all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 2.41 MiB | / January 03 2009 | |||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | / January 03 2009 | ||||||
1 | Internal Photos | / January 03 2009 | ||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 2.41 MiB | / January 03 2009 |
Order Number Test Report Number
: GETEC-C1-09-010
: GETEC-E3-09-011 FCC Class B Certification APPENDIX H
: USERS MANUAL EUT Type: LCD TV/Monitor FCC ID.: BEJ42LG500HUA LCD TV PLASMA TV OWNERS MANUAL PLASMA TV MODEL 42PX8DC 42PG65C 42PG60C LCD TV MODELS 32LC5DC 32LC5DCS 32LC5DCB 37LC5DC 37LC5DCB 37LC5DC1 42LC5DC 32LX5DC 32LX5DCS 42LB5DC 32LC50C 32LC50CS 32LC50CB 32LX50C 32LX50CS 37LC50C 37LC50CB 42LB50C 42LC50C 32LG500H 37LG500H 42LG500H Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. www.lgcommercial.com WARNING / CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main-
tenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding sys-
tem of the building, as close to the point of the cable entry as practical. A WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is con-
nected.
- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 2 Do not use this apparatus near water. Clean only with dry cloth. 7 Only use attachments/accessories specified by the manufacturer. 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 4 5 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 1 SAFETY INSTRUCTION Never touch this apparatus or antenna during a thunder or lighting storm. 15 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. CAUTION concerning the Power Cord :
It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or elec-
tric shock. Do not overload wall outlets. Overloaded wall out-
lets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). 17 18 19 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock. (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grouned AC outlet) If grounding methods are not possible, have a qualified electri-
cian install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. Keep the product away from direct sunlight. 11 12 13 14 2 20 AANNTTEENNNNAASS OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg If an outdoor antenna is installed, follow the precau-
tions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to pro-
vide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to prop-
er grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding elec-
trode. AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700 Ground Clamp Antenna Lead in Wire Electric Service Equipment NEC: National Electrical Code Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC Art 250, Part H) 21 22 23 Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemi-
cals such as alcohol, thinners or benzene. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other mate-
rials (e.g.) plastic while plugged in. Do not install in excessively dusty places. 24 If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. 25 Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it. 3 OOnn DDiissppoossaall a. The fluorescent lamp used in this product con-
tains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. FEATURES OF THIS TV FOR LCD TV If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the moni-
tor's performance. Avoid touching the LCD screen or holding your fin-
ger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. PREPARATION ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please con-
tact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. INPUT ODE PUT ER TV TV P M O W MULTI LCD TV PLASMA TV Owner's Manual http://www.lgusa.com www.lg.ca Copyright 2007 LGE, All Rights Reserved. CD Manual Owners Manual, Setup & Operation Guide for Commercial Mode PIP EZ PIC S T RATIO T V PIP CH -
EZ SOUND B P O E W PIP CH +
SWAP C C DVD VC R D V D R PIP INPUT INFO VCR INPUT C C XIT M U EN E NTE RATIO R SAP RETURN ENTER MENU TIMER C H V O L INFO i P A PAGE C H G E INPUT TV INPUT MULTI P O W ER M ODE TV PIP EZ PIC PIP CH -
EZ SOUND DVD VC R PIP CH +
SWAP PIP INPUT INFO 1 4 MUTE 2 7 5 3 8 6 0 9 FLASHBK PIP SWAP SAP PIP INPUT PIP PIP CH-
PIP CH+
or C C EXIT M EN U RATIO SAP ENTER VOL TIMER 1 MUTE C H PAGE 1.5V 1.5V 4 2 7 5 3 8 6 0 9 FLASHBACK Remote Control, Batteries Power Cord
* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exteri-
or if there is stain or fingerprint on surface of the exterior. Polishing Cloth This feature is not available for all models.
* Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration. P R E P A R A T O N I 5 PREPARATION LLCCDD TTVV mmooddeell oonnllyy x 2 M4xL22 Torx plus Star head screw
(Refer to p.7, 15) OOppttiioonn EExxttrraass D-sub 15 pin Cable Protective Bracket and Bolt for Power Cord
(This feature is not available for all models.)
(Refer to P.12-13, 15) Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models Cable Management Cable Holder 1-Bolt for fixing the
(Refer to p.12)
(Refer to p.12-13) Cable Holder
(Refer to p.12-13) 4-Bolts for stand assembly
(Refer to p.16) Only 32/37LC5DC*, 32/37LC50C*models Only 32/37/42LG500H models x 4 x 4 or Bolts for stand assembly Screw for stand fixing
(Refer to P.15)
(Refer to P.19) Protection Cover Cable Holder Plug in type holder PPllaassmmaa TTVV mmooddeellss oonnllyy 75 ohm Round Cable D-sub 15 Pin Cable Cable Holder
(Except 42PG60C/65C)
(Except 42PG60C/65C)
(Except 42PX8DC) Only 42PG65C model Cable Management Clip x 4 Bolts for stand assembly
(Refer to P.14) P R E P A R A T O N I 6 CH VOL ENTER MENU INPUT CHANNEL Buttons VOLUME Buttons ENTER Button MENU Button INPUT Button POWER Button FRONT PANEL CONTROLS Here shown may be somewhat different from your TV. 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on. x 4 Tighten the stand with the four screws (provided as parts of the TV). or x 2 x 2 Tighten the two of these four screws and the two Torx plus star head screws (provid-
ed as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV). P R E P A R A T O N I 7 PREPARATION 32LX5DC*, 32LX50C*
Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on. 32/37/42LG500H CHCH VOLVOL ENTER ENTER MENUMENU INPUT INPUT ON/OFF ON/OFF ON/OFF Button INPUT Button MENU Button ENTER Button VOLUME Buttons CHANNEL Buttons Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. Remote Control Sensor POWER Button CH VOL ENTER MENU INPUT CHANNEL Buttons VOLUME Buttons ENTER Button MENU Button INPUT Button P R E P A R A T O N I 8 42PX8DC INPUT INPUT ENTER ENTER This TVs stand is sold, separately. INPUT MENU ENTER VOL CH POWER Button INPUT Button MENU Button ENTER Button VOLUME Buttons CHANNEL Buttons Remote Control Sensor Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on. 42PG60C, 42PG65C Remote Control Sensor POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. ENTER INPUT SSttaanndd (Only 42PG65C model) INPUT MENU MENU INPUT ENTER ENTER VOL VOL CH CH INPUT MENU ENTER VOL CH INPUT Button MENU Button ENTER Button VOLUME (-,+) Buttons CHANNEL (EE, DD) Buttons P R E P A R A T O N I 9 PREPARATION BACK PANEL INFORMATION Here shown may be somewhat different from your TV. 32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C S-VIDEO 32LX5DC*, 32LX50C*
P R E P A R A T O N I 11 ANTENNA IN M.P.I. 8 R I OO D U A O N O M L
O E D V I AV IN 2 42PX8DC 8 O E D V S
I O E D V I O N O M L
R I O D U A R AV IN 2 11 42PG60C, 42PG65C 32/37/42LG500H ANTENNA IN M.P.I. R 8 S-VIDEO R I O D U A O N O M L
O E D V I AV IN 2
( ) 11
( ) 11 ANTENNA IN ANTENNA IN M.P.I.M.P.I. 12 13 ANTENNA IN M.P.I. 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C, 32LX5DC*, 32LX50C*, 42PX8DC
( ) 2 1
( ) 4 3 M.P.I. DIGITAL AUDIO OUT
(OPTICAL) 2 9 VIDEO COMPONENT IN AUDIO S-VIDEO RESET
( ) REMOTE CONTROL OUT UPDATE SERVICE ONLY 6 RGB IN 8
) MONO AUDIO AV IN 1 VIDEO SPEAKER 7 OUT AUDIO IN HDMI/DVI IN 1(DVI) 10 RJP INTERFACE 10 8 AV IN 2 S-VIDEO R I O O D U A A O N O M L
O E D V I 8 R 11 S-VIDEO R I O D U A O N O M L
O E D V I AV IN 2
( ) 5 42PG60C, 42PG65C 6 10 7 2 RGB IN RGB(PC) AUDIO
(RGB / DVI) RJP INTERFACE SPEAKER OUT 8 DIGITAL AUDIO OUT OPTICAL REMOTE CONTROL OUT SERVICE ONLY RESET UPDATE 4 1 HDMI IN 2 1 COMPONENT IN L R O E D V S
I AUDIO VIDEO L
) MONO R 1 N I V A DVI IN VIDEO AUDIO 9 5 8 32/37/42LG500H 1 4 HDMI/DVI IN 6 2 7 OPTICAL DIGITAL AUDIO OUT SPEAKER OUT 8 RESET UPDATE 1(DVI) 2 RJP INTERFACE I N RGB(PC) B G R AUDIO
(RGB/DVI) RS-232C IN
(SERVICE ONLY) REMOTE CONTROL OUT 4 10 VIDEO COMPONENT IN AUDIO 1 N I V A S-VIDEO AUDIO L/MONO VIDEO 9 5 8 1 2 HDMI/DVI IN, HDMI IN Connect a HDMI (DVI) connection to either input. DIGITAL AUDIO OUT Connect digital audio from various types of equip-
ment. Note: In standby mode, these ports do not work. 3 13 M.P.I 8 9 AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. COMPONENT IN Connect a component video/audio device to these jacks. RESET/UPDATE/REMOTE CONTROL OUT 10 RJP INTERFACE 4 5 6 SERVICE ONLY RGB IN (PC) Connect the output from a PC. AUDIO IN (RGB, DVI) Connect the audio from a PC or DTV. 7 SPEAKER OUT 8 11 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 12 ANTENNA IN Connect over-the air signals to this jack. P R E P A R A T O N I 11 PREPARATION STAND INSTALLATION 32/37LC5DC*, 32/37LC50C*
42PG65C 1 Carefully place the product screen side down on a cushioned surface that will protect prod-
uct and screen from damage. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the product stand with the product as shown. NOTE GG After inserting the MPI slot/card, install the product stand. 2 Assemble the product stand with the product as shown. 3 Securely install the 4 bolts provided as shown below. 3 Tighten the 4 bolts securely using the holes in the back of the TV. P R E P A R A T O N I 16 ATTACHING THE TV TO A WALL This feature is not available for all models. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. Insert the TV brackets (or eye-bolts) and bolts to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. Use a sturdy rope (not provided as parts of the product, must pur-
chase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. SWIVEL STAND 20 (37LC5DC1, 42LC5DC, 42LC50C, 42PX8DC, 42LB5DC, 42LB50C, 42PG65C models) 90 (32LX5DC/S, 32LX50C/S, 32LC5DC/S, 32LC50C/S, 37LC5DC, 37LC50C, 32/37/42LG500H models) The TV can be conveniently swivelled on its stand 20or 90 to the left or right to provide the opti-
mum viewing angle. P R E P A R A T O N I 17 PREPARATION ATTACHING THE TV TO A DESK Here shown may be somewhat different from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially caus-
ing injury or damaging the product.
* SSccrreewwss -- MM55 xx LL ((ttaabbllee ddeepptthh ++ 88~1100 mmmm)) ex) table depth-15mm: Bolts - M5 x 25 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C P R E P A R A T O N I 18 4-Screws
(not provided as parts of the product) 32LX5DC*, 32LX50C*
4-Screws
(not provided as parts of the product) 2-Screws
(not provided as parts of the product) 42PX8DC 42PG65C 4-Screws
(not provided as parts of the product) 32/37/42LG500H 4-Screws
(not provided as parts of the product) Stand Desk Stand Stand Stand Stand Desk Desk 32/37/42LG500H 1-Screw
(provided as parts of the product) WARNING Stand Desk GG To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. This feature is not available for all models. Product Model LCD TV PLASMA TV 32LC5DC*, 32LC50C*, 32LX5DC*, 32LX50C*, 32LG500H 37LG500H, 42LG500H 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C 42PG60C 42PX8DC VESA
(A * B) 200 * 100 200 * 200 600 * 400 400 * 400 600 * 400 AA BB NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide. DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on each side from the wall. 4 inches Image shown may differ from your TV. This feature is not available for all models. 4 inches 4 inches 4 inches CAUTION GG Ensure adequate ventilation by following the clearance recommendations. P R E P A R A T O N I 19 PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments
(Connect to wall antenna socket) ANTENNA ANTENNA IN IN M.P.I. RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the bronze wire when connecting the antenna. ANTENNA ANTENNA IN IN M.P.I. RF Coaxial Wire (75 ohm) Antenna UHF VHF Signal Amplifier ANTENNA ANTENNA IN IN M.P.I. To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance. NOTE GG The TV will let you know when the analog, cable, and digital channel scans are complete. P R E P A R A T O N I 20 EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of external equipment setup mainly use picture for LCD TV(Except 32/37/42LG500H) models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the set. Match the jack colors
(Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set. 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) Select CCoommppoonneenntt input source with using the IINNPPUUTT button on the remote control. Y PB PR L R 1 2 DIGITAL AUDIO OUT
(OPTICAL) 2 M.P.I. HDMI/DVI IN 1(DVI) E X T E R N A L E Q U I P M E N T S E T U P RJP RFACE VIDEO COMPONENT IN AUDIO S-VIDEO
( ) Signal 480i 480p 720p 1080i 1080p Component HDMI1/DVI, HDMI2 Yes Yes Yes Yes Yes No Yes Yes Yes Yes
* 42LB5DC, 42LB50C model only 21 EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect 1 2 Connect the digital set-top box to HHDDMMII//DDVVII IINN 11((DDVVII)) or 22 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) HDMI/DVI IN 1(DVI) DIGITAL AUDIO OUT
(OPTICAL) 2 M.P.I RJP INTERFACE VIDEO COMPONENT IN AUDIO Select HHDDMMII11//DDVVII or HHDDMMII22 input source with using the IINNPPUUTT button on the remote control. 1 NOTE GG If the device does not support Auto HDMI, you need to set the output resolution appropriately. HDMI-DTV OUTPUT
( ) E X T E R N A L E Q U I P M E N T S E T U P 22 When connecting HDMI to DVI cable HDMI/DVI IN 1(DVI) DIGITAL AUDIO OUT
(OPTICAL) 2 M.P.I. RESET UPDATE REMOTE CONTROL OUT SERVICE ONLY RGB IN RJP INTERFACE VIDEO COMPONENT IN AUDIO S-VIDEO VIDEO
( ) MONO AUDIO AV IN 1 SPEAKER OUT 8 1 2 AUDIO IN
(RGB, DVI) DVI-DTV OUTPUT L R 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11((DDVVII)) or 22 jack on the set. Connect the audio output of the digital set-top box to the AAUUDDIIOO IINN ((RRGGBB,,DDVVII)) jack on the set. 2. How to use Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HHDDMMII11//DDVVII or HHDDMMII22 input source with using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 23 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO jacks on the set. Match the jack colors
(Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO jacks on the set. 2. How to use Turn on the DVD player, insert a DVD. Y PB PR L R 1 2 DIGITAL AUDIO OUT
(OPTICAL) 2 M.P.I. HDMI/DVI IN 1(DVI) Select CCoommppoonneenntt input source with using the IINNPPUUTT button on the remote control. Refer to the DVD player's manual for operating instructions. RJP ERFACE VIDEO COMPONENT IN AUDIO S-VIDEO
( ) Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr E X T E R N A L E Q U I P M E N T S E T U P 24 When connecting with an S-Video cable 1. How to connect S-VIDEO AUDIO L R 1 2 Connect the S-VIDEO output of the DVD to the SS --VVIIDDEEOO input on the set. Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the set. 2. How to use Turn on the DVD player, insert a DVD. Select AA VV 11 input source with using the IINNPPUUTT button on the remote control. If connected to AAVV IINN22, select AA VV 22 input source. Refer to the DVD player's manual for operating instructions. When connecting HDMI cable 1. How to connect 1 2 Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN 11((DDVVII)) or 22 jack on the set. No separated audio connection is necessary. HDMI supports both audio and video. 2. How to use Select HHDDMMII11//DDVVII or HHDDMMII22 input source with using the IINNPPUUTT button on the remote control.
( ) Refer to the DVD player's manual for operating instructions. NOTE GG If the device does not support Auto HDMI, you need to set the output resolution appropriately. GITAL UDIO OUT TICAL) M.P.I. 1 2 RESET UPDATE REMOTE CONTROL OUT S AUDIO S-VIDEO NT IN
) MONO AUDIO AV IN 1 VIDEO SPE O E X T E R N A L E Q U I P M E N T S E T U P HDMI/DVI IN 1(DVI) DIGITAL AUDIO OUT
(OPTICAL) 2 M.P.I RJP INTERFACE VIDEO COMPONENT IN AUDIO
( ) 1 HDMI-DVD OUTPUT 25 EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon. When connecting with an antenna ANTENNA ANTENNA IN IN M.PM.P.I..I. S-VIDEO VIDEO L R ANT OUT 1 OUTPUT SWITCH ANT IN 2 Wall Jack Antenna 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the AAnntteennnnaa socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) E X T E R N A L E Q U I P M E N T S E T U P 26
( ) When connecting with a RCA cable ANT IN S-VIDEO L R VIDEO 1. How to connect ANT OUT OUTPUT SWITCH 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) M.P.I. 2. How to use Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) TAL DIO UT CAL) M.P.I. RESET UPDATE 1 REMOTE CONTROL OUT SERV R AUDIO S-VIDEO T IN VIDEO
( ) MONO AUDIO AV IN 1 SPEAKE OUT 8 Select AA VV 11 input source with using the IINNPPUUTT button on the remote control. If connected to AAVV IINN22, select AA VV 22 input source. NOTE When connecting with an S-Video cable 1. How to connect M.P.I. GG If you have a mono VCR, con-
nect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the set. ANT IN S-VIDEO L R VIDEO E X T E R N A L E Q U I P M E N T S E T U P Connect the S-VIDEO output of the VCR to the SS --VVIIDDEEOO input on the set. ANT OUT OUTPUT SWITCH 1 2 Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the set. 2. How to use Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) Select AA VV 11 input source with using the IINNPPUUTT button on the remote control. GITAL AUDIO OUT PTICAL) M.P.I. 1 2 RESET UPDATE REMOTE CONTROL OUT SER AUDIO S-VIDEO ENT IN VIDEO
( ) MONO AUDIO AV IN 1 SPEAK OUT 8 If connected to AAVV IINN22, select AA VV 22 input source. CAUTION NOTE GG The picture quality is improved: compared to normal composite (RCA cable) input. GG Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. 27 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use Select AA VV 22 input source with using the IINNPPUUTT button on the remote control. If connected to AAVV IINN11 input, select AA VV 11 input source. Operate the corresponding external equipment. Camcorder Video Game Set VIDEO L R 1 S-VIDEO R I O D U A O N O M L
O E D V I AV IN 2 DIGITAL AUDIO OUTPUT Send the TVs audio to external audio equipment via the Digital Audio Output (Optical) port. 42LB5DC, 42LB50C i.e) 32/37/42LC5DC*, 32/37/42LC50C*, 1. How to connect 1 2 3 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (GG pp..5588). See the external audio equipment instruction manual for operation. NOTE GG When connecting with external audio equipments, such as ampli-
fiers or speakers, please turn the TV speakers off. (GG pp..5588) CAUTION GG Do not look into the optical output port. Looking at the laser beam may damage your vision. HDMI/DVI IN 1(DVI) DIGITAL AUDIO OUT
(OPTICAL) 2 1 M.P.I. RJP NTERFACE VIDEO COMPONENT IN AUDIO S-V
( ) 2 E X T E R N A L E Q U I P M E N T S E T U P 28 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable 1. How to connect 1 2 Connect the RGB output of the PC to the RRGGBB IINN jack on the set. Connect the PC audio output to the AAUUDDIIOO IINN
((RRGGBB,, DDVVII)) jack on the set. ATE REMOTE CONTROL OUT
( ) SERVICE ONLY RGB IN VIDEO
( ) MONO AUDIO AV IN 1 SPEAKER OUT 8 AUDIO IN
(RGB, DVI) 2. How to use Turn on the PC and the set. Select RRGGBB--PPCC input source with using the IINNPPUUTT button on the remote control. 2 1 When connecting HDMI to DVI cable RGB OUTPUT AUDIO 1. How to connect 1 2 Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN 11((DDVVII)) jack on the set. HDMI/DVI IN 1(DVI) Connect the PC audio output to the AAUUDDIIOO IINN
((RRGGBB//DDVVII)) jack on the set. DIGITA AUDIO OUT
(OPTICA 2 VICE ONLY RGB IN 2. How to use Turn on the PC and the set Select HHDDMMII11//DDVVII input source with using the IINNPPUUTT button on the remote control. AUDIO IN
(RGB, DVI) RJP INTERFACE
( ) VIDEO COMPONENT ER
( ) 1 2 DVI-PC OUTPUT AUDIO
( ) E X T E R N A L E Q U I P M E N T S E T U P
( ) 29 EXTERNAL EQUIPMENT SETUP NOTES GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is pre-
sent, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. GG The synchronization input form for Horizontal and Vertical frequencies is separate. Supported Display Specifications (RGB/HDMI1-PC) Supported Display Specifications (HDMI2-DTV) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.469 640x480 800x600 1024x768 1280x768 1360x768 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 47.700 47.720 1366x768 47.130 70.08 59.94 72.80 75.00 56.25 60.31 72.18 75.00 60.00 70.06 75.02 60.00 59.799 59.658 720x480 1280x720 1920x1080i 31.500 31.469 44.960 45.000 33.720 33.750 60.00 59.94 59.94 60.00 59.94 60.00 Supported Display Specifications (Y, CB /PB, CR /PR) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 1280x720 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 Supported Display Specifications (RGB/HDMI1-DTV) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 1920x1080i 720x480 31.50 60.00 31.47(HDMI1-DTV:31.469) 59.94 1280x720 1920x1080i 44.96 45.00 33.72 33.75 59.94 60.00 59.94 60.00
* RGB-DOS mode only: 640x350
* Except 42PG60C/65C models in HDMI1-PC mode. E X T E R N A L E Q U I P M E N T S E T U P 30
* 42LB5DC, 42LB50C Supported Display Specifications (RGB/HDMI1-PC) Supported Display Specifications (HDMI2-DTV) Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution 640x350
(RGB only) 640x480 800x600 1024x768 1280x768 1360x768 31.469 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 47.700 47.720 1366x768 47.130 1280x1024
(RGB only) 1400x1050
(RGB only) 63.668 65.317 1600x1200 74.537 1920x1080 66.587 1920x1200 74.038 70.08 59.94 72.80 75.00 56.25 60.31 72.18 75.00 60.00 70.06 75.02 60.00 59.799 59.658 59.895 59.978 59.869 59.934 59.950 720x480 1280x720 1920x1080 31.500 31.469 44.960 45.000 33.720 33.750 67.500 60.00 59.94 59.94 60.00 59.94 60.00 60.00 Supported Display Specifications (Y, CB /PB, CR /PR) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 1280x720 1920x1080 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 60.00
* RGB-DOS mode only: 640x350 Supported Display Specifications (RGB/HDMI1-DTV) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 31.50 60.00 31.47(HDMI1-DTV:31.469) 59.94 1280x720 1920x1080 44.96 45.00 33.72 33.75 67.43(HDMI1-DTV:67.5) 59.94 60.00 59.94 60.00 59.94 E X T E R N A L E Q U I P M E N T S E T U P 31 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV1-
2, Component, RGB, HDMI1/DVI and HDMI2. MULTI Selects: RGB,HDMI1/DVI, HDMI2 and Component input sources. Adjusts brightness on screen. POWER INPUT TV INPUT MULTI MODE TV DVD VCR PIP PIP CH - PIP CH + PIP INPUT EZ PIC EZ SOUND SWAP INFO PIP Switches the sub picture Double Window or off mode. GG pp..4411--4422 CC MENU RATIO EXIT SAP PIP CH +/-
Changes the PIP channel. GG pp..4422 PIP INPUT Select the connected input source for the sub-picture. GG pp..4411 ENTER EZ PIC Selects the factory preset picture depend on the viewing environment. GG pp..4455 EZ SOUND Selects the factory preset sound for type of program. GG pp..5555 Exchange the main/sub images. GG pp..4422 Control video cassette recorders or DVD players. SWAP(or PIP SWAP) VCR/DVD control buttons NUMBER button
(DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASH BACK Tune to the last channel viewed. VOL TIMER MUTE CH PAGE 1 4 7 2 5 8 0 3 6 9 FLASH BACK W A T C H I N G T V
C H A N N E L C O N T R O L 32
(Only 42PG60C, 42PG65C, 32/37/42LG500H models) TV POWER DVD STB RATIO CC VCR INPUT MODE Select the remotes operating mode: TV, DVD, VCR (or STB). RATIO Change the aspect ratio. GG pp..4433--4444 CC Select a closed caption. GG pp..6622 (*In DTV/CADTV mode GG pp..6633) ENTER THUMBSTICK
(Up/Down/Left
/Right/ENTER) Navigate the on-screen menus and adjust the system set-
tings to your preference. RETURN MENU INFO i VOL 1 4 7 TIMER MUTE 2 5 8 0 CH P A G E 3 6 9 FLASHBK PIP SAP PIP CH-
PIP CH+ PIP SWAP PIP INPUT Installing Batteries EXIT(or RETURN) Clears all on-screen displays and returns to TV viewing from any menu. MENU Displays the main menu. INFO Display information at the top of the screen. VOLUME UP
/DOWN Increase/decrease the sound level. TIMER Select the amount of time before your TV turns off auto-
matically. GG pp..6699 MUTE Switch the sound on or off. GG pp..3344 CHANNEL UP/DOWN PAGE UP/DOWN Select available channels. Move from one full set of screen information to the next one. Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.5V AA batteries(or 1.5V AAA) Dont mix old or used batteries with new ones. Close cover. W A T C H I N G T V
C H A N N E L C O N T R O L 33 MOVIE & TV RATING Movie Rating (MPAA) -for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. 1 2 After inputting the password, use the DD or EE or or button to choose MMoovviiee RRaattiinngg. button and then use the DD or EE button to select GG, PP GG, PPGG--1133, RR, or Press the GG or or NNCC--1177 or XX. G (General audiences) PG (Parental guidance suggested) PG-13 (Parents strongly cautioned) R (Restricted) NC-17 (No one 17 and under admitted) X (Adult only) Blocking Off (Permits all programs) GG If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. 3 Press EEXXIITT or RREETTUURRNN button to return to TV view-
ing or press MMEENNUU button to return to the previous menu. Downloadable Rating 1 2 3 4 After inputting the password, use the DD or EE or button to choose DDoowwnnllooaaddaabbllee RRaattiinngg. or Press the GG or button and then use the DD or EE or button to select DDiimm00, DDiimm11, DDiimm22, or DDiimm33. or Press the GG or or button and then use the DD or EE button to select DD11LL11, DD11LL22, or DD11LL33. or Press EEXXIITT or RREETTUURRNN button to return to TV viewing or press MMEENNUU button to return to the previous menu. SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block Downloadable Rating 1 SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel Movie Rating G TV Rating-Children TV Rating-General Aux. Block Downloadable Rating G PG PG-13 R NC-17 X Blocking Off 2 For Canada Lock System Set Password Block Channel TV Rating-English TV Rating-French Aux. Block Downloadable Rating 1 Downloadable Rating Dim0 Dim1 Dim2 Dim3 For USA Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block Downloadable Rating Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block Downloadable Rating G NOTE GG This function may become available in the future and will be available only for digital channel signal. GG This function operates only when TV has received Region5 Rating data. GG Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 2 P A R E N T A L C O N T R O L
R A T I N G 77 PARENTAL CONTROL /RATINGS TV Rating Children -for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. 1 2 After inputting the password, use the DD or EE or or button to choose TTVV RRaattiinngg--CChhiillddrreenn. Press the GG or or button and then use the DD or EE or button to select AA gg ee, or FFaannttaassyy VViioolleennccee. button and then use the DD or EE or Press the GG or or button to select block options. Age (applies to TV-Y, TV-Y7) Fantasy Violence (applies to TV-Y7) 3 Press EEXXIITT or RREETTUURRNN button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV Rating General -for USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. 1 2 After inputting the password, use the DD or EE or or button to choose TTVV RRaattiinngg--GGeenneerraall. Press the GG or button and then use the DD or EE or button to select AA gg ee, DDiiaalloogguuee, LLaanngguuaaggee, or SS ee xx or VViioolleennccee. Press the GG or button and then use the DD or EE or or button to select block options. Age (applies to TV-G,TV-PG,TV-14,TV-MA) Dialogue-sexual dialogue (applies to TV-PG,TV-14) Language-adult language (applies to TV-PG,TV-14,TV-MA) Sex-sexual situations (applies to TV-PG,TV-14,TV-MA) Violence (applies to TV-PG,TV-14,TV-MA) 3 Press EEXXIITT or RREETTUURRNN button to return to TV viewing or press MMEENNUU button to return to the previous menu. P A R E N T A L C O N T R O L
R A T I N G 78 SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block Downloadable Rating SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel Movie Rating TV Rating-Children G TV Rating-General Aux. Block Downloadable Rating Age Fantasy Violence 1 2 SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block Downloadable Rating SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General G Aux. Block Downloadable Rating Age Dialogue Language Sex Violence 1 2 TV Rating English - for CANADA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. 1 2 After inputting the password, use the DD or EE or or button to choose TTVV RRaattiinngg--EEnngglliisshh. Press the GG or button and then use the DD or EE or button to select EE, CC, CC88++, GG, PPGG, 1144++, 1188++, or SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel TV Rating-English TV Rating-French Aux. Block Downloadable Rating or BBlloocckkiinngg OOffff. E(Exempt) C(Children) C8+(Children eight years and older) G(General programming, suitable for all audiences) PG(Parental Guidance ) 14+(Viewers 14 years and older) 18+(Adult programming) Blocking Off(Permits all programs) 3 Press EEXXIITT or RREETTUURRNN button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV Rating French - for CANADA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel TV Rating-English G TV Rating-French Aux. Block Downloadable Rating E C C8+
G PG 14+
18+
Blocking Off 1 2 1 2 After inputting the password, use the DD or EE or or button to choose TTVV RRaattiinngg--FFrreenncchh. Press the GG or button and then use the DD or EE or button to select EE, GG, 88 aannss++, 1133 aannss++, 1166 aannss++, or 1188 aannss++, or BBlloocckkiinngg OOffff. E(Exempt) G(General) 8 ans+(General-Not convenient for little children) 13 ans+(Not convenient for children of 13 years and younger) 16 ans+(Not convenient for children of 16 years and younger) 18 ans+(This programs is only for adults) Blocking Off(Permits all programs) 3 Press EEXXIITT or RREETTUURRNN button to return to TV viewing or press MMEENNUU button to return to the previous menu. SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel TV Rating-English TV Rating-French Aux. Block Downloadable Rating SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Lock System Set Password Block Channel TV Rating-English TV Rating-French G Aux. Block Downloadable Rating E G 8 ans+
13 ans+
16 ans+
18 ans+
Blocking Off 1 2 P A R E N T A L C O N T R O L
R A T I N G 79 APPENDIX TROUBLESHOOTING TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy.. The remote control doesnt work Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Ensure that the correct remote operating mode is set: TV, VCR etc. Install new batteries. Power is suddenly turned off Is the sleep timer set?
Check the power control settings. Power interrupted. No broadcast on station tuned with Auto off activated. TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. No picture &No sound Check whether the product is turned on. Try another channel. The problem may be with the broadcast. Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location. Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. No or poor color or poor picture Horizontal/vertical bars or picture shaking Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. Try another channel. The problem may be with the broadcast. Are the video cables installed properly?
Activate any function to restore the brightness of the picture. Check for local interference such as an electrical appliance or power tool. Poor reception on some channels Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. Check for sources of possible interference. Lines or streaks in pictures Check antenna (Change the direction of the antenna). A P P E N D I X 80 TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product Press the VOL or VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly?
Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd)) The signal is out of range Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. Vertical bar or stripe on background &
Horizontal Noise &
Incorrect position Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color Check the signal cable. Reinstall the PC video card. A P P E N D I X 81 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence CAUTION GG If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. PRODUCT SPECIFICATIONS MODELS Dimensions
(Width x Height x Depth) With stand
(Only 42PG65C) Without stand 42PG60C
(42PG60C-UA) 41.1 x 26.7x 3.1 inches 1044.4 x680.5x 79.6mm Weight With stand Without stand
(Only 42PG65C) 55.1 pounds / 25.0 kg 42PG65C
(42PG65C-UA) 41.1 x 28.9 x12.1 inches 1044.4 x 735.4 x 308.0 mm 41.1 x 26.7x 4.2 inches 1044.4 x680.5x 107.6mm 61.2 pounds / 27.8 kg 55.1 pounds / 25.0 kg MODELS With stand Without stand Dimensions
(Width x Height x Depth) 32LG500H
(32LG500H-UA) 37LG500H
(37LG500H-UA) 42LG500H
(42LG500H-UA) 31.3 x 23.5 x 8.9 inches 797 x 597 x 227.3 mm 36.1 x 26.9 x 11.5 inches 918.6 x 684.8 x 293.4 mm 40.4 x 28.8 x 11.5 inches 1026.2 x 734.0 x 293.4 mm 31.3 x 21.9 x 3.9 inches 797 x 558.6 x 100.5 mm 36.1 x 24.9 x 3.4 inches 918.6 x 632.8 x 88 mm 40.4 x 27.0 x 4.4 inches 1026.2 x 687.9 x 111.8 mm Weight With stand Without stand 21.6 pounds / 9.82 kg 18.3 pounds / 8.34 kg 41.6 pounds / 18.8 kg 35.2 pounds / 15.9 kg 49.1 pounds / 22.3 kg 43.2 pounds / 19.6 kg A P P E N D I X 82 PRODUCT SPECIFICATIONS 32LC5DC/S/B
(32LC5DC/S/B-UA) 32LC50C/S/B
(32LC50C/S/B-UA) 37LC5DC/1/B
(37LC5DC/1/B-UA) 37LC50C/B
(37LC50C/B-UA) 42LC5DC
(42LC5DC-UA) 42LC50C Width x Height x Depth With Stand
(inches/mm) Without Stand Weight (pounds / kg) With Stand Without Stand Width x Height x Depth With Stand
(inches/mm) Without Stand Weight (pounds / kg) With Stand Without Stand Width x Height x Depth With Stand
(inches/mm) Without Stand
(42LC50C-UA) Weight (pounds / kg) With Stand Without Stand Width x Height x Depth With Stand
(inches/mm) Without Stand 32LX5DC/S
(32LX5DC/S-UA) 32LX50C/S
(32LX50C/S-UA) Weight (pounds / kg) With Stand Without Stand Width x Height x Depth With Stand
(inches/mm) Without Stand Weight (pounds / kg) With Stand Without Stand Width x Height x Depth With Stand
(inches/mm) Without Stand 42PX8DC
(42PX8DC-UA) 42LB5DC
(42LB5DC-UA) 42LB50C
(42LB50C-UA) Weight (pounds / kg) With Stand Without Stand 31.8 x 23.9 x 9.8 inches 806.6 x 607.5 x 249.0 mm 31.8 x 21.7 x 3.8 inches 806.6 x 552.3 x 97.2 mm 33.7 pounds / 15.3kg 27.6 pounds / 12.5 kg 36.5 x 27.4 x 10.4 inches 926.8 x 695.8 x 264.6 mm 36.5 x24.8 x 4.2 inches 926.8 x 629.8 x 107.4 mm 47.2 pounds / 21.4 kg 36.8 pounds / 16.7 kg 40.7 x 29.6 x 11.6 inches 1033.1 x 750.7 x 294.2 mm 40.7 x 27.0x 4.3 inches 1033.1 x 686.5 x 110.2 mm 61.3 pounds / 27.8 kg 47.2 pounds / 21.4 kg 36.3 x 24.2 x 11.3 inches 922.0 x 615.0x 288.0 mm 36.3 x 21.5 x 3.9 inches 922.0 x 546.0 x 98.0 mm 39.0 pounds / 17.7 kg 30.4 pounds / 13.8 kg 46.7 x 28.1 x 10.6 inches 1186.0 x 714.0 x 270.0 mm 46.7 x 25.7 x 3.9 inches 1186.0 x 654.0 x 99.0 mm 72.5 pounds / 32.9 kg 55.6 pounds / 25.2 kg 40.7 x 29.6 x 11.6 inches 1033.1 x 750.7 x 294.2 mm 40.7 x 27.0x 4.3 inches 1033.1 x 686.5 x 110.2 mm 61.3 pounds / 27.8 kg 47.2 pounds / 21.4 kg Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 83 APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 2 3 4 5 To find out whether your remote control can operate each device without programming, turn on the device
(such as a VCR) and press the corresponding mode button on the remote. After that, press the PPOOWWEERR button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The program-
ming procedures are explained below. Press the MMEENNUU and MMUUTTEE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. Press the MMEENNUU button to store the code. After blinking twice, this code is stored. Test the remote control functions to see if the device responds properly. If not, steps 2-5. Remote Control Code DVD Brand Codes 022 020 014 005 006 027 APEX DIGITAL DENON GE HARMAN KARDON JVC LG MAGNAVOX MARANTZ 012 001 010 016 025 013 024 A P P E N D I X 84 Brand MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 Brand Codes RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 006 011 015 007 005 006 019 008 009 018 010 016 025 Codes Brand Codes Brand Codes VCR Brand AIWA AKAI 034 016 043 046 124 125 146 072 031 033 103 AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 035 037 129 BROKSONIC 028 031 033 CANON 108 CAPEHART 003 040 135 CRAIG CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 132 136 012 045 004 018 026 034 043 063 137 150 DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI INSTANTREPLAY 031 033 031 033 JCL 012 013 015 033 JCPENNY 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 JENSEN JVC KENWOOD LG (GOLDSTAR) 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 SEARS SCOTT SAMSUNG SANSUI SANYO SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 TOTEVISION 040 UNITECH VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 YAMAHA ZENITH A P P E N D I X 85 APPENDIX SET ID Use this function to specify a TV ID number. 1 2 3 4 Press the MMEENNUU button and then use DD or EE or or button to select the OOPPTTIIOONN menu. Press the GG or button and then use DD or EE or or button to select SSeett IIDD. Press the GG or button and then use DD or EE or or button to adjust SSeett IIDD to choose the desired TV ID number. The adjustment range of Set ID is 1~99. Press EEXXIITT or RREETTUURRNN button to return to TV view-
ing or press MMEENNUU button to return to the previous menu. SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Aspect Ratio Caption/Text Caption Options Language ISM Method Low Power Set ID SETUP VIDEO AUDIO TIME OPTION SCREEN LOCK Aspect Ratio Caption/Text Caption Options Language ISM Method Low Power Set ID G 1 1 2 3 A P P E N D I X 86 0F 0B 08 98 79 0E 4C 1A 09 02 03 00 01 39 40 41 07 06 44 43 52 4D 5B 0A E1 E0 AA 60 72 71 61 63 IR CODES Code
(Hexa) Function Note Code
(Hexa) Function Note TV INPUT Remote control Button (Some models) D6 TV Discrete IR Code INPUT POWER MULTI RATIO TIMER Remote control Button
(TV Input Selection) Remote control Button (Power On/Off) C4 POWER ON Discrete IR Code Remote control Button (Some models)
(Only Power On) Remote control Button C5 POWER OFF Discrete IR Code Remote control Button 10-19 Number Key 0-9 Remote control Button 5A AV1
- (Dash) Remote control Button
(Only Power Off) Discrete IR Code
(AV1 Input Selection) FLASH BACK Remote control Button D0 AV2 Discrete IR Code MUTE VOL +
VOL -
CH + , CH - , CC DD , EE , FF , GG , ENTER MENU Remote control Button
(AV2 Input Selection) Remote control Button BF COMPONENT Discrete IR Code Remote control Button
(Component Input Selection) Remote control Button D5 RGB-PC Discrete IR Code Remote control Button
(RGB-PC Input Selection) Remote control Button CE HDMI1/DVI Discrete IR Code Remote control Button
(HDMI1/DVI Input Selection) Remote control Button CC HDMI2 Discrete IR Code Remote control Button Remote control Button Remote control Button Remote control Button
(HDMI2 Input Selection) 76 77 Ratio 4:3 Discrete IR Code
(Only 4:3 Mode) Ratio 16:9 Discrete IR Code EZ SOUND Remote control Button (Some models)
(Only 16:9 Mode) EZ PIC Remote control Button (Some models) AF Ratio Zoom Discrete IR Code
(Only Zoom1 Mode) EXIT, RETURN Remote control Button SAP Remote control Button Remote control Button (Some models) Remote control Button (Some models) INFO PIP PIP CH -
PIP CH +
Remote control Button Remote control Button Remote control Button Remote control Button PIP INPUT Remote control Button SWAP, PIP SWAP Remote control Button A P P E N D I X 87 Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive
(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :
EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950-1
; Radio Frequency Interference
; Electromagnetic Immunity
; Power Line Harmonics
; Voltage Fluctuations
; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO'99 (TCO'99 applied model only) Congratulations!
You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 01 Regulatory Information cont. Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?
The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues:
ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:
TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%
by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-
eating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict standards for disposal. TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**
Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one 02 Regulatory Information cont. exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________
* Bio-accumulative is defined as substances which accumulate in living organisms.
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. TCO03 (TCO03 applied model only) Congratulations!
The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:
Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields 03 Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/about/environment/html/Recycling.jsp Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-
Hndler oder einen Unternehmensvertreter von LG. 04 Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/about/environment/html/Recycling.jsp Franais Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :
http://www.lge.com/about/environment/html/Recycling.jsp Regulatory Information cont. Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/about/environment/html/Recycling.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que 05 respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/about/environment/html/Recycling.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar Regulatory Information cont. especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/about/environment/html/Recycling.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-
vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/about/environment/html/Recycling.jsp Russian 1994 LGE
' LG ',
. 06 Regulatory Information cont. K LGE
. LG.
http://www.lge.com/about/environment/html/Recycling.jsp EPA (EPA applied model only) ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) 07 Regulatory Information cont. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne 2002/96/EC. 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-
ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques ventuels pour l'environnement et la sant humaine. 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce produit. Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di 08 un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 2.Kaikki elektroniset laitteet ovat ongelmajtett, 1. joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten
, E O 2002/96/EOK. 2.H
. 3.H
. 4.
. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 09 Regulatory Information cont. Portuguese Hungarian Polish 10 Slovak Czech Croatian Regulatory Information cont. Estonian Latvian Lithuanian 11
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-01-19 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-01-19
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
42LG500HUA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K******** H******
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/01/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD TV MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
GUMI UNIVERSITY EMC CENTER
|
||||
1 | Name |
T**** P******
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@gumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC