A R A T O N I 10 CABLE MANAGEMENT I Image shown may differ from your TV. 1 Align the hole with the tab on the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP. Turn the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP as shown. Note: This cable management clip can be bro-
ken by excessive pressure. 2 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. P R E P A R A T O N I 11 PREPARATION DESKTOP PEDESTAL INSTALLATION I Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches P R E P A R A T O N I CAUTION GG Ensure adequate ventilation by following the clearance recommendations. GG Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ATTACHING THE TV TO A DESK The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially caus-
ing injury or damaging the TV. Stand Desk 1-Screw
(provided as parts of the product) WARNING GG To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. 12 VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. AA BB Model VESA
(A * B) Standard Screw Quantity 26LG40, 32LG40 200 * 100 M4 4 Product LCD TV
NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the instruc-
tions included with the mount. GG Standard dimensions for wall mount kits are shown in the table. GG When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. GG Do not use screws longer then the standard dimen-
sion, as they may cause damage to the inside to the TV. GG For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifica-
tions. GG Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents. GG LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installa-
tion instructions. CAUTION GG Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock. P R E P A R A T O N I 13 PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND I You should purchase necessary components to prevent TV from falling off of the stand. I Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE
GG Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. GG To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same. P R E P A R A T O N I 14 I To prevent damage do not connect to the power outlet until all connections are made between the devices. R R P R E P A R A T O N I ANTENNA/
CABLE IN R
( ) ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust the antenna direction if needed. Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments
(Connect to wall antenna socket) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the copper wire when connecting the antenna.
( ) ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance.
( ) 15 EXTERNAL EQUIPMENT SETUP I To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive digital over-the-air or digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-
top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the TV. 2. How to use I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box. operation) I Select the CCoommppoonneenntt input source on the TV using the IINNPPUUTT button on the remote control. 2 1 RGB(PC) AUDIO
(RGB/DVI) A RS-232C
(CONTROL & S REMOTE CONTROL IN VIDEO COMPONENT IN AUDIO S-VIDEO
( ) 1 2 Y PB PR L R Supported Resolutions Y, CB/PB, CR/PR Signal 480i 480p 720p 1080i 1080p Component HDMI Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Yes Yes Yes Yes Yes No Yes Yes Yes Yes 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.43 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.94 24.00 29.97 30.00 59.94 60.00
( ) E X T E R N A L E Q U I P M E N T S E T U P 16 HDMI Connection 1. How to connect 1 2 Connect the digital set-top box to HHDDMMII//DDVVII IINN11, 22, or 33 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use
( ) I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) I Select the HHDDMMII11, HHDDMMII22, or HHDDMMII33 input source on the TV using the IINNPPUUTT button on the remote control. HDMI/DVI IN RGB IN RGB(PC) AUDIO
(RGB/DVI) 2 1 RS-23
(CONTROL REMOTE CONTROL IN VIDEO COMPONENT IN AUDIO S-VID 1 HDMI-DTV OUTPUT HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 1280x720p 1920x1080i
( ) 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.939 60.00 E X T E R N A L E Q U I P M E N T
( ) S E T U P 17 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection HDMI/DVI IN RGB IN RGB(PC) AUDIO
(RGB/DVI) DIGITAL AUDIO OU OPTICA 2 1 RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO ( ) 1 2 1. How to connect DVI-DTV OUTPUT L R 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN11, 22, or 33 jack on the TV. Connect the PC audio output to the AAUUDDIIOO ((RRGGBB//DDVVII)) jack on the TV. 2. How to use I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) I Select the HHDDMMII 11, HHDDMMII 22 or HHDDMMII 33 input source on the TV using the IINNPPUUTT button on the remote control.
NOTE GG A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary. E X T E R N A L E Q U I P M E N T S E T U P 18 DVD SETUP Component Connection 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 1 RS-23
(CONTROL &
REMOTE CONTROL IN Connect the audio outputs of the DVD to the CCOOMMPPOO--
NNEENNTT IINN AAUUDDIIOO jacks on the TV. VIDEO COMPONENT IN AUDIO S-VIDE 1 2 2. How to use I Turn on the DVD player, insert a DVD. 1 2 I Select CCoommppoonneenntt input source by using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. Y PB PR L R Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L
( ) E Q U I P M E N T S E T U P 19 EXTERNAL EQUIPMENT SETUP S-Video Connection 1. How to connect 1 2 Connect the S-VIDEO output of the DVD to the SS --
VVIIDDEEOO input on the TV. S-VIDEO AUDIO L R Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the TV. 2. How to use I Turn on the DVD player, insert a DVD. I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. ANTENNA/
CABLE IN 2 1 RGB IN GB(PC) AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT REMOTE CONTROL IN AUDIO T IN S-VIDEO S-VIDEO
) AUDIO
VIDEO MONO 1 N I V A HDMI Connection 1. How to connect 1 2 Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN 11, 22, or 33 jack on the TV. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use
( ) I Select the HHDDMMII 11, 22, or 33 input source on the TV using the IINNPPUUTT button on the remote control. I Refer to the DVD player's manual for operating instructions. HDMI/DVI IN RGB IN RGB(PC) AUDIO
(RGB/DVI) 2 1 RS-23
(CONTROL REMOTE CONTROL IN VIDEO COMPONENT IN AUDIO S-VID
( ) 1 HDMI-DVD OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 20 VCR SETUP
( ) I To avoid picture noise (interference), leave an adequate distance between the VCR and TV. I If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. Antenna Connection ANTENNA/
CABLE IN AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL 1 RS-232C IN
(CONTROL & SERVICE) AUDIO OUT TE L IN S-VIDEO
) AUDIO
VIDEO MONO 1 N I V A ANT OUT S-VIDEO VIDEO L R ANT IN OUTPUT SWITCH Wall Jack 2 Antenna 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the AANNTTEENNNNAA//CCAABBLLEE IINN socket on the TV. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use I Set VCR output switch to 3 or 4 and then tune TV to the same channel number. I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)
( ) E X T E R N A L E Q U I P M E N T S E T U P 21 EXTERNAL EQUIPMENT SETUP
( ) Composite (RCA) Connection 1. How to connect ANT IN S-VIDEO VIDEO L R 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) ANT OUT OUTPUT SWITCH 2. How to use 1 ANTENNA/
CABLE IN I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN22, select AAVV22 input source on the TV. RGB IN GB(PC) AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT
( ) REMOTE CONTROL IN
NOTE GG If you have a mono VCR, connect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the TV. AUDIO T IN S-VIDEO VIDEO
) AUDIO
MONO 1 N I V A S-Video Connection 1. How to connect 1 2 Connect the S-VIDEO output of the VCR to the SS --
VVIIDDEEOO input on the TV. Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the TV. 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) I Select the AA VV 11 input source on the TV using the IINNPPUUTT button on the remote control. ANT IN S-VIDEO VIDEO L R ANT OUT OUTPUT SWITCH ANTENNA/
CABLE IN RGB IN RGB(PC) AUDIO 1
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL 2 REMOTE CONTROL IN RS-232C IN
(CONTROL & SERVICE) AUDIO OUT
( ) AUDIO ENT IN S-VIDEO
) AUDIO
VIDEO MONO 1 N I V A CAUTION GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.
NOTE GG The picture quality is improved:
compared to normal composite
(RCA cable) input. E X T E R N A L E Q U I P M E N T S E T U P 22 OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use I Select the AA VV 22 input source on the TV using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN11 input, select the AA VV 11 input source on the TV. I Operate the corresponding external equipment. Camcorder Video Game Set VIDEO L R 1 N I B S U 3 N I I M D H R I O D U A O N O M L
O E D V I AV IN 2 E X T E R N A L E Q U I P M E N T S E T U P 23 EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION Send the TVs audio to external audio equipment via the Audio Output port.
( C)
(RGB/DVI) OPTICAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT REMOTE CONTROL IN AUDIO N S-VIDEO
) AUDIO
VIDEO MONO
( ) 1 N I V A 1 L R AUDIO ANTENNA/
CABLE IN GB IN C) AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT 1 REMOTE CONTROL IN AUDIO S-VIDEO
) AUDIO
VIDEO MONO 1 N I V A 2 Analog 1. How to connect 1 2 Connect audio outputs to the TVs AAUUDDIIOO OOUUTT jacks. Set the TV Speaker option - Off in the AUDIO menu.
(GG pp..7799). See the external audio equipment instruction manual for operation. Digital 1. How to connect 1 2 3 Connect one end of the optical cable to the TVs OOPPTTII--
CCAALL port of DDIIGGIITTAALL AAUUDDIIOO OOUUTT. Connect the other end of the optical cable to the digital audio input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (GG pp..7799). See the external audio equipment instruction manu-
al for operation.
NOTE GG When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (GG pp .. 77 99) CAUTION G Do not look into the optical output port. Looking at the laser beam may damage your vision. GG Composite audio out (the red and white jacks) only works with composite inputs. Use optical audio output for any type of DTV signal. E X T E R N A L E Q U I P M E N T S E T U P 24 PC SETUP This TV provides Plug and Play capability, no display driver is needed. VGA (D-Sub 15 pin) Connection 1. How to connect HDMI/DVI IN RGB IN RGB(PC) AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL 1 2 Connect the VGA output of the PC to the RR GG BB ((PP CC)) jack on the TV. RS-232C IN
(CONTROL & SERVICE) A REMOTE CONTROL IN Connect the PC audio output to the AA UU DD II OO
((RRGGBB//DDVVII)) jack on the TV. VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO M( ) 2. How to use I Turn on the PC and the TV. I Select the RRGGBB--PPCC input source on the TV using the IINNPPUUTT button on the remote control. 1 2 RGB OUTPUT AUDIO
( ) E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect 1 2 Connect the DVI output of the PC to the HHDDMMII//DDVVII II NN 11, 22, or 33 jack on the TV. HDMI/DVI IN RGB IN RGB(PC) AUDIO
(RGB/DVI) DIGIT AUDIO OPTIC Connect the PC audio output to the AA UU DD II OO
((RRGGBB//DDVVII)) jack on the TV. 2 1 RS-232C IN
(CONTROL & SERVICE) REMOTE CONTROL IN 2. How to use I Turn on the PC and the TV. I Select the HHDDMMII 11, HHDDMMII 22 or HHDDMMII 33 input source on the TV using the IINNPPUUTT button on the remote control. VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO ( ) 1 2 DVI-PC OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 26
NOTES GG To get the the best picture quality, adjust the PC graphics card to 1360x768. ness and contrast on the PICTURE menu until the picture is clear. GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-
ness. If noise is present, run Auto Config. in the Screen (RGB-PC) menu. You may also try changing the PC output to another resolution, change the refresh rate to another rate or adjust the bright-
GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. GG The synchronization input form for Horizontal and Vertical frequencies is separate. Supported Display Specifications (RGB-PC, HDMI-PC) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.469 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768 31.469 31.469 37.879 48.363 47.776 47.720 47.130 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65
* Only RGB-PC mode E X T E R N A L E Q U I P M E N T S E T U P 27 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The PPoossiittiioonn, PPhhaassee, and SSiizzee can also be adjusted. PICTURE Move Enter SCREEN Move MENU Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Resolution G Auto config. Position Size Phase Reset Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select RReessoolluuttiioonn. Select the desired resolution. 1 MENU/
SET UP 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 28 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. PICTURE Move Enter SCREEN Move MENU Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Resolution Auto config. G Position Size Phase Reset To Set Yes No 1 MENU/
SET UP Select PPIICCTTUURREE. 2 3 4 5 ENTER ENTER Select SSccrreeeenn ((RRGGBB--PPCC)). Select AAuuttoo ccoonnffiigg... ENTER Select YY ee ss. ENTER Start Auto Configuration. I If the position of the image is still not correct, try Auto adjustment again. I If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the PP oo ss ii tt ii oo nn, SS ii zz ee or PPhhaassee. E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE Move Enter SCREEN Move MENU Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Resolution Auto config. Position G Size Phase Reset F D E G 1 MENU/
SET UP 2 3 4 5 ENTER ENTER ENTER ENTER Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select PPoossiittiioonn, SS ii zz ee, or PPhhaassee. Make appropriate adjustments. I PPoossiittiioonn: This function is to adjust pic-
ture to left/right and up/down as you prefer. I SS ii zz ee: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. I PPhhaassee: This function allows you to remove any horizontal noise and clear or sharpen the image of characters. E X T E R N A L E Q U I P M E N T S E T U P 30 Screen Reset (Reset to original factory values) Returns PPoossiittiioonn, SS ii zz ee, and PPhhaassee to the default factory settings. This feature operates only in RGB-PC mode. PICTURE Move Enter SCREEN Move MENU Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Resolution Auto config. Position Size Phase Reset G To set Yes No Select PPIICCTTUURREE. Select SSccrreeeenn ((RRGGBB--PPCC)). Select RReesseett. Select YY ee ss. 1 MENU/
SET UP 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 31 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. TV/STB/VCR
/BUILT-IN DVD Select the remote operating mode: TV, STB, VCR, or BUILT-IN DVD. POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. GG pp..3355 TV POWER BUILT-IN DVD STB Q. MENU MENU/
SETUP VCR INPUT MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu.
E T A T O R ENTER R O T A T E
INPUT External input modes rotate in regular sequence. RETURN AV MODE VOLUME UP
/DOWN Increase/decrease the sound level. FAV Scroll through the programmed Favorite channels. GG pp..3355 MUTE Switch the sound on or off. GG pp..3344 CHANNEL UP/DOWN PAGE UP/DOWN NUMBER button
(DASH) Select available channels. Move from one full set of screen information to the next one. Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed. VCR, SIMPLINK Control buttons Control video cassette recorders. Control the SIMPLINK compatible devices. DVD Control buttons Controls the Built-In DVD Operation. For further details, see the DVD Operation section. GG pp..4466--6611 FAV VOL MUTE CH P A G E DISPLAY 1 REPEAT 4 SUBTITLE 7 PBC ZOOM 2 A-B 5 AUDIO 8 0 ANGLE 3 TITLE MENU 6 9 RETURN FLASHBK SKIP -
SKIP +
SLOW -
SLOW +
EJECT DISC MENU W A T C H I N G T V
C H A N N E L C O N T R O L 32 THUMBSTICK
(Up/Down/Left Right/ENTER) RETURN Navigate the on-screen menus and adjust the system settings to your preference. Allows the user to move return one step in an interactive application or other user interac-
tion function. Also closes menus. SIMPLINK See a list of SIMPLINK compatible devices connected to the TV. When you press this button, the SIMPLINK menu appears at the screen. GG pp..4444--4455 AV MODE Toggles through preset picture and audio settings. GG pp..4433 Blue Color Button The recommands printed on the remote in blue are active when in Built-In DVD mode. For further details, see the DVD Operation section. GG pp..4466--6611 Installing Batteries I Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). I Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. I Close cover. W A T C H I N G T V
C H A N N E L C O N T R O L 33 WATCHING TV / CHANNEL CONTROL TURNING ON TV 1 2 First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the
, IINNPPUUTT, CCHH ((
button on the TV or press the PPOOWWEERR, IINNPPUUTT, CCHH((
NNuummbbeerr ((00~99 )) button on the remote control. or or
)), Select the viewing source by using the IINNPPUUTT button on the remote con-
trol. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. 3 When finished using the TV, press the PPOOWWEERR button on the remote con-
trol. The TV reverts to standby mode.
NOTE GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet. CHANNEL SELECTION 1 Press the CCHH((
or
)) or NNUUMMBBEERR buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. 1 2 3 Press the VVOOLL ((++ or --)) button to adjust the volume. If you want to switch the sound off, press the MMUUTTEE button. You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((++ or --)) button. W A T C H I N G T V
C H A N N E L C O N T R O L 34 QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. I AAssppeecctt RRaattiioo: Selects your desired picture format. I BBaacckklliigghhtt: Adjust the brightness of LCD panel to I CCaappttiioonn: Select on or off. I MMuullttii AAuuddiioo: Changes the audio language (Digital control the brightness of the screen. I CClleeaarr VVooiiccee: By differentiating the human sound range from others, it helps make human voices sound better. I PPiiccttuurree MMooddee: Selects the factory preset picture depend on the viewing environment. I SSoouunndd MMooddee: Selects the factory preset sound for type of program. signal). SSAAPP: Selects MTS sound (Analog signal). I SSlleeeepp TTiimmeerr: Select the amount of time before your TV turns off automatically. I DDeell//AAdddd//FFaavv: Select channel you want to add/delete or add the channel to the Favorite List. Q.Menu Aspect Ratio FF 16:9 GG Backlight Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav CH 3 Off Vivid Standard Off English Off Add Close 1Q. MENU 2 3Q. MENU Display each menu. Make appropriate adjustments. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 35 WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. I Default selection is HH oo mm ee. We recommend setting the TV to HH oo mm ee mode for the best picture in your home environment. I IInn--ssttoorree Mode is only intended for use in retail environments. Customers can adjust the PPiiccttuurree menu
- PPiiccttuurree mmooddee manually while inspecting the TV, but the TV will automatically return to preset in-store mode after 5 minutes. W A T C H I N G T V
C H A N N E L C O N T R O L 36 Step1. Mode Setting Step1. Mode Setting
Selecting the environment. Choose the setting mode you want. In Store Home Enter RETURN Exit Select HH oo mm ee Mode. 1 2 ENTER Step2. Time Setting Step2. Time Setting Current Time Setting FF Auto GG Year Month Date Hour Minute Time Zone Daylight Saving 2007 11 15 5 PM 52 Eastern Off Enter RETURN Exit Select AAuuttoo or MMaannuuaall. 1 2 3 ENTER Step3. Option Setting Step3. Option Setting 1. OSD Language Setting FF English GG 2. Audio Language Setting French Enter RETURN Exit Select OOSSDD LLaanngguuaaggee SSeettttiinngg or AAuuddiioo LLaanngguuaaggee SSeettttiinngg. Select your desired language. 1 2 3 ENTER Step4. Auto Tuning Step4. Auto Tuning Auto Tuning can change channel map. Do you want to start Auto Tuning?
Enter Enter RETURN Exit 1 ENTER Start AAuuttoo TTuunniinngg. Select desired time option.
NOTE I You can also adjust IInniittiiaall SSeettttiinngg in the OOPPTTIIOONN menu. ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. CHANNEL Move Enter PICTURE Move Enter AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G CHANNEL PICTURE AUDIO TIME OPTION LOCK LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Auto Tuning Manual Tuning Channel Edit TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home 1 MENU/
SET UP Display each menu. 2 3 ENTER Select a menu item. ENTER Enter to the pop up menu. 4 MENU/
SET UP Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 37 WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. CHANNEL Move Enter CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit Auto Tuning Manual Tuning Channel Edit Press Yes button to begin auto tuning. Yes No 1 MENU/
SET UP Select CCHHAANNNNEELL. 2 3 4 ENTER ENTER Select AAuuttoo TTuunniinngg. Select YY ee ss. ENTER Run AAuuttoo ttuunniinngg. 5RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. I A password is required to gain access to Auto Tuning menu if the Lock System is turned on. W A T C H I N G T V
C H A N N E L C O N T R O L 38 Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit Auto Tuning Manual Tuning Channel Edit FF DTV GG Select channel type and RF-channel number. Channel DTV 2-1 2 Bad Normal Good Delete Close 1 MENU/
SET UP ENTER ENTER 2 3 4 5 6RETURN MENU/
SET UP Select CCHHAANNNNEELL. Select MMaannuuaall TTuunniinngg. Select DD TT VV, TT VV, CCAADDTTVV, or CC AA TT VV. Select channel you want to add or delete. ENTER Select AA dd dd or DDeelleettee. Return to the previous menu. Return to TV viewing. I A password is required to gain access to Manual Tuning menu if the Lock System is turned on. W A T C H I N G T V
C H A N N E L C O N T R O L 39 WATCHING TV / CHANNEL CONTROL Channel Editing A custom list can be created by toggling each channel on or off with the ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-
right corner of the screen. Add/Delete Move CH Move Page MENU Previous RETURN Exit CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit 1 MENU/
SET UP 2 3 4 ENTER ENTER ENTER 5 MENU/
SET UP Select CCHHAANNNNEELL. Select CChhaannnneell EEddiitt. Select a channel. Select channel you want to add or delete. Return to the previous menu. RETURN Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 40 INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Antenna Cable AV1 AV2 Component 1 INPUT ie) ENTER Select the desired input source. Antenna Cable AV1 AV2 Component HDMI3 HDMI2 HDMI1 RGB-PC Built-In DVD Antenna Cable AV1 AV2 Component Q.MENU Input Label RETURN Exit Disconnected inputs are inactivated (grayed out). Select a desired input source (except BBuuiilltt--IInn DDVVDD, AAnntteennnnaa or CCaabbllee). Then, you can select your desired Input Label with using Q.MENU button. GG pp..4422 I AAnntteennnnaa: Select it to watch over-the-air broadcasts. I CCaabbllee: Select it to watch cable and digital cable. I AA VV: Select them to watch a VCR or other external I BBuuiilltt--IInn DDVVDD: Select it to play DVD. I RRGGBB--PPCC: Select it to view PC input. I HH DD MM II: Select them to watch high definition equipment. devices. I CCoommppoonneenntt: Select them to watch DVD or a Digital set-top box. W A T C H I N G T V
C H A N N E L C O N T R O L 41 WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home AV1 AV2 Component RGB-PC HDMI1 HDMI2 HDMI3 FF GG Close With using OPTION menu With using INPUT button 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP Select OOPPTTIIOONN. Select IInnppuutt LLaabbeell. Select the source. Select the label. Return to the previous menu. Return to TV viewing 1 INPUT 2Q. MENU 3RETURN MENU/
SET UP Select the source. Select the label. Return to the previous menu. Return to TV viewing I When new external device is connected, this popup menu is displayed automatically. If selecting YY ee ss, you can select input source that you want to appreciate. I But, when selecting SSIIMMPPLLIINNKK - OO nn, popup menu for HDMI input will not be displayed.
New external device is connected. Do you want to enjoy this?
Yes No
Select input source that you want to appreciate. AV1 AV2 Component W A T C H I N G T V
C H A N N E L C O N T R O L 42 AV MODE You can select the optimal images and sounds. Off Cinema Game Sport Press the AAVV MMOODDEE button repeatedly to select the desired source. 1AV MODE 2 ENTER I If you select CCiinneemmaa in AV mode, CCiinneemmaa will be selected both for PIC-
TURE menu - Picture Mode and AUDIO menu - Sound Mode respectively. I If you select OO ff ff in AV mode, the PPiiccttuurree MMooddee and SSoouunndd MMooddee return to previous selected value. W A T C H I N G T V
C H A N N E L C O N T R O L 43 WATCHING TV / CHANNEL CONTROL This function operates only with devices with the The TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. To start using SIMPLINK, turn it on in the user menus. logo. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English Off On
: On
: Off
: Off
: 1
: Home 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select OOPPTTIIOONN. Select SSIIMMPPLLIINNKK. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing.
NOTE GG Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIM-
PLINK device with the HDMI cable. GG When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop. GG When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers. GG If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM-
PLINK device with an OPTICAL cable. W A T C H I N G T V
C H A N N E L C O N T R O L 44 SIMPLINK Functions I DDiirreecctt PPllaayy:: After connecting AV devices to the TV, you can directly control the devices and play media with-
out additional settings. I SSeelleecctt AAVV ddeevviiccee:: Enables you to select one of the AV devices connected to TV. I DDiisscc ppllaayybbaacckk:: Control connected AV devices by pressing the I PPoowweerr ooffff aallll ddeevviicceess:: When you power off the TV, all connected devices are turned off. I SSwwiittcchh aauuddiioo--oouutt:: Offers an easy way to switch audio-out. I SSyynncc PPoowweerr oonn:: When you play the connected AV device, TV will automatically turn on.
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function) Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function support should be used. (*CEC:
Consumer Electronics Control).
, ENTER, G, A, ll ll, FF and GG buttons. 1 2 3 Display SSIIMMPPLLIINNKK menu. ENTER Select the desired device. ENTER Control connected AV devices. SIMPLINK Menu 1 2 3 4 5 TTVV vviieewwiinngg: Switch to the previous TV channel regardless of the current mode. DDIISSCC ppllaayybbaacckk: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VVCCRR ppllaayybbaacckk: Control the connected VCR. HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk: Control recordings stored in HDD. AAuuddiioo OOuutt ttoo HHoommee TThheeaatteerr ssppeeaakk--
eerr//AAuuddiioo OOuutt ttoo TTVV: Select Home Theater speaker or TV speaker for Audio Out. 1 2 3 4 5 GG When no device is connected
(displayed in gray) GG Selected Device GG When a device is connected
(displayed in bright color) W A T C H I N G T V
C H A N N E L C O N T R O L 45 DVD OPERATION NOTES ON DISCS Symbol used in this manual may appear on the TV screen during operation. A means that the operation is not permitted by the unit or is not available on the disc. On handling discs I Do not touch the playback side of the disc. D V D O P E R A T O N I 46 Playback side I Do not attach paper or tape to discs. On cleaning discs I Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean. I Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc. On storing discs I Do not store discs in a place subject to direct sunlight or near heat sources. I Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. I Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Structure of disc contents Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. DVD video disc DVD video disc Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Video CD/Audio CD Video CD/Audio CD Track 1 Track 2 Track 3 Track 4 Track 5 Each title, chapter or track is assigned a number, which is called title number, chapter number or track number respectively. There may be discs that do not have these numbers. TTiittllee:: When two or more movies are recorded on a disc, the disc is divided into two or more parts. Each part is called a TITLE. CChhaapptteerr:: The titles can be subdivided into many sections. Each section is called a CHAPTER. TTrraacckk:: An audio CD can contain several items. These are assigned to the tracks. NN oo tt ee If an MP3 or JPG file CD is created using an incorrect method, the player may not be able to recognize it. If this happens, try reburning another CD after setting up the disc writing parameters correctly on your PC. Types of Playable Discs I DVD (8 cm / 12 cm disc) I Video CD (VCD) (8 cm / 12 cm disc) I Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CD-
RW that contains audio titles, MP3, and/or JPG files. Note: Depending on the conditions of the recording equipment or the CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) disc itself, some CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be played on the unit. Regional code of the DVD player and DVDs This DVD player is designed and manufac-
tured for playback of region 11 encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled 11 or AA LL LL. If you try to play any other discs, the message WWrroonngg RReeggiioonn will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. CCAAUUTTIIOONN::
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain for future refer-
ence should the unit require maintenance, contact an authorized service location (see service procedure). Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CCAAUUTTIIOONN:: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you change the input source. NNoottee:: This player does not memorize the scene of a disc if you remove the disc from the player or turn off the TV. D V D O P E R A T O N I 47 DVD OPERATION
NOTE GG Insert a DVD and press STOP button twice to access this DVD setup menu. SELECTING LANGUAGE Selecting Audio Language Select your preferred audio language. If an audio language is selected, the selected audio language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available audio language during playback with the AAUUDDIIOO button on the remote control during playback. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG Original Korean English French German Spanish Italian Chinese Polski Japanese Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG Original Korean English French German Spanish Italian Chinese Polski Japanese 1 MENU/
SET UP 2 3 MENU/
SET UP Select AAuuddiioo LLaanngguuaaggee. Select desired language. Return to normal playback. D V D O P E R A T O N I 48 Selecting Subtitle Language Select your preferred subtitle language. If a subtitle language is selected, the selected subtitle language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available subtitle language with the SSUUBBTTIITTLLEE button on the remote control during playback. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG Original Korean English French German Spanish Italian Chinese Polski Japanese Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG Original Korean English French German Spanish Italian Chinese Polski Japanese 1 MENU/
SET UP 2 3 MENU/
SET UP Select SSuubbttiittllee LLaanngguuaaggee. Select desired language. Return to normal playback. D V D O P E R A T O N I 49 DVD OPERATION Selecting Disc OSD Language The OSD (on screen display) can be shown on the screen in your specified language. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG English Spanish French Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG English Spanish French 1 MENU/
SET UP 2 3 MENU/
SET UP Select MMEENNUU LLaanngguuaaggee. Select desired language. The menus and on screen displays will appear in the selected language. Return to normal playback. D V D O P E R A T O N I 50
1 | User manual 2 of 2 | Users Manual | 2.63 MiB |
PARENTAL CONTROL / RATINGS Parental Control Setup Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. The parental control feature allows you to block access to scenes above the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG 8 Adult 7 NC - 17 6 R 5 PG - r 4 PG - 13 3 PG 2 G 1 Kids Unlock Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG 8 Adult 7 NC - 17 6 R 5 PG - r 4 PG - 13 3 PG 2 G 1 Kids Unlock 1 MENU/
SET UP 2 3 4 MENU/
SET UP Select RRaattiinngg LLeevveell. 3 6 9 1 4 7 2 5 8 0 Input the password. Set the restriction level from 1 to 8. Viewing becomes more restricted as the number increases. Return to normal playback. I 1: Kids I 2: G (General audience) I 3: PG (Parental guidance suggested) I 4: PG-13 (13 years and older) I 5: PG-r I 6: R (Restricted) I 7: NC-17 (18 years and older) I 8: Adult (Adults only) GG Enter the password as requested. GG The TV is set up with the initial pass-
word 0-0-0-0. GG If you ever forget your password, key in 7, 7, 7, 7 on the remote control. I If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is avail-
able on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play-
back stops. You must enter the 4-digit password or change the rating level in order to play the disc. D V D O P E R A T O N I 51 DVD OPERATION Changing the password Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG
Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG
1 MENU/
SET UP 2 3 1 4 7 3 6 9 2 5 8 0 4 MENU/
SET UP Select NNeeww PPaasssswwoorrdd. 3 6 9 1 4 7 2 5 8 0 Input the password. Enter it again when requested. Return to normal playback. D V D O P E R A T O N I 52 PICTURE SIZE CONTROL You can watch TV in various picture formats. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG 4 : 3 LB 4 : 3 PS 16 : 9 Select TTVV SSccrreeeenn. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG 4 : 3 LB 4 : 3 PS 16 : 9 Select 44::33 LLBB, 44::33 PPSS, or 1166::99. I Depending on the disc, the TV screen feature may not be available. I 4:3 LB (Letter Box) Return to normal playback. 1 MENU/
SET UP 2 3 MENU/
SET UP I 4:3 PS (Pan & Scan) I 16:9 D V D O P E R A T O N I 53 DVD OPERATION DIGITAL AUDIO OUTPUT You can select the output for SPDIF (Sony/Philips Digital Interface). Each DVD disc has a variety of audio output options. Set the players AUDIO options according to the type of audio system you use. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG Off Bitstream PCM Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG Off Bitstream PCM 1 MENU/
SET UP 2 3 MENU/
SET UP Select DDiiggiittaall OOuuttppuutt. Select OO ff ff, BBiittssttrreeaamm, or PP CC MM. Return to normal playback. I Bitstream: Select Bitstream if you con-
nect the DVD Players DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, or MPEG decoder. I PCM (Pulse Code Modulation): Select when connected to a two-channel digi-
tal stereo amplifier. DVDs encoded in Dolby Digital, or MPEG will be automat-
ically downmixed to two-channel PCM audio. D V D O P E R A T O N I 54 DYNAMIC RANGE COMPRESSION (DRC) Confines the audio range to prevent excessively loud sound yet allows you to hear the low sounds clearly. Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move GG : Next GG Off On Audio Language Subtitle Language Rating Level New Password TV Screen MENU Language Digital Output DRC DD EE : Move FF : Prev GG Off On 1 MENU/
SET UP 2 3 MENU/
SET UP Select DD RR CC. Select OO ff ff (Decrease the DRC range) or OO nn
(Reset the DRC range to original values). Return to normal playback. I With the DVD format, you can hear a programs soundtrack in the most accu-
rate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). I This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. D V D O P E R A T O N I 55 DVD OPERATION PLAYING A DVD OR VIDEO CD Basic Playback 1POWER Turn TV on. 2 Slide your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.) toward the front of the screen. Playback starts. D V D O P E R A T O N I Stop Playback/Ejection 1 Stop playback. At this time, DVD/VCD player stops playback temporarily and maintains the current playback position.(At this time, if you press pp ll aa yy button, Playback will resume from the location where you stopped playback.) Fast Forward/Backward 1 2 Press this button during playback. Select the required speed:
X2, X4, X8, X16 or X32 (backward/
forward). Return to normal playback. Slow Motion 1SLOW -
SLOW +
Press this button during playback. Select the required speed:
FF I 1/2, FF I 1/4, FF I 1/8, FF I 1/16
(backward), or I GG 1/2, I GG1/4, I GG 1/8, I GG 1/16 (forward). 2 3 EJECT Press this button again to stop playback fully. (At this time, if you press ppllaayy button, disc playback start from the beginning.) 2 Return to normal playback. Remove the disc. The Disc will come out halfway. I There is no sound during fast or slow playback for DVDs or Video CDs. I Slow motion playback in reverse is not possi-
ble with Video CDs. I If you have a disc problem during playback, remove the disc by pressing and holding down the button on the side panel for 5 seconds. The Disc will come out completely. After that, turn the TV off and then on again. Pause Playback (Still Mode) 1 Press this button during playback. 2 or Use this button again to return to normal playback. 56 Skip a Chapter/Track 1SKIP -
SKIP +
Press it briefly during playback to select the next chapter/track or to return to the beginning of the cur-
rent chapter/track. SKIP -
Press it twice briefly to step back to the previous chapter/track. Still Picture and Frame-by-Frame Playback 1 Press this button during playback. 2SKIP -
SKIP +
Press this button during playback. Press it repeatedly to advance the picture frame-by-frame. 3 Exit still motion mode. Repeat Playback You can play a specific title, chapter, track, or segment repeatedly. 1 REPEAT 4 Use this button during playback. Press it repeatedly to change the repeat mode. DVD:
Repeat Off. VCD:
ALL, Repeat Off. Chapter, Track, Title, ALL, I On a Video CD with PBC, you must set PP BB CC -
OO ff ff using PP BB CC button to use the repeat function. Disc Menu (DVD only) 1 2 DISC MENU Press this button during playback. ENTER Select the desired menu option. 3 RETURN FLASHBK Return to normal playback. Title Menu (DVD only) 1 TITLE MENU 6 2 Press this button during playback. ENTER Select the desired item. I The TV may not be able to select the disc or title menu depending on a sort of DVD disc. OSD (On-Screen Display) You can display the playback status on TV screen as following; Title, Chapter number, Playing time. 1 DISPLAY 1 2 DISPLAY 1 Press this button during playback. Title, Chapter information appears on screen. Press it repeatedly to change OSD. DDVVDD:: Title Elapsed Title Remain Chapter Elapsed Chapter Remain Display off. AAuuddiioo CCDD:: Single Elapsed Single Remain Total Elapsed Total Remain. Title Elapsed TT 01/03 CH 01/09 0:28:22 Title Number Playing Time Chapter Number I OSD display may different depending on a sort of DVD disc. D V D O P E R A T O N I 57 DVD OPERATION A-B Repeat Playback Subtitles A-B repeat playback allows you to repeat material between two selected points. 1 SUBTITLE 7 Press it during playback to see the differ-
ent subtitle languages. 1 A-B 5 2 A-B 5 3 A-B 5 Select the start point during back. A is displayed on TV screen and the starting point of your selected seg-
ment is set up. AB is displayed on TV screen and Select the end point. the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. Resume normal playback. Camera Angle (DVD only) If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are currently watching. Zoom When enlarging the picture, it may become distorted. 1 ZOOM 2 2 ZOOM 2 3 Press this button during playback. Press it repeatedly to change the TV screen in the sequence: 2x, 3x, 4x. Adjust the main picture position while in the enlarged picture mode. I Zoom may not work on some DVDs. 1 ANGLE 3 2 ANGLE 3 Press this button during playback. PBC Set Playback Control (PBC) to On or Off. Press it repeatedly to select the desired angle. 1 PBC Select OO nn or OO ff ff. I On: Video CDs with PBC are played according to the PBC. I Off: Video CDs with PBC are played the same way as Audio CDs. I You can only change the angle for DVDs that provide multiple angles of scenes. I The angle function will not work on DVD video discs that do not contain scenes recorded at different angles. I The number of angles varies from disc to disc. D V D O P E R A T O N I 58 MP3 OPERATION MP3 Files Playback Options Move to another Track When inserted, the MP3 menu screen appears automatically depending on the MP3 discs folder
(directory) structure. 1SKIP -
SKIP +
Press it briefly during playback to go to the next track or to return to the beginning of the current track. 02 : 30 03 : 37 001 / 011 GG SKIP -
Press it twice briefly to go back to the previous track.
.. PICTURE 2 PICTURE 1 O.S.T. - 3 PICTURE 3 O.S.T. - 4 DD EE Resolution 500 x 375 ENTER Select desired folder. Select desired file and play the MP3 file. Repeat Playback You can play a specific track repeatedly. 1 REPEAT 4 Use this button during playback. Press it repeatedly to change the repeat mode: Shuffle, Random, Repeat One, Repeat All, Repeat Off. D V D O P E R A T O N I 1 2 3 Stop Playback 1 Stop playback. Pause Playback 1 Pause playback. 2 or ENTER Use this button again to return to normal playback. Fast Forward/Backward 1 Press this button during playback. Select the required speed:
2X, 4X, 8X, 16X or 32X. 2 Return to normal playback. A-B Repeat Playback A-B repeat playback allows you to repeat material between two selected points. 1 A-B 5 2 A-B 5 3 A-B 5 Select the start point during playback. A is displayed on TV screen and the starting point of your selected seg-
ment is set up. AB is displayed on TV screen and Select the end point. the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. Resume normal playback. 59 DVD OPERATION AUDIO CD OPERATION On-Screen Display Repeat Playback You can display the Track, and Playback time status on the TV screen. You can play a specific track repeatedly. 1 DISPLAY 1 Press this button during playback. Press it repeatedly to change track infor-
mation: Single Elapsed, Single Remain, Total Elapsed, or Total Remain. 1 REPEAT 4 Use this button during playback. Press it repeatedly to change the repeat mode: Track, All, Repeat Off. Single Elapse Track 01/21 01:00 Track Number Playing Time Stop Playback 1 2 Stop playback. At this time the CD player stops playback temporarily and maintains the current playback position. Press it repeatedly to stop playback fully.
(At this time if you press the GG button, disc playback starts from the beginning.) Pause Playback (Still Mode) 1 Pause playback. 2 or Return to normal playback. Fast Forward/Backward 1 Press this button during playback. Select the required speed:
2X, 4X, 8X, 16X or 32X. 2 Return to normal playback. D V D O P E R A T O N I 60 Move to another Track 1SKIP -
SKIP +
Use this button during playback. Press it repeatedly to skips to the next/previous track. A-B Repeat Playback A-B repeat playback allows you to repeat material between two selected points. 1 A-B 5 2 A-B 5 3 A-B 5 Select the start point during playback. A is displayed on TV screen and the starting point of your selected seg-
ment is set up. AB is displayed on TV screen and Select the end point. the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. Resume normal playback. JPG FILE VIEWING OPTIONS As a JPG file is loaded, the table of contents appears on the TV screen. Picture Selection 1 2 3 Select the desired picture. The selected JPG file appears as shown. 02 : 30 03 : 37 001 / 011 GG
.. PICTURE 2 PICTURE 1 O.S.T. - 3 PICTURE 3 O.S.T. - 4 DD EE Resolution 500 x 375 Start Slide show mode. Return to play list. I If you press the EENNTTEERR button while playing an MP3 disc, the slide show starts. Rotation 1
E T A T O R R O T A T E
Rotate a JPG file clockwise or counter clockwise during showing a picture. Repeat Playback You can show JPG files repeatedly. 1 REPEAT 4 Use this button during playback. Press it repeatedly to change the repeat mode: Shuffle, Random, Repeat One, Repeat All, Repeat Off. D V D O P E R A T O N I I If you play play MP3 and JPG slide show simul-
taneously, repeat function is applied to both MP3 and JPG files. 61 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.
NOTE GG If a fixed image is displayed on the screen for very long time, the image could become imprinted on the screen and remain visible. This phenomenon is common to all manufacturers and is not covered by war-
ranty. Normally it will dissipate after a few minutes. PICTURE Move Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Set By Program 4:3 16:9 Zoom1 Zoom2 Just Scan I You can also adjust AAssppeecctt RRaattiioo in the QQ--MMeennuu. 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select PPIICCTTUURREE. Select AAssppeecctt RRaattiioo. Select the desired picture format. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 62 Set by program Selects the proper picture proportion to match the sources image.
(4:3 4:3) Zoom 1 Choose Zoom 1 when you want to view the pic-
ture without any alteration. However, the top and bottom portions of the picture will be cropped.
(16:9 16:9) Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear pro-
portion to fill the entire screen. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. JJuusstt SSccaann operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV
(720p/1080i/1080p) input source. P I C T U R E C O N T R O L 63 PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. PICTURE Move Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R Vivid Standard Cinema Sport Game Expert1 Expert2 G 1 MENU/
SET UP Select PPIICCTTUURREE. 2 3 ENTER Select PPiiccttuurree MMooddee. ENTER Select VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee. 4RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. I VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, and GGaammee Settings are preset for the opti-
mum picture quality at the factory and are not adjustable. I You can also adjust PPiiccttuurree MMooddee in the QQ.. MMeennuu. P I C T U R E C O N T R O L 64 Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. PICTURE Move Enter PICTURE Move Enter E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G E Contrast Brightness Sharpness Color Tint Advanced Control Reset 50 50 Color Temperature 50 Fresh Contrast 50 Fresh Color 0 Noise Reduction Gamma G R Screen (RGB-PC) Screen (RGB-PC) Black Level Eye Care Real Cinema 1 MENU/
SET UP 2 ENTER Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. ENTER Select CCoolloorr TTeemmppeerraattuurree. 3 4 Select CC oo oo ll, MMeeddiiuumm, or WW aa rr mm. 5RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. FF Medium GG Off Off Off Medium Low Off Off P I C T U R E C O N T R O L Close 65 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. Backlight EE 80 EE EE EE Enter PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R G Select PPIICCTTUURREE. Select PPiiccttuurree MMooddee. Select VViivviidd, SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt, or GGaammee. Select BBaacckklliigghhtt, CCoonnttrraasstt, BBrriigghhttnneessss, SShhaarrppnneessss, CCoolloorr, or TT ii nn tt. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 1 MENU/
SET UP 2 3 4 5 ENTER ENTER ENTER ENTER 6RETURN MENU/
SET UP P I C T U R E C O N T R O L 66 Picture Mode - Expert Control By segmenting categories, EExxppeerrtt11 and EExxppeerrtt22 provide more categories which users can set as they see fit, offering the optimal picture quality for users. PICTURE Move Enter E Fresh Contrast Noise Reduction 50 50 60 60 0 Contrast Brightness Sharpness Color Tint Expert Control Reset Gamma Black Level Real Cinema R Color Standard White Balance Method Red Contrast Green Contrast Blue Contrast FF Off GG Off Medium G Off Off SD Normal 2 Points 50 50 50 E Screen (RGB-PC) PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint E 80 90 50 60 60 0 R Vivid Standard Cinema Sport Game Expert1 Expert2 G 1 MENU/
SET UP ENTER ENTER ENTER ENTER 2 3 4 5 6 7RETURN MENU/
SET UP Select PPIICCTTUURREE. Select PPiiccttuurree MMooddee. Select EExxppeerrtt11 or EExxppeerrtt22. Select EExxppeerrtt CCoonnttrrooll. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 67 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images. PICTURE Move Enter PICTURE Move Enter E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset Color Temperature Medium Fresh Contrast FF Off GG Fresh Color Noise Reduction R Gamma G Black Level Eye Care Real Cinema Off Off Medium Low Off Off Close 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select FFrreesshh CCoonnttrraasstt, FFrreesshh CCoolloorr, NNooiissee RReedduuccttiioonn, or GGaammmmaa. Select your desired options. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 68 ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode. PICTURE Move Enter PICTURE Move Enter E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset Color Temperature Medium Fresh Contrast Fresh Color Noise Reduction R Gamma G Off Off Off Medium Black Level FF Low GG Eye Care Real Cinema Off Off Close Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. I HH ii gg hh: The reflection of the screen gets I LL oo ww: The reflection of the screen gets darker. brighter. I AAuuttoo: Realizing the black level of the screen and set it to High or Low auto-
matically. Select BBllaacckk LLeevveell. Select LL oo ww or HH ii gg hh. Return to the previous menu. Return to TV viewing. 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP P I C T U R E C O N T R O L 69 PICTURE CONTROL ADVANCED CONTROL - EYE CARE Dims extremely bright pictures. This feature is disabled in PPiiccttuurree MMooddee--VViivviidd, CCiinneemmaa. PICTURE Move Enter PICTURE Move Enter E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset Color Temperature Medium Fresh Contrast Fresh Color Noise Reduction R Gamma G Black Level Eye Care Real Cinema Off Off Off Medium Low FF Off GG Off Close 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP Select PPIICCTTUURREE. Select AAddvvaanncceedd CCoonnttrrooll. Select EEyyee CCaarree. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 70 ADVANCED CONTROL - REAL CINEMA Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. PICTURE Move Enter PICTURE Move Enter Color Temperature Medium Fresh Contrast Fresh Color Noise Reduction G Gamma Black Level Eye Care Off Off Off Medium Low Off Real Cinema FF Off GG Close E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R Screen (RGB-PC) Screen (RGB-PC) 1 MENU/
SET UP Select PPIICCTTUURREE. ENTER Select AAddvvaanncceedd CCoonnttrrooll. ENTER Select RReeaall CCiinneemmaa.. 2 3 4 Select OO nn or OO ff ff. 5RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 71 PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move Enter E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset ii R G Resetting video configuration... E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Reset R G Screen (RGB-PC) Screen (RGB-PC) 1 MENU/
SET UP 2 3 ENTER ENTER 4 MENU/
SET UP Select PPIICCTTUURREE. Select RReesseett. Initialize the adjusted value. Return to TV viewing. P I C T U R E C O N T R O L 72 POWER INDICATOR OPTION Language Input Label Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: Off
: Off
: 1
: Home OPTION Language Input Label Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: Off
: Off
: 1
: Home Standby Light FF On GG Power Light On Close 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP Select OOPPTTIIOONN. Select PPoowweerr IInnddiiccaattoorr. Select SSttaannddbbyy LLiigghhtt or PPoowweerr LLiigghhtt. Select your desired options. Return to the previous menu. Return to TV viewing. I SSttaannddbbyy LLiigghhtt: You can set the brightness of the LED on the front side of the TV during power standby. I PPoowweerr LLiigghhtt: You can set the the LED on the front side of the TV to be turned on or off while watching the TV. P I C T U R E C O N T R O L 73 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter Off On L 0 R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU/
SET UP Select AAUUDDIIOO. 2 3 ENTER Select AAuuttoo VVoolluummee. ENTER Select OO nn or OO ff ff. 4RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 74 CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset 50 50 E AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter Off On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 1 MENU/
SET UP Select AAUUDDIIOO. 2 3 ENTER Select CClleeaarr VVooiiccee. ENTER Select OO nn or OO ff ff. 4RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. I If you select CClleeaarr VVooiiccee--OOnn, SS RR SS TT rr uu SS uu rr rr oo uu nn dd XX TT feature will not work. I You can also adjust CClleeaarr VVooiiccee in the QQ--MMeennuu. S O U N D
L A N G U A G E C O N T R O L 75 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, and GG aa mm ee are preset for optimum sound quality at the factory and are not adjustable. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L R
: Standard Standard SRS TruSurround XT: Off Music Treble Cinema Bass Sport Reset Game E 50 50 1 MENU/
SET UP Select AAUUDDIIOO. 2 3 ENTER Select SSoouunndd MMooddee. ENTER Select SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, or GGaammee. 4RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. I You can also adjust SSoouunndd MMooddee in the QQ.. MMeennuu. S O U N D
L A N G U A G E C O N T R O L 76 SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Select AAUUDDIIOO. Select SSoouunndd MMooddee. Select SSttaannddaarrdd, MMuussiicc, CCiinneemmaa, SSppoorrtt, or GGaammee. Select TTrreebbllee or BB aass ss. 1 MENU/
SET UP 2 ENTER 3 ENTER 4 ENTER SRS TRUSURROUND XT 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select AAUUDDIIOO. Select SSRRSS TTrruuSSuurrrroouunndd XXTT. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 Bass Treble SRS TruSurround XT Off EE EE 50 50 Close 5 ENTER 6RETURN MENU/
SET UP Make appropriate adjustments. Return to the previous menu. Return to TV viewing. I SSRRSS TTrruuSSuurrrroouunndd XXTT: Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. S O U N D
L A N G U A G E C O N T R O L 77 SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Enter
: Off
: On Balance 0 L 0 EE R L R EE Close
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 AUDIO Auto Volume Clear Voice Balance Sound Mode Move Enter
: Off
: On 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset 50 50 E AUDIO Auto Volume Clear Voice Balance Sound Mode 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select AAUUDDIIOO. Select BBaallaannccee. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 78 E
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 Off On TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Clear Voice Balance Sound Mode TV Speaker E
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 AUDIO Clear Voice Balance Sound Mode TV Speaker 1 MENU/
SET UP Select AAUUDDIIOO. 2 3 ENTER Select TTVV SSppeeaakkeerr. ENTER Select OO nn or OO ff ff. 4RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 79
: Off
: On Move Enter 0 L R Resetting audio configuration... ii
: Standard SRS TruSurround XT: Off Treble Bass Reset E 50 50 SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Auto Volume Clear Voice Balance Sound Mode
: Off
: On Move Enter 0 L R
: Standard SRS TruSurround XT: Off Treble Bass Reset 50 50 E AUDIO Auto Volume Clear Voice Balance Sound Mode 1 MENU/
SET UP 2 3 ENTER ENTER 4 MENU/
SET UP Select AAUUDDIIOO. Select RReesseett. Initialize the adjusted value. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 80 STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-
panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio Backlight Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer Del/Add/Fav CH 16:9 3 Off Vivid Standard Off FF English GG Off Add Close Analog TV Digital TV 1Q. MENU 2 3 Q. MENU Select SS AA PP. Select MMoonnoo, SStteerreeoo, or SS AA PP. Return to TV viewing. 1Q. MENU 2 3 Q. MENU Select MMuullttii AAuuddiioo. Select other languages. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 81 SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English Menu English Audio FF English GG Close
: On
: Off
: Off
: 1
: Home S O U N D
L A N G U A G E C O N T R O L 82 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP Select OOPPTTIIOONN. Select LLaanngguuaaggee. Select AAuuddiioo. Select your desired language:
EEnngglliisshh, SSppaanniisshh, or FFrreenncchh Return to the previous menu. Return to TV viewing. ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Move Enter Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting
: English Menu FF English GG Audio English Close
: On
: Off
: Off
: 1
: Home 1 MENU/
SET UP Select OOPPTTIIOONN. 2 3 4 ENTER Select LLaanngguuaaggee. ENTER Select MMeennuu. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. 5RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 83 SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-
tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when CCaappttiioonn Mode is set OO nn. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: On
: 1
: Home FF Mode On GG CC1 Digital Option Close Select OOPPTTIIOONN. I When selecting OO ff ff, Sub-menus for Analog, DTV, and Digital Option become disabled. Select CCaappttiioonn. I CCAAPPTTIIOONN The term for the words that scroll across the bottom of the TV screen;
usually the audio portion of the pro-
gram provided for the hearing impaired. I TT EE XX TT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provid-
ed by the broadcaster. Select OO nn. Select CC CC 11-44 or TTeexxtt11-44. Return to the previous menu. Return to TV viewing. 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP S O U N D
L A N G U A G E C O N T R O L 84 Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: On
: 1
: Home FF Mode On GG CC1 Digital Option Close OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home Select OOPPTTIIOONN. Select CCaappttiioonn. Select OO nn. Select CC CC 11-44, TTeexxtt11-44, or SSeerrvviiccee11 - 66. Return to the previous menu. Return to TV viewing. 1 MENU/
SET UP ENTER ENTER 2 3 4 5RETURN MENU/
SET UP S O U N D
L A N G U A G E C O N T R O L 85 SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: On FF
: 1 Mode On GG Service1
: Home Digital Option Close FF Size Font Text Color Text Opacity Bg Color Bg Opacity Edge Type Edge Color Custom GG A Standard Font 1 White Solid Black Solid None Black Close 1 MENU/
SET UP Select OOPPTTIIOONN. 2 3 4 5 6 ENTER ENTER Select CCaappttiioonn Select OO nn. Select DDiiggiittaall OOppttiioonn. ENTER Select CCuussttoomm. Customize the SSttyyllee, FFoonntt, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. 7RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. I SS ii zz ee: Set the word size. I FFoonntt: Select a typeface for the text. I TTeexxtt CCoolloorr: Choose a color for the text. I TTeexxtt OOppaacciittyy: Specify the opacity for the text color. I BBgg ((BBaacckkggrroouunndd)) CCoolloorr: Select a background color. I BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy: Select the opacity for the background color. I EEddggee TTyyppee: Select an edge type. I EEddggee CCoolloorr: Select a color for the edges. S O U N D
L A N G U A G E C O N T R O L 86 TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME Move Enter
: Feb/21/2008/ 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off TIME Move Enter FF Auto
: Feb/21/2008/ 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off Month Date Year Hour Minute GG 2008 2 21 2 AM 10 Time Zone Eastern Daylight Saving Auto Close 1 MENU/
SET UP Select TT II MM EE. ENTER ENTER 2 3 4 5 6RETURN MENU/
SET UP Select CClloocckk. Select AAuuttoo. Select your viewing area time zone. U.S.A: EE aa ss tt ee rr nn, CC ee nn tt rr aa ll, MM oo uu nn tt aa ii nn, PPaacciiffiicc, AAllaasskkaa, or HHaawwaaiiii. Canada: EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaacciiffiicc, NNeeww FF..llaanndd, or AAttllaannttiicc. Select AAuuttoo, OO nn, or OO ff ff (depending on whether or not your viewing area observes Daylight Saving time). Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 87 TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. TIME Move Enter TIME Move Enter FF
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off Month Date Year Hour Minute Manual GG 2008 2 21 2 AM 10 Time Zone Eastern Daylight Saving Auto Close
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off 1 MENU/
SET UP Select TT II MM EE. ENTER ENTER 2 3 4 5 6RETURN MENU/
SET UP Select CClloocckk. Select MMaannuuaall. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 88 AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The OOffff TTiimmee function overrides the OOnn TTiimmee function if they are both set to the same time. The TV must be in standby mode for the OOnn TTiimmee to work. If you do not press any button within 2 hours after the TV turns on with the OOnn TTiimmee function, the TV will automatically revert to standby mode. TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off TIME Move Enter Clock Off Time On Time Sleep Timer : Off Auto Sleep : Off
: Feb/21/2008 2:10 AM
: Off Repeat
: 6:30 AM (Once) Hour Minute Input Channel Volume FF Once 6 AM GG 30 TV TV 2-0 30 Close 1 MENU/
SET UP Select TT II MM EE. I To cancel OOnn//OOffff TTiimmee function, select OO ff ff. I Only for On Time function ENTER ENTER 2 3 4 5 6RETURN MENU/
SET UP Select OOffff ttiimmee or OOnn ttiimmee. Select RReeppeeaatt. Select OO ff ff, OO nn cc ee, EEvveerryyddaayy, MM oo nn~FF rr ii, MM oo nn~SS aa tt, WWeeeekkeenndd, or SSuunnddaayy. Select and set HHoouurr or MMiinnuuttee. Return to the previous menu. Return to TV viewing. 1 2 3 4 ENTER Select IInnppuutt. Select TT VV, AAVV11, AAVV22, CCoommppoonneenntt, BBuuiilltt--IInn DDVVDD, RRGGBB--PPCC, HHDDMMII11, HHDDMMII22, or HHDDMMII33. When Selecting TT VV:
set the channel at turn-on. Adjust to sound level at turn-on. I T M E S E T T I N G 89 TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time
: Off On Time Sleep Timer : Off Auto Sleep : Off TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time
: Off On Time Sleep Timer : Off Auto Sleep : Off FF GG Off Close 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select TT II MM EE. Select SSlleeeepp TTiimmeerr. Select OO ff ff, 11 00, 22 00, 33 00, 66 00, 99 00, 11 22 00, 11 88 00, or 22 44 00 minutes. Return to the previous menu. Return to TV viewing. I You can also adjust SSlleeeepp TTiimmeerr in the QQ..MMeennuu. I T M E S E T T I N G 90 AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : Off TIME Move Enter
: Feb/21/2008 2:10 AM Clock
: Off Off Time On Time
: Off Sleep Timer : Off Auto Sleep : On Off On TV will be automatically turned off, in case of No Signal for 10 minutes. 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select TT II MM EE. Select AAuuttoo SSlleeeepp. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 91 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-
casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-
video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies:
I TV-G (General audience) I TV-PG (Parental guidance suggested) I TV-14 (Parents strongly cautioned) I TV-MA (Mature audience only) I TV-Y I TV-Y7 (Children 7 years older)
(All children) SET PASSWORD & LOCK SYSTEM Setting up Your Password Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. For USA For Canada LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select LL OO CC KK. Input the password. 1 MENU/
SET UP 2 1 4 7 3 6 9 2 5 8 0 Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Enter Password
Close I Enter the password as requested. I The TV is set up with the initial password 0-0-0-0. P A R E N T A L C O N T R O L
R A T I N G 92 Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Off On Lock System : On Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU/
SET UP 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU/
SET UP ENTER Select LL OO CC KK. Input the password. Select LLoocckk SSyysstteemm. Select OO nn or OO ff ff. I When you select OO nn, the Lock System is enable. Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 93 PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block New
Confirm *
Close 1 MENU/
SET UP ENTER Select LL OO CC KK. 2 1 4 7 3 4 3 6 9 2 5 8 0 Input the password. Select SSeett ppaasssswwoorrdd. ENTER 3 6 9 1 4 7 2 5 8 0 Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the CCoonnffiirrmm. 5RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 94 CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Block/Unblock Move CH Move Page MENU Previous RETURN Exit LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU/
SET UP ENTER Select LL OO CC KK. 2 1 4 7 3 4 5 3 6 9 2 5 8 0 ENTER Input the password. Select BBlloocckk CChhaannnneell. Select a channel to block or unblock it. ENTER Block or unblock a channel. 6 MENU/
SET UP RETURN Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 95 PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - Only for USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Blocking off : Permits all programs G PG PG-13 R NC-17 X Blocking Off 1 MENU/
SET UP ENTER Select LL OO CC KK. 2 1 4 7 3 4 3 6 9 2 5 8 0 Input the password. Select MMoovviiee RRaattiinngg. ENTER Select GG, PP GG, PPGG--1133, RR, NNCC--1177 or XX. 5RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. I G (General audience) I PG (Parental guidance suggested) I PG-13 (Parents strongly cautioned) I R (Restricted) I NC-17 (No one 17 and under admitted) I X (Adult only) I Blocking Off (Permits all programs) GG If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. P A R E N T A L C O N T R O L
R A T I N G 96 TV Rating Children - Only for USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-
ences in the TV Rating - sub menu, your children can view those programs. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Fantasy Violence Close Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--CChhiillddrreenn. Select AA gg ee or FFaannttaassyy VViioolleennccee. I Age (applies to TV-Y, TV-Y7) I Fantasy Violence (applies to TV-Y7) Select block options. Return to the previous menu. Return to TV viewing. 1 MENU/
SET UP 2 1 4 7 3 4 5 3 6 9 2 5 8 0 ENTER ENTER 6RETURN MENU/
SET UP P A R E N T A L C O N T R O L
R A T I N G 97 PARENTAL CONTROL / RATINGS TV Rating General - Only for USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Dialogue Language Sex Violence Close 1 MENU/
SET UP 2 1 4 7 3 4 3 6 9 2 5 8 0 ENTER 5 ENTER 6RETURN MENU/
SET UP ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--GGeenneerraall. Select AA gg ee, DDiiaalloogguuee, LLaanngguuaaggee, SS ee xx or VViioolleennccee. Select block options. Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 98 I Age (applies to TV-G,TV-PG,TV-14,TV-
MA). I Dialogue-sexual dialogue (applies to TV-PG,TV-14). I Language-adult language (applies to TV-PG, TV-14, TV-MA). I Sex-sexual situations (applies to TV-PG, TV-14, TV-MA). I Violence (applies to TV-PG, TV-14, TV-
MA). TV Rating English - Only for CANADA Selecting canadian english language rating system. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Blocking off : Permits all programs E C C8+
G PG 14+
18+
Blocking Off 1 MENU/
SET UP 3 6 9 2 5 8 0 2 1 4 7 3 4 ENTER 5RETURN MENU/
SET UP ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--EEnngglliisshh. Select EE, CC, CC 88 ++, GG, PP GG, 11 44 ++, 11 88 ++, or BBlloocckkiinngg OOffff. Return to the previous menu. Return to TV viewing. I E (Exempt) I C (Children) I C8+ (Children eight years and older) I G (General programming, suitable for all audiences) I PG (Parental Guidance) I 14+ (Viewers 14 years and older) I 18+ (Adult programming) I Blocking Off (Permits all programs) P A R E N T A L C O N T R O L
R A T I N G 99 PARENTAL CONTROL / RATINGS TV Rating French - Only for CANADA Selecting canadian french language rating system. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E G 8ans+
13ans+
16ans+
18ans+
Blocking Off 1 MENU/
SET UP 2 1 4 7 3 4 3 6 9 2 5 8 0 ENTER 5RETURN MENU/
SET UP ENTER Select LL OO CC KK. Input the password. Select TTVV RRaattiinngg--FFrreenncchh. Select EE, GG, 88aannss++, 1133aannss++, 1166aannss++, 1188aannss++, or BBlloocckkiinngg ooffff. Return to the previous menu. Return to TV viewing. I E (Exempt) I G (General) I 8ans+ (General-Not convenient for lit-
tle children) I 13ans+ (Not convenient for children of 13 years and younger) I 16ans+ (Not convenient for children of 16 years and younger) I 18ans+ (This programs is only for adults) I Blocking off (Permits all programs) P A R E N T A L C O N T R O L
R A T I N G 100 DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channel signals. This function operates only when TV has received Region5 Rating data. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block E Humor Sports Cruelty Language Sadness Genre Age E Close I Based on rating table, your TV's OSD
(On Screen Display) may differ slightly from what is shown in this manual. 1 MENU/
SET UP 2 1 4 7 3 6 9 2 5 8 0 3 4 5 ENTER ENTER 6RETURN MENU/
SET UP ENTER Select LL OO CC KK. Input the password. Select DDoowwnnllooaaddaabbllee RRaattiinngg. Select desired DDoowwnnllooaaddaabbllee RRaattiinngg option. Select desired option and block it. Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 101 PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block AV1 AV2 Component Built-In DVD RGB-PC HDMI1 HDMI2 HDMI3 FF Off Off GG Off Off Off Off Off Off Close 1 MENU/
SET UP ENTER Select LL OO CC KK. P A R E N T A L C O N T R O L
R A T I N G 2 1 4 7 3 4 5 3 6 9 2 5 8 0 Input the password. Select IInnppuutt BBlloocckk. ENTER Select input source. Select OO nn or OO ff ff. 6RETURN MENU/
SET UP Return to the previous menu. Return to TV viewing. 102 KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English Off On
: On
: Off
: Off
: 1
: Home 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Select OOPPTTIIOONN. Select KKeeyy LLoocckk. Select OO nn or OO ff ff. Return to the previous menu. Return to TV viewing. I In KKeeyy LLoocckk OO nn, if the TV is turned off, press the rr / I, INPUT, CH button on the TV or POWER, INPUT, or NUMBER buttons on the CH remote control. I With the KKeeyy LLoocckk OOnn, the display
KKeeyy LLoocckk appears on the screen if any button on the front panel is pressed while viewing the TV. P A R E N T A L C O N T R O L
R A T I N G 103 APPENDIX TROUBLESHOOTING TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy.. The remote control doesnt work I Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Power is suddenly turned off I Is the sleep timer set?
I Check the power control settings. Power interrupted. TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. No picture &No sound I Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet?
I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly I This is normal, the image is muted during the product startup process. Please after switching on contact your service center, if the picture has not appeared after a few minutes. I Adjust Color in menu option. I Try unplugging any others electronics that are near by to see if interference is No or poor color or poor picture causing the problem. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly?
I Activate any function to restore the brightness of the picture. Horizontal/vertical bars or picture shaking I Check for local interference such as an electrical appliance or power tool. Poor reception on some channels I Station or cable product experiencing problems, tune to another station. I Station signal is weak, reorient antenna. I Check for sources of possible interference. Lines or streaks in pictures No picture when connecting HDMI I Check antenna (Change the direction of the antenna). I Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. A P P E N D I X 104 TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. Picture OK but No sound I Press the VOL or VOLUME button. I Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?
No output from one of the speakers I Adjust Balance in menu option. Unusual sound from inside the product I A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. No sound when connecting HDMI I Check HDMI cable over version 1.3. I Check USB cable over version 2.0. or USB
*This feature is not available for all models. TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd)) The signal is out of range I Adjust resolution, horizontal frequency, or vertical frequency. I Check the input source. Vertical bar or stripe on background &
Horizontal Noise &
Incorrect position I Run the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color I Check the signal cable. I Update video card drivers. A P P E N D I X 105 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. I Please be sure not to use a wet cloth. Extended Absence CAUTION GG If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 106 PRODUCT SPECIFICATIONS MODELS Dimensions
(Width x Height x Depth) With stand Without stand Weight With stand Without stand Power requirement Television System Program Coverage External Antenna Impedance Built-In DVD Video Format Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity 26LG40
(26LG40-UA)
(26LG40-UG) 32LG40
(32LG40-UA)
(32LG40-UG) 26.2 x 20.6 x 10.5 inches 666.8 x 524.5 x 267.0 mm 31.8 x 24.8 x 11.7 inches 808.8 x 630.3 x 299.2 mm 26.2 x 18.0 x 4.0 inches 666.8 x 457.8 x 103.0 mm 31.8 x 21.7 x 4.2 inches 808.8 x 551.6 x 108.0 mm 24.4 pounds / 11.1 kg 21.1 pounds / 9.6 kg 34.1 pounds / 15.5 kg 29.7 pounds / 13.5 kg AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 480i 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
I The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 107 APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 2 3 4 5 6 Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a STB and press the corresponding mode button (such as a SS TT BB) on the remote con-
trol, while pointing at the component. Test the PPOOWWEERR and CC HH buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device. Turn on the component to be programmed, then press the corresponding mode button (such as SS TT BB) on the remote control. The remote control button of the desired device is illuminated. Press the MMEENNUU and MMUUTTEE buttons simultaneously, and the remote control is ready to be programmed with the code. Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off. Press the MMEENNUU button to store the code. Test the remote control functions to see if the component responds correctly. If not, repeat from step 2. A P P E N D I X 108 Codes Brand Codes Brand Codes Remote Control Code VCR Brand AIWA AKAI 034 016 043 046 124 125 146 072 031 033 103 AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 132 136 012 045 004 018 026 034 043 063 137 150 DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI INSTANTREPLAY 031 033 031 033 JCL 012 013 015 033 JCPENNY 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 JENSEN JVC KENWOOD LG (GOLDSTAR) 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 SEARS SCOTT SAMSUNG SANSUI SANYO SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 YAMAHA ZENITH A P P E N D I X 109 APPENDIX HDSTB Brand Codes Brand Codes Brand Codes HOUSTON TRACKER 033 037 039 051 HUGHES JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 057 104 068 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC 121 PANSAT PERSONAL CABLE 117 071 PHILIPS 105 PICO 019 102 PRESIDENT PRIMESTAR 030 110 111 PROSAT RCA REALISTIC SAMSUNG SATELLITE SERVICE CO 028 035 047 057 072 066 106 043 074 123 085 SCIENTIFIC ATLANTA 032 138 SONY STARCAST SUPER GUIDE TEECOM 103 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 TOSHIBA UNIDEN VIEWSTAR WINEGARD ZENITH ALPHASTAR DSR 123 050 AMPLICA BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 008 009 012 077 054 CHAPARRAL CITOH CURTIS MATHES 050 145 DRAKE DX ANTENNA ECHOSTAR 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 ELECTRO HOME 089 EUROPLUS 114 017 021 022 027 FUJITSU 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI 031 059 101 139 140 A P P E N D I X 110 IR CODES 1. How to Connect I Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes I Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 I Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame I Lead code I Repeat code Repeat code Tf 9 ms 4.5 ms 9 ms 2.25 ms I BBiitt ddeessccrriippttiioonn Bit 0 0.55 ms Bit 1 0.56 ms 1.12 ms 0.56 ms 2.24 ms I FFrraammee iinntteerrvvaall:: TTff The waveform is transmitted as long as a key is depressed. Tf Tf A P P E N D I X Tf=108ms @455KHz 111 APPENDIX Code
(Hexa) Function Note Code
(Hexa) Function Note 08 45 43 0B POWER Q.MENU MENU INPUT Remote control Button (Power On/Off) D6 TV Discrete IR Code Remote control Button
(TV Input Selection) Remote control Button C4 POWER ON Discrete IR Code Remote control Button
(Only Power On) 10-19 Number Key 0-9 Remote control Button C5 POWER OFF Discrete IR Code 4C 1A 09 02 03 00 01 1E 40 41 07 06 44 5B 7E 30 B0 BA B1 BD 8F 8E CA 6B B3 B2 3C 3D
- (Dash) FLASHBK MUTE VOL +
VOL -
CH CH FAV ENTER RETURN SIMPLINK AV MODE PLAY PAUSE STOP REC REW FF EJECT Remote control Button Remote control Button 5A AV1 Remote control Button
(Only Power Off) Discrete IR Code
(AV1 Input Selection) Remote control Button D0 AV2 Discrete IR Code Remote control Button
(AV2 Input Selection) Remote control Button BF COMPONENT Discrete IR Code Remote control Button
(Component Input Selection) Remote control Button D4 Built-In DVD Discrete IR Code Remote control Button
(Built-In DVD Input Selection) Remote control Button D5 RGB-PC Discrete IR Code Remote control Button
(RGB-PC Input Selection) Remote control Button CE HDMI1 Discrete IR Code Remote control Button
(HDMI1 Input Selection) Remote control Button CC HDMI2 Discrete IR Code Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button E9 76 77 AF
(HDMI2 Input Selection) HDMI3 Discrete IR Code
(HDMI3 Input Selection) Ratio 4:3 Discrete IR Code
(Only 4:3 Mode) Ratio 16:9 Discrete IR Code
(Only 16:9 Mode) Ratio Zoom Discrete IR Code
(Only Zoom1 Mode) DISC MENU Remote control Button SKIP +
SKIP -
SLOW +
SLOW -
Remote control Button Remote control Button Remote control Button Remote control Button A P P E N D I X 112 EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. I Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup C RGB IN RGB(PC) AUDIO
(RGB/DVI) DIGITAL AUDIO OUT OPTICAL RS-232C IN
(CONTROL & SERVICE) AUDIO OUT REMOTE CONTROL IN AUDIO PONENT IN S-VIDEO
) AUDIO
VIDEO MONO 1 N I V A Type of Connector; D-Sub 9-Pin Male Communication Parameters PC I Baud rate : 9600 bps (UART) I Data length : 8 bits I Parity : None I Stop bit : 1 bit I Communication code : ASCII code I Use a crossed (reverse) cable.
NOTE GG This TV has command echo back. No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 A P P E N D I X 113 APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration
(Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations
(Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: HomeFF 1 GG Close Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping1. GG pp..111188. OPTION Language Input Label SIMPLINK Key Lock Caption Set ID Power Indicator Initial Setting Move Enter
: English
: On
: Off
: Off
: 1
: Home Select OOPPTTIIOONN. Select SSeett IIDD. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Return to TV viewing A P P E N D I X 114 1 MENU/
SET UP 2 3 ENTER ENTER 4RETURN MENU/
SET UP Command Reference List CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA
(Hexadecimal) CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA
(Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k k a b c d e f g h i j k l m 00 ~ 01
(GG p.117)
(GG p.117) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 00 ~ 01 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. Auto Configuration 20. Channel Add/Del 21. Key 22. Backlight k k k k j m m m r s t u u b c g 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 02
(GG p.118) 00 ~ 01
(GG p.119) 00 ~ 64 CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA00 DATA01 DATA02 DATA03 DATA04 DATA05
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 19. Channel Tuning m a physical major program high program low major low minor high minor low attribute A P P E N D I X 115 APPENDIX Transmission / Receiving Protocol TTrraannssmmiissssiioonn
[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission
/receiving protocol.
[DATA] : The data command. Responds with an acknowledgement after transmitting.
[Cr] : Carriage Return ASCII code 0x0D
[ ] : ASCII code space (0x20)
* In this model, TV will not send the status during standby mode. OOKK AAcckknnoowwlleeddggeemmeenntt
[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
* In this model, the TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Uses lower case, if set ID is 10, it will send the 0, a.
[DATA] : Uses lower case, if data is 0 x ab, it will send the a, b.
[OK] : Uses upper case. EErrrroorr AAcckknnoowwlleeddggeemmeenntt
[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Uses lower case, if set ID is 10, it will send the 0, a.
[DATA] : Uses lower case, if data is 0 x ab, it will send the a, b.
[NG] : Uses upper case. A P P E N D I X 116 0011.. PPoowweerr ((CCoommmmaanndd:: kk aa)) 0066.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd:: kk ff)) To control Power On/Off of the TV. To adjust volume. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* Note: The TV will send the acknowledgement after power on processing completion. There might be a time delay between command and acknowledgement. 0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd:: xx bb)) To select an input source for the TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 01: DTV (Cable) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV1 Data 21: AV2 Data 40: Component Data 41: Built-In DVD Data 60: RGB-PC Data 91: HDMI2 Data 90: HDMI1 Data 92: HDMI3 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
0033.. AAssppeecctt RRaattiioo ((CCoommmmaanndd:: kk cc)) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 05: Zoom 2 02: 16:9 04: Zoom 1 06: Set by program 09: Just scan Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Reserved 0044.. SSccrreeeenn MMuuttee ((CCoommmmaanndd:: kk dd)) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on) Data 01: Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
0055.. VVoolluummee MMuuttee ((CCoommmmaanndd:: kk ee)) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
0077.. CCoonnttrraasstt ((CCoommmmaanndd:: kk gg)) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
0088.. BBrriigghhttnneessss ((CCoommmmaanndd:: kk hh)) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
0099.. CCoolloorr ((CCoommmmaanndd:: kk ii)) To adjust screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
1100.. TTiinntt ((CCoommmmaanndd:: kk jj)) To adjust screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
1111.. SShhaarrppnneessss ((CCoommmmaanndd:: kk kk)) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 117 APPENDIX 1122.. OOSSDD SSeelleecctt ((CCoommmmaanndd:: kk ll)) 1188.. AAuuttoo CCoonnffiigguurraattiioonn ((CCoommmmaanndd:: jj uu)) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 1199.. CChhaannnneell TTuunniinngg ((CCoommmmaanndd:: mm aa)) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 Data 01 & 02: Major Channel Number Data 01: High byte Data 02: Low byte Two bytes are available for the Major and Minor, nor-
mally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
1133.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd:: kk mm)) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 1144.. TTrreebbllee ((CCoommmmaanndd:: kk rr)) To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping as shown. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
1155.. BBaassss ((CCoommmmaanndd:: kk ss)) To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping as shown. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
1166.. BBaallaannccee ((CCoommmmaanndd:: kk tt)) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping as shown. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
1177.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd:: kk uu)) To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 118 Data5:
7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved
... Reserved 2200.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb)) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
2211.. KKeeyy ((CCoommmmaanndd:: mm cc)) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 112. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
2222.. BBaacckklliigghhtt ((CCoommmmaanndd:: mm gg)) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. See page 118. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X The table above lists the binary code which must be converted to Hexadecimal before sending. For example:
The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.
* 7th bit : For which source do you want to change the channel.
* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.
* 5th bit: Use 0 with NTSC since it can only use the phys-
ical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35. Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital (ATSC) local channel 30-3. Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]
[Data02][Data03][Data04][x][a][ ][Set ID]
[ ][NG][Data00][x]
119 APPENDIX OPEN SOURCE LICENSE - This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other free software foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the soft-
ware, and (2) offer you this license which gives you legal permis-
sion to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make cer-
tain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license applies to any program or other work which con-
tains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a
"work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work con-
taining the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running the Program is not restricted, and the out-
put from the program is covered only if its contents constitute a work based on the program (independent of having been made by running the program). Whether that is true depends on what the program does. 1. You may copy and distribute verbatim copies of the program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and give any other recipients of the program a copy of this license along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. A P P E N D I X 120 b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license. c) If the modified program normally reads commands interac-
tively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this license.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the dis-
tribution of the whole must be on the terms of this license, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con-
test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the program. In addition, mere aggregation of another work not based on the program with the Program (or with a work based on the program) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. 3. You may copy and distribute the program (or a work based on it, under section 2) in object code or executable form under the terms of sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alter-
native is allowed only for noncommercial distribution and only if you received the program in object code or exe-
cutable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all mod-
ules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offer-
ing access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licens-
es terminated so long as such parties remain in full compli-
ance. 5. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the program
(or any work based on the program), you indicate your accep-
tance of this license to do so, and all its terms and conditions for copying, distributing or modifying the program or works based on it. 6. Each time you redistribute the program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforc-
ing compliance by third parties to this license. A P P E N D I X 121 APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this license, they do not excuse you from the con-
ditions of this license. If you cannot distribute so as to satis-
fy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the program at all. For example, if a patent license would not permit royalty-free redistribution of the program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution sys-
tem, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 8. If the distribution and/or use of the program is restricted in certain countries either by patents or by copyrighted inter-
faces, the original copyright holder who places the program under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present ver-
sion, but may differ in detail to address new problems or con-
cerns. Each version is given a distinguishing version number. If the program specifies a version number of this license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of A P P E N D I X 122 any later version published by the Free Software Foundation. If the program does not specify a version number of this license, you may choose any version ever published by the Free Software Foundation. 10.If you wish to incorporate parts of the program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copy-
righted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of pro-
moting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRO-
GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the great-
est possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effective-
ly convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and a brief idea of what it does. Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the license, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details. The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w and show c; they could even be mouse-clicks or menu items-whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the pro-
gram, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the pro-
gram Gnomovision (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subrou-
tine library, you may consider it more useful to permit linking pro-
prietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this license. A P P E N D I X 123 APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, ver-
sion 2, hence the version number 2.1.]
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think careful-
ly about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. A P P E N D I X When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free soft-
ware (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. 124 To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is mod-
ified by someone else and passed on, the recipients should know that what they have is not the original version, so that the origi-
nal author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company can-
not effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to per-
mit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software devel-
opers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license pro-
vides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license agreement applies to any software library or other program which contains a notice placed by the copyright hold-
er or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this license). Each license is addressed as "you". A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it con-
tains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running a program using the Library is not restrict-
ed, and output from such a program is covered only if its con-
tents constitute a work based on the library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the library does and what the program that uses the library does. 1. You may copy and distribute verbatim copies of the library's complete source code as you receive it, in any medium, pro-
vided that you conspicuously and appropriately publish on You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this license. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any appli-
cation-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the library, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the library, the dis-
tribution of the whole must be on the terms of this license, whose permissions for other licenses extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con-
test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the library. In addition, mere aggregation of another work not based on the library with the library (or with a work based on the library) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. A P P E N D I X 125 APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the library into a program that is not a library. 4. You may copy and distribute the library (or a portion or deriv-
ative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this license. However, linking a work that uses the library with the Library creates an executable that is a derivative of the Library
(because it contains portions of the library), rather than a work that uses the library. The executable is therefore cov-
ered by this license. Section 6 states terms for distribution of such executable. When a work that uses the library uses material from a head-
er file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if the work can be linked without the library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessories, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legal-
ly a derivative work. (Executable containing this object code plus portions of the library will still fall under Section 6.) Otherwise, if the work is a derivative of the library, you may distribute the object code for the work under the terms of Section 6. Any executable containing that work also fall under Section 6, whether or not they are linked directly with the library itself. 6. As an exception to the sections above, you may also combine or link a "work that uses the library" with the library to pro-
duce a work containing portions of the library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the library is used in it and that the Library and its use are covered by this license. You must supply a copy of this license. If the work during execution displays copyright notices, you must include the copyright notice for the library among them, as well as a reference directing the user to the copy of this license. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/or source code, so that the user can modify the library and then relink to produce a modified executable containing the modified library. (It is understood that the user who changes the contents of definitions files in the library will not necessarily be able to recompile the appli-
cation to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the exe-
cutable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. A P P E N D I X 126 For an executable, the required form of the "work that uses the library" must include any data and utility programs need-
ed for reproducing the executable from it. However, as a spe-
cial exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the exe-
cutable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normal-
ly accompany the operating system. Such a contradiction means you cannot use both them and the library together in an executable that you distribute. 7. You may place library facilities that are a work based on the library side-by-side in a single library together with other library facilities not covered by this license, and distribute such a combined library, provided that the separate distribu-
tion of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the library except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the library is void, and will automatically termi-
nate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to mod-
ify or distribute the library or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the library (or any work based on the library), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distributing or modifying the library or works based on it. 10.Each time you redistribute the library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or mod-
ify the library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this license. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this license, they do not excuse you from the con-
ditions of this license. If you cannot distribute so as to satis-
fy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the library at all. For example, if a patent license would not permit royalty-free redistribution of the library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution sys-
tem which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a license cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 12.If the distribution and/or use of the library is restricted in cer-
tain countries either by patents or by copyrighted interfaces, the original copyright holder who places the library under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the library specifies a version number of this license which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. A P P E N D I X 127 To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. one line to give the library's name and a brief idea of what it does. Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the license, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make excep-
tions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new libraries If you develop a new library, and you want it to be of the great-
est possible use to the public, we recommend making it free soft-
ware that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). A P P E N D I X 128 MOZILLA PUBLIC LICENSE Version 1.1
1.Definitions. 1.0.1. Commercial use means distribution or otherwise making the covered code available to a third party. 1.1. Contributor means each entity that creates or con-
tributes to the creation of modifications. 1.2. 1.3. 1.4. Contributor version means the combination of the orig-
inal code, prior modifications used by a contributor, and the modifications made by that particular contributor. Covered code means the original code or modifications or the combination of the original code and modifications, in each case including portions thereof. Electronic distribution mechanism means a mechanism generally accepted in the software development communi-
ty for the electronic transfer of data. 1.5. Executable means covered code in any form other than source code. 1.6. 1.7. Initial developer means the individual or entity identified as the initial Developer in the Source Code notice required by exhibit A. Larger work means a work which combines covered code or portions thereof with code not governed by the terms of this License. 1.8. License means this document. 1.8.1. Licensable means having the right to grant, to the maxi-
mum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.9. Modifications means any addition to or deletion from the substance or structure of either the original code or any previous modifications. When covered code is released as a series of files, a modification is:
A. Any addition to or deletion from the contents of a file containing original code or previous modifications. B. Any new file that contains any part of the original code or previous modifications. 1.10. Original code means source code of computer software code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.10.1.Patent claims means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent licensable by grantor. 1.11. Source code means the preferred form of the covered code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable, or source code differential comparisons against either the original code or another well known, available covered code of the contributor's choice. The source code can be in a compressed or archival form, pro-
vided the appropriate decompression or de-archiving soft-
ware is widely available for no charge. 1.12. You (or Your) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this license or a future version of this license issued under section 6.1. For legal entities, You includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, control means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) own-
ership of more than fifty percent (50%) of the outstand-
ing shares or beneficial ownership of such entity. 2. Source Code License. 2.1. The initial developer grant. The initial developer hereby grants You a world-wide, roy-
alty-free, non-exclusive license, subject to third party intel-
lectual property claims:
a) under intellectual property rights (other than patent or trademark) licensable by initial developer to use, repro-
duce, modify, display, perform, sublicense and distrib-
ute the original code (or portions thereof) with or with-
out modifications, and/or as part of a larger work; and
(b) under patents claims infringed by the making, using or selling of original code, to make, have made, use, prac-
tice, sell, and offer for sale, and/or otherwise dispose of the original code (or portions there of). A P P E N D I X 129 APPENDIX
(c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license.
(d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each contributor hereby grants You a world-wide, royalty-free, non-exclusive license
(a) under intellectual property rights (other than patent or trademark) licensable by contributor, to use, reproduce, modify, display, perform, sublicense and distribute the modifications created by such contribu-
tor (or portions thereof) either on an unmodified basis, with other modifications, as covered code and/or as part of a larger work; and
(b) under patent claims infringed by the making, using, or selling of modifications made by that contributor either alone and/or in combination with its contributor version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) modifications made by that contributor
(or portions thereof); and 2) the combination of mod-
ifications made by that contributor with its contributor version (or portions of such combination).
(c) the licenses granted in sections 2.2(a) and 2.2(b) are effective on the date contributor first makes commer-
cial use of the covered code.
(d) Notwithstanding section 2.2(b) above, no patent license is granted: 1) for any code that contributor has deleted from the contributor version; 2) separate from the contributor version; 3) for infringements caused by: i) third party modifications of contributor version or ii) the combination of modifications made by that contributor with other software (except as part of the contributor version) or other devices; or 4) under patent claims infringed by covered code in the absence of modifications made by that contributor. 3. Distribution Obligations. 3.1. Application of license. The modifications which You create or to which you con-
tribute are governed by the terms of this license, including without limitation section 2.2. The source code version of covered code may be distributed only under the terms of this license or a future version of this license released under section 6.1, and you must include a copy of this license with every copy of the source code you distribute. You may not offer or impose any terms on any source code version that alters or restricts the applicable version of this license or the recipients' rights hereunder. However, you may include an additional document offering the additional rights described in section 3.5. 3.2. Availability of source code. Any modification which you create or to which you con-
tribute must be made available in source code form under the terms of this license either on the same media as an executable version or via an accepted electronic distribu-
tion mechanism to anyone to whom you made an exe-
cutable version available; and if made available via elec-
tronic distribution mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular modification has been made available to such recipients. You are responsible for ensur-
ing that the source code version remains available even if the electronic distribution mechanism is maintained by a third party. 3.3. Description of modifications. 3.4. You must cause all covered code to which you contribute to contain a file documenting the changes You made to create that covered code and the date of any change. You must include a prominent statement that the modification is derived, directly or indirectly, from original code provided by the initial developer and including the name of the initial developer in (a) the source code, and (b) in any notice in an executable version or related documentation in which you describe the origin or ownership of the covered code. Intellectual property matters
(a) Third party claims. If contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such contributor under sections 2.1 or 2.2, contributor must include a text file with the source code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If contributor obtains such knowledge after the modification is made available as described in section 3.2, contributor shall promptly modi-
fy the LEGAL file in all copies contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calcu-
lated to inform those who received the covered code that new knowledge has been obtained.
(b) Contributor APIs. If contributor's modifications include an application programming interface and contributor has knowledge of patent licenses which are reasonably necessary to implement that API, contributor must also include this information in the LEGAL file. A P P E N D I X 130
(c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Larger works. You may create a larger work by combining covered code with other code not governed by the terms of this license and distribute the larger work as a single product. In such a case, you must make sure the requirements of this license are fulfilled for the covered code. 3.5. Required notices. 4. Inability to comply due to statute or regulation. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A. you must also duplicate this license in any documentation for the source code where You describe recipients' rights or ownership rights relating to covered code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of covered code. However, you may do so only on your own behalf, and not on behalf of the Initial developer or any contributor. You must make it absolutely clear than any such warranty, support, indemni-
ty or liability obligation is offered by you alone, and You hereby agree to indemnify the Initial developer and every contributor for any liability incurred by the Initial develop-
er or such contributor as a result of warranty, support, indemnity or liability terms you offer. 3.6. Distribution of executable versions. You may distribute covered code in executable form only if the requirements of section 3.1-3.5 have been met for that covered code, and if you include a notice stating that the source code version of the covered code is available under the terms of this license, including a description of how and where you have fulfilled the obligations of section 3.2. The notice must be conspicuously included in any notice in an executable version, related documentation or collateral in which you describe recipients' rights relating to the covered code. You may distribute the executable version of covered code or ownership rights under a license of your choice, which may contain terms different from this license, provided that you are in compliance with the terms of this license and that the license for the exe-
cutable version does not attempt to limit or alter the recip-
ient's rights in the source code version from the rights set forth in this license. If you distribute the executable ver-
sion under a different license you must make it absolutely clear that any terms which differ from this license are offered by you alone, not by the Initial developer or any contributor. You hereby agree to indemnify the initial developer and every contributor for any liability incurred by the initial developer or such contributor as a result of any such terms You offer. If it is impossible for you to comply with any of the terms of this license with respect to some or all of the covered code due to statute, judicial order, or regulation then you must: (a) comply with the terms of this license to the max-
imum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in section 3.4 and must be included with all distributions of the source code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this license. This license applies to code to which the initial developer has attached the notice in exhibit A and to related covered code. 6. Versions of the license. 6.1. New versions. Netscape communications corporation (Netscape) may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. 6.2. Effect of new versions. Once covered code has been published under a particular version of the license, you may always continue to use it under the terms of that version. You may also choose to use such covered code under the terms of any subsequent version of the license published by netscape. No one other than netscape has the right to modify the terms applicable to covered code created under this license. 6.3. Derivative works. If You create or use a modified version of this license
(which you may only do in order to apply it to code which is not already covered code governed by this license), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL",
"NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this license) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public license and netscape Public License. (Filling in the name of the initial developer, original code or con-
tributor in the notice described in exhibit A shall not of themselves be deemed to be modifications of this license.) A P P E N D I X 131 APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COV-
ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFOR-
MANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This license and the rights granted hereunder will terminate automatically if you fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the covered code which are properly granted shall survive any termination of this license. Provisions which, by their nature, must remain in effect beyond the termination of this license shall survive. 8.2. If you initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against ini-
tial developer or a contributor (the initial developer or contributor against whom you file such action is referred to as Participant) alleging that:
(a) such participant's contributor version directly or indi-
rectly infringes any patent, then any and all rights granted by such participant to you under sections 2.1 and/or 2.2 of this license shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice you either: (i) agree in writing to pay participant a mutually agreeable reasonable royalty for your past and future use of modifications made by such participant, or (ii) withdraw your litigation claim with respect to the contributor version against such participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by partici-
pant to you under sections 2.1 and/or 2.2 automati-
cally terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such par-
ticipant's contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such participant under sections 2.1(b) and 2.2(b) are revoked effective as of the date you first made, used, sold, distributed, or had made, modifications made by that participant. 8.3. If you assert a patent infringement claim against partici-
pant alleging that such participant's contributor version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the rea-
sonable value of the licenses granted by such participant under sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by you or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DIS-
TRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITH-
OUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNC-
TION, OR ANY AND ALL OTHER COMMERCIAL DAM-
AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-
AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULT-
ING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-
AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The covered code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4
(June 1995), all U.S. Government end users acquire cov-
ered code with only those rights set forth herein. A P P E N D I X 132 11. MISCELLANEOUS. EXHIBIT A -Mozilla Public License. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions
(except to the extent applicable law, if any, provides oth-
erwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the united states of america, any litigation relating to this License shall be subject to the jurisdiction of the federal courts of the northern district of california, with venue lying in santa clara county, california, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the united nations convention on contracts for the International sale of goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this license. 12. RESPONSIBILITY FOR CLAIMS. As between initial developer and the contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this license and you agree to work with initial developer and contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial developer may designate portions of the covered code as "Multiple-Licensed". "Multiple-Licensed" means that the initial developer permits you to utilize portions of the covered code under your choice of the NPL or the alternative licenses, if any, specified by the initial developer in the file described in exhibit A. The contents of this file are subject to the Mozilla Public License Version 1.1 (the license); you may not use this file except in compliance with the License. You may obtain a copy of the license at http://www.mozilla.org/MPL/
Software distributed under the license is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the license for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. Initial Developer The is___________________. Portions created by ______________________ are Copyright (C) _______________________. All Rights Reserved. the Original Code of Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] license are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] license and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] license. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] license."
NOTE: The text of this exhibit A may differ slightly from the text of the notices in the source code files of the original code. You should use the text of this exhibit A rather than the text found in the original code/source code for Your modifications. A P P E N D I X 133
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-06-25 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-06-25
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
32LG40UG
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD TV/MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ESTECH Co., Ltd.
|
||||
1 | Name |
Y**** J********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
j******@estech.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 16 21 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC